Aim/Purpose: ******************************************************************************************** After its investigation, the Research Ethics, Integrity, and Governance team at RMIT University found that the primary author of this paper breached the Australian Code and/or RMIT Policy and requested that the article be retracted. ********************************************************************************************* This paper aimed to examine the impact of knowledge management on firm innovativeness of multinational enterprises (MNEs) via the mediating role of innovative culture in Malaysia. Background: Inadequate management practices and growing competition among MNEs operating in developing nations, notably in Malaysia, have hindered their organizational success. Although several studies have shown that knowledge management has a substantial impact on MNEs’ success, it is not apparent if innovation at the company level has a direct impact on their performance. Thus, there is no definitive evidence between knowledge management with business innovativeness and organizational success. Methodology: This study adopted a quantitative approach based on a cross-sectional survey and descriptive design to gather the data in a specific period. A convenient sampling approach was used to select 296 respondents from Malaysia-dependent MNEs of different industries. One of the advantages of this study methodology is that the sample targeted many fields. Afterward, SPSS AMOS 24.0 software package analysis was performed to test the hypotheses. Contribution: The study contributes to knowledge management and firm innovativeness literature through advancing innovative culture as a mediating factor that accounts for the link between these two constructs, especially from an emerging economy perspective. The research findings also offer managerial implications for organizations in their quest to improve firm innovativeness. Findings: The results support that innovative culture significantly affects MNEs’ performance. Innovative culture enhances the capability of MNEs to be innovative that finally leads to the superior performance of firm innovativeness. Recommendations for Practitioners: According to this research, companies that exhibit an innovative culture, the acquisition of new information, the conversion of tacit knowledge into explicit knowledge, the application of knowledge, and the safeguarding of knowledge, all have a positive effect on their innovativeness. This means that for organizations to run an innovative MNE in Malaysia, a creative culture must be fostered since the current study has shown how it is seen as a catalyst that facilitates learning, transformation, and implementation of relevant knowledge. Recommendation for Researchers: Future studies should be carried out in other sectors aside from the manufacturing sector using the same scales used to measure knowledge management. Furthermore, a comparative analysis of knowledge management and firm innovativeness using innovative culture as a mediator should be researched in other developing economies. Impact on Society: While the main aim of this study was to better understand how and why MNEs operate the way they do, it had an indirect impact on the business and political tactics taken by CEOs and managers working in MNEs in developing countries, as this research has shown. Future Research: Future research should employ the methodology presented in this study and pursue this in other sectors, such as emerging and developed nations’ major businesses, to validate the results and further generalize the conclusions. Other methods should also be incorporated to investigate the other dimensions of MNEs’ performance, including market orientation, technology orientation, and entrepreneurial orientation.

Aim/Purpose: This research investigates the influence of soft skills on graduates’ employability in the technology industry, using the technology industry sector in Malaysia as a case. Background: Organizations are looking for appropriate mechanisms to hire qualified employees with strong soft skills and hard skills. This requires that job candidates possess a set of qualifications and skills which impact their employability. Methodology: Fuzzy Delphi analysis was conducted as preliminary study to identify the critical soft skills required by technology industry sector. The preliminary study produced ten critical soft skills to form a conceptual model of their influence on employability. Then, an online questionnaire survey was distributed in two industry companies in Malaysia to collect research data, and regression analysis was conducted to validate the conceptual model. Contribution: This research focuses on the influence of soft skills on graduate employability in the technology industry sector, since the selection of the best candidate in the industry will improve employee performance and lead to business success. Findings: The results of regression analysis confirmed that Communication skills, Attitude, Integrity, Learnability, Motivation, and Teamwork are significantly correlated with employability, which means that these soft skills are the critical factors for employability in Malaysian technology companies. Recommendations for Practitioners: The model proposed in this article can be used by employers to give better assessment of candidates’ compatibility with the jobs available. Impact on Society: This research highlights the critical soft skills required by technology industry sector, which will reduce the unemployment percentages among graduates. Future Research: More studies are required to examine the soft skills found in the literature and to define the most important skills from a general perspective of the industry. Future research should assess the moderating role of other variables, such as skills gap, employee performance, and employee knowledge. Furthermore, it is recommended to conduct similar studies of soft skills for employability in other countries.

Aim/Purpose: The need to explore leaders’ role as a mediating factor between knowledge sharing and firms’ competitiveness was the focus of this paper. Further, gaps related to knowledge sharing influence on firms’ competitiveness from an emerging economy perspective was a major driver of this study. Background: The relevance of knowledge sharing is today crucial for firms that seek to harness internal resource innovation towards ensuring increased competitiveness. The link between the actions of leaders and outcomes from sharing knowledge towards increased competitiveness would further advance theory on knowledge sharing and provide managerial implication that is instrumental for an improved organisational outcome. Methodology: The study sample was 282 participants and Partial least square structural equation model was used for the analysis of the data obtained through a questionnaire survey with the aid of SmartPLSv3.9. Contribution: The study contributes to knowledge management literature through advancing leadership as a mediating factor that accounts for the link between knowledge sharing and firms’ competitiveness, most especially from an emerging economy perspective. Findings: Knowledge sharing was found to have a positive effect on firms’ competitiveness. The study found that leadership behaviour mediates the relationship between knowledge sharing and a firm’s competitiveness. Recommendations for Practitioners: The study recommends that, when supported with the right attitude from leaders in the organisation, knowledge sharing will be beneficial towards the firm gaining competitiveness most especially. Future Research: Future studies should be carried out in other sectors aside from the manufacturing sector using the same measures used to measure knowledge sharing. Also, a comparative analysis of knowledge sharing and firms’ competitiveness using leaders’ behaviour as a mediator should be researched in other developing economies.

Aim/Purpose: This study investigated a model of mobile esports acceptance among urban citizens based on an extended Technology Acceptance Model (TAM). Background: Currently, esports are increasingly popular and in demand by the public. Supported by the widespread development of mobile devices, it has become an interactive market trend to play games in a new model, mobile esports. Methodology: This study collected data from 400 respondents and analyzed it using partial least squares-structural equation modeling (PLS-SEM). Contribution: This study addresses two research gaps. The first gap is limited esports information systems studies, particularly in mobile esports acceptance studies. The second gap is limited exploration of external variables in online gaming acceptance studies. Thus, this study proposed a TAM extended model by integrating the TAM native variables with other external variables such as visual appeal, enjoyment, social interaction, and competition to explore mobile esports acceptance by urban citizens. Findings: Nine hypotheses were accepted, and four were rejected. The visual appeal did not affect the acceptance. Meanwhile, social interaction and enjoyment significantly affected both perceived ease of use and usefulness. However, perceived ease of use surprisingly had an insignificant effect on attitude toward using mobile esports. Moreover, competition significantly affected the acceptance, particularly on perceived usefulness. Recommendations for Practitioners: Fresh and innovative features, such as new game items or themes, should be frequently introduced to enhance players’ continued enjoyment. Moreover, mobile esports providers should offer a solid platform to excite players’ interactions to increase the likelihood that users feel content. On the other hand, the national sports ministry/agency or responsible authorities should organize many esports competitions, big or small, to search for new talents. Recommendation for Researchers: Visual appeal in this study did not influence the perceived ease of use or usefulness. However, it could affect enjoyment. Thus, it would be worth revisiting the relationship between visual appeal and enjoyment. At the same time, perceived ease of use is a strong driver for the continued use of most online games, but not in this study. It could indicate significant differences between mobile esports and typical online games, one of which is the different purposes. Users might play online games for recreational intention, but players would use mobile esports to compete, win, or even get monetary rewards. Therefore, although users might find mobile esports challenging and hard to use, they tend to keep playing it. Thus, monetary rewards could be considered a determinant of the continuation of use. Impact on Society: Nowadays, users are being paid for playing games. It also would be an excel-lent job if they become professional esports athletes. This study investigated factors that could affect the continued use of mobile esports. Like other jobs, playing games professionally in the long term could make the players tedious and tired. Therefore, responsible parties, like mobile esports providers or governments, could use the recommendations of this study to promote positive behavior among the players. They will not feel like working and still con-sider playing mobile esports a hobby if they happily do the job. In the long run, the players could also make a nation’s society proud if they can be a champion in prestigious competitions. Future Research: A larger sample size will be needed to generalize the results, such as for a nation. It is also preferable if the sample is randomized systematically. Future works should also investigate whether the same results are acquired in other mobile esports. Furthermore, to extend our knowledge and deepen our understanding of the variables that influence mobile esports adoption, the subsequent research could look at other mobile esports acceptability based on characteristics of system functionality and moderator effects. Finally, longitudinal data-collecting approaches are suggested for future studies since behavior can change over time.

Aim/Purpose: This study examined the relationship between critical success factors (CSFs), perceived benefits, and usage intention of Mobile Knowledge Management Systems (MKMS) via an integrated Technology Acceptance Model (TAM) and Information Systems Success Model (ISSM). Background: This study investigates the CSFs (i.e., Strategic Leadership, Employee Training, System Quality, and Information Quality) that impact the usage intention of KMS in mobile contexts which have been neglected. Since users normally consider the usefulness belief in a system before usage, this study examines the role of perceived benefits as a mediator between the CSFs and usage intention. Methodology: A survey-based research approach in the Malaysian semiconductor industry was employed via an integrated model of TAM and ISSM. At a response rate of 59.52%, the findings of this study were based on 375 usable responses. The data collected was analyzed using the Partial Least Squares with SmartPLS 3.0. Contribution: This study contributes to the body of knowledge in the areas of mobile technology acceptance and knowledge management. Specifically, it helps to validate the integrated model of TAM and ISSM with the CSFs from knowledge management and information system. In addition, it provides the would-be adopters of MKMS with valuable guidelines and insights to consider before embarking on the adoption stage. Findings: The findings suggest that Employee Training and Information Quality have a positive significant relationship with Perceived MKMS Benefits. On the contrary, Strategic Leadership, System Quality, and Perceived User-friendliness showed an insignificant relationship with Perceived MKMS Benefits. Additionally, Employee Training and Information Quality have an indirect relationship with MKMS Usage Intention which is mediated by Perceived MKMS Benefits. Recommendations for Practitioners: The findings are valuable for managers, engineers, KM practitioners, KM consultants, MKMS developers, and mobile device producers to enhance MKMS usage intention. Recommendation for Researchers: Researchers would be able to conduct more inter-disciplinary studies to better understand the relevant issues concerning both fields – knowledge management and mobile computing disciplines. Additionally, the mediation effect of TAM via Perceived Usefulness (i.e., perceived MKMS benefits) on usage intention of MKMS should be further investigated with other CSFs. Future Research: Future studies could perhaps include other critical factors from both KM and IS as part of the external variables. Furthermore, Perceived Ease of Use (i.e., Perceived User-friendly) should be tested as a mediator in the future, together with Perceived Usefulness (i.e., perceived MKMS Benefits) to compare which would be a more powerful predictor of usage intention. Moreover, it may prove interesting to find out how the research framework would fit into other industries to verify the findings of this study for better accuracy and generalizability.

Aim/Purpose: The aim of the study is to explore factors that affect how healthcare clients in rural areas use infomediaries in maternal mHealth interventions. The study focuses on maternal healthcare clients who do not own mobile phones but use the mHealth intervention. Background: Maternal mHealth interventions in poor-resource settings are bedevilled by inequalities in mobile phone ownership. Clients who do not own mobile phones risk being excluded from benefiting from the interventions. Some maternal mHealth providers facilitate the access of mobile phones for those who do not own them using “infomediaries”. Infomediaries, in this case, refer to individuals who have custody of mobile phones that other potential beneficiaries may use. However, the use of infomediaries to offer access to the “have nots” may be influenced by a number of factors. Methodology: The study uses a case of a maternal mHealth intervention project in Malawi, as well as a qualitative research method and interpretive paradigm. Data was collected using secondary data from the implementing agency, semi-structured interviews, and focus group discussions. Empirical data was collected from maternal healthcare clients who do not own mobile phones and infomediaries. Data were analysed inductively using thematic analysis. Contribution: The study proposed a theoretical framework for studying infomediaries in ICT4D. The study may inform mHealth designers, implementers, and policymakers on how infomediaries could be implemented in a rural setting. Consequently, understanding the factors that affect the use of infomediaries may inform mHealth intervention implementers on how they could overcome the challenges by implementing mHealth interventions that reduce the challenges on the mHealth infomediaries side, and the maternal healthcare clients’ side. Findings: Characteristics of the maternal healthcare client, characteristics of the mHealth infomediary, perceived value of mHealth intervention, and socio-environmental factors affect maternal healthcare clients’ use of mHealth infomediaries. Recommendations for Practitioners: Implementers of interventions ought to manage the use of infomediaries to avoid volunteer fatigue and infomediaries who may not be compatible with the potential users of the intervention. Implementers could leverage traditional systems of identifying and using infomediaries instead of reinventing the wheel. Recommendation for Researchers: This research adopted a single case study to develop the theoretical framework for mHealth infomediary use. We recommend future studies are conducted in order to test and develop this framework further, not only in ICT4D, but also in other areas of application. Impact on Society: People still lack access. The lack of ownership of technology may still exclude them from participating in an information society. The use of infomediaries may help to provide access to technologies to those who do not have them thereby bridging the digital divide gap. Future Research: We propose herein that traditional systems may offer a good starting point for designing a system that would work for communities. We, therefore, recommend that future research may explore these possibilities.

