The surprise firings at Alberta Investment Management raises many questions. We will try to answer them

Dispute risks damage to Canada's reputation as reliable trade partner, says Steven Mackinnon

Several people were rescued on Saturday after a wave damaged their vessel off the coast of Florida, sending some of the boaters into the water.

John Ratcliffe, who previously served as President-elect Trump's principal intelligence advisor, has now been picked by Trump to serve as director of the CIA.

Myah Saakwa-Mante, a 20-year-old British university student, was caught at Los Angeles International Airport and arrested after allegedly attempting to smuggle T-shirts soaked with methamphetamine.

Dallas Mavericks minority owner Mark Cuban returned to the Bluesky social media platform with a post after weeks of contentious X posts.

A man from Eugene, Oregon, pleaded guilty to federal hate crimes on Tuesday after he spray-painted antisemitic graffiti on a synagogue in 2023 and 2024.

Just like Eli Manning in 2004, Deion Sanders said he would tell NFL teams his son, Shedeur Sanders, won't play for them if it's not the right fit.

Jessica Simpson sparked rumors this week with a cryptic post about making new music and having put up with "everything I did not deserve."

Georgia's loss to Ole Miss Saturday brought a wild shakeup to the college football rankings, and the Bulldogs find themselves out of the playoff picture.

The Associated Press has declared a winner in Colorado's 8th Congressional District which has been one of the most closely watched races in the country.

Senate Republicans met on Tuesday night to hear from the three candidates to succeed Mitch McConnell, and Rick Scott left with two new endorsements.

Incumbent Republican David Valadao is projected to emerge victorious in California's 22nd Congressional District. The highly contested race was considered to be a tossup.

Senator-elect Jim Justice's office has clarified reports that his famous pooch Babydog was banned from the Senate floor, saying Justice never intended to bring the dog onto the floor.

House Republicans are once again at odds with one another after conservatives threatened to protest Speaker Johnson's bid to lead the conference again.

'Gutfeld!' panelists react to President-elect Trump's choice for 'border czar.'

In the first quarter of Monday's Dolphins-Rams game, ESPN reported that Tyreek Hill said a torn ligament in his wrist became worst after he was detained by police.

Media outlets fear being dragged in to coronial inquests and forced to defend themselves whenever they report deaths.

Apple is making Siri smarter as part of updates that also promise improvements to Maps, Music and Photos.

Prepare yourself for the challenges of creating cutting-edge A&D autonomous tech. Download the e-book to explore how autonomy is transforming the aerospace & defense industry.

Download this free whitepaper now!

“Cover, bring to a boil, then reduce heat. Simmer for 20 minutes.” These directions seem simple enough, and yet I have messed up many, many pots of rice over the years. My sympathies to anyone who’s ever had to boil rice on a stovetop, cook it in a clay pot over a kerosene or charcoal burner, or prepare it in a cast-iron cauldron. All hail the 1955 invention of the automatic rice cooker!

How the automatic rice cooker was invented

It isn’t often that housewives get credit in the annals of invention, but in the story of the automatic rice cooker, a woman takes center stage. That happened only after the first attempts at electrifying rice cooking, starting in the 1920s, turned out to be utter failures. Matsushita, Mitsubishi, and Sony all experimented with variations of placing electric heating coils inside wooden tubs or aluminum pots, but none of these cookers automatically switched off when the rice was done. The human cook—almost always a wife or daughter—still had to pay attention to avoid burning the rice. These electric rice cookers didn’t save any real time or effort, and they sold poorly.

But Shogo Yamada, the energetic development manager of the electric appliance division for Toshiba, became convinced that his company could do better. In post–World War II Japan, he was demonstrating and selling electric washing machines all over the country. When he took a break from his sales pitch and actually talked to women about their daily household labors, he discovered that cooking rice—not laundry—was their most challenging chore. Rice was a mainstay of the Japanese diet, and women had to prepare it up to three times a day. It took hours of work, starting with getting up by 5:00 am to fan the flames of a kamado, a traditional earthenware stove fueled by charcoal or wood on which the rice pot was heated. The inability to properly mind the flame could earn a woman the label of “failed housewife.”

In 1951, Yamada became the cheerleader of the rice cooker within Toshiba, which was understandably skittish given the past failures of other companies. To develop the product, he turned to Yoshitada Minami, the manager of a small family factory that produced electric water heaters for Toshiba. The water-heater business wasn’t great, and the factory was on the brink of bankruptcy.

How Sources Influence the Telling of History

As someone who does a lot of research online, I often come across websites that tell very interesting histories, but without any citations. It takes only a little bit of digging before I find entire passages copied and pasted from one site to another, and so I spend a tremendous amount of time trying to track down the original source. Accounts of popular consumer products, such as the rice cooker, are particularly prone to this problem. That’s not to say that popular accounts are necessarily wrong; plus they are often much more engaging than boring academic pieces. This is just me offering a note of caution because every story offers a different perspective depending on its sources.

For example, many popular blogs sing the praises of Fumiko Minami and her tireless contributions to the development of the rice maker. But in my research, I found no mention of Minami before Helen Macnaughtan’s 2012 book chapter, “Building up Steam as Consumers: Women, Rice Cookers and the Consumption of Everyday Household Goods in Japan,” which itself was based on episode 42 of the Project X: Challengers documentary series that was produced by NHK and aired in 2002.

If instead I had relied solely on the description of the rice cooker’s early development provided by the Toshiba Science Museum (here’s an archived page from 2007), this month’s column would have offered a detailed technical description of how uncooked rice has a crystalline structure, but as it cooks, it becomes a gelatinized starch. The museum’s website notes that few engineers had ever considered the nature of cooking rice before the rice-cooker project, and it refers simply to the “project team” that discovered the process. There’s no mention of Fumiko.

Both stories are factually correct, but they emphasize different details. Sometimes it’s worth asking who is part of the “project team” because the answer might surprise you. —A.M.

Although Minami understood the basic technical principles for an electric rice cooker, he didn’t know or appreciate the finer details of preparing perfect rice. And so Minami turned to his wife, Fumiko.

Fumiko, the mother of six children, spent five years researching and testing to document the ideal recipe. She continued to make rice three times a day, carefully measuring water-to-rice ratios, noting temperatures and timings, and prototyping rice-cooker designs. Conventional wisdom was that the heat source needed to be adjusted continuously to guarantee fluffy rice, but Fumiko found that heating the water and rice to a boil and then cooking for exactly 20 minutes produced consistently good results.

But how would an automatic rice cooker know when the 20 minutes was up? A suggestion came from Toshiba engineers. A working model based on a double boiler (a pot within a pot for indirect heating) used evaporation to mark time. While the rice cooked in the inset pot, a bimetallic switch measured the temperature in the external pot. Boiling water would hold at a constant 100 °C, but once it had evaporated, the temperature would soar. When the internal temperature of the double boiler surpassed 100 °C, the switch would bend and cut the circuit. One cup of boiling water in the external pot took 20 minutes to evaporate. The same basic principle is still used in modern cookers.

