Washington — Prompted by the death of a worker whose fall protection lanyard was severed by an exposed edge as he fell, OSHA has issued a hazard alert.

Toronto — The Infrastructure Health and Safety Association has published a guide on reducing the risk of struck-by incidents in the workplace.

Washington — The most common crane-related hazards – and how technology may help solve them – are detailed in a new report from the National Safety Council’s Work to Zero initiative and the NCCCO Foundation.

New York — The New York City Department of Buildings has issued a construction advisory on the dangers of aging brick facades, which could create unsafe conditions that lead to catastrophic events.

Washington — The fifth annual National Stand-Down to Prevent Struck-By Incidents begins April 15, providing employers with opportunities to raise awareness of struck-by hazard recognition and prevention.

Springfield, IL — Legislation that would require driver’s education courses to feature lessons on worker and driver safety in highway constructions zones is advancing in the Illinois Legislature.

Silver Spring, MD — Developing a strong safety climate on construction worksites can improve safety outcomes, CPWR – The Center for Construction Research and Training says in a new video.

East Lansing, MI — Falls involving portable ladders caused 84 on-the-job deaths from 2001 to 2021 in Michigan, prompting a new hazard alert from Michigan State University.

Washington — The National Safety Stand-Down to Prevent Falls in Construction kicks off May 6.

Silver Spring, MD — Thirty-nine workers died while performing trench/excavation work in 2022, up from 15 in 2021, according to a new report from CPWR – The Center for Construction Research and Training.

Waltham, MA — The higher outdoor temperatures climb, the more likely it is that a worker will be injured, according to a recent study from the Workers Compensation Research Institute.

New York — Although deaths at New York City building construction sites fell to their lowest level in nearly a decade in 2023, work-related injuries rose 25%, reports the city’s Department of Buildings.

Portland, OR — Responding to the 19 fatal falls involving construction workers in the state since 2018, the Oregon Institute of Occupational Health Sciences has issued a hazard alert.

Washington — Engagement of top management and substance misuse prevention programs are among four essential safety best practices of construction industry employers, Associated Builders and Contractors says.

Arlington, VA — Nearly 2 out of 3 highway construction contractors say motor vehicle crashes have happened in work zones under their firm’s operation in the past year, according to a new survey.

Washington — Preventing harassment in the construction industry is the focus of a new guidance document from the Equal Employment Opportunity Commission.

Silver Spring, MD — Nearly 1,100 construction workers died in 2022, according to a recent data bulletin published by CPWR – The Center for Construction Research and Training.

Salem, OR — Oregon OSHA is offering for free its latest training course on keeping workers safe in confined spaces.

New York — The New York City Department of Buildings is reminding construction contractors of their obligation to prevent “foam snow” from littering sidewalks and streets.

Blacksburg, VA — Construction employers can help stem the industry’s elevated suicide rates by enhancing their crisis management skills via training, as well as providing flexible leave policies and counseling.

Arlington, VA — Recent changes to an American National Standards Institute/International Safety Equipment Association consensus standard are intended to enhance worker and facility protections from dropped objects on jobsites.

Bilbao, Spain — A new video from the European Agency for Safety and Health at Work highlights strategies to reduce the risks of heat stress on the job.

New York — The Building Trades Employers’ Association is calling on local, state and federal leaders to adopt reforms aimed at enhancing mental health awareness in the construction industry.

New York — Research intended to gain a better understanding of the effects of heat on construction worker health is continuing, project organizers recently announced.

Silver Spring, MD — Creating a “culture of care” is among the topics to be discussed during an upcoming webinar on preventing suicide in the construction industry.

Springfield, IL — Driver’s education courses in Illinois must now feature lessons on safely navigating roadway construction zones, under a new state law.

Silver Spring, MD — Protecting workers who handle products containing nanomaterials begins by controlling exposures “like other potential hazards,” CPWR – The Center for Construction Research and Training says in a new fact sheet.

Albany, NY — Two separate bills recently introduced in New York state are both aimed at protecting workers and drivers in highway work zones.

Silver Spring, MD — With the construction industry experiencing elevated suicide rates, employers can support workers by “reassuring them that help is available, that mental health is the same as physical health,” an expert on prevention says.

