X-ray ghost imaging with a crystal beam splitter has advantages in highly efficient imaging due to the simultaneous acquisition of signals from both the object beam and reference beam. However, beam splitting with a large field of view, uniform distribution and high correlation has been a great challenge up to now. Therefore, a dedicated beam splitter has been developed by optimizing the optical layout of a synchrotron radiation beamline and the fabrication process of a Laue crystal. A large field of view, consistent size, uniform intensity distribution and high correlation were obtained simultaneously for the two split beams. Modulated by a piece of copper foam upstream of the splitter, a correlation of 92% between the speckle fields of the object and reference beam and a Glauber function of 1.25 were achieved. Taking advantage of synthetic aperture X-ray ghost imaging (SAXGI), a circuit board of size 880 × 330 pixels was successfully imaged with high fidelity. In addition, even though 16 measurements corresponding to a sampling rate of 1% in SAXGI were used for image reconstruction, the skeleton structure of the circuit board can still be determined. In conclusion, the specially developed beam splitter is applicable for the efficient implementation of X-ray ghost imaging.

Soft X-ray spectroscopy is an important technique for measuring the fundamental properties of materials. However, for measurements of samples in the sub-millimetre range, many experimental setups show limitations. Position drifts on the order of hundreds of micrometres during thermal stabilization of the system can last for hours of expensive beam time. To compensate for drifts, sample tracking and feedback systems must be used. However, in complex sample environments where sample access is very limited, many existing solutions cannot be applied. In this work, we apply a robust computer vision algorithm to automatically track and readjust the sample position in the dozens of micrometres range. Our approach is applied in a complex sample environment, where the sample is in an ultra-high vacuum chamber, surrounded by cooled thermal shields to reach sample temperatures down to 2.5 K and in the center of a superconducting split coil. Our implementation allows sample-position tracking and adjustment in the vertical direction since this is the dimension where drifts occur during sample temperature change in our setup. The approach can be easily extended to 2D. The algorithm enables a factor of ten improvement in the overlap of a series of X-ray absorption spectra in a sample with a vertical size down to 70 µm. This solution can be used in a variety of experimental stations, where optical access is available and sample access by other means is reduced.

We present first hard X-ray photoelectron spectroscopy (HAXPES) results of aqueous salt solutions and dispersions of gold nanoparticles in liquid cells equipped with specially designed microfabricated thin silicon nitride membranes, with thickness in the 15–25 nm range, mounted in a high-vacuum-compatible environment. The experiments have been performed at the HAXPES endstation of the GALAXIES beamline at the SOLEIL synchrotron radiation facility. The low-stress membranes are fabricated from 100 mm silicon wafers using standard lithography techniques. Platinum alignment marks are added to the chips hosting the membranes to facilitate the positioning of the X-ray beam on the membrane by detecting the corresponding photoemission lines. Two types of liquid cells have been used, a static one built on an Omicron-type sample holder with the liquid confined in the cell container, and a circulating liquid cell, in which the liquid can flow in order to mitigate the effects due to beam damage. We demonstrate that the membranes are mechanically robust and able to withstand 1 bar pressure difference between the liquid inside the cell and vacuum, and the intense synchrotron radiation beam during data acquisition. This opens up new opportunities for spectroscopic studies of liquids.

The design and first results of a high-transmission soft X-ray spectrometer operated at the X-SPEC double-undulator beamline of the KIT Light Source are presented. As a unique feature, particular emphasis was placed on optimizing the spectrometer transmission by maximizing the solid angle and the efficiencies of spectrometer gratings and detector. A CMOS detector, optimized for soft X-rays, allows for quantum efficiencies of 90% or above over the full energy range of the spectrometer, while simultaneously offering short readout times. Combining an optimized control system at the X-SPEC beamline with continuous energy scans (as opposed to step scans), the high transmission of the spectrometer, and the fast readout of the CMOS camera, enable the collection of entire rapid resonant inelastic soft X-ray scattering maps in less than 1 min. Series of spectra at a fixed energy can be taken with a frequency of up to 5 Hz. Furthermore, the use of higher-order reflections allows a very wide energy range (45 to 2000 eV) to be covered with only two blazed gratings, while keeping the efficiency high and the resolving power E/ΔE above 1500 and 3000 with low- and high-energy gratings, respectively.