Yamada wanted to ensure that the rice cooker worked in all climates, so Fumiko tested various prototypes in extreme conditions: on her rooftop in cold winters and scorching summers and near steamy bathrooms to mimic high humidity. When Fumiko became ill from testing outside, her children pitched in to help. None of the aluminum and glass prototypes, it turned out, could maintain their internal temperature in cold weather. The final design drew inspiration from the Hokkaidō region, Japan’s northernmost prefecture. Yamada had seen insulated cooking pots there, so the Minami family tried covering the rice cooker with a triple-layered iron exterior. It worked.

How Toshiba sold its automatic rice cooker

Toshiba’s automatic rice cooker went on sale on 10 December 1955, but initially, sales were slow. It didn’t help that the rice cooker was priced at 3,200 yen, about a third of the average Japanese monthly salary. It took some salesmanship to convince women they needed the new appliance. This was Yamada’s time to shine. He demonstrated using the rice cooker to prepare takikomi gohan, a rice dish seasoned with dashi, soy sauce, and a selection of meats and vegetables. When the dish was cooked in a traditional kamado, the soy sauce often burned, making the rather simple dish difficult to master. Women who saw Yamada’s demo were impressed with the ease offered by the rice cooker.

Another clever sales technique was to get electricity companies to serve as Toshiba distributors. At the time, Japan was facing a national power surplus stemming from the widespread replacement of carbon-filament lightbulbs with more efficient tungsten ones. The energy savings were so remarkable that operations at half of the country’s power plants had to be curtailed. But with utilities distributing Toshiba rice cookers, increased demand for electricity was baked in.

Within a year, Toshiba was selling more than 200,000 rice cookers a month. Many of them came from the Minamis’ factory, which was rescued from near-bankruptcy in the process.

How the automatic rice cooker conquered the world

From there, the story becomes an international one with complex localization issues. Japanese sushi rice is not the same as Thai sticky rice which is not the same as Persian tahdig, Indian basmati, Italian risotto, or Spanish paella. You see where I’m going with this. Every culture that has a unique rice dish almost always uses its own regional rice with its own preparation preferences. And so countries wanted their own type of automatic electric rice cooker (although some rejected automation in favor of traditional cooking methods).

Yoshiko Nakano, a professor at the University of Hong Kong, wrote a book in 2009 about the localized/globalized nature of rice cookers. Where There Are Asians, There Are Rice Cookers traces the popularization of the rice cooker from Japan to China and then the world by way of Hong Kong. One of the key differences between the Japanese and Chinese rice cooker is that the latter has a glass lid, which Chinese cooks demanded so they could see when to add sausage. More innovation and diversification followed. Modern rice cookers have settings to give Iranians crispy rice at the bottom of the pot, one to let Thai customers cook noodles, one for perfect rice porridge, and one for steel-cut oats.

My friend Hyungsub Choi, in his 2022 article “Before Localization: The Story of the Electric Rice Cooker in South Korea,” pushes back a bit on Nakano’s argument that countries were insistent on tailoring cookers to their tastes. From 1965, when the first domestic rice cooker appeared in South Korea, to the early 1990s, Korean manufacturers engaged in “conscious copying,” Choi argues. That is, they didn’t bother with either innovation or adaptation. As a result, most Koreans had to put up with inferior domestic models. Even after the Korean government made it a national goal to build a better rice cooker, manufacturers failed to deliver one, perhaps because none of the engineers involved knew how to cook rice. It’s a good reminder that the history of technology is not always the story of innovation and progress.

Eventually, the Asian diaspora brought the rice cooker to all parts of the globe, including South Carolina, where I now live and which coincidentally has a long history of rice cultivation. I bought my first rice cooker on a whim, but not for its rice-cooking ability. I was intrigued by the yogurt-making function. Similar to rice, yogurt requires a constant temperature over a specific length of time. Although successful, my yogurt experiment was fleeting—store-bought was just too convenient. But the rice cooking blew my mind. Perfect rice. Every. Single. Time. I am never going back to overflowing pots of starchy water.

Part of a continuing series looking at historical artifacts that embrace the boundless potential of technology.

An abridged version of this article appears in the November 2024 print issue as “The Automatic Rice Cooker’s Unlikely Inventor.”

References

Helen Macnaughtan’s 2012 book chapter, “Building up Steam as Consumers: Women, Rice Cookers and the Consumption of Everyday Household Goods in Japan,” was a great resource in understanding the development of the Toshiba ER-4. The chapter appeared in The Historical Consumer: Consumption and Everyday Life in Japan, 1850-2000, edited by Penelope Francks and Janet Hunter (Palgrave Macmillan).

Yoshiko Nakano’s book Where There are Asians, There are Rice Cookers (Hong Kong University Press, 2009) takes the story much further with her focus on the National (Panasonic) rice cooker and its adaptation and adoption around the world.

The Toshiba Science Museum, in Kawasaki, Japan, where we sourced our main image of the original ER-4, closed to the public in June. I do not know what the future holds for its collections, but luckily some of its Web pages have been archived to continue to help researchers like me.

Imagine pulling up to a refueling station and filling your vehicle’s tank with liquid hydrogen, as safe and convenient to handle as gasoline or diesel, without the need for high-pressure tanks or cryogenic storage. This vision of a sustainable future could become a reality if a Calgary, Canada–based company, Ayrton Energy, can scale up its innovative method of hydrogen storage and distribution. Ayrton’s technology could make hydrogen a viable, one-to-one replacement for fossil fuels in existing infrastructure like pipelines, fuel tankers, rail cars, and trucks.

The company’s approach is to use liquid organic hydrogen carriers (LOHCs) to make it easier to transport and store hydrogen. The method chemically bonds hydrogen to carrier molecules, which absorb hydrogen molecules and make them more stable—kind of like hydrogenating cooking oil to produce margarine.

A researcher pours a sample of Ayrton’s LOHC fluid into a vial.Ayrton Energy

The approach would allow liquid hydrogen to be transported and stored in ambient conditions, rather than in the high-pressure, cryogenic tanks (to hold it at temperatures below -252 ºC) currently required for keeping hydrogen in liquid form. It would also be a big improvement on gaseous hydrogen, which is highly volatile and difficult to keep contained.

Founded in 2021, Ayrton is one of several companies across the globe developing LOHCs, including Japan’s Chiyoda and Mitsubishi, Germany’s Covalion, and China’s Hynertech. But toxicity, energy density, and input energy issues have limited LOHCs as contenders for making liquid hydrogen feasible. Ayrton says its formulation eliminates these trade-offs.

Safe, Efficient Hydrogen Fuel for Vehicles

Conventional LOHC technologies used by most of the aforementioned companies rely on substances such as toluene, which forms methylcyclohexane when hydrogenated. These carriers pose safety risks due to their flammability and volatility. Hydrogenious LOHC Technologies in Erlanger, Germany and other hydrogen fuel companies have shifted toward dibenzyltoluene, a more stable carrier that holds more hydrogen per unit volume than methylcyclohexane, though it requires higher temperatures (and thus more energy) to bind and release the hydrogen. Dibenzyltoluene hydrogenation occurs at between 3 and 10 megapascals (30 and 100 bar) and 200–300 ºC, compared with 10 MPa (100 bar), and just under 200 ºC for methylcyclohexane.

