Many parents, educators, and policy makers see great potential for leveraging tools like laptop computers, tablets, and smartphones in the classrooms of the world. Although increasing students’ technology access may be associated with increased student achievement, there is little research directly investigating objective measures of student achievement. This study addresses the short-term and long-term quantitative impacts of one of the world’s first school efforts to provide Kindergarten through 3rd grade classrooms with 1:1 iPad access and a range of English Language Arts (ELA) and math Apps. This report summarizes two investigations conducted during this iPad implementation. First, a 9-week pre/post randomized control trial was conducted in which 8 Kindergarten classes used literacy and numeracy apps while another 8 Kindergarten classes used their traditional (non-iPad) resources. At the end of this short implementation period, slightly stronger literacy performance gains were observed in the iPad settings. In a second longitudinal study, three years of assessment data were explored before and after the 1:1 iPad implementation in grades K to 2. Results from the longitudinal study provide emerging evidence of potential increases in ELA achievement, but no consistent results in math achievement. This paper adds to the sparse literature in this area and provides a springboard for further research.

Teaching advanced programming can be a challenge, especially when the students are pursuing different majors with diverse analytical and problem-solving capabilities. The purpose of this paper is to explore the efficacy of using a particular problem as a vehicle for imparting a broad set of programming concepts and problem-solving techniques. We present a classic brain teaser that is used to communicate and demonstrate advanced software development concepts and techniques. Our results show that students with varied academic experiences and goals, assuming at least one procedural/structured programming pre-requisite, can benefit from and also be challenged by such an exercise. Although this problem has been used by others in the classroom, we believe that our use of this problem in imparting such a broad range of topics to a diverse student population is unique.

Aim/Purpose: Compared student academic performance on specific course requirements in a C# programming course across three instructional approaches: traditional, online, and flipped. Background: Addressed the following research question: When compared to the online and traditional instructional approaches, does the flipped instructional approach have a greater impact on student academic performance with specific course requirements in a C# programming course? Methodology: Quantitative research design conducted over eight 16-week semesters among a total of 271 participants who were undergraduate students en-rolled in a C# programming course. Data collected were grades earned from specific course requirements and were analyzed with the nonparametric Kruskal Wallis H-Test using IBM SPSS Statistics, Version 23. Contribution: Provides empirical findings related to the impact that different instructional approaches have on student academic performance in a C# programming course. Also describes implications and recommendations for instructors of programming courses regarding instructional approaches that facilitate active learning, student engagement, and self-regulation. Findings: Resulted in four statistically significant findings, indicating that the online and flipped instructional approaches had a greater impact on student academic performance than the traditional approach. Recommendations for Practitioners: Implement instructional approaches such as online, flipped, or blended which foster active learning, student engagement, and self-regulation to increase student academic performance. Recommendation for Researchers: Build upon this study and others similar to it to include factors such as gender, age, ethnicity, and previous academic history. Impact on Society: Acknowledge the growing influence of technology on society as a whole. Higher education coursework and programs are evolving to encompass more digitally-based learning contexts, thus compelling faculty to utilize instructional approaches beyond the traditional, lecture-based approach. Future Research: Increase the number of participants in the flipped instructional approach to see if it has a greater impact on student academic performance. Include factors beyond student academic performance to include gender, age, ethnicity, and previous academic history.

Aim/Purpose: To identify positive and negative aspects for learning of interactive tablet technology learning activities that promote student engagement and learning. Background: Engaging students in mathematics classes is an on-going challenge for teachers. In 2008 we were offered the opportunity to run interactive activities with a class set of tablet PCs that had just been released on to the market. Since then, we have run these interactive activities continuously with mathematics classes for computing students, albeit with two changes in hardware. Methodology: In the interactive activities, students submit full worked solutions to various problem types (classified as table, text, open or multi-choice) which can then be displayed to the class anonymously, discussed and annotated by the teacher. We surveyed student and staff perceptions and monitored academic performance. Contribution: We have over 10 years of results, observations, and experience from 2008, when tablet technologies were new and expensive, to the current time, when modern tablets with styli are now affordable. Findings: There was a significant increase in higher grades although pass rates did not increase significantly. Over the ten year period of the study, perceptions of students and staff about how this technology impacted on student learning were consistently positive. The majority of students found all problem types useful for learning even those they rated “too hard” or “too easy”. Benefits included increased feedback, peer learning and engagement. Recommendations for Practitioners: We recommend using tablet learning activities to engage students and teachers and to contribute to learning. Impact on Society: This study shows how using tablet technologies for interactive classroom activities can enable and enhance known pedagogies of feedback, peer instruction, and student engagement for mathematics classes. Future Research: We recommend extending this study to include larger classes, and other technical subjects that use symbols and diagrams. In addition, we suggest considering control groups.

Aim/Purpose: The current study was conducted to investigate the students’ perceived satisfaction with the use of a semantic-based online laboratory, which provides students with a search mechanism for laboratory resources, such as instruments and devices. Background: The increasing popularity of using online teaching labs, as an important element of experiential learning in STEM education, is because they represent a collection of integrated tools that allow students and teachers to interact and work collaboratively, whereas they provide an enriched learning content delivery mechanism. Moreover, several research studies have proposed various approaches for online teaching laboratories. However, there are hardly any studies that examine the student satisfaction provided by online laboratories based on students’ experiential learning. Methodology: To measure the effectiveness of the laboratory, we performed a case study in a Computer Fundamentals online course in which undergraduate students were able to manage devices and instruments remotely. Participants were a sample of 50 third semester students of Bachelor’s degree in Information Technology Administration who were divided in experimental and control groups (online laboratory vs. traditional manner). Given a laboratory assignment, students were able to carry out the management of devices and instruments through a LabView virtual environment and web services. The data of the experiment were collected through two questionnaires from both groups. The first is a system usability score (SUS) questionnaire concerning lab usability and the second one students’ cognitive load. Contribution: The results of the study showed a high correlation between usability and cognitive load-satisfaction of students who used the online teaching laboratory compared to the students who did not use it. Findings: On the one hand, the online laboratory provided students with an easy way to share and deploy instruments and devices, thus enhancing system usability. On the other hand, it offered important facilities which enabled students to customize the search for instruments and devices, which certainly had a positive impact on the relationship between cognitive load and satisfaction. Recommendations for Practitioners: In this work we propose an intuitive laboratory interface as well as easiness to use but challenging and capable of providing similar experiences to the traditional laboratory. Recommendation for Researchers: This study is one of the first to analyze the cognitive load-satisfaction relationship and compare it with usability scores. Impact on Society: Our analyses make an important contribution to the literature by suggesting a correlation analysis comparing the results of experimental and control groups that participated in this research work, in terms of usability and cognitive load-satisfaction. Future Research: Future work will also investigate other methodological aspects of instructional design with the aim to improve personalized learning and reinforce collaborative experiences, as well as to deal with problems related to laboratory access, such as authentication, scheduling, and interoperability.

