Hi,all

  I want to remove some Tests form adexl automatically,there have any function to achieve that?

Hi,

My query is regarding importing of layout.

After importing, we see that the imported transistor instances and vias are all referring to the library in which they are imported, instead of referring to the technology library.

Please let me know how we can refer them to the technology library.

Will surely provide more details if my query is unclear.

Thanks,

Mallikarjun.

Hello,

I would like to create a button for my form that prompts the user to click on a cellview and draw a rectangle bounding box, exactly like the one used in the Area and Density Calculator. Can someone please help me with this?

Thanks!

Beto

Hello Community,

I have encountered an issue that is a mystery to me and hope somebody could give me a clue about what is happening in Cadence and maybe even a solution?

I am running a test scripted in a SKILL file that sequentially opens two different projects with MC analyses and in between I get an error message box and also multiple logs in CIW with exactly the same text.

Both projects run a simulation with a call like this:

historyName = maeRunSimulation(?session sessionName ?waitUntilDone t)

After this the script closes the current project, opens the next project and executes the same line with maeRunSimulation() for the second project. Then immediately this error message happens, and also is logged repeatedly in the CIW window

The message box looks like this:

The logs I get in CIW:

nil
hiCancelProgressBox(_axlNetlistCreateProgressBar)
nil
hiCancelProgressBox(_axlUILoadForm)
nil
when(dwindow('axlDataViewessWindow1) hiMapWindow(dwindow('axlDataViewessWindow1)))
t
when(dwindow('axlRunSummaryessWindow1) hiMapWindow(dwindow('axlRunSummaryessWindow1)))
t
ERROR (ASSEMBLER-1600): Cannot find an active session named fnxSession0.
You can only modify an ADE Assembler session that is active.
Perhaps the session name was misspelled or has not yet been created.
Verify the session name matches an existing ADE Assembler session.

1>
ERROR (ASSEMBLER-1600): Cannot find an active session named fnxSession0.
You can only modify an ADE Assembler session that is active.
Perhaps the session name was misspelled or has not yet been created.
Verify the session name matches an existing ADE Assembler session.

*WARNING* hiDisplayAppDBox: modal dbox 'adexlMessageDialog' is already displayed!
ERROR (ASSEMBLER-1600): Cannot find an active session named fnxSession0.
You can only modify an ADE Assembler session that is active.
Perhaps the session name was misspelled or has not yet been created.
Verify the session name matches an existing ADE Assembler session.

*WARNING* hiDisplayAppDBox: modal dbox 'adexlMessageDialog' is already displayed!
ERROR (ASSEMBLER-1600): Cannot find an active session named fnxSession0.
You can only modify an ADE Assembler session that is active.
Perhaps the session name was misspelled or has not yet been created.
Verify the session name matches an existing ADE Assembler session.

Hi,

I have a string "[@global_vddi:%:vddi!]" which I need to process to remove "@[]" chars. The desired result is "global_vddi:%:vddi!". I tried the following in CIW

netExpr = "[@global_vddi:%:vddi!]"
rexCompile("\([a-zA-Z0-9_:!%]+\)")
t
rexExecute(netExpr)
t
rexSubstitute( "\0" )
"global_vddi:%:vddi!"

and I achieved the desired value. I added the same code to my script but it didn't work. In my script rexExecute returns 't' but rexSubstitute returns 'nil' 

Here is the snippet from my script

netExpr = dbGetTermNetExpr(term)
if(netExpr then
rexCompile("\([a-zA-Z0-9_:!%]+\)")
rexExecute(netExpr)
netExpr1 = rexSubstitute( "\0" )

...

. ..)  and trace log showing the variable values as the code executes

stopped before evaluating dbGetTermNetExpr(term)
after evaluating dbGetTermNetExpr(term)==> "[@global_vddi:%:vddi!]"
after evaluating (netExpr = dbGetTermNetExpr(term))==> "[@global_vddi:%:vddi!]"
stopped before evaluating if(netExpr then rexCompile("\([a-zA-Z0-9_:!%]+\)") rexExecute(netExpr) (netExpr1 = rexSubstitute("\0")) ... )
stopped before evaluating rexCompile("\([a-zA-Z0-9_:!%]+\)")
after evaluating rexCompile("\([a-zA-Z0-9_:!%]+\)")==> t
stopped before evaluating rexExecute(netExpr)
after evaluating rexExecute(netExpr)==> t
stopped before evaluating (netExpr1 = rexSubstitute("\0"))
stopped before evaluating rexSubstitute("\0")
after evaluating rexSubstitute("\0")==> nil
|[2]netExpr1 set to nil, was nil

Any help or suggestions as to why the code executes differently in CIW and when called from a SKILL script file will be much appreciated.

I also tried a different approach using rexReplace instead of rexSubstitute but couldn't get the regex pattern correct. The code I tried in CIW using rexReplace is as follows

a = "[@global_vddi:%:vddi!]"
"[@global_vddi:%:vddi!]"
rexCompile("\([@\[\]]*\)")
t
rexReplace(a "" 0)
"global_vddi:%:vddi!]"

Only '@[' get replaced and ']' is still present. The regex pattern contains '\]' to match the closing square bracket yet it is not replaced. Please let me know what I'm missing in these 2 scenarios.

Any help is much appreciated!!

Regards,

Confused SKILL user 

Hi guys,

I see that inside VNC I can’t resize window boxes by mouse. While pressing the arrow at the box edge and dragging it nothing happens:

is it a bug, or setup change require?

Noted, it only happens when trying to resize window box from left and right side..

Thx

Hi All,

I'm using a code (abConvertPolygonToPath.ils) that I found in other posts to convert a rect object to a path object inside a pcell code, but when I try to run a DRC, the layout export fails due to a warning message, here is the log message

*WARNING* (DB-270001): Pcell evaluation for 18A_asaavedr/lay_mesh_BM0_BM4_3p6_3p6/layout has the following error(s):

*WARNING* (DB-270002): ("eval" 0 t nil ("*Error* eval: undefined function" abConvertPolygonToPath))

ERROR (XOASIS-231): Pcell evaluation failed for '18A_asaavedr/lay_mesh_BM0_BM4_3p6_3p6/layout' because the Pcell SKILL code contains either a syntax error or an unsupported XOasis function. Check the standard output or the Virtuoso log file for more information. Cadence recommends correcting the Pcell SKILL code to resolve the issue. However, to ignore these errors and continue the translation, you may use the 'ignorePcellEvalFail' option.

INFO (XOASIS-282): Translation Failed. '1' error(s) and '3' warning(s) found.