Ayrton’s proprietary oil-based hydrogen carrier not only captures and releases hydrogen with less input energy than is required for other LOHCs, but also stores more hydrogen than methylcyclohexane can—55 kilograms per cubic meter compared with methylcyclohexane’s 50 kg/m³. Dibenzyltoluene holds more hydrogen per unit volume (up to 65 kg/m³), but Ayrton’s approach to infusing the carrier with hydrogen atoms promises to cost less. Hydrogenation or dehydrogenation with Ayrton’s carrier fluid occurs at 0.1 megapascal (1 bar) and about 100 ºC, says founder and CEO Natasha Kostenuk. And as with the other LOHCs, after hydrogenation it can be transported and stored at ambient temperatures and pressures.

Judges described [Ayrton's approach] as a critical technology for the deployment of hydrogen at large scale.” —Katie Richardson, National Renewable Energy Lab

Ayrton’s LOHC fluid is as safe to handle as margarine, but it’s still a chemical, says Kostenuk. “I wouldn’t drink it. If you did, you wouldn’t feel very good. But it’s not lethal,” she says.

Kostenuk and fellow Ayrton cofounder Brandy Kinkead (who serves as the company’s chief technical officer) were originally trying to bring hydrogen generators to market to fill gaps in the electrical grid. “We were looking for fuel cells and hydrogen storage. Fuel cells were easy to find, but we couldn’t find a hydrogen storage method or medium that would be safe and easy to transport to fuel our vision of what we were trying to do with hydrogen generators,” Kostenuk says. During the search, they came across LOHC technology but weren’t satisfied with the trade-offs demanded by existing liquid hydrogen carriers. “We had the idea that we could do it better,” she says. The duo pivoted, adjusting their focus from hydrogen generators to hydrogen storage solutions.

“Everybody gets excited about hydrogen production and hydrogen end use, but they forget that you have to store and manage the hydrogen,” Kostenuk says. Incompatibility with current storage and distribution has been a barrier to adoption, she says. “We’re really excited about being able to reuse existing infrastructure that’s in place all over the world.” Ayrton’s hydrogenated liquid has fuel-cell-grade (99.999 percent) hydrogen purity, so there’s no advantage in using pure liquid hydrogen with its need for subzero temperatures, according to the company.

The main challenge the company faces is the set of issues that come along with any technology scaling up from pilot-stage production to commercial manufacturing, says Kostenuk. “A crucial part of that is aligning ourselves with the right manufacturing partners along the way,” she notes.

Asked about how Ayrton is dealing with some other challenges common to LOHCs, Kostenuk says Ayrton has managed to sidestep them. “We stayed away from materials that are expensive and hard to procure, which will help us avoid any supply chain issues,” she says. By performing the reactions at such low temperatures, Ayrton can get its carrier fluid to withstand 1,000 hydrogenation-dehydrogenation cycles before it no longer holds enough hydrogen to be useful. Conventional LOHCs are limited to a couple of hundred cycles before the high temperatures required for bonding and releasing the hydrogen breaks down the fluid and diminishes its storage capacity, Kostenuk says.

Breakthrough in Hydrogen Storage Technology

In acknowledgement of what Ayrton’s nontoxic, oil-based carrier fluid could mean for the energy and transportation sectors, the U.S. National Renewable Energy Lab (NREL) at its annual Industry Growth Forum in May named Ayrton an “outstanding early-stage venture.” A selection committee of more than 180 climate tech and cleantech investors and industry experts chose Ayrton from a pool of more than 200 initial applicants, says Katie Richardson, group manager of NREL’s Innovation and Entrepreneurship Center, which organized the forum. The committee based its decision on the company’s innovation, market positioning, business model, team, next steps for funding, technology, capital use, and quality of pitch presentation. “Judges described Ayrton’s approach as a critical technology for the deployment of hydrogen at large scale,” Richardson says.

As a next step toward enabling hydrogen to push gasoline and diesel aside, “we’re talking with hydrogen producers who are right now offering their customers cryogenic and compressed hydrogen,” says Kostenuk. “If they offered LOHC, it would enable them to deliver across longer distances, in larger volumes, in a multimodal way.” The company is also talking to some industrial site owners who could use the hydrogenated LOHC for buffer storage to hold onto some of the energy they’re getting from clean, intermittent sources like solar and wind. Another natural fit, she says, is energy service providers that are looking for a reliable method of seasonal storage beyond what batteries can offer. The goal is to eventually scale up enough to become the go-to alternative (or perhaps the standard) fuel for cars, trucks, trains, and ships.

As the philanthropic partner of IEEE, the IEEE Foundation expands the organization’s charitable body of work by inspiring philanthropic engagement that ignites a donor’s innermost interests and values.

One way the Foundation does so is by partnering with IEEE units to create memorial funds, which pay tribute to members, family, friends, teachers, professors, students, and others. This type of giving honors someone special while also supporting future generations of engineers and celebrating innovation.

Below are three recently created memorial funds that not only have made an impact on their beneficiaries and perpetuated the legacy of the namesake but also have a deep meaning for those who launched them.

EPICS in IEEE Fischer Mertel Community of Projects

The EPICS in IEEE Fischer Mertel Community of Projects was established to support projects “designed to inspire multidisciplinary teams of engineering students to collaborate and engineer solutions to address local community needs.”

The fund was created by the children of Joe Fischer and Herb Mertel to honor their fathers’ passion for mentoring students. Longtime IEEE members, Fischer and Mertel were active with the IEEE Electromagnetic Compatibility Society. Fischer was the society’s 1972 president and served on its board of directors for six years. Mertel served on the society’s board from 1979 to 1983 and again from 1989 to 1993.

“The EPICS in IEEE Fischer Mertel Community of Projects was established to inspire and support outstanding engineering ideas and efforts that help communities worldwide,” says Tina Mertel, Herb’s daughter. “Joe Fischer and my father had a lifelong friendship and excelled as engineering leaders and founders of their respective companies [Fischer Custom Communications and EMACO]. I think that my father would have been proud to know that their friendship and work are being honored in this way.”

The nine projects supported thus far have the potential to impact more than 104,000 people because of the work and collaboration of 190 students worldwide. The projects funded are intended to represent at least two of the EPICS in IEEE’s focus categories: education and outreach; human services; environmental; and access and abilities.

Here are a few of the projects:

• The Engineering Outreach at San Diego K–12 Schools project aims to bridge the city’s STEM education gap by sending IEEE members to schools to teach project-based lessons in mechanical, aerospace, electrical and computer engineering, as well as computer science. The project is led by the IEEE–Eta Kappa Nu honor society’s Kappa Psi chapter at the University of California San Diego and the San Diego Unified School District.
• Students from the Sahrdaya College of Engineering and Technology student branch in Kodakara, India, are developing an exoskeleton for nurses to support their lumbar spine region.
• Volunteers from the IEEE Uganda Section and local engineering students are designing and fabricating a stationary bicycle to act as a generator, providing power to families living in underserved communities. The goal of the project is to reduce air pollution caused by generators and supply reliable, affordable power to people in need.
• The IEEE Colombian Caribbean Section’s Increasing Inclusion of Visually Impaired People with a Mobile Application for English Learning project aims to ensure visually impaired students can learn to read, write, and speak English alongside their peers. The section’s members are developing a mobile app to help accomplish their goal.

