Tactile controls are back in vogue. Apple added two new buttons to the iPhone 16, home appliances like stoves and washing machines are returning to knobs, and several car manufacturers are reintroducing buttons and dials to dashboards and steering wheels.

With this “re-buttonization,” as The Wall Street Journal describes it, demand for Rachel Plotnick’s expertise has grown. Plotnick, an associate professor of cinema and media studies at Indiana University in Bloomington, is the leading expert on buttons and how people interact with them. She studies the relationship between technology and society with a focus on everyday or overlooked technologies, and wrote the 2018 book Power Button: A History of Pleasure, Panic, and the Politics of Pushing (The MIT Press). Now, companies are reaching out to her to help improve their tactile controls.

Rachel Plotnick on...

• Researching the history of buttons
• The renaissance of physical controls
• Working with companies on “re-buttoning”

You wrote a book a few years ago about the history of buttons. What inspired that book?

Rachel Plotnick: Around 2009, I noticed there was a lot of discourse in the news about the death of the button. This was a couple years after the first iPhone had come out, and a lot of people were saying that, as touchscreens were becoming more popular, eventually we weren’t going to have any more physical buttons to push. This started to happen across a range of devices like the Microsoft Kinect, and after films like Minority Report had come out in the early 2000s, everyone thought we were moving to this kind of gesture or speech interface. I was fascinated by this idea that an entire interface could die, and that led me down this big wormhole, to try to understand how we came to be a society that pushed buttons everywhere we went.

Rachel Plotnick studies the ways we use everyday technologies and how they shape our relationships with each other and the world.Rachel Plotnick

The more that I looked around, the more that I saw not only were we pressing digital buttons on social media and to order things from Amazon, but also to start our coffee makers and go up and down in elevators and operate our televisions. The pervasiveness of the button as a technology pitted against this idea of buttons disappearing seemed like such an interesting dichotomy to me. And so I wanted to understand an origin story, if I could come up with it, of where buttons came from.

What did you find in your research?

Plotnick: One of the biggest observations I made was that a lot of fears and fantasies around pushing buttons were the same 100 years ago as they are today. I expected to see this society that wildly transformed and used buttons in such a different way, but I saw these persistent anxieties over time about control and who gets to push the button, and also these pleasures around button pushing that we can use for advertising and to make technology simpler. That pendulum swing between fantasy and fear, pleasure and panic, and how those themes persisted over more than a century was what really interested me. I liked seeing the connections between the past and the present.

[Back to top]

We’ve experienced the rise of touchscreens, but now we might be seeing another shift—a renaissance in buttons and physical controls. What’s prompting the trend?

Plotnick: There was this kind of touchscreen mania, where all of a sudden everything became a touchscreen. Your car was a touchscreen, your refrigerator was a touchscreen. Over time, people became somewhat fatigued with that. That’s not to say touchscreens aren’t a really useful interface, I think they are. But on the other hand, people seem to have a hunger for physical buttons, both because you don’t always have to look at them—you can feel your way around for them when you don’t want to directly pay attention to them—but also because they offer a greater range of tactility and feedback.

If you look at gamers playing video games, they want to push a lot of buttons on those controls. And if you look at DJs and digital musicians, they have endless amounts of buttons and joysticks and dials to make music. There seems to be this kind of richness of the tactile experience that’s afforded by pushing buttons. They’re not perfect for every situation, but I think increasingly, we’re realizing the merit that the interface offers.

What else is motivating the re-buttoning of consumer devices?

Plotnick: Maybe screen fatigue. We spend all our days and nights on these devices, scrolling or constantly flipping through pages and videos, and there’s something tiring about that. The button may be a way to almost de-technologize our everyday existence, to a certain extent. That’s not to say buttons don’t work with screens very nicely—they’re often partners. But in a way, it’s taking away the priority of vision as a sense, and recognizing that a screen isn’t always the best way to interact with something.

When I’m driving, it’s actually unsafe for my car to be operated in that way. It’s hard to generalize and say, buttons are always easy and good, and touchscreens are difficult and bad, or vice versa. Buttons tend to offer you a really limited range of possibilities in terms of what you can do. Maybe that simplicity of limiting our field of choices offers more safety in certain situations.

It also seems like there’s an accessibility issue when prioritizing vision in device interfaces, right?

Plotnick: The blind community had to fight for years to make touchscreens more accessible. It’s always been funny to me that we call them touchscreens. We think about them as a touch modality, but a touchscreen prioritizes the visual. Over the last few years, we’re seeing Alexa and Siri and a lot of these other voice-activated systems that are making things a little bit more auditory as a way to deal with that. But the touchscreen is oriented around visuality.

It sounds like, in general, having multiple interface options is the best way to move forward—not that touchscreens are going to become completely passé, just like the button never actually died.

Plotnick: I think that’s accurate. We see paradigm shifts over time with technologies, but for the most part, we often recycle old ideas. It’s striking that if we look at the 1800s, people were sending messages via telegraph about what the future would look like if we all had this dashboard of buttons at our command where we could communicate with anyone and shop for anything. And that’s essentially what our smartphones became. We still have this dashboard menu approach. I think it means carefully considering what the right interface is for each situation.

[Back to top]

Several companies have reached out to you to learn from your expertise. What do they want to know?

Plotnick: I think there is a hunger out there from companies designing buttons or consumer technologies to try to understand the history of how we used to do things, how we might bring that to bear on the present, and what the future looks like with these interfaces. I’ve had a number of interesting discussions with companies, including one that manufactures push-button interfaces. I had a conversation with them about medical devices like CT machines and X-ray machines, trying to imagine the easiest way to push a button in that situation, to save people time and improve the patient encounter.

I’ve also talked to people about what will make someone use a defibrillator or not. Even though it’s really simple to go up to these automatic machines, if you see someone going into cardiac arrest in a mall or out on the street, a lot of people are terrified to actually push the button that would get this machine started. We had a really fascinating discussion about why someone wouldn’t push a button, and what would it take to get them to feel okay about doing that.

In all of these cases, these are design questions, but they’re also social and cultural questions. I like the idea that people who are in the humanities studying these things from a long-term perspective can also speak to engineers trying to build these devices.

So these companies also want to know about the history of buttons?

Plotnick: I’ve had some fascinating conversations around history. We all want to learn what mistakes not to make and what worked well in the past. There’s often this narrative of progress, that things are only getting better with technology over time. But if we look at these lessons, I think we can see that sometimes things were simpler or better in a past moment, and sometimes they were harder. Often with new technologies, we think we’re completely reinventing the wheel. But maybe these concepts existed a long time ago, and we haven’t paid attention to that. There’s a lot to be learned from the past.

[Back to top]

This is a sponsored article brought to you by BESydney.

In July 2024, Sydney woman Katherine Bennell-Pegg made history as the first astronaut to graduate under the Australian flag and the first female astronaut in Australia. Her journey, marked by determination and discipline, showcases Australia’s growing prominence in space exploration and research.

From her academic achievements at the University of Sydney (USYD) to her rigorous training at the European Space Agency (ESA), Bennell-Pegg’s success has paved a path forward for aspiring space and aerospace professionals in Australia and globally.

A journey to the stars begins in Sydney

Katherine Bennell-Pegg was born in Sydney, New South Wales, and grew up in the Northern Beaches area. Her fascination with space began at an early age.

“I always dreamed of being an astronaut,” Bennell-Pegg shared in her “Insights from an Australian Astronaut” Space Forum Speech in July 2024. “When I was young, it was for the adventure, but after more than a decade working in space, it’s now because I know the role it plays in tackling real-world problems and developing new knowledge that can benefit our society, environment and science.”

Sydney: A Hub for Space Innovation

Sydney, the vibrant heart of the state of New South Wales (NSW), stands at the forefront of aerospace innovation in Australia. With its world-class research facilities, leading academic institutions and strategic geographic positioning, Sydney is not only Australia’s gateway to the Indo-Pacific but also a burgeoning hub for international aerospace endeavours.

NSW is home to more than 40 per cent of Australia’s aerospace industry. Substantial investments from both the state and federal governments support this concentration of capabilities, underpinning Sydney’s role as a leader in aerospace. From advanced manufacturing and cybersecurity to quantum technologies and space exploration, this progressive city is truly thriving.

Sydney’s appeal as a desirable location for hosting aerospace conferences and business events is bolstered by its comprehensive infrastructure, vibrant startup community and strategic position as a transport hub.

Sydney’s track record of successfully hosting events highlights the city’s ability to organise impactful international gatherings, including:

• Australian Space Summit
• New Horizons Summit
• CubeSatPlus2024 - NEW SPACE: Unbounded Skies

Sydney will also host the 76th International Astronautical Congress from 29 September to 3 October 2025 and the 34th Congress of the International Council for the Aeronautical Sciences (ICAS) to be held 13 to 17 September 2026. Both will take place at ICC Sydney, further solidifying Sydney’s status as a central hub for aerospace events.

Would you like to know more about Sydney’s credentials in Aerospace? Download our Aerospace eBook or visit besydney.com.au

Sydney proved to be the ideal location for Bennell-Pegg’s journey to begin. She studied at the University of Sydney, where she earned a Bachelor of Engineering (Honors) in Aeronautical Engineering (Space) and a Bachelor of Science (Advanced) in Physics.

Sydney’s universities are at the forefront of aerospace education and research. Institutions such as the University of Sydney (USYD), the University of New South Wales (UNSW Sydney) and the University of Technology Sydney (UTS) attract students from around the world. UNSW Sydney, with its School of Aerospace, Mechanical, and Mechatronic Engineering, is renowned for its innovative research in space technology and satellite systems, while UTS provides cutting-edge programs in aerospace engineering and physics, emphasizing practical applications and industry partnerships. USYD excels in aeronautical engineering and space science, supported by advanced facilities and strong ties to major aerospace organisations. Together, these universities offer comprehensive programs that integrate theoretical knowledge with hands-on experience, preparing students for dynamic careers in the rapidly evolving aerospace and space sectors.

