Bruce Lawson recently asked for ways to style a definition list in the common glossary format. This is one way to do it.

Bruce’s original post – css challenge – describes what he is after: a “glossary style” appearance with the term on the left and the definitions on the right. Some terms will have multiple definitions, definitions of varying length, and each new term should appear on a new line. A definition list is semantically correct for this kind of information, so there was to be no fiddling around with the HTML, and the browser requirements were for it to work in all modern browsers and IE 6+.

You can skip straight to the demo where some additional classes are included in the HTML in order to highlight each term-definition association.

The basic HTML

The basic HTML structure is a simple definition list and nothing more. There are some short, long, and multiple definitions for each term.

<h1>Styling definition lists</h1>
<dl>
  <dt>Cheese</dt>
  <dd>
    <p>Velit esse cillum dolore in reprehenderit in voluptate duis aute irure dolor. Consectetur adipisicing elit, excepteur sint occaecat sunt in culpa. Velit esse cillum dolore eu fugiat nulla pariatur. Ut aliquip ex ea commodo consequat.</p>
    <p>Mollit anim id est laborum. Ut enim ad minim veniam, consectetur adipisicing elit, ullamco laboris nisi. Lorem ipsum dolor sit amet, sunt in culpa quis nostrud exercitation.</p>
  </dd>
  <dd>yummy!</dd>

  <dt>Building flexibility through spreading knowledge and self-organization, exploiting the productive lifecycle to experience a profound paradigm shift. Through the adoption of a proactive stance, the astute manager can adopt a position at the vanguard.</dt>
  <dd>balderdash</dd>;
  <dd>poppycock</dd>

  <dt>Aardvark</dt>
  <dd>never hurt anyone</dd>
</dl>

The styles

In order to get the required appearance in all browsers I had to use negative margins and a few conditional styles to get IE7 and IE6 to play along.

For the purposes of the demo I’ve placed all the styles in <style> blocks in the head of the document.

<style>
   dl {padding-left:300px;}
   dt {clear:both; float:left; width:260px; padding:10px; margin:0 0 2em -300px; font-weight:bold; color:#686663;}
   dd {float:left; width:100%; padding:10px 0; margin:0 0 2em;}
</styl>
<!--[if lte IE 7]>
<style>
   dt {display:inline; margin-bottom:0;}
   dd {float:none; width:auto;}
</style>
<![endif]-->

That’s it. The widths of the <dt> can be set in ems or percentages if the layout requires. The complete code is available in the demo and you are free to use this code.

This site has been written in HTML5 and used to use WordPress to manage the content. I’ll explain why I used HTML5, describe the structure of the theme templates, and show some of the ways I tried to tame WordPress’s tendency to add mess to the source code.

As this is my personal site I wanted to experiment with using HTML5, CSS3, and WAI-ARIA. All these documents are currently working drafts and subject to change. However, the web documents and applications of the future are going to be written in HTML5 and I wanted to see the benefits of using it to markup static documents. Using CSS 2.1, let alone the CSS3 selectors and properties that some browser vendors have implemented, has many advantages for controlling the presentation of semantically coded documents. For this reason I am not going to avoid using basic CSS 2.1 selectors just to faithfully reproducing this site’s design in IE6. However, I have tried to accommodate IE 7 and IE 8 users by using an HTML5 enabling script so that the new HTML5 elements can be styled in those browsers if users have Javascript enabled.

HTML5 templates

I started with a static prototype of this site developed on my local server. WordPress makes it very easy to create your own templates and, therefore, it is no problem to use HTML5. This theme only has 3 main templates: index, single, and archive. There are of course templates for 404s, attachments, comments, etc., but I won’t discuss them as they are all based on the 3 main templates. All the templates include ARIA roles as an accessibility aide.

The single.php template has this rough structure:

<!DOCTYPE html>
<html lang="en">
<head>
  <meta charset="utf-8">
  <title></title>
  <link rel="stylesheet" href="default.css">
</head>

<body>
  <header role="banner"></header>
  <nav role="navigation"></nav>
  <article role="main">
    <header>
      <time datetime="YYYY-MM-DD"></time>
      <h1></h1>
    </header>
    <footer></footer>
  </article>
  <nav></nav>
  <aside role="complementary"></aside>
  <footer role="contentinfo">
    <small></small>
  </footer>
</body>
</html>

The first line of the document is the HTML5 DOCTYPE. The new <article> element contains the content of each post. The same structure is used for the index.php template except that there are several articles displayed on each page and the ARIA role value of main is not used. In contrast, the archive.php template houses all the article excerpts in a <section> element with the ARIA role of main because the list of archived posts is itself the main content of the document.

A clean theme

WordPress tends to add classes, elements, and other bits of code in certain places. I haven’t used any of the WordPress functions that add class names to the body and to elements wrapping a post and also wanted to avoid cluttering the source code with any other unnecessary markup. This required a bit of fiddling around with the theme’s functions.php file. I’m not a PHP developer so this might not be pretty!

Removing actions from wp_head()

WordPress has a hook called wp_head that sits in the header.php of most themes. To avoid it inserting unwanted code into the <head> of the document I used the remove_action function to disable the functions that were responsible. The following code was added to the functions.php file of my theme:

// Remove links to the extra feeds (e.g. category feeds)
remove_action( 'wp_head', 'feed_links_extra', 3 );
// Remove links to the general feeds (e.g. posts and comments)
remove_action( 'wp_head', 'feed_links', 2 );
// Remove link to the RSD service endpoint, EditURI link
remove_action( 'wp_head', 'rsd_link' );
// Remove link to the Windows Live Writer manifest file
remove_action( 'wp_head', 'wlwmanifest_link' );
// Remove index link
remove_action( 'wp_head', 'index_rel_link' );
// Remove prev link
remove_action( 'wp_head', 'parent_post_rel_link', 10, 0 );
// Remove start link
remove_action( 'wp_head', 'start_post_rel_link', 10, 0 );
// Display relational links for adjacent posts
remove_action( 'wp_head', 'adjacent_posts_rel_link', 10, 0 );
// Remove XHTML generator showing WP version
remove_action( 'wp_head', 'wp_generator' );

Source: WPEngineer.com: Cleanup WordPress Header

Removing an empty <span>

If you want to create excerpts you can either write them into the excerpt box or use the <--more--> quicktag in the WordPress editor. I just wanted the first paragraph of my posts to be used as the excerpt and so using the in-editor tag was the most practical approach I was aware of. However, when you do this WordPress will insert an empty <span> in the post’s content. This element has an id so that the area following the excerpt can be targeted by “more” or “continue reading” links. I removed both the empty <span> and the jump link by adding the following code to the functions.php file of the theme:

// removes empty span
function remove_empty_read_more_span($content) {
  return eregi_replace("(<p><span id="more-[0-9]{1,}"></span></p>)", "", $content);
}
add_filter('the_content', 'remove_empty_read_more_span');

Source: Ganda Manurung: Remove Empty Span Tag On WordPress

// removes url hash to avoid the jump link
function remove_more_jump_link($link) {
  $offset = strpos($link, '#more-');
  if ($offset) {
    $end = strpos($link, '"',$offset);
  }
  if ($end) {
    $link = substr_replace($link, '', $offset, $end-$offset);
  }
  return $link;
}
add_filter('the_content_more_link', 'remove_more_jump_link');

Source: WordPress Codex: Customizing the Read More

Displaying images in the excerpt

For posts that display nothing but a photograph (yes, they will be shit but I’m hoping it gets me using my camera a bit more often) I wanted the image to show up in the archives. Equally, if the first paragraph of a post contained a link I wanted that to be preserved. The default the_excerpt() template tag doesn’t allow for this so it needed some modifying. I added a new function, which is just a modified version of the core excerpt function, to the functions.php file and then made sure that the template tag executed this function rather than the one contained in the core WordPress files.

function improved_trim_excerpt($text) {
   if ( '' == $text ) {
      $text = get_the_content('');
      $text = strip_shortcodes( $text );
      $text = apply_filters('the_content', $text);
      $text = str_replace(']]>', ']]>', $text);
      $text = strip_tags($text, '<p><img><a>');
      $excerpt_length = apply_filters('excerpt_length', 55);
      $words = explode(' ', $text, $excerpt_length + 1);
      if (count($words) > $excerpt_length) {
         array_pop($words);
         array_push($words, '[...]');
         $text = implode(' ', $words);
         $text = force_balance_tags($text);
      }
   }
   return $text;
}
remove_filter('get_the_excerpt', 'wp_trim_excerpt');
add_filter('get_the_excerpt', 'improved_trim_excerpt');

Source: Aaron Russell: Improving WordPress’ the_excerpt() template tag

Conditional next/prev links

I prefer not to have empty elements in the markup and so I needed a way to conditionally insert the “Older entries”, “Newer Entries”, etc., links into templates. The solution I’m using here, which isn’t perfect, is to add this to functions.php:

function show_posts_nav() {
  global $wp_query;
  return ($wp_query->max_num_pages > 1);
}

Source: Eric Martin: Conditional navigation links in WordPress

And then to wrap the navigation markup in the templates with the following:

<?php if (show_posts_nav()) : ?>
<nav>
   <ul>
      <li><?php next_posts_link('&#171; Older Entries') ?></li>
      <li><?php previous_posts_link('Newer Entries &#187;') ?></li>
   </ul>
</nav>
<?php endif; ?>

Summary

It’s fairly easy to create a simple site with HTML5 and to use WordPress to deliver it. At the moment there are issues with Internet Explorer because you cannot style HTML5 elements unless you use Javascript. However, HTML5 redefines the meaning of certain elements (such as <dl>, which has become a more versatile “description list”) and allows block elements to be wrapped in a link. Therefore, there is still benefit in using the HTML5 DOCTYPE even if you do not make use of the new elements.

Further reading

1. HTML5 working draft
2. HTML5 differences from HTML4
3. Accessible Rich Internet Applications (WAI-ARIA) 1.0

In the last few months there has been increased discussion about some of the new elements that have been introduced in the HTML5 draft specification. This entry is primarily a counter argument to some of the comments that I disagree with.

The most recent and high-profile comments in regard to parts of the HTML5 specification come from The HTML5 Super Friends in an article entitled Guide to HTML5 Hiccups. It lays out their concerns with the HTML5 draft specification as it stood at the time of its writing and I am largely going to focus on the issues they have discussed.

The article and section elements

The first argument that I disagree with is that the article and section elements are redundant and, therefore, that the article element should be dropped.

article and section are identical except that article allows a pubdate attribute. We would suggest that article be dropped and section be adapted to allow an optional pubdate attribute or, even better, more explicit metadata.

The article and section elements are not identical according the to HTML5 draft specification. Here is what it says about the section element as of 13 September 2009:

The section element represents a generic document or application section. A section, in this context, is a thematic grouping of content, typically with a heading, possibly with a footer.

Now contrast that with what it says about the the article element:

The article element represents a section of a page that consists of a composition that forms an independent part of a document, page, application, or site.

An article element is “independent” in the sense that its contents could stand alone, for example in syndication, or as a interchangeable component on a user-configurable portal page.

That is a clear distinction that resists the reading of article and section being “identical”. The article element has a specific purpose: to mark parts of a document that form an independent composition that may be appropriate for syndication. It is a special kind of sectioning element that performs an essential role that is lacking in the semantics of the generic section element. This generic element serves only to thematically group content. That grouping may occur at the document level, within an independent article, or within a footer.

The article element has unique semantics and practical use. There is a fundamental conceptual difference between stand-alone compositions and sections of compositions, documents, or pages and this difference should be recognised and catered for in the specification. Websites regularly employ microformats and you don’t have to look far to see independent compositions currently marked up with class="hentry" or find links to individual blog comments and twitter updates. There is clearly a need for an easy way to define independent compositions and that is met with the introduction of the article element in HTML5.

What may be needed is a stronger clarification and definition of the article element to minimise the potential for this distinction to be overlooked and to highlight the differences from a generic document section.

The hgroup element

The hgroup element is a relatively recent addition to the draft specification. It is defined as serving a fairly specific purpose:

The hgroup element represents the heading of a section. The element is used to group a set of h1–h6 elements when the heading has multiple levels, such as subheadings, alternative titles, or taglines.

The element works to associate headings together so that the highest ranked heading descendant (if present) of the hgroup element is used as its text in document outlines and summary. Other heading descendants are treated as subheadings and are left out of outlines.

The HTML5 Super Friends have this to say about the hgroup element:

We don’t see the added value of this element and would instead add a boolean attribute to the heading element which allows content authors to specify if that particular heading should be included in the outline.

Bruce Lawson has similar concerns and proposes another alternative – removing the need for a wrapping element and defining a new element specifically for marking up subtitles:

I agree that hgroup is clumsy and likely to be misused. Rather than wrap an h1 and its h2 subtitle in hgroup to keep the subtitle out of the outlining algorithm, I would prefer to use

<header>
<h1>My blog</h1>
<subtitle>My wit and wisdom</subtitle>
</header>

as I think that;s easier to understand than a heading-that’s-not-a-heading, and it removes a wrapping element.

I disagree with these criticisms of the hgroup element and consider the proposed alternatives to be more problematic, less intuitive, less flexible, and further removed from the way in which authors currently markup subheadings.

The way that many authors are currently marking up subheadings is by using headings of various ranks and in various orders depending on whether the subheading or qualifying heading needs to appear above or below the main page heading. A subheading is still, conceptually, a heading of sorts and it cannot be accurately marked up with a paragraph or any other currently available element.

Allowing the addition of a boolean attribute to heading elements has several problems.

1. A boolean attribute may be less intuitive for authors than the hgroup element. The hgroup element relies upon and produces an association between all the headings it contains. Since headings and subheadings occur together and derive their meaning from each other, it is semantic to wrap these headings in an element. We know that the highest ranked heading contains the string to be used in the outline and that the other headings serve as ranked subheadings to this primary heading. A boolean attribute is only associated with the element that it is a part of. We can create no association between the element and adjacent elements. This is related to the next issue.

2. The hgroup itself acts as heading content while a boolean attribute would act only to remove headings from the outline. The hgroup element only removes the descendant headings that are those not of the highest rank. The boolean attribute shifts the burden onto the author to decide which headings should be marked for removal from the outline, rather than providing an element to wrap a collection of headings without authors having to be concerned with (or aware of) issues of outlining.

What about Bruce Lawson’s idea for a subtitle element? I believe that, irrespective of the what this element were actually called, it suffers from similar problems to the idea of using a boolean attribute. There is nothing to prevent the use of a subtitle element away from a heading, it creates no association with other elements, and it does not allow for ranking of subheadings.

One of my key points in relation to criticism of the hgroup element is that subheadings draw their meaning from context. A subheading (as opposed to a section heading) is only a sub-heading if it is associated with a higher ranking heading. Remove the higher ranking heading and what was once a subheading is likely to be understood as a heading.

The strength of the hgroup element over the two alternative suggestions I have referenced is that it is the only proposal that defines a subheading as contextual. I think that it is the most intuitive proposal (although perhaps none of them are particularly inuitive) – the name of the element is self-descriptive and encapsulates the contextual relationship and adjacent positioning of its child elements — and matches most closely with the way that subheadings are currently marked up on many websites.

The aside element

The HTML5 Super Friends are of the opinion that the aside element is not worth including in the specification:

The use cases for aside are too limited to warrant its inclusion in the specification. We were also concerned about potentially duplicating content within an aside.

However, the specification itself provides some fairly compelling uses for the element:

The element can be used for typographical effects like pull quotes or sidebars, for advertising, for groups of nav elements, and for other content that is considered separate from the main content of the page.

Authors might use the aside element for their blogrolls, for marking up adverts ranging from google ads on blogs to large banners on enterprise websites, for expanding on themes within an article or providing an extended definition of a term, for pull quotes, and anything else “tangentially related to the content around the aside element, and which could be considered separate from that content”.

Most of these uses would not involve duplication of content. Using the aside element for pull quotes would produce some instances of content duplication. However, this is not really a problem for users who are used to content being duplicated in this way in newspapers and magazines. It would not take much for search engines to adapt to deal with short amounts of duplicate content contained within an aside either. While I appreciate the point about duplicate content I’m not yet convinced that it is actually problematic.

The legend element

The current specification defines the legend element as providing an explanatory caption for the contents of its parent element. The parent element may be a fieldset, figure or details element. However, Remy Sharp‘s article entitled legend not such a legend anymore shows why it is not practical to use legend for the new elements details and figure – because it is not backwards compatible with current browsers and effectively unusable outside of a fieldset because of the inability to style the element.

In this case, forging a new element is most appropriate rather than trying to use an element like label which will only create confusion with little advantage.

Summary

I have discussed my reasons for disagreeing with certain feedback on the HTML5 draft specification. I have yet to be convinced that the article, hgroup, or aside elements should be dropped from the specification because it seems to me that they have necessary uses and advantages over alternatives.

This week UCL have updated their homepage with a new design that I translated into XHTML, CSS, and Javascript.

UCL will gradually be updating other parts of their website as they move forward. You can read the UCL blog post about their new homepage and the history of the UCL homepage.

I was responsible for producing the XHTML, CSS, and Javascript that makes up the templates for this redesign. The members of UCL’s Web Services team then integrated the templates (and modified them as required) into their CMS.

This morning hundreds of ladybirds were flying through the air and massing on the white walls of the house. I managed to get a few clear macro photographs.

The sun was shining and the ladybirds seemed to be attracted to anything white. I stuck a white T-shirt on and headed outside. Pretty soon I was covered in them and could pluck them from my shirt to get some close ups using my little Canon IXUS 60.

At some point a ladybird took off just before I tried to photograph it and I decided I’d try to capture that moment. A few minutes later I’d worked out that I could prompt one of the insects to walk up my finger like the stem of a flower, that they’d take off when they reached the tip, and that they took up a distinct posture just before their wing-case shot open.

The speed at which they prepare to take off, open their wings, and fly away is so quick that I just had to take the shot as soon as I saw a ladybird get into the “take-off position” and hope that I reacted fast enough to get a picture of the open wing-case.

Most people I know hate and fear wasps. I’ve always been intrigued by them; they are quite beautiful looking insects – social insects – that have an important role in ecosystems. Their nests are incredible and I found and photographed a large nest constructed this year in our roof cavity.

This nest is about the diameter of a football (soccer ball) and gives you an idea of the intricate structure of a wasp nest made up of thousands of thin fans of paper-like material.

Unlike honey bees, wasps do not have wax-producing glands and those that make these kinds of nests construct them from a substance derived from wood pulp. They usually chew on dead or weathered wood and you can sometimes find wasps stripping thin layers from man-made wooden objects like park benches, panelling on houses, or exposed window frames. Wasps mix this wood with saliva to produce a paper-like material that is used to construct their nest.

You can see how each fanned layer of paper is made up of bands of different colour. This is presumably because the layers been progressively built up by wasps returning with wood pulp sourced from different types and colours of wood.

The final effect is really beautiful and it’s impressive to think that this kind of large organised structure, which houses the queen’s larvae in combs and regulates temperature, is the result of thousands of individual wasps working together. It is only used for one season before being abandoned as the winter approaches and the majority of the colony dies from cold.

Over the weekend two new HTML5 elements – summary and figcaption – were added to the draft specification. The introduction of summary and figcaption marks the acceptance that new elements are needed to act as captions or legends for the details and figure elements. The addition of the figcaption element finally begins to clear up the difficulty in marking-up figure element captions and looks to cement the place of the figure element in the HTML5 specification. The summary element does much the same for the details element but the very nature of the details element itself means that its future is not yet clear.

The figcaption element

This new element acts as the optional caption or legend for any content contained within its parent figure element.

If there is no figcaption element within a figure element then there is no caption for the rest of its content. If there is a figcaption element then it must be the first or last child of the figure element and only the first figcaption element (should there be more than one child figcaption of the parent figure element) represents a caption.

The figure element is used to mark up any self-contained content that may be referenced from the main flow of a document but could also be removed from the primary content (for example, to an appendix) without affecting its flow. This makes it suitable for various types of content ranging from graphs and data tables to photographs and code blocks.

<p><a href="#fig-ftse">Figure 1</a> shows the extent of the collapse in the markets and how recovery has been slow.</p>

<figure id="fig-ftse">
  <figcaption>Figure 1. The value of the FTSE 100 Index from 1999&ndash;2009.</figcaption>
  <img src="ftse-100-index-graph.jpg" alt="The index hit a record high at the end of 1999 and experienced two significant drops in the following last decade.">
</figure>

<p>This latest financial crisis hasn't stopped Alex from writing music and his latest track is actually worth listening to.</p>

<figure>
  <audio src="what-am-i-doing.mp3" controls></audio>
  <figcaption><cite>What am I doing?</cite> by Alex Brown</figcaption>
</figure>

The creation of the figcaption element is an important step forward for the HTML5 draft specification as it finally provides a reliable means to markup the caption for content that is best marked up as a figure. Previous attempts to use the legend element, the caption element, and the dt and dd elements had failed due to a lack of backwards compatibility when it came to styling these elements with CSS.

The summary element

This new element represents a summary, caption, or legend for any content contained within its parent details element.

The summary element must be the first child of a details element and if there is no summary element present then the user agent should provide its own. The reason for this is because the details element has a specific function – to markup additional information and allow the user to toggle the visibility of the additional information. Although it is not specified in the specification, it is expected that the summary element will act as the control that toggles the open-closed status of the contents of the parent details element.