Aim/Purpose: Multi-threaded software design is considered to be difficult, especially to novice programmers. In this study, we explored how students cope with a task that its solution requires a multi-threaded architecture to achieve optimal runtime. Background: An efficient exploit of multicore processors architecture requires computer programs that use parallel programming techniques. However, parallel programming is difficult to understand and apply by novice programmers. Methodology: The students had to address a two-stage problem: (1) design an optimal runtime solution to a given problem with no additional instructions; and (2) provide an optimal runtime multi-threaded design to the same problem. Interviews were conducted with a representative group of students to understand the underlying causes of their provided designs. We used qualitative research methods to gain refined insights regarding the students’ decision making during the design process. To analyze the gained data, we used content analysis tools. Contribution: The case study presented in this paper will help the teacher to stress the merits and limitations of various parallel architectures and confront students with the consequences of their solutions via performances’ benchmark. Findings: Analysis of the student’s solutions to the first stage revealed that the majority of them did not provide a multi-threaded solution ignoring the optimal runtime requirement. At the second stage, seven various architectures were provided differing in the number of involved threads, the data structures used, and the synchronization mechanism employed. The majority of the solutions were sub-optimal and only a few students provided an optimal one. Recommendations for Practitioners: We recommend conducting class discussions that will follow a task similar to the one used in this study. Recommendation for Researchers: To be able to generalize the received results this research should be repeated with larger study participant groups from various academic institutions. Impact on Society: Understanding the difficulties of novice programmers may lead to quality software systems. Future Research: To be able to generalize the received results this research should be repeated with larger study participant groups from various academic institutions.

Aim/Purpose: One of the main objectives of higher education institutions is to provide a high-quality education to their students and reduce dropout rates. This can be achieved by predicting students’ academic achievement early using Educational Data Mining (EDM). This study aims to predict students’ final grades and identify honorary students at an early stage. Background: EDM research has emerged as an exciting research area, which can unfold valuable knowledge from educational databases for many purposes, such as identifying the dropouts and students who need special attention and discovering honorary students for allocating scholarships. Methodology: In this work, we have collected 300 undergraduate students’ records from three departments of a Computer and Information Science College at a university located in Saudi Arabia. We compared the performance of six data mining methods in predicting academic achievement. Those methods are C4.5, Simple CART, LADTree, Naïve Bayes, Bayes Net with ADTree, and Random Forest. Contribution: We tested the significance of correlation attribute predictors using four different methods. We found 9 out of 18 proposed features with a significant correlation for predicting students’ academic achievement after their 4th semester. Those features are student GPA during the first four semesters, the number of failed courses during the first four semesters, and the grades of three core courses, i.e., database fundamentals, programming language (1), and computer network fundamentals. Findings: The empirical results show the following: (i) the main features that can predict students’ academic achievement are the student GPA during the first four semesters, the number of failed courses during the first four semesters, and the grades of three core courses; (ii) Naïve Bayes classifier performed better than Tree-based Models in predicting students’ academic achievement in general, however, Random Forest outperformed Naïve Bayes in predicting honorary students; (iii) English language skills do not play an essential role in students’ success at the college of Computer and Information Sciences; and (iv) studying an orientation year does not contribute to students’ success. Recommendations for Practitioners: We would recommend instructors to consider using EDM in predicting students’ academic achievement and benefit from that in customizing students’ learning experience based on their different needs. Recommendation for Researchers: We would highly endorse that researchers apply more EDM studies across various universities and compare between them. For example, future research could investigate the effects of offering tutoring sessions for students who fail core courses in their first semesters, examine the role of language skills in social science programs, and examine the role of the orientation year in other programs. Impact on Society: The prediction of academic performance can help both teachers and students in many ways. It also enables the early discovery of honorary students. Thus, well-deserved opportunities can be offered; for example, scholarships, internships, and workshops. It can also help identify students who require special attention to take an appropriate intervention at the earliest stage possible. Moreover, instructors can be aware of each student’s capability and customize the teaching tasks based on students’ needs. Future Research: For future work, the experiment can be repeated with a larger dataset. It could also be extended with more distinctive attributes to reach more accurate results that are useful for improving the students’ learning outcomes. Moreover, experiments could be done using other data mining algorithms to get a broader approach and more valuable and accurate outputs.