Having excelled in her studies at USYD, Bennell-Pegg was awarded the Charles Kuller Graduation Prize for her top-placed undergraduate thesis. Subsequently, her quest for knowledge took her to Europe, where she earned two Master of Science degrees: one in Astronautics and Space Engineering from Cranfield University and another in Space Technology from Luleå University of Technology.

Reflecting on her educational path, Bennell-Pegg stated, “With the encouragement of my parents, I researched what it would take to become an astronaut and worked hard at school, participating in everything from aerobatic flying lessons to amateur astronomy.”

Inside the rigorous training regimen of an astronaut

Bennell-Pegg’s professional career began with roles at Airbus UK, where she contributed to numerous space missions and concept studies, such as Martian in-situ resource utilisation and space debris removal. Her expertise led her to the Australian Space Agency, where she became the Director of Space Technology.

In 2021, Bennell-Pegg was invited by the European Space Agency (ESA) to undertake Basic Astronaut Training at the European Astronaut Centre in Germany. When the ESA application opened in 2021, it was the first opening in 15 years. Bennell-Pegg jumped at the opportunity to apply alongside over 22,000 others from 22 countries. She endured six knock-out rounds, including medical, psychometrics, psychology and technical tests and made it to the group of 25 who passed.

This historic invitation marked the first time an international astronaut candidate was offered training by the ESA.

“The training was demanding, but it was also an incredible opportunity to learn from some of the best minds in the field and to be part of a team that is pushing the boundaries of human exploration.”—Katherine Bennell-Pegg

Bennell-Pegg’s training regimen was intense, encompassing physical conditioning, complex simulations, and theoretical classes designed to prepare candidates for long-duration missions to the International Space Station (ISS) and beyond. This included:

• Studies in biology, astronomy, earth sciences, meteorology, materials, medical and fluids, both in theory and in labs.
• Radiation research – an area of expertise for Australia. This will increase as humans travel back to the Moon.
• Medical operations: Astronauts need to be able to perform medical procedures on themselves and others.
• Training for expeditions: This included honing team dynamics through behavioral training, ocean and winter survival training, rescue and firefighting.

Sharing her thoughts on this transformative experience, Bennell-Pegg said, “The training was demanding, but it was also an incredible opportunity to learn from some of the best minds in the field and to be part of a team that is pushing the boundaries of human exploration.”

In April 2024, Bennell-Pegg completed her training, graduating with her ESA classmates from “The Hoppers” group. Upon graduation, she became fully qualified for assignments on long-duration missions to the ISS, making her the first Australian female astronaut and the first person to train as an astronaut under the Australian flag.

“I want to use this experience to open doors for Australian scientists and engineers to utilize space for their discoveries,” Bennell-Pegg said. “I hope to inspire the pursuit of STEM careers and show all Australians that they too can reach for the stars.”

Elevating Australia’s role in space exploration

Katherine Bennell-Pegg’s achievements represent a significant milestone. Her journey from the University of Sydney to the rigorous training programs at the European Astronaut Centre showcases the potential of Australian talent in the global space community.

“Being the first astronaut trained under the Australian flag is an incredible honor,” Bennell-Pegg said. “I’m grateful for the support that has fueled me through intense training and opened doors for more Australians in space exploration. Whether I fly or not, there is much to accomplish here on Earth. I’m excited to leverage this experience to inspire future generations in STEM and elevate Australia’s presence in the global space community. Becoming an astronaut is just the beginning.”

Bennell-Pegg’s dream to become an Australian astronaut is more than just a personal triumph; it is a win for anyone who aspires to a career in space or aerospace. Sydney, with its world-class educational institutions, advanced manufacturing facilities scheduled for the Western Sydney Aerotropolis and expanding opportunities in aerospace and defence, is an ideal starting point for anyone looking to make their mark in these sectors.

Would you like to know more about Sydney’s credentials in Aerospace? Download our Aerospace eBook or visit besydney.com.au

Boston Dynamics is the master of dropping amazing robot videos with no warning, and last week, we got a surprise look at the new electric Atlas going “hands on” with a practical factory task.

This video is notable because it’s the first real look we’ve had at the new Atlas doing something useful—or doing anything at all, really, as the introductory video from back in April (the first time we saw the robot) was less than a minute long. And the amount of progress that Boston Dynamics has made is immediately obvious, with the video showing a blend of autonomous perception, full body motion, and manipulation in a practical task.

We sent over some quick questions as soon as we saw the video, and we’ve got some extra detail from Scott Kuindersma, senior director of Robotics Research at Boston Dynamics.

If you haven’t seen this video yet, what kind of robotics person are you, and also here you go:

Atlas is autonomously moving engine covers between supplier containers and a mobile sequencing dolly. The robot receives as input a list of bin locations to move parts between.

Atlas uses a machine learning (ML) vision model to detect and localize the environment fixtures and individual bins [0:36]. The robot uses a specialized grasping policy and continuously estimates the state of manipulated objects to achieve the task.

There are no prescribed or teleoperated movements; all motions are generated autonomously online. The robot is able to detect and react to changes in the environment (e.g., moving fixtures) and action failures (e.g., failure to insert the cover, tripping, environment collisions [1:24]) using a combination of vision, force, and proprioceptive sensors.

Eagle-eyed viewers will have noticed that this task is very similar to what we saw hydraulic Atlas (Atlas classic?) working on just before it retired. We probably don’t need to read too much into the differences between how each robot performs that task, but it’s an interesting comparison to make.

For more details, here’s our Q&A with Kuindersma:

How many takes did this take?

Kuindersma: We ran this sequence a couple times that day, but typically we’re always filming as we continue developing and testing Atlas. Today we’re able to run that engine cover demo with high reliability, and we’re working to expand the scope and duration of tasks like these.

Is this a task that humans currently do?

Kuindersma: Yes.

What kind of world knowledge does Atlas have while doing this task?

Kuindersma: The robot has access to a CAD model of the engine cover that is used for object pose prediction from RGB images. Fixtures are represented more abstractly using a learned keypoint prediction model. The robot builds a map of the workcell at startup which is updated on the fly when changes are detected (e.g., moving fixture).

Does Atlas’s torso have a front or back in a meaningful way when it comes to how it operates?

Kuindersma: Its head/torso/pelvis/legs do have “forward” and “backward” directions, but the robot is able to rotate all of these relative to one another. The robot always knows which way is which, but sometimes the humans watching lose track.

Are the head and torso capable of unlimited rotation?

Kuindersma: Yes, many of Atlas’s joints are continuous.

How long did it take you folks to get used to the way Atlas moves?

Kuindersma: Atlas’s motions still surprise and delight the team.

OSHA recommends against squatting because it can lead to workplace injuries. How does Atlas feel about that?

Kuindersma: As might be evident by some of Atlas’s other motions, the kinds of behaviors that might be injurious for humans might be perfectly fine for robots.

Can you describe exactly what process Atlas goes through at 1:22?

Kuindersma: The engine cover gets caught on the fabric bins and triggers a learned failure detector on the robot. Right now this transitions into a general-purpose recovery controller, which results in a somewhat jarring motion (we will improve this). After recovery, the robot retries the insertion using visual feedback to estimate the state of both the part and fixture.

Were there other costume options you considered before going with the hot dog?

Kuindersma: Yes, but marketing wants to save them for next year.

How many important sensors does the hot dog costume occlude?

Kuindersma: None. The robot is using cameras in the head, proprioceptive sensors, IMU, and force sensors in the wrists and feet. We did have to cut the costume at the top so the head could still spin around.

Why are pickles always causing problems?

Kuindersma: Because pickles are pesky, polarizing pests.

Like many innovators, Hagit Messer-Yaron had a life-changing idea while doing something mundane: Talking with a colleague over a cup of coffee. The IEEE Life Fellow, who in 2006 was head of Tel Aviv University’s Porter School of Environmental Studies, was at the school’s cafeteria with a meteorological researcher. He shared his struggles with finding high-resolution weather data for his climate models, which are used to forecast and track flash floods.

Predicting floods is crucial for quickly evacuating residents in affected areas and protecting homes and businesses against damage.

Hagit Messer-Yaron

Employer Tel Aviv University

Title Professor emerita

Member grade Life Fellow

Her colleague “said researchers in the field had limited measurements because the equipment meteorologists used to collect weather data—including radar satellites—is expensive to purchase and maintain, especially in developing countries,” Messer-Yaron says.

Because of that, she says, high-resolution data about temperature, air quality, wind speed, and precipitation levels is often inconsistent—which is a problem when trying to produce accurate models and predictions.

An expert in signal processing and cellular communication, Messer-Yaron came up with the idea of using existing wireless communication signals to collect weather data, as communication networks are spread across the globe.

In 2006 she and her research team developed algorithms that process and analyze data collected by communication networks to monitor rainfall. They measure the difference in amplitude of the signals transmitted and received by the systems to extract data needed to predict flash floods.

The method was first demonstrated in Israel. Messer-Yaron is working to integrate it into communication networks worldwide.

For her work, she received this year’s IEEE Medal for Environmental and Safety Technologies for “contributions to sensing of the environment using wireless communication networks.” The award is sponsored by Toyota.

“Receiving an IEEE medal, which is the highest-level award you can get within the organization, was really a surprise, and I was extremely happy to [receive] it,” she says. “I was proud that IEEE was able to evaluate and see the potential in our technology for public good and to reward it.”

A passion for teaching

Growing up in Israel, Messer-Yaron was interested in art, literature, and science. When it came time to choose a career, she found it difficult to decide, she says. Ultimately, she chose electrical engineering, figuring it would be easier to enjoy art and literature as hobbies.

After completing her mandatory service in the Israel Defense Forces in 1973, she began her undergraduate studies at Tel Aviv University, where she found her passion: Signal processing.

“Electrical engineering is a very broad topic,” she says. “As an undergrad, you learn all the parts that make up electrical engineering, including applied physics and applied mathematics. I really enjoyed applied mathematics and soon discovered signal processing. I found it quite amazing how, by using algorithms, you can direct signals to extract information.”