Aim/Purpose: This study identifies the elements that influence intentions to purchase from the most popular Arabic online classifieds platform, OpenSooq.com. Background: Online purchasing has become popular among consumers in the past two decades, with perceived risk and trust playing key roles in consumers’ intention to purchase online. Methodology: A questionnaire survey was conducted of Internet users from three Jordanian districts to investigate how they used the OpenSooq platform in their e-commerce activities. In total, 202 usable responses were collected, and the data were analyzed with PLS-SEM for hypothesis testing and model validation. Contribution: Though online trading is increasingly popular, the factors that impact the behavior of consumers when purchasing high-value products have not been adequately investigated. Therefore, this study examined the factors affecting perceived risk, and the potential impact of privacy concerns on the perceived risk of online smartphone buyers. The study framework can help explore online behavior in various situations to ascertain similarities and differences and probe other aspects of online buying. Findings: Perceived risk negatively correlates with online purchasing behavior and trust. However, privacy concern and perceived risk, transaction security and trust, and trust and online purchasing behavior exhibited positive correlations. Recommendations for Practitioners: Customers can complete and retain online purchases in a range of settings illuminated in this study’s methods and procedures. Moreover, businesses can manage their IT arrangements to make Internet shopping more convenient and build processes for online shopping that allow for engagement, training, and ease of use, thus improving their customers’ online purchasing behavior. Recommendation for Researchers: Given the insight into the understanding and integration of variables including perceived risk, privacy issues, trust, transaction security, and online purchasing behavior, academics can build on the groundwork of this research paradigm to investigate underdeveloped countries, particularly Jordan, further. Impact on Society: Understanding the characteristics that influence online purchasing behavior can help countries realize the full potential of online shopping, particularly the benefits of safe, fast, and low-cost financial transactions without the need for an intermediary. Future Research: Future research can examine the link between online purchase intent, perceived risk, privacy concerns, trust, and transaction security to see if the findings of this study in Jordan can be applied to a broader context in other countries.

Aim/Purpose: This research aims to analyze the effect of human resource management on humanitarian operations performance, using humanitarian organizations in Malaysia as a case. Background: Humanitarian organizations need to develop and continue effective on-the-job human resource management, such as training and development and managing employee performance to enhance the performance of their humanitarian operations. Methodology: The sampling technique that was conducted is probability sampling. In particular, the technique is called stratified sampling. This technique is chosen because it is involving the division of a population into a smaller group, called “strata”. The questionnaire survey was distributed to humanitarian organizations in Malaysia to collect research data, and PLS-SEM analysis was conducted to validate the conceptual model. Contribution: This research focuses on the effect of human resource management on humanitarian operations performance in humanitarian organizations with consistent training to ensure successful humanitarian operations. Findings: The results of PLS-SEM analysis confirmed that Training and Employee Development, Recruitment and Employee Selection, and Communicative Management Style are significantly correlated with humanitarian operations performance, giving 75.7% variations which means that these human resource management are critical factors for increasing humanitarian operations performance in Malaysian humanitarian organizations. Recommendations for Practitioners: This research will enhance humanitarian operations performance for humanitarian organizations, in-line policies outlined under the Malaysia National Security Council Directive No. 20, and benefit the field of disaster management. Recommendation for Researchers: This research can be used by the authorized individual involved in humanitarian operations to satisfy the needs of the victims, which ultimately contributes to the performance of these humanitarian organizations. Impact on Society: This research highlighted the human resource management that is vital for humanitarian organizations, which will increase humanitarian operations performance in an organization. Future Research: This study is conducted in the context of humanitarian organizations in Malaysia. It is unclear whether the key findings of this study can be generalized. Therefore, it is suggested that, in future research, the current research model should be extended to include different countries for validation.

Aim/Purpose: The present study examines the effect of perceived organisational and co-worker support on the adjustment of repatriates and its impact on their intention to transfer knowledge in multinational companies (MNCs). It also examines the relationship between perceived organisational support, co-worker support, and knowledge transfer through the mediating role of repatriate adjustment. Background: The ability of acquiring and utilising international knowledge is one of the core competitive advantages of MNCs. This knowledge is transferred by MNCs across their subsidiaries efficiently through repatriates, which will result in superior performance when compared to their local competitors. But in MNCs the expatriation process has been given more emphasis than the repatriation process; therefore, there is limited knowledge about repatriation knowledge transfer. Practically, the knowledge transferred by repatriates is not managed properly by the MNCs. Methodology: The proposed model was supported by Uncertainty Reduction Theory, Organisational Socialisation Theory, Organisational Support Theory, and Socialisation Resource Theory. The data were gathered from 246 repatriates working in Indian MNCs in the manufacturing and information technology sectors who had been on an international assignment for at least one year. The data obtained were analysed using Structural Equation Modeling (SEM) using AMOS 21 software. Contribution: The present study expands prior research on repatriate knowledge transfer by empirically investigating the mediating role of repatriate adjustment between perceived support and repatriate knowledge transfer in MNCs. The present study also highlights that organisational and co-worker support during repatriation is beneficial for repatriate knowledge transfer. It is important that MNCs initiate support practices during repatriation to motivate repatriates to transfer international knowledge. Findings: The results revealed that both perceived organisational and co-worker support had a significant role in predicting repatriate adjustment in MNCs. Furthermore, the results also revealed that perceived organisational and co-worker support increases repatriate knowledge transfer through repatriate adjustment in MNCs. Recommendations for Practitioners: This study indicates the role of management in motivating repatriates to transfer their knowledge to the organisation. The management of MNCs develop HR policies and strategies leading to high perceived organisational support, co-worker support, and repatriate adjustment. They need to pay particular attention to the factors that affect the repatriates’ intention to share knowledge with others in the organisation. Recommendation for Researchers: Researchers can use the validated measurement instrument which could be essential for the advancement of future empirical research on repatriate knowledge transfer. Impact on Society: The present study will assist MNCs in managing their repatriates during the repatriation process by developing an appropriate repatriation support system. This will help the repatriates to better adjust to their repatriation process which will motivate them to transfer the acquired knowledge. Future Research: Future research can adopt a longitudinal style to test the different levels of the adjustment process which will help in better understanding the repatriate adjustment process. Additionally, this model can be tested with the repatriates of other countries and in diverse cultures to confirm its external validity. Furthermore, future research can be done with the repatriates who go on an international assignment through their own initiative (self-initiated expatriates).

Aim/Purpose: Systematic literature reviews seek to locate all studies that contain material of relevance to a research question and to synthesize the relevant outcomes of those studies. The primary aim of this paper was to synthesize both research and practice reports on micro-credentials (MCRs). Background: There has been an increase in reports and research on the plausibility of MCRs to support dynamic human skills development for an increasingly impatient and rapidly changing digital world. The integration of fast-paced emerging technologies and digitalization necessitate alternative learning paradigms. MCRs offer time, financial, and space flexibility and can be stacked into a larger qualification, thereby allowing for a broader range of transdisciplinary competencies within a qualification. However, MCRs often lack the academic rigor required for accreditation within existing disciplines. Methodology: The study followed the PRISMA framework (Preferred Reporting Items for Systematic Reviews and Meta Analyses), which offers a rigorous method to enhance reporting quality. The study used both academic research and practice reports. Contribution: The paper makes a theoretical contribution to the discourse about the need for innovation within existing educational paradigms for continued relevance in a changing world. It also contributes to the debate on the role of MCRs in bridging the gap between practice and academia despite the growing difference between their interests, and the role that MCRs play in the social-economic plans of countries. Findings: The key findings are that investments in MCRs are mainly in the Science, Technology, Engineering and Mathematics (STEM) and Education sectors, and have taken place mainly in high-income countries and regions – contexts that particularly value practice-accredited MCRs. Low-income countries, by contrast, remain traditional and insist on MCRs that are formally accredited by a recognized academic institution. This contributes to a widening skills gap between low- and high-income countries or regions, which results in greater global disparities. There is also a growing divide between academia and practice concerning their interest in MCRs (a reflection of the rigor versus relevance debate), which partially explains why many global and larger organizations have gone on to create their own learning institutions. Recommendations for Practitioners: We recommend that educational mechanisms consider the critical importance of MCRs as part of innovative efforts for life-wide (different sectors) and life-long (same sector) learning, especially in low-income countries. MCRs provide dynamic mechanisms to fill skills gaps in an increasing ruthless international battle for talent. Recommendation for Researchers: We recommend focused research into skills and career pathways using MCRs while at the same time remaining responsive to transdisciplinary efforts and sensitive to global and local changes within any sector. Impact on Society: Work and society have transformed over time, and more so in the new digital age, yet academia has been slow in adapting to the changes, forcing organizations to create their own learning institutions or to use MCRs to fill the skills gap. The purpose of education goes beyond preparing individuals for work, extending further to creating an environment where individuals and governments seek their own social and economic outcomes. MCRs provide a flexible means for co-creation between individuals, education, organizations, and government that could stem global rising unemployment, social exclusion, and redundancy. Future Research: Future research should focus on the co-creation of MCRs between practitioners and academia.

Aim/Purpose: The aim of this paper is to examine the influences of KM-centred strategies on innovation capability among Malaysian R&D firms. It also deepens understanding of the pathways and conditions to improve the innovation capability by assessing the mediating role of both KM practices, i.e., knowledge exploration practices, and knowledge exploitation practices. Background: Knowledge is the main organisational resource that is able to generate a competitive advantage through innovation. It is a critical success driver for both knowledge exploration and exploitation for firms to achieve sustainable competitive advantages. Methodology: A total of 320 questionnaires were disseminated to Malaysian R&D firms and the response rate was 47 percent. The paper utilised structural equation modelling and cross-sectional design to test hypotheses in the proposed research model. Contribution: This paper provides useful information and valuable initiatives in exploring the mediating role of knowledge exploration and knowledge exploitation in influencing innovation in Malaysian R&D firms. It helps R&D firms to frame their KM activities to drive the capability of creating and retaining a greater value onto their core business competencies. Findings: The findings indicate that all three KM-centred strategies (leadership, HR practices, and culture) have a direct effect on innovation. In addition, KM exploration practices mediate HR practices on innovation while KM exploitation mediates both leadership and HR practices on innovation. Recommendations for Practitioners: This paper serves as a guide for R&D managers to determine the gaps and appropriate actions to collectively achieve the desired R&D results and national innovation. It helps R&D firms frame their KM activities to enhance the capability of creating and retaining a greater value to their core business competencies. Recommendation for Researchers: This paper contributes significantly to knowledge management and innovation research by establishing new associations among KM-centred strategies, i.e., leadership, HR practices, and culture, both KM practices (knowledge exploration and knowledge exploitation), and innovation. Impact on Society: This paper highlights the important role of knowledge leaders and the practice of effective HR practices to help R&D firms to create a positive environment that facilitates both knowledge exploration and knowledge exploitation in enhancing innovation capabilities. Future Research: Further research could use a longitudinal sample to examine relationships of causality, offering a more comprehensive view of the effect of KM factors on innovation over the long term. Future research should also try to incorporate information from new external sources, such as customers or suppliers.

Aim/Purpose: This paper aims to analyze the availability and pricing of perishable farm produce before and during the lockdown restrictions imposed due to Covid-19. This paper also proposes machine learning and deep learning models to help the farmers decide on an appropriate market to sell their farm produce and get a fair price for their product. Background: Developing countries like India have regulated agricultural markets governed by country-specific protective laws like the Essential Commodities Act and the Agricultural Produce Market Committee (APMC) Act. These regulations restrict the sale of agricultural produce to a predefined set of local markets. Covid-19 pandemic led to a lockdown during the first half of 2020 which resulted in supply disruption and demand-supply mismatch of agricultural commodities at these local markets. These demand-supply dynamics led to disruptions in the pricing of the farm produce leading to a lower price realization for farmers. Hence it is essential to analyze the impact of this disruption on the pricing of farm produce at a granular level. Moreover, the farmers need a tool that guides them with the most suitable market/city/town to sell their farm produce to get a fair price. Methodology: One hundred and fifty thousand samples from the agricultural dataset, released by the Government of India, were used to perform statistical analysis and identify the supply disruptions as well as price disruptions of perishable agricultural produce. In addition, more than seventeen thousand samples were used to implement and train machine learning and deep learning models that can predict and guide the farmers about the appropriate market to sell their farm produce. In essence, the paper uses descriptive analytics to analyze the impact of COVID-19 on agricultural produce pricing. The paper explores the usage of prescriptive analytics to recommend an appropriate market to sell agricultural produce. Contribution: Five machine learning models based on Logistic Regression, K-Nearest Neighbors, Support Vector Machine, Random Forest, and Gradient Boosting, and three deep learning models based on Artificial Neural Networks were implemented. The performance of these models was compared using metrics like Precision, Recall, Accuracy, and F1-Score. Findings: Among the five classification models, the Gradient Boosting classifier was the optimal classifier that achieved precision, recall, accuracy, and F1 score of 99%. Out of the three deep learning models, the Adam optimizer-based deep neural network achieved precision, recall, accuracy, and F1 score of 99%. Recommendations for Practitioners: Gradient boosting technique and Adam-based deep learning model should be the preferred choice for analyzing agricultural pricing-related problems. Recommendation for Researchers: Ensemble learning techniques like Random Forest and Gradient boosting perform better than non-Ensemble classification techniques. Hyperparameter tuning is an essential step in developing these models and it improves the performance of the model. Impact on Society: Statistical analysis of the data revealed the true nature of demand and supply and price disruption. This analysis helps to assess the revenue impact borne by the farmers due to Covid-19. The machine learning and deep learning models help the farmers to get a better price for their crops. Though the da-taset used in this paper is related to India, the outcome of this research work applies to many developing countries that have similar regulated markets. Hence farmers from developing countries across the world can benefit from the outcome of this research work. Future Research: The machine learning and deep learning models were implemented and tested for markets in and around Bangalore. The model can be expanded to cover other markets within India.

