Background and objective

Exercise is a cornerstone of management for type 2 diabetes; however, little is known about the cardiovascular (CV) response to submaximal functional exercise in people with type 2 diabetes. The aim of this study was to compare performance and CV response during a 6-minute walk test (6MWT) between people with type 2 diabetes and matched control subjects.

Editor’s Note: This article is adapted from the address Ms. Valentine delivered as the recipient of the American Diabetes Association’s (ADA’s) Outstanding Educator in Diabetes Award for 2019. She delivered the address in June 2019 at the Association’s 79th Scientific Sessions in San Francisco, CA. A webcast of this speech is available for viewing at the ADA website (professional.diabetes.org/webcast/outstanding-educator-diabetes-award-lecture%E2%80%94-most-important-thing-we-give-people-hope).

Despite significant advances in therapies for pediatric type 1 diabetes, achievement of glycemic targets remains elusive, and management remains burdensome for patients and their families. This article identifies common challenges in diabetes management at the patient-provider and health care system levels and proposes practical approaches to overcoming therapeutic inertia to enhance health outcomes for youth with type 1 diabetes.

Introduction

Immunotherapy has become the standard of care in advanced non-small cell lung cancer (NSCLC). We aimed to quantify the economic impact, in France, of anti-PD-1 therapy for NSCLC.

Background

We aimed to investigate the epidemiological and clinical features, and medical care-seeking process of patients with the 2019 coronavirus disease (COVID-19) in Wuhan, China, to provide useful information to contain COVID-19 in other places with similar outbreaks of the virus.

ABSTRACT

Academics in non-tenure-track positions encounter a unique set of challenges on the road toward tenure. Institutionalized policies and lack of mentors are additional burdens for foreign scientists, resulting in representation differences. Becoming a scientist has been a personal and moving journey in which my multiple selves intersect and clash every now and again. My identity as a scientist is a life project and has intersected with my other identities: a young Latina immigrant in Western Europe. This crossroad has molded, and at times, challenged my participation in science.

ABSTRACT

The prevailing paradigm in obstetrics has been the sterile womb hypothesis. However, some are asserting that the placenta, intra-amniotic environment, and fetus harbor microbial communities. The objective of this study was to determine whether the fetal and placental tissues of rhesus macaques harbor bacterial communities. Fetal, placental, and uterine wall samples were obtained from cesarean deliveries without labor (~130/166 days gestation). The presence of bacteria in the fetal intestine and placenta was investigated through culture. The bacterial burden and profiles of the placenta, umbilical cord, and fetal brain, heart, liver, and colon were determined through quantitative real-time PCR and DNA sequencing. These data were compared with those of the uterine wall as well as to negative and positive technical controls. Bacterial cultures of fetal and placental tissues yielded only a single colony of Cutibacterium acnes. This bacterium was detected at a low relative abundance (0.02%) in the 16S rRNA gene profile of the villous tree sample from which it was cultured, yet it was also identified in 12/29 background technical controls. The bacterial burden and profiles of fetal and placental tissues did not exceed or differ from those of background technical controls. By contrast, the bacterial burden and profiles of positive controls exceeded and differed from those of background controls. Among the macaque samples, distinct microbial signals were limited to the uterine wall. Therefore, using multiple modes of microbiologic inquiry, there was not consistent evidence of bacterial communities in the fetal and placental tissues of rhesus macaques.

IMPORTANCE Microbial invasion of the amniotic cavity (i.e., intra-amniotic infection) has been causally linked to pregnancy complications, especially preterm birth. Therefore, if the placenta and the fetus are typically populated by low-biomass microbial communities, current understanding of the role of microbes in reproduction and pregnancy outcomes will need to be fundamentally reconsidered. Could these communities be of benefit by competitively excluding potential pathogens or priming the fetal immune system for the microbial bombardment it will experience upon delivery? If so, what properties (e.g., microbial load and community membership) of these microbial communities preclude versus promote intra-amniotic infection? Given the ramifications of the in utero colonization hypothesis, critical evaluation is required. In this study, using multiple modes of microbiologic inquiry (i.e., culture, quantitative real-time PCR [qPCR], and DNA sequencing) and controlling for potential background DNA contamination, we did not find consistent evidence for microbial communities in the placental and fetal tissues of rhesus macaques.

ABSTRACT

The chemical structures of soluble fiber carbohydrates vary from source to source due to numerous possible linkage configurations among monomers. However, it has not been elucidated whether subtle structural variations might impact soluble fiber fermentation by colonic microbiota. In this study, we tested the hypothesis that subtle structural variations in a soluble polysaccharide govern the community structure and metabolic output of fermenting microbiota. We performed in vitro fecal fermentation studies using arabinoxylans (AXs) from different classes of wheat (hard red spring [AX_HRS], hard red winter [AX_HRW], and spring red winter [AX_SRW]) with identical initial microbiota. Carbohydrate analyses revealed that AX_SRW was characterized by a significantly shorter backbone and increased branching compared with those of the hard varieties. Amplicon sequencing demonstrated that fermentation of AX_SRW resulted in a distinct community structure of significantly higher richness and evenness than those of hard-AX-fermenting cultures. AX_SRW favored OTUs within Bacteroides, whereas AX_HRW and AX_HRS favored Prevotella. Accordingly, metabolic output varied between hard and soft varieties; higher propionate production was observed with AX_SRW and higher butyrate and acetate with AX_HRW and AX_HRS. This study showed that subtle changes in the structure of a dietary fiber may strongly influence the composition and function of colonic microbiota, further suggesting that physiological functions of dietary fibers are highly structure dependent. Thus, studies focusing on interactions among dietary fiber, gut microbiota, and health outcomes should better characterize the structures of the carbohydrates employed.