Aim/Purpose: This study aimed to reveal the effect of the previous Internet-based education (IBE) experiences of the students’ readiness, attitude, and self-control / self-management variables towards the e-learning process, and also to determine their opinions. Background: The institutions have made efforts to ensure the continuity of education through their learning management systems and the necessity of addressing the e-learning process from the perspective of students once again showed itself as an undeniable fact. Accordingly, the necessity to consider holistically the variables of readiness, attitude, and self-control/self-management, which affect students’ adaptation to e-learning process, has once again emerged based on the relevant literature. Methodology: This research based on the simultaneous mixed method considering the previous IBE experiences of 75 Computer Education and Instructional Technology (CEIT) students taking part in the study in Turkey. The quantitative results of the study were analyzed based on the single-group pretest-posttest weak experimental design. Qualitative results were obtained through the structured interview form and set an example for the case study. Contribution: The results showed that regardless of students’ previous Internet-based education (IBE) experience, it is seen that increasing and continuous experience has a significant effect on the readiness, attitude and self-control / self-management variables towards the e-learning process. The main contribution of experimental results showed that IBE experience is effective on individuals’ perceptions of internet self-efficacy, and has an impact on the self-learning skills of individuals. In addition to this, the e-learning experience has an impact on individuals’ self-evaluation. It is also seen that the certificate presented to learners in the e-learning environment has a positive effect on students’ attitudes towards e-learning processes. Finally, the experiences of e-learning processes, the methods used to transfer the content in the learning environment, the motivation and feedback provided to the learner also support the significant difference obtained in terms of readiness, attitude and self-control / self-management. Findings: After the findings were analyzed holistically in depth, it has been observed that; if the contents offered to students in e-learning environments support their professional development, in this case, their attitudes, readiness (excluding the sub-dimension of learner control), and self-control/self-management skills for these environments differ significantly in the posttest. It is also among the results that students having previous IBE experience have not higher awareness levels on online communication self-efficacy, technology use self-efficacy, readiness for e-learning, e-learning predisposition, self-reinforcement, self-control management, although significantly found. The findings regarding the effectiveness of the experimental process are as follows: Although it is possible for the students having previous IBE experience to use these experiences within the course for their personal development, it has been seen that the observed differences regarding students’ readiness, attitude, and self-control/self-management towards e-learning processes arise from the experimental operation. Recommendations for Practitioners: It is recommended for the policy-makers and practitioners that while e-learning platforms were designing, using different methods for delivering the content is as important as making the interaction meaningful and sustainable. In addition to this, to develop a positive attitude it is recommended that individuals’ participation of an e-learning platform should be supported with a certificate. Recommendation for Researchers: Researchers should test the obtained results by a well-structured e-learning platform with their recorded activities on the platform (e.g. in which section was used mostly by a learner etc.). Hence, the impact of IBE experiences might be discussed in an up level framework. Impact on Society: Actually, this study is based on a mix design and the results were also meaningful especially considering the implacable global pandemic. It is clearly understood by this process that e-learning is very important. In line with this, to support the e-learning process (e.g. with the method while delivering the content, well-structured feedback, motivation strategies etc.) and make it sustainable, the increasing of individual’s readiness, attitude, and self-control through the IBE would be indispensable. Future Research: Future studies might focus on the longitudinal methods. It is worth to find out how the students experiences affect the sustainability of the course content, and what should the program developer make to improve their course content in line with the findings of longitudinal studies.

Aim/Purpose: During the education of future engineers and experts in the field of computer science and information communication technology, the achievement of learning outcomes related to different levels of cognitive ability and knowledge dimensions can be a challenge. Background: Teachers need to design an appropriate set of activities for students and combine theory-based knowledge acquisition with practical training in technical skills. Including various activities for formative assessment during the course can positively affect students’ motivation for learning and ensure appropriate and timely feedback that will guide students in further learning. Methodology: The aim of the research presented in this paper is to propose an approach for course delivery in the field of software engineering and to determine whether the use of the approach increases student’s academic achievement. Using the proposed approach, the course Process Modeling for undergraduate students was redesigned and experimental study was conducted. Course results of the students (N=82) who took the new version of the course (experimental group) were compared to the results of the students from the control group (N=66). Contribution: An approach for a blended learning course in the field of software engineering was developed. This approach is based on the formative assessment activities that promote collaboration and the use of digital tools. Newly designed activities are used to encourage a greater level of acquired theoretical content and enhance the acquisition of subject-specific skills needed for practical tasks. Findings: The results showed that students who participated in the formative assessment activities achieved significantly better results. They had significantly higher scores in the main components of assessment compared to the students from the control group. In addition, students from the experimental group expressed positive views about the effectiveness of the used approach. Recommendations for Practitioners: The proposed approach has potential to increase students’ motivation and academic achievements so practitioners should consider to apply it in their own context. Recommendation for Researchers: Researchers are encouraged to conduct additional studies to explore the effectiveness of the approach with different courses and participants as well as to provide further insights regarding its applicability and acceptance by students. Impact on Society: The paper provides an approach and an example of good practice that may be beneficial for the university teachers in the field of computer science, information-communication technology, and engineering. Future Research: In the future, face-to-face activities will be adapted for performance in an online environment. Future work will also include a research on the possibilities of personalization of activities in accordance with the students’ characteristics.

Aim/Purpose: Business analytics is a cross-functional field that is important to implement for a college and has emerged as a critically important core component of the business curriculum. It is a difficult task due to scheduling concerns and limits to faculty and student resources. This paper describes the process of creating a central video repository to serve as a platform for just in time teaching and the impact on student learning outcomes. Background: Industry demand for employees with analytical knowledge, skills, and abilities requires additional analytical content throughout the college of business curriculum. This demand needs other content to be added to ensure that students have the prerequisite skills to complete assignments. Two pedagogical approaches to address this issue are Just-in-Time Teaching (JiTT) and scaffolding, grounded in the Vygoskian concept of “Zone of Proximal Development. Methodology: This paper presents a case study that applies scaffolding and JiTT teaching to create a video repository to add business analytics instruction to a curriculum. The California Critical Thinking Skills Test (CCTST) and Major Field Test (MFT) scores were analyzed to assess learning outcomes. Student and faculty comments were considered to inform the results of the review. Contribution: This paper demonstrates a practical application of scaffolding and JiTT theory by outlining the process of using a video library to provide valuable instructional resources that support meaningful learning, promote student academic achievement, and improve program flexibility. Findings: A centrally created library is a simple and inexpensive way to provide business analytics course content, augmenting standard content delivery. Assessment of learning scores showed an improvement, and a summary of lessons learned is provided to guide implications. Recommendations for Practitioners: Pedagogical implications of this research include the observation that producing a central library of instructor created videos and assignments can help address knowledge and skills gaps, augment the learning of business analytics content, and provide a valuable educational resource throughout the college of business curriculum. Recommendation for Researchers: This paper examines the use of scaffolding and JiTT theories. Additional examination of these theories may improve the understanding and limits of these concepts as higher education evolves due to the combination of market forces changing the execution of course delivery. Impact on Society: Universities are tasked with providing new and increasing skills to students while controlling the costs. A centrally created library of instructional videos provides a means of delivering meaningful content while controlling costs. Future Research: Future research may examine student success, including the immediate impact of videos and longitudinally using video repositories throughout the curriculum. Studies examining the approach across multiple institutions may help to evaluate the success of video repositories. Faculty acceptance of centrally created video libraries and assignments should be considered for the value of faculty recruiting and use in the classroom. The economic impact on both the university and students should be evaluated.