Conic sections are commonly used in reflective X-ray optics. Hyperbolic mirrors can focus a converging light source and are frequently paired with elliptical or parabolic mirrors in Wolter type configurations. This paper derives the closed-form expression for a mirror-centered hyperbolic shape, with zero-slope at the origin. Combined with the slope and curvature, such an expression facilitates metrology, manufacturing and mirror-bending calculations. Previous works consider ellipses, parabolas, magnifying hyperbolas or employ lengthy approximations. Here, the exact shape function is given in terms of the mirror incidence angle and the source and image distances.

Hard X-ray microscopes with 20–30 nm spatial resolution ranges are an advanced tool for the inspection of materials at the nanoscale. However, the limited efficiency of the focusing optics, for example, a Fresnel zone plate (ZP) lens, can significantly reduce the power of a nanoprobe. Despite several reports on ZP lenses that focus hard X-rays with 20 nm resolution – mainly constructed by zone-doubling techniques – a systematic investigation into the limiting factors has not been reported. We report the structural effects on the focusing and imaging efficiency of 20–30 nm-resolution ZPs, employing a modified beam-propagation method. The zone width and the duty cycle (zone width/ring pitch) were optimized to achieve maximum efficiency, and a comparative analysis of the zone materials was conducted. The optimized zone structures were used in the fabrication of Pt-hydrogen silsesquioxane (HSQ) ZPs. The highest focusing efficiency of the Pt-HSQ-ZP with a resolution of 30 nm was 10% at 7 keV and >5% in the range 6–10 keV, whereas the highest efficiency of the Pt-HSQ-ZP with a resolution of 20 nm was realized at 7 keV with an efficiency of 7.6%. Optical characterization conducted at X-ray beamlines demonstrated significant enhancement of the focusing and imaging efficiency in a broader range of hard X-rays from 5 keV to 10 keV, demonstrating the potential application in hard X-ray focusing and imaging.

Autonomous methods to align beamlines can decrease the amount of time spent on diagnostics, and also uncover better global optima leading to better beam quality. The alignment of these beamlines is a high-dimensional expensive-to-sample optimization problem involving the simultaneous treatment of many optical elements with correlated and nonlinear dynamics. Bayesian optimization is a strategy of efficient global optimization that has proved successful in similar regimes in a wide variety of beamline alignment applications, though it has typically been implemented for particular beamlines and optimization tasks. In this paper, we present a basic formulation of Bayesian inference and Gaussian process models as they relate to multi-objective Bayesian optimization, as well as the practical challenges presented by beamline alignment. We show that the same general implementation of Bayesian optimization with special consideration for beamline alignment can quickly learn the dynamics of particular beamlines in an online fashion through hyperparameter fitting with no prior information. We present the implementation of a concise software framework for beamline alignment and test it on four different optimization problems for experiments on X-ray beamlines at the National Synchrotron Light Source II and the Advanced Light Source, and an electron beam at the Accelerator Test Facility, along with benchmarking on a simulated digital twin. We discuss new applications of the framework, and the potential for a unified approach to beamline alignment at synchrotron facilities.

SPring-8-II is a major upgrade project of SPring-8 that was inaugurated in October 1997 as a third-generation synchrotron radiation light source. This upgrade project aims to achieve three goals simultaneously: achievement of excellent light source performance, refurbishment of aged systems, and significant reduction in power consumption for the entire facility. A small emittance of 50 pm rad will be achieved by (1) replacing the existing double-bend lattice structure with a five-bend achromat one, (2) lowering the stored beam energy from 8 to 6 GeV, (3) increasing the horizontal damping partition number from 1 to 1.3, and (4) enhancing horizontal radiation damping by installing damping wigglers in long straight sections. The use of short-period in-vacuum undulators allows ultrabrilliant X-rays to be provided while keeping a high-energy spectral range even at the reduced electron-beam energy of 6 GeV. To reduce power consumption, the dedicated, aged injector system has been shut down and the high-performance linear accelerator of SACLA, a compact X-ray free-electron laser (XFEL) facility, is used as the injector of the ring in a time-shared manner. This allows the simultaneous operation of XFEL experiments at SACLA and full/top-up injection of the electron beam into the ring. This paper overviews the concept of the SPring-8-II project, the system design of the light source and the details of the accelerator component design.