IEEE AESS Michael C. Wicks Radar Student Travel Grant

The IEEE Michael C. Wicks Radar Student Travel Grant was established by IEEE Fellow Michael Wicks prior to his death in 2022. The grant provides travel support for graduate students who are the primary authors on a paper being presented at the annual IEEE Radar Conference. Wicks was an electronics engineer and a radio industry leader who was known for developing knowledge-based space-time adaptive processing. He believed in investing in the next generation and he wanted to provide an opportunity for that to happen.Ten graduate students have been awarded the Wicks grant to date. This year two students from Region 8 (Africa, Europe, Middle East) and two students from Region 10 (Asia and Pacific) were able to travel to Denver to attend the IEEE Radar Conference and present their research. The papers they presented are “Target Shape Reconstruction From Multi-Perspective Shadows in Drone-Borne SAR Systems” and “Design of Convolutional Neural Networks for Classification of Ships from ISAR Images.”

Life Fellow Fumio Koyama and IEEE Fellow Constance J. Chang-Hasnain proudly display their IEEE Nick Holonyak, Jr. Medal for Semiconductor Optoelectronic Technologies at this year’s IEEE Honors Ceremony. They are accompanied by IEEE President-Elect Kathleen Kramer and IEEE President Tom Coughlin.Robb Cohen

IEEE Nick Holonyak Jr. Medal for Semiconductor Optoelectronic Technologies

The IEEE Nick Holonyak Jr. Medal for Semiconductor Optoelectronic Technologies was created with a memorial fund supported by some of Holonyak’s former graduate students to honor his work as a professor and mentor. Presented on behalf of the IEEE Board of Directors, the medal recognizes outstanding contributions to semiconductor optoelectronic devices and systems including high-energy-efficiency semiconductor devices and electronics.

Holonyak was a prolific inventor and longtime professor of electrical engineering and physics. In 1962, while working as a scientist at General Electric’s Advanced Semiconductor Laboratory in Syracuse, N.Y., he invented the first practical visible-spectrum LED and laser diode. His innovations are the basis of the devices now used in high-efficiency light bulbs and laser diodes. He left GE in 1963 to join the University of Illinois Urbana-Champaign as a professor of electrical engineering and physics at the invitation of John Bardeen, his Ph.D. advisor and a two-time Nobel Prize winner in physics. Holonyak retired from UIUC in 2013 but continued research collaborations at the university with young faculty members.

“In addition to his remarkable technical contributions, he was an excellent teacher and mentor to graduate students and young electrical engineers,” says Russell Dupuis, one of his doctoral students. “The impact of his innovations has improved the lives of most people on the earth, and this impact will only increase with time. It was my great honor to be one of his students and to help create this important IEEE medal to ensure that his work will be remembered in the future.”

The award was presented for the first time at this year’s IEEE Honors Ceremony, in Boston, to IEEE Fellow Constance Chang-Hasnain and Life Fellow Fumio Koyama for “pioneering contributions to vertical cavity surface-emitting laser (VCSEL) and VCSEL-based photonics for optical communications and sensing.”

Establishing a memorial fund through the IEEE Foundation is a gratifying way to recognize someone who has touched your life while also advancing technology for humanity. If you are interested in learning more about memorial and tribute funds, reach out to the IEEE Foundation team: donate@ieee.org.

Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.

Humanoids 2024: 22–24 November 2024, NANCY, FRANCE

Enjoy today’s videos!

We’re hoping to get more on this from Boston Dynamics, but if you haven’t seen it yet, here’s electric Atlas doing something productive (and autonomous!).

And why not do it in a hot dog costume for Halloween, too?

[ Boston Dynamics ]

Ooh, this is exciting! Aldebaran is getting ready to release a seventh generation of NAO!

[ Aldebaran ]

Okay I found this actually somewhat scary, but Happy Halloween from ANYbotics!

[ ANYbotics ]

Happy Halloween from the Clearpath!

[ Clearpath Robotics Inc. ]

Another genuinely freaky Happy Halloween, from Boston Dynamics!

[ Boston Dynamics ]

This “urban opera” by Compagnie La Machine took place last weekend in Toulouse, featuring some truly enormous fantastical robots.

[ Compagnie La Machine ]

Thanks, Thomas!

Impressive dismount from Deep Robotics’ DR01.

[ Deep Robotics ]

Cobot juggling from Daniel Simu.

[ Daniel Simu ]

Adaptive-morphology multirotors exhibit superior versatility and task-specific performance compared to traditional multirotors owing to their functional morphological adaptability. However, a notable challenge lies in the contrasting requirements of locking each morphology for flight controllability and efficiency while permitting low-energy reconfiguration. A novel design approach is proposed for reconfigurable multirotors utilizing soft multistable composite laminate airframes.

[ Environmental Robotics Lab paper ]

This is a pitching demonstration of new Torobo. New Torobo is lighter than the older version, enabling faster motion such as throwing a ball. The new model will be available in Japan in March 2025 and overseas from October 2025 onward.

[ Tokyo Robotics ]

I’m not sure what makes this “the world’s best robotic hand for manipulation research,” but it seems solid enough.

[ Robot Era ]

And now, picking a micro cat.

[ RoCogMan Lab ]

When Arvato’s Louisville, Ky. staff wanted a robotics system that could unload freight with greater speed and safety, Boston Dynamics’ Stretch robot stood out. Stretch is a first of its kind mobile robot designed specifically to unload boxes from trailers and shipping containers, freeing up employees to focus on more meaningful tasks in the warehouse. Arvato acquired its first Stretch system this year and the robot’s impact was immediate.

[ Boston Dynamics ]

NASA’s Perseverance Mars rover used its Mastcam-Z camera to capture the silhouette of Phobos, one of the two Martian moons, as it passed in front of the Sun on Sept. 30, 2024, the 1,285th Martian day, or sol, of the mission.

[ NASA ]

Students from Howard University, Moorehouse College, and Berea College joined University of Michigan robotics students in online Robotics 102 courses for the fall ‘23 and winter ‘24 semesters. The class is part of the distributed teaching collaborative, a co-teaching initiative started in 2020 aimed at providing cutting edge robotics courses for students who would normally not have access to at their current university.

[ University of Michigan Robotics ]

Discover the groundbreaking projects and cutting-edge technology at the Robotics and Automation Summer School (RASS) hosted by Los Alamos National Laboratory. In this exclusive behind-the-scenes video, students from top universities work on advanced robotics in disciplines such as AI, automation, machine learning, and autonomous systems.

[ Los Alamos National Laboratory ]

This week’s Carnegie Mellon University Robotics Institute Seminar is from Princeton University’s Anirudha Majumdar, on “Robots That Know When They Don’t Know.”