<details>
  <summary>Technical details.</summary>
  <dl>
    <dt>Bit rate:</dt> <dd>190KB/s</dd>
    <dt>Filename:</dt> <dd>drum-and-bass-mix.mp3</dd>
    <dt>Duration:</dt> <dd>01:02:34</dd>
    <dt>File size:</dt> <dd>78.9MB</dd>
  </dl>
</details>

The introduction of the summary element seems to secure the future of the details element and the new behaviour that it affords, for now. When user agents begin to add support for the details element you won’t need JavaScript, or even CSS, to have expanding or collapsing sections in an HTML document.

The future of the details element

There will continue to be some debate over the inclusion of behaviour in an HTML specification especially given the widespread use of JavaScript to provide the expand-collapse functionality that details describes.

The details element writes some quite significant behaviour into an HTML document and I can see it being abused to provide generic expand-collapse functionality throughout a document. It is also not entirely clear what purpose the details element actually serves other than being an attempt to bypass the need for JavaScript or CSS to expand or collapse sections of a document.

There has been a general softening of the rough distinction between content, presentation, and behaviour. JavaScript libraries are being used to patch holes in browser CSS and HTML5 support, the CSS3 modules introduce plenty of behaviour that was previously only possibly with JavaScript, and the HTML5 specification is also introducing functionality and behaviour that previously required the use of JavaScript.

The future survival of the details element, and the behaviour associated with it, may well depend on browser implementations and author applications over the coming months.

This is a quick experiment that reproduces an image from I Love Typography using semantic HTML, CSS 2.1, a little CSS3. Along the way, I learnt about a few modern browser bugs and inconsistencies.

• See the demo: CSS typography experiment.
• See the bugs: Some new CSS 2.1 and CSS3 bugs in modern browsers.

I came across an image on I Love Typography that I thought could be reproduced using only semantic HTML and CSS.

The idea was to reproduce the image from simple markup, and to rely as much as possible on what can be achieved with CSS.

This is the HTML I ended up using.

<p>I love <strong>typography</strong> <em>a lot</em></p>

This is the CSS that controls the presentation of that content.

body {
  padding: 0;
  margin: 0;
  font-family: Times New Roman, serif;
  background: #000;
}

p {
  position: relative;
  width: 1100px;
  padding: 100px 0 0;
  margin: 0 auto;
  font-size: 175px;
  font-weight: bold;
  line-height: 1.2;
  letter-spacing: -13px;
  color: #0caac7;
  transform: rotate(-20deg);
}

/* "i" */
p:first-letter {
  float: left;
  margin: -137px -20px 0 0;
  font-size: 880px;
  line-height: 595px;
  text-transform: lowercase;
}

/* "love" */
p:first-line {
  font-size: 200px;
}

/* "typography" */
p strong {
  display: block;
  margin: -80px 0 0;
  font-weight: normal;
  letter-spacing: -2px;
  text-transform: capitalize;
}

p strong:first-letter {
  margin-right: -30px;
  color: #fff;
}

/* "a lot" */
p em {
  position: absolute;
  z-index: 10;
  top: 100px;
  left: 147px;
  width: 136px;
  overflow: hidden;
  padding-left: 64px;
  font-size: 200px;
  font-style: normal;
  text-transform: lowercase;
  color: #fff;
}

p em:first-letter {
  float: left;
  margin: 130px 0 0 -55px;
  font-size: 80px;
  font-style: italic;
  line-height: 20px;
  color: #fff;
}

/* create the heart shape */
p:before,
p:after {
  content: "";
  position: absolute;
  z-index: 1;
  top: 225px;
  left: 120px;
  width: 75px;
  height: 50px;
  background: #000;
  transform: rotate(45deg);
  border-radius: 25px 0 0 30px;
}

p:after {
  left: 138px;
  transform: rotate(-45deg);
  border-radius: 0 25px 30px 0;
}

/* hide the tip of the "t" from "a lot" */
p strong:before {
  content: "";
  position: absolute;
  z-index: 11;
  top: 205px;
  left: 341px;
  width: 7px;
  height: 7px;
  background: #000;
  border-radius: 7px;
}

The final CSS typography experiment approximates the original image in all modern browsers that support the CSS3 properties of border-radius and transform.

Some browsers render type (especially after rotational transformations) better than others. Note that all the screenshots are taken from browsers running on Windows Vista OS.

Browser bugs and inconsistencies

I’ve put together a small test page to highlight some new CSS 2.1 and CSS3 bugs in modern browsers. It includes two new CSS 2.1 bugs in Internet Explorer 8.

Here are two ways to include HTML5 elements in your WordPress post content without WordPress’ wpautop function wrapping them in p tags or littering your code with line breaks.

HTML5 has several new elements that you may want to use in your post content to markup document sections, headers, footers, pullquotes, figures, or groups of headings. One way to safely include these elements in your posts is simple; the other way is a bit more complicated. Both ways rely on hand-coding the HTML5 markup in the WordPress editor’s HTML view.

If you are adding HTML5 elements to your post content then you should use an HTML5 doctype.

Disable wpautop for your theme

This is the simple way. Disable the wpautop function so that WordPress makes no attempt to correct your markup and leaves you to hand-code every line of your posts. If you want total control over every line of your HTML then this is the option for you.

To disable wpautop entirely add these lines to your theme’s functions.php:

remove_filter('the_excerpt', 'wpautop');
remove_filter('the_content', 'wpautop');

However, wpautop is generally quite useful if most of your posts are simple text content and you only occasionally want to include HTML5 elements. Therefore, modifying wpautop to recognise HTML5 elements might be more practical.

Modify wpautop to recognise HTML5 elements

WordPress’ wpautop is part of the core functions and can be found in this file within your WordPress installation: wp-includes/formatting.php. It controls how and where paragraphs and line breaks are inserted in excerpts and post content.

In order to create a modified version of WordPress’ core wpautop function I started off by duplicating it in my theme’s functions.php file.

What I’ve experimented with is disabling wpautop and adding a modified copy of it – which includes HTML5 elements in its arrayss – to my theme’s functions.php file.

Add the following to your theme’s functions.php file and you’ll be able to use section, article, aside, header, footer, hgroup, figure, details, figcaption, and summary in your post content. (Probably best to try this in a testing environment first!)

/* -----------------------------
MODIFIED WPAUTOP - Allow HTML5 block elements in wordpress posts
----------------------------- */

function html5autop($pee, $br = 1) {
   if ( trim($pee) === '' )
      return '';
   $pee = $pee . "
"; // just to make things a little easier, pad the end
   $pee = preg_replace('|<br />s*<br />|', "

", $pee);
   // Space things out a little
    // *insertion* of section|article|aside|header|footer|hgroup|figure|details|figcaption|summary
   $allblocks = '(?:table|thead|tfoot|caption|col|colgroup|tbody|tr|td|th|div|dl|dd|dt|ul|ol|li|pre|select|form|map|area|blockquote|address|math|style|input|p|h[1-6]|hr|fieldset|legend|section|article|aside|header|footer|hgroup|figure|details|figcaption|summary)';
   $pee = preg_replace('!(<' . $allblocks . '[^>]*>)!', "
$1", $pee);
   $pee = preg_replace('!(</' . $allblocks . '>)!', "$1

", $pee);
   $pee = str_replace(array("
", "
"), "
", $pee); // cross-platform newlines
   if ( strpos($pee, '<object') !== false ) {
      $pee = preg_replace('|s*<param([^>]*)>s*|', "<param$1>", $pee); // no pee inside object/embed
      $pee = preg_replace('|s*</embed>s*|', '</embed>', $pee);
   }
   $pee = preg_replace("/

+/", "

", $pee); // take care of duplicates
// make paragraphs, including one at the end
   $pees = preg_split('/
s*
/', $pee, -1, PREG_SPLIT_NO_EMPTY);
   $pee = '';
   foreach ( $pees as $tinkle )
      $pee .= '<p>' . trim($tinkle, "
") . "</p>
";
   $pee = preg_replace('|<p>s*</p>|', '', $pee); // under certain strange conditions it could create a P of entirely whitespace
// *insertion* of section|article|aside
   $pee = preg_replace('!<p>([^<]+)</(div|address|form|section|article|aside)>!', "<p>$1</p></$2>", $pee);
   $pee = preg_replace('!<p>s*(</?' . $allblocks . '[^>]*>)s*</p>!', "$1", $pee); // don't pee all over a tag
   $pee = preg_replace("|<p>(<li.+?)</p>|", "$1", $pee); // problem with nested lists
   $pee = preg_replace('|<p><blockquote([^>]*)>|i', "<blockquote$1><p>", $pee);
   $pee = str_replace('</blockquote></p>', '</p></blockquote>', $pee);
   $pee = preg_replace('!<p>s*(</?' . $allblocks . '[^>]*>)!', "$1", $pee);
   $pee = preg_replace('!(</?' . $allblocks . '[^>]*>)s*</p>!', "$1", $pee);
   if ($br) {
      $pee = preg_replace_callback('/<(script|style).*?</\1>/s', create_function('$matches', 'return str_replace("
", "<WPPreserveNewline />", $matches[0]);'), $pee);
      $pee = preg_replace('|(?<!<br />)s*
|', "<br />
", $pee); // optionally make line breaks
      $pee = str_replace('<WPPreserveNewline />', "
", $pee);
   }
   $pee = preg_replace('!(</?' . $allblocks . '[^>]*>)s*<br />!', "$1", $pee);
// *insertion* of img|figcaption|summary
   $pee = preg_replace('!<br />(s*</?(?:p|li|div|dl|dd|dt|th|pre|td|ul|ol|img|figcaption|summary)[^>]*>)!', '$1', $pee);
   if (strpos($pee, '<pre') !== false)
      $pee = preg_replace_callback('!(<pre[^>]*>)(.*?)</pre>!is', 'clean_pre', $pee );
   $pee = preg_replace( "|
</p>$|", '</p>', $pee );

   return $pee;
}

// remove the original wpautop function
remove_filter('the_excerpt', 'wpautop');
remove_filter('the_content', 'wpautop');

// add our new html5autop function
add_filter('the_excerpt', 'html5autop');
add_filter('the_content', 'html5autop');

The results are not absolutely perfect but then neither is the original wpautop function. Certain ways of formatting the code will result in unwanted trailing </p> tags or a missing opening <p> tags.

For example, to insert a figure with caption into a post you should avoid adding the figcaption on a new line because an image or link appearing before the figcaption will end up with a trailing </p>.

<!-- this turns out ok -->
<figure>
  <a href="#"><img src="image.jpg" alt="" /></a><figcaption>A figure caption for your reading pleasure</figcaption>
</figure>

<!-- this turns out not so ok -->
<figure>
  <a href="#"><img src="image.jpg" alt="" /></a>
  <figcaption>A figure caption for your reading pleasure</figcaption>
</figure>

Another example would be when beginning the contents of an aside with a paragraph. You’ll have to leave a blank line between the opening aside tag and the first paragraph.

<aside>

This content could be a pullquote or information that is tangentially related to the surrounding content. But to get it wrapped in a paragraph you have to leave those blank lines either side of it before the tags.

</aside>

Room for improvement

Obviously there are still a few issues with this because if you format your post content in certain ways then you can end up with invalid HTML, even if it doesn’t actually affect the rendering of the page. But it seems to be pretty close!

Leave a comment or email me if you are using this function and find there that are instances where it breaks down. I ran numerous tests and formatting variations to try and iron out as many problems as possible but it’s unlikely that I tried or spotted everything.

Hopefully someone with more PHP and WordPress experience will be able to improve upon what I’ve been experimenting with, or find a simpler and more elegant solution that retains the useful wpautop functionality while allowing for the use of HTML5 elements in posts. Please share anything you find!

Speech bubbles are a popular effect but many tutorials rely on presentational HTML or JavaScript. This tutorial contains various forms of speech bubble effect created with CSS 2.1 and enhanced with CSS3. No images, no JavaScript and it can be applied to your existing semantic HTML.

The CSS file used in the demo page is heavily commented so that you can see which lines of code are responsible for each part of the effects.

Demo: Pure CSS speech bubbles

Support: Firefox 3.5+, Safari 4+, Chrome 4+, Opera 10+, IE8+.

Progressive enhancement with pseudo-elements

With HTML as simple as <div>Content</div> or <p>Content</p> you can produce speech bubble effects like this:

Add a child element, for example, <blockquote><p>Quote</p></blockquote> and you can even produce speech bubble effects like this:

I’d encourage you to adapt the examples to your needs and use any other associated elements available to you in your existing HTML document. The key is to use the :before and/or :after pseudo-elements to produce basic shapes.

By applying CSS3 properties such as border-radius and transform you can produce more complex shapes and orientations. This is how the heart-shape in my CSS typography experiment was created.

Example code

This is an example of how to create a basic speech bubble with a few enhancements. For further examples see the demo page and the heavily commented CSS file that it uses.

/* Bubble with an isoceles triangle
------------------------------------------ */

.triangle-isosceles {
  position: relative;
  padding: 15px;
  margin: 1em 0 3em;
  color: #000;
  background: #f3961c;
  border-radius: 10px;
  background: linear-gradient(top, #f9d835, #f3961c);
}

/* creates triangle */
.triangle-isosceles:after {
  content: "";
  display: block; /* reduce the damage in FF3.0 */
  position: absolute;
  bottom: -15px;
  left: 50px;
  width: 0;
  border-width: 15px 15px 0;
  border-style: solid;
  border-color: #f3961c transparent;
}

A note on progressive enhancement

This approach is one of progressive enhancement. Styles are built up in layers from simple coloured boxes, to boxes with a “speech tick” of some kind, to rounded rectangles or circles with gradient backgrounds. Browsers render the styles that they are capable of rendering.

Browsers (such as IE6 and IE7) that do not adequately support CSS 2.1 or those (such as IE8) without support for the necessary CSS3 properties will not look broken; they will simply not get the full speech bubble effect. However…

A warning about Firefox 3.0

Firefox 3.0 supports the necessary CSS 2.1 pseudo-elements but does not support the positioning of generated content.

Some of the examples are close to what I consider to be unacceptably broken in Firefox 3.0. It is the only browser above 2% market share — currently at ~4% as of March 2010 according to NetApplications — that cannot handle even the basic speech bubble effects.

Before applying this technique, consider the importance of Firefox 3.0 support and the percentage of your visitors currently using this browser. Eventually it will become a rare browser but due to it’s partial CSS 2.1 support you should be aware that there is no graceful fallback for Firefox 3.0 when using this technique.

This is an experiment that creates social media icons using CSS and semantic HTML. It uses progressive enhancement to turn an unordered list of text links into a set of icons without the use of images or JavaScript.

Demo: Pure CSS social media icons

Support: Firefox 3.5+, Safari 4+, Chrome 4+, Opera 10+, IE8+.

CSS social media icons

The image below shows you the final appearance in modern browsers.

This experiment starts with a simple list of links, with each link using meaningful text, and then progressively styles each link to take on the appearance of the relevant social media icon. As a result, there should be support for screenreaders or users with CSS disabled.

I’ve also included basic text in the title attribute of each link to provide information for users who may not be familiar with what service a specific icon represents.

This is an experiment that uses CSS 2.1 and CSS3 that is not supported by Internet Explorer 6 and 7, therefore, you shouldn’t expect it to work in those browsers. CSS is not necessarily the most appropriate tool for this kind of thing either.

Example code

The technique I’ve used is much the same as the one used for the Pure CSS speech bubbles.

The HTML is just a basic unordered list of links to various social networking websites or services.

<ul>
   <li class="facebook"><a href="#non" title="Share on Facebook">Facebook</a></li>
   <li class="twitter"><a href="#non" title="Share on Twitter">Twitter</a></li>
   <li class="rss"><a href="#non" title="Subscribe to the RSS feed">RSS</a></li>
   <li class="flickr"><a href="#non" title="Share on Flickr">Flickr</a></li>
   <li class="delicious"><a href="#non" title="Bookmark on Delicious">Delicious</a></li>
   <li class="linkedin"><a href="#non" title="Share on LinkedIn">LinkedIn</a></li>
   <li class="google"><a href="#non" title="Bookmark with Google">Google</a></li>
   <li class="orkut"><a href="#non" title="Share on Orkut">Orkut</a></li>
   <li class="technorati"><a href="#non" title="Add to Technorati">Technorati</a></li>
   <li class="netvibes"><a href="#non" title="Add to NetVibes">NetVibes</a></li>
</ul>

I’ve applied some general styles to the elements that make up this list.

ul {
   list-style:none;
   padding:0;
   margin:0;
   overflow:hidden;
   font:0.875em/1 Arial, sans-serif;
}

ul li {
   float:left;
   width:66px;
   height:66px;
   margin:20px 20px 0 0;
}

ul li a {
   display:block;
   width:64px;
   height:64px;
   overflow:hidden;
   border:1px solid transparent;
   line-height:64px;
   text-decoration:none;
   /* css3 */
   text-shadow:0 -1px 0 rgba(0,0,0,0.5);
   -moz-border-radius:5px;
   -webkit-border-radius:5px;
   border-radius:5px; /* standards version last */
}

ul li a:hover,
ul li a:focus,
ul li a:active {
   opacity:0.8;
   border-color:#000;
}

Each icon uses it’s own set of styles. This is the CSS that created the RSS icon.

.rss a {
   position:relative;
   width:60px;
   padding:0 2px;
   border-color:#ea6635;
   text-transform:lowercase;
   text-indent:-186px;
   font-size:64px;
   font-weight:bold;
   color:#fff;
   background:#e36443;

   /* css3 */
   -moz-box-shadow:0 0 4px rgba(0,0,0,0.4);
   -webkit-box-shadow:0 0 4px rgba(0,0,0,0.4);
   box-shadow:0 0 4px rgba(0,0,0,0.4);
   background:-webkit-gradient(linear, left top, left bottom, from(#f19242), to(#e36443));
   background:-moz-linear-gradient(top, #f19242, #e36443);
   background:linear-gradient(top, #f19242, #e36443);
}

.rss a:before,
.rss a:after {
   content:"";
   position:absolute;
   bottom:10px;
   left:10px;
}

/* create circle */
.rss a:before {
   width:12px;
   height:12px;
   background:#fff;
   /* css3 */
   -moz-border-radius:12px;
   -webkit-border-radius:12px;
   border-radius:12px;
}

/* create the two arcs */
.rss a:after {
   width:22px;
   height:22px;
   border-style:double;
   border-width:24px 24px 0 0;
   border-color:#fff;
   /* css3 */
   -moz-border-radius:0 50px 0 0;
   -webkit-border-radius:0 50px 0 0;
   border-radius:0 50px 0 0;
}

Acknowledgements

This post was inspired by an experiment on insicdesigns that producing a few social media icons using CSS.

This toad jumped out of the long grass near a pond and kindly let me take a few photographs of it.

This is a remix of another author’s idea of using CSS to make a classic model of our solar system. Here, I’ve relied on CSS pseudo-elements and generated content to render scale models of the solar system from simple markup of the raw information.

There are three demos for this experiment, which is based on Alex Giron’s original Our Solar System in CSS3.

• Basic demo: Reworking of original experiment
• Advanced demo: Scale model of the Solar System
• Advanced demo (keyboard support): Scale model of the Solar System

The basic demo uses only CSS and simple, semantic HTML to relatively faithfully reproduce Alex’s original result.

The advanced demo is a rough scale model of the Solar System. It uses the same HTML as the “basic demo” but makes extensive use of CSS pseudo-elements, generated content, and various bits of CSS3.

The advanced demo (keyboard support) is an attempt to provide keyboard support by introducing slight modifications to the HTML. I’ve commented out the animations in this version of the demo.

Why rework the original experiment?

I was curious to see if the same result could be achieved with simpler HTML, by relying on some newer CSS features.

I experimented a bit further with generated content, shadows, and the way the layout of the solar system is implemented. Doing this exposed me to some of the different ways modern browsers are implementing CSS3. I’ve described some of those differences and bugs below.

A scale model of the solar system

The main demo is a scale model of the solar system. It uses 3 different scales: one for the object diameters; one for the distance of the planets from the sun; and one for the orbital period of each planet.

Semantic HTML and Microdata

The HTML is a list where each list item contains a title and description. I’ve included some HTML Microdata to provide hooks for generated content.

<li id="earth" itemscope>
  <h2 itemprop="object">Earth
  <dl>
    <dt>Description</dt>
    <dd itemprop="description">Earth is an ocean planet. Our home world's abundance of water - and life - makes it unique in our solar system. Other planets, plus a few moons, have ice, atmospheres, seasons and even weather, but only on Earth does the whole complicated mix come together in a way that encourages life - and lots of it.</dd>
    <dt>Diameter</dt>
    <dd itemprop="diameter">12,755 <abbr title="kilometers">km</abbr></dd>
    <dt>Distance from sun</dt>
    <dd itemprop="distance">150×10<sup>6</sup> <abbr title="kilometers">km</abbr></dd>
    <dt>Orbital period</dt>
    <dd itemprop="orbit">365<abbr title="days">d</abbr></dd>
  </dl>
</li>

CSS pseudo-elements and generated content

Pseudo-elements are used to produce the planets, Saturn’s ring, the planet names, and to add the scale information.