Tranglo, a global cross-border payments company, has expanded...

PayPoint has announced its partnership with

Italy-based unicorn Satispay has announced...

InComm Payments has acquired the digital gift card provider

XMDS Holding has launched XPP, a new umbrella organisation...

Japan-based AEON has announced the launch of a...

The Lufthansa Group has teamed up with

Mirakl has announced its partnership with

Paymentology has entered into a referral partnership with...

Digital wallet and fintech platform Careem Pay has launched...

PayComplete has unveiled a report that...

Tide, a UK-based business...

The inaugural edition of the Global Payments and Fintech Trends Report offers a comprehensive overview of the key trends in fintech and payments for the year 2024 and beyond.

The Global Overview of Payment Providers Report provides insights into the leading companies and trends in the field of payments.

The first edition of the Unlocking the Potential of A2A Payments Report 2024 provides the latest insights into the A2A space.

 ‘The Road Ahead: Towards Seamless Payments Interoperability’, an eBook from Thunes, Visa, and The Paypers, explores how payments interoperability is reshaping the future of cross-border transactions.

Archival still from the documentary "Street Gang: How We Got to Sesame Street"; Credit: HBO

This content is from Southern California Public Radio. View the original story at SCPR.org.

Tadanobu Asano (L) and Chin Han (R) in "Mortal Kombat."; Credit: Warner Bros. Pictures

This content is from Southern California Public Radio. View the original story at SCPR.org.

Jason Statham's character H in the film "Wrath of Man"; Credit: Metro Goldwyn Mayer Pictures

This content is from Southern California Public Radio. View the original story at SCPR.org.

Canada-based fintech firm Nuvei has partnered with

Payment orchestration platform FinMont has partnered with...

Token Payment Services (TOKEN) has announced that it obtained its...

The UAE has announced the introduction of 'Palm ID' technology, a payment solution that utilises the unique vein patterns in individuals' palms for...

Thunes has announced the expansion of its Direct Global Network...

Lithuania-based Genome has launched SEPA Instant Transfers,...

Mastercard has launched the Mastercard Move Commercial...

Yuno, a provider of payment orchestration, has...

TerraPay, a global money movement company,...

Mastercard has joined

US-based digital payments provider Checkout.com has...

BuzzAR has launched BuzzPay,...

Thunes, a global cross-border payments platform, has announced a...

FOMO Pay, a payment institution based in Singapore, has...

Kevin Smith with a room full of his own strain of pot, created for his new film, "Tusk." ; Credit: James Kim/KPCC

When Kevin Smith records his podcast, Smodcast, he says, "I'm usually blazed." Which, if you've heard the episode where Smith comes up with the entire story for his new film, "Tusk," it should come as no surprise.

The film is about a man who takes another man hostage and turns him into a walrus. While the movie itself doesn't mention or include any weed, Smith thought medical marijuana would be a nice complement to the viewing experience. 

A24, the film distribution company, came to Smith with a marketing idea: create strains of weed for the film. Smith thought it was genius. Buds and Roses — a cannabis dispensary in Studio City — was approached by Smith and his team to make medical marijuana specifically for the film. The dispensary came up with two strains called "Mr. Tusk" and "White Walrus." 

We met up with the director at Buds and Roses to see why the green substance was a perfect pairing for the film: 

Interview Highlights:

Smith knows that some people enjoy going to the movies stoned: 

"This movie, out of all movies, seems like a real head trip of a flick. So if they have their medical marijuana card, by all means, enjoy the movie. Don't feel the need to go back if you don't remember anything. It's not a gimmick to make them go twice or anything. But in a world where people are gonna smoke medicinal marijuana, having a 'Tusk' sticker on there just makes me smile. Kind of makes sense for this movie." 

