Silver Spring, MD — A total of 532 construction workers were killed at road construction sites from 2011 through 2016 – more than twice the combined total for all other industries combined – according to a recent report from the Center for Construction Research and Training, also known as CPWR.

Columbia, MO — Distracted drivers are 29 times more likely to be involved in a highway work zone collision or near collision, according to a recent study from the University of Missouri.

Washington — National Work Zone Awareness Week is set for April 26-30, with a national kickoff event – hosted by the Michigan Department of Transportation – planned for 11 a.m. Eastern on April 27.

Little Rock, AR — The Arkansas Department of Transportation, in partnership with the Arkansas State Police, Arkansas Highway Police and other state organizations, has launched a campaign aimed at reducing incidents and fatalities in work zones.

Lincoln, NE — In an effort to help keep road construction workers and drivers safe, researchers at the University of Nebraska have developed prototype hardware that spans gaps between protective roadway barriers.

Columbia, MO — Using a self-driving truck to follow a manned vehicle during “moving work zone” operations could help prevent roadway worker injuries, results of a recent study show.

Washington — Vehicle-mounted electronic signs indicating that tow truck drivers and first responders are roadside may have significant outcomes for worker safety.

Olympia, WA — A new law in Washington state allows the use of speed safety cameras in highway work zones in an effort to protect roadway workers.

Washington — Use of temporary, portable rumble strips is more effective than warning signs at reducing distracted driving in work zones, according to a recent National Academy of Sciences, Engineering and Medicine report.

Watertown, SD — A new video from NATE: The Communications Infrastructure Contractors Association explores traffic control concepts intended to protect workers in roadway work zones.

Columbia, MO — Amid one of the most ambitious road construction efforts in state history, the University of Missouri has established a center aimed at preventing fatalities and serious injuries in work zones.

When selecting an extension cord for use with a power tool or high-powered machine, cord length is not the only thing that should be considered. Improper use of extension cords can easily cause appliances to overheat and can lead to fire.

The use of farm irrigation systems brings with it an increased risk of electrocution. Safe Electricity, a public awareness campaign created by the Urbana, IL-based Energy Education Council, urges workers to know and follow proper safety precautions to avoid electrical injuries when operating and handling watering systems.

Although it is a commonplace activity on many worksites, charging a lead-acid battery can be an extremely hazardous task. NIOSH identifies a number of associated hazards: the hydrogen gas formed while the battery is charging, the poisonous and corrosive sulfuric acid present in the battery fluid, the possibility of short circuits causing burns or explosions, and the risk of electric shock.

Jump-starting, testing or inspecting a vehicle battery without taking proper safety precautions could lead to a serious eye injury, warns Chicago-based Prevent Blindness America.

Between 1992 and 2005 at least 154 workers were killed by electrocution when a metal ladder came into contact with overhead power wires, according to the most recent data available from the Bureau of Labor Statistics.

Inattention to electrical hazards can lead to burns, shocks and electrocution. It is important to always be mindful of any potential electrical risks, both on and off the job.

Improperly using electrical equipment can create very serious hazards for workers. Special safety features built into equipment often are rendered ineffective when equipment is manipulated or misused.

Electrical hazards cause more than 300 electrocutions and 4,000 injuries in the workplace each year, according to the Rosslyn, VA-based Electrical Safety Foundation International. Many of these incidents could have been avoided with increased awareness about electricity, according to the organization.

Although injuries from electrical hazards represent a fraction of total on-the-job injuries, they are more likely to result in death than injuries from other causes, according to the Arlington, VA-based Electrical Safety Foundation International.

Electricity can present many dangers for workers, including arc flash hazards. An arc flash occurs when high-amperage currents travel, or “arc,” through the air.

Electrical extension cords are used in many office buildings and worksites, and should be treated with caution. The Texas Department of Insurance Division of Workers’ Compensation reminds workers that correct use of extension cords is an important component of on-the-job electrical safety.

Understanding electrical safety on the job is critical. But can you separate electrical safety myths from facts?