Given that the scales only make sense when CSS is loaded it isn’t appropriate to have the scales described in the HTML. Both demos use the same HTML but only one of them is a rough scale model. Therefore, in the scale model demo I’ve used generated content to present the ratios and append extra information to the headings.

header h1:after {content:": A scale model";}
header h2:after {content:"Planet diameters 1px : 1,220 km / Distance from sun 1px : 7,125,000 km / Orbital period 1s : 4d";}

#earth dd[itemprop=diameter]:after {content:" (5px) / ";}
#earth dd[itemprop=distance]:after {content:" (22px) / ";}
#earth dd[itemprop=orbit]:after {content:" (91s)";}

Even more complex 3D presentations are likely to be possible using webkit-perspective and other 3D transforms.

Keyboard support

With a little modification it is possible to provide some form of keyboard support so that the additional information and highlighting can be viewed without using a mouse. Doing so requires adding block-level anchors (allowed in HTML5) and modifying some of the CSS selectors.

Modern browser CSS3 inconsistencies

This experiment only works adequately in modern browsers such as Safari 4+, Chrome 4+, Firefox 3.6+ and Opera 10.5+.

Even among the current crop of modern browsers, there are bugs and varying levels of support for different CSS properties and values. In particular, webkit’s box-shadow implementation has issues.

There are a few other unusual :hover bugs in Opera 10.5 (most obvious in the basic demo). It should also be noted that the :hover area remains square in all modern browsers even when you apply a border-radius to the element.

Border radius

There are also a few other peculiarities around percentage units for border radius. Of the modern browsers, a square object with a border-radius of 50% will only produce a circle in Safari 5, Chrome 5, and Firefox 3.6.

Safari 4 doesn’t appear to support percentage units for border radius at all (which is why the CSS in the demos explicitly sets a -webkit-border-radius value for each object). Safari 5 and Chrome 5 do support percentage units for this property. However, Chrome 5 has difficulty rendering a 1px wide border on a large circle. Most of the border simply isn’t rendered.

In Opera 10.5, if you set border-radius to 50% you don’t always get a circle, so I have had to redeclare the border-radius for each object in pixel units.

It appears that this is one aspect of Opera’s non-prefixed border-radius implementation that is incorrect and in need of fixing.

Box shadow

Safari 4’s inferior box-shadow implementation means that inset shadows are not rendered on the planet bodies. In addition, the second box-shadow applied to Saturn (used to separate the planet from its ring) is completely missing in Safari 4 as it does not support a spread radius value.

Safari 5 and Chrome 5 are better but still problematic. The second box-shadow is not perfectly round as the box-shadow seems to use the pseudo-element’s computed border-radius. Furthermore, Chrome 5 on Windows does not properly support inset box-shadow meaning that the shadow ignores the border-radius declaration and appears as a protruding square.

The use of box-shadow to separate Saturn from the ring isn’t strictly necessary. You can create the separated ring using a border but box-shadow cannot be applied in a way that casts it over a border. Another alternative would be to add a black border around the planet to give the illusion of space between itself and the ring, but all browsers display a few pixels of unwanted background colour all along the outer edge of the rounded border.

I wanted the ring to share the appearance of a shadow being cast on it. Opera 10.5 and Firefox 3.6 get it right. Both webkit browsers get it wrong.

Using CSS 2.1 pseudo-elements to provide up to 3 background canvases, 2 fixed-size presentational images, and multiple complex borders for a single HTML element. This method of progressive enhancement works for all browsers that support CSS 2.1 pseudo-elements and their positioning. No CSS3 support required.

• Demo: Multiple Backgrounds with CSS 2.1
• Demo: Multiple Borders with CSS 2.1

Support: Firefox 3.5+, Safari 4+, Chrome 4+, Opera 10+, IE8+.

How does it work?

Essentially, you create pseudo-elements using CSS (:before and :after) and treat them similarly to how you would treat HTML elements nested within your target element. But they have distinct benefits – beyond semantics – over the use of nested HTML elements.

To provide multiple backgrounds and/or borders, the pseudo-elements are pushed behind the content layer and pinned to the desired points of the HTML element using absolute positioning.

The pseudo-elements contain no true content and are absolutely positioned. This means that they can be stretched to sit over any area of the “parent” element without affecting its content. This can be done using any combination of values for the top, right, bottom, left, width, and height properties and is the key to their flexibility.

What effects can be achieved?

Using just one element you can create parallax effects, multiple background colours, multiple background images, clipped background images, image replacement, expandable boxes using images for borders, fluid faux columns, images existing outside the box, the appearance of multiple borders, and other popular effects that usually require images and/or the use of presentational HTML. It is also possible to include 2 extra presentational images as generated content.

The Multiple Backgrounds with CSS 2.1 and Multiple Borders with CSS 2.1 demo pages show how several popular examples of these effects can be achieved with this technique.

Most structural elements will contain child elements. Therefore, more often than not, you will be able to gain a further 2 pseudo-elements to use in the presentation by generating them from the first child (and even last-child) element of the parent element. In addition, you can use style changes on :hover to produce complex interaction effects.

Example code: multiple background images

Using this technique it is possible to reproduce multiple-background parallax effects like those found on the Silverback site using just one HTML element.

The element gets its own background image and any desired padding. By relatively positioning the element it acts as the reference point when absolutely positioning the pseudo-elements. The positive z-index will allow for the correct z-axis positioning of the pseudo-elements.

#silverback {
  position: relative;
  z-index: 1;
  min-width: 200px;
  min-height: 200px;
  padding: 120px 200px 50px;
  background: #d3ff99 url(vines-back.png) -10% 0 repeat-x;
}

Both pseudo-elements are absolutely positioned and pinned to each side of the element. The z-index value of -1 moves the pseudo-elements behind the content layer. This way the pseudo-elements sit on top of the element’s background and border but all the content is still selectable or clickable.

#silverback:before,
#silverback:after {
  position: absolute;
  z-index: -1;
  top: 0;
  left: 0;
  right: 0;
  bottom: 0;
  padding-top: 100px;
}

Each pseudo-element then has a repeated background-image set. This is all that is needed to reproduce the parallax effect.

The content property lets you add an image as generated content. With two pseudo-elements you can add 2 further images to an element. They can be crudely positioned within the pseudo-element box by varying other properties such as text-align and padding.

#silverback:before {
  content: url(gorilla-1.png);
  padding-left: 3%;
  text-align: left;
  background: transparent url(vines-mid.png) 300% 0 repeat-x;
}

#silverback:after {
  content: url(gorilla-2.png);
  padding-right: 3%;
  text-align: right;
  background: transparent url(vines-front.png) 70% 0 repeat-x;
}

The finished product is part of the Multiple Backgrounds with CSS 2.1 demo.

Example code: fluid faux columns

Another application is creating equal height fluid columns without images or extra nested containers.

The HTML base is very simple. I’ve used specific classes on each child div rather than relying on CSS 2.1 selectors that IE6 does not support. If you don’t require IE6 support you don’t actually need the classes.

<div id="faux">
  <div class="main">[content]</div>
  <div class="supp1">[content]</div>
  <div class="supp2">[content]</div>
</div>

The percentage-width container is once again relatively positioned and a positive z-index is set. Applying overflow:hidden gets the element to wrap its floated children and will hide the overflowing pseudo-elements. The background colour will provide the colour for one of the columns.

#faux {
  position: relative;
  z-index: 1;
  width: 80%;
  margin: 0 auto;
  overflow: hidden;
  background: #ffaf00;
}

By using relative positioning on the child div‘s you can also control the order of the columns independently of their source order.

#faux div {
  position: relative;
  float: left;
  width: 30%;
}

#faux .main { left: 35%; }
#faux .supp1 { left: -28.5%; }
#faux .supp2 { left: 8.5%; }

The other two full-height columns are produced by creating, sizing, and positioning pseudo-elements with backgrounds. These backgrounds can be (repeating) images if the design requires.

#faux:before,
#faux:after {
   content: "";
   position: absolute;
   z-index: -1;
   top: 0;
   right: 0;
   bottom: 0;
   left: 33.333%;
   background: #f9b6ff;
}

#faux:after {
   left: 66.667%;
   background: #79daff;
}

The finished product is part of the Multiple Backgrounds with CSS 2.1 demo.

Example code: multiple borders

Multiple borders are produced in much the same way. Using them can avoid the need for images to produce simple effects.

An element must be relatively positioned and have sufficient padding to contain the width of the extra border you will be creating with pseudo-elements.

#borders {
   position: relative;
   z-index: 1;
   padding: 30px;
   border: 5px solid #f00;
   background: #ff9600;
}

The pseudo-elements are positioned at specific distances away from the edge of the element’s box, moved behind the content layer with the negative z-index, and given the border and background values you want.

#borders:before {
   content: "";
   position: absolute;
   z-index: -1;
   top: 5px;
   left: 5px;
   right: 5px;
   bottom: 5px;
   border: 5px solid #ffea00;
   background: #4aa929;
}

#borders:after {
   content: "";
   position: absolute;
   z-index: -1;
   top: 15px;
   left: 15px;
   right: 15px;
   bottom: 15px;
   border: 5px solid #00b4ff;
   background: #fff;
}

That’s all there is to it. The finished product is part of the Multiple Borders with CSS 2.1 demo.

Progressive enhancement and legacy browsers

IE6 and IE7 have no support for CSS 2.1 pseudo-elements and will ignore all :before and :after declarations. They get none of the enhancements but are left with the basic usable experience.

A warning about Firefox 3.0

Firefox 3.0 supports CSS 2.1 pseudo-elements but does not support their positioning. Due to this partial support, you should avoid declaring display:block for absolutely positioned pseudo-elements that explicitly declare a width or height values. However, when using borders there is no graceful fallback for Firefox 3.0. Although, sometimes an improved appearance in Firefox 3.0 can be achieved by adding display:block to pseudo-element hacks that use borders.

Enhancing with CSS3

All the applications included in this article could be further enhanced to take advantage of present-day CSS3 implementations.

Using border-radius, rgba, and transforms, and CSS3 multiple background images in tandem with pseudo-elements can produce even more complex presentations that I hope to include in a future article. Currently there is no browser support for the use of CSS3 transitions or animations on pseudo-elements.

In the future: CSS3 pseudo-elements

The proposed extensions to pseudo-elements in the CSS3 Generated and Replaced Content Module include the addition of nested pseudo-elements (::before::before), multiple pseudo-elements (::after(2)), wrapping pseudo-elements (::outside), and the ability to insert pseudo-elements into later parts of the document (::alternate).

These changes would provide a near limitless number, and arrangement, of pseudo-elements for all sorts of complex effects and presentations using just one element.

Let me know what you’ve done

I’ve focused on just a few applications and popular effects. If you find other applications, limitations, or want to share how you’ve applied this technique please leave a comment below or let me know on Twitter (@necolas.

Translations

• 使用css2.1实现多重背景、多重边框效果

An accessible image replacement method using pseudo-elements and generated-content. This method works with images and/or CSS off, with semi-transparent images, doesn’t hide text from screen-readers or search engines, and provides fallback for IE 6 and IE 7.

Known support: Firefox 1.5+, Safari 3+, Chrome 3+, Opera 9+, IE 8+

What’s wrong with current methods?

The two most widely used image replacement techniques are the Gilder/Levin Method and the Phark Method. Both have different flaws.

The Gilder/Levin Method requires the addition of presentational HTML (an empty span) and doesn’t work with transparent images as the default text shows through. The Phark Method uses a negative text-indent to hide the text and so it is not visible when CSS is on and images are off.

Resurrecting the NIR method

Using pseudo-elements and generated-content as an image replacement technique isn’t a new idea. It was proposed and demonstrated by Paul Nash back in 2006. This is the Nash Image Replacement method.

<h1 class="nir">[content]</h1>

.nir {
   height: 100px; /* height of replacement image */
   padding: 0;
   margin: 0;
   overflow: hidden;
}

.nir:before {
   content: url(image.gif);
   display: block;
}

The height value is equal to that of the replacement image. Setting overflow:hidden ensures that the original content is not visible on screen when the image is loaded. The replacement image is inserted as generated content in the :before pseudo-element which is set to behave like a block element in order to push the element’s original content down.

What about IE 6 and IE 7?

Neither browser supports :before; if you need to support them you’ll have to rely on the Phark method. This can be done using conditional comments or safe IE6/7 hacks to serve alternative styles to legacy versions of IE .

<!--[if lte IE 7]>
<style>
.nir {
   height: 100px;
   padding: 0;
   margin: 0;
   overflow: hidden;
   text-indent: -9000px;
   background: url(image.gif) no-repeat 0 0;
}
</style>
<![endif]-->

Using the NIR method allows you to keep your HTML semantic and deliver improved accessibility to users of modern browsers. The Phark Method can then be served to IE 6 and IE 7.

Improving the NIR method

The first problem with NIR is that if images are disabled all browsers leave whitespace above the element’s content. Opera 10.5 even displays the text string “image”! If the height of the element is small enough this whitespace causes the element’s content to overflow and be partially or completely hidden when images are disabled.

Another consideration is what happens if an image doesn’t exist or fails to load. Safari and Chrome will display a “missing image” icon that cannot be removed. Once again, this can cause the element’s content to overflow and become partially or completely hidden to users.

A more robust version of the NIR method is the following modification:

.nir {
   height: 100px; /* height of replacement image */
   width: 400px; /* width of replacement image */
   padding: 0;
   margin: 0;
   overflow: hidden;
}

.nir:before {
   content: url(image.gif);
   display: inline-block;
   font-size: 0;
   line-height: 0;
}

Setting font-size and line-height to 0 avoids the whitespace problems in all browsers. Setting the element’s width equal to that of the replacement image and getting the pseudo-element to act as an inline-block helps minimise the problems in webkit browsers should an image fail to load.

Ideally browsers would avoid displaying anything in a pseudo-element when its generated-content image fails to load. If that were the case, the original NIR method would be all that is needed.

What about using sprites?

One of the most common uses of image replacement is for navigation. This often involves using a large sprite with :hover and :active states as a background image. It turns out that using sprites is not a problem for modern browsers. When using the modified-NIR method the sprite is included as a generated-content image that is positioned using negative margins.

This is an example that rebuilds the right-hand category navigation from Web Designer Wall using a sprite and the modified-NIR method.

<ul id="nav">
  <li id="nav-item-1"><a href="#non">Tutorials</a></li>
  <li id="nav-item-2"><a href="#non">Trends</a></li>
  <li id="nav-item-3"><a href="#non">General</a></li>
</ul>

/* modified-NIR */

#nav a {
  display: block;
  width: 225px;
  height: 46px;
  overflow: hidden;
}

#nav a:before {
   content:url(sprite.png);
   display:-moz-inline-box; /* for Firefox 1.5 & 2 */
   display:inline-block;
   font-size:0;
   line-height:0;
}

/* repositioning the sprite */

#nav-item-1 a:hover:before,
#nav-item-1 a:focus:before,
#nav-item-1 a:active:before {margin:-46px 0 0;}

#nav-item-2 a:before        {margin:-92px 0 0;}
#nav-item-2 a:hover:before,
#nav-item-2 a:focus:before,
#nav-item-2 a:active:before {margin:-138px 0 0;}

#nav-item-3 a:before        {margin:-184px 0 0;}
#nav-item-3 a:hover:before,
#nav-item-3 a:focus:before,
#nav-item-3 a:active:before {margin:-230px 0 0;}

/* :hover hack for IE8 if no a:hover styles declared */
#nav a:hover {cursor:pointer;}

For some reason IE8 refuses to reposition the image when the mouse is over the link unless a style is declared for a:hover. In most cases you will have declared a:hover styles for the basic links on your webpage, and this is enough. But it is worth being aware of this IE8 behaviour.

The addition of display:-moz-inline-box; is required to reposition the sprite in versions of Firefox prior to Firefox 3.0. They are very rare browsers but I’ve included it in case that level of legacy support is needed.

If you want image replacement in IE 6 and IE 7 the following additional styles can be served to those browsers using conditional comments.

/* Phark IR method */

#nav a {
   text-indent: -9000px;
   background: url(sprite.png) no-repeat;
}

/* repositioning the sprite */

#nav-item-1 a:hover,
#nav-item-1 a:active { background-position: 0 -46px; }

#nav-item-2 a        { background-position: 0 -92px; }
#nav-item-2 a:hover,
#nav-item-2 a:hover  { background-position: 0 -138px; }

#nav-item-3 a        { background-position: 0 -184px; }
#nav-item-3 a:hover,
#nav-item-3 a:active { background-position: 0 -230px; }

/* hack for IE6 */
#nav a:hover { margin: 0; }

The changes are fairly simple. But IE 6 applies the margins declared for a:hover:before to a:hover and so they need to be reset in the styles served to IE 6.

See the modified-NIR (using sprites) demo.

The following is an interesting extract from Straw Dogs by John Gray (pp. 109–116) discussing some of the differences between Western and Taoist philosophical traditions.

The fetish of choice

For us, nothing is more important than to live as we choose. This is not because we value freedom more than people did in earlier times. It is because we have identified the good life with the chosen life.

For the pre-Socratic Greeks, the fact that our lives are framed by limits was what makes us human. Being born a mortal, in a given place and time, strong or weak, swift or slow, brave or cowardly, beautiful or ugly, suffering tragedy or being spared it – these features of our lives are given to us, they cannot be chosen. If the Greeks could have imagined a life without them, they could not have recognised it as that of a human being.

The ancient Greeks were right. The ideal of the chosen life does not square with how we live. We are not authors of our lives; we are not even part-authors of the events that mark us most deeply. Nearly everything that is most important in our lives is unchosen. The time and place we are born, our parents, the first language we speak – these are chance, not choice. It is the casual drift of things that shapes our most fateful relationships. The life of each of us is a chapter of accidents.

Personal autonomy is the work of our imagination, not the way we live. Yet we have been thrown into a time in which everything is provisional. New technologies alter our lives daily. The traditions of the past cannot be retrieved. At the same time we have little idea of what the future will bring. We are forced to live as if we were free.

The cult of choice reflects the fact that we must improvise our lives. That we cannot do otherwise is a mark of our unfreedom. Choice has become a fetish; but the mark of a fetish is that it is unchosen.

Animal virtues

The dominant Western view…teaches that humans are unlike other animals, which simply respond to the situations in which they find themselves. We can scrutinise our motives and impulses; we can know why we act as we do. By becoming ever more self-aware, we can approach a point at which our actions are the results of our choices. When we are fully conscious, everything we do will be done for reasons we can know. At that point, we will be authors of our lives.

This may seem fantastical, and so it is. Yet it is what we are taught by Socrates, Aristotle and Plato, Descartes, Spinoza and Marx. For all of them, consciousness is our very essence, and the good life means living as a fully conscious individual.

…

Western thought is fixated on the gap between what is and what ought to be. But in everyday life we do not scan our options beforehand, then enact the one that is best. We simply deal with whatever is at hand. …Different people follow different customs; but in acting without intention, we are not simply following habit. Intentionless acts occur in all sorts of situations, including those we have never come across before.

Outside the Western tradition, the Taoists of ancient China saw no gap between is and ought. Right action was whatever comes from a clear view of the situation. They did not follow moralists – in their day, Confucians – in wanting to fetter human beings with rules or principles. For Taoists, the good life is only the natural life lived skillfully. It has no particular purpose. It has nothing to do with the will, and it does not consist in trying to realise any ideal. Everything we do can be done more or less well; but if we act well it is not because we translate our intentions into deeds. It is because we deal skillfully with whatever needs to be done. The good life means living according to our natures and circumstances. There is nothing that says that it is bound to be the same for everybody, or that it must conform with ‘morality’.

In Taoist thought, the good life comes spontaneously; but spontaneity is far from simply acting on the impulses that occur to us. In Western traditions such as Romanticism, spontaneity is linked with subjectively. In Taoism it means acting dispassionately, on the basis of an objective view of the situation at hand. The common man cannot see things objectively, because his mind is clouded by anxiety about achieving his goals. Seeing clearly means not projecting our goals into the world; acting spontaneously means acting according to the needs of the situation. Western moralists will ask what is the purpose of such action, but for Taoists the good life has no purpose. It is like swimming in a whirlpool, responding to the currents as they come and go. ‘I enter with the inflow, and emerge with the outflow, follow the Way of the water, and do not impose my selfishness upon it. This is how I stay afloat in it,’ says the Chuang-Tzu.

In this view, ethics is simply a practical skill, like fishing or swimming. The core of ethics is not choice or conscious awareness, but the knack of knowing what to do. It is a skill that comes with practice and an empty mind. A.C. Graham explains:

The Taoist relaxes the body, calms the mind, loosens the grip of categories made habitual by naming, frees the current of thought for more fluid differentiations and assimilations, and instead of pondering choices lets the problems solve themselves as inclination spontaneously finds its own direction. …He does not have to make decisions based on standards of good and bad because, granted only that enlightenment is better than ignorance, it is self-evident that among spontaneous inclinations the one prevailing in the greatest clarity of mind, other things being equal, will be best, the one in accord with the Way.

Few humans beings have the knack of living well. Observing this, the Taoists looked to other animals as their guides to the good life. Animals in the wild know how to live, they do not need to think or choose. It is only when they are fettered by humans that they cease to live naturally.

As the Chuang-Tzu puts it, horses, when they live wild, eat grass and drink water; when they are content, they entwine their necks and rub each other. When angry, they turn their backs on each other and kick out. This is what horses know. But if harnessed together and lined up under constraints, they know how to look sideways and to arch their necks, to career around and try to spit out the bit and rid themselves of the reins.