How Fleetwood Mac and weed helped his writing:

"I put on Fleetwood Mac's 'Tusk' over and over on repeat and would just sit there and blaze while I wrote. And you know, I blaze in the way that I used to smoke cigarettes. So, I'll light it and put it in an ashtray, let it burn and stuff. So it fills the room like incense if you will. But, yeah, for a movie like 'Tusk,' I guess you gotta be pretty stoned to make the guy-who-makes-a-guy-into-a-walrus movie. And I'm kinda glad I did. It's weird. People are calling it the best movie I've ever made and I was like, 'Well, this is the only one I made stoned.' So I'm like, 'Guess what I'm doing, kids!'"

Smith used to be against drugs: 

"I smoked weed in my life, but I would never consider myself a stoner. In fact, I still had the '80s [attitude] lingering, 'Just say no,' and,  you know, 'Oh my lord! It's a drug!' It wasn't until I became older — age 38 — when I started smoking weed on a regular basis. I was like, 'This is not a drug. This is ridiculous! It grows in the Earth.' So once I got past the bias that was pounded into us in the '80s, suddenly I was like, 'Heavens. I like who I am here.' It doesn't make you a better person, kids. It doesn't make you more creative. What it does is it kind of knocks fear on its ass. You face your fears a little better." 

Disclaimer: Smith wants you to know that he does not endorse marijuana for anyone under 21:

"Kids, teenagers... I'm talking to you. The teenage brain is stunted by marijuana smoking so you guys have to wait 'til you're older. I didn't start smoking 'til I was 38 years old. I'm not saying wait 'til then. That was a stupid mistake on my behalf. But wait until you're legit. Wait until you're 21 before you start smoking." 

Source: Streetwise Reports 10/28/2024

Atlas Lithium Corp. (ATLX:NASDAQ) announced that it has received the operational permit for its Neves Project. This marks a significant milestone for the company's ambitions in lithium production. The permit, approved by the Minas Gerais government in Brazil, allows Atlas Lithium to assemble and operate its processing plant, develop open-pit mining operations, and produce lithium concentrate. The unanimously voted October 25 decision officially progressed with the publication in Minas Gerais' government gazette the following day.

The Neves Project permit, a comprehensive triphasic license (LI/LP/LO), enables a more streamlined development, encompassing initial, installation, and operating permissions.

"Permitting is widely considered the most critical risk in any mining project," said Atlas Lithium CEO Marc Fogassa in the news release. The company's success in obtaining this permit underscores its commitment to sustainable, responsible operations in Brazil's "Lithium Valley."

The Allure of The Lithium Market

According to Visual Capitalist on September 29, battery metal prices have recently "struggled as a surge in new production overwhelmed demand." However, with battery demand projected to increase ninefold by 2040, companies positioned to produce high-quality lithium concentrate, such as Atlas Lithium, are likely to see enhanced market relevance as the demand trajectory for lithium-ion batteries strengthens significantly over the coming decades.

Jake Sekelsky from Alliance Global Partners reaffirmed his "Buy" rating for Atlas Lithium, setting a price target of US$45.00.

As Forbes wrote on October 8, 2024, recent industry dynamics have shown that "a 50% rise in the price of a downtrodden lithium producer has boosted investor hopes that a revival in the battery metal is possible after two grim years of oversupply and low prices."

This improvement in lithium prices reflects a broader trend that may positively impact companies like Atlas Lithium, whose operational progress aligns with the gradual sector recovery. The recent permitting for Atlas Lithium's Neves Project positions it to capitalize on these trends as it advances its lithium production capabilities.

On that same day, Barry Dawes of Martin Place Securities commented that "the lithium market is showing strong signs of upturn," anticipating "lithium shortages post-2027." This outlook emphasizes the sector's potential for heightened demand and supply constraints, which is particularly beneficial for projects advancing toward production. Atlas Lithium's strategy, which includes a modular processing plant and environmentally responsible operations, underscores the company's readiness to meet this anticipated demand.

What's Driving Atlas Forward?

Atlas Lithium's Neves Project's recent permit positions the company to advance toward its production goals with key environmental and operational clearances in place. According to the company's September 2024 investor presentation, this approval aligns with an expedited project timeline and enhances the company's potential to become a low-cost lithium concentrate producer. With Brazil's favorable mining conditions and Atlas Lithium's established partnerships with Tier 1 global companies, the Neves Project is poised for cost-effective operations and market alignment.

