Working with pallets can present hazards for both workers and equipment. Workers can suffer cuts and abrasions from pallets in disrepair, and unstable pallets can break, dropping freight and causing potential damage to equipment and injury to workers.

Damaged loading dock floors can be a workplace hazard, according to the National Safety Council.

When using chains and chain slings on the job, you need to keep a few important things in mind.

A quick online search will uncover a large number of fatal workplace incident reports involving forklifts. From workers being crushed by these vehicles to others being run over or backed over, incidents involving forklifts can cause injuries and deaths in many ways.

You can’t smell it, taste it or see it, but it can be deadly. Carbon monoxide – sometimes referred to as the “silent killer” – prevents oxygen from going into the body and can result in death in a short period of time, the Michigan Department of Community Health states. But how does carbon monoxide form, and when are workers at risk?

Everyone remembers the school class clown – the person always getting into trouble, pulling pranks and being goofy. Harmless stuff, right? Maybe back then. If your workplace has a class clown who engages in horseplay, it’s no laughing matter.

Think emergency drills are only for schoolchildren? Think again. The National Safety Council urges all workers to take drills seriously.

How can management demonstrate its commitment to a safe and healthy workplace? Try a safety walkaround.

Hazards are all around us. Although some are easy to see, many are not. The trick is learning to spot the hidden hazards.

Looking for some quick recommendations for setting up a workplace safety and health program? OSHA has 10 steps.

Use of compact fluorescent lightbulbs can save money, conserve energy, reduce waste and lower greenhouse gas emissions, according to the Environmental Protection Agency. However, CFLs contain mercury – a potent neurotoxin that, in small amounts, can cause serious health problems. At room temperature, mercury is a liquid and can readily evaporate into the air.

Nearly half of all work-related injuries involving mechanical power presses result in amputation, statistics compiled by OSHA show. Around 60% of amputations involve a worker’s fingers or arm getting caught or compressed by a press or other machinery such as a conveyer, according to data from the Bureau of Labor Statistics.

Safety walkarounds demonstrate an employer’s commitment to safety and allow managers to see for themselves how effective their safety and health management program is, OSHA says in a fact sheet from its Safe + Sound campaign.

Although ever-present and used on a daily basis, electrical equipment requires constant awareness of its associated hazards, as well as training on appropriate use, storage and maintenance, the Indiana Department of Labor reminds employers and workers.

Every day, about 2,000 U.S. workers injure their eyes severely enough to need medical treatment, according to NIOSH. With May being Healthy Vision Month, let’s take a look at how workers can protect their eyes.

Not all risks hold equal weight. For example, focusing efforts on reducing the frequency of safety-related incidents doesn’t necessarily lead to a reduction in the severity of incidents.

The “blue line” is defined as the path workers take to get their work done. The National Safety Council adds: “Blue line reviews are field observations of work by leaders with the goal of better understanding how work is actually performed.”

Identifying and correcting hazards in the workplace helps ensure workers safely return home to their families. OSHA, via its Safe + Sound campaign, says employers can do many things to encourage workers to find and fix hazards.

Contact with electricity is one of the leading causes of fatalities in construction, according to OSHA.

Extension cords can be found in many types of workplaces, from offices and warehouses to retail stores and construction jobsites. Unfortunately, they’re often misused.

Severed fingers and toes are injuries commonly associated with using truck liftgates. So are crushed feet.

Serious injuries and even death can occur if overhead cranes aren’t inspected and properly used.

Are your workplace fire extinguishers in the right place? According to the National Fire Protection Association, employers need to consider two key factors: accessibility and visibility.

Workers at height. Stacked materials. Pedestrian, forklift and truck traffic. All in one place. “Loading docks are very dangerous areas for employees,” OSHA’s Reginald Jackson says.

Once you train yourself to spot hazards, you’ll notice them all around you. They may not always be obvious or immediate concerns, but they can still pose a risk to you and your co-workers.

Portable dockboards are used to help prevent falls over gaps in the surface when forklifts, pallet jacks, carts and other equipment are moving between a trailer and the warehouse dock area.

NSC has suggestions for staying engaged at work.

Sacramento, CA — California’s Occupational Safety and Health Standards Board has unanimously approved a standard on heat exposure in indoor workplaces.

Eleven miners were injured as a result of an arc flash over a recent six-month period, according to a safety alert from the Mine Safety and Health Administration.

Are you getting ready to operate an aerial lift? OSHA recommends a pre-start inspection of the vehicle and lift components.

The A+A 2015 International Trade Fair with Congress for Safety, Security and Health at Work will be held from Oct. 27 to 30, 2015, in Düsseldorf, Germany. More than 1,600 exhibitors from 55 countries will showcase their entire range of products and services for personal and occupational safety to more than 60,000 visitors.

Click here for more information from A+A Messe Dusseldorf

Heartsaver First Aid CPR AED Online is a self-directed course that uses interactive lessons and videos to teach comprehensive first aid, CPR and AED knowledge. This program is for anyone with limited or no medical training who needs an AHA course completion card.

Click here for more information from American Heart Association

The “Career Paths in Safety” brochure shows BCSP’s certification options at basic, technologist and technician, trainer, and professional levels. It outlines safety education, experience and job roles. “Career Paths in Safety” includes information on BCSP’s certifications, including the CSP, ASP, OHST, CHST, STS, STSC and CET.

Click here for more information from the Board of Certified Safety Professionals

Don’t chance workplace safety – take lockout/tagout beyond compliance with a comprehensive program your employees can rely on. The Expanded Guide to Lockout Tagout provides tips on compliance, evaluating your current program and achieving world-class standards. Download the guide.