For people in thrall to ‘morality’ , the good life means perpetual striving. For Taoists it means living effortlessly, according to our natures. The freest human being is not the one who acts on reasons he has chosen for himself, but one who never has to choose. Rather than agonising over alternatives, he responds effortlessly to situations as they arise. He lives not as he chooses but as he must. Such a human has the perfect freedom of a wild animal – or a machine. As the Lieh-Tzu says: ‘The highest man at rest is as though dead, in movement is like a machine. He knows neither why he is at rest nor why he is not, why he is in movement nor why he is not.’

The idea that freedom means becoming like a wild animal or machine is offensive to Western religious and humanist prejudices, but it is consistent with the most advanced scientific knowledge. A.C. Graham explains:

Taoism coincides with the scientific worldview at just those points where the latter most disturbs westerners rooted in the Christian tradition – the littleness of man in a vast universe; the inhuman Tao which all things follow, without purpose and indifferent to human needs; the transience of life, the impossibility of knowing what comes after death; unending change in which the possibility of progress is not even conceived; the relativity of values; a fatalism very close to determinism; even a suggestion that the human organism operates like a machine.

Autonomy means acting on reasons I have chosen; but the lesson of cognitive science is that there is no self to do the choosing. We are far more like machines and wild animals than we imagine. But we cannot attain the amoral selflessness of wild animals, or the choiceless automatism of machines. Perhaps we can learn to live more lightly, less burdened by morality. We cannot return to a purely spontaneous existence.

How to create a custom Tweet Button for WordPress using the bit.ly and Twitter APIs. The HTML and CSS is completely customisable and there is no need for JavaScript. PHP is used to automatically shorten and cache the URL of a post, fetch and cache the number of retweets, and populate the query string parameters in the link to Twitter.

The custom Tweet Button at the bottom of this post was created using this method. All the files are available on Github and released under MIT license. The PHP code was heavily influenced by the BackType Tweetcount plugin.

How to use

You’ll need your own bit.ly account and to be comfortable editing your theme’s functions.php, style.css, and template files. Be sure to make backups before you start making changes.

Step 1: Download the Custom Tweet Button for WordPress files from Github.

Step 2: Include the custom-tweet-button.php file in your theme’s functions.php file.

Step 3: Replace the bit.ly username, bit.ly API key, and Twitter username placeholders in the tweet_button function with your own. Your bit.ly credentials can be found on the “settings” page of your account.

Step 4: Add the custom Tweet Button CSS to your theme’s style.css file. Add the tweet.png image in your theme’s image folder. Make sure the image is correctly referenced in the CSS file.

Step 5: Call the function tweet_button in your template files (e.g. single.php) at the position(s) in the HTML you’d like the Tweet Button to appear:

if (function_exists('tweet_button')) {
   tweet_button(get_permalink());
}

Why make your own Tweet Button?

Making your own custom Tweet Button for WordPress has several additional advantages over using Twitter’s own offerings.

• Full control over the HTML and CSS.
  Having full control over the HTML and CSS means that you can choose how to present your Tweet Button. I decided to reproduce the horizontal and vertical styles of Twitter’s own button. But any appearance is possible.

• All click, traffic, and referrer data is stored in your bit.ly account.
  The URL for any published post is automatically shortened using the bit.ly service. The short URL is then passed to Twitter to ensure you can monitor the click and traffic data in your bit.ly account. The permalink is passed to Twitter in the counturl query string parameter to ensure that it counts the URL that your short URL resolves to.

• No need for JavaScript or embedded iframes.
  The Tweet Button works without JavaScript. You have full control over any custom JavaScript enhancements you may wish to include. If you’d prefer Twitter’s share page to open in a pop-up window you can write your own JavaScript handler.

• Faster page load.
  No external JavaScript or image files are loaded; both the short URL and retweet counts are cached.

• Use the short URL and retweet count for other purposes.
  The short URLs and retweet counts are stored as post meta-data. This makes it easy to display this data anywhere else in a post. The retweet count data could be used for conditional template logic. For example, you could order posts based on the number of retweets, apply custom styles to your most retweeted posts, or display your most tweeted posts in a widget.

• Easy to add Google Analytics campaign and event tracking.
  The Tweet Button is simple HTML and you have control over all the information that is sent to Twitter. Therefore, it is possible to use Google Analytics to help answer questions like: are people sharing your posts from the homepage or the post itself? If the Tweet Button is displayed above and below your posts, which gets the most clicks? How long do people take to click the Tweet Button? How many people are visiting my site thanks to links posted on Twitter using the Tweet Button?

• Approximate the number of retweets for old posts.
  Before the release of the official Tweet Button, Twitter did not collect data on the number of times a URL was tweeted. This means your older posts may display far fewer retweets than actually occurred. However, there is a workaround. Use a service like Topsy, Backtype, or Tweetmeme to get the number of times your old post was retweeted. The difference between this and the number from Twitter’s APIs is the approximate number of retweets Twitter missed. To correct the retweet count for old posts add the number of missed retweets to a Custom Field called retweet_count_start.

How the custom Tweet Button works

Once a post is published its permalink URL is shortened using the bit.ly API.

The returned URL is permanently cached in the bitly_short_url Custom Field. The short URL is now part of the post’s general meta-data and can be used in contexts other than the Tweet Button.

The Twitter API is used to get the number of retweets for the post’s permalink URL. This number, along with the time at which it was requested, is cached in the retweet_cache Custom Field. When the cache interval has passed, an API call is made and the returned number of retweets is checked against the value stored in retweet_cache. If the returned number is greater, the value of retweet_cache is updated.

The content of the tweet is automatically created by setting several properties for the http://twitter.com/share URL. The post title makes up the message; the short URL is passed to Twitter as the URL to be displayed in the tweet; the permalink URL is passed to Twitter as the URL to be counted; and your username is declared.

$twitter_params =
'?text=' . urlencode($title) .
'&url=' . urlencode($short_url) .
'&counturl=' .urlencode($url).
'&via=' . $twitter_via;

The default HTML output is very simple and can be fully customised. To display the count number vertically, add the class vcount.

<div class="twitter-share vcount>
   <a class="twitter-button"
      rel="external nofollow"
      title="Share this on Twitter"
      href="http://twitter.com/share?query-string-params"
      target="_blank">Tweet</a>
   <a class="twitter-count" href="http://twitter.com/search?q=url>259</a>
</div>

Further enhancements

Please apply any improvements or enhancements for the script against the source repository.

If you’re using HTML5 elements then you’re probably also using a JavaScript shiv to help make it possible to style those elements in versions of Internet Explorer prior to IE9. But when JavaScript is disabled the accessibility of the content may be affected in these versions of IE. This is one way to provide a more accessible fallback.

The concept is to ensure that all modern browsers are served the default style sheet(s) and that people using older versions of IE only download them if JavaScript is enabled. When JavaScript is not enabled, people using those browsers can be served either no styles at all (as Yahoo! suggests for browsers receiving C-Grade support) or simple fallback styles.

Client-side method: conditional comments

Doing this on the client-side comes at the cost of having to litter your code with proprietary conditional comments. First, it’s necessary to comment out the default style sheet(s) from versions of IE earlier than IE9. All other browsers will be able to read the file(s).

<!--[if ! lt IE 9]><!-->
<link rel="stylesheet" href="/css/default.css">
<!--<![endif]-->

For earlier versions of IE, an HTML5 shiv is included and the necessary link elements are created and added to the DOM using JavaScript. This means that when JavaScript is not enabled in IE7 or IE8 the style sheet will not be present, resulting in an unstyled HTML page. In this example, IE6 won’t be served CSS at all.

<!--[if (IE 7)|(IE 8)]>
<script src="/js/html5.js"></script>
<script>
   (function() {
      var link = document.createElement("link");
      link.rel = "stylesheet";
      link.href = "/css/default.css";
      document.getElementsByTagName("head")[0].appendChild(link);
   }());
</script>
<![endif]-->

To support multiple style sheets, an array and for loop can be used.

<!--[if (IE 7)|(IE 8)]>
<script src="/js/html5.js"></script>
<script>
   (function() {
      var css = [
         '/css/default.css',
         '/css/section.css',
         '/css/custom.css'
      ];
      var i;
      var link = document.createElement('link');
      var head = document.getElementsByTagName('head')[0];
      var tmp;

      link.rel = 'stylesheet';

      for(i = 0; i < css.length; i++){
         tmp = link.cloneNode(true);
         tmp.href = css[i];
         head.appendChild(tmp);
      }
   }());
</script>
<![endif]-->

Thanks to Remy Sharp and Mathias Bynens for helping me to improve this script. Fork it.

Rather than serving unstyled content, it may be preferable to provide some simple fallback styles. This can be done by linking to a separate style sheet wrapped in noscript tags. In this example, IE6 will always use these legacy styles while IE7 and IE8 will do so only when JavaScript is disabled.

<!--[if lt IE 9]>
<noscript>
   <link rel="stylesheet" href="/css/legacy.css">
</noscript>
<![endif]-->

You may wish to use a generic style sheet, such as “Universal IE6 CSS”, or spend a few minutes crafting your own and ensuring that the typography and colours approximate those in the default style sheet.

The complete example code is as follows:

<!--[if ! lt IE 9]><!-->
<link rel="stylesheet" href="/css/default.css">
<!--<![endif]-->

<!--[if (IE 7)|(IE 8)]>
<script src="/js/html5.js"></script>
<script>
   (function() {
      var link = document.createElement("link");
      link.rel = "stylesheet";
      link.href = "/css/default.css";
      document.getElementsByTagName("head")[0].appendChild(link);
   }());
</script>
<![endif]-->

<!--[if lt IE 9]>
<noscript>
   <link rel="stylesheet" href="/css/legacy.css">
</noscript>
<![endif]-->

Server-side method: user-agent string detection

The drawbacks of current client-side approaches to IE fallbacks is that they are IE-specific, make extensive use of conditional comments, and have to use JavaScript to create or rewrite link elements. This blog makes use of an alternative approach: server-side user-agent detection. It was inspired by Yahoo!’s Graded Browser Support strategy – created by Nate Koechley – which recommends that all CSS and JavaScript is withheld from legacy browsers (not limited to IE).

The source code in the head of this blog changes when viewed in modern browsers, IE8, and legacy browsers that are incapable of styling HTML5 elements (e.g. Firefox 2) or lack adequate CSS2.1 support (e.g. IE7).

Browsers are assumed to be capable; there is no need to update the script every time a new browser is released. Only when a browser is deemed to be severely incapable is it added to a “blacklist” and served simple styles to ensure that the accessibility of the content is maintained. This is the method I prefer, although it does require more time upfront.

Using within-page links presses the jumped-to content right at the very top of the viewport. This can be a problem when using a fixed header. With a bit of hackery, there are some CSS methods to insert space between the top of the viewport and the target element within a page.

Demo: Jump links and viewport positioning

Known support: varies depending on method used.

This experiment is the result of a post Chris Coyier made on Forrst. Chris’ method was to add an empty span element to the target element, shift the id attribute onto the span, and then absolutely position the span somewhere above it’s parent element.

That method works but it requires changes to the HTML. The comments on Chris’ post suggested the use of psuedo-elements or padding. This experiment expands on, and combines, some of those suggestions to show the limitations of each method and document their browser support.

Simplest method

If you need to jump to an element with simple styling then using the :before pseudo-element is a quick and simple approach.

#target:before {
   content: "";
   display: block;
   height: 50px;
   margin: -30px 0 0;
}

The drawbacks are that it requires browser support for pseudo-elements and it will fail if the target element has a background colour, a repeated background image, padding-top, or border-top as part of its rule set.

More robust method

The more robust method uses a transparent border, negative margin, and the background-clip property. If a top border is required then it can be mimicked using a pseudo-element, as described in Multiple Backgrounds and Borders with CSS 2.1.

#target {
   position: relative;
   border-top: 52px solid transparent;
   margin: -30px 0 0;
   -webkit-background-clip: padding-box;
   -moz-background-clip: padding;
   background-clip: padding-box;
}

#target:before {
   content: "";
   position: absolute;
   top: -2px;
   left: 0;
   right: 0;
   border-top: 2px solid #ccc;
}

There are still drawbacks: it requires browser support for background-clip if there is a background color, gradient, or repeating image set on the target element; it requires browser support for pseudo-elements and their positioning if a top border is desired; and it interferes with the standard use of margins.

To see these methods in action – as well as more details on the code, browser support, and drawbacks – have a look at the demo page. Please let me know if you know of better techniques.

An experiment that uses pseudo-elements to create 84 simple GUI icons using CSS and semantic HTML. Shared as an exercise in creative problem solving and working within constraints. This is not a “production ready” CSS icon set.

Demo: Pure CSS GUI icons

Known support: Firefox 3.5+, Safari 5+, Chrome 5+, Opera 10.6+.

An exercise in constraint

Several months ago I was experimenting with the creation of common GUI icons with CSS. The HTML is very simple and it relies on CSS pseudo-elements rather than extraneous HTML elements. The technical aspects of this exercise might be of interest to others, so I’ve decided to share it.

Pseudo-elements provide many possibilities to developers interested in enhancing existing semantic HTML.

Example code

The technique behind this experiment is an expansion of the basic shape-creation that was used to make Pure CSS speech bubbles. Some of these GUI icons can only be created in browsers that support CSS3 transforms.

The HTML is a basic unordered list of links.

<ul>
  <li class="power"><a href="#non">Power</a></li>
  <li class="play"><a href="#non">Play</a></li>
  <li class="stop"><a href="#non">Stop</a></li>
  <li class="pause"><a href="#non">Pause</a></li>
</ul>

Each icon uses its own set of styles. For example, the key parts of the CSS responsible for the “expand” icon are as follows:

.expand a:before {
  content: "";
  position: absolute;
  top: 50%;
  left: 1px;
  width: 5px;
  height: 0;
  border-width: 7px 7px 0;
  border-style: solid;
  border-color: transparent #c55500;
  margin-top: -4px;
  /* css3 */
  -webkit-transform: rotate(-45deg);
  -moz-transform: rotate(-45deg);
  -o-transform: rotate(-45deg);
  transform: rotate(-45deg);
}

.expand a:after {
  content: "";
  position: absolute;
  top: 50%;
  left: 5px;
  width: 8px;
  height: 8px;
  border-width: 3px 0 0 3px;
  border-style: solid;
  border-color: #c55500;
  margin-top: -6px;
}

.expand a:hover:before,
.expand a:focus:before,
.expand a:active:before {
  border-color: transparent #730800;
}

.expand a:hover:after,
.expand a:focus:after,
.expand a:active:after {
  border-color: #730800;
}

The demo page contains a full set of user interaction and media player control icons, as well as other common icons. For now, several icons actually require more than one element as CSS 2.1 only specifies 2 pseudo-elements per element that can contain generated content. The CSS3 Generated and Replaced Content Module allows for an unlimited number of pseudo-elements but has yet to be fully implemented in any modern browser.

Drop-shadows are easy enough to create using pseudo-elements. It’s a nice and robust way to progressively enhance a design. This post is a summary of the technique and some of the possible appearances.

Demo: CSS drop-shadows without images

Known support: Firefox 3.5+, Chrome 5+, Safari 5+, Opera 10.6+, IE 9+

I’ll be looking mainly at a few details involved in making this effect more robust. Divya Manian covered the basic principle in her article Drop Shadows with CSS3 and Matt Hamm recently shared his Pure CSS3 box-shadow page curl effect.

After a bit of back-and-forth on Twitter with Simurai, and proposing a couple of additions to Divya’s and Matt’s demos using jsbin, I felt like documenting and explaining the parts that make up this technique.

The basic technique

There is no need for extra markup, the effect can be applied to a single element. A couple of pseudo-elements are generated from an element and then pushed behind it.

.drop-shadow {
  position: relative;
  width: 90%;
}

.drop-shadow:before,
.drop-shadow:after {
  content: "";
  position: absolute;
  z-index: -1;
}

The pseudo-elements need to be positioned and given explicit or implicit dimensions.

.drop-shadow:before,
.drop-shadow:after {
  content: "";
  position: absolute;
  z-index: -1;
  bottom: 15px;
  left: 10px;
  width: 50%;
  height: 20%;
}

The next step is to add a CSS3 box-shadow and apply CSS3 transforms. Different types of drop-shadow can be produced by varying these values and the types of transforms applied.

.drop-shadow:before,
.drop-shadow:after {
  content: "";
  position: absolute;
  z-index: -1;
  bottom: 15px;
  left: 10px;
  width: 50%;
  height: 20%;
  box-shadow: 0 15px 10px rgba(0, 0, 0, 0.7);
  transform: rotate(-3deg);
}

One of the pseudo-elements then needs to be positioned on the other side of the element and rotated in the opposite direction. This is easily done by overriding only the properties that need to differ.

.drop-shadow:after{
  right: 10px;
  left: auto;
  transform: rotate(3deg);
 }

The final core code is as shown below. There is just one more addition – max-width – to prevent the drop-shadow from extending too far below very wide elements.

.drop-shadow {
  position: relative;
  width: 90%;
}

.drop-shadow:before,
.drop-shadow:after {
  content: "";
  position: absolute;
  z-index: -1;
  bottom: 15px;
  left: 10px;
  width: 50%;
  height: 20%;
  max-width: 300px;
  box-shadow :0 15px 10px rgba(0, 0, 0, 0.7);
  transform: rotate(-3deg);
}

.drop-shadow:after{
  right: 10px;
  left: auto;
  transform: rotate(3deg);
}

No Firefox 3.0 problems this time

Some pseudo-element hacks require a work-around to avoid looking broken in Firefox 3.0 because that browser does not support the positioning of pseudo-elements. This usually involves implicitly setting their dimensions using offsets.

However, as Divya Manian pointed out to me, in this case we’re only using box-shadow – which Firefox 3.0 doesn’t support – and Firefox 3.0 will ignore the position:absolute declaration for the pseudo-elements. This leaves them with the default display:inline style. As a result, there is no problem explicitly setting the pseudo-element width and height because it won’t be applied to the pseudo-elements in Firefox 3.0.

Further enhancements

From this base there are plenty of ways to tweak the effect by applying skew to the pseudo-elements and modifying the styles of the element itself. A great example of this was shared by Simurai. By adding a border-radius to the element you can give the appearance of page curl.

.drop-shadow {
  border-radius: 0 0 120px 120px / 0 0 6px 6px;
}

I’ve put together a little demo page with a few of drop-shadow effects, including those that build on the work of Divya Manian and Matt Hamm.

If you’ve got your own improvements, please send them to me on Twitter.

Create a simple CSS folded-corner effect without images or extra markup. It works well in all modern browsers and is best suited to designs with simple colour backgrounds.

Demo: Pure CSS folded-corner effect

Known support: Firefox 3.5+, Chrome 4+, Safari 4+, Opera 10+, IE 8+

This post is going to expand on the technique used to create the folded-corner effect that is part of the demo page for Multiple Backgrounds and Borders with CSS 2.1. As a starting point it will look to recreate the appearance of the note style used on the Yiibu‘s fantastic web site. Where Yiibu uses images, this will use pseudo-elements.

Nothing complicated. Any element will do and there’s no need for extra markup. It’s just a simple coloured box to start with. Browsers with no support for pseudo-elements, such as IE6 and IE7, will only be capable of displaying this.

Adding position:relative makes it possible to absolutely position the pseudo-element.

.note {
  position: relative;
  width: 30%;
  padding: 1em 1.5em;
  margin: 2em auto;
  color: #fff;
  background: #97C02F;
}

The folded-corner

The folded-corner is created from a pseudo-element that is positioned in the top corner of the box. The pseudo-element has no width or height but is given a thick border. Varying the size of the border will vary the size of the folded-corner.

In this example, the top and right borders are set to colours that match the background colour of the box’s parent. The left and bottom border are then given a slightly darker or lighter shade of the box’s background colour.

.note:before {
  content: "";
  position: absolute;
  top: 0;
  right: 0;
  border-width: 0 16px 16px 0;
  border-style: solid;
  border-color: #658E15 #fff;
}

This is all that’s needed to create a simple folded-corner effect like that found on Yiibu.

Firefox 3.0 doesn’t allow for the positioning of pseudo-elements. You can throw in a couple of extra styles to help tidy things up in that browser.

.note:before {
  ...
  display: block;
  width: 0;
}

Adding a subtle shadow

The appearance of a fold can be slightly enhanced by adding a box-shadow (for browsers that support it) to the pseudo-element. Setting overflow:hidden on the note itself will help hide parts of the shadow that would disrupt the folded-corner effect.

.note:before {
  ...
  -webkit-box-shadow: 0 1px 1px rgba(0,0,0,0.3), -1px 1px 1px rgba(0,0,0,0.2);
  -moz-box-shadow: 0 1px 1px rgba(0,0,0,0.3), -1px 1px 1px rgba(0,0,0,0.2);
  box-shadow: 0 1px 1px rgba(0,0,0,0.3), -1px 1px 1px rgba(0,0,0,0.2);
}

Rounded corners

It’s also relatively simple to make this work with rounded corners if desired. Unfortunately, every modern browser has some form of border-radius bug – including those using the non-prefixed property – which means a slight work around is needed.