Atlas's modular processing plant, currently in the final pre-shipment stage, also demonstrates a strategic focus on efficiency and ESG standards. This advanced plant is set for rapid assembly and installation. It reflects Atlas Lithium's intention to minimize environmental impact and expedite production ramp-up, contributing to a streamlined path toward production in Brazil's burgeoning lithium sector.

Analysts On Atlas

Jake Sekelsky from Alliance Global Partners reaffirmed his "Buy" rating for Atlas Lithium, setting a price target of US$45.00. He described the recent operational permit issuance for the Neves Project as a "significant de-risking event," emphasizing that this milestone positions the project to move forward with construction and operations. Sekelsky highlighted that the approval "marks the final step in the permitting process" and grants Atlas Lithium the authorization to proceed with assembling its processing facility and initiating open-pit mining operations. This development aligns with a clear production path, with Sekelsky noting that the project is now at "shovel-ready status," a critical advancement toward fulfilling Atlas Lithium's strategic objectives. [OWNERSHIP_CHART-11040]

Sekelsky also pointed to the current market environment for lithium, expressing optimism regarding "signs of an upcoming recovery" in lithium prices. He interpreted recent merger and acquisition activities within the sector, including other acquisitions in Brazil's Lithium Valley, as indicators that larger players anticipate a rebound. Sekelsky remarked that this resurgence could benefit advanced hard-rock lithium projects, such as Neves, which "continue to command attention from potential suitors."

Ownership and Share Structure

About 34% of Atlas Lithium is owned by management and insiders. About 11% of the shareholders are institutional. Strategic partners hold another 12%. The rest, about 43%, is retail.

Top shareholders include Waratah Capital Advisors Ltd. with 4.34%, Mitsui & Co. Ltd. with 12.27%, and Candace Shira Associates LLC with 1.39%, according to Reuters.

Its market cap is about US$165 million. It trades in a 52-week range of US$34 and US$6.25.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1) James Guttman wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an employee.

2) This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

( Companies Mentioned: ATLX:NASDAQ, )

Off-Ramp's Rosalie Atkinson, her dad, and her dad's mustache circa quite a few facial hair fads ago. (Credit: Rosalie Atkinson); Credit:

These cool tips would have landed in your in-box with no extra effort on your part IF you'd subscribed to Off-Ramp's weekly e-newsletter. We send out a recommendation every week, along with all the latest Off-Ramp news. Sign up now!

Father's Day is coming quick! But before you run to Walgreen's Sunday morning to find they are sold out of touching cards for the father figure in your life, let us help you curate a fun day out with dad.

Thinking about significant-figure holidays, there seems to be more of a method for planning Mother's Day surprises. You get the breakfast-in-bed together quietly for mom or grandma or aunt, etc., wake her up early on a Sunday, she quickly scrambles to hide the fact that she decided to sleep pantsless, then you present her with some poorly made waffles and juice which she will inevitably spill on her white sheets.

But what about your father-figure? A card? Yes. Maybe a golf ball? Okay. A mug you Amazon Prime'd to him in a last-ditch effort that says "Captain Dad?" Don't do that. It might be weird to ask the men in our life, "What the hell do you want?" under the veil of Father's Day, so to spare you we've compiled some ideas.

Idea #1: Take your father to get pampered! Spa days are are not gender-specific and when was the last time someone even looked at your dad's feet? Hollywood salon Hammer & Nails focuses on men's cuticle care. Treat your dad to a MANi-pedi, and he'll also enjoy a glass of bourbon, a personal flatscreen TV with noise-cancelling headphones, all while relaxing in an over-sized leather chair. Although Hammer & Nails targets men, women are also welcome. 8257 Melrose Ave, Los Angeles, CA 90046.

Idea #2: Take in a tasting. Greenbar Distillery is LA's first spirit distillery since the Prohibition was repealed in 1933. They boast the "World's largest portfolio of organic spirits." Take a tour, pose with their gigantic copper stills and whiskey barrels, sign up for a class, or just taste some of their 16 spirits and five bitters. Their tours are reserved for Saturday so consider this a pregame to your other Father's Day plans. 2459 E 8th St, Los Angeles, California, 90021.