IMPORTANCE Diet, especially with respect to consumption of dietary fibers, is well recognized as one of the most important factors shaping the colonic microbiota composition. Accordingly, many studies have been conducted to explore dietary fiber types that could predictably manipulate the colonic microbiota for improved health. However, the majority of these studies underappreciate the vastness of fiber structures in terms of their microbial utilization and omit detailed carbohydrate structural analysis. In some cases, this causes conflicting results to arise between studies using (theoretically) the same fibers. In this investigation, by performing in vitro fecal fermentation studies using bran arabinoxylans obtained from different classes of wheat, we showed that even subtle changes in the structure of a dietary fiber result in divergent microbial communities and metabolic outputs. This underscores the need for much higher structural resolution in studies investigating interactions of dietary fibers with gut microbiota, both in vitro and in vivo.

ABSTRACT

In numerous instances, tracking the biological significance of a nucleic acid sequence can be augmented through the identification of environmental niches in which the sequence of interest is present. Many metagenomic data sets are now available, with deep sequencing of samples from diverse biological niches. While any individual metagenomic data set can be readily queried using web-based tools, meta-searches through all such data sets are less accessible. In this brief communication, we demonstrate such a meta-metagenomic approach, examining close matches to the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in all high-throughput sequencing data sets in the NCBI Sequence Read Archive accessible with the "virome" keyword. In addition to the homology to bat coronaviruses observed in descriptions of the SARS-CoV-2 sequence (F. Wu, S. Zhao, B. Yu, Y. M. Chen, et al., Nature 579:265–269, 2020, https://doi.org/10.1038/s41586-020-2008-3; P. Zhou, X. L. Yang, X. G. Wang, B. Hu, et al., Nature 579:270–273, 2020, https://doi.org/10.1038/s41586-020-2012-7), we note a strong homology to numerous sequence reads in metavirome data sets generated from the lungs of deceased pangolins reported by Liu et al. (P. Liu, W. Chen, and J. P. Chen, Viruses 11:979, 2019, https://doi.org/10.3390/v11110979). While analysis of these reads indicates the presence of a similar viral sequence in pangolin lung, the similarity is not sufficient to either confirm or rule out a role for pangolins as an intermediate host in the recent emergence of SARS-CoV-2. In addition to the implications for SARS-CoV-2 emergence, this study illustrates the utility and limitations of meta-metagenomic search tools in effective and rapid characterization of potentially significant nucleic acid sequences.

IMPORTANCE Meta-metagenomic searches allow for high-speed, low-cost identification of potentially significant biological niches for sequences of interest.

Molar element ratio analysis of element concentrations consists of four basic tools that provide substantial insight into the lithogeochemistry (and mineralogy) of rocks under examination. These tools consist of: (1) conserved element ratio analysis; (2) Pearce element ratio analysis; (3) general element ratio analysis; and (4) lithogeochemical mineral mode analysis. Conserved element ratio analysis is useful in creating a chemostratigraphic model for the host rocks to mineral deposits, whereas Pearce element ratio analysis and general element ratio analysis are primarily used to identify mineralogical and metasomatic controls on rock compositions and to investigate and quantify the extent of the material transfers that formed the host rocks and mineralization. Lithogeochemical mineral mode analysis converts element concentrations into mineral concentrations using a matrix-based change-of-basis operation, allowing lithogeochemical data to be interpreted in terms of mineral modes. It can be used to provide proper names to rocks, an important activity for an exploration geologist because of the implications that rock names have on genetic processes and mineral deposit models.

This paper provides a review of the theoretical foundations of each of these four tools and then illustrates how these techniques have been used in a variety of exploration applications to assist in the search for, evaluation and planning of, and the mining of mineral deposits. Examples include the evaluation of total digestion lithogeochemical datasets from mineral deposits hosted by igneous and sedimentary rocks and formed by hydrothermal and igneous processes. In addition, this paper illustrates a more recent geometallurgical application of these methods, whereby the mineral proportions determined by lithogeochemical mineral mode analysis are used to predict rock properties and obtain the ore body knowledge critical for resource evaluation, mine planning, mining and mine remediation.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

Multi-element geochemical surveys of rocks, soils, stream/lake/floodplain sediments and regolith are typically carried out at continental, regional and local scales. The chemistry of these materials is defined by their primary mineral assemblages and their subsequent modification by comminution and weathering. Modern geochemical datasets represent a multi-dimensional geochemical space that can be studied using multivariate statistical methods from which patterns reflecting geochemical/geological processes are described (process discovery). These patterns form the basis from which probabilistic predictive maps are created (process validation). Processing geochemical survey data requires a systematic approach to effectively interpret the multi-dimensional data in a meaningful way. Problems that are typically associated with geochemical data include closure, missing values, censoring, merging, levelling different datasets and adequate spatial sample design. Recent developments in advanced multivariate analytics, geospatial analysis and mapping provide an effective framework to analyse and interpret geochemical datasets. Geochemical and geological processes can often be recognized through the use of data discovery procedures such as the application of principal component analysis. Classification and predictive procedures can be used to confirm lithological variability, alteration and mineralization. Geochemical survey data of lake/till sediments from Canada and of floodplain sediments from Australia show that predictive maps of bedrock and regolith processes can be generated. Upscaling a multivariate statistics-based prospectivity analysis for arc-related Cu–Au mineralization from a regional survey in the southern Thomson Orogen in Australia to the continental scale, reveals a number of regions with a similar (or stronger) multivariate response and hence potentially similar (or higher) mineral potential throughout Australia.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