Aim/Purpose: The goal of the study was to examine the perceptions of senior academic staff who also serve as policymakers in Israeli colleges of education, regarding the integration of technology in teacher education, and the shift to online learning during the Covid-19 pandemic. There is little research on this issue and consequently, the aim of the present study is to fill this lacuna. Background: In Israel, senior academic staff in colleges of education play a particularly important role in formulating institutional policies and vision regarding the training of preservice teachers. They fulfil administrative functions, teach, and engage in research as part of their academic position. During the Covid-19, they led the shift to online learning. However, there is little research on their perceptions of technology integration in teacher education in general, and during the Covid-19, in particular. Methodology: This qualitative study conducted semi-structured interviews with 25 senior academic staff from 13 academic colleges of education in Israel. Contribution: The study has practical implications for the implementation of technology in teacher education, suggesting the importance of establishing open discourse and collaboration between college stakeholders to enable enactment of a vision for equity-that allows programs to move swiftly from crisis-management to innovation and transformation during the Covid-19 pandemic. Findings: The findings obtained from content analysis of the interviews reveals a central concept: “On both sides of the divide”, and points of intersection in the perceptions of the senior academic staff. The central concept encompassed three themes: (1) centralization - between top-down and bottom-up policies, (2) between innovation and conservation, and (3) between crisis and growth. The findings indicate that in times of crisis, the polarity surrounding issues essential to the organisation’s operation is reduced, and a blend is formed to create a new reality in which the various dichotomies merge. Recommendations for Practitioners: The study has practical implications for the scope of discussions on the implementation of technology in teacher education (formulating a vision and policies, and their translation into practice), suggesting that such discussions should consider the perceptions of policymakers. Recommendation for Researchers: The findings reflect the challenges faced by senior academic staff at colleges of education that reflect the ongoing attempts to negotiate and reconcile different concerns. Impact on Society: The findings have implications for colleges of education that are responsible for pre-service teachers' teaching practices. Future Research: An enacted vision for equity-based educator preparation that allows programs to move swiftly from crisis-management to innovation and transformation. Future research might reveal a more complete picture by investigating a broader spectrum of stakeholders both in Israel and elsewhere. Hence, future research should examine the power relations between senior college staff and external bodies such as the Higher Education Council (which determines higher education policies in Israel).

Aim/Purpose: The teaching of appropriate problem-solving techniques to novice learners in undergraduate software development education is often poorly defined when compared to the delivery of programming techniques. Given the global need for qualified designers of information technology, the purpose of this research is to produce a foundational template for an educational software development methodology grounded in the established literature. This template can be used by third-level educators and researchers to develop robust educational methodologies to cultivate structured problem solving and software development habits in their students while systematically teaching the intricacies of software creation. Background: While software development methodologies are a standard approach to structured and traceable problem solving in commercial software development, educational methodologies for inexperienced learners remain a neglected area of research due to their assumption of prior programming knowledge. This research aims to address this deficit by conducting an integrative review to produce a template for such a methodology. Methodology: An integrative review was conducted on the key components of Teaching Software Development Education, Problem Solving, Threshold Concepts, and Computational Thinking. Systematic reviews were conducted on Computational Thinking and Software Development Education by employing the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) process. Narrative reviews were conducted on Problem Solving and Threshold Concepts. Contribution: This research provides a comprehensive analysis of problem solving, software development education, computational thinking, and threshold concepts in computing in the context of undergraduate software development education. It also synthesizes review findings from these four areas and combines them to form a research-based foundational template methodology for use by educators and researchers interested in software development undergraduate education. Findings: This review identifies seven skills and four concepts required by novice learners. The skills include the ability to perform abstraction, data representation, decomposition, evaluation, mental modeling, pattern recognition, and writing algorithms. The concepts include state and sequential flow, non-sequential flow control, modularity, and object interaction. The teaching of these skills and concepts is combined into a spiral learning framework and is joined by four development stages to guide software problem solving: understanding the problem, breaking into tasks, designing, coding, testing, and integrating, and final evaluation and reflection. This produces the principal finding, which is a research-based foundational template for educational software development methodologies. Recommendations for Practitioners: Focusing introductory undergraduate computing courses on a programming syllabus without giving adequate support to problem solving may hinder students in their attainment of development skills. Therefore, providing a structured methodology is necessary as it equips students with essential problem-solving skills and ensures they develop good development practices from the start, which is crucial to ensuring undergraduate success in their studies and beyond. Recommendation for Researchers: The creation of educational software development methodologies with tool support is an under-researched area in undergraduate education. The template produced by this research can serve as a foundational conceptual model for researchers to create concrete tools to better support computing undergraduates. Impact on Society: Improving the educational value and experience of software development undergraduates is crucial for society once they graduate. They drive innovation and economic growth by creating new technologies, improving efficiency in various industries, and solving complex problems. Future Research: Future research should concentrate on using the template produced by this research to create a concrete educational methodology adapted to suit a specific programming paradigm, with an associated learning tool that can be used with first-year computing undergraduates.