Webkit browsers are the only browsers that can come anywhere close to rounding the corner of the pseudo-element if it only has 2 borders. Opera 11 and Firefox 3.6 make a mess of it. Opera 11 makes the biggest mess.

Using 4 borders avoids the problems in Opera 11 and Firefox 3.6. But it will trigger a bug in Safari 5 that leaves the diagonal looking a little jaggy. We can get around this problem by setting at least one border colour to be transparent.

When a background colour is applied to the pseudo-element it will show through the transparent border. Ideally, this approach would form the basis of the entire effect because we could reduce the amount of code needed. But Opera 11 will not show the background colour through the transparent borders unless a border-radius has been set.

.note-rounded:before {
  content: "";
  position: absolute;
  top: 0;
  right: 0;
  border-width: 8px;
  border-color: #fff #fff transparent transparent;
  background: #658E15;
  -moz-border-radius: 0 0 0 5px;
  border-radius: 0 0 0 5px;
  display: block;
  width: 0;
}

The CSS file on the demo page has more comments on the work arounds. Every browser has its own peculiarities when it comes to using border-radius or borders on elements with no width or height. This is the merely simplest solution I’ve found to deal with those browser inconsistencies.

The final code

This is all the CSS needed to create a simple folded-corner effect, with a subtle shadow, from a single HTML element. To include a variant with rounded corners, the “note” object can be extended with the modifications described previously.

.note {
  position: relative;
  width: 30%;
  padding: 1em 1.5em;
  margin: 2em auto;
  color: #fff;
  background: #97C02F;
  overflow: hidden;
}

.note:before {
  content: "";
  position: absolute;
  top: 0;
  right: 0;
  border-width: 0 16px 16px 0;
  border-style: solid;
  border-color: #fff #fff #658E15 #658E15;
  background: #658E15;
  -webkit-box-shadow: 0 1px 1px rgba(0,0,0,0.3), -1px 1px 1px rgba(0,0,0,0.2);
  -moz-box-shadow: 0 1px 1px rgba(0,0,0,0.3), -1px 1px 1px rgba(0,0,0,0.2);
  box-shadow: 0 1px 1px rgba(0,0,0,0.3), -1px 1px 1px rgba(0,0,0,0.2);
  /* Firefox 3.0 damage limitation */
  display: block; width: 0;
}

.note.rounded {
  -moz-border-radius: 5px 0 5px 5px;
  border-radius: 5px 0 5px 5px;
}

.note.rounded:before {
  border-width: 8px;
  border-color: #fff #fff transparent transparent;
  -moz-border-radius: 0 0 0 5px;
  border-radius: 0 0 0 5px;
}

The demo page shows the final effect, an example with rounded corners, and how different coloured notes are easy to create from this base.

This technique works less well when the element receiving the folded-corner effect is sitting on top of a background image rather than a simple background colour. However, the same limitation exists for image-based methods of creating this effect.

Emulating background image crop, background image opacity, background transforms, and improved background positioning. A few hacks relying on CSS pseudo-elements to emulate features unavailable or not yet widely supported by modern browsers.

Demos: Example CSS background image hacks

Pseudo-element hacks can fill some gaps in existing browser support for CSS features, without resorting to presentational HTML. In some cases, they even make it possible to emulate things that are not currently part of any W3C working draft, like background transforms and background image opacity.

Most of the hacks in this article tie in with the pseudo-element hack described in an earlier article – Multiple Backgrounds and Borders with CSS 2.1. That article already describes how to emulate multiple background support and its demo page shows several other uses of the basic principle. This article presents a few of those effects and applications in greater detail.

Emulating background-crop

Known support: Firefox 3.5+, Opera 10+, Safari 4+, Chrome 4+, IE 8+

Demo: Pseudo background-crop

Background image cropping can be emulated in modern browsers using only CSS 2.1. The principle behind a pseudo background-crop is to apply a background-image to a pseudo-element rather than the element itself. One example would be to crop an image to display in the background. Another would be to crop an image sprite to display icons alongside text in links.

In several cases, using pseudo-elements may have advantages over existing, alternative techniques because it combines their strengths and avoids some of their weaknesses.

Google, Facebook, and Twitter all make use of empty DOM elements to crop dense sprites and display icons next to certain links in their interfaces. The alternative is not to use empty elements but be forced into using multiple images and/or to design sub-optimal image sprites that have their component images spaced out.

Pseudo-elements can be used in much the same way as empty DOM elements. This simultaneously eliminates the need for presentational HTML and doesn’t depend so heavily on an image sprite’s design. Using pseudo-elements for this purpose does have its own drawback – a lack of support in legacy browsers like IE6 and IE7. However, the technique will progressively enhance capable browsers while leaving a perfectly usable experience for incapable browsers.

Example code: cropping a sprite

This example shows how to crop icons that are part of a dense image sprite that uses a 16px × 16px grid. It uses a simple list and specifies a class for each type of action.

<ul class="actions">
  <li class="save"><a href="#">Save</a></li>
  <li class="delete"><a href="#">Delete</a></li>
  <li class="share"><a href="#">Share</a></li>
  <li class="comment"><a href="#">Comment</a></li>
</ul>

Styling can be applied to present this list in whatever way is needed. From that base, a pseudo-element can be created and then treated as you would an empty, inline DOM element (e.g. <span>).

In this case, the :before pseudo-element is used and sized to match the sprite’s grid unit. It could be sized to whatever dimensions are required to match a section of the sprite that needs to be cropped.

.actions a:before {
  content: "";
  float: left;
  width: 16px;
  height: 16px;
  margin: 0 5px 0 0;
  background: url(sprite.png);
}

.save a:before { background-position: 0 -16px; }
.delete a:before { background-position: 0 -32px; }
.share a:before { background-position: 0 -48px; }
.comment a:before { background-position: 0 -64px; }

Providing hover, focus, active, and “saved” states is just a case of declaring the correct background position in each case.

.save a:hover:before,
.save a:focus:before,
.save a:active:before {
  background-position: -16px -16px;
}

.saved a:before {
  background-position: -32px -16px;
}

Future alternatives

In the future, there will be other alternatives. Firefox 3.6 added -moz-image-rect to allow background images to be cropped. But this is not supported by other browsers and looks likely to be replaced by an alternative proposal (to use fragment identifiers) that is part of the CSS Image Values Module Level 3 specification. As far as I know, no stable release of any modern browser supports the use of fragment identifiers with bitmap images at the time of writing.

Emulating background-transform

Known support: Firefox 3.6+, Opera 10.5+, Safari 4+, Chrome 4+, IE 9+

Demo: Pseudo background-transform

Combining pseudo-elements and transforms makes it possible to emulate background transforms. A pseudo background-transform can be used to rotate, scale, and skew background images and sprites. There is no proposal for background-image transforms, so a pseudo-element hack is one way to emulate it.

Example: rotating a background image

The example of cropping sprites can be further developed by reducing the number of different images used in the sprite. Rather than applying transforms to images in a graphics package, they can be applied in the CSS.

The code to do this is relatively simple and might look something like:

.accordion a:before {
  content: "";
  float: left;
  width: 16px;
  height: 16px;
  margin: 0 5px 0 0;
  background: url(sprite.png) no-repeat 0 0;
}

.accordion.open a:before {
  transform: rotate(90deg);
}

To apply a transform to a more conventional background image (e.g., a large graphic sitting behind some content that doesn’t affect the positioning of other components) requires use of the positioning technique detailed in the article Multiple Backgrounds and Borders with CSS 2.1.

It involves setting the background image on a pseudo-element which is then positioned behind the content layer of an element using absolute positioning and z-index.

Example: mirroring a background image

There are instances when mirroring a background image might be desired. The approach is similar to that for rotating an image, but this time uses transform:scale().

Producing an exact mirror of an element or pseudo-element can be done using transform:scaleX(-1), transform:scaleY(-1), and transform:scale(-1,-1) to mirror along the x-axis, y-axis, and both axes, respectively.

The following code is an example of how a pseudo background-transform might be used for pagination links. A pseudo-element displays a single image (or region of a sprite) and is then mirrored. The image’s appearance is such that a rotation cannot produce the desired counterpart. Only a scale operation can do it.

.prev a:before,
.next a:before {
  content: "";
  float: left;
  width: 16px;
  height: 16px;
  margin: 0 5px 0 0;
  background: url(sprite.png) no-repeat 0 0;
}

.next a:before {
  float: right;
  margin: 0 0 0 5px;
  transform: scaleX(-1);
}

There is no support for this in IE 8. Even if you’re a fan of using IE filters to work around some missing CSS support, they won’t work on pseudo-elements.

Future alternatives

There don’t seem to be any future alternatives in any CSS working draft. For the moment, it looks like pseudo-element hacks will be needed to emulate effects like background transforms and background perspective without resorting to presentational HTML.

Emulating background-position

Known support: Firefox 3.5+, Opera 10+, Safari 4+, Chrome 4+, IE 8+

Demo: Pseudo background-position

The CSS 2.1 specification limits the values of background-position to offsets from the left and top sides. It’s possible to emulate positioning a background image from the right and bottom sides by applying the background image to a pseudo-element and using it as an additional background layer.

This hack is easily combined with the other hacks in this article. More details on the pseudo background-position hack can be found in the article on Multiple Backgrounds and Borders with CSS 2.1.

Example code

In this example, a pseudo-element is created and placed behind the element’s content layer. The background image is 500px × 300px and declared for the pseudo-element, which is also given dimensions that match those of the image. Since the pseudo-element is absolutely positioned, it can be positioned from the bottom and right of the element using offsets.

#content {
  position: relative;
  z-index: 1;
}

#content:before {
  content: "";
  position: absolute;
  z-index: -1;
  bottom: 10px;
  right: 10px;
  width: 500px;
  height: 300px;
  background: url(image.jpg);
}

Future alternatives

There is a part of the CSS Backgrounds and Borders module working draft that describes an improvement to the background-position property to allow positions to be set from any side. At the moment, Opera 11 is the only stable release of a browser that has implemented it.

Emulating background-opacity

Known support: Firefox 3.5+, Opera 10+, Safari 4+, Chrome 4+, IE 9+

Demo: Pseudo background-opacity

Changing the opacity of a pseudo-background is as simple as modifying the value of the opacity property. There is no IE 8 support for opacity and IE filters will not work on pseudo-elements.

Example code

This example code shows a pseudo-element being created and positioned behind the rest of the element’s content so as not to interfere with it. The pseudo-element is then sized to fit the element using offsets (but could be offset by other values or given an explicit size), given a background image, and has its opacity changed.

#content {
  position: relative;
  z-index: 1;
}

#content:before {
  content: "";
  position: absolute;
  z-index: -1;
  top: 0;
  bottom: 0;
  left: 0;
  right: 0;
  background: url(image.jpg);
  opacity: 0.7;
}

Notes

For now, and as far as I am aware, using CSS 2.1 pseudo-elements is the only widely supported (and backwards compatible) way to emulate background image crop, background transform, background opacity, and improved background positioning with semantic HTML.

Even when alternatives in CSS working drafts (e.g., the improved background-position and use of fragment identifiers) are widely implemented, pseudo-element background-image hacks will still have the advantage of letting you use other CSS properties like opacity, border-radius, border-image, box-shadow, transforms, etc., which may prove useful in certain situations. It can’t hurt to be aware of these options.

It’s worth mentioning that although you can only generate 2 pseudo-elements from a DOM element, in many cases you can easily use descendant elements to provide more pseudo-elements to play with. This idea was used to help create the rotated example on the CSS drop-shadows demo page and several of the CSS3 examples at the bottom of the pure CSS speech bubbles demo page.

Thanks to Mathias Bynens for reading and giving feedback on a draft of this article.

The clearfix hack is a popular way to contain floats without resorting to using presentational markup. This article presents an update to the clearfix method that further reduces the amount of CSS required.

Demo: Micro clearfix hack

Known support: Firefox 3.5+, Safari 4+, Chrome, Opera 9+, IE 6+

The “micro clearfix” method is suitable for modern browsers and builds upon Thierry Koblentz’s “clearfix reloaded”, which introduced the use of both the :before and :after pseudo-elements.

Here is the updated code (I’ve used a shorter class name too):

/**
 * For modern browsers
 * 1. The space content is one way to avoid an Opera bug when the
 *    contenteditable attribute is included anywhere else in the document.
 *    Otherwise it causes space to appear at the top and bottom of elements
 *    that are clearfixed.
 * 2. The use of `table` rather than `block` is only necessary if using
 *    `:before` to contain the top-margins of child elements.
 */
.cf:before,
.cf:after {
    content: " "; /* 1 */
    display: table; /* 2 */
}

.cf:after {
    clear: both;
}

/**
 * For IE 6/7 only
 * Include this rule to trigger hasLayout and contain floats.
 */
.cf {
    *zoom: 1;
}

This “micro clearfix” generates pseudo-elements and sets their display to table. This creates an anonymous table-cell and a new block formatting context that means the :before pseudo-element prevents top-margin collapse. The :after pseudo-element is used to clear the floats. As a result, there is no need to hide any generated content and the total amount of code needed is reduced.

Including the :before selector is not necessary to clear the floats, but it prevents top-margins from collapsing in modern browsers. This has two benefits:

• It ensures visual consistency with other float containment techniques that create a new block formatting context, e.g., overflow:hidden
• It ensures visual consistency with IE 6/7 when zoom:1 is applied.

N.B.: There are circumstances in which IE 6/7 will not contain the bottom margins of floats within a new block formatting context. Further details can be found here: Better float containment in IE using CSS expressions.

The use of content:" " (note the space in the content string) avoids an Opera bug that creates space around clearfixed elements if the contenteditable attribute is also present somewhere in the HTML. Thanks to Sergio Cerrutti for spotting this fix. An alternative fix is to use font:0/0 a.

Legacy Firefox

Firefox < 3.5 will benefit from using Thierry’s method with the addition of visibility:hidden to hide the inserted character. This is because legacy versions of Firefox need content:"." to avoid extra space appearing between the body and its first child element, in certain circumstances (e.g., jsfiddle.net/necolas/K538S/.)

Alternative float-containment methods that create a new block formatting context, such as applying overflow:hidden or display:inline-block to the container element, will also avoid this behaviour in legacy versions of Firefox.

Research into improving the cross-browser consistency of both the “clearfix” and “overflow:hidden” methods of containing floats. The aim is to work around several bugs in IE6 and IE7.

This article introduces a new hack (with caveats) that can benefit the “clearfix” methods and the new block formatting context (NBFC) methods (e.g. using overflow:hidden) of containing floats. It’s one outcome of a collaboration between Nicolas Gallagher (that’s me) and Jonathan Neal.

If you are not familiar with the history and underlying principles behind methods of containing floats, I recommend that you have a read of Easy clearing (2004), Everything you know about clearfix is wrong (2010), and Clearfix reloaded and overflow:hidden demystified (2010).

Consistent float containment methods

The code is show below and documented in this GitHub gist. Found an improvement or flaw? Please fork the gist or leave a comment.

Micro clearfix hack: Firefox 3.5+, Safari 4+, Chrome, Opera 9+, IE 6+

.cf {
  /* for IE 6/7 */
  *zoom: expression(this.runtimeStyle.zoom="1", this.appendChild(document.createElement("br")).style.cssText="clear:both;font:0/0 serif");
  /* non-JS fallback */
  *zoom: 1;
}

.cf:before,
.cf:after {
  content: "";
  display: table;
}

.cf:after {
  clear: both;
}

Overflow hack (NBFC): Firefox 2+, Safari 2+, Chrome, Opera 9+, IE 6+

.nbfc {
  overflow: hidden;
  /* for IE 6/7 */
  *zoom: expression(this.runtimeStyle.zoom="1", this.appendChild(document.createElement("br")).style.cssText="clear:both;font:0/0 serif");
  /* non-JS fallback */
  *zoom: 1;
}

The GitHub gist also contains another variant of the clearfix method for modern browsers (based on Thierry Koblentz’s work). It provides greater visual consistency (avoiding edge-case bugs) for even older versions of Firefox.

The only difference from existing float-containment methods is the inclusion of a CSS expression that inserts a clearing line-break in IE 6 and IE 7. Jonathan and I found that it helps to resolve some of the visual rendering differences that exist between these browsers and more modern ones. First I’ll explain what some of those differences are and when they occur.

Containing floats in IE 6/7

In IE 6 and IE 7, the most common and robust method of containing floats within an element is to give it “layout” (find out more: On having Layout). Triggering “layout” on an element in IE 6/7 creates a new block formatting context (NBFC). However, certain IE bugs mean that previous float containment methods don’t result in cross-browser consistency. Specifically, this is what to expect in IE 6/7 when creating a NBFC:

1. The top- and bottom-margins of non-floated child elements are contained within the ancestor element that has been given “layout”. (Also expected in other browsers when creating a NBFC)
2. The bottom-margins of any right-floated descendants are contained within the ancestor. (Also expected in other browsers when creating a NBFC)
3. The bottom-margins of any left-floated children are not contained within the ancestor. The margin has no effect on the height of the ancestor and is truncated, having no affect outside of the ancestor either. (IE 6/7 bug)
4. In IE 6, if the right edge of the margin-box of a left-floated child is within 2px of the left edge of the content-box of its NBFC ancestor, the float’s bottom margin reappears and is contained within the parent. (IE 6 bug)
5. Unwanted white-space can appear at the bottom of a float-container. (IE 6/7 bug)

There is a lack of consistency between IE 6/7 and other browsers, and between IE 6 and IE 7. Thanks to Matthew Lein for his comment that directed me to this IE 6/7 behaviour. It was also recently mentioned by “Suzy” in a comment on Perishable Press.

IE 6/7’s truncation of the bottom-margin of left-floats is not exposed in many of the test-cases used to demonstrate CSS float containment techniques. Using an IE-only CSS expression helps to correct this bug.

The CSS expression

Including the much maligned <br style="clear:both"> at the bottom of the float-container, as well as creating a NBFC, resolved all these inconsistencies in IE 6/7. Doing so prevents those browsers from collapsing (or truncating) top- and bottom-margins of descendant elements.

Jonathan suggested inserting the clearing line-break in IE 6/7 only, using CSS expressions applied to fictional CSS properties. The CSS expression is the result of many iterations, tests, and suggestions. It runs only once, the first time an element receives the associated classname.

*zoom: expression(this.runtimeStyle.zoom="1", this.appendChild(document.createElement("br")).style.cssText="clear:both;font:0/0 serif");

It is applied to zoom, which is already being used to help contain floats in IE 6/7, and the use of the runtimeStyle object ensures that the expression is replaced once it has been run. The addition of font:0/0 serif prevents the occasional appearance of white-space at the bottom of a float-container. And the * hack ensures that only IE 6 and IE 7 parse the rule.

It’s worth noting that IE 6 and IE 7 parse almost any string used as CSS property. An earlier iteration used the entirely fictitious properties “-ms-inject” or “-ie-x” property to exploit this IE behaviour.

*-ie-x: expression(this.x||(this.innerHTML+='<br style="clear:both;font:0/0">',this.x=1));

However, this expression is evaluated over and over again. Using runtimeStyle instead avoids this. Sergey Chikuyonok also pointed out that using innerHTML destroys existing HTML elements that may event handlers attached to them. By using document.createElement and appendChild you can insert the new element without removing all the events attached to other descendant elements.

Containing floats in more modern browsers

There are two popular methods to contain floats in modern browsers. Creating a new block formatting context (as is done in IE 6/7 when hasLayout is triggered) or using a variant of the “clearfix” hack.

Creating a NBFC results in an element containing any floated children, and will prevent top- and bottom-margin collapse of non-floated children. When combined with the enhanced IE 6/7 containment method, it results in consistent cross-browser float containment.

The other method, known as “clearfix”, traditionally used a single :after pseudo-element to clear floats in a similar fashion to a structural, clearing HTML line-break. However, to prevent the top-margins of non-floats from collapsing into the margins of their float-containing ancestor, you also need to use the :before pseudo-element. This is the approach taken in Thierry Koblentz’s “clearfix reloaded”. In contemporary browsers, the micro clearfix hack is also suitable.

The method presented in this article should help improve the results of cross-browser float containment, whether you predominantly use “clearfix” or the NBFC method. The specific limitations of both the “clearfix” and various NBFC methods (as outlined in Thierry’s articles) remain.

Problems

Using a CSS expression to change the DOM in IE 6/7 creates problems of its own. Obviously, the DOM in IE 6/7 is now different to the DOM in other browsers. This affects any JavaScript DOM manipulation that may depend on :last-child or appending new children.

This is still an experimental work-in-progress that is primarily research-driven rather than seeking to become a practical snippet of production code. Any feedback, further testing, and further experimentation from others would be much appreciated.

Thanks to these people for contributing improvements: Jonathan Neal, Mathias Bynens, Sergey Chikuyonok, and Thierry Koblentz.

Future CSS implementations should allow for some form of responsive images via CSS alone. This is an early idea for how that might be done. However, a significant drawback is that it would not prevent both “mobile optimised” and larger size images from being requested at larger screen resolutions.

Note that the CSS presented here is not supported in any browsers at the time of writing.

This method relies on the use of @media queries, CSS3 generated content, and the CSS3 extension to the attr() function.

The principles are basically the same as those underpinning Filament Group’s work on Responsive Images. The source image is “mobile optimised” and the urls of larger size images are included using HTML data-* attributes.