And when compile the code I get the following message:

*WARNING* defgeneric function already defined - abConvertPolygonToPath

I will aprreciate any help in how to waive this error, or fix it.

Thank you

Hi Team,

I am using the following command in my SKILL script to flatten the hierarchical layouts, it's working fine for all the instances and mosaics but not for techLib via's please help me with the command to use for flattening the techLib via.

dbFlattenInst( inst 2 nil)

dbFlattenInst( inst1 2 t t nil nil t t)

Regards,

MT.

Disappearing toolbar or docked menu

Is there a way for the toolbar or floating menu from disappearing when a cells tab is added to a window?

I have created a skill toolbar and it disappeared when I add another cell or tab to a window.

The only toolbars that stay are the ones I have defined in the Layout.toolbar file.

Do I have to add a trigger to keep the toolbars visible or not disappearing from the window?

Cadence version IC23.1-64b.ISR7.27

Paul

Hi,

I want to define a procedure that with @key, and I also want to restrict the variable's datatype, I tried with folloing but I received error in CIW

procedure(tt(handler @key str1 str2 "ssS")
  printf("handler: %L " handler)
)

tt('test)

The error is like: *Error* tt: argument for keyword ?str1 should be a symbol (type template = "ssS") at line 11 of file

Thanks,

James

Hello,

I was looking to destructively and efficiently modify a list that was passed in as an argument to a procedure, by prepending an item to the list.

I noticed that cons lets you do this efficiently, but the operation is non-destructive. Hence this wouldn't work if you are trying to modify a function's list parameter in place.

Here is an example of trying to add "0" to the front of a list:

Hi there

I am trying to make cross-probe btw layout and schematic view.

so when I execute the code in schematic using bindkey, the code will raise the layout view (hiRaiseWindow)

and then I want to descend to the same hierarchy as schematic. (geSelectFig, leHiEditInPlace)

But looks like current cellview still stays at schematic view.

I got this error msg, and when I print current cell view name at where I got this msg, it replys schematic.

*Error* geSelectFig: argument #1 should be a database object (type template = "d") - nil

is there any way to change the current cellview to layout view?

I also added this code, but didn't work.

geGetEditCellView(geGetCellViewWindow(cvId)) ;cvId is layout view

I don't want to close the schematic view, just want to move the focus or make geSelectFig works.

Thanks in advance.

Hello All:

I am looking for help on the following, as I am new to Cadence tools [I have to use Cadence Innovus for Physical Design after Logic Synthesis using Synopsys Design Compiler, using Nangate 45 nm Open Cell Library]: while using Cadence Innovus, I would need to select a few specific nets to be routed through a specific metal layer. How can I do this on Innovus [are there any command(s)]? Also, would writing and sourcing a .tcl script [containing the command(s)] on the Innovus terminal after the Placement Stage of Physical Design be fine for this?

Secondly, is there a way in Innovus to manipulate layout components, such as changing some pin placements, wire directions (say for example, wire direction changed to facing east from west, etc.) or moving specific closely placed cells around (without violating timing constraints of course) using any command(s)/.tcl script? If so, would pin placement changes and constraining some closely placed cells to be moved apart be done after Floorplanning/Powerplanning (that is, prior to Placement) and the wire direction changes be done after Routing? 

While making the necessary changes, could I use the usual Innovus commands to perform Physical Design of the remaining nets/wires/pins/cells, etc., or would anything need modification for the remaining components as well?

I would finally need to dump the entire design containing all of this in a .def file.

I tried looking up but could only find matter on Virtuoso and SKILL scripting, but I'd be using Innovus GUI/terminal with Nangate 45 nm Open Cell Library. I know this is a lot, but I would greatly appreciate your help. Thanks in advance.

Riya

Hi,

I have synthesized a verilog code. When performing the pnr in innovus it is showing the error "Instance g5891__718 (similar for other) of the cell AND2_X6 has no physical library or has wrong dimension  values (<=0). Check your design setup to make sure the physical library is loaded in and attribute specified in library are correct.

When importing synthesized netlist in virtuoso then it says " Module AND2_X6, instantiated in the top module decoder, is not defined. Therefore the top module decoder will be imported as functional."

Please help what's going on here? 

i want to read from text file two values  on two ports , i wrote  that  code, and i have that error that shown in the image below . and also the data in text file is shown as screenshot

module read_file (a,b);

electrical a,b;
integer in_file_0,data_value, valid, count0,int_value;

analog begin
@(initial_step) begin
in_file_0 = $fopen("/home/hh1667/ee610/my_library/read_file/data2.txt","r");

valid = $fscanf (in_file_0, "%b,%b" ,int_value,count0);
end

V(a) <+ int_value;
V(b) <+ count0;

end

endmodule

Hi Cadence, 

I use simvision 20.09-s007 but my computer screen resolution is very high. As a result, the texts are too small. 

In ~/.simvision/Xdefaults I changed that number to 16, from 12. But the signal names in the waveform traces don't reflect the change. 

Simvision*Font: -adobe-helvetica-medium-r-normal--16-*-*-*-*-*-*-*

Other .font changes seem to reflect on the simvision correctly, except the signal names. 

How do I fix that? I dont mind a single variable to change all the texts fonts to 16. 

Thank you!

PS: I found the answer with another post. I change Preference/Waveform/Display/Signal Height. 

I am scripting gds streamin using 'strmin', which works fine so far.

But, as it apparently doesn't have an option to specify where the cds.lib file is, I have to run it from the directory where the cds.lib file is, or I guess I could create a dummy one to source that one.

Is there a way to tell strmin where the cds.lib file is?

Dear all, 

I'm trying to perform an LVS check using Calibre between a layout that was generated by Innovus and the initial netlist generated by Genus. However, once I hit Run LVS on Calibre, it reports the following warnings and recommends to stop the process:

Source netlist references but does not define more than 10 subckts:
DFD1BWP7T
DFKCND1BWP7T
DFKCNQD1BWP7T
DFKSND1BWP7T
DFQD1BWP7T
IND2D0BWP7T
INR2D0BWP7T
INVD0BWP7T
INVD2P5BWP7T
IOA21D0BWP7T
... (and more)

If I proceed the LVS process it shows lots of errors as shown in the following image:

Why Genus doesn't include the definition of those sub circuits in the generated netlist? Is this related to Flat/Hierarchy netlisting? 

I have included my Genus scripts as well as the generated netlist in the attachments (and here - if attachment don't work).

Many thanks,

Anas

We are looking for suitable tools that could be used for RTL design, IP-XACT based  integration (third party IP) and RTL design verification ( SV / UVM based methodology).