This paper focuses on handheld and top-of-hole techniques which have appeared since 2007 or have undergone major improvements, and discusses their benefits, challenges and pitfalls, why we use them and what to expect from them. There is an ongoing need to be innovative with the way we undertake mineral exploration. Recent technological advances that have been applied to successful mineral exploration include on-site or portable instruments, on-site laboratory technologies, various core scanners, and technologies for fluid analysis. Portable or field technologies such as pXRF, pXRD, pNIR-SWIR, µRaman and LIBS aid in obtaining chemical and mineralogical information. Spectral gamma tools, a well-known technology, recently took advantage of improved ground and airborne (drone) instruments, to complement hyperspectral imagery. At mine and exploration sites, top-of-hole sensing technologies, such as Lab-at-Rig® and various core scanners (both spectral- and XRF-based) have become useful tools to analyse metres of core as it is being drilled. Fluid analyses are not as common as analyses of solid materials, but there are advances in such technologies as anodic stripping voltammetry, polarography and ion-exchange electrodes aiming for analysis of commodity or environmentally important elements.

Field-portable geochemical techniques and on-site technologies now offer instant response and flexibility for most exploration tasks. By providing relevant data within minutes, they allow safer field decisions and focus on the most promising finds, while saving valuable resources in sampling grids or drilling. More efficient laboratory analysis programs are supported by sample screening and homogeneity checking on-site. Field analyses are not always as accurate as laboratory ones, but most of the time can be correlated with them, enabling reliable decisions. The level of confidence in field-made decisions needs to be compared between later and less numerous laboratory analyses, and less precise but more abundant and immediate field analyses. It may be demonstrated that, in many cases, the fit–for-purpose nature of the latter allows a better confidence level. Quality compromises associated with field analyses can be reduced by the application of better sample preparation and quality assurance/quality control (QA/QC) procedures. Most of the further development of on-site chemical analysis is expected to be based on its integration with lab methods and on sound QA/QC practice, allowing a precise evaluation of its confidence level and uncertainties. Mineralogical analyses are constrained by our ability to interpret the data in near-real time but offer promising approaches in both surface and drilling exploration campaigns.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

Among the emerging techniques to detect the real footprint of buried ore deposits is isotope tracing. Novel and automated preparation systems such as continuous flow isotope ratio mass spectrometry, off-axis integrated cavity output spectroscopy for isotopic compositions of selected molecules, multi-collector inductively coupled-plasma mass spectrometry (ICP-MS), triple quadrupole ICP-MS, laser ablation ICP-MS, and a multitude of inline preparation systems have facilitated the use of isotopes as tracers in mineral exploration, as costs for isotope analyses have decreased and the time required for the analyses has improved. In addition, the isotope systems being used have expanded beyond the traditional light stable and Pb isotopes to include a multitude of elements that behave differently during processes that promote the mobilization of elements during both primary and secondary dispersion. Isotopes are also being used to understand barren areas that lack a critical process to form an ore deposit and to reveal precise redox mechanisms. The goal is to be able to use isotopes to reflect a definitive process that occurs in association with the deposit and not in barren systems, and then to relate these to something that is easier to measure, namely elemental concentrations. As new generations of exploration and environmental scientists are becoming more comfortable with the application of isotopes to effectively trace processes involved in geoscience, and new technologies for rapid and inexpensive analyses of isotopes are continually being developed, novel applications of isotope tracing are becoming more mainstream.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

In the past decade, significant research efforts have been devoted to mineral chemistry studies to assist porphyry exploration. These activities can be divided into two major fields of research: (1) porphyry indicator minerals (PIMs), which are used to identify the presence of, or potential for, porphyry-style mineralization based on the chemistry of magmatic minerals such as zircon, plagioclase and apatite, or resistate hydrothermal minerals such as magnetite; and (2) porphyry vectoring and fertility tools (PVFTs), which use the chemical compositions of hydrothermal minerals such as epidote, chlorite and alunite to predict the likely direction and distance to mineralized centres, and the potential metal endowment of a mineral district. This new generation of exploration tools has been enabled by advances in and increased access to laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), short-wave length infrared (SWIR), visible near-infrared (VNIR) and hyperspectral technologies. PIMs and PVFTs show considerable promise for exploration and are starting to be applied to the diversity of environments that host porphyry and epithermal deposits globally. Industry has consistently supported development of these tools, and in the case of PVFTs encouraged by several successful blind tests where deposit centres have successfully been predicted from distal propylitic settings. Industry adoption is steadily increasing but is restrained by a lack of the necessary analytical equipment and expertise in commercial laboratories, and also by the ongoing reliance on well-established geochemical exploration techniques (e.g. sediment, soil and rock chip sampling) that have aided the discovery of near-surface resources over many decades, but are now proving less effective in the search for deeply buried mineral resources and for those concealed under cover.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

There have been several advances in inductively coupled plasma-mass spectrometer (ICP-MS) analytical technologies in the last decade. Collision/reaction cell ICP-MS and triple quadrupole ICP-MS techniques can produce lower detection limits for select elements that experience interferences with a standard quadrupole (e.g. Se and As). Triple quadrupole ICP-MS, in particular, can eliminate virtually all polyatomic or isobaric interferences for highly accurate measurements of some element isotopes systematics that are of great interest in mineral exploration, namely Pb/Pb. Laser ablation ICP-MS has become more popular as an effective analytical tool to measure mineral grain trace elements, which could assist in vectoring to mineralization or exploration drill targets. The ablation of a spot on a Li-borate fused glass disk paired with XRF analysis has also gained popularity as an alternative to total whole rock characterization packages that employ several separate digestions and analytical methods. While there have been several advancements in ICP-MS technologies in exploration geochemistry, they have not been widely accepted or implemented. This slow adaptation could be due to the extended recession in the mining industry between 2012 and 2017. It is also possible that standard ICP-MS data (i.e. no collision/reaction cell) is still fit for purpose. This stands in stark contrast to implementation of ICP-MS in the previous decade (1997–2007), which was transformational for the industry.