Aim/Purpose: The study seeks to utilize Augmented Reality (AR) in creating virtual laboratories for engineering education, focusing on enhancing teaching methodologies to facilitate student understanding of intricate and theoretical engineering principles while also assessing engineering students’ acceptance of such laboratories. Background: AR, a part of next-generation technology, has enhanced the perception of reality by overlaying virtual elements in the physical environment. The utilization of AR is prevalent across different disciplines, yet its efficacy in facilitating Science, Technology, Engineering, and Mathematics (STEM) education is limited. Engineering studies, a part of STEM learning, involves complex and abstract concepts like machine simulation, structural analysis, and design optimization; these things would be easy to grasp with the help of AR. This restriction can be attributed to their innovative characteristics and disparities. Therefore, providing a comprehensive analysis of the factors influencing the acceptance of these technologies by students - the primary target demographic – and examining the impact of these factors is essential to maximize the advantages of AR while refining the implementation processes. Methodology: The primary objective of this research is to develop and evaluate a tool that enriches the educational experience within engineering laboratories. Utilizing Unity game engine libraries, digital content is meticulously crafted for this tool and subsequently integrated with geo-location functionalities. The tool’s user-friendly interface allows both faculty and non-faculty members of the academic institution to establish effortlessly the virtual laboratory. Subsequently, an assessment of the tool is conducted through the application of the Unified Theory of Acceptance and Use of Technology (UTAUT2) model, involving the administration of surveys to university students to gauge their level of adaptability. Contribution: The utilization of interactive augmented learning in laboratory settings enables educational establishments to realize notable savings in time and resources, thereby achieving sustainable educational outcomes. The study is of great importance due to its utilization of student behavioral intentions as the underlying framework for developing an AR tool and illustrating the impact of learner experience on various objectives and the acceptance of AR in Engineering studies. Furthermore, the research results enable educational institutions to implement AR-based virtual laboratories to improve student experiences strategically, align with learner objectives, and ultimately boost the adaptability of AR technologies. Findings: Drawing on practice-based research, the authors showcase work samples and a digital project of AR-based Virtual labs to illustrate the evaluation of the adaptability of AR technology. Adaptability is calculated by conducting a survey of 300 undergraduate university students from different engineering departments and applying an adaptability method to determine the behavioral intentions of students. Recommendations for Practitioners: Engineering institutions could leverage research findings in the implementation of AR to enhance the effectiveness of AR technology in practical education settings. Recommendation for Researchers: The authors implement a pragmatic research framework aimed at integrating AR technology into virtual AR-based labs for engineering education. This study delves into a unique perspective within the realm of engineering studies, considering students’ perspectives and discerning their behavioral intentions by drawing upon previous research on technology utilization. The research employs various objectives and learner experiences to assess their influence on students’ acceptance of AR technology. Impact on Society: The use of AR in engineering institutions, especially in laboratory practicals, has a significant impact on society, supported by the UTAUT2 model. UTAUT2 model assesses factors like performance, effort expectancy, social influence, and conditions, showing that AR in education is feasible and adaptable. This adaptability helps students and educators incorporate AR tools effectively for better educational results. AR-based labs allow students to interact with complex engineering concepts in immersive settings, enhancing understanding and knowledge retention. This interactive augmented learning for laboratories saves educational institutions significant time and resources, attaining sustainable learning. Future Research: Further research can employ a more comprehensive acceptance model to examine learners’ adaptability to AR technology and try comparing different adaptability models to determine which is more effective for engineering students.

Aim/Purpose: Despite playing a critical role in shaping the future, 70% of undergraduate engineers report low levels of motivation. Student disengagement and a lack of ownership of their learning are significant challenges in higher education, specifically engineering students in the computer science department. This study investigates the various causes of these problems among first-year undergraduate engineers. Background: Student disengagement has become a significant problem, especially in higher education, leading to reduced academic performance, lower graduation rates, and less satisfaction with learning. The study intends to develop approaches that encourage a more interesting and learner-motivated educational environment. Methodology: This research uses a mixed methods approach by combining quantitative data from a survey-based questionnaire with qualitative insights from focus groups to explore intrinsic and extrinsic motivators, instructional practices, and student perceptions of relevance and application of course content. The aim of this method is to make an all-inclusive exploration into undergraduate engineering students’ perspectives on factors contributing to this disengagement and the need for more ownership. Contribution: Inculcating passion for engineering among learners seems demanding, with numerous educational programs struggling with issues such as a lack of interest by students and no personal investment in learning. Understanding the causes is of paramount importance. The study gives suggestions to help teachers or institutions create a more engaged and ownership-based learning environment for engineering students. Findings: The findings revealed a tangled web influencing monotonous teaching styles, limited opportunities and applications, and a perceived gap between theoretical knowledge and real-world engineering problems. It emphasized the need to implement more active learning strategies that could increase autonomy and a stronger sense of purpose in their learning journey. It also highlights the potential use of technology in promoting student engagement and ownership. Further research is needed to explore optimal implementation strategies for online simulations, interactive learning platforms, and gamification elements in the engineering curriculum. Recommendations for Practitioners: It highlights the complex interplay of intrinsic and extrinsic motivation factors and the need to re-look at instructional practice and emphasize faculty training to develop a more student-centered approach. It also stresses the need to look into the relevance and application of the course content. Recommendation for Researchers: More work needs to be done with a larger, more diverse sample population across multiple institutions and varied sociocultural and economic backgrounds. Impact on Society: Enhancing learners’ educational experience can result in creating a passionate and competent team of engineers who can face future obstacles fearlessly and reduce the production of half-baked graduates unprepared for the profession’s challenges. Future Research: Conduct long-term studies to assess the impact of active learning and technology use on student outcomes and career readiness. Investigate scaling up successful strategies across diverse engineering programs. See if promising practices work well everywhere.