Request to share details on the different Cadence tools that is most suitable for these activities.

This document resolved my first query,

Article (11638952) Title: How to output power and ground nets to GDS
URL: support.cadence.com/.../ArticleAttachmentPortal

but now I have 20 power and 20 ground

below is my code

------------------------------------------------
variable GND "vss1" "vss2" "vss3" ... "vss20"
variable VDD "vdd1" "vdd2" "vdd3" ... "vdd20"

select_net M1 GND -outputlayer GND_M1
select_net M2 GND -outputlayer GND_M2
...
select_net AP GND -outputlayer GND_AP

select_net M1 VDD -outputlayer VDD_M1
select_net M2 VDD -outputlayer VDD_M2
...
select_net AP VDD -outputlayer VDD_AP

rule GND{

copy GND_M1
copy GND_M2
...
copy GND_AP}

rule VDD{

copy VDD_M1
copy VDD_M2
...
copy VDD_AP}
------------------------------------------------

I want 20 GND and 20 VDD are separately to highlight,
like this

Can DRC command use for-loop(skill or Tcl) to split the rule?
or how can I do to split it? 
I don't really want to repeat the rule 40 times..haha😅 (use Pegasus 22.21)

Hi Cadence & forumers, 

I am running a conformal LEC with a flattened netlist against RTL. 

The run hang for 5 days at the "analyze abort" step which is automatically launched by the compare. 

The netlist is flattened at some levels so hierarchical flow which I tried didn't help much. The flattened/highly optimized netlist is from customer and the ultimate goal. How shall I proceed now? 

On the a side note, a test run with a hierarchical netlist from a simple DC "compile -map_effort medium" command finished after 1 day or so. 

Thank you! 

// Command: vpx compare -verbose -ABORT_Print -NONEQ_Print -TIMEstamp
// Starting multithreaded comparison ...
Comparing 241112 points in parallel.

// Multithreading Overhead: 38% Gates: 8501606/6168138
// Multithreaded processing completed.
================================================================================
Compared points PO DFF DLAT BBOX CUT Total
--------------------------------------------------------------------------------
Equivalent 1025 241638 30 75 21 242789
--------------------------------------------------------------------------------
Abort 0 124 0 0 0 124
================================================================================
Compare results of instance/output/pin equivalences and/or sequential merge
================================================================================
Compared points DFF Total
--------------------------------------------------------------------------------
Equivalent 204 204
================================================================================
// Warning: 512 DFFs/DLATs have 1 disabled clock port: skipped data cone comparison
// Resolving aborts by analyze abort...

I'm currently trying to explore the verilog simulation option in cadence.

One thing that comes to my mind that if there exists a way in cadence workflow to dump selected register/wire's waveform during the simulation. 

Are there any additional tools needed apart from xcelium, is there a tutorial or specific training course for this aspect. I glance through Xcelium Simulator Course Version 22.09, but it seems not having related context. 

I know in Synopsys's workflow, it can be realized using verdi & fsdb in the command line as follows:

if (inst.CTRL_STATE==STATE_START_TO_DUMP)

$fsdbDumpvars(0, inst_1.reg_0);

end

Thanks in advance!

I am not able to open 64bit version of simvision using the following :

simvision -64 -wav "path to wav"

This throws the error "  /lib64/libc.so.6: version `GLIBC_2.14' not found"

I am only able to open it without the -64 option.

As a result I am not able to use the source browser feature since the simulation was run in 64 bit mode.

Need suggestion on how to resolve this. Thanks.

Hi everyone, 

Is there any method to generate "Sheet" column for a pin report like table below? The column "Name.Pin" & "Signal" can be generated easily, but I have no idea to generate the column of "Sheet Name".

The software using here are Allegro Design Entry HDL, OrCAD Capture and Allegro PCB Editor. Can these 3 software generate "Sheet Name" data?

Thank you. 

Good morning,
I dug up an old project from 2005 and I should open the schematic to check some things.
This is the schematic of a XILINX XC95108-pq160 CPLD which the XILINX ISE 6.1 software then translated and compiled, to generate a JEDEC file to burn CPLD.

My problem is that I can't open schematics with the versions of Orcad Schematic Entry that I have.
Can anyone help me understand which version of Orcad Schematic Entry I need to install to see these files?

I shared the files on:
drive.google.com/.../view

Thank you very much

Hi, have two designs and would like to copy paste one area of circuit from the old design to the new design, best way/approach and guidance please..

Hi,

I find there is a similar question 10 years ago and the answer is out of date, so I come to ask again.

I have compiled 2 different blocks in 2 different paths, using basic xrun -f xxxx.f, generated 2 xcelium.d folder.

Then I have to compile another block based on these 2, how can I link these 2 generated libraries while compiling the 3rd one?

Thanks

Hello,

I am trying to load some of the signals of the design saved in the signals.svwf to the waveform windown via the tcl file, I am using the following commands but nothing works, Can you please help 

 -submit waveform loadsignals -using "Waveform 2" FB1.svwf but it gives me the below error

-submit waveform new -reuse -name Waveforms

I got "no simulation data for marker" for each A<B, A=B and A>B markers. Simulation output doesn't show these outputs but the inputs shown. How can I solve this error?

Below is showing my Master.v

********************************************************************************************************************************************************************************************************************

///////ALU
module ALU (
    input [31:0] A,B,
    input[3:0] alu_control,
    output reg [31:0] alu_result,
    output reg zero_flag
);
    always @(*)
    begin
        // Operating based on control input
        case(alu_control)

        4'b0001: alu_result = A+B;
        4'b0010: alu_result = A-B;
        4'b0011: alu_result = A*B;
        4'b0100: alu_result = A|B;
        4'b0101: alu_result = A&B;
        4'b0110: alu_result = A^B;
        4'b0111: alu_result = ~B;
        4'b1000: alu_result = A<<B;
        4'b1001: alu_result = A>>B;
        4'b1010: begin
            if(A<B)
            alu_result = 1;
            else
            alu_result = 0;
        end
        default: alu_result = A+B;

        endcase

        // Setting Zero_flag if ALU_result is zero
        if (alu_result)
            zero_flag = 1'b1;
        else
            zero_flag = 1'b0;   
    end
endmodule