Idea #3: Younger kids? Let's play! Sunday, the Autry Museum of the American West is opening a new exhibit about the history of play. Experience the next generation of toys and games, but also see how they differ across generations and cultures. The exhibit is very interactive and the museum is in beautiful Griffith Park, so there are plenty of hiking trails, picnic spots, or viewpoints to snap some pictures with your man/men.  234 Museum Drive, Los Angeles, CA 90065 .

Idea #4: The Abbey's annual Father's Day Brunch. For the past six years, The Abbey in West Hollywood has hosted a brunch in celebration of LGBT families or those considering starting one. There will be a breakfast buffet from 9am-1pm and attendees can get more info about fostering opportunities. $18 per person. 692 N Robertson Blvd, West Hollywood, CA 90069 .

Much love to all the dads, uncles, grandpas, friends, and men nurturing other people!

This content is from Southern California Public Radio. View the original story at SCPR.org.

; Credit: John Rabe/KPCC

Off-Ramp fan, KPCC member (!), and Tom Petty and Heartbreakers keyboardist Benmont Tench III joined John in his old Mercedes with his large, but portable Casio.

Tench has lived in the hills of Tarzana for decades, in a perfectly good house, but in the 100-degree heat, John outfitted his car with condenser mikes to record a farewell ode to Off-Ramp, Tench's "Like the Sun."

The full band version of Benmont Tench III's "Like the Sun"

"Like the Sun" helped Tench get back in the songwriting groove a decade ago after he burnt out on being professional songwriter in Nashville. He based the lyrics on tours of Los Angeles given to him by a friend, and takes the listener (with his Southern accent) from a restaurant called Michoacan to a hill top tent city. Tench also told John how he and his wife Alice explore Los Angeles.

This content is from Southern California Public Radio. View the original story at SCPR.org.

Stones Throw DJ Peanut Butter Wolf spinning.; Credit: Photo by Maris Kaplan via Flickr Creative Commons

For the final Off-Ramp recommendation, we scoured the internet far and wide for options that really speak to Angeleno culture and the show's mission of spreading LA love far and wide. However, upon thoughtful reflection, we've decided the show has always been about getting out and trying fun, new things and learning something. Every engaged community member getting out in Southern California adds to the cultural wealth of the city and so this weekend, let's get out and play/shake it fast and loose.

LA has multiple cheap or free events this weekend to get you out into the city, meeting new people, and that will have you considering shaking your groove-thang on a sliding scale, from gingerly to furiously.

1. Dance DTLA

During summer, The Music Center celebrates multicultural dance with alternating lessons and performances, each Friday. Friday the 30th will feature a DJ set curated by local label Stones Throw's golden boy Peanut Butter Wolf. The night will include sets by Peanut Butter Wolf, DJ Steve, Vex Ruffin, and Jimi Hey playing the 80's and 90's hits that inspired their music careers. The performances will include Funk, Soul, Disco, New Wave, and Rap reimaginings. The event is entirely free and begins at 9pm at 200 N Grand Ave, Los Angeles, 90012.

2. Grand performances: First peoples, New voices.

As part of their free summer concert series, Grand Performances has curated a line-up of fantastic Hip-Hop performers, emboldened with an indigenous perspective. The MCs are encouraging Hip-Hop fans to come experience "raw lyrics, urgent poetry, and iconic dance" by a selection of performers representing native Southern California groups, spreading their culture and passion. The event runs 8pm-10:30pm on Saturday at 350 S Grand Ave, Los Angeles, 90071.

3. House Party LA + DoLA: The Biggest Dollar Party Ever!

Event group House Party LA has outdone themselves on this Saturday's event. Yes, there will be great performers: Tiger, Suga Shay, Gianna Lee, and DJ Damage. Yes, admission is $1, or $5 without a facebook RSVP. But here is the real draw: slices of pizza are just $1. Cheap fun, music, and cheap pizza? That is the selling point to end all selling points. Unless they were giving out free cars and puppies... which we can't rule out just yet, you had best to go and investigate for yourself. The event starts at 9pm and will run until 2am at the Regent, located at 448 S Main St, Los Angeles, 90013.

A fond farewell to all the Off-Ramp recommendation readers and takers. It's been a pleasure.

This content is from Southern California Public Radio. View the original story at SCPR.org.