She graduated with a bachelor’s degree in EE in 1977 and continued her education there, earning master’s and doctoral degrees in 1979 and 1984. She moved to the United States for a postdoctoral position at Yale. There she worked with IEEE Life Fellow Peter Schultheiss, who was known for his research in using sensor array systems in underwater acoustics.

Inspired by Schultheiss’s passion for teaching, Messer-Yaron decided to pursue a career in academia. She was hired by Tel Aviv University as an electrical engineering professor in 1986. She was the first woman in Israel to become a full professor in the subject.

“Being a faculty member at a public university is the best job you can do. I didn’t make a lot of money, but at the end of each day, I looked back at what I did [with pride].”

For the next 14 years, she conducted research in statistical signal processing, time-delay estimation, and sensor array processing.

Her passion for teaching took her around the world as a visiting professor at Yale, the New Jersey Institute of Technology, the Institut Polytechnique de Paris, and other schools. She collaborated with colleagues from the universities on research projects.

In 1999 she was promoted to director of Tel Aviv University’s undergraduate electrical engineering program.

A year later, she was offered an opportunity she couldn’t refuse: Serving as chief scientist for the Israeli Ministry of Science, Culture, and Sports. She took a sabbatical from teaching and for the next three years oversaw the country’s science policy.

“I believe [working in the public sector] is part of our duty as faculty members, especially in public universities, because that makes you a public intellectual,” she says. “Working for the government gave me a broad view of many things that you don’t see as a professor, even in a large university.”

When she returned to the university in 2004, Messer-Yaron was appointed as the director of the new school of environmental studies. She oversaw the allocation of research funding and spoke with researchers individually to better understand their needs. After having coffee with one researcher, she realized there was a need to develop better weather-monitoring technology.

Hagit Messer-Yaron proudly displays her IEEE Medal for Environmental and Safety Technologies at this year’s IEEE Honors Ceremony. She is accompanied by IEEE President-Elect Kathleen Kramer and IEEE President Tom Couglin.Robb Cohen

Using signal processing to monitor weather

Because the planet is warming, the risk of flash floods is steadily increasing. Warmer air holds more water—which leads to heavier-than-usual rainfall and results in more flooding, according to the U.S. Environmental Protection Agency.

Data about rainfall is typically collected by satellite radar and ground-based rain gauges. However, radar images don’t provide researchers with precise readings of what’s happening on the ground, according to an Ensia article. Rain gauges are accurate but provide data from small areas only.

So Messer-Yaron set her sights on developing technology that connects to cellular networks close to the ground to provide more accurate measurements, she says. Using existing infrastructure eliminates the need to build new weather radars and weather stations.

Communication systems automatically record the transmitted signal level and the received signal level, but rain can alter otherwise smooth wave patterns. By measuring the difference in the amplitude, meteorologists could extract the data necessary to track rainfall using the signal processing algorithms.

In 2005 Messer-Yaron and her group successfully tested the technology. The following year, their “Environmental Monitoring by Wireless Communication Networks” paper was published in Science.

The algorithm is being used in Israel in partnership with all three of the country’s major cellular service providers. Messer-Yaron acknowledges, however, that negotiating deals with cellular service companies in other countries has been difficult.

To expand the technology’s use worldwide, Messer-Yaron launched a research network through the European Cooperation in Science and Technology (COST), called an opportunistic precipitation sensing network known as OPENSENSE. The group connects researchers, meteorologists, and other experts around the world to collaborate on integrating the technology in members’ communities.

Monitoring the effects of climate change

Since developing the technology, Messer-Yaron has held a number of jobs including president of the Open University of Israel and vice chair of the country’s Council for Higher Education, which accredits academic institutions.

She is maintaining her link with Tel Aviv University today as a professor emerita.

“Being a faculty member at a public university is the best job you can do,” she says. “I didn’t make a lot of money, but at the end of each day, I looked back at what I did [with pride]. Because of the academic freedom and the autonomy I had, I was able to do many things in addition to teaching, including research.”

To continue her work in developing technology to monitor weather events, in 2016, she helped found ClimaCell, now Tomorrow.io, based in Boston. The startup aims to use wireless communication infrastructure and IoT devices to collect real-time weather data. Messer-Yaron served as its chief scientist until 2017.

She continues to update the original algorithms with her students, most recently with machine learning capabilities to extract data from physical measurements of the signal level in communication networks.

A global engineering community

When Messer-Yaron was an undergraduate student, she joined IEEE at the suggestion of one of her professors.

“I didn’t think much about the benefits of being a member until I became a graduate student,” she says. “I started attending conferences and publishing papers in IEEE journals, and the organization became my professional community.”

She is an active volunteer and a member of the IEEE Signal Processing Society. From 1994 to 2010 she served on the society’s Signal Processing Theory and Methods technical committee. She was associate editor of IEEE Signal Processing Letters and IEEE Transactions on Signal Processing. She is a member of the editorial boards of the IEEE Journal of Selected Topics in Signal Processing and IEEE Transactions on Signal Processing.

In the past 10 years, she’s been involved with other IEEE committees including the conduct review, ethics and member conduct, and global public policy bodies.

“I don’t see my career or my professional life without the IEEE,” she says

Research expeditions conducted at sea using a rotating gravity machine and microscope found that the Earth’s oceans may not be absorbing as much carbon as researchers have long thought.

Oceans are believed to absorb roughly 26 percent of global carbon dioxide emissions by drawing down CO₂ from the atmosphere and locking it away. In this system, CO₂ enters the ocean, where phytoplankton and other organisms consume about 70 percent of it. When these organisms eventually die, their soft, small structures sink to the bottom of the ocean in what looks like an underwater snowfall.

This “marine snow” pulls carbon away from the surface of the ocean and sequesters it in the depths for millennia, which enables the surface waters to draw down more CO₂ from the air. It’s one of Earth’s best natural carbon-removal systems. It’s so effective at keeping atmospheric CO₂ levels in check that many research groups are trying to enhance the process with geoengineering techniques.

But the new study, published on 11 October in Science, found that the sinking particles don’t fall to the ocean floor as quickly as researchers thought. Using a custom gravity machine that simulated marine snow’s native environment, the study’s authors observed that the particles produce mucus tails that act like parachutes, putting the brakes on their descent—sometimes even bringing them to a standstill.

The physical drag leaves carbon lingering in the upper hydrosphere, rather than being safely sequestered in deeper waters. Living organisms can then consume the marine snow particles and respire their carbon back into the sea. Ultimately, this impedes the rate at which the ocean draws down and sequesters additional CO₂ from the air.

The implications are grim: Scientists’ best estimates of how much CO₂ the Earth’s oceans sequester could be way off. “We’re talking roughly hundreds of gigatonnes of discrepancy if you don’t include these marine snow tails,” says Manu Prakash, a bioengineer at Stanford University and one of the paper’s authors. The work was conducted by researchers at Stanford, Rutgers University in New Jersey, and Woods Hole Oceanographic Institution in Massachusetts.

Oceans Absorb Less CO₂ Than Expected

Researchers for years have been developing numerical models to estimate marine carbon sequestration. Those models will need to be adjusted for the slower sinking speed of marine snow, Prakash says.

The findings also have implications for startups in the fledgling marine carbon geoengineering field. These companies use techniques such as ocean alkalinity enhancement to augment the ocean’s ability to sequester carbon. Their success depends, in part, on using numerical models to prove to investors and the public that their techniques work. But their estimates are only as good as the models they use, and the scientific community’s confidence in them.

“We’re talking roughly hundreds of gigatonnes of discrepancy if you don’t include these marine snow tails.” —Manu Prakash, Stanford University

The Stanford researchers made the discovery on an expedition off the coast of Maine. There, they collected marine samples by hanging traps from their boat 80 meters deep. After pulling up a sample, the researchers quickly analyzed the contents while still on board the ship using their wheel-shaped machine and microscope.

The researchers built a microscope with a spinning wheel that simulates marine snow falling through sea water over longer distances than would otherwise be practical.Prakash Lab/Stanford

The device simulates the organisms’ vertical travel over long distances. Samples go into a wheel about the size of a vintage film reel. The wheel spins constantly, allowing suspended marine-snow particles to sink while a camera captures their every move.

The apparatus adjusts for temperature, light, and pressure to emulate marine conditions. Computational tools assess flow around the sinking particles and custom software removes noise in the data from the ship’s vibrations. To accommodate for the tilt and roll of the ship, the researchers mounted the device on a two-axis gimbal.

Slower Marine Snow Reduces Carbon Sequestration

With this setup, the team observed that sinking marine snow generates an invisible halo-shaped comet tail made of viscoelastic transparent exopolymer—a mucus-like parachute. They discovered the invisible tail by adding small beads to the seawater sample in the wheel, and analyzing the way they flowed around the marine snow. “We found that the beads were stuck in something invisible trailing behind the sinking particles,” says Rahul Chajwa, a bioengineering postdoctoral fellow at Stanford.

The tail introduces drag and buoyancy, doubling the amount of time marine snow spends in the upper 100 meters of the ocean, the researchers concluded. “This is the sedimentation law we should be following,” says Prakash, who hopes to get the results into climate models.

The study will likely help models project carbon export—the process of transporting CO₂ from the atmosphere to the deep ocean, says Lennart Bach, a marine biochemist at the University of Tasmania in Australia, who was not involved with the research. “The methodology they developed is very exciting and it’s great to see new methods coming into this research field,” he says.

But Bach cautions against extrapolating the results too far. “I don’t think the study will change the numbers on carbon export as we know them right now,” because these numbers are derived from empirical methods that would have unknowingly included the effects of the mucus tail, he says.

Marine snow may be slowed by “parachutes” of mucus while sinking, potentially lowering the rate at which the global ocean can sequester carbon in the depths.Prakash Lab/Stanford

Prakash and his team came up with the idea for the microscope while conducting research on a human parasite that can travel dozens of meters. “We would make 5- to 10-meter-tall microscopes, and one day, while packing for a trip to Madagascar, I had this ‘aha’ moment,” says Prakash. “I was like: Why are we packing all these tubes? What if the two ends of these tubes were connected?”