Exposure to electricity resulted in 156 deaths and 1,730 cases involving days away from work in the United States in 2012, according to the 2015 edition of the National Safety Council’s “Injury Facts.”

When thinking about where electrical hazards are commonly found, your first thought likely isn’t your office. However, the Georgia Institute of Technology states that electrical equipment used in offices can be hazardous and result in serious injuries if not properly maintained.

OSHA recommends workers follow eight “rules to live by” regarding downed electrical lines.

A 62-year-old mechanic died after being crushed when the 994-pound electrical cabinet he was working on tipped over.

Exposure to electricity resulted in 141 workplace fatalities and 2,090 cases with days away from work in 2013, according to the 2016 edition of “Injury Facts,” a chartbook from the National Safety Council. How can workers stay safe?

If extension cords are used at your workplace or jobsite, workers should be aware of a number of safety “do’s” and “don’ts” before plugging in a cord, according to the Texas Department of Insurance, Division of Workers’ Compensation.

Workers using aerial lifts can be injured or killed if they don’t know how to operate them safely.

Heads up, workers: Power lines can be serious and potentially fatal hazards when proper safety precautions are not followed.

On-the-job electrical hazards are more common than people may realize.

Portable generators can be found in many workplaces. Among the risks users face, according to OSHA, are shocks and electrocution from improper use of power or unintentionally energizing other electrical systems, and fires from improperly refueling the generator or not storing fuel correctly.

Struggling to figure out how to remove or minimize human error in the workplace? The simple answer is to adopt a three-step technological approach of “monitor, inspect and manage” to create an ecosystem of safety-focused operations that remove the human element’s risk.

Electrical incidents happen daily, putting lives and operational continuity at risk. However, there are ways companies can reduce the occurrence of these incidents and protect everyone concerned from the physical, financial, and statutory consequences.

The life cycle of electrical assets typically spans 25-30 years under ideal conditions. However, many companies don’t maintain their electrical assets, which may result in reduced asset life.

In Episode 45, the S+H team examines the November issue’s feature story on common electrical safety errors. Also, T.J. Lentz, a lead health scientist at NIOSH, joins the podcast to discuss workplace chemical safety in the “Five Questions With …” segment.

Oakland, CA – The California Division of Occupational Safety and Health’s heat illness prevention Special Emphasis Program led to 3,575 inspections in 2014 – about one-third of which resulted in heat-related citations – the agency has announced.

Oakland, CA – With warm weather approaching, California’s Division of Occupational Safety and Health is urging employers of outdoor workers to begin preparing for hot temperatures.

Sacramento, CA – The California Department of Industrial Relations has issued a new guidance document to help familiarize employers on the state’s updated heat illness prevention rules, which are set to go into effect May 1.

Washington – As hot weather approaches, OSHA is placing potentially lifesaving information at outdoor workers’ fingertips.

Iowa City, IA – A new campaign is reminding farmers about the dangers of skin cancer and heat stress, and how to stay protected.

Washington – A new YouTube video from OSHA aims to inform workers of all ages about the importance of taking precautions against heat illness.

Silver Spring, MD – An online resource offers guidance for employers and employees on preventing heat illnesses in the workplace.

Fort Lauderdale, FL – More than 9 out of 10 heat-related injuries among military service members stem from non-combat operations, according to researchers from the Department of Defense Biotechnology High Performance Computing Software Applications Institute.

Working outside in the sun can cause serious skin problems, including burns and skin cancer.

If you’ve ever come in contact with poison ivy, you know how unpleasant it can be. And for many outdoor workers, poisonous plants are a common hazard.

Silver Spring, MD – With summer only days away, the Center for Construction Research and Training – also known as CPWR – has issued a hazard alert about heat risks and precautions workers can take to avoid heat-related illnesses.

Washington – NIOSH and OSHA recently teamed up to update a heat safety mobile app that uses temperature and humidity to measure heat index values.

Does your workplace really need to be prepared for the possibility of a tornado? The answer is “Yes.” Tornadoes can occur anywhere and at any time, OSHA states, adding that an average of 800 tornadoes are reported across the nation every year. So, what can employers do to help keep employees safe in the event of a tornado?