/////CONTROL UNIT
/*
Control unit controls takes opcode, funct7, funct3 of the instruction code to determine
and control regwrite in IFU, alu control in ALU to execute proper instruction
*/
/*
Control unit controls takes opcode, funct7, funct3 of the instruction code to determine
and control regwrite in IFU, alu control in ALU to execute proper instruction
*/
module CONTROL(
    input [4:0] opcode,
    output reg [3:0] alu_control,
    output reg regwrite_control,memread_control,memwrite_control
);
    always @(opcode)
    begin
       case(opcode)
        5'b00001: begin alu_control=4'b0001;  //add
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        5'b00010: begin alu_control=4'b0010;  ///sub
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        5'b00011: begin alu_control=4'b0011;  //mul
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b00100: begin alu_control=4'b0100;  ///OR
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b00101: begin alu_control=4'b0101;  ///AND
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        5'b00110: begin alu_control=4'b0110;  ///XOR
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b00111: begin alu_control=4'b0111;  ///NOT
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b01000: begin alu_control=4'b1000;  //SL
        regwrite_control=1; memread_control=1; memwrite_control=0;
        end
        5'b11001: begin alu_control=4'b1001;  //SR
        regwrite_control=1; memread_control=1; memwrite_control=0;
        end
        5'b01010: begin alu_control=4'b1010;  //COMPARE
        regwrite_control=1; memread_control=1; memwrite_control=0;
        end
        //5'b11010: begin ALU_control=4'b0000;  //SW
        //regwrite_control=1; memread_control=0; memwrite_control=0;
        //end
        //5'b01010: begin ALU_control=4'bxxxx;  //LW
        //regwrite_control=0; memread_control=0; memwrite_control=1;
        //end
        default : begin alu_control = 4'b0001;
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        endcase  
    end
endmodule



//////DATA MEMORY
module Data_Mem(
input clock, rd_mem_enable, wr_mem_enable,
input [11:0] address,
input [31:0] datawrite_to_mem,
output reg [31:0] dataread_from_mem );

reg [31:0] Data_Memory[8:0];

initial begin
    Data_Memory[0] = 32'hFFFFFFFF;
    Data_Memory[1] = 32'h00000001;
    Data_Memory[2] = 32'h00000005;
    Data_Memory[3] = 32'h00000003;
    Data_Memory[4] = 32'h00000004;
    Data_Memory[5] = 32'h00000000;
    Data_Memory[6] = 32'hFFFFFFFF;
    Data_Memory[7] = 32'h00000000;
    //Data_Memory[8] = 32'h00000008;
    //Data_Memory[9] = 32'h00000009;
    //Data_Memory[10] = 32'h0000000A;
    //Data_Memory[11] = 32'h0000000B;
    //Data_Memory[12] = 32'h0000000C;
    //Data_Memory[13] = 32'h0000000D;
    //Data_Memory[14] = 32'h0000000E;
    //Data_Memory[15] = 32'h0000000F;
    //Data_Memory[16] = 32'h00000010;
    //Data_Memory[17] = 32'h00000011;
    //Data_Memory[18] = 32'h00000012;
    //Data_Memory[19] = 32'h00000013;
    //Data_Memory[20] = 32'h00000014;
    //Data_Memory[21] = 32'h00000015;
    //Data_Memory[22] = 32'h00000016;
    //Data_Memory[23] = 32'h00000017;
    //Data_Memory[24] = 32'h00000018;
    //Data_Memory[25] = 32'h00000019;
    //Data_Memory[26] = 32'h0000001A;
    //Data_Memory[27] = 32'h0000001B;
    //Data_Memory[28] = 32'h0000001C;
    //Data_Memory[29] = 32'h0000001D;
    //Data_Memory[30] = 32'h0000001E;
    Data_Memory[31] = 32'h0000001F;
       
    end
    always@(posedge clock) begin
       if(wr_mem_enable) begin
            Data_Memory[address] <= datawrite_to_mem;
       end
       else if(rd_mem_enable) begin
               dataread_from_mem <= Data_Memory[address];
       end
       else begin
               dataread_from_mem <= 32'h00000000;
       end
    end
endmodule   



/////INST MEM
/*

*/
module INST_MEM(
    input [31:0] PC,
    input reset,
    output [31:0] Instruction_Code
);
    reg [7:0] Memory [43:0]; // Byte addressable memory with 32 locations

    
    assign Instruction_Code = {Memory[PC+3],Memory[PC+2],Memory[PC+1],Memory[PC]};

    
    
    initial begin
            // Setting 32-bit instruction: add t1, s0,s1 => 0x00940333
            Memory[3] = 8'b0000_0000;
            Memory[2] = 8'b0000_0001;
            Memory[1] = 8'b0111_1100;
            Memory[0] = 8'b0000_0001;
            // Setting 32-bit instruction: sub t2, s2, s3 => 0x413903b3
            Memory[7] = 8'b0000_0000;
            Memory[6] = 8'b0000_0110;
            Memory[5] = 8'b1000_1111;
            Memory[4] = 8'b1110_0010;
            // Setting 32-bit instruction: mul t0, s4, s5 => 0x035a02b3
            Memory[11] = 8'b0000_0000;
            Memory[10] = 8'b0000_0101;
            Memory[9] = 8'b0111_1100;
            Memory[8] = 8'b0000_0011;
            // Setting 32-bit instruction: or t3, s6, s7 => 0x017b4e33
            Memory[15] = 8'b1111_1111;
            Memory[14] = 8'b1111_0100;
            Memory[13] = 8'b1010_0000;
            Memory[12] = 8'b1010_0100;
            // Setting 32-bit instruction: and
            Memory[19] = 8'b0000_0000;
            Memory[18] = 8'b0010_1001;
            Memory[17] = 8'b0001_1101;
            Memory[16] = 8'b0010_0101;
            // Setting 32-bit instruction: xor
            Memory[23] = 8'b0000_0000;
            Memory[22] = 8'b0001_1000;
            Memory[21] = 8'b0000_1101;
            Memory[20] = 8'b0110_0110;
            // Setting 32-bit instruction: not
            Memory[27] = 8'b0000_0000;
            Memory[26] = 8'b0010_1001;
            Memory[25] = 8'b0011_1101;
            Memory[24] = 8'b1100_0111;
            // Setting 32-bit instruction: shift left
            Memory[31] = 8'b0000_0000;
            Memory[30] = 8'b0101_0111;
            Memory[29] = 8'b1100_0110;
            Memory[28] = 8'b0000_1000;
            // Setting 32-bit instruction: shift right
            Memory[35] = 8'b0000_0000;
            Memory[34] = 8'b0110_1010;
            Memory[33] = 8'b1101_0010;
            Memory[32] = 8'b0111_1001;
            /// Setting 32-bit instruction: Campare
            Memory[39] = 8'b0000_0000;
            Memory[38] = 8'b0111_1010;
            Memory[37] = 8'b1101_0010;
            Memory[36] = 8'b0110_1010;
            /// Setting 32-bit instruction:
            Memory[43] = 8'b0000_0000;
            Memory[42] = 8'b0111_0111;
            Memory[41] = 8'b1101_0010;
            Memory[40] = 8'b0111_0010;
        end
   