Consideration of all elements from large multi-element ICP-MS analytical suites for mineral exploration can be an extremely powerful tool in the exploration toolkit. The discovery of the White Gold District, Yukon, is a prime example of how the utilization of soil geochemical data, when plotted spatially, can vector to gold mineralization. The presence of Au + As + Sb soil anomalies were key to delineating mineralization, especially when accompanied by publicly available geological, geographical and geophysical data. Additionally, elements and element ratios not typically considered in Au exploration, including Ni and U, were utilized to determine the lithological and structural controls on mineralization. The availability of multi-element ICP-MS data was also useful in the discovery of the Cascadero Copper Taron Caesium deposit. Ore-grade Cs was discovered only because Cs was included in the multi-element ICP-MS exploration geochemistry suite. Before the availability of ICP-MS, it is unlikely that this deposit would have been discovered.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

Mineral exploration under relatively young, exotic cover still presents a major challenge to discovery. Advances and future developments can be categorized in four key areas, (1) understanding metal mobility and mechanisms, (2) rapid geochemical analyses, (3) data access, integration and interoperability and (4) innovation in laboratory-based methods.

Application of ‘regolith-style' surface mapping in covered terrains outside of conventional lateritic terrains is achieving success in terms of reducing background noise and improving geochemical contrasts. However, process models for anomaly generation are still uncertain and require further research. The interaction between the surface environment, microbes, hydrocarbons and chemistry is receiving greater attention. While significant progress has been achieved in understanding the role of vegetation, interaction with the water table and cycling of metals in the near surface environment in Australia, other regions of the world, for example, the till-covered terrains in the northern hemisphere and arid colluvium-covered areas of South America, have seen less progress. In addition to vegetation, the influence of bacteria, fungi and invertebrates is not as well studied with respect to metal mobilization in cover. Field portable XRF has become a standard field technique, though more often used in a camp setting. Apart from a tweaking of analytical quality, instruments have probably reached their peak of analytical development with add-ons, such as cameras, beam-limiters, wireless transmission and GPS as the main differences between instrument suppliers. Their future rests in automated application in unconventional configurations, for example, core scanning and better integration of analytical data with other information such as spectral analyses. Pattern drilling that persists in industry, however, has benefited from innovative application of field-portable tools along with rock and mineral chemistry to provide near real-time results and assist in a shift toward more flexible and targeted drilling in greenfields settings.

Innovation in the laboratory continues to progress. More selective geochemical analysis, imaging of fine particle size fractions and resistate mineral phases and isotope analysis are faster and more accessible than ever before. The application of genomics (and data analysis) as mineral exploration tools is on the horizon. A continuing problem in geoscience, the supply to industry of suitably trained geochemists, persists although some needs, particularly at junior level, will be met by recent initiatives at various universities at graduate level. Unfortunately, the current economic climate has had a significant impact on R&D and retention of geochemistry skills by the industry. Whilst the future is positive, significant investment is required to develop the next generation of geochemical exploration tools and concepts.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

The bioprocessing industry uses recombinant mammalian cell lines to generate therapeutic biologic drugs. To ensure consistent product quality of the therapeutic proteins, it is imperative to have a controlled production process. Regulatory agencies and the biotechnology industry consider cell line "clonal origin" an important aspect of maintaining process control. Demonstration of clonal origin of the cell substrate, or production cell line, has received considerable attention in the past few years, and the industry has improved methods and devised standards to increase the probability and/or assurance of clonal derivation. However, older production cell lines developed before the implementation of these methods, herein referred to as "legacy cell lines," may not meet current regulatory expectations for demonstration of clonal derivation. In this article, the members of the IQ Consortium Working Group on Clonality present our position that the demonstration of process consistency and product comparability of critical quality attributes throughout the development life cycle should be sufficient to approve a license application without additional genetic analysis to support clonal origin, even for legacy cell lines that may not meet current day clonal derivation standards. With this commentary, we discuss advantages and limitations of genetic testing methods to support clonal derivation of legacy cell lines and wish to promote a mutual understanding with the regulatory authorities regarding their optional use during early drug development, subsequent to Investigational New Drug (IND) application and before demonstration of product and process consistency at Biologics License Applications (BLA) submission.

This technology review, written by a small group of pharmaceutical microbiologists experienced in cell therapies, discussed a risk-based approach to microbiological contamination detection and control during gene and cell therapy production. Topics discussed include a brief overview of cell therapies, a risk analysis related to donor selection, cell collection and infectious agent testing, cell transformation and expansion, packaging, storage, and administration, and cell therapy microbial contamination testing and release.

Glass is the favorite material for parenteral packaging because of its physico-chemical properties. Type I borosilicate glass is worldwide use at this scope, but it may have some issues related to breakage, corrosion and delamination that might compromise the drug quality, safety and efficacy. These issues can be mitigated and avoided starting from the appropriate selection of the most suitable raw material at the early stage of the glass container design. In this study, Type I borosilicate glass vials manufactured using two glass tubes having different chemical compositions, were studied and compared in terms of their resistance to corrosion. Testing design was applied with the aim to select the best practice approach comparing different storage simulation conditions: ageing treatment through autoclaving and stability testing (real-time and accelerated). Clear differences were found between the different glass types in terms of hydrolytic and corrosion resistance that highlighted the relation between chemical composition and glass chemical durability. Non-negligible differences were also observed using different storage conditions.

