Aeration technologies designed to help landfill waste break down faster need to be refined in order to reduce pollution, greenhouse gas emissions and the long-term costs associated with landfill. This is according to a recent review of landfill aeration, which outlines some of the different systems currently available and highlights the need for better monitoring and sharing of data.

A recent study has assessed some of the environmental impacts of the production of batteries used with low carbon systems, such as photovoltaic cells and wind turbines. The results indicate that lithium-based batteries have the most significant impact, in terms of metal depletion and greenhouse gas (GHG) emissions, but more complete data are needed on possible toxic impacts to conduct a full comparison between batteries.

A new approach giving practical guidance for engaging communities in assessing and managing risks associated with re-development of contaminated land could help to smooth local decision making processes. It recommends a set of principles that risk managers and policymakers can use to shape their community engagement activities.

Networks of wireless sensors could be used to monitor traffic noise. A new study shows that the wifi sensor systems, although slightly less accurate than precision noise monitoring systems, can provide detailed information, with dense coverage, about traffic noise over a longer period. Their low cost and low energy requirements make them particularly suitable and attractive for use by local authorities or even community groups.

The growing use of Information and Communication Technology (ICT) services is producing an increasing amount of greenhouse gas (GHG) emissions. New research has proposed a network model spanning Europe, USA and Canada that uses ‘cloud computing’ to supply renewable energy to IT data centres.

Monitored natural attenuation (MNA) is a long-term, ‘hands-off’ approach to cleaning up contaminated land. New research has surveyed the current development of MNA in Europe and demonstrates a clear need for practitioners to systematically collect and learn from each other’s experiences with this form of brownfield remediation.

Compared with traditional remediation techniques used to remediate brownfield sites, supporters of phytoremediation argue that it is cheaper and more environmentally-friendly. A new analysis has reviewed its strengths, weaknesses, opportunities and threats, and suggests it is well suited to cleaning up sites with low to medium levels of contamination.

New barriers have been developed to prevent invasive American signal crayfish from moving upstream and colonising important European crayfish habitat. The barriers, designed to stop crayfish but allow fish to pass, have been found to be effective where water flow rates are sufficiently high.

Use of environmentally-friendly LED lighting in Europe could play an important role in reducing energy consumption. A new report has now assessed the market for a mass adoption of such light sources, highlighting the need to ensure that the European lighting industry remains competitive.

Constructed wetlands can effectively remove veterinary drugs from wastewater, preventing contamination of the environment, research suggests. A recent study has demonstrated that laboratory-scale constructed wetlands were able to remove between 94 and 98% of two commonly used antibiotics from pig farm wastewater.

Some agricultural activities, such as irrigation, could be powered by renewable sources, a new study indicates. Farm machinery could also be renewably-powered, but the machinery would need to be adapted to use renewable electricity, instead of liquid fuel.

By using design tools to increase sustainability at every stage of production, researchers have developed a new eco-light. The light, which uses low wattage LEDs and recycled plastic, has a substantially lower environmental impact than the traditional equivalent LED lights.

Satellite observations are valuable aids to detect and monitor fire activity. A recent study has investigated how satellite images of fire activity, together with information on vegetation cover and fire risk associated with long and short-term atmospheric conditions could be used to help authorities better manage the risk of wildfires in Mediterranean Europe.

A major environmental challenge for wastewater treatment is the disposal of excess sludge produced during the process. The LIFE Perbiof project has been developing and testing a technology that will help to overcome this challenge. Results demonstrate it can perform highly effective treatment of municipal wastewater (removing 80% of the organic content) while producing low levels of sludge.

Every year many marine animals including seabirds, sea turtles and sharks are unintentionally caught as bycatch in commercial fishing gear. Recent research has demonstrated that illuminating fishing nets with ultraviolet (UV) lights can reduce sea turtle bycatch without significantly affecting the number of fish caught or their market value.

Recycling offers a promising means of supplying the rare earth elements neodymium and dysprosium, used in computing and low-carbon technologies, research suggests. If recycling infrastructure and technologies are prepared now to deal with the larger volumes of high-tech waste expected in the future, 7-9% of global demand for these critical elements could be met by recycling by the year 2030.

A smartphone app has been designed to help shoppers choose more environmentally-friendly protein-rich products, namely meat, vegetarian alternatives, eggs and dairy products. The methods and data used to measure these products' lifecycle environmental impacts are presented in a recent study.

A new tool for minimising offshore wind energy's impacts on other activities in the North Sea has been developed. The tool identifies space for wind farms based on their priority compared to other marine activities, such as sand extraction or fishing.