Off-Ramp host John Rabe and Mayor Eric Garcetti playing backgammon in John’s car. Julian “The First Lady of Off-Ramp” Bermudez in the passenger seat with camera. ; Credit: Andrea Garcia

John Rabe’s last show coincides with Eric Garcetti’s inauguration for his second term as Mayor of Los Angeles. In John's car, the two talked about:

• The joys of exploring Los Angeles
• The time the future Mayor's mom and dad took his drivers' license away
• Where Justin Trudeau should visit when he comes to LA
• And how the drop in crime has led to more people doing the Off-Ramp thing

The Mayor also did some slam poetry, and then played a competitive game of backgammon. Listen with the audio player to see who was brown and who was white. And listen to Off-Ramp on the radio to find out who won the game! (Saturday at noon/Sunday at 6pm)

This content is from Southern California Public Radio. View the original story at SCPR.org.

Brad and George Takei, the new typical American married couple.; Credit: John Rabe/Grant Wood/Michael Uhlenkott

UPDATE: “Allegiance” will be performed Feb. 21-April 1, 2018, at the Aratani Theater at the Japanese Cultural and Community Center in downtown L.A.'s Little Tokyo.

ORIGINAL STORY: In an intimate interview, George Takei tells Off-Ramp host John Rabe about crafting the Japanese-American internment camp history into compelling Broadway musical theater. "Allegiance," with Takei, Lea Salonga and Telly Leung, played at the Longacre Theater.

George Takei and his husband Brad were putting their house in mothballs when I arrived for our interview in August. They'd already been spending a lot of time in New York because of George's recurring role on "The Howard Stern Show," but now, with the Broadway opening of "Allegiance" just a couple months away, they were preparing to move for as long as the musical brings in the crowds.

While Brad went off to deal with the mundane domestic tasks around the move, I sat with George in their living room to talk about turning one of America's most shameful episodes — the internment of some 120,000 loyal Japanese-Americans during World War II — into a musical that could make it on the Broadway stage.

George, you just sent an email to your fans with the subject line: "I've Waited 7 Years to Send You this Email. Seven years!" Inside, you wrote: "Few things are as difficult and complex as taking a show to ‪Broadway‬. It's both thrilling and terrifying." What was terrifying?

"The terrifying part is, you've poured your passion, your energy, your resources ...  you make all that investment in that project, and then you're hoping the seats are going to be filled.That 'what if' is terrifying. But in San Diego, we had a sold-out run and broke their 77-year record. But now we're going to Broadway, and that same fear is there. Will they come? What will the critics say? Because it's life or death."

It took a long time just to get a Broadway theater.

"It took a long time to get a theater.You think there are a lot of Broadway theaters, but there are even more productions that want those chunks of New York real estate. So we thought we'd get in line. But then the other discovery we made is that the theater owners have relationships with grizzled old producers who have brought them a vast fortune with enormous hits, and they can cut in line. They have a track record. And so, 'will we ever get a theater' became a big question. But we have this time now — let's use it creatively, productively."

So, Takei says, the team tweaked the show, removing parts that didn't work didn't advance the story, inserting numbers that worked better and kept the story moving. They doubled down on social media, building and proving demand in the show.

"We have a Shubert theater (the Longacre), and Bob Wankel is head guy there, and I remember pouring my heart out, telling the story of my parents, hoping that touches. And he was understanding, but I understood his problem, too. Everybody is trying to get a theater and he has to make a good business decision and was initially skeptical. An internment camp musical? But music has the power to make an anguished painful situation even more moving, even more powerful. It hits you in the heart."

Highlights from "Allegiance" at the Old Globe in San Diego

This is your Broadway debut, right? Are you petrified?

"Yes, yes. I've done a lot of stage work, and I've done a lot of public speaking, but it's Broadway, and I'm a debutante... at 78 years old! And it's the critics, too. The New York Times, Ben Brantley. That's who I'm going to be facing, and so it's both exciting and absolutely filling me with ecstasy, but what makes it ecstatic is the fear."

For much more of our interview with George Takei, listen to the audio by clicking the arrow in the player at the top of the page ... and hear George Takei and John Rabe's duet of "Tiny Bubbles."

This content is from Southern California Public Radio. View the original story at SCPR.org.