Aim/Purpose: ************************************************************************ After its investigation, the Research Ethics, Integrity, and Governance team at RMIT University found that the primary author of this paper breached the Australian Code and/or RMIT Policy and requested that the article be retracted. ************************************************************************** This paper aimed to examine the influence of ethical and transformational leadership on employee creativity in Malaysia’s private higher education institutions (PHEIs) and the mediating role of organizational citizenship behavior. Background: To ensure their survival and success in today’s market, organizations need people who are creative and driven. Previous studies have demonstrated the importance of ethical leadership in fostering employee innovation and good corporate responsibility. Research on ethical leadership and transformational leadership, in particular, has played a significant role in elucidating the role of leadership in relation to organizational citizenship behavior (OCB). In this study, we have focused on ethical and transformational leadership as an antecedent for enhancing employee creativity. Despite an increase in leadership research, little is known about the underlying mechanisms that link ethical leadership and transformational leadership to OCB. Because it sheds light on factors other than ethical leadership and transformational leadership that influence employees’ extra-role activity, this research is relevant theoretically. OCB may have a mediating function between ethical leadership and transformational leadership style and employee creativity because it is associated with the greatest outcomes, but empirical research has yet to prove this. So, one of the study’s goals is to add to the hypotheses about how ethical leadership style and transformational leadership affect employee creativity by using an important mediating variable – OCB. Methodology: This study adopted a quantitative approach based on a cross-sectional survey and descriptive design to gather the data in a specific period. A convenient sampling approach was used to gauge 275 employees from Malaysia’s PHEIs. To test the hypotheses and obtain a conclusion, the acquired data was analyzed using the partial least square technique (PLS-SEM). Contribution: The study contributes to leadership literature by advancing OCB as a mediating factor that accounts for the link between ethical and transformational leadership and employee creativity in the higher education sector. Findings: According to the research, OCB has a substantial influence on the creativity of employees. Furthermore, ethical leadership boosted OCB and boosted employee creativity, according to the research. OCB and employee creativity have both been demonstrated to benefit greatly from transformational leadership. Further research revealed that OCB is a mediating factor in the link between leadership styles and creative thinking among employees. Recommendations for Practitioners: Higher education institutions should focus on developing leaders who value transparency and self-awareness in their interactions with followers and who demonstrate an inner moral perspective in addition to balanced information processing to ensure positive outcomes at the individual and organizational levels. Higher education institutions should place a priority on hiring leaders that exhibit ethical and transformational traits to raise awareness of these leadership styles among employees. Recommendation for Researchers: The new study also adds significantly to the body of knowledge by examining the relationship between ethical and transformational leadership and the creativity of the workforce. It aimed to identify the relationship between transformational leadership style and individual creativity in higher education by examining the mediating influence of OCB. Impact on Society: Higher education institutions should devise strategies for developing ethical and transformative leaders who will assist boost OCB and creativity within their workforce. Students and faculty in higher education can benefit from these leadership methods by learning to think in more diverse ways and by developing thought processes that lead to a larger pool of innovative ideas and solutions. As a consequence, employees who show creative behavior may be effectively managed by leaders who utilize ethical and transformational leadership styles and motivate them to show OCB that allow them to solve creative problems creatively. Future Research: A mixed-methods approach should be used in future research, and this should be done in public institutions in developing and developed nations to put the findings to use and generalize them even further. Future research will be able to examine other mediators to learn more about how and why ethical and transformational leadership styles affect PHEI employees’ creativity.

Aim/Purpose: Acquisitions play a pivotal role in the growth strategy of a firm. Extensive resources and time are dedicated by a firm toward the identification of prospective acquisition candidates. The Indian manufacturing sector is currently experiencing significant growth, organically and inorganically, through acquisitions. The principal aim of this study is to explore models that can predict acquisitions and compare their performance in the Indian manufacturing sector. Background: Mergers and Acquisitions (M&A) have been integral to a firm’s growth strategy. Over the years, academic research has investigated multiple models for predicting acquisitions. In the context of the Indian manufacturing industry, the research is limited to prediction models. This research paper explores three models, namely Logistic Regression, Decision Tree, and Multilayer Perceptron, to predict acquisitions. Methodology: The methodology includes defining the accounting variables to be used in the model which have been selected based on strong theoretical foundations. The Indian manufacturing industry was selected as the focus, specifically, data for firms listed in the Bombay Stock Exchange (BSE) between 2010 and 2022 from the Prowess database. There were multiple techniques, such as data transformation and data scrubbing, that were used to mitigate bias and enhance the data reliability. The dataset was split into 70% training and 30% test data. The performance of the three models was compared using standard metrics. Contribution: The research contributes to the existing body of knowledge in multiple dimensions. First, a prediction model customized to the Indian manufacturing sector has been developed. Second, there are accounting variables identified specific to the Indian manufacturing sector. Third, the paper contributes to prediction modeling in the Indian manufacturing sector where there is limited research. Findings: The study found significant supporting evidence for four of the proposed hypotheses indicating that accounting variables can be used to predict acquisitions. It has been ascertained that statistically significant variables influence acquisition likelihood: Quick Ratio, Equity Turnover, Pretax Margin, and Total Sales. These variables are intrinsically linked with the theories of liquidity, growth-resource mismatch, profitability, and firm size. Furthermore, comparing performance metrics reveals that the Decision Tree model exhibits the highest accuracy rate of 62.3%, specificity rate of 66.4%, and the lowest false positive ratio of 33.6%. In contrast, the Multilayer Perceptron model exhibits the highest precision rate of 61.4% and recall rate of 64.3%. Recommendations for Practitioners: The study findings can help practitioners build custom prediction models for their firms. The model can be developed as a live reference model, which is continually updated based on a firm’s results. In addition, there is an opportunity for industry practitioners to establish a benchmark score that provides a reference for acquisitions. Recommendation for Researchers: Researchers can expand the scope of research by including additional classification modeling techniques. The data quality can be enhanced by cross-validation with other databases. Textual commentary about the target firms, including management and analyst quotes, provides additional insight that can enhance the predictive power of the models. Impact on Society: The research provides insights into leveraging emerging technologies to predict acquisitions. The theoretical basis and modeling attributes provide a foundation that can be further expanded to suit specific industries and firms. Future Research: There are opportunities to expand the scope of research in various dimensions by comparing acquisition prediction models across industries and cross-border and domestic acquisitions. Additionally, it is plausible to explore further research by incorporating non-financial data, such as management commentary, to augment the acquisition prediction model.

Aim/Purpose: The aim of this research paper is to suggest a comprehensive model that incorporates the technology acceptance model with the task-technology fit model, information quality, security, trust, and managerial support to investigate the intended usage of big data analytics (BDA) in banks and insurance companies. Background: The emergence of the concept of “big data,” prompted by the widespread use of connected devices and social media, has been pointed out by many professionals and financial institutions in particular, which makes it necessary to assess the determinants that have an impact on behavioral intention to use big data analytics in banks and insurance companies. Methodology: The integrated model was empirically assessed using self-administered questionnaires from 181 prospective big data analytics users in Moroccan banks and insurance firms and examined using partial least square (PLS) structural equation modeling. The results cover sample characteristics, an analysis of the validity and reliability of measurement models’ variables, an evaluation of the proposed hypotheses, and a discussion of the findings. Contribution: The paper makes a noteworthy contribution to the BDA adoption literature within the finance sector. It stands out by ingeniously amalgamating the Technology Acceptance Model (TAM) with Task-Technology Fit (TTF) while underscoring the critical significance of information quality, trust, and managerial support, due to their profound relevance and importance in the finance domain. Thus showing BDA has potential applications beyond the finance sector. Findings: The findings showed that TTF and trust’s impact on the intention to use is considerable. Information quality positively impacted perceived usefulness and ease of use, which in turn affected the intention to use. Moreover, managerial support moderates the correlation between perceived usefulness and the intention to use, whereas security did not affect the intention to use and managerial support did not moderate the influence of perceived ease of use. Recommendations for Practitioners: The results suggest that financial institutions can improve their adoption decisions for big data analytics (BDA) by understanding how users perceive it. Users are predisposed to use BDA if they presume it fits well with their tasks and is easy to use. The research also emphasizes the importance of relevant information quality, managerial support, and collaboration across departments to fully leverage the potential of BDA. Recommendation for Researchers: Further study may be done on other business sectors to confirm its generalizability and the same research design can be employed to assess BDA adoption in organizations that are in the advanced stage of big data utilization. Impact on Society: The study’s findings can enable stakeholders of financial institutions that are at the primary stage of big data exploitation to understand how users perceive BDA technologies and the way their perception can influence their intention toward their use. Future Research: Future research is expected to conduct a comparison of the moderating effect of managerial support on users with technical expertise versus those without; in addition, international studies across developed countries are required to build a solid understanding of users’ perceptions towards BDA.

Aim/Purpose: This study analyzes health professionals’ information security behavior (ISB) as health information system (HIS) users concerning associated information security controls and risks established in a public hospital. This work measures ISB using a complete measuring scale and explains the relevant influential factors from the perspectives of Protection Motivation Theory (PMT) and General Deterrence Theory (GDT) Background: Internal users are the primary source of security concerns in hospitals, with malware and social engineering becoming common attack vectors in the health industry. This study focuses on HIS user behavior in developing countries with limited information security policies and resources. Methodology: The research was carried out in three stages. First, a semi-structured interview was conducted with three hospital administrators in charge of HIS implementation to investigate information security controls and threats. Second, a survey of 144 HIS users to determine ISB based on hospital security risk. Third, a semi-structured interview was conducted with 11 HIS users to discuss the elements influencing behavior and current information security implementation. Contribution: This study contributes to ISB practices in hospitals. It discusses how HIS managers could build information security programs to enhance health professionals’ behavior by considering PMT and GDT elements. Findings: According to the findings of this study, the hospital has implemented particular information security management system (ISMS) controls based on international standards, but there is still room for improvement. Insiders are the most prevalent information security dangers discovered, with certain working practices requiring HIS users to disclose passwords with others. The top three most common ISBs HIS users practice include appropriately disposing of printouts, validating link sources, and using a password to unlock the device. Meanwhile, the top three least commonly seen ISBs include transferring sensitive information online, leaving a password in an unsupervised area, and revealing sensitive information via social media. Recommendations for Practitioners: Hospital managers should create work practices that align with information security requirements. HIS managers should provide incentives to improve workers’ perceptions of the benefit of robust information security measures. Recommendation for Researchers: This study suggests more research into the components that influence ISB utilizing diverse theoretical foundations such as Regulatory Focus Theory to compare preventive and promotion motivation to enhance ISB. Impact on Society: This study can potentially improve information security in the healthcare industry, which has substantial risks to human life but still lags behind other vital sector implementations. Future Research: Future research could look into the best content and format for an information security education and training program to promote the behaviors of healthcare professionals that need to be improved based on this ISB measurement and other influential factors.

Aim/Purpose: This study aims to evaluate the success of ERP post-implementation and the factors that affect the overall success of the ERP system by integrating the Task Technology Fit (TTF) model into the Information System Success Model (ISSM). Background: Not all ERP implementations provide the expected benefits, as post-implementation challenges can include inflexible ERP systems and ongoing costs. Therefore, it is necessary to evaluate the success after ERP implementation, and this research integrates the Task Technology Fit (TTF) model into the Information System Success Model (ISSM). Methodology: For data analysis and the proposed model, the authors used SmartPLS 3 by applying the PLS-SEM test and one-tailed bootstrapping. The researchers distributed questionnaires online to 115 ERP users at a construction company in Indonesia and successfully got responses from 95 ERP users. Contribution: The results obtained will be helpful and essential for future researchers and Information System practitioners – considering the high failure rate in the use of ERP in a company, as well as the inability of organizations and companies to exploit the benefits and potential that ERP can provide fully. Findings: The results show that Perceived Usefulness, User Satisfaction, and Task-Technology Fit positively affect the Organizational Impact of ERP implementation. Recommendations for Practitioners: The findings can help policymakers and CEOs of businesses in Indonesia’s construction sector create better business strategies and use limited resources more effectively and efficiently to provide a considerably higher probability of ERP deployment. The findings of this study were also beneficial for ERP vendors and consultants. The construction of the industry has specific characteristics that ERP vendors should consider. Construction is a highly fragmented sector, with specialized segments demanding specialist technologies. Several projects also influence it. They can use them to identify and establish several alternative strategies to deal with challenges and obstacles that can arise during the installation of ERP in a firm. Vendors and consultants can supply solutions, architecture, or customization support by the standard operating criteria, implement the ERP system and train critical users. The ERP system vendors and consultants can also collaborate with experts from the construction sector to develop customized alternatives for construction companies. That would be the most outstanding solution for implementing ERP in this industry. Recommendation for Researchers: Future researchers can use this combined model to study ERP post-implementation success on organizational impact with ERP systems in other company information systems fields, especially the construction sector. Future integration of different models can be used to improve the proposed model. Integration with models that assess the level of Information System acceptance, such as Technology Acceptance Model 3 (TAM3) or Unified Theory of Acceptance and Use of Technology 2 (UTAUT2), can be used in future research to deepen the exploration of factors that influence ERP post-implementation success in an organization. Impact on Society: This study can guide companies, particularly in the construction sector, to maintain ERP performance, conduct training for new users, and regularly survey user satisfaction to ensure the ERP system’s reliability, security, and performance are maintained and measurable. Future Research: It is increasing the sample size with a larger population at other loci (private and state-owned) that use ERP to see the factors influencing ERP post-implementation success and using mixed methods to produce a better understanding. With varied modes, it is possible to get better results by adding unique factors to the research, and future integration of other models can be used to improve the proposed model.