General acceptance of offshore wind farms is most positively influenced by reductions in fossil fuel imports and contributions to global warming mitigation, and most negatively by concerns about increases in electricity price and impacts on scenic views, US research suggests. Other factors, such as reductions in air pollution, were not closely related to general acceptance even though on average the public rated them as important.

A new mobile phone application which can help monitor traffic-noise exposure is presented in a recent study. The app, ‘2Loud?’, can measure indoor night-time noise exposure and, given large-scale community participation, could provide valuable data to aid urban planning, the researchers say. In an Australian pilot study, nearly half of participants who used the app found that they were exposed to potentially unhealthy levels of night-time noise.

Which types of buildings will require the least energy for heating and cooling under climate change? A study in Vienna, Austria, looked at the balance between heating and cooling demand in four different types of buildings. The research provides a method that could be useful for other European cities trying to adapt to climate change.

Using vegetable waste to produce bioplastics can provide sustainable alternatives to non-biodegradable plastic, new research has found. The biodegradable plastic developed for this study, produced using parsley and spinach stems, cocoa pod husks and rice hulls, have a range of mechanical properties comparable to conventional plastics which are used for products from carrier bags to kitchenware and computer components.

Erratum
This article was amended 10.12.14 to give more information about the nature of trifluoroacetic acid.

Construction of Concentrated Solar Power (CSP) plants – electricity generation which concentrates sunlight to generate heat – can have a range of negative effects on wildlife, but these effects are short lived, new research has found. Once in use, CSP plants can even have some positive effects, reducing soil erosion, for instance.

A new pomegranate-inspired design is the basis of a longer-lasting lithium-ion battery created by US researchers. They designed a battery with an anode made from ‘silicon pomegranates’, which doubles the amount of energy that can be stored compared to a standard carbon anode.

Polarised light forms the basis of many technologies, such as computer monitors. However, current approaches for making polarised light are inefficient, as they produce more than is ultimately used or needed. Researchers may now have found a way to directly produce polarised light using tiny nanostructures, called quantum dots, opening the way for more energy-efficient technologies.

‘Dye-sensitised solar cells’ (DSSCs) are an alternative to traditional silicon photovoltaic (PV) cells. They have a number of advantages over traditional PV solar cells, including greater flexibility and lower manufacturing cost, but they are less efficient at turning sunlight into electricity. Taking inspiration from nature, new research has doubled their efficiency using pine tree-shaped nanotubes.

Researchers have summarised the most effective ways that nanostructures can improve the efficiency and lower costs of photovoltaic (PV) solar cells in a recent analysis. Sculpting ultra-thin solar cell surfaces at the nano-scale has been found to effectively boost their efficiency.

‘Perovskite solar cells’ (PSCs) are less costly than conventional silicon solar cells, but one of their key components is energy-intensive to manufacture as high temperatures are needed. Now researchers have identified new alternative materials for this component which cut energy demands as they can be produced at low temperatures.

Desktop three-dimensional (3D) printers, available for use in offices and homes, can release between 20 and 200 billion ultra-fine particles (UFPs) per minute, finds new research. UFPs may pose a risk to health, and the study’s authors recommend caution when operating 3D printers inside unventilated or unfiltered indoor environments.

A nanoscale 3D printing technique could be useful for nanomanufacturing processes with environmental applications. The authors of a new study have found a way to control their printing process by incorporating a simple pattern into the printing surface. They say their technique could reduce costs for nanoscale printing.

A new review examines the potential uses and scientific, technical and manufacturing problems facing ‘van der Waals heterostructures’ - an emerging science which uses building block-like nanomaterials. Van der Waals heterostructures are nanomaterials built by layering different materials, each one atom thick, on top of each other, to create materials with unique properties and uses.

A new study has found evidence for lung toxicity of different forms of ‘cellulose nanocrystals’ (CNCs) in mice. The study suggests that physical characteristics, such as length, of the CNC relates to the type of effect it has on the lung. These nanosized crystals, made from plant-derived materials, are increasingly being used in novel applications, such as cleaning up oil spills in water and flexible electronic displays, and consumer products, which raises concerns about their potential health impacts.

A three-step chemical process could successfully recover high-purity silicon from recycled photovoltaic (PV) solar panels, new tests show. The scientists behind the research say that recycling not only helps the PV industry meet regulatory requirements, but also reduces pressure on demand for raw materials.

This Thematic Issue provides a flavour of recent work by scientists in the area of biodiversity monitoring to highlight both up-to-date approaches to conservation and evaluation, and how long-term monitoring data could be used more effectively in management and policy decisions.

Improving the energy efficiency of homes could have positive economy-wide impacts, recent UK research suggests. It would allow householders to spend the money they save on energy on other products and services. Although this additional demand and the associated production in non-energy sectors would partly offset the energy saved in the home, this ‘rebound effect’ does not completely outweigh the household energy savings.