Click here for more information from Brady Worldwide, Inc.

With more than 20 years of providing occupational safety and health education, Columbia Southern University is an online leader in producing highly qualified OSH graduates. Our online associate, bachelor’s and master’s degrees in OSH offer training in environmental science, air quality, ergonomics and more. Contact CSU to get started today!

Click here for more information from Columbia Southern University

GuardianCoil^® Coiled Wire Fabric Machine Guards are widely used in the manufacturing and fabrication industries to guard operators from ejected parts and debris during machine use. Available in numerous sizes, our kits fit most hydraulic presses and equipment – plus, we can design and manufacture custom machine guards for special applications.

Click here for more information from Cascade Coil Drapery, Inc.

DRIFIRE 4.4™ Ultra-Lightweight Dual-Hazard Garments combine UL 2112 protection and a 10 calorie, HRC2 Arc Rating. Plus, protection meets performance with permanent moisture-wicking technology so garments dry up to 3x faster than competitors. It’s so light, you have to feel it to believe it. Learn more now!

Click here for more information from DRIFIRE

Encon^® Safety Products is the recognized leader in emergency shower and eyewash products. Our products are built to your specifications with a wide choice of available options and materials for unmatched performance and durability. We use premium quality components and heavier-gauge steel so you can count on Encon when seconds matter.

Click here for more information from Encon Safety Products, Inc.

SkyGuard: Bolt-together, non-penetrating protection for smoke hatches and venting skylights. Free-standing design maintains waterproof integrity. Galvanized bases for resistance to the elements. Rail height 42 inches. Meets OSHA 1910.23(a)(4) and 1926.501 (b)(4). Standard and custom sizes. Rubber foot pads prevent sliding or damage to membranes.

Click here for more information from Garlock Safety Systems

The Goggle Guard Clip works with both full-brim and cap-style hard hats to keep safety goggles securely held. The integrated pencil clip fits No. 2 pencils, carpenter pencils or small to medium-sized pens. Customize your clip with a project ID, contact information, logo or safety slogan imprint.

Click here for more information from Glove Guard, LP

Think Safety. Think Grainger^®. Grainger has the products, services and resources to help keep your people and facility safe. Visit www.grainger.com/safety1 to request a free copy of our safety catalog. From PPE and first aid to lockout/tagout, it’s packed with the products you need to safeguard your crew.

Click here for more information from Grainger

OLIVER^® Safety Footwear is uniquely suited for workers in the most extreme working conditions, including mining, oil and gas; heavy metal fabrication; and construction. The footwear provides superior protection from harsh chemicals, temperatures, slippery conditions, and unexpected contact with abrasive surfaces or heavy machinery while maximizing safety, performance and comfort, and reducing foot and leg fatigue.

Click here for more information from Honeywell Safety Products

FootRests High-Energy Footwear has a multi-layer cushioning system that places the cushion layers next to the foot for better comfort. This is achieved by bringing the midsole cushion layer from outside to inside the boot. This midsole/insole cushion system provides better ergonomics. The insole conforms to the person’s foot through wear, providing better support and reduced foot fatigue.

Click here for more information from HYTEST Safety Footwear

Reinforce your safety training. The J. J. Keller^® EyeCue^® Visual Learning System uses a simple – yet effective – three-step process:

1. Train – Deliver training enhanced with eye-catching EyeCue^® icons
2. Identify – Place the corresponding EyeCue^® tags in your workplace
3. Reinforce – Encourage employees to connect the tags to the training

Visit JJKeller.com/EyeCue for details.

Click here for more information from J. J. Keller & Associates, Inc.

The next generation of personal portable lifts – JLG^® LiftPod^® FT Series – is designed to increase job efficiency throughout your facility. Easily rolled through standard doorways and designed for one-person operation, it enables employees to reach their work and have 360-degree range of motion. Visit www.jlg.com/en/facilities-12 to learn more.

Click here for more information from JLG Industries, Inc.

The Men’s Hybred^® Waterproof Composition Toe Workboot, a new style from Justin Original Workboots, features the latest technology for superior comfort and safety. The composition toe exceeds ASTM F2413-11, 175, C75 safety standards and has the J-Flex Flexible Comfort System^® so the boots are as comfortable as they are tough.

Click here for more information from Justin Original Workboots

Master Lock’s Confined Space Covers prevent unauthorized entries and guard against weather and debris. Clear OSHA-compliant signage and secure barrier locks protect against the hazards of unsupervised confined spaces. Learn more.

Click here for more information from Master Lock

The Mount Vernon FR line of AMTEXT TC Flame-Resistant Fabrics combines comfort, strength and a high level of protection so workers don’t have to make any tradeoffs. The fabrics feel lighter than they actually are, increasing comfort for workers, especially in hot weather and high temperature environments.

Click here for more information from Mount Vernon FR

The National Association of Tower Erectors is dedicated to providing a unified voice for tower erection, service and maintenance companies. NATE is recognized as the tower industry leader in promoting safety, education, uniform practices and procedures. Visit www.natehome.com or call (605) 882-5865 for more information.

Click here for more information from National Association of Tower Erectors (NATE)

Innovation, quality, styling and expert construction define the Portwest Safety Footwear Collection. Designed for use across a range of industries, including offshore, construction, warehousing and agriculture. All footwear outsoles are ergonomically designed and manufactured using cemented, direct-injected and Goodyear-welted techniques. All products are ASTM F2413-11 and EN ISO 20345:2011 certified.

Click here for more information from Portwest, LLC