endmodule

//IFU
/*
The instruction fetch unit has clock and reset pins as input and 32-bit instruction code as output.
Internally the block has Instruction Memory, Program Counter(P.C) and an adder to increment counter by 4,
on every positive clock edge.
*/
module IFU(
    input clock,reset,
    output [31:0] Instruction_Code
);
reg [31:0] PC = 32'b0;  // 32-bit program counter is initialized to zero

    
    always @(posedge clock, posedge reset)
    begin
        if(reset == 1)  //If reset is one, clear the program counter
        PC <= 0;
        else
        PC <= PC+4;   // Increment program counter on positive clock edge
    end
    // Initializing the instruction memory block
    INST_MEM instr_mem(.PC(PC),.reset(reset),.Instruction_Code(Instruction_Code));

endmodule


///MUX

module Mux_2X1 (
    input mem_rd_select, // rd_mem_enable
    input wire [31:0] dataread_from_mem, regdata2,

    output reg [31:0] mux_out
);

always @(mem_rd_select or dataread_from_mem or regdata2) begin
    if (mem_rd_select == 1)
        mux_out <= dataread_from_mem ;
    else
        mux_out <= regdata2;
    end
endmodule

//DFlipFlop
module DFlipFlop(D,clock,Q);
input D; // Data input
input clock; // clock input
output reg Q; // output Q
always @(posedge clock)
begin
 Q <= D;
end
endmodule

///DATA path


module DATAPATH(
    input [4:0]Read_reg_add1,
    input [4:0]Read_reg_add2,
    input [4:0]Reg_write_add,
    input [3:0]Alu_control,
    input [11:0]Address,
    input Wr_reg_enable,Wr_mem_enable,Rd_mem_enable,
    input clock,
    input reset,
    output OUTPUT
    );

    // Declaring internal wires that carry data
    wire zero_flag;
    wire [31:0]Dataread_from_mem;
    wire [31:0]read_data1;
    wire [31:0]read_data2;
    wire [31:0]Mux_out;
    wire [31:0]Alu_result;
    //wire [31:0]datawrite_to_reg;

    // Instantiating the register file
    REG_FILE reg_file_module(.reg_read_add1(Read_reg_add1),.reg_read_add2(Read_reg_add2),.reg_write_add(Reg_write_add),.datawrite_to_reg(Alu_result),.read_data1(read_data1),.read_data2(read_data2),.wr_reg_enable(Wr_reg_enable),.clock(clock),.reset(reset));

    // Instanting ALU
    ALU alu_module(.A(read_data1), .B(Mux_out), .alu_control(Alu_control), .alu_result(Alu_result), .zero_flag(zero_flag));
    
    //Mux
    Mux_2X1 mux(.mem_rd_select(Rd_mem_enable),.dataread_from_mem(Dataread_from_mem),.regdata2(read_data2),.mux_out(Mux_out));

    //Data Memory
    Data_Mem DM(.clock(clock),.rd_mem_enable(Rd_mem_enable),.wr_mem_enable(Wr_mem_enable),.address(Address),.datawrite_to_mem(Alu_result),.dataread_from_mem(Dataread_from_mem));
    
    // Dflipflop
    DFlipFlop DF (.D(zero_flag), .Q(OUTPUT),.clock(clock));
endmodule


/*
A register file can read two registers and write in to one register.
The RISC V register file contains total of 32 registers each of size 32-bit.
Hence 5-bits are used to specify the register numbers that are to be read or written.
*/

/*
Register Read: Register file always outputs the contents of the register corresponding to read register numbers specified.
Reading a register is not dependent on any other signals.

Register Write: Register writes are controlled by a control signal RegWrite.  
Additionally the register file has a clock signal.
The write should happen if RegWrite signal is made 1 and if there is positive edge of clock.
*/
module REG_FILE(
    input [4:0] reg_read_add1,
    input [4:0] reg_read_add2,
    input [4:0] reg_write_add,
    input [31:0] datawrite_to_reg,
    output [31:0] read_data1,
    output [31:0] read_data2,
    input wr_reg_enable,
    input clock,
    input reset
);

    reg [31:0] reg_memory [31:0]; // 32 memory locations each 32 bits wide
    
    initial begin
        reg_memory[0] = 32'h00000000;
        reg_memory[1] = 32'hFFFFFFFF;
        reg_memory[2] = 32'h00000002;
        reg_memory[3] = 32'hFFFFFFFF;
        reg_memory[4] = 32'h00000004;
        reg_memory[5] = 32'h01010101;
        reg_memory[6] = 32'h00000006;
        reg_memory[7] = 32'h00000000;
        reg_memory[8] = 32'h10101010;
        reg_memory[9] = 32'h00000009;
        reg_memory[10] = 32'h0000000A;
        reg_memory[11] = 32'h0000000B;
        reg_memory[12] = 32'h0000000C;
        reg_memory[13] = 32'h0000000D;
        reg_memory[14] = 32'h0000000E;
        reg_memory[15] = 32'h0000000F;
        reg_memory[16] = 32'h00000010;
        reg_memory[17] = 32'h00000011;
        reg_memory[18] = 32'h00000012;
        reg_memory[19] = 32'h00000013;
        reg_memory[20] = 32'h00000014;
        reg_memory[21] = 32'h00000015;
        //reg_memory[22] = 32'h00000016;
        //reg_memory[23] = 32'h00000017;
        //reg_memory[24] = 32'h00000018;
        //reg_memory[25] = 32'h00000019;
        //reg_memory[26] = 32'h0000001A;
        //reg_memory[27] = 32'h0000001B;
        //reg_memory[28] = 32'h0000001C;
        //reg_memory[29] = 32'h0000001D;
        //reg_memory[30] = 32'h0000001E;
        reg_memory[31] = 32'hFFFFFFFF;
    end

    // The register file will always output the vaules corresponding to read register numbers
    // It is independent of any other signal
    assign read_data1 = reg_memory[reg_read_add1];
    assign read_data2 = reg_memory[reg_read_add2];

    // If clock edge is positive and regwrite is 1, we write data to specified register
    always @(posedge clock)
    begin
        if (wr_reg_enable) begin
            reg_memory[reg_write_add] = datawrite_to_reg;
        end     
    else
        reg_memory[reg_write_add] = 32'h00000000;
    end
endmodule