Wind is an important renewable energy source for Europe. The wind power capacity installed in 2014 could produce enough electricity to meet over 10% of the EU’s electricity consumption. However, wind power structures can also be harmful to birds, which can collide with turbines. This study assessed methods of reducing avian collisions with wind turbines and makes several practical recommendations.

Wind energy will likely continue to play a leading role in reaching the EU’s renewable energy targets. However, in some areas wind turbines face social opposition based in large part on the visual impact of wind turbines in the landscape. A new study outlines a novel methodology to measure emotional response to wind turbine visuals, which may assist wind farm planners in gauging public acceptance.

Adding nanoparticles to water in solar collectors, which are used to capture the sun’s energy, can considerably improve their performance, a recent study on nanofluids has found. The energy efficiency of the collector can be increased by up to 76.6% when using water containing 0.1% by volume of titanium dioxide nanoparticles, compared with water alone.

Power plants are a major source of CO2 emissions and contributor to global warming. This study reports on a portable technology to remove CO2 from their combustion exhaust gases. Pilot testing on a coal burning plant in Poland captured thousands of kilograms of CO2 per day. This could be a viable future means of mitigating CO2 emissions from the power generation sector.

A new tool for flood simulation and visualisation is accessible for both experts and practitioners, allowing them to collaborate better on flood planning and relief. Among other features, the new system includes 3D simulations, rainfall simulation and water flow data.

Shortages of indium, a key metal found in thin-film solar cells, could limit their large-scale deployment in the future. A new study has outlined four ways that indium supplies could be increased to meet future demand. For example, indium could be extracted more efficiently from zinc ores, or historic wastes containing indium could be processed to extract the element.

Wind and solar energy are effectively limitless resources, but construction of renewable power must compete for a finite amount of land. This study uses a constrained assessment of available land to see whether global energy demand could be fully met by renewable sources. The analysis predicts that by 2070, the world could produce between 730 and 3700 exajoules of electricity per year (EJ/a1) from renewable power, which, even at lowest available land estimates, could meet 2070 electricity needs in most countries.

Cool pavements, which can be used to reduce the Urban Heat Island (UHI) effect, where towns and cities are warmer than surrounding rural areas, have been reviewed in new research. The review found that reflective pavements can reduce temperatures by up to 20°C and are more durable than evaporative pavements, which are less effective at temperature reduction but may have other benefits, such as reducing runoff.

Priorities for future environmental technology research and development were outlined by a study that surveyed experts in the field in 2010-11. The global environmental problems and potential solutions that new technologies could provide were identified and discussed in questionnaires and workshops. One of the main recommendations of the study was for a greater focus on flexible and cost-effective innovations that could alleviate potential environmental issues in countries with developing and emerging economies.

Identifying emerging research areas and technologies is important for decision makers, but notoriously difficult to do. This study presents a new way of searching the literature to identify emerging topics, which will help policymakers, industry and funding bodies to make better decisions.

‘Climate-smart agriculture’ aims to sustainably increase agricultural production and increase resilience to climate change. One aspect focuses on climate-smart technologies. This study interviewed users and producers of these technologies, highlighting barriers to adoption and possible means of overcoming them, including increasing awareness, user-focused design and changes to policy.

Satellite images can provide important evidence of environmental crime, according to a UK researcher. Satellites are now able to take near-photographic pictures of objects on Earth as small as 0.3 metres which means that individual trees, cars and industrial pipes, for example, can be monitored from space.

Wind farms are an important component of Europe’s shift towards a greener energy supply, but they could potentially have an impact on marine ecosystems. This study provides the first measurements of the distribution of harbour seals in relation to the construction and operation of wind farms, and makes recommendations to minimise any potential harm, including breaks in the pile-driving phase of construction.

Electricity consumption fell by 22–27% in low-income households participating in an energy-efficiency programme in Cyprus, France, Malta and Spain, reports a new study. Participants were provided with a range of tools and information to help them curb their energy use, including smart meters and customised reports. The results confirm the value of tailoring information to specific demographic groups.

Environmental impacts for a wave energy device, tidal stream and tidal range plants are potentially eight, 20 and 115 times lower respectively than for coal-generated power, averaged over five impact categories. An assessment of the amount of metal used by these technologies, however, shows an impact respectively 11 and 17 times higher than for coal- and gas-based power generators. These are the findings of a recent study, which compared the life-cycle environmental impacts of various wave and tidal energy devices with other forms of energy generation. The researchers conclude that wave and tidal energy plants qualify as ‘green’ technologies according to their definition, but that their impacts on marine ecosystems need further research.