A vial-capping process for lyophilization stopper configurations was previously quantified using residual seal force (RSF). A correlation between RSF and container closure integrity (CCI) was established, and component positional offsets were identified to be the primary source of variability in RSF measurements.

To gain insight into the effects of stopper geometry on CCI, serum stoppers with the same rubber formulation were investigated in this study. Unlike lyophilization stoppers that passed CCI (per helium leak testing) even with RSF of 0 N owing to their excellent valve seal, serum stoppers consistently failed CCI when RSF was <15.8 N. When the plug was removed, both types of stoppers exhibited a comparable critical lower RSF limit (19–20 N), below which CCI could not be maintained. When CCI was retested at later time points (up to 6 mo), some previously failed vials passed CCI, suggesting that CCI improvement might be related to rubber relaxation (viscous flow), which can fill minor imperfections on the vial finish.

To confirm component positional offsets are the primary sources of RSF variability, a novel quantification tool—micro-computed tomography (micro-CT)—was used in this study. Micro-CT provided images for quantification of positional offsets of the cap and stopper that directly correlated with RSF fluctuations. Serum stoppers and lyophilization stoppers are comparable in RSF variations, although lyophilization stoppers are more robust in CCI. The use of micro-CT provides a nondestructive and innovative tool in quantitatively analyzing component features of capped vials that would otherwise be difficult to investigate.

Pyrazinamide (PZA) is a cornerstone antimicrobial drug used exclusively for the treatment of tuberculosis (TB). Due to its ability to shorten drug therapy by 3 months and reduce disease relapse rates, PZA is considered an irreplaceable component of standard first-line short-course therapy for drug-susceptible TB and second-line treatment regimens for multidrug-resistant TB. Despite over 60 years of research on PZA and its crucial role in current and future TB treatment regimens, the mode of action of this unique drug remains unclear. Defining the mode of action for PZA will open new avenues for rational design of novel therapeutic approaches for the treatment of TB. In this review, we discuss the four prevailing models for PZA action, recent developments in modulation of PZA susceptibility and resistance, and outlooks for future research and drug development.

Technologies allowing genetic sequencing of the human microbiome are opening new realms to discovery. The host microbiota substantially impacts immune responses both in immune-mediated inflammatory diseases (IMIDs) and in tumors affecting tissues beyond skin and mucosae. However, a mechanistic link between host microbiota and cancer or IMIDs has not been well established. Here, we propose T helper 17 (T_H17) lymphocytes as the connecting factor between host microbiota and rheumatoid or psoriatic arthritides, multiple sclerosis, breast or ovarian cancer, and multiple myeloma. We theorize that similar mechanisms favor the expansion of gut-borne T_H17 cells and their deployment at the site of inflammation in extraborder IMIDs and tumors, where T_H17 cells are driving forces. Thus, from a pathogenic standpoint, tumors may share mechanistic routes with IMIDs. A review of similarities and divergences in microbiota-T_H17 cell interactions in IMIDs and cancer sheds light on previously ignored pathways in either one of the two groups of pathologies and identifies novel therapeutic avenues.

The substantial discrepancy between the strong effects of functional foods and various drugs, especially traditional Chinese medicines (TCMs), and the poor bioavailability of these substances remains a perplexing problem. Understanding the gut microbiota, which acts as an effective bioreactor in the human intestinal tract, provides an opportunity for the redefinition of bioavailability. Here, we discuss four different pathways associated with the role of the gut microbiota in the transformation of parent compounds to beneficial or detrimental small molecules, which can enter the body’s circulatory system and be available to target cells, tissues, and organs. We further describe and propose effective strategies for improving bioavailability and alleviating side effects with the help of the gut microbiota. This review also broadens our perspectives for the discovery of new medicinal components.

In bacterial populations, quorum sensing (QS) systems participate in the regulation of specialization processes and regulate collective behaviors that mediate interactions and allow survival of the species. In Gram-positive bacteria, QS systems of the RRNPP family (Rgg, Rap, NprR, PlcR, and PrgX) consist of intracellular receptors and their cognate signaling peptides. Two of these receptors, Rap and NprR, have regained attention in Bacillus subtilis and the Bacillus cereus group. Some Rap proteins, such as RapH and Rap60, are multifunctional and/or redundant in function, linking the specialization processes of sporulation and competence, as well as global expression changes in the transition phase in B. subtilis. NprR, an evolutionary intermediate between Rap and RRNPP transcriptional activators, is a bifunctional regulator that modulates sporulation initiation and activates nutrient scavenging genes. In this review, we discuss how these receptors switch between functions and connect distinct signaling pathways. Based on structural evidence, we propose that RapH and Rap60 should be considered moonlighting proteins. Additionally, we analyze an evolutionary and ecological perspective to understand the multifunctionality and functional redundancy of these regulators in both Bacillus spp. and non-Bacillus Firmicutes. Understanding the mechanistic, structural, ecological, and evolutionary basis for the multifunctionality and redundancy of these QS systems is a key step for achieving the development of innovative technologies for health and agriculture.