/////PROCESSOR


module PROCESSOR(
    input clock,
    input reset,
    output Output
);

    wire [31:0] instruction_Code;
    wire [3:0] ALu_control;
    wire WR_reg_enable;
    wire WR_mem_enable;
    wire RD_mem_enable;


    IFU IFU_module(.clock(clock), .reset(reset), .Instruction_Code(instruction_Code));
    
    CONTROL control_module(.opcode(instruction_Code[4:0]),.alu_control(ALu_control),.regwrite_control(WR_reg_enable),.memread_control(RD_mem_enable),.memwrite_control(WR_mem_enable));
    
    DATAPATH datapath_module(.Wr_mem_enable(WR_mem_enable),.Rd_mem_enable(RD_mem_enable),.Read_reg_add1(instruction_Code[9:5]),.Read_reg_add2(instruction_Code[14:10]),.Reg_write_add(instruction_Code[19:15]),.Address(instruction_Code[31:20]),.Alu_control(ALu_control),.Wr_reg_enable(WR_reg_enable), .clock(clock), .reset(reset), .OUTPUT(Output));

endmodule

**********************************************************************************************************************************************************

Below is my Synthesis.tcl file for genus synthesis

********************

set_attribute lib_search_path "/home/sameer23185/Desktop/VDF_PROJECT/lib"
set_attribute hdl_search_path "/home/sameer23185/Desktop/VDF_PROJECT"
set_attribute library "/home/sameer23185/Desktop/VDF_PROJECT/lib/90/fast.lib"
read_hdl Master.v
elaborate
read_sdc Min_area.sdc
set_attribute hdl_preserve_unused_register true
set_attribute delete_unloaded_seqs false
set_attribute optimize_constant_0_flops false
set_attribute optimize_constant_1_flops false
set_attribute optimize_constant_latches false
set_attribute optimize_constant_feedback_seqs false
#set_attribute prune_unsued_logic false
synthesize -to_mapped -effort medium
write_hdl > report/HDL_min_Netlist.v
write_sdc > report/constraints.sdc
write_script > report/synthesis.g
report_timing > report/synthesis_timing_report.rep
report_power > report/synthesis_power_report.rep
report_gates > report/synthesis_cell_report.rep
report_area > report/synthesis_area_report.rep
gui_show

**********************************************

WHEN I COMPARING MY GOLDEN.V WITH HDL_min_Netlist.v  during   conformal , I got  these  non-equivalent   point   for   every reg memory and for every data memory. I don't know what to do with these non-equivalent point. I've been stuck here for the past four days. Please help me in this and how can I remove this non- equivalent point , since I am new to this I really don't know what to do.

hi

How can I tell the LEC tool to ignore a combination of Primary input bus in both Golden and revised.

For example in both Golden and revised there is 

input [3:0] data_in

I want LEC not to check the case that data_in[3:0] == 4'b1000

I was trying to remove the cdn_loop_breaker cells from the netlist. 
When I tried the below 2 things, it removing the cdn_loop_breaker cells but while connecting the cdn_loop_breaker cell input to its proper connection, its somehow misleading the connections

Things i tried:
1.  remove_cdn_loop_breaker -instances *cdn_loop_breaker*
then i just ran remove_cdn_loop_breaker  comand without the -instances switch
2. remove_cdn_loop_breaker  
     
both of the above things are not providing the proper connections after removing the loop_breaker_cells

I want to use a transmission gate in my design, but it is not available as a standard cell for Genus RTL synthesis. How can I perform an analysis of area, power, and critical path delay that includes the transmission gate alongside standard cells?

Could you provide guidance or a methodology for integrating custom cells, like the transmission gate, into the synthesis flow for accurate analysis?

Hi ,

 I am using conformal v23.2 for LEC checking b/w netlist vs Netlist. I am getting 8 not mapped points(z) in revised but when i check in mapping manager it showing 0 Not mapped points and showing this 8 not mapped points in extra unmapped section z(f) snps_scan_out_6 .How to resolve this issue Pls help

regards,

We have a big circuit having 12K gates totally and trying to show it in one page slide visually. But it is so hard for us to shrink it down from gate-level to module-level. Do you have any function like these:

• Toggle wires on and off
• “Right click” elements and group them into black boxes
• Quickly left or right align elements to clean up pictures

I am trying to understand the Linting process. I know that mainly JasperGold is the tool for this purpose. Though I think JasperGold is more suited for later stages of the design. As a RTL Design Engineer, I want to make sure that if another tool has the capability of doing Linting earlier in the flow. for example, does Xcelium, Genus or Confomal support linting. I have seen some contradicting information online regarding this topic, though I can't find anything related to Linting on any of these tools.

Thanks

Hi. I'm a very new learner on Cadence. I want to synthesis my logic design for the maximum, minimum and an average results of delay, power dissipation and area under varying multiple inputs of different data. The different data will be exported from other software results. I'm lost on the steps/processes I should do.

Could anyone suggest me on which software and/or function or scripts I should use to achieve these results?

Optimize Regression Suite, Accelerate Coverage Closure, and Increase hit count of rare bins using Xcelium Machine Learning. It is easy to use and has no learning curve for existing Xcelium customers. Xcelium Machine Learning Technology helps you discover hidden bugs when used early in your design verification cycle.(read more)

Artificial intelligence (AI) is everywhere. Machine learning (ML) and its associated inference abilities promise to revolutionize everything from driving your car to making your breakfast. Verification is never truly complete; it is over when you run...(read more)

With the DRAM fabrication advancing from 1x to 1y to 1z and further to 1a, 1b and 1c nodes along with the DRAM device speeds going up to 8533 for Lpddr5/8800 for DDR5, Data integrity is becoming a really important issue that the OEMs and other users have to consider as part of the system that relies on the correctness of data being stored in the DRAMs for system to work as designed.

It’s a complicated problem that requires multiple ways to deal with it.

Traditionally one of the main approaches to deal with data errors is to rely on the ECC. ECC requires additional memory storage in which the ECC codes will calculated and stored at the time of memory write to DRAM. These codes will be read back along with the memory data during to the reads and checked against the data to make sure that there are no errors. Typical ECC schemes use Hamming code that provide for single bit error correction and double bit error detection per burst. Also, while several of previous generation of DRAM required Host to keep aside system memory for ECC storage latest DRAMs like Lpddr5 and DDR5 support on die ECC as part of the normal DRAM function that can be enabled using mode registers. DDR5 further requires Host to run through an ECC Error Check and Scrub (ECS) cycle on an average every tECSint time (Average Periodic ECS Interval) to prevent data errors.