Aim/Purpose: The aim of the study is to test whether the perception of self-regulated learning during text reading in online teacher education is improved by using a digital tool for the use of metacognitive strategies for planning, monitoring, and self-assessment. Background: The use of self-regulated learning is important in reading skills, and for students to develop self-regulated learning, their teachers must master it. Therefore, teaching strategies for self-regulated learning in teacher education is essential. Methodology: The sample size was 252 participants with the tool used by 42% or the participants. A quasi-experimental design was used in a pre-post study. ARATEX-R, a text-based scale, was used to evaluate self-regulated learning. The 5-point Likert scale includes the evaluation of five dimensions: planning strategies, cognition management, motivation management, comprehension assessment and context management. A Generalized Linear Model was used to analyse the results. Contribution: Using the tool to self-regulate learning has led to an improvement during text reading, especially in the dimensions of motivation management, planning management and comprehension assessment, key dimensions for text comprehension and learning. Findings: Participants who use the app perceive greater improvement, especially in the dimensions of motivation management (22,3%), planning management (19.9%) and comprehension assessment (24,6%), which are fundamental dimensions for self-regulation in text reading. Recommendations for Practitioners: This tool should be included in teacher training to enable reflection during the reading of texts, because it helps to improve three key types of strategies in self-regulation: (1) planning through planning management, (2) monitoring through motivation management and comprehension assessment, and (3) self-assessment through comprehension assessment. Recommendation for Researchers: The success of the tool suggests further study for its application in other use cases: other student profiles in higher education, other teaching modalities, and other educational stages. These studies will help to identify adaptations that will extend the tool’s use in education. Impact on Society: The use of Metadig facilitates reflection during the reading of texts in order to improve comprehension and thus self-regulate the learning of content. This reflection is crucial for students’ knowledge construction. Future Research: Future research will focus on enhancing the digital tool by adding features to support the development of cognition and context management. It will also focus on how on adapting the tool to help other types of learners.

Aim/Purpose: This mixed-methods study aims to examine factors influencing academicians’ intentions to continue using AI-based chatbots by integrating the Task-Technology Fit (TTF) model and social network characteristics. Background: AI-powered chatbots are gaining popularity across industries, including academia. However, empirical research on academicians’ adoption behavior is limited. This study proposes an integrated model incorporating TTF factors and social network characteristics like density, homophily, and connectedness to understand academics’ continuance intentions. Methodology: A qualitative study involving 31 interviews of academics from India examined attitudes and the potential role of social network characteristics like density, homophily, and connectedness in adoption. Results showed positive sentiment towards chatbots and themes on how peer groups accelerate diffusion. In the second phase, a survey of 448 faculty members from prominent Indian universities was conducted to test the proposed research model. Contribution: The study proposes and validates an integrated model of TTF and social network factors that influence academics’ continued usage intentions toward AI chatbots. It highlights the nuanced role of peer networks in shaping adoption. Findings: Task and technology characteristics positively affected academics’ intentions to continue AI chatbot usage. Among network factors, density showed the strongest effect on TTF and perceived usefulness, while homophily and connectedness had partial effects. The study provides insights into designing appropriate AI tools for the academic context. Recommendations for Practitioners: AI chatbot designers should focus on aligning features to academics’ task needs and preferences. Compatibility with academic work culture is critical. Given peer network influences, training and demonstrations to user groups can enhance adoption. Platforms should have capabilities for collaborative use. Targeted messaging customized to disciplines can resonate better with academic subgroups. Multidisciplinary influencers should be engaged. Concerns like plagiarism risks, privacy, and job impacts should be transparently addressed. Recommendation for Researchers: More studies are needed across academic subfields to understand nuanced requirements and barriers. Further studies are recommended to investigate differences across disciplines and demographics, relative effects of specific network factors like size, proximity, and frequency of interaction, the role of academic leadership and institutional policies in enabling chatbot adoption, and how AI training biases impact usefulness perceptions and ethical issues. Impact on Society: Increased productivity in academia through the appropriate and ethical use of AI can enhance quality, access, and equity in education. AI can assist in mundane tasks, freeing academics’ time for higher-order objectives like critical thinking development. Responsible AI design and policies considering socio-cultural aspects will benefit sustainable growth. With careful implementation, it can make positive impacts on student engagement, learning support, and research efficiency. Future Research: Conduct longitudinal studies to examine the long-term impacts of AI chatbot usage in academia. Track usage behaviors over time as familiarity develops. Investigate differences across academic disciplines and roles. Requirements may vary for humanities versus STEM faculty or undergraduate versus graduate students. Assess user trust in AI and how it evolves with repeated usage, and examine trust-building strategies. Develop frameworks to assess pedagogical effectiveness and ethical risks of conversational agents in academic contexts.

The present study attempts to find out the determinants of FinTech adoption for financial inclusion by a microfinance institution in India. The factors such as efficiency, consistency, convenience, reliability are taken as predictors of organisational attitude. Similarly, organisational attitude, ease of use, and perceived benefits are considered as antecedents of organisational adoption intention of FinTech in microfinance institutions of India. The purposive sampling technique was used to get a filled survey instrument by target samples. The results indicate that convenience and consistency in the use of FinTech applications build a favourable attitude to adopt it. Furthermore, perceived benefits are the most important antecedents of the adoption intention of FinTech in the microfinance institution in India. Additionally, the reliability of the application has a positive but insignificant impact on organisational attitude to adopt FinTech. The implications of the present study are discussed.

Nostalgia has an intrinsic association with consumer behaviour. Retrieval of memories drives emotions among consumers and reinforces experience-led buying decisions. Despite nostalgia, and consumption being a common practice at various times in life, issues regarding the nostalgia stimuli on customers' perceptions and buying decisions remain less explored. This article aims at exploring the consumption pattern of adult consumers by analysing the influence of nostalgic behaviour referring to the autobiographic memories and social motivations. It describes the purchase intentions and consumption pattern among adult consumers in the context of self-reference criteria based on nostalgic memories and social motivations. This article offers constructive understanding on establishing relationship between nostalgic memories and consumption pattern over the temporal framework and establishing the brand loyalty and hedonic satisfaction. It contributes to the existing literature by critically examining the theoretical concepts and empirical findings of previous studies on perceptions of consumers on nostalgic emotions and their role in making buying decisions.