Foundation models from machine learning have enabled rapid advances in perception, planning, and natural language understanding for robots. However, current systems lack any rigorous assurances when required to generalize to novel scenarios. For example, perception systems can fail to identify or localize unfamiliar objects, and large language model (LLM)-based planners can hallucinate outputs that lead to unsafe outcomes when executed by robots. How can we rigorously quantify the uncertainty of machine learning components such that robots know when they don’t know and can act accordingly?

[ Carnegie Mellon University Robotics Institute ]

This is a sponsored article brought to you by BESydney.

In July 2024, Sydney woman Katherine Bennell-Pegg made history as the first astronaut to graduate under the Australian flag and the first female astronaut in Australia. Her journey, marked by determination and discipline, showcases Australia’s growing prominence in space exploration and research.

From her academic achievements at the University of Sydney (USYD) to her rigorous training at the European Space Agency (ESA), Bennell-Pegg’s success has paved a path forward for aspiring space and aerospace professionals in Australia and globally.

A journey to the stars begins in Sydney

Katherine Bennell-Pegg was born in Sydney, New South Wales, and grew up in the Northern Beaches area. Her fascination with space began at an early age.

“I always dreamed of being an astronaut,” Bennell-Pegg shared in her “Insights from an Australian Astronaut” Space Forum Speech in July 2024. “When I was young, it was for the adventure, but after more than a decade working in space, it’s now because I know the role it plays in tackling real-world problems and developing new knowledge that can benefit our society, environment and science.”

Sydney: A Hub for Space Innovation

Sydney, the vibrant heart of the state of New South Wales (NSW), stands at the forefront of aerospace innovation in Australia. With its world-class research facilities, leading academic institutions and strategic geographic positioning, Sydney is not only Australia’s gateway to the Indo-Pacific but also a burgeoning hub for international aerospace endeavours.

NSW is home to more than 40 per cent of Australia’s aerospace industry. Substantial investments from both the state and federal governments support this concentration of capabilities, underpinning Sydney’s role as a leader in aerospace. From advanced manufacturing and cybersecurity to quantum technologies and space exploration, this progressive city is truly thriving.

Sydney’s appeal as a desirable location for hosting aerospace conferences and business events is bolstered by its comprehensive infrastructure, vibrant startup community and strategic position as a transport hub.

Sydney’s track record of successfully hosting events highlights the city’s ability to organise impactful international gatherings, including:

• Australian Space Summit
• New Horizons Summit
• CubeSatPlus2024 - NEW SPACE: Unbounded Skies

Sydney will also host the 76th International Astronautical Congress from 29 September to 3 October 2025 and the 34th Congress of the International Council for the Aeronautical Sciences (ICAS) to be held 13 to 17 September 2026. Both will take place at ICC Sydney, further solidifying Sydney’s status as a central hub for aerospace events.

Would you like to know more about Sydney’s credentials in Aerospace? Download our Aerospace eBook or visit besydney.com.au

Sydney proved to be the ideal location for Bennell-Pegg’s journey to begin. She studied at the University of Sydney, where she earned a Bachelor of Engineering (Honors) in Aeronautical Engineering (Space) and a Bachelor of Science (Advanced) in Physics.

Sydney’s universities are at the forefront of aerospace education and research. Institutions such as the University of Sydney (USYD), the University of New South Wales (UNSW Sydney) and the University of Technology Sydney (UTS) attract students from around the world. UNSW Sydney, with its School of Aerospace, Mechanical, and Mechatronic Engineering, is renowned for its innovative research in space technology and satellite systems, while UTS provides cutting-edge programs in aerospace engineering and physics, emphasizing practical applications and industry partnerships. USYD excels in aeronautical engineering and space science, supported by advanced facilities and strong ties to major aerospace organisations. Together, these universities offer comprehensive programs that integrate theoretical knowledge with hands-on experience, preparing students for dynamic careers in the rapidly evolving aerospace and space sectors.

Having excelled in her studies at USYD, Bennell-Pegg was awarded the Charles Kuller Graduation Prize for her top-placed undergraduate thesis. Subsequently, her quest for knowledge took her to Europe, where she earned two Master of Science degrees: one in Astronautics and Space Engineering from Cranfield University and another in Space Technology from Luleå University of Technology.

Reflecting on her educational path, Bennell-Pegg stated, “With the encouragement of my parents, I researched what it would take to become an astronaut and worked hard at school, participating in everything from aerobatic flying lessons to amateur astronomy.”

Inside the rigorous training regimen of an astronaut

Bennell-Pegg’s professional career began with roles at Airbus UK, where she contributed to numerous space missions and concept studies, such as Martian in-situ resource utilisation and space debris removal. Her expertise led her to the Australian Space Agency, where she became the Director of Space Technology.

In 2021, Bennell-Pegg was invited by the European Space Agency (ESA) to undertake Basic Astronaut Training at the European Astronaut Centre in Germany. When the ESA application opened in 2021, it was the first opening in 15 years. Bennell-Pegg jumped at the opportunity to apply alongside over 22,000 others from 22 countries. She endured six knock-out rounds, including medical, psychometrics, psychology and technical tests and made it to the group of 25 who passed.

This historic invitation marked the first time an international astronaut candidate was offered training by the ESA.

“The training was demanding, but it was also an incredible opportunity to learn from some of the best minds in the field and to be part of a team that is pushing the boundaries of human exploration.”—Katherine Bennell-Pegg

Bennell-Pegg’s training regimen was intense, encompassing physical conditioning, complex simulations, and theoretical classes designed to prepare candidates for long-duration missions to the International Space Station (ISS) and beyond. This included:

• Studies in biology, astronomy, earth sciences, meteorology, materials, medical and fluids, both in theory and in labs.
• Radiation research – an area of expertise for Australia. This will increase as humans travel back to the Moon.
• Medical operations: Astronauts need to be able to perform medical procedures on themselves and others.
• Training for expeditions: This included honing team dynamics through behavioral training, ocean and winter survival training, rescue and firefighting.

Sharing her thoughts on this transformative experience, Bennell-Pegg said, “The training was demanding, but it was also an incredible opportunity to learn from some of the best minds in the field and to be part of a team that is pushing the boundaries of human exploration.”

In April 2024, Bennell-Pegg completed her training, graduating with her ESA classmates from “The Hoppers” group. Upon graduation, she became fully qualified for assignments on long-duration missions to the ISS, making her the first Australian female astronaut and the first person to train as an astronaut under the Australian flag.

“I want to use this experience to open doors for Australian scientists and engineers to utilize space for their discoveries,” Bennell-Pegg said. “I hope to inspire the pursuit of STEM careers and show all Australians that they too can reach for the stars.”

Elevating Australia’s role in space exploration

Katherine Bennell-Pegg’s achievements represent a significant milestone. Her journey from the University of Sydney to the rigorous training programs at the European Astronaut Centre showcases the potential of Australian talent in the global space community.

“Being the first astronaut trained under the Australian flag is an incredible honor,” Bennell-Pegg said. “I’m grateful for the support that has fueled me through intense training and opened doors for more Australians in space exploration. Whether I fly or not, there is much to accomplish here on Earth. I’m excited to leverage this experience to inspire future generations in STEM and elevate Australia’s presence in the global space community. Becoming an astronaut is just the beginning.”