Aim/Purpose: This study aims to devise a personalized solution for online healthcare platforms that can alleviate problems arising from information overload and data sparsity by providing personalized healthcare services to patients. The primary focus of this paper is to develop an effective medicine recommendation approach for recommending suitable medications to patients based on their specific medical conditions. Background: With a growing number of people becoming more conscious about their health, there has been a notable increase in the use of online healthcare platforms and e-services as a means of diagnosis. As the internet continues to evolve, these platforms and e-services are expected to play an even more significant role in the future of healthcare. For instance, WebMD and similar platforms offer valuable tools and information to help manage patients’ health, such as searching for medicines based on their medical conditions. Nonetheless, patients often find it arduous and time-consuming to sort through all the available medications to find the ones that match their specific medical conditions. To address this problem, personalized recommender systems have emerged as a practical solution for mitigating the burden of information overload and data sparsity-related issues that are frequently encountered on online healthcare platforms. Methodology: The study utilized a dataset of MC ratings obtained from WebMD, a popular healthcare website. Patients on this website can rate medications based on three criteria, including medication effectiveness, ease of use, and satisfaction, using a scale of 1 to 5. The WebMD MC rating dataset used in this study contains a total of 32,054 ratings provided by 2,136 patients for 845 different medicines. The proposed HSMCCF approach consists of two primary modules: a semantic filtering module and a multi-criteria filtering module. The semantic filtering module is designed to address the issues of data sparsity and new item problems by utilizing a medicine taxonomy that sorts medicines according to medical conditions and makes use of semantic relationships between them. This module identifies the medicines that are most likely to be relevant to patients based on their current medical conditions. The multi-criteria filtering module, on the other hand, enhances the approach’s ability to capture the complexity of patient preferences by considering multiple criteria and preferences through a unique similarity metric that incorporates both distance and structural similarities. This module ensures that patients receive more accurate and personalized medication recommendations. Moreover, a medicine reputation score is employed to ensure that the approach remains effective even when dealing with limited ratings or new items. Overall, the combination of these modules makes the proposed approach more robust and effective in providing personalized medicine recommendations for patients. Contribution: This study addresses the medicine recommendation problem by proposing a novel approach called Hybrid Semantic-based Multi-Criteria Collaborative Filtering (HSMCCF). This approach effectively recommends medications for patients based on their medical conditions and is specifically designed to overcome issues related to data sparsity and new item recommendations that are commonly encountered on online healthcare platforms. The proposed approach addresses data sparsity and new item issues by incorporating a semantic filtering module and a multi-criteria filtering module. The semantic filtering module sorts medicines based on medical conditions and uses semantic relationships to identify relevant ones. The multi-criteria filtering module accurately captures patient preferences and provides precise recommendations using a novel similarity metric. Additionally, a medicine reputation score is also employed to further expand potential neighbors, improving predictive accuracy and coverage, particularly in sparse datasets or new items with few ratings. With the HSMCCF approach, patients can receive more personalized recommendations that are tailored to their unique medical needs and conditions. By leveraging a combination of semantic-based and multi-criteria filtering techniques, the proposed approach can effectively address the challenges associated with medicine recommendations on online healthcare platforms. Findings: The proposed HSMCCF approach demonstrated superior effectiveness compared to benchmark recommendation methods in multi-criteria rating datasets in terms of enhancing both prediction accuracy and coverage while effectively addressing data sparsity and new item challenges. Recommendations for Practitioners: By applying the proposed medicine recommendation approach, practitioners can develop a medicine recommendation system that can be integrated into online healthcare platforms. Patients can then utilize this system to make better-informed decisions regarding the medications that are most suitable for their specific medical conditions. This personalized approach to medication recommendations can ultimately lead to improved patient satisfaction. Recommendation for Researchers: Integrating patient medicine reviews is a promising way for researchers to elevate the proposed medicine recommendation approach. By leveraging patient reviews, the approach can gain a more comprehensive understanding of how certain medications perform for specific medical conditions. Additionally, exploring the relationship between MC-based ratings using an improved aggregation function can potentially enhance the accuracy of medication predictions. This involves analyzing the relationship between different criteria, such as medication effectiveness, ease of use, and satisfaction of the patients, and determining the optimal weighting for each criterion based on patient feedback. A more holistic approach that incorporates patient reviews and an improved aggregation function can enable the proposed medicine recommendation approach to provide more personalized and accurate recommendations to patients. Impact on Society: To mitigate the risk of infection during the COVID-19 pandemic, the promotion of online healthcare services was actively encouraged. This allowed patients to continue accessing care and receiving treatment while adhering to physical distancing guidelines and shielding measures where necessary. As a result, the implementation of personalized healthcare services for patients is expected to be a major disruptive force in healthcare in the coming years. This study proposes a personalized medicine recommendation approach that can effectively address this issue and aid patients in making informed decisions about the medications that are most suitable for their specific medical conditions. Future Research: One way that may enhance the proposed medicine recommendation approach is to incorporate patient medicine reviews. Furthermore, the analysis of MC-based ratings using an improved aggregation function can also potentially enhance the accuracy of medication predictions.

Aim/Purpose: Based on the stimulus-organism-response (SOR) model, the current study investigated social commerce functions as an innovative retailing technological support by selecting the three most appropriate features for the Chinese online shopping environment with respective value co-creation intentions. Background: Social commerce is the customers’ online shopping touchpoint in the latest retail era, which serves as a corporate technological tool to extend specific customer services. Although social commerce is a relatively novel platform, limited theoretical attention was provided to determine retailers’ approaches in employing relevant functions to improve consumer experience and value co-creation. Methodology: A questionnaire was distributed to Chinese customers, with 408 valid questionnaires being returned and analyzed through Structural Equation Modeling (SEM). Contribution: The current study investigated the new retail concept and value co-creation from the consumer’s perspective by developing a theoretical model encompassing new retail traits and consumer value, which contributed to an alternative theoretical understanding of value creation, marketing, and consumer behaviour in the new retail business model. Findings: The results demonstrated that value co-creation intention was determined by customer experience, hedonic experience, and trust. Simultaneously, the three factors were significantly influenced by interactivity, personalisation, and sociability features. Specifically, customers’ perceptions of the new retail idea and the consumer co-creation value were examined. Resultantly, this study constructed a model bridging new retail characteristics with consumer value. Recommendations for Practitioners: Nonetheless, past new retail management practice studies mainly focused on superficial happiness in the process of human-computer interaction, which engendered a computer system design solely satisfying consumers’ sensory stimulation and experience while neglecting consumers’ hidden value demands. As such, a shift from the subjective perspective to the realisation perspective is required to express and further understand the actual meaning and depth of consumer happiness. Recommendation for Researchers: New retailers could incorporate social characteristics on social commerce platforms to improve the effectiveness of marketing strategies while increasing user trust to generate higher profitability. Impact on Society: The new retail enterprises should prioritise consumers’ acquisition of happiness meaning and deep experience through self-realisation, cognitive improvement, identity identification, and other aspects of consumer experiences and purchase processes. By accurately revealing and matching consumers’ fundamental perspectives, new retailers could continuously satisfy consumer requirements in optimally obtaining happiness. Future Research: Future comparative studies could be conducted on diverse companies within the same industry for comprehensive findings. Moreover, other underlying factors with significant influences, such as social convenience, group cognitive ability, individual family environment, and other external stimuli were not included in the present study examinations.

Aim/Purpose: The major challenges for firms to initiate corporate social responsibility (CSR) arise from resource constraints, complexity, and uncertainty. Consuming considerable financial and human resources is the main difficulty for smaller firms or those operating in less profitable industries, and the lack of immediate outputs from CSR initiatives poses a challenge for firms in prioritizing and assessing their effectiveness. Background: To better integrate CSR management into overall business strategy and decision-making processes, Blockchain technology (BCT) could potentially offer a feasible and optimal alternative to CSR reports. Methodology: This study uses the fixed effects regression by way of the Least Squares Dummy Variable (LSDV) approach in STATA to analyze the direct effect of CSR management on business performance and the moderating effect of BCT adoption on this relationship with a panel data set of 5810 observations collected from the 874 listed companies in 2015 in Taiwan Stock Exchange through 2021. Contribution: This study contributes to the literature by shedding light on the organizational factors that influence BCT adoption. Findings: The findings show that firms with high levels of CSR management have better business performance. Additionally, the adoption of BCT strengthens the positive relationship between CSR management and business performance, but it cannot replace the fundamental principles of CSR. Finally, firm size does not significantly affect BCT adoption, indicating that companies of all sizes have an equal opportunity to adopt BCT, which can help to level the playing field in terms of resources available to different firms. Recommendations for Practitioners: This study suggests that firms managing CSR practices have better business performance, and the adoption of BCTs further enhances this positive relationship. However, BCT adoption does not have the same positive effect on business performance as CSR practices. Additionally, this research can help to inform public policy related to BCT adoption and diffusion. Recommendation for Researchers: By exploring the factors that influence BCT adoption, future researchers can provide insights into the key challenges and opportunities faced by organizations of different sizes and help to develop strategies for promoting the effective adoption of BCT. Impact on Society: Given the limitations of current CSR reporting, the understanding gained from BCT applications can provide companies with an alternative mechanism to foster progress in CSR implementation. Future Research: Firstly, while the fixed-effects model might have dampened the power of explanation because it only captures within-unit variation and ignores between-unit variation, the explanatory power is further limited due to only integrating two independent variables in this model. Because of limited data availability, this study only utilizes CSR_Report and firm_size as independent variables. Future studies can consider more key factors and may lead to different results. Additionally, panel data is collected from Taiwan and, therefore, may not be representative of the broader population. Future researchers integrating the Stock Exchange of different countries are recommended.

Aim/Purpose: This study investigates the relationship between dual network embedding, dual entrepreneurial bricolage, and knowledge-creation performance. Background: The importance of new ventures for innovation and economic growth has been fully endorsed. Establishing incubation organizations to help new startups overcome constraints and dilemmas has become the consensus of various countries. In particular, the number of Chinese makerspaces has rapidly increased. Startups in the makerspaces form a loosely coupled dual network to cooperate and share resources, especially knowledge. Methodology: By convenience sampling, 400 startups in the makerspaces in Fujian Province, China were selected for the questionnaire survey study. In total, 307 valid responses were collected, yielding a response rate of 76.8%. The survey data were analyzed for hypothesis testing, using the PL-SEM technique with the AMOS20.0 software. Contribution: At the theoretical level, this research supplements the exploration of the influencing factors of the entrepreneurial bricolage of startups at the network level. It deepens the research on the internal mechanism of the dual network embeddedness affecting the knowledge-creation performance. In practice, it provides a theoretical basis and management inspiration for startups in makerspaces to overcome the inherent disadvantage of being too small and weak to explore innovative paths. Findings: First, relational embedding of startups in makerspaces directly affects knowledge-creation performance. Second, dual entrepreneurial bricolage plays a mediating role in diversity. Selective entrepreneurial bricolage plays a partial mediating role between relationship embedding and knowledge-creation performance. Parallel entrepreneurial bricolage plays a complete intermediary role between structural embedding and knowledge-creation performance. Dual entrepreneurial bricolage plays a complete intermediary role between knowledge embedding and knowledge-creation performance. Recommendations for Practitioners: Enterprises in the makerspaces should make dynamic adjustments to the network embedded state and dual entrepreneurial bricolage to improve knowledge-creation performance. When startups conduct selective entrepreneurship bricolage, they should strengthen relational and knowledge embeddedness to improve their relationship strength and tacit knowledge acquisition. When startups conduct parallel entrepreneurship bricolage, structural and knowledge embedding should be strengthened to improve the position of enterprises in the network to acquire diversified knowledge to explore and discover new business opportunities and project resources. Recommendation for Researchers: The heterogeneity of industries and regions may impact the dual network embedding mechanism of startups. Researchers can choose a wider range of regions and industries for sampling. Impact on Society: This study provides a theoretical basis and management inspiration for startups to overcome the inherent disadvantage of being too small and weak to explore innovative paths. It provides a basis to support startups in unleashing innovation vitality and achieving healthy growth. Future Research: Previous studies have shown that network relationships and bricolage behavior have a certain relationship with the enterprise life cycle. Future research can adopt a longitudinal research design across time points, which will increase the explanatory power of research conclusions.