Silver Spring, MD — Nearly 1 out of 5 construction workers report having anxiety or depression, and the overwhelming majority of them haven’t sought expert help, a new report shows.

Dayton, OH — A new video from NATE: The Communications Infrastructure Contractors Association explores updates to the American National Standards Institute/American Society of Safety Professionals A10.48-2023 standard covering pre-job planning.

Washington — The National Safety Council has published a new report highlighting technology solutions that have the potential to reduce the risk of injury and death when working in and around cranes.

Washington — Three OSHA regions have continued or established a set of emphasis programs, the agency recently announced.

New York — Legislation recently introduced in New York City would establish a database on workplace deaths, and employers could be fined up to $2,500 per violation for not reporting data.

Washington — Hearing conservation and women in construction are among the topics scheduled for discussion during an upcoming Advisory Committee on Construction Safety and Health meeting.

Salem, OR — Oregon OSHA has launched a Spanish version of its training course on keeping workers safe in confined spaces.

Boston — OSHA’s Boston regional office recently renewed some of its Regional Emphasis Programs.

Washington — How can Prevention through Design practices reduce or eliminate some of the construction industry’s most common hazards? A new toolkit from NIOSH is intended as a guide.

A 41-year-old framer had been working for two weeks at a residential subcontractor at the site of a new apartment complex. The framer and a co-worker planned to use two scissor lifts in tandem to raise and insert a glulam wooden beam into the side of a horizontal I-beam more than 8 feet above the concrete floor.

Washington — Acting Labor Secretary Julie Su has renewed the two-year charter for OSHA’s Advisory Committee on Construction Safety and Health.

New York — Emphasizing that failure to follow construction codes and project-specific requirements can put both people and property at risk, the New York City Department of Buildings is reminding contractors about 17 procedures they need to follow during excavation and trench work.

Washington — OSHA conducted fewer fatality investigations this past fiscal year than in FY 2023, and recorded fewer deaths involving trench collapses and falls – two hazards on which the agency has focused its enforcement resources.

The new 3M^TM SecureFit^TM Protective Eyewear 400 Series enhances temple comfort and security of fit with soft adjustable nose pads and dual-injected temples. For a limited time, register to receive a free pair of SecureFit^TM 400 Series protective eyewear, and feel the difference security of fit makes!

Celebrating 90 years as a premier German brand, security and safety products manufacturer ABUS sets the standard for quality and innovation. Products include padlocks, chains and cables, Diskus^® locks, safety lockout padlocks, and more. ABUS is the first company worldwide to offer products validated by Underwriters Laboratories^® Environment. Visit www.abus.com.

Heartsaver First Aid CPR AED Online is a self-directed course that uses interactive lessons and videos to teach you comprehensive first aid, CPR, and AED knowledge. This program is for anyone with limited or no medical training who needs an AHA course completion card. www.heart.org/cpr.

The “Career Paths in Safety” brochure offers certification options at basic, technologist and technician, trainer, and professional levels. It outlines safety education, experience and job roles. “Career Paths in Safety” includes information on BCSP’s certifications, including the CSP, OHST, CHST, STS and CET.

The Loner Safety Monitoring Device provides instant emergency alerting accompanied by real- time location information, allowing organizations to exceed worker safety regulations. The Loner SMD will automatically send an alert to monitoring personnel in the event of an emergency or incident – even if the employee is unconscious or incapacitated.

The Guarddog Self-Closing Safety Gate from BlueWater Manufacturing, Inc. is tough, durable and easy to install. The gate is available in powder-coated, galvanized and stainless steel finishes, as well as in five nominal sizes. Provide your employees with the best safety gate available with the Guarddog.

Mark your floors the right way! Step up workplace operations with durable floor-marking tape that’s applied by following color standards and floor-marking best practices. Brady’s free 5S Floor-Marking Color Standard provides useful guidelines, tips and examples for putting an effective floor-marking program in place.

The BullsEye™ digital fire extinguisher training system provides hands-on training that is realistic, interactive and safe for every member of the workforce. Rechargeable laser-driven extinguishers eliminate the cost and lost productivity associated with traditional training methods. Train more people in less time with BullEx.