The group turned their linear tube into a closed circular channel—a hamster wheel approach to observing microscopic particles. Over five expeditions at sea, the team further refined the microscope’s design and fluid mechanics to accommodate marine samples, often tackling the engineering while on the boat and adjusting for flooding and high seas.

In addition to the sedimentation physics of marine snow, the team also studies other plankton that may affect climate and carbon-cycle models. On a recent expedition off the coast of Northern California, the group discovered a cell with silica ballast that makes marine snow sink like a rock, Prakash says.

The crafty gravity machine is one of Prakash’s many frugal inventions, which include an origami-inspired paper microscope, or “foldscope,” that can be attached to a smartphone, and a paper-and-string biomedical centrifuge dubbed a “paperfuge.”

Last week the organization tasked with running the the biggest chunk of U.S. CHIPS Act’s US $13 billion R&D program made some significant strides: The National Semiconductor Technology Center (NSTC) released a strategic plan and selected the sites of two of three planned facilities and released a new strategic plan. The locations of the two sites—a “design and collaboration” center in Sunnyvale, Calif., and a lab devoted to advancing the leading edge of chipmaking, in Albany, N.Y.—build on an existing ecosystem at each location, experts say. The location of the third planned center—a chip prototyping and packaging site that could be especially critical for speeding semiconductor startups—is still a matter of speculation.

“The NSTC represents a once-in-a-generation opportunity for the U.S. to accelerate the pace of innovation in semiconductor technology,” Deirdre Hanford, CEO of Natcast, the nonprofit that runs the NSTC centers, said in a statement. According to the strategic plan, which covers 2025 to 2027, the NSTC is meant to accomplish three goals: extend U.S. technology leadership, reduce the time and cost to prototype, and build and sustain a semiconductor workforce development ecosystem. The three centers are meant to do a mix of all three.

New York gets extreme ultraviolet lithography

NSTC plans to direct $825 million into the Albany project. The site will be dedicated to extreme ultraviolet lithography, a technology that’s essential to making the most advanced logic chips. The Albany Nanotech Complex, which has already seen more than $25 billion in investments from the state and industry partners over two decades, will form the heart of the future NSTC center. It already has an EUV lithography machine on site and has begun an expansion to install a next-generation version, called high-NA EUV, which promises to produce even finer chip features. Working with a tool recently installed in Europe, IBM, a long-time tenant of the Albany research facility, reported record yields of copper interconnects built every 21 nanometers, a pitch several nanometers tighter than possible with ordinary EUV.

“It’s fulfilling to see that this ecosystem can be taken to the national and global level through CHIPS Act funding,” said Mukesh Khare, general manager of IBM’s semiconductors division, speaking from the future site of the NSTC EUV center. “It’s the right time, and we have all the ingredients.”

While only a few companies are capable of manufacturing cutting edge logic using EUV, the impact of the NSTC center will be much broader, Khare argues. It will extend down as far as early-stage startups with ideas or materials for improving the chipmaking process “An EUV R&D center doesn’t mean just one machine,” says Khare. “It needs so many machines around it… It’s a very large ecosystem.”

Silicon Valley lands the design center

The design center is tasked with conducting advanced research in chip design, electronic design automation (EDA), chip and system architectures, and hardware security. It will also host the NSTC’s design enablement gateway—a program that provides NSTC members with a secure, cloud-based access to design tools, reference processes and designs, and shared data sets, with the goal of reducing the time and cost of design. Additionally, it will house workforce development, member convening, and administration functions.

Situating the design center in Silicon Valley, with its concentration of research universities, venture capital, and workforce, seems like the obvious choice to many experts. “I can’t think of a better place,” says Patrick Soheili, co-founder of interconnect technology startup Eliyan, which is based in Santa Clara, Calif.

Abhijeet Chakraborty, vice president of engineering in the technology and product group at Silicon Valley-based Synopsys, a leading maker of EDA software, sees Silicon Valley’s expansive tech ecosystem as one of its main advantages in landing the NSTC’s design center. The region concentrates companies and researchers involved in the whole spectrum of the industry from semiconductor process technology to cloud software.

Access to such a broad range of industries is increasingly important for chip design startups, he says. “To design a chip or component these days you need to go from concept to design to validation in an environment that takes care of the entire stack,” he says. It’s prohibitively expensive for a startup to do that alone, so one of Chakraborty’s hopes for the design center is that it will help startups access the design kits and other data needed to operate in this new environment.

Packaging and prototyping still to come

A third promised center for prototyping and packaging is still to come. “The big question is where does the packaging and prototyping go?” says Mark Granahan, cofounder and CEO of Pennsylvania-based power semiconductor startup Ideal Semiconductor. “To me that’s a great opportunity.” He points out that because there is so little packaging technology infrastructure in the United States, any ambitious state or region should have a shot at hosting such a center. One of the original intentions of the act, after all, was to expand the number of regions of the country that are involved in the semiconductor industry.

But that hasn’t stopped some already tech-heavy regions from wanting it. “Oregon offers the strongest ecosystem for such a facility,” a spokesperson for Intel, whose technology development is done there. “The state is uniquely positioned to contribute to the success of the NSTC and help drive technological advancements in the U.S. semiconductor industry.”

As NSTC makes progress, Granahan’s concern is that bureaucracy will expand with it and slow efforts to boost the U.S. chip industry. Already the layers of control are multiplying. The Chips Office at the National Institute of Standards and Technology executes the Act. The NSTC is administered by the nonprofit Natcast, which directs the EUV center, which is in a facility run by another nonprofit, NY CREATES. “We want these things to be agile and make local decisions.”

EPICS in IEEE, a service learning program for university students supported by IEEE Educational Activities, offers students opportunities to engage with engineering professionals and mentors, local organizations, and technological innovation to address community-based issues.

The following two environmentally focused projects demonstrate the value of teamwork and direct involvement with project stakeholders. One uses smart biodigesters to better manage waste in Colombia’s rural areas. The other is focused on helping Turkish olive farmers protect their trees from climate change effects by providing them with a warning system that can identify growing problems.

No time to waste in rural Colombia

Proper waste management is critical to a community’s living conditions. In rural La Vega, Colombia, the lack of an effective system has led to contaminated soil and water, an especially concerning issue because the town’s economy relies heavily on agriculture.

The Smart Biodigesters for a Better Environment in Rural Areas project brought students together to devise a solution.

Vivian Estefanía Beltrán, a Ph.D. student at the Universidad del Rosario in Bogotá, addressed the problem by building a low-cost anaerobic digester that uses an instrumentation system to break down microorganisms into biodegradable material. It reduces the amount of solid waste, and the digesters can produce biogas, which can be used to generate electricity.

“Anaerobic digestion is a natural biological process that converts organic matter into two valuable products: biogas and nutrient-rich soil amendments in the form of digestate,” Beltrán says. “As a by-product of our digester’s operation, digestate is organic matter that can’t be transferred into biogas but can be used as a soil amendment for our farmers’ crops, such as coffee.

“While it may sound easy, the process is influenced by a lot of variables. The support we’ve received from EPICS in IEEE is important because it enables us to measure these variables, such as pH levels, temperature of the reactor, and biogas composition [methane and hydrogen sulfide]. The system allows us to make informed decisions that enhance the safety, quality, and efficiency of the process for the benefit of the community.”

The project was a collaborative effort among Universidad del Rosario students, a team of engineering students from Escuela Tecnológica Instituto Técnico Central, Professor Carlos Felipe Vergara, and members of Junta de Acción Comunal (Vereda La Granja), which aims to help residents improve their community.

“It’s been a great experience to see how individuals pursuing different fields of study—from engineering to electronics and computer science—can all work and learn together on a project that will have a direct positive impact on a community.” —Vivian Estefanía Beltrán

Beltrán worked closely with eight undergraduate students and three instructors—Maria Fernanda Gómez, Andrés Pérez Gordillo (the instrumentation group leader), and Carlos Felipe Vergara-Ramirez—as well as IEEE Graduate Student Member Nicolás Castiblanco (the instrumentation group coordinator).

The team constructed and installed their anaerobic digester system in an experimental station in La Vega, a town located roughly 53 kilometers northwest of Bogotá.

“This digester is an important innovation for the residents of La Vega, as it will hopefully offer a productive way to utilize the residual biomass they produce to improve quality of life and boost the economy,” Beltrán says. Soon, she adds, the system will be expanded to incorporate high-tech sensors that automatically monitor biogas production and the digestion process.

“For our students and team members, it’s been a great experience to see how individuals pursuing different fields of study—from engineering to electronics and computer science—can all work and learn together on a project that will have a direct positive impact on a community. It enables all of us to apply our classroom skills to reality,” she says. “The funding we’ve received from EPICS in IEEE has been crucial to designing, proving, and installing the system.”

The project also aims to support the development of a circular economy, which reuses materials to enhance the community’s sustainability and self-sufficiency.

Protecting olive groves in Türkiye

Türkiye is one of the world’s leading producers of olives, but the industry has been challenged in recent years by unprecedented floods, droughts, and other destructive forces of nature resulting from climate change. To help farmers in the western part of the country monitor the health of their olive trees, a team of students from Istanbul Technical University developed an early-warning system to identify irregularities including abnormal growth.

“Almost no olives were produced last year using traditional methods, due to climate conditions and unusual weather patterns,” says Tayfun Akgül, project leader of the Smart Monitoring of Fruit Trees in Western Türkiye initiative.

“Our system will give farmers feedback from each tree so that actions can be taken in advance to improve the yield,” says Akgül, an IEEE senior member and a professor in the university’s electronics and communication engineering department.

“We’re developing deep-learning techniques to detect changes in olive trees and their fruit so that farmers and landowners can take all necessary measures to avoid a low or damaged harvest,” says project coordinator Melike Girgin, a Ph.D. student at the university and an IEEE graduate student member.