<img src="image.jpg"
     data-src-600px="image-600px.jpg"
     data-src-800px="image-800px.jpg"
     alt="">

Using CSS @media queries you can target devices above certain widths. Within each media query block, images with larger alternatives can be targeted using an attribute selector.

CSS3 generated content allows you to replace the content of any element using the content property. At the moment, only Opera 10+ supports it. In CSS 2.1, the content property is limited to use with the :before and :after pseudo-elements.

By combining the content property with the CSS3 extension to attr(), you will be able to specify that an attribute’s value is interpreted as the URL part of a url() expression. In this case, it means you will be able to replace an image’s content with the image found at the destination URL stored in a custom HTML data-* attribute.

@media (min-device-width:600px) {
  img[data-src-600px] {
    content: attr(data-src-600px, url);
  }
}

@media (min-device-width:800px) {
  img[data-src-800px] {
    content: attr(data-src-800px, url);
  }
}

Fork the Gist

Issues

Unfortunately, there are a number of issues with this technique.

1. It doesn’t prevent multiple assets being downloaded at larger screen widths because network activity kicks in before CSS is applied. That means, for example, that desktop environments would make 2 HTTP requests for an image and have to load more assets than if they had been served only the larger image in the source.
2. It makes the assumption that wider screens are tied to better internet connections.
3. It forces authors to create and maintain multiple image sizes for each image.
4. At present, using the context menu (or drag and drop) to copy the image will result in the source file being copied and not the replacement image.
5. It doesn’t account for devices with different pixel densities.

Applying conditional classnames to the html element is a popular way to help target specific versions of IE with CSS fixes. It was first described by Paul Irish and is a feature of the HTML5 Boilerplate. Despite all its benefits, there are still a couple of niggling issues. Here are some hacky variants that side-step those issues.

An article by Paul Irish, Conditional stylesheets vs CSS hacks? Answer: Neither!, first proposed that conditional comments be used on the opening html tag to help target legacy versions of IE with CSS fixes. Since its inclusion in the HTML5 Boilerplate project, contributors have further refined the technique.

However, there are still some niggling issues with the “classic” conditional comments approach, which Mathias Bynens summarized in a recent article on safe CSS hacks.

1. The Compatibility View icon is displayed in IE8 and IE9 if you are not setting the X-UA-Compatible header in a server config.
2. The character encoding declaration might not be fully contained within the first 1024 bytes of the HTML document if you need to include several attributes on each version of the opening html tag (e.g. Facebook xmlns junk).

You can read more about the related discussions in issue #286 and issue #378 at the HTML5 Boilerplate GitHub repository.

The “bubble up” conditional comments method

Although not necessarily recommended, it looks like both of these issues can be avoided with a bit of trickery. You can create an uncommented opening html tag upon which any shared attributes (so no class attribute) can be set. The conditional classes are then assigned in a second html tag that appears after the <meta http-equiv="X-UA-Compatible"> tag in the document. The classes will “bubble up” to the uncommented tag.

<!DOCTYPE html>
<html lang="en">
  <head>
    <meta http-equiv="X-UA-Compatible"
          content="IE=edge,chrome=1">
    <meta charset="utf-8">
    <!--[if lt IE 7]><html class="no-js ie6"><![endif]-->
    <!--[if IE 7]><html class="no-js ie7"><![endif]-->
    <!--[if IE 8]><html class="no-js ie8"><![endif]-->
    <!--[if gt IE 8]><!--><html class="no-js"><!--<![endif]-->

    <title>Document</title>
  </head>
  <body>
  </body>
</html>

Fork the Gist

The result is that IE8 and IE9 won’t ignore the <meta http-equiv="X-UA-Compatible"> tag, the Compatibility View icon will not be displayed, and the amount of repeated code is reduced. Obviously, including a second html tag in the head isn’t pretty or valid HTML.

If you’re using a server-side config to set the X-UA-Compatible header (instead of the meta tag), then you can still benefit from the DRYer nature of using two opening html tags and it isn’t necessary to include the conditional comments in the head of the document. However, you might still want to do so if you risk not containing the character encoding declaration within the first 1024 bytes of the document.

<!DOCTYPE html>
<html lang="en">
<!--[if lt IE 7]><html class="no-js ie6"><![endif]-->
<!--[if IE 7]><html class="no-js ie7"><![endif]-->
<!--[if IE 8]><html class="no-js ie8"><![endif]-->
<!--[if gt IE 8]><!--><html class="no-js"><!--<![endif]-->
  <head>
    <meta charset="utf-8">
    <title>Document</title>
  </head>
  <body>
  </body>
</html>

Fork the Gist

The “preemptive” conditional comments method

Another method to prevent the Compatibility View icon from showing was found by Julien Wajsberg. It relies on including a conditional comment before the DOCTYPE. Doing this seems to help IE recognise the <meta http-equiv="X-UA-Compatible"> tag. This method isn’t as DRY and doesn’t have the character encoding declaration as high up in the document, but it also doesn’t use 2 opening html elements.

<!--[if IE]><![endif]-->
<!DOCTYPE html>
<!--[if lt IE 7]><html class="no-js ie6"><![endif]-->
<!--[if IE 7]><html class="no-js ie7"><![endif]-->
<!--[if IE 8]><html class="no-js ie8"><![endif]-->
<!--[if gt IE 8]><!--><html class="no-js"><!--<![endif]-->
  <head>
    <meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1">
    <meta charset="utf-8">
    <title>Document</title>
  </head>
  <body>
  </body>
</html>

Fork the Gist

While it’s interesting to explore these possibilities, the “classic” method is still generally the most understandable. It doesn’t create invalid HTML, doesn’t risk throwing IE into quirks mode, and you won’t have a problem with the Compatibility View icon if you use a server-side config.

If you find any other approaches, or problems with those posted here, please leave a comment but also consider adding what you’ve found to the relevant issues in the HTML5 Boilerplate GitHub repository.

Thanks to Paul Irish for feedback and suggestions.

I’ve started using a backup strategy based on that originally described by Jamie Zawinski and subsequently covered in Jeff Atwood’s What’s your backup strategy? article. It works by incrementally backing up your data to a bootable clone of your computer’s internal drive, in order to replace the internal drive when it fails.

This script is maintained in my dotfiles repo. Please report problems or improvements in the issue tracker.

This post is mainly to document – for myself as much as anything – the process I went through in order to implement an incremental backup strategy in OS X 10.6+. Use at your own risk. Feel free to suggest improvements if you know of any.

Formatting and partitioning the drive

With your backup drive in its enclosure, connect the drive to your Mac and open the Disk Utility application.

1. Click on the disk’s name. This should bring up a “Partition” tab in the right panel.
2. Click on the “Partition” tab.
3. Under “Volume scheme” select the number of partitions you need. Probably “1 partition” if it is to match your internal disk.
4. Under “Name” enter the volume name you want to use, e.g., “Backup”.
5. Under “Format” select “Mac OS X Extended (Journaled)”, which is necessary if the disk is to be bootable.
6. Click “Options” and check that “GUID Partition Table” is selected.
7. Click “Apply”.

This will format and partition the disk. The partition(s) should now show up in the Finder and on the Desktop.

Enable ownership permissions

The new partition needs permissions to be enabled to avoid chown errors when using rsync. To do this, select the partition and view its information page (using “Get Info” or Command+I). Expand the “Ownership & Permissions” section and uncheck “Ignore ownership on this volume”

Backup script

The backup script uses rsync – a fast and versatile file copying tool – to manage the copying and moving of data between volumes. You need to install rsync 3 (this is easily done using Homebrew: brew install https://raw.github.com/Homebrew/homebrew-dupes/master/rsync.rb). Rsync offers a wide variety of options and only copies the differences between the source files and the existing files in the destination, making it ideal for incremental backups. You can find out more about rsync in the rsync documentation

The following is the contents of a script I’ve named backup. I’m using it to backup all of the data on my internal disk, with a specified set of exceptions contained within a file called .backupignore.

#!/bin/bash

# Disc backup script
# Requires rsync 3

# Ask for the administrator password upfront
sudo -v

# IMPORTANT: Make sure you update the `DST` variable to match the name of the
# destination backup drive

DST="/Volumes/Macintosh HD/"
SRC="/"
EXCLUDE="$HOME/.backupignore"

PROG=$0

# --acls                   update the destination ACLs to be the same as the source ACLs
# --archive                turn on archive mode (recursive copy + retain attributes)
# --delete                 delete any files that have been deleted locally
# --delete-excluded        delete any files (on DST) that are part of the list of excluded files
# --exclude-from           reference a list of files to exclude
# --hard-links             preserve hard-links
# --one-file-system        don't cross device boundaries (ignore mounted volumes)
# --sparse                 handle sparse files efficiently
# --verbose                increase verbosity
# --xattrs                 update the remote extended attributes to be the same as the local ones

if [ ! -r "$SRC" ]; then
    logger -t $PROG "Source $SRC not readable - Cannot start the sync process"
    exit;
fi

if [ ! -w "$DST" ]; then
    logger -t $PROG "Destination $DST not writeable - Cannot start the sync process"
    exit;
fi

logger -t $PROG "Start rsync"

sudo rsync --acls 
           --archive 
           --delete 
           --delete-excluded 
           --exclude-from=$EXCLUDE 
           --hard-links 
           --one-file-system 
           --sparse 
           --verbose 
           --xattrs 
           "$SRC" "$DST"

logger -t $PROG "End rsync"

# Make the backup bootable
sudo bless -folder "$DST"/System/Library/CoreServices

exit 0

Adapted from the rsync script at Automated OSX backups with launchd and rsync

This is the contents of the .backupignore file.

.Spotlight-*/
.Trashes
/afs/*
/automount/*
/cores/*
/dev/*
/Network/*
/private/tmp/*
/private/var/run/*
/private/var/spool/postfix/*
/private/var/vm/*
/Previous Systems.localized
/tmp/*
/Volumes/*
*/.Trash

Adapted from the excludes file at Automated OSX backups with launchd and rsync

Every time the script runs, messages will be written to the system log.

Check that the source (SRC) and destination (DST) paths in the script are correct and match the volume name that you chose when partitioning the disk. Wrapping the $SRC and $DST variables in double quotes ensures that the script will work even if your volume names contain spaces (e.g. “Macintosh Backup”).

The command option --exclude-from tells the script where to find the file containing the exclude patterns. Make sure you either have .backupignore in the home directory or that you update this part of the command to reference the full path of the excludes file.

Running the backup script

You can run the script from the command line, or make it executable from the Finder or the Desktop:

1. Type the following into the command line to ensure that you have permission to execute the script:

   chmod +x /path/to/rsync_backup.sh
   

2. Remove the .sh extension from the script.

3. Create an alias of the script and move it to the Desktop.
4. Double click the icon to run the backup script.

It’s important to run the script regularly in order to keep the backup in sync with your internal disk. If you have a desktop computer, or you never turn off your laptop, you can automate the running of the script by setting up a cron job.

Checking the disk is bootable

Once you’ve run the backup script, you should test that the backup disk is bootable. To do this, restart your computer and hold down the Alt/Option key. Your backup disk should be presented, with the volume name you chose, as a bootable disk.

When I first booted my backup, the terminal displayed the following line:

dyld: shared cached file was build against a different libSystem.dylib, ignoring cache

According to this article, the fix for this is to update the cache by entering the following into the terminal:

sudo update_dyld_shared_cache -force

That should be everything you need to start implementing an incremental backup strategy when using OS X.

The git-checkout command can be used to update specific files or directories in your working tree with those from another branch, without merging in the whole branch. This can be useful when working with several feature branches or using GitHub Pages to generate a static project site.

The git-checkout manual page describes how the git checkout command is not just useful for switching between branches.

When <paths> or --patch are given, git checkout does not switch branches. It updates the named paths in the working tree from the index file or from a named <tree-ish> (most often a commit)…The <tree-ish> argument can be used to specify a specific tree-ish (i.e. commit, tag or tree) to update the index for the given paths before updating the working tree.

In git, a tree-ish is a way of referring to a particular commit or tree. This can be a partial sha or the branch, remote, and tag name pointers.

The syntax for using git checkout to update the working tree with files from a tree-ish is as follows:

git checkout [-p|--patch] [<tree-ish>] [--] <pathspec>…

Therefore, to update the working tree with files or directories from another branch, you can use the branch name pointer in the git checkout command.

git checkout <branch_name> -- <paths>

As an example, this is how you could update your gh-pages branch on GitHub (used to generate a static site for your project) to include the latest changes made to a file that is on the master branch.

# On branch master
git checkout gh-pages
git checkout master -- myplugin.js
git commit -m "Update myplugin.js from master"

The need to update my gh-pages branch with specific files from my master branch was how I first found out about the other uses of the checkout command. It’s worth having a read of the rest of the git-checkout manual page and experimenting with the options.

CSS is a versatile style language that is most frequently used to control the look and formatting of an HTML document based on information in the document tree. But there are some common publishing effects – such as formatting the first line of a paragraph – that would not be possible if you were only able to style elements based on this information. Fortunately, CSS has pseudo-elements and pseudo-classes.

As their names imply, they are not part of the DOM in the way that ‘real’ HTML elements and classes are. Instead, they are CSS abstractions that provide additional, and otherwise inaccessible, information about the document.

This article will discuss the CSS pseudo-elements that are part of CSS 2.1 – :first-letter, :first-line, :before, and :after – and how the :before and :after pseudo-elements can be exploited to create some interesting effects, without compromising the simplicity of your HTML. But first, let’s look at each type of pseudo-element and how to use them in their basic form.

The :first-line and :first-letter pseudo-elements

The :first-line pseudo-element lets you apply styles to the first formatted line of a block container element (i.e., elements with their display property set to block, inline-block, list-item, table-caption, or table-cell). For example:

p:first-line { font-weight: bold; }

…will change the first line of every paragraph to bold. The :first-line pseudo-element can be treated as if it were an extra HTML inline element wrapping only the first line of text in the paragraph.

The :first-letter pseudo-element lets you apply styles to the first letter (and any preceding punctuation) of the first formatted line of a block container element. No other inline content (e.g. an image) can appear before the text. For example:

p:first-letter { float: left; font-size: 200%; }

…will produce a basic ‘drop cap’ effect. The first letter of every paragraph will be floated left, and twice as large as the other letters in the paragraph. The :first-letter pseudo-element can be treated as if it were an extra HTML inline element wrapping only the first letter of text in the paragraph.

The :first-line and :first-letter pseudo-elements can only be attached to block container elements, but the first formatted line can be contained within any block-level descendant (e.g., elements with their display property set to block or list-item) in the same flow (i.e., not floated or positioned). For example, the following HTML fragment and CSS:

<div><p>An example of the first line of text being within a descendant element</p></div>

div:first-line { font-weight: bold; }

…would still result in a bold first line of text, because the paragraph’s text is the first formatted line of the div.

The :before and :after pseudo-elements

The :before and :after pseudo-elements are used to insert generated content before or after an element’s content. They can be treated as if they were extra HTML inline elements inserted just before and after the content of their associated element.

Generated content is specified using the content property which, in CSS 2.1, can only be used in conjunction with the :before and :after pseudo-elements. Furthermore, you must declare the content property in order to generate the :before and :after pseudo-elements.

The content property can take string, url(), attr(), counter() and counters() values. The url() value is used to insert an image. The attr() function returns as a string the value of the specified attribute for the associated element. The counter() and counters() functions can be used to display the value of any CSS counters.

For example, the following HTML fragment and CSS:

<a href="http://wikipedia.org">Wikipedia</a>

a:after { content: " (" attr(href) ")"; }

…would display the value of the href attribute after a link’s content, resulting in the following anchor text for the example above: Wikipedia (http://wikipedia.org). This can be a helpful way to display the destination of specific links in printed web documents.

Keep in mind that CSS is meant for adding presentation and not content. Therefore, the content property should be used with caution.

It’s also worth noting that the :first-letter and :first-line pseudo-elements apply to the first letter and first line of an element including any generated content inserted using the :before and :after pseudo-elements.

Browser support for pseudo-elements

The :first-letter and :first-line pseudo-elements were introduced in CSS1 and there is wide basic support for them. However, IE 6 and IE 7 have particularly buggy implementations; even modern browsers are not entirely consistent in the way that they handle the :first-line and :first-letter pseudo-elements (example bugs).

The :before and :after pseudo-elements were introduced in the CSS 2.1 specification and are fully implemented in Firefox 3.5+, IE 8+, Safari 3+, Google Chrome, and Opera. Modern versions of Firefox even support CSS transitions and animations applied to pseudo-elements. However, legacy browsers like IE 6 and IE 7 do not support the :before and :after pseudo-elements at all.

For more detailed information on pseudo-element browser support, browser bugs, and workarounds, have a look at Sitepoint’s reference and this article on IE 6/7 issues.

In most cases, the :before and :after pseudo-elements can be used as part of a ‘progressive enhancement’ approach to design and development, because IE 6 and IE 7 will simply ignore them altogether. Alternatively, Modernizr now includes a robust feature test for generated content, providing one way to specify fallbacks or enhancements depending on browser support. The important thing is to remember to check what happens in browsers where support is missing.

Alternative ways to use pseudo-elements

Let’s take a look at how the :before and :after pseudo-elements can be used as the basis for some interesting effects. Most of the time, this involves generating empty :before and :after pseudo-elements by declaring an empty string as the value of the content property. They can then be manipulated as if they were empty inline HTML elements, keeping your HTML clean and giving you full control of certain effects from within CSS style sheets.

Simple visual enhancements, like speech bubbles and folded corners, can even be created without the need for images. This relies on the fact that you can create simple shapes using CSS.

Several types of ‘CSS polygons’ can be created as a result of browsers rendering borders at an angle when they meet. This can be exploited to create triangles. For example, the following HTML fragment and CSS:

<div class="triangle"></div>

.triangle {
  width: 0;
  height: 0;
  border-width: 20px;
  border-style: solid;
  border-color: red transparent transparent;
}

…will create a downward pointing, red triangle. By varying the width, height, border-width, border-style, and border-color values you can produce different shapes and control their orientation and colour. For more information, be sure to read Jon Rogan’s summary of the technique.

The more advanced pseudo-element hacks use the extra background canvas afforded by each :before and :after pseudo-element. This can help you crop background images, control the opacity of background images, and ‘fake’ multiple backgrounds and borders in browsers without support for CSS3 multiple backgrounds (e.g., IE 8). Taken to ludicrous extremes, you can even build a whole CSS icon set. To start with, let’s look at some simple effects that can be created without images or presentational HTML.

Creating CSS speech bubbles

In this example, a quote is styled to look like a speech bubble, using CSS. This is done by creating a triangle using a pseudo-element, and then absolutely positioning it in the desired place. By adding position:relative to the CSS styles for the HTML element, you can absolutely position the :after pseudo-element relative to its associated element.

<div class="quote">[Quoted text]</div>

.quote {
  position: relative;
  width: 300px;
  padding: 15px 25px 20px;
  margin: 20px auto;
  font: italic 26px/1.4 Georgia, serif;
  color: #fff;
  background: #245991;
}

.quote:after {
  content: "";
  position: absolute;
  top: 100%;
  right: 25px;
  border-width: 30px 30px 0 0;
  border-style: solid;
  border-color: #245991 transparent;
}

There’s nothing stopping you from adding some CSS3 to further enhance the effect for capable browsers. This could be adding rounded corners to the box or applying a skew transform to the triangle itself. Fiddle with the code in this example.

Creating CSS ‘ribbons’

Using the same principle, you can create a CSS ribbon effect without images or extra HTML. This time the effect uses 2 pseudo-element triangles. The HTML fragment is still very simple.

<div class="container">
    <h1>Simple CSS ribbon</h1>
    <p>[other content]</p>
</div>

You then need to use negative margins to pull the h1 outwards so that it extends over the padding and beyond the boundaries of the container div. The HTML fragment above can be styled using the following CSS:

.container {
  width: 400px;
  padding: 20px;
  margin: 20px auto;
  background: #fff;
}

.container h1 {
  position: relative;
  padding: 10px 30px;
  margin: 0 -30px 20px;
  font-size: 20px;
  line-height: 24px;
  font-weight: bold;
  color: #fff;
  background: #87A800;
}

From here, you only need to add the pseudo-element triangles to create the ‘wrapping’ appearance associated with ribbons. The :before and :after pseudo-elements share many styles, so you can simplify the code by only overriding the styles that differ between the two. In this case, the triangle created with the :after pseudo-element must appear on the opposite side of the heading, and will be a mirror image of the other triangle. So you need to override the shared styles that control its position and orientation.

.container h1:before,
.container h1:after {
  content: "";
  position: absolute;
  top: 100%;
  left: 0;
  border-width: 0 10px 10px 0;
  border-style: solid;
  border-color: transparent #647D01;
}

/* override shared styles */
.container h1:after {
  left: auto;
  right: 0;
  border-width: 0 0 10px 10px;
}

Fiddle with the code in this example.

Creating CSS folded corners

The final example of this form of pseudo-element hack creates a simple CSS folded-corner effect. A pseudo-element’s border properties are set to produce two differently-coloured touching triangles. One triangle is a slightly darker or lighter shade of the box’s background colour. The other triangle matches the background colour of the box’s parent (e.g. white). The pseudo-element is then positioned in the top right corner of its associated element to complete the effect.