Not meeting the DRAM Refresh requirement is a major reason that can lead to loss of data. This could be challenging as the PVT variation can cause the refresh requirement to change over time. Putting the DRAM in Self Refresh mode can help off-loading Refresh tracking responsibilities to DRAM but may prevent Host to do other scheduling optimizations and should be carefully considered.

Some of the other things that can affect the DRAM data are

1. Row hammer where same or adjacent rows are activated again and again leading to loss or changing of data contents in the rows that has not being addressed. Latest DRAMs like Lpddr5/Ddr5 support Refresh Management (including DRFM and ARFM) that allows the Host to compensate for these problems by issuing dedicated RFM commands helping DRAMs deals with potential Data loss issues arising out of Row hammer attacks.
2. Device temperature is another important factor that the Host needs to be aware of and if the application requires DRAM to operate at elevated temperature. The user needs to check with DRAM Vendor on the temperature range that DRAM can still operate. Data integrity at thresholds greater than certain temperature is not assured regardless of refresh rate unless DRAM is manufactured to withstand that.
3. Loss of power to DRAM will cause DRAM to lose all its contents. If this is a real concern for the system designer, they should consider using NVDIMM-N devices which has an onchip controller and a power source which is just enough to allow the DRAM contents to be copied into a backup non-volatile memory before power is lost. When the power is stored back, the stored memory contents in the non-volatile memory will be written back to the DRAM and system can continue to operate as it was before the power loss event occurred.

For transmissions and manufacturing errors DRAMs support additional features like CRC, DFE, Pre-Emphasis and PPR which will be covered in the next blog.

Cadence MMAV VIPs for DDR5/DDR5 DIMM and LPDDR5 are compressive VIP solutions and supports all of the above-listed Data integrity features including support for ECC error injection and SBE correction/DBE detection to assist with the verification challenges dealing with data integrity issues.

More information on Cadence DDR5/LPDDR5 VIP is available at Cadence VIP Memory Models Website.

Shyam 

The automotive industry revolutionized the definition of a vehicle in terms of safety, comfort, enhanced autonomy, and internet connectivity. With this trend, the automotive industry rapidly adopted automotive Ethernet such as 10Base-T1, 100Base-T1, and in some cases, 1000Base-T1. 

Faster Speed (than CAN-FD), Scalability, embedded security protocols (like MacSec), cost and energy efficiency, and simple yet redundant network made Ethernet an obvious choice over CAN(FD) and FlexRay.  

Ethernet 10Base-T1 

10BASE-T1S is defined under IEEE with 802.3cg. The S in 10BASE-T1S stands for a short distance. 10BASE-T1S uses a multidrop topology, where each node connects to a single cable. Multidrop topology eliminates the need for switches and, as a result, fewer cables/less cost. The primary goal of 10BASE-T1S is a deterministic transmission on a collision-free multidrop network. 10BASE-T1S cables use a pair of twisted wires. As per IEEE, at least eight nodes can connect to each, but more connections are feasible.    

The Physical Layer Collision Avoidance [PLCA] protocol ensures that it uses the entire 10 Mbps bandwidth. In 10BaseTs, Reconciliation Sublayer provides optional Physical Layer Collision Avoidance (PLCA) capabilities among participating stations. Using PLCA-enabled Physical Layers in CSMA/CD half-duplex shared-medium networks can provide enhanced bandwidth and improved access latency under heavily loaded traffic conditions. The working principle of PLCA is that transmit opportunities on a mixing segment are granted in sequence based on a node ID unique to the local collision domain (set by the management entity). 10BASE-T1S also supports an arbitration scheme that guarantees consistent node access to the media within a predefined time.  

The 10BASE-T1S PHY is intended to cover the low-speed/low-cost applications in the industrial and automotive environment. A large number of pins (16) required by the MII interface is one of the significant cost factors that must be addressed to fulfill this objective. The 10BASE-T1S "Transceiver" solution is suited for embedded systems where the digital portion of the PHY is fully integrated, e.g., into an MCU or an Ethernet switch core, leaving only the analog portion (the transceiver) into a separate IC. 

Ethernet 100Base-T1/1000Base-T1 

100Base-T1 and 1000Base-T1 can be used for audio/video information. With Higher bandwidth capacity, 100Base-T1/ 1000Base-T1 paired with AVB (Audio video bridging) can be used for car infotainment systems. 100Base-T1/1000Base-T1 paired with time-sensitive networking [TSN] protocol can be used to fulfill the automotive industry's mission-critical, time-sensitive, and deterministic latency needs. 

 PTP Over MacSec  

With today's automotive network, all the Electronic Control Units connected require timing accuracy and network synchronization, Precision Time Protocol (PTP), defined in IEEE 1588, provides synchronized clocks throughout a network.  While maintaining the timing accuracy for mission-critical applications, protecting the vehicle network from vulnerable threats is mandatory, and PTP over MacSec provides the consolidated solution.  

With the availability of the Cadence Verification IP for 10/100/1000BaseT1 and TSN, adopters can start working with these specifications immediately, ensuring compliance with the standard and achieving the fastest path to IP and SoC verification closure. The 10/100/1000GBaseT1 and TSN provide a full-stack solution, including support to the PHY, MAC, and TSN layers with a comprehensive coverage model and protocol checkers. Ethernet BaseT1 and TSN VIP covers all features required for complete coverage verification closure. More details are available in the Ethernet Verification IP portfolio. 

Krunal 

The increase in compute and data-intensive applications and the need for lower power consumption have resulted in a rapidly growing number of Arm-based devices in various market segments; this requires fast time to market (TTM) and support for off-t...(read more)

Ensuring that the RTL designs correctly implement the C++ algorithmic intent in every circumstance is difficult to achieve with conventional verification. Learn more how Jasper C2RTL App helps to perform equivalence checking with 100x performance improvement(read more)

Learn how Xcelium PowerPlayback App enables the massively parallel Xcelium replay of waveforms for glitch-accurate power estimation of multi-billion gate SoC designs.(read more)

To stay ahead in competition in chip design real-time collaborations ensure traceability, speedy innovations at reduced the cost.(read more)

Xcelium Simulator has been in the industry for years and is the leading high-performance simulation platform. As designs are getting more and more complex and verification is taking longer than ever, the need of the hour is plug-and-play apps that ar...(read more)

Speed increase requirements keep on flowing by in all the domains surrounding us. The same applies to memory storage too. Earlier mobile devices used eMMC based flash storage, which was a significantly slower technology. With increased SoC processing speed, pairing it with slow eMMC storage was becoming a bottleneck. That is when modern storage technology Universal Flash Storage (UFS) started to gain popularity. 