Using drones outfitted with 360-degree optical and thermal cameras, the team collects optical, thermal, and hyperspectral imaging data through aerial methods. The information is fed into a cloud-based, open-source database system.

Akgül leads the project and teaches the team skills including signal and image processing and data collection. He says regular communication with community-based stakeholders has been critical to the project’s success.

“There are several farmers in the village who have helped us direct our drone activities to the right locations,” he says. “Their involvement in the project has been instrumental in helping us refine our process for greater effectiveness.

“For students, classroom instruction is straightforward, then they take an exam at the end. But through our EPICS project, students are continuously interacting with farmers in a hands-on, practical way and can see the results of their efforts in real time.”

Looking ahead, the team is excited about expanding the project to encompass other fruits besides olives. The team also intends to apply for a travel grant from IEEE in hopes of presenting its work at a conference.

“We’re so grateful to EPICS in IEEE for this opportunity,” Girgin says. “Our project and some of the technology we required wouldn’t have been possible without the funding we received.”

A purpose-driven partnership

The IEEE Standards Association sponsored both of the proactive environmental projects.

“Technical projects play a crucial role in advancing innovation and ensuring interoperability across various industries,” says Munir Mohammed, IEEE SA senior manager of product development and market engagement. “These projects not only align with our technical standards but also drive technological progress, enhance global collaboration, and ultimately improve the quality of life for communities worldwide.”

For more information on the program or to participate in service-learning projects, visit EPICS in IEEE.

On 7 November, this article was updated from an earlier version.

Azerbaijan next week will garner much of the attention of the climate tech world, and not just because it will host COP29, the United Nation’s giant annual climate change conference. The country is promoting a grand, multi-nation plan to generate renewable electricity in the Caucasus region and send it thousands of kilometers west, under the Black Sea, and into energy–hungry Europe.

The transcontinental connection would start with wind, solar, and hydropower generated in Azerbaijan and Georgia, and off-shore wind power generated in the Caspian Sea. Long-distance lines would carry up to 1.5 gigawatts of clean electricity to Anaklia, Georgia, at the east end of the Black Sea. An undersea cable would move the electricity across the Black Sea and deliver it to Constanta, Romania, where it could be distributed further into Europe.

The scheme’s proponents say this Caspian-Black Sea energy corridor will help decrease global carbon emissions, provide dependable power to Europe, modernize developing economies at Europe’s periphery, and stabilize a region shaken by war. Organizers hope to build the undersea cable within the next six years at an estimated cost of €3.5 billion (US $3.8 billion).

To accomplish this, the governments of the involved countries must quickly circumvent a series of technical, financial, and political obstacles. “It’s a huge project,” says Zviad Gachechiladze, a director at Georgian State Electrosystem, the agency that operates the country’s electrical grid, and one of the architects of the Caucasus green-energy corridor. “To put it in operation [by 2030]—that’s quite ambitious, even optimistic,” he says.

Black Sea Cable to Link Caucasus and Europe

The technical lynchpin of the plan falls on the successful construction of a high voltage direct current (HVDC) submarine cable in the Black Sea. It’s a formidable task, considering that it would stretch across nearly 1,200 kilometers of water, most of which is over 2 km deep, and, since Russia’s invasion of Ukraine, littered with floating mines. By contrast, the longest existing submarine power cable—the North Sea Link—carries 1.4 GW across 720 km between England and Norway, at depths of up to 700 meters.

As ambitious as Azerbaijan’s plans sound, longer undersea connections have been proposed. The Australia-Asia PowerLink project aims to produce 6 GW at a vast solar farm in Northern Australia and send about a third of it to Singapore via a 4,300-km undersea cable. The Morocco-U.K. Power Project would send 3.6 GW over 3,800 km from Morocco to England. A similar attempt by Desertec to send electricity from North Africa to Europe ultimately failed.

Building such cables involves laying and stitching together lengths of heavy submarine power cables from specialized ships—the expertise for which lies with just two companies in the world. In an assessment of the Black Sea project’s feasibility, the Milan-based consulting and engineering firm CESI determined that the undersea cable could indeed be built, and estimated that it could carry up to 1.5 GW—enough to supply over 2 million European households.

But to fill that pipe, countries in the Caucasus region would have to generate much more green electricity. For Georgia, that will mostly come from hydropower, which already generates over 80 percent of the nation’s electricity. “We are a hydro country. We have a lot of untapped hydro potential,” says Gachechiladze.

Azerbaijan and Georgia Plan Green Energy Corridor

Generating hydropower can also generate opposition, because of the way dams alter rivers and landscapes. “There were some cases when investors were not able to construct power plants because of opposition of locals or green parties” in Georgia, says Salome Janelidze, a board member at the Energy Training Center, a Georgian government agency that promotes and educates around the country’s energy sector.

“It was definitely a problem and it has not been totally solved,” says Janelidze. But “to me it seems it is doable,” she says. “You can procure and construct if you work closely with the local population and see them as allies rather than adversaries.”

For Azerbaijan, most of the electricity would be generated by wind and solar farms funded by foreign investment. Masdar, the renewable-energy developer of the United Arab Emirates government, has been investing heavily in wind power in the country. In June, the company broke ground on a trio of wind and solar projects with 1 GW capacity. It intends to develop up to 9 GW more in Azerbaijan by 2030. ACWA Power, a Saudi power-generation company, plans to complete a 240-MW solar plant in the Absheron and Khizi districts of Azerbaijan next year and has struck a deal with the Azerbaijani Ministry of Energy to install up to 2.5 GW of offshore and onshore wind.

CESI is currently running a second study to gauge the practicality of the full breadth of the proposed energy corridor—from the Caspian Sea to Europe—with a transmission capacity of 4 to 6 GW. But that beefier interconnection will likely remain out of reach in the near term. “By 2030, we can’t claim our region will provide 4 GW or 6 GW,” says Gachechiladze. “1.3 is realistic.”

COP29: Azerbaijan’s Renewable Energy Push

Signs of political support have surfaced. In September, Azerbaijan, Georgia, Romania, and Hungary created a joint venture, based in Romania, to shepherd the project. Those four countries in 2022 inked a memorandum of understanding with the European Union to develop the energy corridor.

The involved countries are in the process of applying for the cable to be selected as an EU “project of mutual interest,” making it an infrastructure priority for connecting the union with its neighbors. If selected, “the project could qualify for 50 percent grant financing,” says Gachechiladze. “It’s a huge budget. It will improve drastically the financial condition of the project.” The commissioner responsible for EU enlargement policy projected that the union would pay an estimated €2.3 billion ($2.5 billion) toward building the cable.

Whether next week’s COP29, held in Baku, Azerbaijan, will help move the plan forward remains to be seen. In preparation for the conference, advocates of the energy corridor have been taking international journalists on tours of the country’s energy infrastructure.

Looming over the project are the security issues threaten to thwart it. Shipping routes in the Black Sea have become less dependable and safe since Russia’s invasion of Ukraine. To the south, tensions between Armenia and Azerbaijan remain after the recent war and ethnic violence.

In order to improve relations, many advocates of the energy corridor would like to include Armenia. “The cable project is in the interests of Georgia, it’s in the interests of Armenia, it’s in the interests of Azerbaijan,” says Agha Bayramov, an energy geopolitics researcher at the University of Groningen, in the Netherlands. “It might increase the chance of them living peacefully together. Maybe they’ll say, ‘We’re responsible for European energy. Let’s put our egos aside.’”

In 6G telecom research today, a crucial portion of wireless spectrum has been neglected: the Frequency Range 3, or FR3, band. The shortcoming is partly due to a lack of viable software and hardware platforms for studying this region of spectrum, ranging from approximately 6 to 24 gigahertz. But a new, open-source wireless research kit is changing that equation. And research conducted using that kit, presented last week at a leading industry conference, offers proof of viability of this spectrum band for future 6G networks.

In fact, it’s also arguably signaling a moment of telecom industry re-evaluation. The high-bandwidth 6G future, according to these folks, may not be entirely centered around difficult millimeter wave-based technologies. Instead, 6G may leave plenty of room for higher-bandwidth microwave spectrum tech that is ultimately more familiar and accessible.

The FR3 band is a region of microwave spectrum just shy of millimeter-wave frequencies (30 to 300 GHz). FR3 is also already very popular today for satellite Internet and military communications. For future 5G and 6G networks to share the FR3 band with incumbent players would require telecom networks nimble enough to perform regular, rapid-response spectrum-hopping.

Yet spectrum-hopping might still be an easier problem to solve than those posed by the inherent physical shortcomings of some portions of millimeter-wave spectrum—shortcomings that include limited range, poor penetration, line-of-sight operations, higher power requirements, and susceptibility to weather.

Pi-Radio’s New Face

Earlier this year, the Brooklyn, N.Y.-based startup Pi-Radio—a spinoff from New York University’s Tandon School of Engineering—released a wireless spectrum hardware and software kit for telecom research and development. Pi-Radio’s FR-3 is a software-defined radio system developed for the FR3 band specifically, says company co-founder Sundeep Rangan.

“Software-defined radio is basically a programmable platform to experiment and build any type of wireless technology,” says Rangan, who is also the associate director of NYU Wireless. “In the early stages when developing systems, all researchers need these.”

For instance, the Pi-Radio team presented one new research finding that infers direction to an FR3 antenna from measurements taken by a mobile Pi-Radio receiver—presented at the IEEE Signal Processing Society‘s Asilomar Conference on Signals, Systems and Computers in Pacific Grove, Calif. on 30 October.

According to Pi-Radio co-founder Marco Mezzavilla, who’s also an associate professor at the Polytechnic University of Milan, the early-stage FR3 research that the team presented at Asilomar will enable researchers “to capture [signal] propagation in these frequencies and will allow us to characterize it, understand it, and model it... And this is the first stepping stone towards designing future wireless systems at these frequencies.”