Streptococcus pyogenes (Lancefield group A Streptococcus [GAS]) is a β-hemolytic human-selective pathogen that is responsible for a large number of morbid and mortal infections in humans. For efficient infection, GAS requires different types of surface proteins that provide various mechanisms for evading human innate immune responses, thus enhancing pathogenicity of the bacteria. Many such virulence-promoting proteins, including the major surface signature M protein, are translocated after biosynthesis through the cytoplasmic membrane and temporarily tethered to this membrane via a type 1 transmembrane domain (TMD) positioned near the COOH terminus. In these proteins, a sorting signal, LPXTG, is positioned immediately upstream of the TMD, which is cleaved by the membrane-associated transpeptidase, sortase A (SrtA), leading to the covalent anchoring of these proteins to newly emerging l-Ala–l-Ala cross-bridges of the growing peptidoglycan cell wall. Herein, we show that inactivation of the srtA gene in a skin-tropic pattern D GAS strain (AP53) results in retention of the M protein in the cell membrane. However, while the isogenic AP53 srtA strain is attenuated in overall pathogenic properties due to effects on the integrity of the cell membrane, our data show that the M protein nonetheless can extend from the cytoplasmic membrane through the cell wall and then to the surface of the bacteria and thereby retain its important properties of productively binding and activating fluid-phase host plasminogen (hPg). The studies presented herein demonstrate an underappreciated additional mechanism of cell surface display of bacterial virulence proteins via their retention in the cell membrane and extension to the GAS surface.

IMPORTANCE Group A Streptococcus pyogenes (GAS) is a human-specific pathogen that produces many surface factors, including its signature M protein, that contribute to its pathogenicity. M proteins undergo specific membrane localization and anchoring to the cell wall via the transpeptidase sortase A. Herein, we explored the role of sortase A function on M protein localization, architecture, and function, employing, a skin-tropic GAS isolate, AP53, which expresses a human plasminogen (hPg)-binding M (PAM) Protein. We showed that PAM anchored in the cell membrane, due to the targeted inactivation of sortase A, was nonetheless exposed on the cell surface and functionally interacted with host hPg. We demonstrate that M proteins, and possibly other sortase A-processed proteins that are retained in the cell membrane, can still function to initiate pathogenic processes by this underappreciated mechanism.

Diadenosine tetraphosphate (Ap₄A) is a dinucleotide found in both prokaryotes and eukaryotes. In bacteria, its cellular levels increase following exposure to various stress signals and stimuli, and its accumulation is generally correlated with increased sensitivity to a stressor(s), decreased pathogenicity, and enhanced antibiotic susceptibility. Ap₄A is produced as a by-product of tRNA aminoacylation, and is cleaved to ADP molecules by hydrolases of the ApaH and Nudix families and/or by specific phosphorylases. Here, considering evidence that the recombinant protein YqeK from Staphylococcus aureus copurified with ADP, and aided by thermal shift and kinetic analyses, we identified the YqeK family of proteins (COG1713) as an unprecedented class of symmetrically cleaving Ap₄A hydrolases. We validated the functional assignment by confirming the ability of YqeK to affect in vivo levels of Ap₄A in B. subtilis. YqeK shows a catalytic efficiency toward Ap₄A similar to that of the symmetrically cleaving Ap₄A hydrolases of the known ApaH family, although it displays a distinct fold that is typical of proteins of the HD domain superfamily harboring a diiron cluster. Analysis of the available 3D structures of three members of the YqeK family provided hints to the mode of substrate binding. Phylogenetic analysis revealed the occurrence of YqeK proteins in a consistent group of Gram-positive bacteria that lack ApaH enzymes. Comparative genomics highlighted that yqeK and apaH genes share a similar genomic context, where they are frequently found in operons involved in integrated responses to stress signals.

IMPORTANCE Elevation of Ap₄A level in bacteria is associated with increased sensitivity to heat and oxidative stress, reduced antibiotic tolerance, and decreased pathogenicity. ApaH is the major Ap₄A hydrolase in gamma- and betaproteobacteria and has been recently proposed as a novel target to weaken the bacterial resistance to antibiotics. Here, we identified the orphan YqeK protein family (COG1713) as a highly efficient Ap₄A hydrolase family, with members distributed in a consistent group of bacterial species that lack the ApaH enzyme. Among them are the pathogens Staphylococcus aureus, Streptococcus pneumoniae, and Mycoplasma pneumoniae. By identifying the player contributing to Ap₄A homeostasis in these bacteria, we disclose a novel target to develop innovative antibacterial strategies.

An aberrant bi-apical Follicucullus specimen (Albaillellaria, Radiolaria) has been discovered from an upper Guadalupian (Middle Permian) chert block of the Kamiaso Unit of the Mino terrane, central Japan. If this specimen was formed with double malformation, it would be the oldest record of this phenomenon in radiolarians and the first record of its kind in Albaillellaria.

Despite the importance of the Bering Sea for subarctic oceanography and climate, relatively little is known of the foraminifera from the extensive Aleutian Basin. We report the occurrence of modern deep-water agglutinated foraminifera collected at seven sites cored during Integrated Ocean Drilling Program (IODP) Expedition 323 in the Bering Sea. Assemblages collected from core-top samples contained 32 genera and 50 species and are described and illustrated here for the first time. Commonly occurring species include typical deep-water Rhizammina, Reophax, Rhabdammina, Recurvoides and Nodulina. Assemblages from the northern sites also consist of accessory Cyclammina, Eggerelloides and Glaphyrammina, whilst those of the Bowers Ridge sites consist of other tubular genera and Martinottiella. Of the studied stations with the lowest dissolved oxygen concentrations, the potentially Bering Sea endemic Eggerelloides sp. 1 inhabits the northern slope, which has the highest primary productivity, and the potentially endemic Martinottiella sp. 3 inhabits Bowers Ridge, which has the lowest oxygen concentrations but relatively low annual productivity. Martinottiella sp. 3, with open pores on its test surface, has previously been reported in Pliocene to Recent material from Bowers Ridge. Despite relatively small sample sizes, ecological constraints may imply that the Bering Sea experienced high productivity and reduced oxygen at times since at least the Pliocene. We note the partially endemic nature of the agglutinated foraminiferal assemblages, which may at least in part be due to basin restriction, the geologically long time period of reduced oxygen, and high organic carbon flux. Our results indicate the importance of gathering further surface sample data from the Aleutian Basin.