Bennell-Pegg’s dream to become an Australian astronaut is more than just a personal triumph; it is a win for anyone who aspires to a career in space or aerospace. Sydney, with its world-class educational institutions, advanced manufacturing facilities scheduled for the Western Sydney Aerotropolis and expanding opportunities in aerospace and defence, is an ideal starting point for anyone looking to make their mark in these sectors.

Would you like to know more about Sydney’s credentials in Aerospace? Download our Aerospace eBook or visit besydney.com.au

Azerbaijan next week will garner much of the attention of the climate tech world, and not just because it will host COP29, the United Nation’s giant annual climate change conference. The country is promoting a grand, multi-nation plan to generate renewable electricity in the Caucasus region and send it thousands of kilometers west, under the Black Sea, and into energy–hungry Europe.

The transcontinental connection would start with wind, solar, and hydropower generated in Azerbaijan and Georgia, and off-shore wind power generated in the Caspian Sea. Long-distance lines would carry up to 1.5 gigawatts of clean electricity to Anaklia, Georgia, at the east end of the Black Sea. An undersea cable would move the electricity across the Black Sea and deliver it to Constanta, Romania, where it could be distributed further into Europe.

The scheme’s proponents say this Caspian-Black Sea energy corridor will help decrease global carbon emissions, provide dependable power to Europe, modernize developing economies at Europe’s periphery, and stabilize a region shaken by war. Organizers hope to build the undersea cable within the next six years at an estimated cost of €3.5 billion (US $3.8 billion).

To accomplish this, the governments of the involved countries must quickly circumvent a series of technical, financial, and political obstacles. “It’s a huge project,” says Zviad Gachechiladze, a director at Georgian State Electrosystem, the agency that operates the country’s electrical grid, and one of the architects of the Caucasus green-energy corridor. “To put it in operation [by 2030]—that’s quite ambitious, even optimistic,” he says.

Black Sea Cable to Link Caucasus and Europe

The technical lynchpin of the plan falls on the successful construction of a high voltage direct current (HVDC) submarine cable in the Black Sea. It’s a formidable task, considering that it would stretch across nearly 1,200 kilometers of water, most of which is over 2 km deep, and, since Russia’s invasion of Ukraine, littered with floating mines. By contrast, the longest existing submarine power cable—the North Sea Link—carries 1.4 GW across 720 km between England and Norway, at depths of up to 700 meters.

As ambitious as Azerbaijan’s plans sound, longer undersea connections have been proposed. The Australia-Asia PowerLink project aims to produce 6 GW at a vast solar farm in Northern Australia and send about a third of it to Singapore via a 4,300-km undersea cable. The Morocco-U.K. Power Project would send 3.6 GW over 3,800 km from Morocco to England. A similar attempt by Desertec to send electricity from North Africa to Europe ultimately failed.

Building such cables involves laying and stitching together lengths of heavy submarine power cables from specialized ships—the expertise for which lies with just two companies in the world. In an assessment of the Black Sea project’s feasibility, the Milan-based consulting and engineering firm CESI determined that the undersea cable could indeed be built, and estimated that it could carry up to 1.5 GW—enough to supply over 2 million European households.

But to fill that pipe, countries in the Caucasus region would have to generate much more green electricity. For Georgia, that will mostly come from hydropower, which already generates over 80 percent of the nation’s electricity. “We are a hydro country. We have a lot of untapped hydro potential,” says Gachechiladze.

Azerbaijan and Georgia Plan Green Energy Corridor

Generating hydropower can also generate opposition, because of the way dams alter rivers and landscapes. “There were some cases when investors were not able to construct power plants because of opposition of locals or green parties” in Georgia, says Salome Janelidze, a board member at the Energy Training Center, a Georgian government agency that promotes and educates around the country’s energy sector.

“It was definitely a problem and it has not been totally solved,” says Janelidze. But “to me it seems it is doable,” she says. “You can procure and construct if you work closely with the local population and see them as allies rather than adversaries.”

For Azerbaijan, most of the electricity would be generated by wind and solar farms funded by foreign investment. Masdar, the renewable-energy developer of the United Arab Emirates government, has been investing heavily in wind power in the country. In June, the company broke ground on a trio of wind and solar projects with 1 GW capacity. It intends to develop up to 9 GW more in Azerbaijan by 2030. ACWA Power, a Saudi power-generation company, plans to complete a 240-MW solar plant in the Absheron and Khizi districts of Azerbaijan next year and has struck a deal with the Azerbaijani Ministry of Energy to install up to 2.5 GW of offshore and onshore wind.

CESI is currently running a second study to gauge the practicality of the full breadth of the proposed energy corridor—from the Caspian Sea to Europe—with a transmission capacity of 4 to 6 GW. But that beefier interconnection will likely remain out of reach in the near term. “By 2030, we can’t claim our region will provide 4 GW or 6 GW,” says Gachechiladze. “1.3 is realistic.”

COP29: Azerbaijan’s Renewable Energy Push

Signs of political support have surfaced. In September, Azerbaijan, Georgia, Romania, and Hungary created a joint venture, based in Romania, to shepherd the project. Those four countries in 2022 inked a memorandum of understanding with the European Union to develop the energy corridor.

The involved countries are in the process of applying for the cable to be selected as an EU “project of mutual interest,” making it an infrastructure priority for connecting the union with its neighbors. If selected, “the project could qualify for 50 percent grant financing,” says Gachechiladze. “It’s a huge budget. It will improve drastically the financial condition of the project.” The commissioner responsible for EU enlargement policy projected that the union would pay an estimated €2.3 billion ($2.5 billion) toward building the cable.

Whether next week’s COP29, held in Baku, Azerbaijan, will help move the plan forward remains to be seen. In preparation for the conference, advocates of the energy corridor have been taking international journalists on tours of the country’s energy infrastructure.

Looming over the project are the security issues threaten to thwart it. Shipping routes in the Black Sea have become less dependable and safe since Russia’s invasion of Ukraine. To the south, tensions between Armenia and Azerbaijan remain after the recent war and ethnic violence.

In order to improve relations, many advocates of the energy corridor would like to include Armenia. “The cable project is in the interests of Georgia, it’s in the interests of Armenia, it’s in the interests of Azerbaijan,” says Agha Bayramov, an energy geopolitics researcher at the University of Groningen, in the Netherlands. “It might increase the chance of them living peacefully together. Maybe they’ll say, ‘We’re responsible for European energy. Let’s put our egos aside.’”

Waiting for each part of a 3D-printed project to finish, taking it out of the printer, and then installing it on location can be tedious for multi-part projects. What if there was a way for your printer to print its creation exactly where you needed it? That’s the promise of MobiPrint, a new 3D printing robot that can move around a room, printing designs directly onto the floor.

MobiPrint, designed by Daniel Campos Zamora at the University of Washington, consists of a modified off-the-shelf 3D printer atop a home vacuum robot. First it autonomously maps its space—be it a room, a hallway, or an entire floor of a house. Users can then choose from a prebuilt library or upload their own design to be printed anywhere in the mapped area. The robot then traverses the room and prints the design.