There’s a good reason researchers have recently rediscovered FR3, says Paolo Testolina, postdoctoral research fellow at Northeastern University’s Institute for the Wireless Internet of Things unaffiliated with the current research effort. “The current scarcity of spectrum for communications is driving operators and researchers to look in this band, where they believe it is possible to coexist with the current incumbents,” he says. “Spectrum sharing will be key in this band.”

Rangan notes that the work on which Pi-Radio was built has been published earlier this year both on the more foundational aspects of building networks in the FR3 band as well as the specific implementation of Pi-Radio’s unique, frequency-hopping research platform for future wireless networks. (Both papers were published in IEEE journals.)

“If you have frequency hopping, that means you can get systems that are resilient to blockage,” Rangan says. “But even, potentially, if it was attacked or compromised in any other way, this could actually open up a new type of dimension that we typically haven’t had in the cellular infrastructure.” The frequency-hopping that FR3 requires for wireless communications, in other words, could introduce a layer of hack-proofing that might potentially strengthen the overall network.

Complement, Not Replacement

The Pi-Radio team stresses, however, that FR3 would not supplant or supersede other new segments of wireless spectrum. There are, for instance, millimeter wave 5G deployments already underway today that will no doubt expand in scope and performance into the 6G future. That said, the ways that FR3 expand future 5G and 6G spectrum usage is an entirely unwritten chapter: Whether FR3 as a wireless spectrum band fizzles, or takes off, or finds a comfortable place somewhere in between depends in part on how it’s researched and developed now, the Pi-Radio team says.

“We’re at this tipping point where researchers and academics actually are empowered by the combination of this cutting-edge hardware with open-source software,” Mezzavilla says. “And that will enable the testing of new features for communications in these new frequency bands.” (Mezzavilla credits the National Telecommunications and Information Administration for recognizing the potential of FR3, and for funding the group’s research.)

By contrast, millimeter-wave 5G and 6G research has to date been bolstered, the team says, by the presence of a wide range of millimeter-wave software-defined radio (SDR) systems and other research platforms.

“Companies like Qualcomm, Samsung, Nokia, they actually had excellent millimeter wave development platforms,” Rangan says. “But they were in-house. And the effort it took to build one—an SDR at a university lab—was sort of insurmountable.”

So releasing an inexpensive open-source SDR in the FR3 band, Mezzavilla says, could jump start a whole new wave of 6G research.

“This is just the starting point,” Mezzavilla says. “From now on we’re going to build new features—new reference signals, new radio resource control signals, near-field operations... We’re ready to ship these yellow boxes to other academics around the world to test new features and test them quickly, before 6G is even remotely near us.”

This story was updated on 7 November 2024 to include detail about funding from the National Telecommunications and Information Administration.

Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.

Humanoids 2024: 22–24 November 2024, NANCY, FRANCE

Enjoy today’s videos!

Just when I thought quadrupeds couldn’t impress me anymore...

[ Unitree Robotics ]

Researchers at Meta FAIR are releasing several new research artifacts that advance robotics and support our goal of reaching advanced machine intelligence (AMI). These include Meta Sparsh, the first general-purpose encoder for vision-based tactile sensing that works across many tactile sensors and many tasks; Meta Digit 360, an artificial fingertip-based tactile sensor that delivers detailed touch data with human-level precision and touch-sensing; and Meta Digit Plexus, a standardized platform for robotic sensor connections and interactions that enables seamless data collection, control and analysis over a single cable.

[ Meta ]

The first bimanual Torso created at Clone includes an actuated elbow, cervical spine (neck), and anthropomorphic shoulders with the sternoclavicular, acromioclavicular, scapulothoracic and glenohumeral joints. The valve matrix fits compactly inside the ribcage. Bimanual manipulation training is in progress.

[ Clone Inc. ]

Equipped with a new behavior architecture, Nadia navigates and traverses many types of doors autonomously. Nadia also demonstrates robustness to failed grasps and door opening attempts by automatically retrying and continuing. We present the robot with pull and push doors, four types of opening mechanisms, and even spring-loaded door closers. A deep neural network and door plane estimator allow Nadia to identify and track the doors.

[ Paper preprint by authors from Florida Institute for Human and Machine Cognition ]

Thanks, Duncan!

In this study, we integrate the musculoskeletal humanoid Musashi with the wire-driven robot CubiX, capable of connecting to the environment, to form CubiXMusashi. This combination addresses the shortcomings of traditional musculoskeletal humanoids and enables movements beyond the capabilities of other humanoids. CubiXMusashi connects to the environment with wires and drives by winding them, successfully achieving movements such as pull-up, rising from a lying pose, and mid-air kicking, which are difficult for Musashi alone.

[ CubiXMusashi, JSK Robotics Laboratory, University of Tokyo ]

Thanks, Shintaro!

An old boardwalk seems like a nightmare for any robot with flat feet.

[ Agility Robotics ]

This paper presents a novel learning-based control framework that uses keyframing to incorporate high-level objectives in natural locomotion for legged robots. These high-level objectives are specified as a variable number of partial or complete pose targets that are spaced arbitrarily in time. Our proposed framework utilizes a multi-critic reinforcement learning algorithm to effectively handle the mixture of dense and sparse rewards. In the experiments, the multi-critic method significantly reduces the effort of hyperparameter tuning compared to the standard single-critic alternative. Moreover, the proposed transformer-based architecture enables robots to anticipate future goals, which results in quantitative improvements in their ability to reach their targets.

[ Disney Research paper ]

Human-like walking where that human is the stompiest human to ever human its way through Humanville.

[ Engineai ]

We present the first static-obstacle avoidance method for quadrotors using just an onboard, monocular event camera. Quadrotors are capable of fast and agile flight in cluttered environments when piloted manually, but vision-based autonomous flight in unknown environments is difficult in part due to the sensor limitations of traditional onboard cameras. Event cameras, however, promise nearly zero motion blur and high dynamic range, but produce a large volume of events under significant ego-motion and further lack a continuous-time sensor model in simulation, making direct sim-to-real transfer not possible.

[ Paper University of Pennsylvania and University of Zurich ]

Cross-embodiment imitation learning enables policies trained on specific embodiments to transfer across different robots, unlocking the potential for large-scale imitation learning that is both cost-effective and highly reusable. This paper presents LEGATO, a cross-embodiment imitation learning framework for visuomotor skill transfer across varied kinematic morphologies. We introduce a handheld gripper that unifies action and observation spaces, allowing tasks to be defined consistently across robots.

[ LEGATO ]

The 2024 Xi’an Marathon has kicked off! STAR1, the general-purpose humanoid robot from Robot Era, joins runners in this ancient yet modern city for an exciting start!

[ Robot Era ]

In robotics, there are valuable lessons for students and mentors alike. Watch how the CyberKnights, a FIRST robotics team champion sponsored by RTX, with the encouragement of their RTX mentor, faced challenges after a poor performance and scrapped its robot to build a new one in just nine days.

[ CyberKnights ]

In this special video, PAL Robotics takes you behind the scenes of our 20th-anniversary celebration, a memorable gathering with industry leaders and visionaries from across robotics and technology. From inspiring speeches to milestone highlights, the event was a testament to our journey and the incredible partnerships that have shaped our path.

[ PAL Robotics ]

Thanks, Rugilė!

Finished chips coming in from the foundry are subject to a battery of tests. For those destined for critical systems in cars, those tests are particularly extensive and can add 5 to 10 percent to the cost of a chip. But do you really need to do every single test?

Engineers at NXP have developed a machine-learning algorithm that learns the patterns of test results and figures out the subset of tests that are really needed and those that they could safely do without. The NXP engineers described the process at the IEEE International Test Conference in San Diego last week.

NXP makes a wide variety of chips with complex circuitry and advanced chip-making technology, including inverters for EV motors, audio chips for consumer electronics, and key-fob transponders to secure your car. These chips are tested with different signals at different voltages and at different temperatures in a test process called continue-on-fail. In that process, chips are tested in groups and are all subjected to the complete battery, even if some parts fail some of the tests along the way.

Chips were subject to between 41 and 164 tests, and the algorithm was able to recommend removing 42 to 74 percent of those tests.

“We have to ensure stringent quality requirements in the field, so we have to do a lot of testing,” says Mehul Shroff, an NXP Fellow who led the research. But with much of the actual production and packaging of chips outsourced to other companies, testing is one of the few knobs most chip companies can turn to control costs. “What we were trying to do here is come up with a way to reduce test cost in a way that was statistically rigorous and gave us good results without compromising field quality.”

A Test Recommender System

Shroff says the problem has certain similarities to the machine learning-based recommender systems used in e-commerce. “We took the concept from the retail world, where a data analyst can look at receipts and see what items people are buying together,” he says. “Instead of a transaction receipt, we have a unique part identifier and instead of the items that a consumer would purchase, we have a list of failing tests.”

The NXP algorithm then discovered which tests fail together. Of course, what’s at stake for whether a purchaser of bread will want to buy butter is quite different from whether a test of an automotive part at a particular temperature means other tests don’t need to be done. “We need to have 100 percent or near 100 percent certainty,” Shroff says. “We operate in a different space with respect to statistical rigor compared to the retail world, but it’s borrowing the same concept.”

As rigorous as the results are, Shroff says that they shouldn’t be relied upon on their own. You have to “make sure it makes sense from engineering perspective and that you can understand it in technical terms,” he says. “Only then, remove the test.”

Shroff and his colleagues analyzed data obtained from testing seven microcontrollers and applications processors built using advanced chipmaking processes. Depending on which chip was involved, they were subject to between 41 and 164 tests, and the algorithm was able to recommend removing 42 to 74 percent of those tests. Extending the analysis to data from other types of chips led to an even wider range of opportunities to trim testing.

The algorithm is a pilot project for now, and the NXP team is looking to expand it to a broader set of parts, reduce the computational overhead, and make it easier to use.