The Henry Buckley Collection of Planktonic Foraminifera at the Natural History Museum in London (NHMUK) consists of 1665 single-taxon slides housing 23 897 individuals from 203 sites in all the major ocean basins, as well as a vast research library of Scanning Electron Microscope (SEM) photomicrographs. Buckley picked the material from the NHMUK Ocean-Bottom Deposit Collection and also from fresh tow samples. However, his collection remains largely unused as he was discouraged by his managers in the Mineralogy Department from working on or publicizing the collection. Nevertheless, Buckley published pioneering papers on isotopic interpretation of oceanographic and climatic change and was one of the first workers to investigate foraminiferal wall structure using the SEM technique. Details of the collection and images of each slide are available via the NHMUK Data Portal (http://dx.doi.org/10.5519/0035055). The Buckley Collection and its associated Ocean-Bottom Deposit Collection have great potential for taxon-specific studies as well as geochemical work, and both collections are available on request.

A new larger benthic porcelaneous foraminifer of soritid affinity is described as Tarburina zagrosiana n. gen., n. sp. from the late Maastrichtian of the Tarbur Formation, Zagros Zone, SW Iran. It occurs in foraminiferal–dasycladalean wackestones and packstones, in association with Loftusia ssp., dicyclinids/cuneolinids, Neobalkhania bignoti Cherchi & Schroeder, Gyroconulina columellifera Schroeder & Darmoian, Spirolina? farsiana Schlagintweit & Rashidi, Broeckina cf. dufrenoyi (d'Archiac), other benthic foraminifers, and dasycladalean algae. Due to its elongate test and marginal chamber subdivision by aligned vertical partitions, Tarburina n. gen. can be compared with representatives of the Praerhapydionininae. The interio-marginal slit-like foramina/aperture of Tarburina represents an outstanding feature in complex porcelaneous taxa. The monospecific genus Tarburina is considered a Maastrichtian newcomer within the Late Cretaceous Global Community Maturation cycle of larger benthic foraminifera. A biostratigraphic and palaeobiogeographical restriction seems possible, as reported for many other Late Cretaceous larger benthic foraminifera.

Planktonic foraminifera are a source of important geochemical, palaeoceanographic, and palaeontological data. However, many aspects of their ecology remain poorly understood, including whether or not gross morphology has an ecological function. Here, we measure the force needed to crush multiple planktonic foraminiferal morphotypes from modern core top and tow samples. We find significant differences in the resistance of different morphotypes to compressional force. Three species, Globorotalia tumida (biconvex, keeled), Menardella menardii (discoidal, keeled), Truncorotalia truncatulinoides (conical, keeled), require on average 59% more force (1.07 v. 0.47 N) to crush than the least resistant species (Orbulina universa and Trilobatus sacculifer) in core-top samples. Towed samples of pre-gametogenic individuals also show significant differences of the same magnitude (0.693 v. 0.53 N) between the conical (T. truncatulinoides) and globular/spherical morphologies (Globoconella inflata and O. universa). We hypothesize that the greater compressional strength of certain shapes confers a fitness advantage against predators and could contribute to the repeated, convergent evolution of keeled, conical and bi-convex forms in planktonic foraminifer lineages.

Supplementary material: Raw data for all crushing experiments, wall thickness measurements, and results for all pair-wise Kolmogorov-Smirnov Tests are available at https://doi.org/10.6084/m9.figshare.c.3725236.v1

An exceptionally well-preserved specimen of the articulated rhodophyte Permocalculus, compared with P. tenellus sensu Elliott, 1955, is described from fine-grained Upper Permian limestones of the Khuff Formation of Saudi Arabia. Longitudinal medullary and sheaf-like cortical filaments extend through the uniserial series of elongate-globular, concave- and convex-terminating, interlocking segments for which they are interpreted to have functioned in articulation. The filaments tend to splay and branch laterally into the cortex where they terminate at the pores. At the terminal aperture, the filaments extend as bifurcating and possibly trifurcating branches and may serve as the origin of a new segment. Numerous elongate-globular chambers, up to five in each row and intimately involved with the filaments, are developed in the outer medulla and are considered to represent reproductive sporangia. The specimen is considered to have occupied predominantly low-energy, normal to slightly elevated salinity, shallow conditions within the subtidal regime of a lagoon.

Assemblages of upper lower through upper Miocene Discoaster spp. have been quantified from Integrated Ocean Drilling Program (IODP) Site U1338 in the eastern equatorial Pacific Ocean. These assemblages can be grouped into five broad morphological categories: six-rayed with bifurcated ray tips, six-rayed with large central areas, six-rayed with pointed ray tips, five-rayed with bifurcated ray tips and five-rayed with pointed ray tips. Discoaster deflandrei dominates the assemblages prior to 15.8 Ma. The decline in abundance of D. deflandrei close to the early–middle Miocene boundary occurs together with the evolution of the D. variabilis group, including D. signus and D. exilis. Six-rayed discoasters having large central areas become a prominent member of the assemblages for a 400 ka interval in the late middle Miocene. Five- and six-rayed forms having pointed tips become prominent in the early late Miocene and show a strong antiphasing relationship with the D. variabilis group. Discoaster bellus completely dominates the Discoaster assemblages for a 400 ka interval in the middle late Miocene. Abundances of all discoasters, or discoasters at the species level, show only (surprisingly) weak correlations to carbonate contents or oxygen and carbon isotopes of bulk sediment when calculated over the entire sample interval.