Badminton, as a fast and highly technical sport, requires high accuracy in identifying athletes' swing movements. Accurately identifying different swing movements is of great significance for technical analysis, coach guidance, and game evaluation. To improve the recognition accuracy of badminton players' swing movements, this text is based on an improved dense trajectory algorithm to improve the accuracy of recognising badminton players' swing movements. The features are efficiently extracted and encoded. The results on the KTH, UCF Sports, and Hollywood2 datasets demonstrated that the improved algorithm achieved recognition accuracy of 94.2%, 88.2%, and 58.3%, respectively. Compared to traditional methods, the innovation of research lies in optimised feature extraction methods, efficient algorithm design, and accurate action recognition. These results provide new ideas for the research and application of badminton swing motion recognition.

This paper explores innovative ideas and strategies for promoting environmental sustainability within the hotel industry, with the goal of streamlining these concepts for practical application in the industry and facilitating future academic research. The research methodology encompassed extensive online desk research, yielding a collection of 87 articles that were subject to thorough analysis. Additionally, personal consultations were conducted with industry experts to align their insights with the identified innovative ideas. To facilitate comprehension, appropriate terminology was assigned to these concepts. Subsequently, a post-discussion phase was conducted, engaging in one-on-one sessions with five industry experts to distil these insights into four distinct directions. This paper holds potential value for both industry stakeholders and academics, serving as a structured compendium of ideas and innovations crucial for advancing sustainability in the hotel sector. Moreover, it provides a solid foundation for further academic research.

The study aims to unveil the various determinants that drive the adoption of e-governance services (EGS). Using the UTAUT 3 model, the research investigated these factors within the Indian context. A purposive sampling technique was utilised to collect the samples from 680 respondents through the online survey method. Furthermore, the study employs structural equation modelling (SEM) to examine the structural relationships between the UTAUT3 model's dimensions in the context of e-governance. Findings revealed that the UTAUT3 model adequately predicts the intention to adopt EGS. The present study addressed a significant gap in the literature on EGS and technology adoption by establishing a relationship between different dimensions of the UTAUT3 model and actual usage of EGS. The findings have implications for practitioners and policymakers as they throw light on the effective implementation of e-governance programs, which are essential for providing the citizens with high-quality services.

This study explores the connection between mentorship and sustainable development (SD) within three major perspectives of sustainable development, such as social, environmental, and economic perspectives from China. Second, the study revealed the relationship between entrepreneurship and SD. Third, a moderation influence of innovation management (IM) was observed among the proposed nexuses of mentorship, entrepreneurship, and SD. To this end, a total of 535 questionnaires were eventually utilised with the support of SmartPLS and the structure equation modelling (SEM) approach. A positive connection was confirmed between mentorship and SD. The outcome uncovered a positive correlation between entrepreneurship and SD. In addition, a moderation of IM was found between mentorship, entrepreneurship, and SD. The study enlists several interesting lines about mentorship, entrepreneurship, and IM that might help to improve SD in terms of social, environmental, and economic perspectives. Besides, the study provides various implications for management and states the weaknesses along with the future directions for worldly researchers.

To assess a country's economic outlook and achieve higher economic growth, econometric models and prediction techniques are significant tools. Policymakers are always concerned with the correct future estimates of economic variables to take the right economic decisions, design better policies and effectively implement them. Therefore, there is a need to improve the predictive accuracy of the existing models and to use more sophisticated and superior algorithms for accurate forecasting. Deep learning models like recurrent neural networks are considered superior for forecasting as they provide better predictive results as compared to many of the econometric models. Against this backdrop, this paper presents the feasibility of using different deep-learning neural network architectures for trade forecasting. It predicts export trade using different recurrent neural architectures such as 'vanilla recurrent neural network (VRNN)', 'bi-directional long short-term memory network (Bi-LSTM)', 'bi-directional gated recurrent unit (Bi-GRU)' and a hybrid 'bi-directional LSTM and GRU neural network'. The performances of these models are evaluated and compared using different performance metrics such as Mean Square Error (MSE), Mean Absolute Error (MAE) Root Mean Squared Error (RMSE), Root Mean Squared Logarithmic Error (RMSLE) and coefficient of determination <em>R</em>-squared (<em>R</em>²). The results validated the effective export prediction for India.

Voice Activity Detection (VAD) distinguishes speech segments from noise or silence areas. An efficient and noise-robust VAD system can be widely used for emerging speech technologies such as wireless communication and speech recognition. In this paper, we propose two versions of an unsupervised Arabic VAD method based on the combination of the Short-Time Energy (STE) and the Spectral Centroid (SC) features for formulating a typical threshold to detect speech areas. The first version compares only the STE feature to the threshold (STE-VAD). In contrast, the second compares the SC vector and the threshold (SC-VAD). The two versions of our VAD method were tested on 770 sentences of the Arabphone corpus, which were recorded in clean and noisy environments and evaluated under different values of Signal-to-Noise-Ratio. The experiments demonstrated the robustness of the STE-VAD in terms of accuracy and Mean Square Error.

This article presents a case study that outlines the potential of DigiBot technology, an interactive automated response program, in mobile open learning (MOL) for business subjects. The study, which draws on a project implemented in Sub-Saharan Africa, demonstrates the applications of DigiBots delivered via WhatsApp to over 650,000 learners. Employing a mixed-methods approach, the article reports on live event tracking, qualitative observations from facilitators and learning technologists, and a learner survey (<i>N</i> = 304,000). The research offers practical recommendations and proposes a model for scalable DigiBot learning. Findings reveal that in this case, DigiBot MOL had the potential to effectively address two key obstacles in open learning: accessibility and scalability. Leveraging mobile platforms such as WhatsApp mitigates accessibility restrictions, particularly in resource-constrained contexts, while tailored micro-learning enhances scalability.