Waiting for each part of a 3D-printed project to finish, taking it out of the printer, and then installing it on location can be tedious for multi-part projects. What if there was a way for your printer to print its creation exactly where you needed it? That’s the promise of MobiPrint, a new 3D printing robot that can move around a room, printing designs directly onto the floor.

MobiPrint, designed by Daniel Campos Zamora at the University of Washington, consists of a modified off-the-shelf 3D printer atop a home vacuum robot. First it autonomously maps its space—be it a room, a hallway, or an entire floor of a house. Users can then choose from a prebuilt library or upload their own design to be printed anywhere in the mapped area. The robot then traverses the room and prints the design.

It’s “a new system that combines robotics and 3D printing that could actually go and print in the real world,” Campos Zamora says. He presented MobiPrint on 15 October at the ACM Symposium on User Interface Software and Technology.

Campos Zamora and his team started with a Roborock S5 vacuum robot and installed firmware that allowed it to communicate with the open source program Valetudo. Valetudo disconnects personal robots from their manufacturer’s cloud, connecting them to a local server instead. Data collected by the robot, such as environmental mapping, movement tracking, and path planning, can all be observed locally, enabling users to see the robot’s LIDAR-created map.

Campos Zamora built a layer of software that connects the robot’s perception of its environment to the 3D printer’s print commands. The printer, a modified Prusa Mini+, can print on carpet, hardwood, and vinyl, with maximum printing dimensions of 180 by 180 by 65 millimeters. The robot has printed pet food bowls, signage, and accessibility markers as sample objects.

MakeabilityLab/YouTube

Currently, MobiPrint can only “park and print.” The robot base cannot move during printing to make large objects, like a mobility ramp. Printing designs larger than the robot is one of Campos Zamora’s goals in the future. To learn more about the team’s vision for MobiPrint, Campos Zamora answered a few questions from IEEE Spectrum.

What was the inspiration for creating your mobile 3D printer?

Daniel Campos Zamora: My lab is focused on building systems with an eye towards accessibility. One of the things that really inspired this project was looking at the tactile surface indicators that help blind and low vision users find their way around a space. And so we were like, what if we made something that could automatically go and deploy these things? Especially in indoor environments, which are generally a little trickier and change more frequently over time.

We had to step back and build this entirely different thing, using the environment as a design element. We asked: how do you integrate the real world environment into the design process, and then what kind of things can you print out in the world? That’s how this printer was born.

What were some surprising moments in your design process?

Campos Zamora: When I was testing the robot on different surfaces, I was not expecting the 3D printed designs to stick extremely well to the carpet. It stuck way too well. Like, you know, just completely bonded down there.

I think there’s also just a lot of joy in seeing this printer move. When I was doing a demonstration of it at this conference last week, it almost seemed like the robot had a personality. A vacuum robot can seem to have a personality, but this printer can actually make objects in my environment, so I feel a different relationship to the machine.

Where do you hope to take MobiPrint in the future?

Campos Zamora: There’s several directions I think we could go. Instead of controlling the robot remotely, we could have it follow someone around and print accessibility markers along a path they walk. Or we could integrate an AI system that recommends objects be printed in different locations. I also want to explore having the robot remove and recycle the objects it prints.

See the interactive version of this story on our site →

In physical books, yellowing pages are usually a sign of age. But brand-new users of Amazon’s Kindle Colorsofts, the tech giant’s first color e-reader, are already noticing yellow hues appearing at the bottoms of their displays.

Since the complaints began the trickle in, Amazon has reportedly suspended shipments and announced that it is working to fix the issue. (As of publication of this article, the US $280 Kindle had an average 2.6 star rating on Amazon.) It’s not yet clear what is causing the discoloration. But while the issue is new—and unexpected—the technology is not, says Jason Heikenfeld, an IEEE Fellow and engineering professor at the University of Cincinnati. The Kindle Colorsoft, which became available on 30 October, uses “a very old approach,” says Heikenfeld, who previously worked to develop the ultimate e-paper technology. “It was the first approach everybody tried.”

Amazon’s e-reader uses reflective display technology developed by E Ink, a company that started in the 1990s as an MIT Media Lab spin off before developing its now-dominant electronic paper displays. E Ink is used in Kindles, as well as top e-readers from Kobo, reMarkable, Onyx, and more. E Ink first introduced Kaleido—the basis of the Colorsoft’s display—five years ago, though the road to full-color e-paper started well before.

How E-Readers Work

Monochromatic Kindles work by applying voltages to electrodes in the screen that bring black or white pigment to the top of each pixel. Those pixels then reflect ambient light, creating a paper-like display. To create a full-color display, companies like E Ink added an array of filters just above the ink. This approach didn’t work well at first because the filters lost too much light, making the displays dark and low resolution. But with a few adjustments, Kaleido was ready for consumer products in 2019. (Other approaches—like adding colored pigments to the ink—have been developed, but these come with their own drawbacks, including a higher price tag.)

Given this design, it initially seemed to Heikenfeld that the issue would have stemmed from the software, which determines the voltages applied to each electrode. This aligned with reports from some users that the issue appeared after a software update.

But industry analyst Ming-Chi Kuo suggested in a post on X that the issue is due to the e-reader’s hardware. Amazon switched the optically clear adhesive (OCA) used in the Colorsoft to a material that may not be so optically clear. In its announcement of the Colorsoft, the company boasted “custom formulated coatings” that would enhance the color display as one of the new e-reader’s innovations.

In terms of resolving the issue, Kuo’s post also stated that “While component suppliers have developed several hardware solutions, Amazon seems to be leaning toward a software-based fix.” Heikenfeld is not sure how a software fix would work, apart from blacking out the bottom of the screen.

Amazon did not reply to IEEE Spectrum’s request for comment. In an email to IEEE Spectrum, E Ink stated, “While we cannot comment on any individual partner or product, we are committed to supporting our partners in understanding and addressing any issues that arise.”

The Future of E-Readers

It took a long time for color Kindles to arrive, and the future of reflective e-reader displays isn’t likely to improve much, according to Heikenfeld. “I used to work a lot in this field, and it just really slowed down at some point, because it’s a tough nut to crack,” Heikenfeld says.

There are inherent limitations and inefficiencies to working with filter-based color displays that rely on ambient light, and there’s no Moore’s Law for these displays. Instead, their improvement is asymptotic—and we may already be close to the limit. Meanwhile, displays that emit light, like LCD and OLED, continue to improve. “An iPad does a pretty damn good job with battery life now,” says Heikenfeld.

At the same time, he believes there will always be a place for reflective displays, which remain a more natural experience for our eyes. “We live in a world of reflective color,” Heikenfeld says.

This is story was updated on 12 November 2024 to correct that Jason Heikenfeld is an IEEE Fellow.

The IEEE Board of Directors shapes the future direction of IEEE and is committed to ensuring IEEE remains a strong and vibrant organization—serving the needs of its members and the engineering and technology community worldwide—while fulfilling the IEEE mission of advancing technology for the benefit of humanity.

This article features IEEE Board of Directors members ChunChe “Lance” Fung, Eric Grigorian, and Christina Schober.

IEEE Senior Member ChunChe “Lance” Fung

Director, Region 10: Asia Pacific

Joanna Mai Yie Leung

Fung has worked in academia and provided industry consultancy services for more than 40 years. His research interests include applying artificial intelligence, machine learning, computational intelligence, and other techniques to solve practical problems. He has authored more than 400 publications in the disciplines of AI, computational intelligence, and related applications. Fung currently works on the ethical applications and social impacts of AI.

A member of the IEEE Systems, Man, and Cybernetics Society, Fung has been an active IEEE volunteer for more than 30 years. As a member and chair of the IEEE Technical Program Integrity and Conference Quality committees, he oversaw the quality of technical programs presented at IEEE conferences. Fung also chaired the Region 10 Educational Activities Committee. He was instrumental in translating educational materials to local languages for the IEEE Reaching Locals project.

As chair of the IEEE New Initiatives Committee, he established and promoted the US $1 Million Challenge Call for New Initiatives, which supports potential IEEE programs, services, or products that will significantly benefit members, the public, the technical community, or customers and could have a lasting impact on IEEE or its business processes.

Fung has left an indelible mark as a dedicated educator at Singapore Polytechnic, Curtin University, and Murdoch University. He was appointed in 2015 as professor emeritus at Murdoch, and he takes pride in training the next generation of volunteers, leaders, teachers, and researchers in the Western Australian community. Fung received the IEEE Third Millennium Medal and the IEEE Region 10 Outstanding Volunteer Award.

IEEE Senior Member Eric Grigorian

Director, Region 3: Southern U.S. & Jamaica

Sean McNeil/GTRI

Grigorian has extensive experience leading international cross-domain teams that support the commercial and defense industries. His current research focuses on implementing model-based systems engineering, creating models that depict system behavior, interfaces, and architecture. His work has led to streamlined processes, reduced costs, and faster design and implementation of capabilities due to efficient modeling and verification. Grigorian holds two U.S. utility patents.

Grigorian has been an active volunteer with IEEE since his time as a student member at the University of Alabama in Huntsville (UAH). He saw it as an excellent way to network and get to know people. He found his personality was suited for working within the organization and building leadership skills. During the past 43 years as an IEEE member, he has been affiliated with the IEEE Aerospace and Electronic Systems (AESS), IEEE Computer, and IEEE Communications societies.

As Grigorian’s career has evolved, his involvement with IEEE has also increased. He has been the IEEE Huntsville Section student activities chair, as well as vice chair, and chair. He also was the section’s AESS chair. He served as IEEE SoutheastCon chair in 2008 and 2019, and served on the IEEE Region 3 executive committee as area chair and conference committee chair, enhancing IEEE members’ benefits, engagement, and career advancement. He has significantly contributed to initiatives within IEEE, including promoting preuniversity science, technology, engineering, and mathematics efforts in Alabama.

Grigorian’s professional achievements have been recognized with numerous awards from employers and local technical chapters, including with the 2020 UAH Alumni of Achievement Award for the College of Engineering and the 2006 IEEE Region 3 Outstanding Engineer of the Year Award. He is a member of the IEEE–Eta Kappa Nu honor society.