It’s “a new system that combines robotics and 3D printing that could actually go and print in the real world,” Campos Zamora says. He presented MobiPrint on 15 October at the ACM Symposium on User Interface Software and Technology.

Campos Zamora and his team started with a Roborock S5 vacuum robot and installed firmware that allowed it to communicate with the open source program Valetudo. Valetudo disconnects personal robots from their manufacturer’s cloud, connecting them to a local server instead. Data collected by the robot, such as environmental mapping, movement tracking, and path planning, can all be observed locally, enabling users to see the robot’s LIDAR-created map.

Campos Zamora built a layer of software that connects the robot’s perception of its environment to the 3D printer’s print commands. The printer, a modified Prusa Mini+, can print on carpet, hardwood, and vinyl, with maximum printing dimensions of 180 by 180 by 65 millimeters. The robot has printed pet food bowls, signage, and accessibility markers as sample objects.

MakeabilityLab/YouTube

Currently, MobiPrint can only “park and print.” The robot base cannot move during printing to make large objects, like a mobility ramp. Printing designs larger than the robot is one of Campos Zamora’s goals in the future. To learn more about the team’s vision for MobiPrint, Campos Zamora answered a few questions from IEEE Spectrum.

What was the inspiration for creating your mobile 3D printer?

Daniel Campos Zamora: My lab is focused on building systems with an eye towards accessibility. One of the things that really inspired this project was looking at the tactile surface indicators that help blind and low vision users find their way around a space. And so we were like, what if we made something that could automatically go and deploy these things? Especially in indoor environments, which are generally a little trickier and change more frequently over time.

We had to step back and build this entirely different thing, using the environment as a design element. We asked: how do you integrate the real world environment into the design process, and then what kind of things can you print out in the world? That’s how this printer was born.

What were some surprising moments in your design process?

Campos Zamora: When I was testing the robot on different surfaces, I was not expecting the 3D printed designs to stick extremely well to the carpet. It stuck way too well. Like, you know, just completely bonded down there.

I think there’s also just a lot of joy in seeing this printer move. When I was doing a demonstration of it at this conference last week, it almost seemed like the robot had a personality. A vacuum robot can seem to have a personality, but this printer can actually make objects in my environment, so I feel a different relationship to the machine.

Where do you hope to take MobiPrint in the future?

Campos Zamora: There’s several directions I think we could go. Instead of controlling the robot remotely, we could have it follow someone around and print accessibility markers along a path they walk. Or we could integrate an AI system that recommends objects be printed in different locations. I also want to explore having the robot remove and recycle the objects it prints.

In physical books, yellowing pages are usually a sign of age. But brand-new users of Amazon’s Kindle Colorsofts, the tech giant’s first color e-reader, are already noticing yellow hues appearing at the bottoms of their displays.

Since the complaints began the trickle in, Amazon has reportedly suspended shipments and announced that it is working to fix the issue. (As of publication of this article, the US $280 Kindle had an average 2.6 star rating on Amazon.) It’s not yet clear what is causing the discoloration. But while the issue is new—and unexpected—the technology is not, says Jason Heikenfeld, an IEEE Fellow and engineering professor at the University of Cincinnati. The Kindle Colorsoft, which became available on 30 October, uses “a very old approach,” says Heikenfeld, who previously worked to develop the ultimate e-paper technology. “It was the first approach everybody tried.”

Amazon’s e-reader uses reflective display technology developed by E Ink, a company that started in the 1990s as an MIT Media Lab spin off before developing its now-dominant electronic paper displays. E Ink is used in Kindles, as well as top e-readers from Kobo, reMarkable, Onyx, and more. E Ink first introduced Kaleido—the basis of the Colorsoft’s display—five years ago, though the road to full-color e-paper started well before.

How E-Readers Work

Monochromatic Kindles work by applying voltages to electrodes in the screen that bring black or white pigment to the top of each pixel. Those pixels then reflect ambient light, creating a paper-like display. To create a full-color display, companies like E Ink added an array of filters just above the ink. This approach didn’t work well at first because the filters lost too much light, making the displays dark and low resolution. But with a few adjustments, Kaleido was ready for consumer products in 2019. (Other approaches—like adding colored pigments to the ink—have been developed, but these come with their own drawbacks, including a higher price tag.)

Given this design, it initially seemed to Heikenfeld that the issue would have stemmed from the software, which determines the voltages applied to each electrode. This aligned with reports from some users that the issue appeared after a software update.

But industry analyst Ming-Chi Kuo suggested in a post on X that the issue is due to the e-reader’s hardware. Amazon switched the optically clear adhesive (OCA) used in the Colorsoft to a material that may not be so optically clear. In its announcement of the Colorsoft, the company boasted “custom formulated coatings” that would enhance the color display as one of the new e-reader’s innovations.

In terms of resolving the issue, Kuo’s post also stated that “While component suppliers have developed several hardware solutions, Amazon seems to be leaning toward a software-based fix.” Heikenfeld is not sure how a software fix would work, apart from blacking out the bottom of the screen.

Amazon did not reply to IEEE Spectrum’s request for comment. In an email to IEEE Spectrum, E Ink stated, “While we cannot comment on any individual partner or product, we are committed to supporting our partners in understanding and addressing any issues that arise.”

The Future of E-Readers

It took a long time for color Kindles to arrive, and the future of reflective e-reader displays isn’t likely to improve much, according to Heikenfeld. “I used to work a lot in this field, and it just really slowed down at some point, because it’s a tough nut to crack,” Heikenfeld says.

There are inherent limitations and inefficiencies to working with filter-based color displays that rely on ambient light, and there’s no Moore’s Law for these displays. Instead, their improvement is asymptotic—and we may already be close to the limit. Meanwhile, displays that emit light, like LCD and OLED, continue to improve. “An iPad does a pretty damn good job with battery life now,” says Heikenfeld.

At the same time, he believes there will always be a place for reflective displays, which remain a more natural experience for our eyes. “We live in a world of reflective color,” Heikenfeld says.

This is story was updated on 12 November 2024 to correct that Jason Heikenfeld is an IEEE Fellow.

The IEEE Board of Directors shapes the future direction of IEEE and is committed to ensuring IEEE remains a strong and vibrant organization—serving the needs of its members and the engineering and technology community worldwide—while fulfilling the IEEE mission of advancing technology for the benefit of humanity.

This article features IEEE Board of Directors members ChunChe “Lance” Fung, Eric Grigorian, and Christina Schober.

IEEE Senior Member ChunChe “Lance” Fung

Director, Region 10: Asia Pacific

Joanna Mai Yie Leung

Fung has worked in academia and provided industry consultancy services for more than 40 years. His research interests include applying artificial intelligence, machine learning, computational intelligence, and other techniques to solve practical problems. He has authored more than 400 publications in the disciplines of AI, computational intelligence, and related applications. Fung currently works on the ethical applications and social impacts of AI.