Aim/Purpose: The primary purpose of this study is to investigate the factors that impact the behavioral intention to use social media (SM) for knowledge sharing (KS) in the disaster relief (DR) context. Background: With the continuing growth of SM for KS in the DR environment, disaster relief organizations across the globe have started to realize its importance in streamlining their processes in the post-implementation phase. However, SM-based KS depends on the willingness of members to share their knowledge with others, which is affected by several technological, social, and organizational factors. Methodology: A survey was conducted in Somalia to gather primary data from DR practitioners, using purposive sampling as the technique. The survey collected 214 valid responses, which were then analyzed with the PLS-SEM approach. Contribution: The study contributes to an understanding of the real-life hurdles faced by disaster relief organizations by expanding on the C-TAM-TPB model with the inclusion of top management support, organizational rewards, enjoyment in helping others, knowledge self-efficacy, and interpersonal trust factors. Additionally, it provides useful recommendations to managers of disaster relief organizations on the key factors to consider. Findings: The findings recorded that perceived usefulness, ease of use, top management support, enjoyment in helping others, knowledge self-efficacy, and interpersonal trust were critical factors in determining behavioral intention (BI) to use SM-based KS in the DR context. Furthermore, the mediator variables were attitude, subjective norms, and perceived behavioral control. Recommendations for Practitioners: Based on the research findings, it was determined that management should create different discussion forums among the disaster relief teams to ensure the long-term use of SM-based KS within DR organizations. They should also become involved in the discussions for disaster-related knowledge such as food supplies, shelter, or medical relief that disaster victims need. Disaster relief managers should consider effective and adequate training to enhance individual knowledge and self-efficacy since a lack of training may increase barriers and difficulties in using SM for KS during a DR process. Recommendation for Researchers: The conceptual model, further empirically investigated, can be employed by other developing countries in fostering acceptance of SM for KS during disaster relief operations. Impact on Society: Disaster relief operations can be facilitated using social media by considering the challenges DR practitioners face during emergencies. Future Research: In generalizing this study’s findings, other national or global disaster relief organizations should consider, when applying and testing, the research instruments and proposed model. The researchers may extend this study by collecting data from managers or administrators since they are different types of users of the SM-based KS system.

Aim/Purpose: This paper aims to empirically quantify the financial distress caused by the COVID-19 pandemic on companies listed on Amman Stock Exchange (ASE). The paper also aims to identify the most important predictors of financial distress pre- and mid-pandemic. Background: The COVID-19 pandemic has had a huge toll, not only on human lives but also on many businesses. This provided the impetus to assess the impact of the pandemic on the financial status of Jordanian companies. Methodology: The initial sample comprised 165 companies, which was cleansed and reduced to 84 companies as per data availability. Financial data pertaining to the 84 companies were collected over a two-year period, 2019 and 2020, to empirically quantify the impact of the pandemic on companies in the dataset. Two approaches were employed. The first approach involved using Multiple Discriminant Analysis (MDA) based on Altman’s (1968) model to obtain the Z-score of each company over the investigation period. The second approach involved developing models using Artificial Neural Networks (ANNs) with 15 standard financial ratios to find out the most important variables in predicting financial distress and create an accurate Financial Distress Prediction (FDP) model. Contribution: This research contributes by providing a better understanding of how financial distress predictors perform during dynamic and risky times. The research confirmed that in spite of the negative impact of COVID-19 on the financial health of companies, the main predictors of financial distress remained relatively steadfast. This indicates that standard financial distress predictors can be regarded as being impervious to extraneous financial and/or health calamities. Findings: Results using MDA indicated that more than 63% of companies in the dataset have a lower Z-score in 2020 when compared to 2019. There was also an 8% increase in distressed companies in 2020, and around 6% of companies came to be no longer healthy. As for the models built using ANNs, results show that the most important variable in predicting financial distress is the Return on Capital. The predictive accuracy for the 2019 and 2020 models measured using the area under the Receiver Operating Characteristic (ROC) graph was 87.5% and 97.6%, respectively. Recommendations for Practitioners: Decision makers and top management are encouraged to focus on the identified highly liquid ratios to make thoughtful decisions and initiate preemptive actions to avoid organizational failure. Recommendation for Researchers: This research can be considered a stepping stone to investigating the impact of COVID-19 on the financial status of companies. Researchers are recommended to replicate the methods used in this research across various business sectors to understand the financial dynamics of companies during uncertain times. Impact on Society: Stakeholders in Jordanian-listed companies should concentrate on the list of most important predictors of financial distress as presented in this study. Future Research: Future research may focus on expanding the scope of this study by including other geographical locations to check for the generalisability of the results. Future research may also include post-COVID-19 data to check for changes in results.

Aim/Purpose: The use of digital technology, such as an electronic records management system (ERMS), has prompted widespread changes across organizations. The organization needs to support its operations with an automation system to improve production performance. This study investigates ERMS’s potentiality to enhance organizational performance in the oil and gas industry. Background: Oil and gas organizations generate enormous electronic records that lead to difficulties in managing them without any system or digitalization procedure. The need to use a system to manage big data and records affects information security and creates several problems. This study supports decision-makers in oil and gas organizations to use ERMS to enhance organizational performance. Methodology: We used a quantitative method by integrating the typical partial least squares (SEM-PLS) approach, including measurement items, respondents’ demographics, sampling and collection of data, and data analysis. The SEM-PLS approach uses a measurement and structural model assessment to analyze data. Contribution: This study contributes significantly to theory and practice by providing advancements in identity theory in the context of big data management and electronic records management. This study is a foundation for further research on the role of ERMS in operations performance and Big Data Management (BDM). This research makes a theoretical contribution by studying a theory-driven framework that may serve as an essential lens to evaluate the role of ERMS in performance and increase its potentiality in the future. This research also evaluated the combined impacts of general technology acceptance theory elements and identity theory in the context of ERMS to support data management. Findings: This study provides an empirically tested model that helps organizations to adopt ERMS based on the influence of big data management. The current study’s findings looked at the concerns of oil and gas organizations about integrating new technologies to support organizational performance. The results demonstrated that individual characteristics of users in oil and gas organizations, in conjunction with administrative features, are robust predictors of ERMS. The results show that ERMS potentiality significantly influences the organizational performance of oil and gas organizations. The research results fit the big ideas about how big data management and ERMS affect respondents to adopt new technologies. Recommendations for Practitioners: This study contributes significantly to the theory and practice of ERMS potentiality and BDM by developing and validating a new framework for adopting ERMS to support the performance and production of oil and gas organizations. The current study adds a new framework to identity theory in the context of ERMS and BDM. It increases the perceived benefits of using ERMS in protecting the credibility and authenticity of electronic records in oil and gas organizations. Recommendation for Researchers: This study serves as a foundation for future research into the function and influence of big data management on ERMS that support the organizational performance. Researchers can examine the framework of this study in other nations in the future, and they will be able to analyze this research framework to compare various results in other countries and expand ERMS generalizability and efficacy. Impact on Society: ERMS and its impact on BDM is still a developing field, and readers of this article can assist in gaining a better understanding of the literature’s dissemination of ERMS adoption in the oil and gas industry. This study presents an experimentally validated model of ERMS adoption with the effect of BDM in the oil and gas industry. Future Research: In the future, researchers may be able to examine the impact of BDM and user technology fit as critical factors in adopting ERMS by using different theories or locations. Furthermore, researchers may include the moderating impact of demographical parameters such as age, gender, wealth, and experience into this study model to make it even more robust and comprehensive. In addition, future research may examine the significant direct correlations between human traits, organizational features, and individual perceptions of BDM that are directly related to ERMS potentiality and operational performance in the future.

Aim/Purpose: Social commerce is an emergent topic widely used for product and service sourcing. It helps companies to have frequent interaction with their customers and strive to achieve a competitive advantage. Yet there is only little empirical evidence focusing on social commerce and its adoption in SMEs to date. This study investigates the key factors affecting social commerce adoption in SMEs. This research designed a theoretical model using the Technology, Organization, and Environment (TOE) Model Background: Despite its rapid growth and usage, social commerce is still in its evolution phase and its current conception is vague and restricted. Therefore, considering the benefits of social commerce for consumers and businesses, it is important to explore the concept of social commerce. Methodology: The research floated a self-administered questionnaire and surveyed 218 Jordanian SME businesses. The data was analyzed using smart PLS and the results were drawn that covers the detail of the characteristics of respondents, study descriptive, results of regressions assumptions, e.g., data normality, reliability, validity, common method biases, and description of the measurement model, followed by the findings of hypothesis analysis. Contribution: This study has many significant contributions to the existing studies on firms’ adoption of social commerce. It indicates that organizational readiness from the organizational perspective and consumer pressure from the environmental dimension of the TOE model are significant influential elements in the adoption of social commerce in business, followed by high-level management support and trading partner pressure, respectively. This shows that organizational readiness to adopt social commerce and consumer pressure has a vital role in Jordanian SMEs’ adopting social commerce. Findings: The results were drawn from a survey of 218 Jordanian SMEs, indicating that organizational readiness from an organizational dimension and consumer pressure environmental perspective, followed by top management’s support and trading partner pressure, significantly predicts the adoption intentions of social commerce. However, perceived usefulness and security concerns from a technological context do not significantly impact behavioral intentions to utilize social commerce. Recommendations for Practitioners: Lack of awareness about new technology and its potential benefits are not well diffused in the Jordanian context. In short, both organizational and environmental dimensions of the TOE framework significantly influence the behavioral intentions for social commerce adoption in the Jordanian context whereas the third-dimension technological factors do not affect the behavioral intentions of SMEs to adopt social commerce. In the technological context, SMEs need to invest in technology and must spread awareness among Jordanian consumers about the potential benefits of technology and must encourage them to use social commerce platforms to interact because of the high significance of social commerce for businesses as it facilitates the quick completion of tasks, enhances the productivity, and improves the chances of high profitability. Recommendation for Researchers: First, the study is limited in scope as it discusses the direct links between the TOE framework, behavioral intentions to use social commerce, and the actual usage of social commerce in the Jordanian context rather than testing the mediation, and moderation. Future research may examine the mediators and moderators in the conceptual model. Second, the research examined the behavioral intentions of SMEs rather than consumers to adopt social commerce. Further research might consider the consumer perspective on social commerce. Impact on Society: This research aims to identify the key factor that impact the behavioral intentions of SME businesses to practice social commerce. The theoretical underpinning of the study lies in the TOE model, as using its basic assumptions the conceptual grounds and hypothesis of the study are developed. Future Research: The study findings are not generalizable in different contexts as it was specifically conducted by gathering data from the Jordanian population. However future studies may consider different contexts, sectors, cultures, or countries to examine the model. Lastly, the research collected data using convenience sampling from 218 SMEs in Jordan, which may create difficulty in the generalizability of the research, so needs to examine a larger sample in future studies.

Aim/Purpose: This study aims to examine the ten factors from the Technology Acceptance Model (TAM), Theory of Planned Behavior (TPB), and Unified Theory of Acceptance and Use of Technology (UTAUT) theories in order to analyze behavioral intentions to use the Indonesian online capital market investment platforms and the effect of behavioral intentions on actual usage. Background: The potential growth of capital market investors in Indonesia is large, and the low use of the Internet for investment purposes makes it necessary for stakeholders to understand the factors that affect people’s intentions to invest, especially through online platforms. Several previous studies have explained the intention to use online investment platforms using the TAM and TPB theories. This study tries to combine TAM, TPB, and UTAUT theories in analyzing behavioral intentions to use an online capital market investment platform in Indonesia. Methodology: The research approach employed is a mixed method, particularly explanatory research, which employs quantitative methods first, followed by qualitative methods. Data were collected by conducting interviews and sending online surveys. This study was successful in collecting information on the users of online capital market investment platforms in Indonesia from 1074 respondents, which was then processed and analyzed using Covariance-Based Structural Equation Modeling (CB-SEM) with the IBM AMOS 26.0 application. Contribution: This study complements earlier theories like TAM, TPB, and UTAUT by looking at the intention to use online capital market investment platforms from technological, human, and environmental viewpoints. This study looks at the intention to use the online capital market investing platform as a whole rather than separately depending on investment instruments. This study also assists practitioners including regulators, the government, developers, and investors by offering knowledge of the phenomena and factors that can increase the capital market’s investment intention in Indonesia. Findings: Attitudes, perceived ease of use, perceived behavioral control, subjective norm, and national pride were found to be significant predictors of the intention to use online investment platforms in Indonesia, whereas perceived usefulness, perceived risk, perceived trust, perceived privacy, and price value were not. Recommendations for Practitioners: All practitioners must be able to take steps and strategies that focus on factors that have a significant impact on increasing usage intentions. The government can enact legislation that emphasizes the simplicity and convenience of investment, as well as launch campaigns that encourage people to participate in economic recovery by investing in the capital market. Meanwhile, the developers are concentrating on facilitating the flow of investment transactions through the platform, increasing education and awareness of the benefits of investing in the capital market, and providing content that raises awareness that investing in the capital market can help to restore the national economy. Recommendation for Researchers: Further research is intended to include other variables such as perceived benefits and perceived security, as well as other frameworks such as TRA, to better explain individuals’ behavioral intentions to use online capital investment platforms. Impact on Society: This study can help all stakeholders understand what factors can increase Indonesians’ interest in investing in the capital market, particularly through online investment platforms. This understanding is expected to increase the number of capital market participants and, as a result, have an impact on economic recovery following the COVID-19 pandemic. Future Research: Future research is expected to investigate additional factors that can influence individuals’ behavioral intention to use an online capital market investment platform, such as perceived benefits and perceived security, as well as the addition of control variables such as age, gender, education, and income. International research across nations is also required to build a larger sample size in order to examine the behavior of investors in developing and developed countries and acquire a more thorough understanding of the online capital market investment platform.