IEEE Life Senior Member Christina Schober

Director, Division V

Katie Fears/Brio Art

Schober is an innovative engineer with a diverse design and manufacturing engineering background. With more than 40 years of experience, her career has spanned research, design, and manufacturing sensors for space, commercial, and military aircraft navigation and tactical guidance systems. She was responsible for the successful transition from design to production for groundbreaking programs including an integrated flight management system, the Stinger missile’s roll frequency sensor, and the designing of three phases of the DARPA atomic clock. She holds 17 U.S. patents and 24 other patents in the aerospace and navigation fields.

Schober started her career in the 1980s, at a time when female engineers were not widely accepted. The prevailing attitude required her to “stay tough,” she says, and she credits IEEE for giving her technical and professional support. Because of her experiences, she became dedicated to making diversity and inclusion systemic in IEEE.

Schober has held many leadership roles, including IEEE Division VIII Director, IEEE Sensors Council president, and IEEE Standards Sensors Council secretary. In addition to her membership in the IEEE Photonics Society, she is active with the IEEE Computer Society, IEEE Sensors Council, IEEE Standards Association, and IEEE Women in Engineering.

She is also active in her local community, serving as an invited speaker on STEM for the public school system and was a volunteer at youth shelters. Schober has received numerous awards including the IEEE Sensors Council Lifetime Contribution Award and the IEEE Twin Cities Section’s Young Engineer of the Year Award. She is an IEEE Computer Society Gold Core member, a member of the IEEE–Eta Kappa Nu honor society and received the IEEE Third Millennium Medal.

In a 5-4 decision, the Supreme Court struck down a key provision of the Voting Rights Act of 1965, stating that the legislation was based on now outdated data. The ruling removes the coverage formula that required federal oversight for voting processes in nine states.

On May 13, 1985, after a long standoff, Philadelphia municipal authorities dropped a bomb on the headquarters of the African-American radical group MOVE. In the documentary Let the Fire Burn, director Jason Osder uses archival footage to chronicle the years of tension that ended in tragedy.

In a 5-4 decision in U.S. v. Windsor, the Supreme Court ruled the federal Defense Of Marriage Act unconstitutional. The court rules that supporters of California's Proposition 8 case did not have standing to bring the case to court, which means same-sex marriages in California may resume.

In the final edition of the Political Junkie, NPR's Ken Rudin looks ahead to 2014 and 2016 elections with democratic pollster Anna Greenberg and Republican strategist Vin Weber.

The gospel legend, whose new album is titled One True Vine, has a career spanning more than 60 years. She says of the record, made in collaboration with Wilco's Jeff Tweedy, "I've gone from the strictly gospel to folk to country, and here I am right back at home where I began."

On the final day of Talk of the Nation, staff and colleagues have been faced with the dilemma of how to say goodbye. When your words fail, a greeting card can supply the right sentiment. Former Hallmark greeting card writer David Dickerson gives advice on saying goodbye.

In the final broadcast of TOTN, NPR senior Washington editor Ron Elving, senior business editor Marilyn Geewax and science correspondent Richard Harris discuss the big stories they're covering. Callers talk about the issues that have their communities and social circles abuzz.

The conflict in Syria rages on, the United States' relationship with Iran remains strained, and China is taking hold as an emerging superpower. As part of TOTN's "Looking Ahead" series, NPR commentator Ted Koppel looks to the future of international relations.

NPR's Neal Conan reflects on his 11 years of hosting Talk of the Nation and thanks some of the influential contributors to the show along the way. After 36 years at NPR, Conan signs off.

GUESTS: WILLIAM GIBSON author of Neuromancer, Mona Lisa Overdrive and Virtual Light. DAVID BRIN astronomer, professor and author of Foundation's Triumph, Infinity's Shore, and The Postman.

This guest review comes from Lisa! A longtime romance aficionado and frequent commenter to SBTB, Lisa is a queer Latine critic with a sharp tongue and lots of opinions. She frequently reviews at All About Romance and Women Write About Comics, where she’s on staff, and you can catch her at @thatbouviergirl on Twitter. There, she shares good reviews, bracing industry opinions and thoughtful commentary when she’s not on her grind looking for the next good freelance … Continue reading If I Stopped Haunting You by Colby Wilkens →

Welcome, everyone! My partner and I are officially homeowners and we got to sign our paperwork in a haunted law office. Absolute perfection. We won’t move in for a bit because there’s painting to do and flooring to replace, but I’m feeling very emotional (in a good way) about the whole thing. The notion of not renting anymore and being able to customize whatever I want feels so freeing! The possibilities are endless! I’m also … Continue reading Links: Podcasts, Cheese, & More →

Hello, everyone! We have a slightly different Rec League this week. On a bonus episode of the podcast, which we release for SBTB Podcast Patreon members, Sarah asked me to come up with some fall gaming recs. Well, I definitely overdid it and had twenty in a matter of ten minutes. Most of these are cozy games, with a couple of exceptions. If you are a fellow cozy gamer, allow me to plug Wholesome Games. … Continue reading The Rec League: Video Games for Fall →

If you’ve noticed CloudFlare verifying that you’re human, that’s because I had to enable extra security because of a DDOS attack. I also woke up to 1500+ spam email messages sent through contact forms on the site, too. The poor server is having A Time of it. At least it’s not Tuesday, I guess? Then I’d have all those dildos to contend with. (Also: every time I see that cover, my brain wants to read … Continue reading Just a Little DDOS Fun, Dildos, and Finding the Mystery Cowboy →

In this week’s podcast episode, we’re looking at the glorious  ads and features for the October/November 1988 issue of RT Magazine. Thank you to Amy M. for this issue! You can also find all the RTRW content at our category page for Romantic Times Rewind.  If you want to listen and follow along with this entry, we have more detail in the audio, but you can click play and listen and read and absorb all … Continue reading Romantic Times Rewind: October 1988 Ads & Features →

It’s time for the Ads & Features of the October 1988 (!!) issue of Romantic Times Magazine. Y’all. We’ve got: Vintage gossip! Blind items that are very easy to guess! Danielle Steel’s two blue Mercedes! Fuchsia covers with giant flowers and startled animals! Riverboat gambler romance heroes! And a truly paltry obituary for an extraordinary author. It’s 1988. Fuchsia. So much fuchsia. Blanket content warning for romances written in the late 80s. Be ready for … Continue reading 637. RT Rewind October 1988 Ads & Features →

Welcome to Book Beat! Book Beat aims to highlight other books that we may hear about through friends, social media, or other sources. We could see a gorgeous ad! Or find a new-to-us author on a list of underrated romances! Think of Book Beat as Teen Beat or Tiger Beat, but for books. And no staples to open to get the fold-out poster.

This week’s bestseller list is brought to you by sweet and salty snacks, a weighted heating pad, and our affiliate sales data!

This piece of literary mayhem is exclusive to Smart Bitches After Dark, but fret not. If you'd like to join, we'd love to have you! Have a look at our membership options, and come join the fun! If you want to have a little extra fun, be a little more yourself, and be part of keeping the site open for everyone in the future, we can’t wait to see you in our new subscription-based section … Continue reading Sunday Sale Digest! →

OverDrive is the company that provides a lot of digital content to libraries. If you’ve borrowed an ebook or an audiobook in Libby,  or read a magazine in Kanopy, that’s OverDrive. It seems there is some AI weirdness with audiobook narration on OverDrive, and the narrator is only part of the story. On Monday, October 14, librarian Robin Bradford posted on Bluesky that she’d purchased an AI audiobook for her library system and she was … Continue reading AI Audiobook Narrators in OverDrive and the Issue of Library AI Circulation Policy →

Happy Tuesday! A bit of a bite-sized Hide Your Wallet this week, with one release leftover from late last week that I neglected to include. I can hardly believe October is nearly over! Time to consult my November TBR pile, so it doesn’t sneak up on me. Which releases are you excited about this week? Let us know in the comments!

This HaBO comes from Kiruthika, who is trying to find this Mills & Boon romance. Content warning for mentions of abuse and rape: It’s a 70s or 80s Mills and Boon that my mom had that I sneakily read as a 12 year old! The cover was white with a couple embracing, fair haired woman and darker haired man. He’s described to be lion like in movement and has tawny eyes. I remember that part … Continue reading HaBO: He’s Described as a Lion with Tawny Eyes →

Death at Morning House is a YA that’s part historical mystery, part haunted house story. I enjoyed it, but I kept getting pulled out of the story because it seemed wildly implausible to me that the kids in the book were as unsupervised as they were. In the present day, Marlowe Wexler is struggling with teenage awkwardness and realizing her own queer identity. When the book opens, she’s house-sitting for a friend of the family … Continue reading Death at Morning House by Maureen Johnson →

It’s time! Smart Bitches After Dark is open to everyone for registration! You can register now! Come on in, the mayhem is delightful! You might have seen our first After Dark posts go up the past two Sundays, with a link to register, but this is the Official Announcement. Mostly because I used Capital Letters. We already have over 100 members of the community registered, and it’s going to be a LOT of fun. You can … Continue reading Smart Bitches After Dark is Open for Registration! →

Welcome back, everyone! We’re having a string of warmer weather in New England and it’s really harshing my fall vibes. I also keep seeing photos or reels of people I know receiving “boo baskets.” Is anyone else familiar? It’s like an Easter basket, but for Halloween. And I kind of love it? I floated the idea by my partner and I was surprised that they wanted to exchange some. Their reasoning is that we’ve been … Continue reading Links: Public Libraries, Lord of the Rings, & More →

Strange Beasts is so much fun that the minute I finished the book, I downloaded the audio for my husband to listen to. This is a paranormal adventure meets gothic mystery with a sapphic love story intertwined in all of that. It has shades of Penny Dreadful, non stop action, and it’s just a blast to read. The novel takes place in an alternate Victorian era where paranormal creatures openly exist with human beings. Sam … Continue reading Strange Beasts by Susan J. Morris →