UFS is a simple and high-performance mass storage device with a serial interface. It is primarily used in mobile systems between host processing and mass storage memory devices. Another important reason for the usage of UFS in mobile systems like smartphones and tablets is minimum power consumption. 

To achieve the highest performance and most power-efficient data transport, JEDEC UFS works in collaboration with industry-leading specifications from the MIPI® Alliance to form its Interconnect Layer. MIPI UniPro is used as a transport layer, and MIPI MPHY is used as a physical layer with the serial DpDn interface. 

UFS 4.0 specification is the latest specification from JEDEC, which leverages UniPro 2.0 and MPHY 5.0 specification standards to achieve the following major improvements:

• Enables up to 4200 Mbps read/write traffic with MPHY 5.0, allowing 23.29 Gbps data rate. 
• High Speed Link Startup, along with Out of Order Data Transfer and BARRIER Command, were introduced to improve system latencies. 
• Data security is enhanced with Advanced RPMB. Advance RPMB also uses the EHS field of the header, which reduces the number of commands required compared to normal RPMB, increasing the bandwidth. 
• Enhanced Device Error History was introduced to ease system integration. 
• File Based Optimization (FBO) was introduced for performance enhancement. 

Along with many major enhancements, UFS 4.0 also maintains backward compatibility with UFS 3.0 and UFS 3.1. 

JEDEC has just announced the UFS 4.0 specification release, quoting Cadence support as a constant contributor in the JEDEC UFS Task Group, actively participating in these specifications development.  

With the availability of the Cadence Verification IP for JEDEC UFS 4.0, MIPI MPHY 5.0 and MIPI UniPro 2.0, early adopters can start working with the provisional specification immediately, ensuring compliance with the standard and achieving the fastest path to IP and SoC verification closure.  

More information on Cadence VIP is available at the Cadence VIP Website. 

Yeshavanth B N 

It has become challenging to ensure that the designs are complete, correct, and adhere to necessary coding rules before handing them off for RTL verification and implementation. RTL Designer Signoff Solution from Cadence helps the user identify RTL bugs at a very early development stage, saving a lot of effort and cost for the design and verification team. Our reputed customers have confirmed that using RTL signoff for their design IP helped save up to 4 weeks and reduce the late-stage RTL changes by up to 80%.(read more)

NAND Flash memory is now a widely accepted non-volatile memory in many application areas for data storage such as digital cameras, USB drive, SSD and smartphones. One form of NAND flash memory, Toggle NAND, was introduced to transmit high-speed data asynchronously thus consuming less power and increasing the density of the NAND flash device. 

The initial Toggle NAND versions had memory arranged in terms of SLC (Single Level Cell) or MLC (Multi Level Cell) mode that was considered as a 2D scalar stack and their frequency of operation was also less. The ever-growing demand of high memory capacity and high throughput required further research in the areas like the shrinking size of cell, performance to fill-in these gaps.

Some of these new requirements were incorporated, leading to newer versions of Toggle NAND, namely 3.0 and 4.0, with a re-arrangement of the internal memory developing a 3D layer of memory. With such structures, higher capacity of the memory was possible, but performance was the primary challenge as the latency of the write/read of memory quadrupled with the same frequency.

The key to improving the performance and run the device at very high speed in low power mode was to enhance the frequency of operation for faster read/writes to the memory and reduce the voltage levels.

But with every technology advancement comes some other problems, the next being the data sampling at that high frequency that can cause setup/hold time issues. To overcome these concerns, different types of trainings on the signal interface were made mandatory that shall assist in proper sampling of the data. Few other features for improving the integrity of the signals were added.

The current set of commands were applicable to access the SLC and MLC memory modes but with the 3D layering, these commands were lacking access to the entire set of TLC (Triple Level Cell) and QLC (Quad Level Cell) memory modes. Thus, more commands were required to make sure that the 3D layering was fully written/read.

Main features of Toggle NAND 4.0 :

• High Density of Memory
• High Frequency of operation, greater than 800 MHz
• Data Trainings

Cadence Verification IP for Flash Toggle NAND 4.0 is available to support the newer version of Flash Toggle NAND 4.0, allowing to simulate the memory device for efficient IP, SoC, and system-level design verification. Semiconductor companies can start using it to fully verify their controller design and achieve functional verification closure on it within no time. 
 
Gaurav 

In a network containing multiple nodes, the need for synchronization between the various nodes is not just instrumental but also a complicated and highly complex process. This process becomes even more tricky if we synchronize the clocks between the Manager and the Peripheral. As we know, in a real-time network, some of the nodes would behave like Managers while some would be a Peripheral. If we must make the communication process smooth, then the local clocks of these nodes must be synchronized. 

The problem with this synchronization is that we have the clock running in the Manager as well. If we send the value of the Manager clock to the Peripheral, the synchronization doesn’t happen as we have a propagation delay of the messages, along with the propagation delay of the electronic circuits of Manager and the Peripheral.  

The cherry on the cake is that these electronic circuit propagation delays are not random and remain constant, so we can add a time offset to it to match the clock. To tackle this challenge, IEEE has come up with a protocol named “Precision Timing Protocol.” 

Operation of PTP: 

To synchronize the clocks, a Sync message is sent by the Manager to the Peripheral, which then timestamps the receiving time of the same. Following this, a ‘Follow up’ message is issued by the Manager stating the timestamp at which the Sync message was sent. 

The Peripheral then finds the difference between the two values and adds this to its current time. After this, the time difference between the Manager and the Peripheral narrows down to only the propagation delay of the messages.  

To overcome this, the Peripheral issues a ‘Delay Request’ to the Manager, and the Manager, in turn, issues a ‘Delay Response.’ Both these messages have the timestamp of when they were issued. The time at which they are received is then noted. Since two messages are sent, one from the Peripheral and the other from the Manager, there are two propagation delays. Then half of this value is our propagation delay. 

The Peripheral then adds this propagation delay to its clock, and hence the clock gets synchronized. 

Advantages of PTP: 

1. It provides accurate time stamping. 
2. It is a well-known clock synchronization protocol. 
3. It provides intensified security inside the premises. 
4. It provides the possibility of setting coordinated actions and synchronized communication. 

There are various versions of PTP that have been developed over time, namely PTPv1, PTPv2, PTPv2_1, and the latest PTP-AS. 

Cadence Verification IP for Ethernet is available to support the newer version of PTP, allowing simulation of the device for efficient IP, SoC, and system-level design verification. Semiconductor companies can start using it to fully verify their controller design and achieve functional verification closure on it within no time.