.note {
  position: relative;
  padding: 20px;
  margin: 2em 0;
  color: #fff;
  background: #97C02F;
}

.note:before {
  content: "";
  position: absolute;
  top: 0;
  right: 0;
  border-width: 0 16px 16px 0;
  border-style: solid;
  border-color: #658E15 #fff;
}

Varying the size of the borders will vary the size and angle of the folded-corner. Fiddle with the code in this example.

Pseudo background-crop

Although creating polygons with pseudo-elements can produce some popular effects without images, the possibilities are inherently limited. But this is only one type of :before and :after pseudo-element hack. Treated as extra background canvases, they can be used to fill some gaps in existing browser support for CSS features.

One of those features is the cropping of background images. In the future, it’s likely that you’ll be able to crop background images using fragment identifiers, as is proposed in the CSS Image Values Module Level 3 draft. But at the moment no browsers support the use of fragment identifiers with bitmap images. Until they do, you can make use of this CSS 2.1 hack to emulate background image cropping in modern browsers.

The principle behind a ‘pseudo background-crop‘ is to apply a background-image to a pseudo-element rather than directly to an element in the HTML document. One of the applications of this technique is to crop icons that are part of a sprite.

For example, a web app might allow users to ‘save’, ‘edit’, or ‘delete’ an item. The HTML involved might look something like this:

<ul class="actions">
  <li class="save"><a href="#">Save</a></li>
  <li class="edit"><a href="#">Edit</a></li>
  <li class="delete"><a href="#">Delete</a></li>
</ul>

To enhance the appearance of these ‘action’ links, it is common to see icons sitting alongside the anchor text. For argument’s sake, let’s say that the relevant icons are part of a sprite that is organised using a 16px × 16px grid.

The :before pseudo-element – with dimensions that match the sprite’s grid unit – can be used to crop and display each icon. The sprite is referenced as a background image and the background-position property is used to control the precise positioning of each icon to be shown.

.actions a:before {
  content: "";
  float: left;
  width: 16px;
  height: 16px;
  margin: 0 5px 0 0;
  background: url(sprite.png);
}

.save a:before { background-position: 0 0; }
.edit a:before { background-position: -16px 0; }
.delete a:before { background-position: -32px 0; }

Using pseudo-elements like this helps to avoid the need to either add liberal amounts of white space to sprites or use empty HTML elements to do the cropping. Fiddle with the code in this example.

Pseudo background-position

The CSS 2.1 specification limits the values of background-position to horizontal and vertical offsets from the top-left corner of an element. The CSS Backgrounds and Borders Module Level 3 working draft includes an improvement to the background-position property to allow offsets to be set from any side. However, Opera 11+ is currently the only browser to have implemented it.

But by using pseudo-elements, it’s possible to emulate positioning a background image from any side in any browser with adequate CSS 2.1 support –’pseudo background-position‘.

Once a pseudo-element is created, it must be absolutely positioned in front of the associated element’s background but behind its content, so as not to prevent users from being able to select text or click on links. This is done by setting a positive z-index on the element and a negative z-index on the pseudo-element.

#content {
  position: relative;
  z-index: 1;
}

#content:before {
  content: "";
  position: absolute;
  z-index: -1;
}

Now the pseudo-element can be sized and positioned to sit over any area within (or beyond) the element itself, without affecting its content. This is achieved by using any combination of values for the top, right, bottom, and left positional offsets, as well as the width, and height properties. It is the key to their flexibility.

In this example, a 200px × 300px background image is applied to the pseudo-element, which is also given dimensions that match those of the image. Since the pseudo-element is absolutely positioned, it can be offset from the bottom and right of the associated HTML element.

#content {
  position: relative;
  z-index: 1;
}

#content:before {
  content: "";
  position: absolute;
  z-index: -1;
  bottom: 10px;
  right: 10px;
  width: 200px;
  height: 300px;
  background: url(image.jpg);
}

Many other hacks and effects are possible using the :before and :after pseudo-elements, especially when combined with CSS3. Hopefully this introduction to pseudo-elements, and how they can be exploited, will have inspired you to experiment with them in your work.

The future of pseudo-elements

The way that pseudo-elements are used will continue to change as CSS does. Some new applications will emerge, and existing ones will fade away as browser implementation of ‘CSS3 modules’ continues to improve.

Generated content and pseudo-elements themselves are likely to undergo changes too. The CSS3 Generated and Replaced Content Module introduced a two-colon format for pseudo-elements (i.e., ::before) to help distinguish between pseudo-classes and pseudo-elements. But for compatibility with previous levels of CSS, pseudo-elements do not require two colons. Most modern browsers support both formats, but it is not supported by IE 8 and the single-colon format ensures greater backwards compatibility.

The proposed extensions to pseudo-elements included the addition of nested pseudo-elements (::before::before), multiple pseudo-elements (::after(2)), wrapping pseudo-elements (::outside), and the ability to insert pseudo-elements into later parts of the document (::alternate). However, the CSS3 Generated and Replaced Content Module is undergoing significant changes.

This article was originally published in .net magazine in April 2011

Related resources

• Interactive examples of the code throughout this article
• CSS generated content techniques
• Automatic numbering with CSS counters
• CSS image replacement using pseudo-elements
• Multiple backgrounds and borders with CSS 2.1
• CSS background image hacks
• A whole bunch of amazing stuff pseudo-elements can do

Taking a “mobile first” approach to web development poses some challenges if you need to provide a “desktop” experience for legacy versions of IE. Using a CSS pre-processor like Sass can help.

As of Sass 3.2, there is another way of catering for IE, described by Jake Archibald.

One aspect of a “mobile first” approach to development is that your styles are usually gradually built up from a simple base. Each new “layer” of CSS adds presentational adjustments and complexity, via CSS3 Media Queries, to react to and make use of additional viewport space. However, IE 6/7/8 do not support CSS3 Media Queries. If you want to serve IE 6/7/8 something more than just the base CSS, then you need a solution that exposes the “enhancing” CSS to those browsers.

Popular existing options

An existing option is the use of a CSS3 Media Query polyfill, such as Respond.js. However, there are some drawbacks to this approach (see the project README), such as the introduction of a JavaScript dependency and the XHRing of your style sheets, which may introduce performance or cross-domain security issues. Furthermore, adding support for CSS3 Media Queries is probably not necessary for these legacy browsers. The main concern is exposing the “enhancing” CSS.

Another method, which Jeremy Keith has described in his post on Windows mobile media queries, is to use separate CSS files: one basic global file, and an “enhancing” file that is referenced twice in the <head> of the document. The “enhancing” file is referenced once using a media attribute containing a CSS3 Media Query value. This prevents it being downloaded by browsers (such as IE 6/7/8) which do not support CSS3 Media Queries. The same file is then referenced again, this time wrapped in an IE conditional comment (without the use of a CSS3 Media Query value) to hide it from modern browsers. However, this approach becomes somewhat cumbersome, and introduces multiple HTTP requests, if you have multiple breakpoints in your responsive design.

Getting Sass to help

Sass 3.1 provides some features that help make this second approach more flexible. The general advantages of the Sass-based approach I’ve used are:

1. You have full control over how your style sheets are broken up and reassembled.
2. It removes the performance concerns of having to reference several separate style sheets for each breakpoint in the responsive design, simply to cater for IE 6/7/8.
3. You can easily repeat large chunks of CSS in separate compiled files without introducing maintenance problems.

The basic idea is to produce two versions of your compiled CSS from the same core code. One version of your CSS includes CSS3 @media queries and is downloaded by modern browsers. The other version is only downloaded by IE 6/7/8 in a desktop environment and contains no CSS3 @media queries.

To do this, you take advantage of the fact that Sass can import and compile separate .scss/.sass files into a single CSS file. This allows you to keep the CSS rules used at any breakpoint completely separate from the @media query that you might want it to be a part of.

This is not a CSS3 Media Query polyfill, so one assumption is that IE 6/7/8 users will predominantly be using mid-size screens and should receive styles appropriate to that environment. Therefore, in the example below, I am making a subjective judgement by including all the breakpoint styles up to a width of 960px but withholding those for any breakpoints beyond that.

The ie.scss file imports numerous other files, each containing a layer of CSS that builds upon the previous each layer of CSS. No CSS3 @media queries are contained within the files or the ie.scss file. It then compiles to a single CSS file that is designed to be served only to IE 6/7/8.

// ie.scss

@import "base";
@import "320-up";
@import "480-up";
@import "780-up";
@import "960-up";

The style.scss file imports the code for each breakpoint involved in the design (including any beyond the limit imposed for legacy versions of IE) but nests them within the relevant CSS3 @media query. The compiled version of this file is served to all browsers apart from IE 6/7/8 and IEMobile.

// style.scss

@import "base";
@media (min-width:320px) {
    @import "320-up"; }
@media (min-width:480px) {
    @import "480-up"; }
@media (min-width:780px) {
    @import "780-up"; }
@media (min-width:960px) {
    @import "960-up"; }
@media (min-width:1100px) {
    @import "1100-up"; }

The resulting CSS files can then be referenced in the HTML. It is important to hide the ie.css file from any IE-based mobile browsers. This ensures that they do not download the CSS meant for desktop versions of IE.

<!--[if (gt IE 8) | (IEMobile)]><!-->
<link rel="stylesheet" href="/css/style.css">
<!--<![endif]-->

<!--[if (lt IE 9) & (!IEMobile)]>
<link rel="stylesheet" href="/css/ie.css">
<![endif]-->

This Sass-enabled approach works just as well if you need to serve a basic style sheet for mobiles without CSS3 Media Query support, and prevent those devices from downloading the CSS used to adapt the layout to wider viewports. For example, you can avoid importing base.scss into the ie.scss and style.scss files. It can then be referenced separately in the HTML.

<link rel="stylesheet" href="/css/base.css">
<link rel="stylesheet" href="/css/style.css" media="(min-width:320px)">

<!--[if (lt IE 9) & (!IEMobile)]>
<link rel="stylesheet" href="/css/ie.css">
<![endif]-->

You’ll notice that I didn’t wrap the style.css reference in a conditional comment to hide it from legacy versions of IE. It’s not necessary this time because the value of the media attribute is not understood by legacy versions of IE, and the style sheet will not be downloaded.

In different circumstances, different combinations of style sheets and media attribute values will be more appropriate.

Summary

Even if you want to don’t want to use any of the Sass or SCSS syntax, the pre-processor itself can help you to write your CSS in a “mobile first” manner (with multiple breakpoints), provide a “desktop” experience for IE 6/7/8, and avoid some of the performance or maintenance concerns that are sometimes present when juggling the two requirements.

I’m relatively new to using Sass, so there may be even better ways to achieve the same result or even to prevent the inclusion of IE-specific CSS unless the file is being compiled into a style sheet that only IE will download.

Normalize.css is a small CSS file that provides better cross-browser consistency in the default styling of HTML elements. It’s a modern, HTML5-ready, alternative to the traditional CSS reset.

• Normalize.css project site
• Normalize.css source on GitHub

Normalize.css is currently used in some form by Twitter Bootstrap, HTML5 Boilerplate, GOV.UK, Rdio, CSS Tricks, and many other frameworks, toolkits, and sites.

Overview

Normalize.css is an alternative to CSS resets. The project is the product of 100’s of hours of extensive research by @necolas and @jon_neal on the differences between default browser styles.

The aims of normalize.css are as follows:

• Preserve useful browser defaults rather than erasing them.
• Normalize styles for a wide range of HTML elements.
• Correct bugs and common browser inconsistencies.
• Improve usability with subtle improvements.
• Explain the code using comments and detailed documentation.

It supports a wide range of browsers (including mobile browsers) and includes CSS that normalizes HTML5 elements, typography, lists, embedded content, forms, and tables.

Despite the project being based on the principle of normalization, it uses pragmatic defaults where they are preferable.

Normalize vs Reset

It’s worth understanding in greater detail how normalize.css differs from traditional CSS resets.

Normalize.css preserves useful defaults

Resets impose a homogenous visual style by flattening the default styles for almost all elements. In contrast, normalize.css retains many useful default browser styles. This means that you don’t have to redeclare styles for all the common typographic elements.

When an element has different default styles in different browsers, normalize.css aims to make those styles consistent and in line with modern standards when possible.

Normalize.css corrects common bugs

It fixes common desktop and mobile browser bugs that are out of scope for resets. This includes display settings for HTML5 elements, correcting font-size for preformatted text, SVG overflow in IE9, and many form-related bugs across browsers and operating systems.

For example, this is how normalize.css makes the new HTML5 search input type cross-browser consistent and stylable:

/**
 * 1. Addresses appearance set to searchfield in S5, Chrome
 * 2. Addresses box-sizing set to border-box in S5, Chrome (include -moz to future-proof)
 */

input[type="search"] {
  -webkit-appearance: textfield; /* 1 */
  -moz-box-sizing: content-box;
  -webkit-box-sizing: content-box; /* 2 */
  box-sizing: content-box;
}

/**
 * Removes inner padding and search cancel button in S5, Chrome on OS X
 */

input[type="search"]::-webkit-search-decoration,
input[type="search"]::-webkit-search-cancel-button {
  -webkit-appearance: none;
}

Resets often fail to bring browsers to a level starting point with regards to how an element is rendered. This is particularly true of forms – an area where normalize.css can provide some significant assistance.

Normalize.css doesn’t clutter your debugging tools

A common irritation when using resets is the large inheritance chain that is displayed in browser CSS debugging tools.

This is not such an issue with normalize.css because of the targeted styles and the conservative use of multiple selectors in rulesets.

Normalize.css is modular

The project is broken down into relatively independent sections, making it easy for you to see exactly which elements need specific styles. Furthermore, it gives you the potential to remove sections (e.g., the form normalizations) if you know they will never be needed by your website.

Normalize.css has extensive documentation

The normalize.css code is based on detailed cross-browser research and methodical testing. The file is heavily documented inline and further expanded upon in the GitHub Wiki. This means that you can find out what each line of code is doing, why it was included, what the differences are between browsers, and more easily run your own tests.

The project aims to help educate people on how browsers render elements by default, and make it easier for them to be involved in submitting improvements.

How to use normalize.css

First, install or download normalize.css from GitHub. There are then 2 main ways to make use of it.

Approach 1: use normalize.css as a starting point for your own project’s base CSS, customising the values to match the design’s requirements.

Approach 2: include normalize.css untouched and build upon it, overriding the defaults later in your CSS if necessary.

Closing comments

Normalize.css is significantly different in scope and execution to CSS resets. It’s worth trying it out to see if it fits with your development approach and preferences.

The project is developed in the open on GitHub. Anyone can report issues and submit patches. The full history of the project is available for anyone to see, and the context and reasoning for all changes can be found in the commit messages and the issue threads.

Related reading

Detailed information on default UA styles: WHATWG suggestions for rendering HTML documents, Internet Explorer User Agent Style Sheets,and CSS2.1 User Agent Style Sheet Defaults.

Translations

• Про normalize.css
• About normalize.css (Italiano)
• 关于Normalize.css

What is the cascade?

The cascade is a mechanism for determining which styles should be applied to a given element, based on the rules that have cascaded down from various sources.

The cascade takes importance, origin, specificity, and source order of style rules into account. It assigns a weight to each rule. When multiple rules apply to a given element, the rule with the greatest weight takes precedence. The result is an unambiguous way to determine the value of a given element/property combination.

Browsers apply the following sorting logic:

• Find all declarations that apply to a given element/property combination, for the target media type.

• Sort declarations according to their importance (normal or important) and origin (author, user, or user agent). From highest to lowest precedence:

  1. user !important declarations
     
  2. author !important declarations
     
  3. author normal declarations
     
  4. user normal declarations
     
  5. user agent declarations

• If declarations have the same importance and source, sort them by selector specificity.

• Finally, if declarations have the same importance, source, and specificity, sort them by the order they are specified in the CSS. The last declaration wins.

What is specificity?

Specificity is a method of conflict resolution within the cascade.

Specificity is calculated in a very particular way, based on the values of 4 distinct categories. For explanatory purposes, the CSS2 spec represents these categories using the letters a, b, c, and d. Each has a value of 0 by default.

• a is equal to 1 if the declaration comes from a style attribute in the HTML (“inline styles”) rather than a CSS rule with a selector.
• b is equal to the number of ID attributes in a selector.
• c is equal to the number of other attributes and pseudo-classes in a selector.
• d is equal to the number of elements and pseudo-elements in a selector.

The specificity is given by concatenating all 4 resulting numbers. More specific selectors take precedence over less specific ones.

For example, the selector #id .class[href] element:hover contains:

• 1 ID (b is 1)
• 1 class, 1 attribute selector, and 1 pseudo-class (c is 3)
• 1 element (d is 1)

Therefore, it has a specificity of 0,1,3,1. Note that a selector containing a single ID (0,1,0,0) will have a higher specificity than one containing any number of other attributes or elements (e.g., 0,0,10,20). This is one of the reasons why many modern CSS architectural patterns avoid using IDs for styling purposes.

What is inheritance?

Inheritance is distinct from the cascade and involves the DOM tree.

Inheritance is the process by which elements inherit the the values of properties from their ancestors in the DOM tree. Some properties, e.g. color, are automatically inherited by the children of the element to which they are applied. Each property defines whether it will be automatically inherited.

The inherit value can be set for any property and will force a given element to inherit its parent element’s property value, even if the property is not normally inherited.

About !important

The above should make it apparent that !important is a separate concept to specificity. It has no effect on the specificity of a rule’s selector.

An !important declaration has a greater precedence than a normal declaration (see the previously mentioned cascade sorting logic), even declarations contained in an element’s style attribute.

[CSS terminology reference]

Translations

• CSS: каскад, специфика и наследование

A new image replacement technique was recently added to the HTML5 Boilerplate project. This post explains how it works and how it compares to alternative image replacement techniques.

[15 December 2012] This technique is no longer used in HTML5 Boilerplate. It’s been replaced by another, more reliable approach.

Here’s the CSS behind the recent update to the image replacement helper class in HTML5 Boilerplate. It has also made its way into the Compass framework.

.ir {
  font: 0/0 a;
  text-shadow: none;
  color: transparent;
}

What does each declaration do?

• font:0/0 a – a shorthand property that zeros out the font size and line-height. The a value acts as a very short font-family (an idea taken from the BEM implementation of this method). The CSS validator complains that using 0/0 in the shorthand font property is not valid, but every browser accepts it and this appears to be an error in the validator. Using font:0px/0 a passes validation but it displayed as font:0/0 a in the code that the validator flags as valid.
• text-shadow:none – makes sure that any inherited text shadow is removed for the text. This prevents the chance of any text shadow colors showing over the background.
• color:transparent – needed for browsers than don’t completely crush the text to the point of being invisible. Safari 4 (extremely rare) is an example of such a browser. There may also be mobile browsers than require this declaration. IE6/7/8 don’t recognise this value for color, but fortunately IE7/8 don’t show any trace of the text. IE6 shows a faint trace.

In the HTML5 Boilerplate image replacement helper, we’ve also removed any border and background-color that may be on the element. This makes it easier to use the helper class on elements like button or with links that may included background or border properties as part of a design decision.

Benefits over text-indent methods

The new technique avoids various problems with any text-indent method, including the one proposed by Scott Kellum to avoid iPad 1 performance problems related to large negative text indents.

• Works in IE6/7 on inline-block elements. Techniques based on text indentation are basically “broken”, as shown by this test case: http://jsfiddle.net/necolas/QZvYa/show/
• Doesn’t result in any offscreen box being created. The text-indent methods result in a box being drawn (sometimes offscreen) for any text that have been negatively or positively indented. It can sometimes cause performance problems but the font-based method sidesteps those concerns.
• No need to specify a text-alignment and hide the overflow since the text is crushed to take up no space.
• No need to hide br or make all fallback HTML display:inline to get around the constraints of using a text indentation. This method is not affected by those problems.
• Fewer styles are needed as a result of these improvements.

Drawbacks

No image replacement hack is perfect.

• Leaves a very small trace of the text in IE6.
• This approach means that you cannot use em units for margins on elements that make use of this image replacement code. This is because the font size is set to 0.
• Windows-Eyes has a bug that prevents the reading of text hidden using this method. There are no problems with all other screenreaders that have been tested. Thanks to @jkiss for providing these detailed results and to @wilto for confirming this technique works for JAWS 12 in IE 6/7/8 and Firefox 4/5/6.
• Like so many IR methods, it doesn’t work when CSS is loaded but images are not.
• Text may not be hidden if a visitor is using a user style sheet which has explicitly set important font-size declarations for the element type on which you have applied the IR class.

It’s worth noting that the NIR image replacement technique avoids these drawbacks, but lacks support in IE6/7.

Closing comments

I’ve been using this technique without significant problems for nearly a year, ever since Jonathan Neal and I used it in a clearfix experiment. The BEM framework also makes use of it for their icon components. The core idea was even proposed back in 2003 but the browser quirks of the day may have prevented wider use.

If you come across any problems with this technique, please report them at the HTML5 Boilerplate GitHub issue tracker and include a test case when appropriate.

Translations

• Nouvelle méthode de remplacement de texte par une image

A collection of thoughts, experiences, ideas that I like, and ideas that I have been experimenting with over the last year. It covers HTML semantics, components and approaches to front-end architecture, class naming patterns, and HTTP compression.

