The retailer has struggled for years to comply with OSHA safety regulations

The central theme of Safe + Sound Week is to promote the implementation and enhancement of safety and health programs in workplaces. 

Sportswear manufacturer failed to correct its fall hazard violations from 2021 OSHA inspection. 

The company is accused of failing to protect workers from dangerous silica dust, leading to serious health issues.

OSHA encourages public participation in the rulemaking process.

Fall protection remains in the No. 1 spot. Incident data shows potential connection to top workplace compliance issues.

Cold stress may not be as well-known as heat stress, but when the temperature drops, it can pose a significant danger.

In 2018 alone, there were 103,600 recorded incidents in commercial buildings. Electrical malfunctions are a leading cause of these events, and they cost businesses $373,400,000 in 2018.

Metal stamping manufacturing processes can quickly and cleanly create solid metal parts for a wide range of needs and industries. Small metal parts make up some of the most important pieces when creating larger scale items.

On dangerous or risky job sites, and within certain environments, personal protective equipment (PPE) must be worn at all times. It makes perfect sense, because the gear is designed specifically to mitigate severe or fatal accidents. Helmets, for example, protect the head from falling objects, overhead fixtures, and much more.

Companies in the market for personal protection equipment (PPE) should look for products that are UL classified where this is applicable. These items have been subject to specific relevant tests and passed inspections for either personal or industry use.

True to its reputation of providing unparalleled protective welding gear for over 90 years, the John Tillman Company announced its new MIG (Metal Inert Gas) welding glove.

With the summer months right around the corner and temperatures warming up around the US, workers in a variety of industries are making adjustments to their personal protective apparel kit.

Bulwark, the world’s largest flame-resistant (FR) apparel brand, was recently sold to Redwood Capital Investments, LLC, marking a new era for the company as it transitions into a stand-alone workwear organization.

Electrical-related fatalities and serious injuries (FSI)* are among the noted FSIs. FSIs represent a safety and health challenge that has gained increasing visibility in the past decade as even organizations with elite environment, health and safety programs struggle to reduce FSI numbers.

California has had its fair share of fires over the years, especially the wild variety. This year’s wildfires have already burned more than 1 million acres, and nearly a dozen are still ablaze.  Now, the Golden State is facing an uptick in warehouse fires in some of its biggest and most populated cities, including Oakland, Carson and El Sereno.

Flame resistant clothing is an essential piece of safety gear, but these items get dirty just like any other piece of clothing. Washing and sanitizing FR clothing isn’t the same as doing a load of laundry at home.

Whether it is appropriate to attach non-FR embroidery and emblems to flame resistant protective garments is always a difficult question to address.

In 1998, according to a Bureau of Labor Statistics report, 413 workers were struck and killed by vehicles. That was “the highest number in the 7-year period that the fatality census has been compiled.”₁ Without a standard in place, the numbers were steadily rising.

Welding is an essential part of numerous manufacturing and assembly processes, employing more than 400,000 people in the United States alone. Because of the nature of the job — working with high temperatures and molten metals — injuries are likely.

Electrical safety risks are prevalent in any industry that has workers who are exposed to over 50 volts of electricity when performing a work task.

National PPE manufacturer and distributor Magid has partnered with flame-resistant (FR) PPE and apparel company CarbonX to co-brand a line of FR garments that they’re calling Magid® FR by CarbonX®.

 
Two new glove options offer exceptional category 4 arc flash protection and pass rigorous safety testing for workers in high-risk industries.

Flame-resistant cooling gaiter and towel.

Most professionals already understand the need for eye protection and burn prevention, but gas hazards deserve attention, too. Welding fume safety is an essential, if less evident, part of workshop safety.

The Tyvek 400 SFR coverall offers protection against flash fires and particulate contaminants.

Agency says manufacturer could have prevented an electrician from suffering severe burns during an electrical arc blast if required safety standards were followed.

The American Society of Safety Engineers (ASSE) says it is “encouraged” after seeing newly released data that shows a continued decrease in occupational injuries and illnesses, but thinks even more can be done to protect workers. The U.S. Bureau of Labor Statistics reported Nov. 9 that workplace injuries and illnesses at private industry employers were down by 48,500 cases in 2016 compared to the previous year.

The American Society of Safety Engineers (ASSE) is seeking a new Executive Director (ED), a position based in Park Ridge, Illinois and one that reports to the organization’s President and its Board of Directors. Founded in 1911, ASSE has a global membership of more than 36,000 safety, health and environmental practitioners worldwide. ASSE advocates on behalf of its members while also providing robust professional development, training and networking opportunities. ASSE has an annual budget of approximately $18M, staff of 75, and operates a robust network of 152 chapters in the United States and internationally.

American Society of Safety Engineers (ASSE) Executive Director Dennis Hudson has been honored with the President’s Distinguished Service Award by the U.K.-based Institution of Occupational Safety and Health (IOSH). The presentation occurred in November at the IOSH annual conference in Birmingham, England. The award honors the work and achievements of individuals who have made significant contributions to IOSH or the occupational safety and health profession for several years.

A highly anticipated global standard aimed at creating safer workplaces everywhere will be published on March 12, according to the Switzerland-based International Organization for Standardization (ISO) that spearheaded the five-year development process with support from the American Society of Safety Engineers (ASSE). Companies can purchase a hard copy of ISO 45001 Occupational Health and Safety Management Systems from ASSE beginning the week of the standard’s publication.

Tim Page-Bottorff, a highly respected safety trainer, mentor and motivational speaker who is often called a “public utilities safety guru,” is the American Society of Safety Engineers’ (ASSE) 2018 Edgar Monsanto Queeny Safety Professional of the Year. He has taken a variety of innovative steps to advance the safety and health profession while being influential with safety training for school-age children, encouraging them to consider safety as a fun and meaningful career.

Galvan brings 31 years of earned expertise to DFP, primarily in California, with eight years as an SIT surveyor.

The newest addition to Vector Solutions' LMS offers seamless learning experiences for faster, more efficient skill development as well as increased knowledge retention and engagement.

ISEA's $5,00 scholarship is awarded annually to a student in an accredited college or university, pursuing a degree in occupational safety, industrial hygiene or a related field. Deadline is Nov. 1.

Get an accurate, real-world picture of your employees’ hearing protection.

These new services join a comprehensive suite of consulting services offered by J. J. Keller, a leader in safety and regulatory compliance for 70 years. 

A free standing enclosed environment.

SoterGenius uses image and video analysis, chat functionality and document analysis to automate compliance checks against OSHA guidelines.

Attendees are invited to visit booth 101 to for hands-on experience with Nilfisk's industrial vacuums.

Nitrile exam grade powder-free disposable gloves wit textured fingertips for enhanced gripping power.

A soft construction goggle for a comfortable fit. 

New helmet has exclusive new features.

One of the key features of THORZT™ Freeze Shots is its innovative snap-and-twist packaging, which provides unparalleled convenience. 

The industrial gas detection series is modularly designed for easy integration and custom configurability.

These three new products not only enhance safety on the jobsite but also set a new benchmark for comfort, customization and versatility.

Contractor Management is a standalone solution that works within KPA’s Flex software suite for an all-in-one solution to manage compliance and workplace EHS.

DuPont has launched the DuPont™ Tyvek® 500 HP Model TY178 coverall.

Highly accurate and easy to use, the Gilian Go-Cal Pro from Sensidyne allows OEHS professionals to confidently set & verify accurate flow rates to ensure their sampling pump systems are operating as intended.

According to the National Student Clearinghouse, enrollment in construction trade courses have increased by 19.3% from 2021-2022.