Aim/Purpose: This study investigates the factors that affect the repurchase intentions of Generation Z consumers in India’s online shopping industry, focusing on combining the Expectation-Confirmation Model (ECM) and Extended Technology Acceptance Model (E-TAM). The aim is to understand the intricate behaviors that shape technology adoption and sustained usage, which are essential for retaining customers in e-commerce. Background: Social media and other online platforms have significantly influenced daily life and become essential communication tools owing to technological advancements. Online shopping is no exception, offering a range of product choices, information, and convenience compared with traditional commerce. Indian retailers recognize this trend as an opportunity to promote their brands through e-shopping platforms, leading to increased competition. Generation Z comprises 32% of the world’s population and is a significant emerging customer base in India. Numerous studies have been conducted to study customers’ repurchase intention in the online shopping domain, but few studies have explicitly focused on Generation Z as a customer base. This study aims to comprehensively understand the topic and investigate the variables that impact consumers’ online repurchase intention by examining their post-adoption behavioral processes. Methodology: The study employed a quantitative research design with structural equation modeling using AMOS to analyze responses from 410 participants. This method thoroughly examined hypotheses regarding factors affecting repurchase intention (security, ease of use, privacy, and internet self-efficacy) and the mediating role of e-satisfaction. Contribution: This study makes a unique contribution to the field of e-commerce by focusing on Generation Z in India, a rapidly growing demographic in the e-commerce industry. The results on the mediating role of e-satisfaction have significant implications for e-retailers seeking to enhance customer retention strategies and gain a competitive edge in the market. Findings: The research findings underscore the significant influence of security, ease of use, and internet self-efficacy on repurchase intentions, with e-satisfaction playing a pivotal role as a mediating factor. Notably, while privacy concerns did not directly impact repurchase intentions, they displayed considerable influence when mediated by e-satisfaction, highlighting the intricate interplay between these variables in the context of online shopping, which is the unique finding of this study. Recommendations for Practitioners: This study has several significant implications for practitioners. Effectively addressing computer-related individual differences, such as computer self-efficacy, is crucial for boosting online customers’ repurchase intention. For instance, if an e-retailer intends to target Generation Z customers, they should collaborate with IT professionals and develop various computer literacy programs on online streaming platforms, such as YouTube. These programs will enhance target customers’ confidence in online shopping portals and increase their online repeat purchases. Additionally, practitioners should strive to improve the online shopping experience by making the portal user-friendly. Generation Z is accustomed to a fast Internet experience, so they prefer that the process of completing online transactions is swift with fewer clicks. The search for products, payments, and redress should not be tedious. Furthermore, the primary objective of the e-retailer should be to satisfy customers, as satisfied customers repeat their purchases and increase overall profitability. Recommendation for Researchers: The current study was conducted in the Delhi-NCR region of India, and its findings could serve as a basis for future research. For instance, the scale devised in this study could be utilized to examine the impact of cash-on-delivery as a payment method on purchase intention across the country. Alternatively, a comparative analysis could be conducted to compare cash-on-delivery effects in various countries. Impact on Society: The study’s findings enable stakeholders in the online shopping industry to comprehend the post-adoption behavior of Generation Z users and augment existing literature by establishing a correlation between determinants that impact repurchase intention and e-satisfaction, which serves as a mediator. Future Research: This study examines the factors that impact the propensity of Generation Z shoppers to engage in repeat online purchases. This study focuses on India, where the Generation Y (millennial) customer base is also substantial within the online shopping market. Future research could compare the shopping habits of Generation Z and Generation Y customers, as the latter may place greater importance on privacy and security. Additional studies could broaden the scope of this research and explore the comparative viewpoints of both generations. Also, it would be advantageous to conduct in-depth interviews and longitudinal studies to acquire a more in-depth comprehension of the evolving digitalization of shopping.

Aim/Purpose: This study presents a novel deep learning-based framework designed to enhance spontaneous micro-expression recognition by effectively increasing the amount and variety of data and balancing the class distribution to improve recognition accuracy. Background: Micro-expression recognition using deep learning requires large amounts of data. Micro-expression datasets are relatively small, and their class distribution is not balanced. Methodology: This study developed a framework using a deep learning-based model to recognize spontaneous micro-expressions on a person’s face. The framework also includes several technical stages, including image and data preprocessing. In data preprocessing, data augmentation is carried out to increase the amount and variety of data and class balancing to balance the distribution of sample classes in the dataset. Contribution: This study’s essential contribution lies in enhancing the accuracy of micro-expression recognition and overcoming the limited amount of data and imbalanced class distribution that typically leads to overfitting. Findings: The results indicate that the proposed framework, with its data preprocessing stages and deep learning model, significantly increases the accuracy of micro-expression recognition by overcoming dataset limitations and producing a balanced class distribution. This leads to improved micro-expression recognition accuracy using deep learning techniques. Recommendations for Practitioners: Practitioners can utilize the model produced by the proposed framework, which was developed to recognize spontaneous micro-expressions on a person’s face, by implementing it as an emotional analysis application based on facial micro-expressions. Recommendation for Researchers: Researchers involved in the development of a spontaneous micro-expression recognition framework for analyzing hidden emotions from a person’s face are playing an essential role in advancing this field and continue to search for more innovative deep learning-based solutions that continue to explore techniques to increase the amount and variety of data and find solutions to balancing the number of sample classes in various micro-expression datasets. They can further improvise to develop deep learning model architectures that are more suitable and relevant according to the needs of recognition tasks and the various characteristics of different datasets. Impact on Society: The proposed framework could significantly impact society by providing a reliable model for recognizing spontaneous micro-expressions in real-world applications, ranging from security systems and criminal investigations to healthcare and emotional analysis. Future Research: Developing a spontaneous micro-expression recognition framework based on spatial and temporal flow requires the learning model to classify optimal features. Our future work will focus more on exploring micro-expression features by developing various alternative learning models and increasing the weights of spatial and temporal features.

Aim/Purpose: The last decade has witnessed a tremendous progression in mobile penetration across the world and, most importantly, in developing countries like India. This research aims to investigate and analyze the factors influencing the adoption of mobile payments (M-payments) in the Indian rural population. This, in turn, would bring about positive changes in the lives of people in these countries. Background: A conceptual framework was worked upon using UTAUT as a foundation, which included constructs, namely, facilitating conditions, social influences, performance expectancy, and effort expectancy. The model was further extended by incorporating the awareness construct of m-payments to make it more comprehensive and to understand behavioral intentions and usage behavior for m-payments in rural India. Methodology: A questionnaire-based study was conducted to collect primary data from 410 respondents residing in rural areas in the state of Punjab. Convenience sampling was conducted to collect the data. Structural equation modeling was used to conduct statistical analysis, including exploratory and confirmatory factor analyses. Contribution: A new conceptual model for M-payments adoption in rural India was developed based on the study’s findings. Using the findings of the study, marketers, policymakers, and academicians can gain insight into the factors that motivate the rural population to use M-payments. Findings: The study has found that M-payment Awareness (AW) is the strongest factor within the proposed model for deeper diffusion of M-payments in rural areas in the state of Punjab. Performance expectancy (PE), effort expectancy (EE), social influences (SI), and facilitating conditions (FC) are also positively and significantly related to behavioral intentions for using M-payments among the Indian rural population in the state of Punjab. Recommendations for Practitioners: M-payments are emerging as a new mode of transactions among the Indian masses. The government needs to play a pivotal role in advocating the benefits linked with the usage of M-payments by planning financial literacy and awareness campaigns, promoting transparency and accountability of the intermediaries, and reducing transaction costs of using M-payments. Mobile manufacturing companies should come up with devices that are easy to use and incorporate multilanguage mobile applications, especially for rural areas, as India is a multi-lingual country. A robust regulatory framework will not only shape consumer trust but also prevent privacy breaches. Recommendation for Researchers: It is recommended that a comparative study among different M-payment platforms be conducted by exploring constructs such as usefulness and ease of use. However, the vulnerability of data leakage may result in insecurity and skepticism about its adoption. Impact on Society: India’s rural areas have immense potential for adoption of M-payments. Appropriate policies, awareness drives, and necessary infrastructure will boost faster and smoother adoption of M-payments in rural India to thrive in the digital economy. Future Research: The adapted model can be further tested with moderating factors like age, gender, occupation, and education to understand better the complexities of M-payments, especially in rural areas of India. Additionally, cross-sectional studies could be conducted to evaluate the behavioral intentions of different sections of society.

Aim/Purpose: This study investigates the intention to invest in online peer-to-peer (P2P) lending platforms among the bottom 40% (B40) Malaysian households by income. Background: The B40 group citizens earn less than USD 1,096.00 (i.e., RM 4,850.00) in monthly household income, thereby possessing relatively small capital investments suitable for online P2P lending. Methodology: Drawing on the technology acceptance model (TAM), this research developed and tested the relevant hypotheses with data collected from 216 respondents. The partial least square structural equation modelling (PLS-SEM) technique was employed to analyse the collected data. Contribution: This study contributes to the body of knowledge on financial inclusion by demonstrating the relevance of modified TAM in explaining the intention to invest in online P2P lending platforms among investors with lower disposable income (i.e., the B40 group in Malaysia). Findings: The findings revealed that information quality, perceived risk, and perceived ease of use are relevant to B40 investment intention in P2P online lending platforms. However, contrary to expectations, trust and financial literacy are insignificant predictors of B40 investment intention. Recommendations for Practitioners: The P2P lending platform operators could enhance financial inclusion among the B40 group by ensuring borrowers provide sufficient, relevant, and reliable information with adequate security measures to minimise risk exposure. The financial regulators should also conduct periodic audits to ensure that the operators commit to enhancing information quality, platform security, and usability. Recommendation for Researchers: The intention to invest in online P2P lending platforms among the B40 group could be enhanced by improving information quality and user experience, addressing perceived risks, reassessing trust-building strategies and financial literacy initiatives, and adopting holistic, interdisciplinary approaches. These findings suggest targeted strategies to enhance financial inclusion and investment participation among B40 investors. Impact on Society: The study’s findings hold significant implications for financial regulators and institutions, such as the Securities Commission Malaysia, Bank Negara Malaysia, commercial and investment banks, and insurance companies. By focusing on these key determinants, policymakers can design targeted interventions to improve the accessibility and attractiveness of P2P lending platforms for B40 investors. Enhanced information quality and ease of use can be mandated through regulatory frameworks, while effective risk communication and mitigation strategies can be developed to build investor confidence. These measures can collectively promote financial growth and inclusion, supporting broader economic development goals. Future Research: Future research could expand the sample size to consider older B40 individuals across different countries and use a longitudinal survey to assess the actual investment decision of the B40 investors.