About semantics

Semantics is the study of the relationships between signs and symbols and what they represent. In linguistics, this is primarily the study of the meaning of signs (such as words, phrases, or sounds) in language. In the context of front-end web development, semantics are largely concerned with the agreed meaning of HTML elements, attributes, and attribute values (including extensions like Microdata). These agreed semantics, which are usually formalised in specifications, can be used to help programmes (and subsequently humans) better understand aspects of the information on a website. However, even after formalisation, the semantics of elements, attributes, and attribute values are subject to adaptation and co-option by developers. This can lead to subsequent modifications of the formally agreed semantics (and is an HTML design principle).

Distinguishing between different types of HTML semantics

The principle of writing “semantic HTML” is one of the foundations of modern, professional front-end development. Most semantics are related to aspects of the nature of the existing or expected content (e.g. h1 element, lang attribute, email value of the type attribute, Microdata).

However, not all semantics need to be content-derived. Class names cannot be “unsemantic”. Whatever names are being used: they have meaning, they have purpose. Class name semantics can be different to those of HTML elements. We can leverage the agreed “global” semantics of HTML elements, certain HTML attributes, Microdata, etc., without confusing their purpose with those of the “local” website/application-specific semantics that are usually contained in the values of attributes like the class attribute.

Despite the HTML5 specification section on classes repeating the assumed “best practice” that…

…authors are encouraged to use [class attribute] values that describe the nature of the content, rather than values that describe the desired presentation of the content.

…there is no inherent reason to do this. In fact, it’s often a hindrance when working on large websites or applications.

• Content-layer semantics are already served by HTML elements and other attributes.
• Class names impart little or no useful semantic information to machines or human visitors unless it is part of a small set of agreed upon (and machine readable) names – Microformats.
• The primary purpose of a class name is to be a hook for CSS and JavaScript. If you don’t need to add presentation and behaviour to your web documents, then you probably don’t need classes in your HTML.
• Class names should communicate useful information to developers. It’s helpful to understand what a specific class name is going to do when you read a DOM snippet, especially in multi-developer teams where front-enders won’t be the only people working with HTML components.

Take this very simple example:

<div class="news">
    <h2>News</h2>
    [news content]
</div>

The class name news doesn’t tell you anything that is not already obvious from the content. It gives you no information about the architectural structure of the component, and it cannot be used with content that isn’t “news”. Tying your class name semantics tightly to the nature of the content has already reduced the ability of your architecture to scale or be easily put to use by other developers.

Content-independent class names

An alternative is to derive class name semantics from repeating structural and functional patterns in a design. The most reusable components are those with class names that are independent of the content.

We shouldn’t be afraid of making the connections between layers clear and explicit rather than having class names rigidly reflect specific content. Doing this doesn’t make classes “unsemantic”, it just means that their semantics are not derived from the content. We shouldn’t be afraid to include additional HTML elements if they help create more robust, flexible, and reusable components. Doing so does not make the HTML “unsemantic”, it just means that you use elements beyond the bare minimum needed to markup the content.

Front-end architecture

The aim of a component/template/object-oriented architecture is to be able to develop a limited number of reusable components that can contain a range of different content types. The important thing for class name semantics in non-trivial applications is that they be driven by pragmatism and best serve their primary purpose – providing meaningful, flexible, and reusable presentational/behavioural hooks for developers to use.

Reusable and combinable components

Scalable HTML/CSS must, by and large, rely on classes within the HTML to allow for the creation of reusable components. A flexible and reusable component is one which neither relies on existing within a certain part of the DOM tree, nor requires the use of specific element types. It should be able to adapt to different containers and be easily themed. If necessary, extra HTML elements (beyond those needed just to markup the content) and can be used to make the component more robust. A good example is what Nicole Sullivan calls the media object.

Components that can be easily combined benefit from the avoidance of type selectors in favour of classes. The following example prevents the easy combination of the btn component with the uilist component. The problems are that the specificity of .btn is less than that of .uilist a (which will override any shared properties), and the uilist component requires anchors as child nodes.

.btn { /* styles */ }
.uilist { /* styles */ }
.uilist a { /* styles */ }

<nav class="uilist">
    <a href="#">Home</a>
    <a href="#">About</a>
    <a class="btn" href="#">Login</a>
</nav>

An approach that improves the ease with which you can combine other components with uilist is to use classes to style the child DOM elements. Although this helps to reduce the specificity of the rule, the main benefit is that it gives you the option to apply the structural styles to any type of child node.

.btn { /* styles */ }
.uilist { /* styles */ }
.uilist-item { /* styles */ }

<nav class="uilist">
    <a class="uilist-item" href="#">Home</a>
    <a class="uilist-item" href="#">About</a>
    <span class="uilist-item">
        <a class="btn" href="#">Login</a>
    </span>
</nav>

JavaScript-specific classes

Using some form of JavaScript-specific classes can help to reduce the risk that thematic or structural changes to components will break any JavaScript that is also applied. An approach that I’ve found helpful is to use certain classes only for JavaScript hooks – js-* – and not to hang any presentation off them.

<a href="/login" class="btn btn-primary js-login"></a>

This way, you can reduce the chance that changing the structure or theme of components will inadvertently affect any required JavaScript behaviour and complex functionality.

Component modifiers

Components often have variants with slightly different presentations from the base component, e.g., a different coloured background or border. There are two mains patterns used to create these component variants. I’m going to call them the “single-class” and “multi-class” patterns.

The “single-class” pattern

.btn, .btn-primary { /* button template styles */ }
.btn-primary { /* styles specific to save button */ }

<button class="btn">Default</button>
<button class="btn-primary">Login</button>

The “multi-class” pattern

.btn { /* button template styles */ }
.btn-primary { /* styles specific to primary button */ }

<button class="btn">Default</button>
<button class="btn btn-primary">Login</button>

If you use a pre-processor, you might use Sass’s @extend functionality to reduce some of the maintenance work involved in using the “single-class” pattern. However, even with the help of a pre-processor, my preference is to use the “multi-class” pattern and add modifier classes in the HTML.

I’ve found it to be a more scalable pattern. For example, take the base btn component and add a further 5 types of button and 3 additional sizes. Using a “multi-class” pattern you end up with 9 classes that can be mixed-and-matched. Using a “single-class” pattern you end up with 24 classes.

It is also easier to make contextual tweaks to a component, if absolutely necessary. You might want to make small adjustments to any btn that appears within another component.

/* "multi-class" adjustment */
.thing .btn { /* adjustments */ }

/* "single-class" adjustment */
.thing .btn,
.thing .btn-primary,
.thing .btn-danger,
.thing .btn-etc { /* adjustments */ }

A “multi-class” pattern means you only need a single intra-component selector to target any type of btn-styled element within the component. A “single-class” pattern would mean that you may have to account for any possible button type, and adjust the selector whenever a new button variant is created.

Structured class names

When creating components – and “themes” that build upon them – some classes are used as component boundaries, some are used as component modifiers, and others are used to associate a collection of DOM nodes into a larger abstract presentational component.

It’s hard to deduce the relationship between btn (component), btn-primary (modifier), btn-group (component), and btn-group-item (component sub-object) because the names don’t clearly surface the purpose of the class. There is no consistent pattern.

In early 2011, I started experimenting with naming patterns that help me to more quickly understand the presentational relationship between nodes in a DOM snippet, rather than trying to piece together the site’s architecture by switching back-and-forth between HTML, CSS, and JS files. The notation in the gist is primarily influenced by the BEM system‘s approach to naming, but adapted into a form that I found easier to scan.

Since I first wrote this post, several other teams and frameworks have adopted this approach. MontageJS modified the notation into a different style, which I prefer and currently use in the SUIT framework:

/* Utility */
.u-utilityName {}

/* Component */
.ComponentName {}

/* Component modifier */
.ComponentName--modifierName {}

/* Component descendant */
.ComponentName-descendant {}

/* Component descendant modifier */
.ComponentName-descendant--modifierName {}

/* Component state (scoped to component) */
.ComponentName.is-stateOfComponent {}

This is merely a naming pattern that I’m finding helpful at the moment. It could take any form. But the benefit lies in removing the ambiguity of class names that rely only on (single) hyphens, or underscores, or camel case.

A note on raw file size and HTTP compression

Related to any discussion about modular/scalable CSS is a concern about file size and “bloat”. Nicole Sullivan’s talks often mention the file size savings (as well as maintenance improvements) that companies like Facebook experienced when adopting this kind of approach. Further to that, I thought I’d share my anecdotes about the effects of HTTP compression on pre-processor output and the extensive use of HTML classes.

When Twitter Bootstrap first came out, I rewrote the compiled CSS to better reflect how I would author it by hand and to compare the file sizes. After minifying both files, the hand-crafted CSS was about 10% smaller than the pre-processor output. But when both files were also gzipped, the pre-processor output was about 5% smaller than the hand-crafted CSS.

This highlights how important it is to compare the size of files after HTTP compression, because minified file sizes do not tell the whole story. It suggests that experienced CSS developers using pre-processors don’t need to be overly concerned about a certain degree of repetition in the compiled CSS because it can lend itself well to smaller file sizes after HTTP compression. The benefits of more maintainable “CSS” code via pre-processors should trump concerns about the aesthetics or size of the raw and minified output CSS.

In another experiment, I removed every class attribute from a 60KB HTML file pulled from a live site (already made up of many reusable components). Doing this reduced the file size to 25KB. When the original and stripped files were gzipped, their sizes were 7.6KB and 6KB respectively – a difference of 1.6KB. The actual file size consequences of liberal class use are rarely going to be worth stressing over.

How I learned to stop worrying…

The experience of many skilled developers, over many years, has led to a shift in how large-scale website and applications are developed. Despite this, for individuals weaned on an ideology where “semantic HTML” means using content-derived class names (and even then, only as a last resort), it usually requires you to work on a large application before you can become acutely aware of the impractical nature of that approach. You have to be prepared to disgard old ideas, look at alternatives, and even revisit ways that you may have previously dismissed.

Once you start writing non-trivial websites and applications that you and others must not only maintain but actively iterate upon, you quickly realise that despite your best efforts, your code starts to get harder and harder to maintain. It’s well worth taking the time to explore the work of some people who have proposed their own approaches to tackling these problems: Nicole’s blog and Object Oriented CSS project, Jonathan Snook’s Scalable Modular Architecture CSS, and the Block Element Modifier method that Yandex have developed.

When you choose to author HTML and CSS in a way that seeks to reduce the amount of time you spend writing and editing CSS, it involves accepting that you must instead spend more time changing HTML classes on elements if you want to change their styles. This turns out to be fairly practical, both for front-end and back-end developers – anyone can rearrange pre-built “lego blocks”; it turns out that no one can perform CSS-alchemy.

I recently moved from London to San Francisco to work at Twitter, as a Software Engineer. This is a rough guide – in the spirit of @chanian’s tutorial for Canadians – based on my experience of relocating, the mistakes I made along the way, and some information I wish I’d had. Use it at your own risk – don’t assume any legal truths; research things for yourself before making decisions!

I’m not going to cover anything about the US visa process. The company that has offered you employment in the US is likely to work with immigration lawyers who will handle (or guide you through) the visa application and processing. I’m also going to assume that your employer is providing temporary accommodation or that you are organising your own (e.g., via Airbnb) while you search for an apartment. Most of this article relates to things you will need to do once you arrive in San Francisco and soon after, but that you should spend some time thinking about beforehand.

Get a phone

You’ll need a US mobile/cell number pretty quickly, especially if you’re apartment-hunting.

The US telecom market isn’t great and will leave you nostalgic for the halcyon days of the EU-regulated, pro-consumer market you’ve left behind. For example, it’s now illegal to unlock a phone from a carrier unless you have that carrier’s permission to do so. Furthermore, if you do get a phone from a carrier (as part of your contract deal), you should be aware of whether or not you will be locked into a proprietary network, like Verison’s CDMA. Without a US credit history, you should expect to pay a sizable deposit when entering into a contract.

One way to reduce the cost of a phone contract is to bring your own phone to the party. If you bring a phone from the UK, make sure to check that your charger will work on US voltage. With an unlocked, GSM-supporting phone you can look to carriers like T-Mobile who offer various “value” and no-annual-contract plans. These prices are significantly cheaper because they don’t subsidise the purchase of a new phone. You’re likely to find “unlimited” data plans easier to come by than they are in the UK.

You’re shit-out-of-luck if you’re thinking you’d prefer a European-style pay-as-you-go (PAYG) approach. The options are thin on the ground. Any airtime you buy means just that – any time you spend talking or texting – so you pay to send and receive calls or SMS’s. My experience suggests that some networks recycle phone numbers or sell on your details. I still receive random texts addressed to previous owners of my phone number, and get messages from marketing companies who have miraculously acquired my personal details, an irritation that is compounded by the fact that it costs you money to be harassed.

If you’re determined to go the PAYG route, the nearest US equivalent is probably AT&T’s GoPhone SIM or Net10. You’ll have to purchase a phone and credit up front; top ups can be purchased in store, at some supermarkets, or done over the phone. This may also be the first time you encounter the US concept of a “restocking fee” – a method of dissuading you from returning items by charging you to do so. The restocking fee for the burner phone I first purchased was almost as much as the phone itself.

Open a bank account, transfer money

Make this a top priority. You should open a bank account as soon as you arrive in the US, especially as some banks will initially let you do so without a Social Security Number or permanent address.

Until you open a US bank account, you’ll be haemorrhaging money on fees levied by your UK bank for dollar transactions, and subject to poor exchange rates.

Choose a bank

San Francisco has a large range of different bank brands to choose from, but you’re probably best sticking to the big name banks that have branches and ATMs throughout the city, such as Bank of America, Chase, or Wells Fargo. There are co-ops and niche services if that’s your thing. Be sure to do some preparatory research on which bank is best suited to your needs. It’s also worth checking if your bank in the UK has a reciprocal agreement with any bank operating in San Francisco; it may cut down the cost of moving your money. Friends recommended going with either Bank of America or Chase. I went with Bank of America, where the customer service was personal and friendly.

Banking fees are a matter of course in the US. In contrast to the UK, you’ll almost certainly be charged for withdrawing money from any ATMs that aren’t owned by your bank. You have to buy cheque books (“check” in American English) and pay a fee to transfer your money to accounts outside your bank. Accounts usually involve a monthly fee, although this is waived in certain situations, such as setting up your salary to be directly deposited. Expect to set up a current (“checking”) and savings account, and to be asked to make a minimum cash deposit to complete the process (at Bank of America it was $100).

Once you’re all set up, your debit card will be sent in the post – so make sure you’ll be at that address for at least another week. In the meantime you may get a temporary cash card to get at what you’ve already deposited. Even if you transfer more money in, your bank can limit the amount you can withdraw within the first 30 days of the account being open – presumably to combat fraud/laundering.

Transfer money

It’s essential that you transfer money from your UK bank as soon as possible. There are many factors to consider when calculating how much money you want to transfer.

• You may enter the US up to 10 days before your visa is valid and you can start work.
• You need money for food, transport, going out, a phone (and deposit), apartment applications, an apartment deposit, buying furniture, etc.
• You might not be able to get paid until you have a Social Security Number.
• You’re unlikely to get paid until the middle or end of the month you start working.
• You’re very likely to get your first pay cheque given to you as a real cheque; your bank is then likely to withhold the vast majority of the cheque’s value for up to 28 days.
• It will cost you several thousand dollars – a deposit and at least one month of rent – to secure an apartment. In general, landlords will not accept a UK banking cheque.
• You’ll have to buy furniture and general household items if you aren’t shipping any from the UK.

All in all, this means you may end up without any significant US-earned money in your account for 30-45 days while making some of the biggest expenses you’re likely to have made for a while.

Transferring money to a US bank account can be done online via wire transfer between banks. Unfortunately, my bank in the UK – Santander – didn’t allow online wire transfers so I had to look for alternatives. You may want to research this prior to leaving the UK!

The Post Office provide a simple, secure, and fee-free service, but a poorer exchange rate. Looking around, I came across Currencyfair – a peer-to-peer currency exchange service. They provide online quotes without the need to sign up, they were very prompt and helpful in their replies to questions I had, and the exchange rate was very good. Overall, I saved quite a bit of money and I’d rely on them in the future.

Get a Clipper card

The Clipper card is San Francisco’s equivalent of London’s Oyster card. Getting one will take some of the pain out of using the various modes of public transport in San Francisco. You can get a Clipper card online and I’d suggest setting up “Autoload” (you’ll need a bank account) to get the card for free and never worry about remembering to top up your credit. Alternatively, you can buy them on the high street from shops like Walgreens.

Get a Social Security Number

Social Security recommend that you only apply for a Social Security Number once you’ve been in the US over 10 days.

My experience was that the process is quick and simple. You complete a short SSN application form ahead of time and take it to the nearest Social Security office along with the documentation they advise you to bring. Arrive first thing in the morning to avoid any wait. It can take a few weeks for your Social Security card to arrive so you may want to have it sent to your employer’s address if you don’t have a permanent address yet.

Once you have your Social Security Card, you should keep it safe and be judicious in giving your SSN out. However, you should provide it to your bank and employer as soon as possible.

Find somewhere to live

Living in the city of San Francisco is just one of the (more expensive) options available to you. I chose to live in the city but many of my friends and colleagues live in other areas, like the East Bay. Have a look around before making up your mind.

Rent is very expensive in San Francisco, even compared to prices in London, especially since it’s very rare to find furnished accommodation. It also appears to be rising at a staggering rate. However, buildings constructed before June 1979 are covered by San Francisco Rent Control which heavily constrains the rate at which your rent can increase once you become a tenant. Therefore, it’s worth taking the time to find somewhere that you could imagine living for a few years.

The rental market is extremely competitive. Many places rely on one-off, brief, herd-style viewings where you’re in the apartment with half a dozen other desperate people at the same time, and more arriving every minute. People hand over all their paperwork and a cash application fee (if applicable) there and then.

Things are made slightly harder because you’re unlikely to have any US credit history, which is something quite important over here. But an offer letter and salary details from a tech company seems to put you in good shape. It’s in your best interest to put together a dossier of papers to provide alongside any application you make. You should include scans of your employer’s offer letter, your visa, and ideally character references from a previous landlord, etc. Print out several copies to take with you to viewings. You might have to pay $30-$40 to make an application (which is meant to cover credit history checks), but I never did.

I found that using Craigslist or a listing aggregator like Lovely was the best way to find apartments for rent in the city. They will also help you to narrow your focus to the neighbourhoods that you’re most interested in (spend some time learning about the city). Before moving to San Francisco, I heard a lot of stories about how it was essential – if you are to have any hope – to be “first” to make contact with the poster of a listing, but my experience was that you’re generally given the date and time of a mass-viewing to attend. This means that making a good impression in person, and having a bit of a chat with your potential landlord or building-manager, is likely to improve your chances and help you make a decision. Be prepared for it to take a while to find an apartment – it took me over a month of searching.

Once you’ve found a place to rent and signed all the paperwork, call PG&E to create an account to pay for your heat and electricity. You can set up e-bills and automatic payments online once your account has been processed. It’s a good idea to sort out an ISP before you move in – I went with Sonic.net. Again, the monthly cost (which I was told includes 17 different taxes and “renting” of the router) is a little higher than you’d expect in the UK, and you can expect to pay an installation fee. Other things to do: get Renters Insurance and have your bank automatically mail out your monthly-rent check to your landlord or building manager. All these things are quick and easy to do.

If you’re interested in your renters rights, you can search the California Department of Consumer Affairs for information.

Buying stuff for your place

You’re going to need furniture and basic household items. There’s always Ikea, which is located in Emeryville across the bay. If you have any previous Ikea experience, you’ll know that it’s one of the most stressful shopping experiences imaginable. The Ikea in Emeryville is even worse but the prices are pretty good. You can get there by bus from San Francisco and have large items delivered, or sort out your own transport.

Other stores to look at include West Elm and Crate & Barrel; they sell nicer things but are significantly more expensive. Alternatively, there are a lot of independent and second-hand furniture shops in San Francisco, particularly in the Mission district and a few along Van Ness. They’re well worth checking out. Van Ness also has 3 or 4 stores that sell mattresses – Sleep Train came particularly well recommended. I’d suggest that you leverage the lower costs of similar mattresses online in order to significantly reduce the price of your purchase, while benefiting from the great service, free delivery, and returns policy of the high-street stores. And if you have no idea what you’re doing: home decor tips, infographics, and cheat sheets

Get a California I.D.

Once you have your SSN and have found a permanent address, you should apply for a California I.D. at the DMV. This is handy if you don’t want to carry your passport (with visa) around and don’t have alternative I.D., such as a driver’s licence. You should register for an appointment to avoid a long wait in line. It can take up to 60 days for your California I.D. to arrive.

Get a credit card

The U.S. revolves around consumer credit. You need to start building up a credit history as soon as possible if you want to avoid paying large deposits or higher prices. Ask your bank about the soonest that you can apply for a credit card and then start using it – buying on credit even if you don’t need to.

Inform HMRC and the Student Loans Company

Once you’re settled, you should make time to inform HMRC that you’ve left the UK. They’ll be able to assess your tax status. If you are repaying student loans, after 3 months in the US you’re expected to contact the Student Loans Company by completing an overseas income assessment form. They will then work out your repayments.

Welcome to the United States of America

Hopefully you settle in within a couple of months and get to know San Francisco. There are many faces to this city, but the social scene is pretty diverse and there are many restaurants, bars, cafes, parks, and attractions – plenty of places to explore and things to do while you find your feet.