In the perspective of institutional theory, business education is an institutional field, in which two major institutional forces are accreditations and rankings. In this context, French business schools (BS) have adopted an isomorphic response by starting to engage in research and publishing in academic journals. Studies have discussed their research as a new institutional trajectory. However, what remains unknown is how they differ from each other in such research dynamics. To bring new insights to the discussion, this quantitative study examines, over the period of 2008-2018, the evolution of research of French BS by systematically comparing the 'best' schools with other schools in all analyses. The results indicate a strong isomorphism in terms of publication quantity and productivity, scale of research collaboration and the internationalisation of research. However, these schools are heterogeneous in terms research quality and scale of international research collaboration, reflecting the diversity in their research strategy.

Students in teaching-focused business-schools need a level of assistance and advisement broader and more profound than what is needed in R1&R2 schools. We investigate the informal interdependencies among marketing, finance, operation, and management core courses in these schools. By conducting hypothesis tests on a large dataset, we identify a flexible network showing the preferred sequencing of these courses to improve students' performance as measured by the course grade. Better performances in this context may also lead to higher retention-rates and lower time-to-degree. We recommend taking Finance or Finance and Management as the first course(s). Marketing should be the next course before or concurrent with Operations Management. Regarding the lower division courses, it is recommended to take Statistics before Economics and Accounting courses and Accounting before or concurrent with Economics. We also consider the significant role of a milestone course that links the lower division and core courses.

The value and utility of traditional knowledge in conserving and commercialising genetic resources are increasingly becoming apparent due to advances in biotechnology and bioprospecting. However, the absence of an international legally binding instrument within the WIPO system means that traditional knowledge associated with genetic resources is not sufficiently protected like other forms of intellectual property. This means that indigenous peoples and local communities (IPLCs) do not benefit from the commercial exploitation of these resources. The efficacy of domestic tools to protect traditional knowledge and in balancing the rights of IPLCs and intellectual property rights (IPRs) is still debated. This paper employs a doctrinal research methodology based on desktop research of international and regional law instruments and the Constitution of the Republic of South Africa, 1996, to determine the basis for balancing the protection of genetic resources and associated traditional knowledge with competing interests of IPLCs and IPRs in South Africa.

Dynamic nature of the FMCG sector perpetually provides a tricky challenge for organisational leaders to nurture their employees. High demand for products, less shelf life and tough competitors always challenge the leaders to uphold their products in the market. Due to technology and e-commerce, many new competitors have joined the market, vying with the industry's veterans. Due to their unique business models that match client needs, these firms are expected to boost FMCG industry income in the future. Managers' leadership styles depend primarily on emotional intelligence. This quantitative study examines how emotional intelligence influences West Bengal FMCG senior managers' leadership styles. 500 FMCG managers were selected. PLS-SEM is used to study. Emotionally competent leaders choose transactional and transformational leadership styles depending on the occasion. Managers' transactional leadership style is strongly influenced by their sympathetic awareness, as shown by a path coefficient of 0.755. Transformational leadership style has a path coefficient of 0.693, indicating that managers' empathy affects their organisational management. Thus, sympathetic awareness and emotion regulation predict good management leadership.

Using information criteria is a common method for making a decision about which model to use for forecasting. There are many different methods for evaluating forecasting models, such as MAE, RMSE, MAPE, and Theil-U, among others. After the creation of AIC, AICc, HQ, BIC, and BICc, the two criteria that have become the most popular and commonly utilised are Bayesian IC and Akaike's IC. In this investigation, we are innovative in our use of exponential weighting to get the log-likelihood of the information criteria for model selection, which means that we propose assigning greater weight to more recent data in order to reflect their increased precision. All research data is from the major stock markets' daily observations, which include the USA (GSPC, DJI), Europe (FTSE 100, AEX, and FCHI), and Asia (Nikkei).

This research was carried out with an objective of studying the existing mushroom value chain, identifying demand-supply gap, carrying out SWOT analysis to explore challenges, proposing action plan and presenting finally standard operating procedure for enhancing value chain effectiveness. Data was collected from 71 actors identified in the oyster mushroom value chain in Tumakuru Taluk, Karnataka State, India and analysed. Analysis showed that there were five different models of value chain, and the shortest value chain was the most profitable one. Based on the respondents' perceptions, mushroom cultivation offers many opportunities such as creating employment, improving economic condition and diet. Meanwhile they face challenges like, pest attack, hike in input materials' prices, lack of technical guidance during farming, finance support, inefficient marketing system. There is a need to address demand-supply gap, invest more in facilities and related research, integrate all the actors in value chain to enhance productivity.

The study aims to review the literature on mobile wallet payment and align research trends using a systematic literature review with bibliometric and network visualisation analysis over two decades. It uses bibliometric analysis of the literature research retrieved from the Web of Science database. The study period was from 2001 to 2021, with 1,134 research papers. It also provides the indicators like citation trends, cited reference patterns, authorship patterns, subject areas published on the mobile wallet, top contributing authors, and highly cited research articles using the database. Furthermore, network visualisation analysis, like the co-occurrence of author keywords and keywords plus terms, has also been examined using VOSviewer software. The bibliometric analysis shows that the Republic of China dominates mobile wallet payment, and India is a significant contributor. Furthermore, the constructions of the network map using a co-citation analysis and bibliographic coupling shows an interesting pattern of mobile wallet payment.

A hybrid network system for mitigating errors due to jamming attacks in cognitive radio networks (CRNs) is named LeNet deep stacked autoencoder (LDSAE) and is developed. In this exploration, the sensing stage and decision-making are considered. The sensing unit is composed of four steps. First, the detected signal is forwarded to filtering progression. Here, BPF is utilised to filter the detected signal. The filtered signal is squared in the second phase. Third, signal samples are combined and jamming attacks occur by including false energy levels. Last, the attack is maliciously affecting the FC decision in the fourth step. On the other hand, FC initiated the decision-making and also recognised jamming attacks that affect the link amidst PU and SN in decision-making stage and it is accomplished by employing LDSAE-based trust model where the proposed module differentiates the malicious and selfish users. The analytic measures of LDSAE gained 79.40%, 79.90%, and 78.40%.