Aim/Purpose: This research aims to design a website-based group decision support system (DSS) user interface to support an integrated and sustainable waste management plan in Jagatera. The main focus of this research is to design a group DSS to help Jagatera prioritize several waste alternatives to be managed so that Jagatera can make the right decisions to serve the community. Background: The Indonesian government and various stakeholders are trying to solve the waste problem. Jagatera, as a waste recycling company, plays a role as a stakeholder in managing waste. In 2024, Jagatera plans to accept all waste types, which impacts the possibility of increasing waste management costs. If Jagatera does not have a waste management plan, this will impact reducing waste management services in the community. To solve this problem, the group DSS assists Jagatera in prioritizing waste based on aspects of waste management cost. Methodology: Jagatera, an Indonesian waste recycling company, is implementing a group DSS using the soft system methodology (SSM) method. The SSM process involves seven stages, including problem identification, problem explanation using rich pictures, system design, conceptual model design, real-life comparison, changes, and improvement steps. The final result is a prototype user interface design addressing the relationship between actors and the group DSS. The analytical hierarchy process (AHP) method prioritized waste based on management costs. This research obtained primary data from interviews with Jagatera management, a literature review regarding the group DSS, and questionnaires to determine the type of waste and evaluate user interface design. Contribution: This research focuses on determining waste handling priorities based on their management. It contributes the DSS, which uses a decision-making approach based on management groups developed using the SSM and AHP methods focused on waste management decisions. It also contributes to the availability of a user interface design from the DSS group that explains the interactions between actors. The implications of the availability of DSS groups in waste recycling companies can help management understand waste prioritization problems in a structured manner, increase decision-making efficiency, and impact better-quality waste management. Combining qualitative approaches from SSM to comprehend issues from different actor perspectives and AHP to assist quantitative methods in prioritizing decisions can yield theoretical implications when using the SSM and AHP methods together. Findings: This research produces a website-based group DSS user interface design that can facilitate decision-making using AHP techniques. The user interface design from the DSS group was developed using the SSM approach to identify complex problems at waste recycling companies in Indonesia. This study also evaluated the group DSS user interface design, which resulted in a score of 91.67%. This value means that the user interface design has met user expectations, which include functional, appearance, and comfort needs. These results also show that group DSS can enhance waste recycling companies’ decision-making process. The results of the AHP technique using all waste process information show that furniture waste, according to the CEO, is given more priority, and textile waste, according to the Managing Director. Group DSS developed using the AHP method allows user actors to provide decisions based on their perspectives and authority. Recommendations for Practitioners: This research shows that the availability of a group DSS is one of the digital transformation efforts that waste recycling companies can carry out to support the determination of a sustainable waste management plan. Managers benefit from DSS groups by providing a digital decision-making process to determine which types of waste should be prioritized based on management costs. Timely and complete information in the group DSS is helpful in the decision-making process and increases organizational knowledge based on the chosen strategy. Recommendation for Researchers: Developing a group DSS for waste recycling companies can encourage strategic decision-making processes. This research integrates SSM and AHP to support a comprehensive group DSS because SSM encourages a deeper and more detailed understanding of waste recycling companies with complex problems. At the same time, AHP provides a structured approach for recycling companies to make decisions. The group DSS that will be developed can be used to identify other more relevant criteria, such as environmental impact, waste management regulations, and technological capabilities. Apart from more varied criteria, the group DSS can be encouraged to provide various alternatives such as waste paper, metal, or glass. In addition to evaluating the group DSS’s user interface design, waste recycling companies need to consider training or support for users to increase system adoption. Impact on Society: The waste problem requires the role of various stakeholders, one of which is a waste recycling company. The availability of a group DSS design can guide waste recycling companies in providing efficient and effective services so that they can respond more quickly to the waste management needs of the community. The community also gets transparent information regarding their waste management. The impact of good group DSS is reducing the amount of waste in society. Future Research: Future research could identify various other types of waste used as alternatives in the decision-making process to illustrate the complexity of the prioritization process. Future research could also identify other criteria, such as environmental impact, social aspects of community involvement, or policy compliance. Future research could involve decision-makers from other parties, such as the government, who play an essential role in the waste industry.

Aim/Purpose: This study aims to develop a theoretical model based on the SOR (Stimulus – Organism – Response) framework and GETAMEL, which cover environmental, personal, and learning quality aspects to identify factors influencing students’ acceptance of the use of LMS in high schools, especially after COVID-19 pandemic. Background: After the COVID-19 pandemic, many high schools reopened for in-person classes, which led to a decreased reliance on e-learning. The shift from online to traditional face-to-face learning has influenced students’ perceptions of the importance of e-learning in their academic activities. Consequently, high schools are facing the challenge of ensuring that LMS can still be integrated into the teaching-learning process even after the pandemic ends. Therefore, this study proposes a model to investigate the factors that affect students’ actual use of LMS in the high school environment. Methodology: This study used 890 high school students to validate the theoretical model using Structural Equation Modeling (SEM) analysis to deliver direct, indirect, and moderating effect analysis. Contribution: This study combines SOR and acceptance theory to provide a model to explain high school students’ intention to use technology. The involvement of direct, indirect, and moderating effects analysis offers an alternative result and discussion and is considered another contribution of this study from a technical perspective. Findings: The findings show that perceived satisfaction is the most influential factor affecting the use of LMS, followed by perceived usefulness. Meanwhile, from indirect effect analysis, subjective norms and computer self-efficacy were found to indirectly affect actual use through perceived usefulness as a mediator. Content quality was also an indirect predictor of the actual use of LMS through perceived satisfaction. Further, the moderating effect of age influenced perceived satisfaction’s direct effect on actual use. Recommendations for Practitioners: This study provides practical recommendations that can be useful to high schools and other stakeholders in improving the use of LMS in educational environments. Specifically, exploring the implementation of LMS in high schools prior to and following the COVID-19 outbreak can offer valuable insights into the changing educational environment. Recommendation for Researchers: The results of this study present a significant theoretical contribution by employing a comprehensive approach to explain the adoption of LMS among high school students after the COVID-19 pandemic. This contribution extends the GETAMEL framework by incorporating environmental, personal, and learning quality aspects while also analyzing both direct and indirect effects, which have not been previously explored in this context. Impact on Society: This study provides knowledge to high schools for improving the use of LMS in educational environments post-COVID-19, leading to an enhanced teaching-learning process. Future Research: This study, however, is limited to collecting responses exclusively from Indonesian respondents. Therefore, the replication of the finding needs to consider the characteristics and culture similar to Indonesian students, which is regarded as the limitation of this study.

Aim/Purpose: In this study, we developed a recommendation system model designed to support decision-makers in identifying consumers eligible for pay-later options via consensus-based decision-making. This approach was chosen due to the high and complex risks involved, such as delayed payments, challenges in reaching consumers, and issues of bad credit. Background: The “pay-later” option, which allows consumers to postpone payment for e-commerce purchases, offers convenience and flexibility but also introduces several challenges: (i) by enabling payment deferral, merchants face financial risks, including potential delays or defaults in payment, adversely affecting their cash flow and profitability; and (ii) this payment delay can also heighten the risk of fraud, including identity theft and unauthorized transactions. Methodology: This study initiated a risk analysis utilizing the ROAD process. Considering contemporary economic developments and advancements in neural networks, integrating these networks into risk assessment has become crucial. Consequently, model development involved the amalgamation of three deep learning methods – CNN (Convolutional Neural Networks), RNN (Recurrent Neural Networks), and LSTM (Long Short-Term Memory) – to address various risk alternatives and facilitate multi-stage decision-making recommendations. Contribution: Our primary contribution is threefold. First, our study identified potential consumers by prioritizing those with the smallest associated problem consequence values. Second, we achieved an optimal recall value using a candidate generator. Last, we categorized consumers to assess their eligibility for pay-later rights. Findings: The findings from this study indicate that our multi-stage recommendation model is effective in minimizing the risk associated with consumer debt repayment. This method of consumer selection empowers policymakers to make informed decisions regarding which consumers should be granted pay-later privileges. Recommendations for Practitioners: This recommendation system is proposed to several key parties involved in the development, implementation, and use of pay-later systems. These parties include E-commerce Executive Management for financial analysis and risk evaluation, the Risk Management Team to assess and manage risks related to users utilizing Pay-Later services, and Sales Managers to integrate Pay-Later services into sales strategies. Recommendation for Researchers: Advanced fraud detection mechanisms were implemented to prevent unauthorized transactions effectively. The goal was to cultivate user confidence in the safety of their financial data by ensuring secure payment processing. Impact on Society: Ensuring consumers understand the terms and conditions of pay-later arrangements, including interest rates, repayment schedules, and potential fees, is crucial. Providing clear and transparent information, along with educating consumers about their financial responsibilities, helps prevent misunderstandings and disputes. Future Research: Our future development plans involve the ongoing assessment of the system’s performance to enhance prediction accuracy. This includes updating models and criteria based on feedback and changes in economic or market conditions. Upholding compliance with security and data privacy regulations necessitates the implementation of protective measures to safeguard consumer information. The implementation of such a system requires careful consideration to ensure fairness and adherence to legal standards. Additionally, it is important to acknowledge that algorithms and models may evolve over time through the incorporation of additional data and continuous evaluations.

Aim/Purpose: This study aims to investigate the influence of e-government public services on public trust at the local government level, addressing the pressing need to understand the factors shaping citizen perceptions and trust in government institutions. Background: With the proliferation of e-government initiatives worldwide, governments are increasingly turning to digital solutions to enhance public service delivery and promote transparency. However, despite the potential benefits, there remains a gap in understanding how these initiatives impact public trust in government institutions, particularly at the local level. This study seeks to address this gap by examining the relationship between e-government service quality, individual perceptions, and public trust, providing valuable insights into the complexities of citizen-government interactions in the digital age. Methodology: Employing a quantitative approach, this study utilises surveys distributed to users of e-government services in one of the regencies in Indonesia. The sample consists of 278 individuals. Data analysis is conducted using Partial Least Squares Structural Equation Modelling, allowing for the exploration of relationships among variables and their influence on public trust. Contribution: This study provides insights into the factors influencing public trust in e-government services at the local government level, offering a nuanced understanding of the relationship between service quality, individual perceptions, and public trust. Findings: This study emphasises information quality and service quality in e-government-based public services as crucial determinants of individual perception in rural areas. Interestingly, system quality in e-government services has no influence on individual perception. In the individual perception, perceived security and privacy emerge as the strongest antecedent of public trust, highlighting the need to guarantee secure and private services for citizens in rural areas. These findings emphasise the importance of prioritising high-quality information, excellent service delivery, and robust security measures to foster and sustain public trust in e-government services. Recommendations for Practitioners: Practitioners must prioritise enhancing the quality of e-government services due to their significant impact on individual perception, leading to higher public trust. Government agencies must ensure reliability, responsiveness, and the effective fulfilment of user needs. Additionally, upholding high standards of information quality in e-government services by delivering accurate, relevant, and timely information remains crucial. Strengthening security measures through robust protocols such as data encryption and secure authentication becomes essential for protecting user data. With that in mind, the authors believe that public trust in government would escalate. Recommendation for Researchers: Researchers could investigate the relation between system quality in e-government services and individual perception in different rural settings. Longitudinal studies could also elucidate how evolving service quality, information quality, and security measures impact user satisfaction and trust over time. Comparative studies across regions or countries can reveal cultural and contextual differences in individual perceptions, identifying both universal principles and region-specific strategies for e-government platforms. Analysing user behaviour and preferences across various demographic groups can inform targeted interventions. Furthermore, examining the potential of emerging technologies such as blockchain or artificial intelligence in enhancing e-government service delivery, security, and user engagement remains an interesting topic. Impact on Society: This study’s findings have significant implications for fostering public trust in government institutions, ultimately strengthening democracy and citizen-government relations. By understanding how e-government initiatives influence public trust, policymakers can make informed decisions to improve service delivery, enhance citizen engagement, and promote transparency, thus contributing to more resilient and accountable governance structures. Future Research: Future research could opt for longitudinal studies to evaluate the long-term effects of enhancements in service quality, information quality, and security. Cross-cultural investigations can uncover universal principles and contextual differences in user experiences, supporting global e-government strategies in rural areas. Future research could also improve the research model by adding more variables, such as risk aversion or fear of job loss, to gauge individual perceptions.

Aim/Purpose: This paper intends to answer the question regarding the extent to which political postings with value differences/similarities will influence the level of implicit knowledge sharing (KS) among work colleagues in organizations. More specifically, the study assesses contributors’ responses to a workmate’s publicity about politics on social media platforms (SMP) and their eagerness to implement implicit KS to the co-worker. Background: Previously published articles have confirmed an association between publicity about politics and the reactions from workfellows in the organization. Moreover, prior work confirmed that workers’ social media postings about politics may create unfavorable responses, such as being disliked and distrusted by workfellows. This may obstruct the KS because interpersonal relations are among the KS’s essential components. Therefore, it is imperative to assess whether the workfellows’ relationship affected by political publicity would impede the KS in the office. Methodology: Data was gathered using the vignette technique and online survey. A total of 510 online and offline questionnaires were distributed to respondents in Indonesian Halal firms who have implemented knowledge-sharing practices and have been at work for no less than twelve months in the present role. Next, the 317 completed questionnaires were examined with partial least squares structural equation modeling (PLS-SEM). Contribution: Postings about politics on SMP can either facilitate or impede the level of KS in organizations, and this research topic is relatively scarce in the knowledge management discipline. While previously published articles have concentrated on public organizations, this research centers on private firms. Moreover, this work empirically examines private companies in Indonesia, which is also understudied in the existing literature. Findings: The outcomes confirm that perceived political value similarity (PPV) in a co-worker’s social-media publicity has a significant and indirect influence on contributors’ eagerness to perform implicit/tacit KS. Further, colleague likability and trustworthiness significantly influence the level of KS among respondents. As PPV significantly forms colleague likability, likability strongly and positively shapes trustworthiness. Recommendations for Practitioners: The study shows that political publicity significantly affects implicit knowledge sharing (KS). As a result, managers and leaders, particularly those in private firms, are strengthened to instruct their staff about the ramifications of publicity embedded in employees’ SMP postings, particularly about political topics, as it may result in either negative or positive perceptions amongst the staff towards the workmate who posts. Recommendation for Researchers: As this study focuses on examining KS behavior in a large context, i.e., Indonesia Halal firms that dominate the Indonesian economy, and the fact that much polarization research focuses on society at large and less on specific sectors of life, it is important and interesting for researchers to conduct similar studies in a specific workplace as political agreements and disagreements become so important and consequential in everyday lives. Impact on Society: This article makes the implication that a person’s personality can influence how they react to political posts on SMP. It is difficult for the exposers to know the personality of each viewer of publicity in daily life. Workers’ newfound knowledge can motivate them to use SMP responsibly and lessen the probability that they will disclose information that might make their co-workers feel or perceive anything unfavorably. Future Research: There is a need for further studies to examine if the results can be applied to different locations and organizations, as individuals’ behaviors may vary according to the cultures of society and firms. Furthermore, future research can take into account the individual characteristics of workers, such as hospitability, self-confidence, and psychological strength, which may be well-matched with future work models. Future research may potentially employ a qualitative technique to offer deeper insights into the same topic.