A member of the IEEE Systems, Man, and Cybernetics Society, Fung has been an active IEEE volunteer for more than 30 years. As a member and chair of the IEEE Technical Program Integrity and Conference Quality committees, he oversaw the quality of technical programs presented at IEEE conferences. Fung also chaired the Region 10 Educational Activities Committee. He was instrumental in translating educational materials to local languages for the IEEE Reaching Locals project.

As chair of the IEEE New Initiatives Committee, he established and promoted the US $1 Million Challenge Call for New Initiatives, which supports potential IEEE programs, services, or products that will significantly benefit members, the public, the technical community, or customers and could have a lasting impact on IEEE or its business processes.

Fung has left an indelible mark as a dedicated educator at Singapore Polytechnic, Curtin University, and Murdoch University. He was appointed in 2015 as professor emeritus at Murdoch, and he takes pride in training the next generation of volunteers, leaders, teachers, and researchers in the Western Australian community. Fung received the IEEE Third Millennium Medal and the IEEE Region 10 Outstanding Volunteer Award.

IEEE Senior Member Eric Grigorian

Director, Region 3: Southern U.S. & Jamaica

Sean McNeil/GTRI

Grigorian has extensive experience leading international cross-domain teams that support the commercial and defense industries. His current research focuses on implementing model-based systems engineering, creating models that depict system behavior, interfaces, and architecture. His work has led to streamlined processes, reduced costs, and faster design and implementation of capabilities due to efficient modeling and verification. Grigorian holds two U.S. utility patents.

Grigorian has been an active volunteer with IEEE since his time as a student member at the University of Alabama in Huntsville (UAH). He saw it as an excellent way to network and get to know people. He found his personality was suited for working within the organization and building leadership skills. During the past 43 years as an IEEE member, he has been affiliated with the IEEE Aerospace and Electronic Systems (AESS), IEEE Computer, and IEEE Communications societies.

As Grigorian’s career has evolved, his involvement with IEEE has also increased. He has been the IEEE Huntsville Section student activities chair, as well as vice chair, and chair. He also was the section’s AESS chair. He served as IEEE SoutheastCon chair in 2008 and 2019, and served on the IEEE Region 3 executive committee as area chair and conference committee chair, enhancing IEEE members’ benefits, engagement, and career advancement. He has significantly contributed to initiatives within IEEE, including promoting preuniversity science, technology, engineering, and mathematics efforts in Alabama.

Grigorian’s professional achievements have been recognized with numerous awards from employers and local technical chapters, including with the 2020 UAH Alumni of Achievement Award for the College of Engineering and the 2006 IEEE Region 3 Outstanding Engineer of the Year Award. He is a member of the IEEE–Eta Kappa Nu honor society.

IEEE Life Senior Member Christina Schober

Director, Division V

Katie Fears/Brio Art

Schober is an innovative engineer with a diverse design and manufacturing engineering background. With more than 40 years of experience, her career has spanned research, design, and manufacturing sensors for space, commercial, and military aircraft navigation and tactical guidance systems. She was responsible for the successful transition from design to production for groundbreaking programs including an integrated flight management system, the Stinger missile’s roll frequency sensor, and the designing of three phases of the DARPA atomic clock. She holds 17 U.S. patents and 24 other patents in the aerospace and navigation fields.

Schober started her career in the 1980s, at a time when female engineers were not widely accepted. The prevailing attitude required her to “stay tough,” she says, and she credits IEEE for giving her technical and professional support. Because of her experiences, she became dedicated to making diversity and inclusion systemic in IEEE.

Schober has held many leadership roles, including IEEE Division VIII Director, IEEE Sensors Council president, and IEEE Standards Sensors Council secretary. In addition to her membership in the IEEE Photonics Society, she is active with the IEEE Computer Society, IEEE Sensors Council, IEEE Standards Association, and IEEE Women in Engineering.

She is also active in her local community, serving as an invited speaker on STEM for the public school system and was a volunteer at youth shelters. Schober has received numerous awards including the IEEE Sensors Council Lifetime Contribution Award and the IEEE Twin Cities Section’s Young Engineer of the Year Award. She is an IEEE Computer Society Gold Core member, a member of the IEEE–Eta Kappa Nu honor society and received the IEEE Third Millennium Medal.

Samples from the asteroid Ryugu contain key ingredients in the biological cookbook.

More blazes break out where wild land and urban areas overlap.

https://images.google.co.uk/url?q=https://yukselenakademi.com/kurs/detay/emlakcilik-belgesi-seviye-5

https://maps.google.co.uk/url?q=https://yukselenakademi.com/kurs/detay/emlakcilik-belgesi-seviye-5

Bütün ihtiyaçlara en iyi şekilde karşılık veren Samsun perde modelleri bütçe dostu fiyatlarla sunulmaktadır. Fon perde, tül perde, stor perde, güneşlik ve plise SAMSUN Ucuz Perde Modelleri ve Fiyatları. Siz hemen şimdi maviperde.com'dan güvenle alışveriş yapın, biz SAMSUN'un her yerine ucuz perde modellerini imalattan Samsun Perde Mağazaları ve PERDES Brillant Şubeleri: İlkadım, Atakum, Bafra, Çarşamba, Canik, Vezirköprü, Terme, Tekkeköy, Havza, 19 Mayıs, Alaçam perdeci, Samsun bölgesi zebra perdeci, zebra perdeci, perdeciler Samsun, perdeci adres Samsun, perde servisi. Samsun zebra perde montajı montajcısı. https://asrtekstil.com/

<a href="https://mtverify.com/" rel="nofollow ugc">먹튀검증</a> 전문가들이 꼼꼼하게 검증한 사이트만을 소개합니다. 안심하고 베팅하세요. 먹튀검증소: https://mtverify.com/

<a href="https://bluetechker.com/" rel="nofollow ugc">Blue Techker</a> naturally like your web site however you need to take a look at the spelling on several of your posts. A number of them are rife with spelling problems and I find it very bothersome to tell the truth on the other hand I will surely come again again.

<a href="https://offhd.com/" rel="nofollow ugc">먹튀검증커뮤니티</a> 전문가들이 꼼꼼하게 검증한 안전한 토토사이트를 소개합니다. 안심하고 베팅하세요. 먹튀오프: https://offhd.com/

Why are there so many VPNs for Apple TV? Oh, right—geofencing.

Xbox hardware sales dropped 29 percent, but that barely made a dent.

“I used to be proud of my work and excited about my future here. I don't feel that anymore."

Both hit weeks after OpenAI released a ChatGPT app.

Humane first reported overheating problems with the portable charger in June.

Will Apple keep one of the few single-fee alternatives to Photoshop available?

US restrictions on semiconductor tech are spurring the move.

Scientists continue to learn new things about the planet, its sweeping rings and its many moons

Fluff and fuzz helped the creatures keep warm, blend in and communicate

An ecologist’s long walks and detailed observations allowed him to chronicle the shifts in an iconic habitat and grow a once-overlooked branch of science

The huge spacecraft is headed toward the icy moon Europa, where it will use an array of instruments to survey for geologic activity, magnetism and more

Humans perfected how to identify wild animals over millennia, and now biologists are rediscovering the exceptional worth of the tracks and marks left behind

From the busy cities to ocean waters, our need to illuminate the world has had some strange and tragic consequences