ABSTRACTThe Standard Days Method (SDM), a modern fertility awareness-based family planning method, has been introduced in 30 countries since its development in 2001. It is still unclear to what extent the SDM was mainstreamed within the family planning method mix, particularly in low- and middle-income country (LMIC) settings, where the SDM had been introduced by donors and implementing partners. This review of implementation science publications on the SDM in LMICs first looked at community pilot studies of the SDM to determine the acceptability of the method; correct use and efficacy rates; demographics of users; and changes to contraceptive prevalence rates and family planning behaviors, especially among men and couples. Then, we examined the status of the SDM in the 16 countries that had attempted to scale up the method within national family planning protocols, training, and service delivery. At the community level, evidence demonstrated a high level of acceptability of the method; efficacy rates comparable to the initial clinical trials; diversity in demographic characteristics of users, including first-time or recently discontinued users of family planning; increased male engagement in family planning; and improved couple's communication. Nationally, few countries had scaled up the SDM due to uneven stakeholder engagement, lackluster political will, and competing resource priorities. Results of this review could help policy makers determine the added value of the SDM in the contraceptive method mix and identify potential barriers to its implementation moving forward.

ABSTRACTBackground:Female sex workers (FSWs) in Cameroon commonly have unmet need for contraception posing a high risk of unintended pregnancy. Unintended pregnancy leads to a range of outcomes, and due to legal restrictions, FSWs often seek unsafe abortions. Aside from the high burden of HIV, little is known about the broader sexual and reproductive health of FSWs in Cameroon.Methods:From December 2015 to October 2016, we recruited FSWs aged ≥18 years through respondent-driven sampling across 5 Cameroonian cities. Cross-sectional data were collected through a behavioral questionnaire. Modified-robust Poisson regression was used to approximate adjusted prevalence ratios (aPR) for TOP and current use of effective nonbarrier contraception.Results:Among 2,255 FSWs (median age 28 years), 57.6% reported history of unintended pregnancy and 40.0% reported prior TOP. In multivariable analysis, TOP history was associated with current nonbarrier contraceptive use (aPR=1.23, 95% confidence interval [CI]=1.07, 1.42); ever using emergency contraception (aPR=1.34, 95% CI=1.17, 1.55); >60 clients in the past month (aPR=1.29, 95% CI= 1.07, 1.54) compared to ≤30; inconsistent condom use with clients (aPR=1.17, 95% CI=1.00, 1.37); ever experiencing physical violence (aPR=1.24, 95% CI=1.09, 1.42); and older age. Most (76.5%) women used male condoms for contraception, but only 33.2% reported consistent condom use with all partners. Overall, 26.4% of women reported currently using a nonbarrier contraceptive method, and 6.2% reported using a long-acting method. Previous TOP (aPR=1.41, 95%CI=1.16, 1.72) and ever using emergency contraception (aPR=2.70, 95% CI=2.23, 3.26) were associated with higher nonbarrier contraceptive use. Recent receipt of HIV information (aPR=0.72, 95% CI=0.59, 0.89) and membership in an FSW community-based organization (aPR=0.73, 95% CI=0.57, 0.92) were associated with lower use nonbarrier contraceptive use.Conclusions:Experience of unintended pregnancies and TOP is common among FSWs in Cameroon. Given the low use of nonbarrier contraceptive methods and inconsistent condom use, FSWs are at risk of repeat unintended pregnancies. Improved integration of client-centered, voluntary family planning within community-led HIV services may better support the sexual and reproductive health and human rights of FSWs consistent with the United Nations Declaration of Human Rights.

BACKGROUND

Continuous glucose monitoring (CGM) provides important information to aid in achieving glycemic targets in people with diabetes.

OBJECTIVE

To investigate factors related to glycemic management among members of a professional cycling team with type 1 diabetes over a 7-day Union Cycliste Internationale World Tour stage race.

OBJECTIVE

Debate continues regarding the influence of dietary fats and sugars on the risk of developing metabolic diseases, including insulin resistance and nonalcoholic fatty liver disease (NAFLD). We investigated the effect of two eucaloric diets, one enriched with saturated fat (SFA) and the other enriched with free sugars (SUGAR), on intrahepatic triacylglycerol (IHTAG) content, hepatic de novo lipogenesis (DNL), and whole-body postprandial metabolism in overweight males.

OBJECTIVE

Hispanics/Latinos are the largest ethnic/racial group in the U.S., have the highest prevalence of diabetes, and are at increased risk for neurodegenerative disorders. Currently, little is known about the relationship between diabetes and cognitive decline and disorders among diverse Hispanics/Latinos. The purpose of this study is to clarify these relationships in diverse middle-aged and older Hispanics/Latinos.

OBJECTIVE

Nonalbuminuric diabetic kidney disease (DKD) has become the prevailing phenotype in patients with type 2 diabetes. However, it remains unclear whether its prognosis is poorer than that of other DKD phenotypes.

OBJECTIVE

Most individuals with type 2 diabetes also have obesity, and treatment with some diabetes medications, including insulin, can cause further weight gain. No approved chronic weight management medications have been prospectively investigated in individuals with overweight or obesity and insulin-treated type 2 diabetes. The primary objective of this study was to assess the effect of liraglutide 3.0 mg versus placebo on weight loss in this population.

OBJECTIVE

To report U.S. national population-based rates and trends in diabetic ketoacidosis (DKA) and hyperglycemic hyperosmolar state (HHS) among adults, in both the emergency department (ED) and inpatient settings.

OBJECTIVE

To assess whether the risk of subsequent lower-limb amputations and death following an initial toe amputation among individuals with diabetes has changed over time and varies by demographic characteristics and geographic region.