Aim/Purpose: This study focuses on two targeting strategies of out-store Location-Based Mobile Advertising (LBMA): the geo-fencing strategy (i.e., targeting customers who are near the focal store) and the geo-conquesting strategy (i.e., targeting those who are near competitors’ stores to visit the focal store). To the authors’ knowledge, no previous studies have compared the perceived intrusiveness of advertisements (ads) in geo-fencing and geo-conquesting settings, despite the accumulating literature on out-store LBMA. Hence, the aim of this study is to determine which targeting strategy is more effective in terms of reducing the perception of ads’ intrusiveness and increasing positive customers’ attitudes and purchase intention. Background: The intrusive nature of LBMA is perceived negatively by some customers, impacting their attitudes toward the ad, purchase intention, and even their perception of the brand. Therefore, identifying the targeting strategy under which ads are perceived as less intrusive is essential. Additionally, brick-and-mortar clothing stores in Jordan are facing challenges due to the rise of online shopping and increased competition from nearby stores. Thus, examining geo-fencing and geo-conquesting might tackle these challenges and encourage local clothing retailers to adopt these strategies. Methodology: A quantitative method was used in this study. A between-subjects experimental design was used to collect the data using a scenario-based survey distributed to Jordanians aged 18 to 45. A total of 531 responses were collected. After excluding those who do not belong to the targeted age group and those who did not pass the manipulation check, 406 responses were analyzed using the Statistical Package for the Social Sciences (SPSS) software version 28 and the Analysis of Moment Structures (AMOS) software version 26 to conduct Structural Equation Modeling (SEM). Contribution: This work offers valuable contributions by investigating the impact of the perceived intrusiveness of ads on purchase intention in the contexts of geo-fencing and geo-conquesting, which has not been studied before. Additionally, it fills a gap by examining this phenomenon in Jordan, a developing country in which attitudes toward LBMA have not been previously explored. Findings: The results revealed that location-based mobile ads sent under a geo-fencing strategy are perceived as less intrusive than those sent under a geo-conquesting strategy. In addition, customers’ attitudes fully mediate the relationship between intrusiveness and purchase intention only under the geo-fencing strategy. Ultimately, neither of the strategies is more effective in terms of increasing positive customer attitudes and purchase intentions in the context of clothing retail stores in Jordan. Recommendations for Practitioners: Clothing retailers in Jordan should consider adopting geo-fencing and geo-conquesting strategies to boost purchase intentions and tackle industry challenges. Additionally, to increase purchase intentions with geo-fencing, practitioners should focus on fostering positive customer attitudes toward ads, as simply perceiving them as less intrusive is not sufficient to drive purchase intention without the mediating effect of positive attitudes. Recommendation for Researchers: This research is crucial for academics and researchers as geolocation technology and LBMA are expected to advance significantly in the future. Researchers can investigate this topic through a randomized field experiment, followed by a research questionnaire to collect data from a real-world setting. Impact on Society: Utilizing LBMA is essential for local clothing retail stores that are trying to effectively reach and connect with their customers because searching the Internet for local goods and services is done primarily on mobile devices. Indeed, this study revealed that customers in both settings (i.e., geo-fencing and geo-conquesting) reported a high intention to visit the promoting store and to purchase from the advertised product category. Future Research: Future research can apply this topic to different industries and cultural contexts, as the results may vary across industries and regions. Moreover, future research could build on this study by investigating additional constructs, such as product category involvement, customization, and content type of the message (e.g., informative, entertaining).

Aim/Purpose: This study aims to analyze the factors that influence user addiction to AR face filters in social network applications and their impact on the online social anxiety of users in Indonesia. Background: To date, social media users have started to use augmented reality (AR) face filters. However, AR face filters have the potential to create positive and negative effects for social media users. The study combines the Big Five Model (BFM), Sense of Virtual Community (SVOC), and Stimuli, Organism, and Response (SOR) frameworks. We adopted the SOR theory by involving the personality factors and SOVC factors as stimuli, addiction as an organism, and social anxiety as a response. BFM is the most significant theory related to personality. Methodology: We used a quantitative approach for this study by using an online survey. We conducted research on 903 Indonesian respondents who have used an AR face filter feature at least once. The respondents were grouped into three categories: overall, new users, and old users. In this study, group classification was carried out based on the development timeline of the AR face filter in the social network application. This grouping was carried out to facilitate data analysis as well as to determine and compare the different effects of the factors in each group. The data were analyzed using the covariance-based structural equation model through the AMOS 26 program. Contribution: This research fills the gap in previous research which did not discuss much about the impact of addiction in using AR face filters on online social anxiety of users of social network applications. Findings: The results of this study indicated neuroticism, membership, and immersion influence AR face filter addiction in all test groups. In addition, ARA has a significant effect on online social anxiety. Recommendations for Practitioners: The findings are expected to be valuable to social network service providers and AR creators in improving their services and to ensure policies related to the list of AR face filters that are appropriate for use by their users as a form of preventing addictive behavior of that feature. Recommendation for Researchers: This study suggested other researchers consider other negative impacts of AR face filters on aspects such as depression, life satisfaction, and academic performance. Impact on Society: AR face filter users may experience changes in their self-awareness in using face filters and avoid the latter’s negative impacts. Future Research: Future research might explore other impacts from AR face filter addiction behavior, such as depression, life satisfaction, and so on. Apart from that, future research might investigate the positive impact of AR face filters to gain a better understanding of the impact of AR face filters.

Aim/Purpose: This study examined the use of Social Media Applications (SMAs) for accessing health-related information within a heterogeneous population in Jordan. The objective of this study was therefore threefold: (i) to investigate the usage of SMAs, including WhatsApp, Twitter, YouTube, Snapchat, Instagram, and Facebook, for accessing health-related information; (ii) to examine potential variations in the use of SMAs based on demographic and behavioral characteristics; and (iii) to identify the factors that can predict the use of SMAs. Background: There has been limited focus on investigating the behavior of laypeople in Jordan when it comes to seeking health information from SMAs. Methodology: A cross-sectional study was conducted among the general population in Jordan using an online questionnaire administered to 207 users. A purposive sampling technique was employed, wherein all the participants actively sought online health information. Descriptive statistics, t-tests, and regression analyses were utilized to analyze the collected data. Contribution: This study adds to the existing body of research on health information seeking from SMAs in developing countries, with a specific focus on Jordan. Moreover, laypeople, often disregarded by researchers and health information providers, are the most vulnerable individuals who warrant greater attention. Findings: The findings indicated that individuals often utilized YouTube as a platform to acquire health-related information, whereas their usage of Facebook for this purpose was less frequent. Participants rarely utilized Instagram and WhatsApp to obtain health information, while Twitter and Snapchat were very seldom used for this purpose. The variable of sex demonstrated a notable positive correlation with the utilization of YouTube and Twitter for the purpose of finding health-related information. Conversely, the variable of nationality exhibited a substantial positive correlation with the utilization of Facebook, Instagram, and Twitter. Consulting medical professionals regarding information obtained from the Internet was a strong indicator of using Instagram to search for health-related information. Recommendations for Practitioners: Based on the empirical results, this study provides feasible recommendations for the government, healthcare providers, and developers of SMAs. Recommendation for Researchers: Researchers should conduct separate investigations for each application specifically pertaining to the acquisition of health-related information. Additionally, it is advisable to investigate additional variables that may serve as predictors for the utilization of SMAs. Impact on Society: The objective of this study is to enhance the inclination of the general public in Jordan to utilize SMAs for health-related information while also maximizing the societal benefits of these applications. Future Research: Additional research is required to examine social media’s usability (regarding ease of use) and utility (comparing advantages to risks) in facilitating effective positive change and impact in healthcare.

Breast cancer is leading cause of mortality among women compared to other types of cancers. Hence, early breast cancer diagnosis is crucial to the success of treatment. Various pathological and imaging tests are available for the diagnosis of breast cancer. However, it may introduce errors during detection and interpretation, leading to false-negative and false-positive results due to lack of pre-processing of it. To overcome this issue, we proposed a effective image pre-processing technique-based on Otsu's thresholding and single-seeded region growing (SSRG) to remove artefacts and segment the pectoral muscle from breast mammograms. To validate the proposed method, a publicly available MIAS dataset was utilised. The experimental finding showed that proposed technique improved 18% breast cancer detection accuracy compared to existing methods. The proposed methodology works efficiently for artefact removal and pectoral segmentation at different shapes and nonlinear patterns.

The most common kind of blood cancer in people of all ages is leukaemia. The fractional mayfly optimisation (FMO) based DenseNet is proposed for the identification and classification of leukaemia in federated learning (FL). Initially, the input image is pre-processed by adaptive median filter (AMF). Then, cell segmentation is done using the Scribble2label. After that, image augmentation is accomplished. Finally, leukaemia classification is accomplished utilising DenseNet, which is trained using the FMO. Here, the FMO is devised by merging the mayfly algorithm (MA) and the fractional concept (FC). Following local training, the server performs local updating and aggregation using a weighted average by RV coefficient. The results showed that FMO-DenseNet attained maximum accuracy, true negative rate (TNR) and true positive rate (TPR) of 94.3%, 96.5% and 95.3%. Moreover, FMO-DenseNet gained minimum mean squared error (MSE) and root mean squared error (RMSE) of 5.7%, 9.2% and 30.4%.

With the continuous growth and importance of data, the need for strong data protection becomes crucial. Encryption plays a vital role in preserving the confidentiality of data, and attribute-based encryption (ABE) offers a meticulous access control system based on attributes. This study investigates the integration of Fernet encryption with initialisation vector (IV) and ABE, resulting in a hybrid encryption approach that enhances both security and flexibility. By combining the advantages of Fernet encryption and IV-based encryption, the hybrid encryption scheme establishes an effective and robust mechanism for safeguarding data. Fernet encryption, renowned for its simplicity and efficiency, provides authenticated encryption, guaranteeing both the confidentiality and integrity of the data. The incorporation of an initialisation vector (IV) introduces an element of randomness into the encryption process, thereby strengthening the overall security measures. This research paper discusses the advantages and drawbacks of the hybrid encryption of Fernet and IV with ABE.

The emergence of service ecosystems can accelerate the industrial renewal required because of urgent global challenges. However, existing research has not sufficiently grasped the social dynamics of coevolution in ecosystems that enhance industrial renewal. This study aimed to advance ecosystem research through a practice lens and to present the key characteristics of industrial service ecosystem practice involved in industrial renewal. Consequently, its three characteristics - <i>accomplishment</i>, <i>attractiveness</i> and <i>actionability</i> - were configured based on an abductive study derived from the ecosystem literature, three practice-oriented approaches to learning, and two case ecosystem examinations. These features created the logic for resource integration and enhanced ecosystems to evolve as units, thus exceeding the actors' independent avenues of renewal. The findings of this study provided a deeper understanding of the coevolution in ecosystems needed to accelerate industrial renewal as well as a novel conceptualisation of an <i>ecosystem-as-practice</i> for further studies.

This study investigates cross-border commercial air passenger traffic in Africa, focusing on the development of the 15 busiest country pairs during the period 1989 to 2015. It explores dimensions not previously studied by using ICAO's 'Traffic by Flight Stage' (TFS) and data from the CEPII Gravity Dataset. The spatial results show on an uneven geographical distribution of country pairs with the centre of gravity to South, East and North-East Africa, with one long-distance corridor between Egypt and South Africa. Countries in North and West Africa have rather few linkages, except for Egypt. Central African countries are not represented among the 15 country pairs. Although the number of passengers and the rank among the countries have shifted, South Africa and Egypt stand out, as having most country pair connections. Factors such as changing economic, diplomatic and political relations have had an influence on changing country pair connections throughout the period. A number of variables were selected to investigate how they correlated with Africa's commercial passenger traffic. Of the seven variables selected, five did show on a correlation and two did partly so. In that view, Africa's air traffic follows rather typical patterns.

This study aims to identify and understand the perspectives of automotive aftersales stakeholders regarding current challenges posed by decarbonisation strategies. It examines potential responses that the automotive aftersales business could undertake to address these challenges. Semi-structured interviews were undertaken with automotive industry experts from Europe and Latin America. This paper focuses primarily on impacts of decarbonisation upon automotive aftersales and the potential role of data in that business. Results show that investment in technology will be a condition for businesses that want to remain active in the industry. Furthermore, experts agree that incumbent manufacturers are not filling the technology gap that the energy transition is creating in the automotive sector, a consequence of which will be the entrance of new players from other sectors. The current aftersales businesses will potentially lose bargaining control. Moreover, policy makers are seen as unreliable leaders of the transition agenda.