Some Eastern Iowans are ready to go camping.

With Gov. Kim Reynolds allowing campgrounds across the state to open Friday, some people wasted little time in heading outdoors.

“They’re already starting to fill up,” said Ryan Schlader of Linn County Conservation. “By about 7 this morning, we had a dozen at Squaw Creek Park. People were coming in bright and early to camp. We’re not surprised.”

Schlader said Linn County Conservation tried to have the campgrounds open at the county’s Squaw Creek, Morgan Creek and Pinicon Ridge parks at 5 a.m. Friday. He expected all of them would be busy.

“I think people were ready to go,” he said.

Lake Macbride State Park in Johnson County didn’t see quite as much of a rush for campsites, park manager Ron Puettmann reported Friday morning, saying he’d had six walk-ins for the park’s 42 campsites.

Camping this weekend will be done on a first-come, first-served basis. Sites won’t be available for reservations until next week, though online reservations can be made now, Puettmann said.

“I’m quite sure people were waiting anxiously to get on,” he said.

While Reynolds’ campground announcement came Wednesday, Schlader and Puettmann said they had no issues having the campgrounds ready for Friday.

Schlader said county staff have been in touch with the Iowa Department of Natural Resources and other county conservation boards to discuss protocols for reopening to ensure a safe experience for campers and employers.

“We anticipated at some point the order would be lifted,” Schlader said. “We were anticipating maybe May 15. The campgrounds were in good shape and ready to go.”

For now, camping comes with some limitations:

• Campers can camp only in a self-contained unit with a functioning restroom, such as a recreational vehicle.

• Shower houses with restrooms will remain closed for the time being.

• Campsites are limited to six people unless they are from the same household.

• No visitors are allowed at the campsites.

Puettmann said staffers and a DNR officer will be on hand to make sure guidelines are followed, but he didn’t anticipate enforcement would be an issue.

“For the most part, we’re going to allow people to police themselves,” he said.

It’s hard to gauge demand, Schlader said.

The weather isn’t yet deal for camping, and some people might not be ready to camp, given the continuing coronavirus.

“There is a lot of uncertainty,” he said. “Do people feel like they need to get out and enjoy a camping experience within their own campsite, or do people still feel under the weather and think it’s not a good idea for my family to go right now? ... We just want this to be an option for people.”

Comments: (319) 339-3155; lee.hermiston@thegazette.com

A man suspected of a workplace shooting last month at a vinyl window manufacturer in southwest Cedar Rapids turned himself into authorities Friday.

Jamal Devonte Edwards, 26, has been wanted since two men were shot at Associated Materials, 3801 Beverly Rd. SW, the morning of April 9.

Cedar Rapids police had indicated Edwards was wanted in particular for the shooting of Mark Robertson, 36.

Edwards faces charges of attempted murder, intimidation with a dangerous weapon, going armed with intent and willful injury.

The U.S. Marshals Service helped locate Edwards, distributing a photo of Edwards along the Gulf Coast. He was located in Mobile, Ala. when his father brought him to the Mobile police department so he could turn himself in, according to a Cedar Rapids police news release.

The April 9 shooting was reported at 5:03 a.m. after two employees were shot at Associated Materials. Both suffered non-life-threatening injuries, police said.

Police said at the time it appeared the shooter knew the two men.

Shawn Hardy, senior vice president of integrated products for Associated Materials, confirmed Edwards worked at the Cedar Rapids business, which gave him access to the building, but said he had been employed through a temp agency.

For the second consecutive day the number of Iowa patients hospitalized with COVID-19 has dropped.

The Iowa Department of Public Health reported Saturday that 402 people were hospitalized with the coronavirus, down five from the previous day, and down 15 from its current peak of 417 on Thursday.

Saturday’s totals mark the first time back-to-back COVID-19 hospitalization decreases since figures had begun being tracked.

Nine deaths in Iowa were recorded Saturday, according to the Department of Public Health, bringing the total to 252. But it snapped a streak of four consecutive days in which 10 or more deaths were recorded in Iowa.

Four of the deaths were in Polk County, bringing Polk’s total to 58 — matching Linn County’s as most in the state.

Saturday was the first time since Monday that no deaths in Linn County were reported.

Two deaths were in Jasper County, one each in Johnson, Muscatine and Tama counties.

Four of those who died were 81 years of age and older, three were 61 to 80 and two were aged 41 to 60.

Saturday’s report also showed there now have been a total of 29 outbreaks recorded in long-term care facilities statewide.

Including Saturday’s latest figures from the Department of Public Health — with 214 positive cases, for a total of 11,671 — these are the top 10 Iowa counties in terms of total cases:

• Polk — 2,194

• Woodbury — 1,554

• Black Hawk — 1,477

• Linn — 819

• Marshall — 702

• Dallas — 660

• Johnson — 549

• Muscatine — 471

• Tama — 327

• Louisa — 282.

More than 71,000 Iowans — one of 43 — have been tested, and 16.3 percent of those tested have been positive cases, according to the state.

Forty-six percent of Iowa deaths have been those age 81 and older, while 87 percent are 61 and older. Fifty-one percent have been male.

Beginning this past Friday, Gov. Kim Reynolds permitted more businesses to partially reopen.

“I’m proud to say that Iowans do what they always do and they responded,” she said at her Thursday news conference, her most recent. “So since we’ve kind of really accomplished what we were trying to do, ... now we have shifted our focus from mitigation and resources to managing and containing virus activity as we begin to open Iowa back up.”

Reynolds met with President Donald Trump on Wednesday at the White House to discuss the pandemic and mitigation strategies in the state.

Vice President Mike Pence visited Iowa Friday, when he met with faith leaders and agricultural and food company executives.

Comments: (319) 368-8857; jeff.linder@thegazette.com

BIG NEWS: My custom Lightroom presets are now available and 50% off for a limited time with discount code HOLIDAY50. Link in profile!

This collection includes two styles (Everyday and Clean) that I use to edit every shot on this feed. I can’t wait to see what you all do with them! Stay tuned to my upcoming tutorials on how to put the presets to good use. ???? (at Toronto, Ontario)

This is from my favourite shoot/photoset of all time. It was spontaneous, serendipitous, and simply beautiful. ☂️
.
The edit: After applying my preset (I used Clean for this one), I bumped up the exposure and desaturated the yellows/oranges a bit. As a finishing touch, I used a graduated filter to brighten the top a bit and a radial filter on @sllychn to brighten and sharpen the focal point. That’s it! ✨ (at Toronto, Ontario)

Preset (Everyday) + transform + exposure + graduated filter + radial filter. If shots like this take more than 2 minutes to edit, it’s probably not worth editing. ⏱
—
Boxing Day will be the last day to get my Lightroom presets discounted, which leaves you only 3 more days! Get on it! ???? (at Toronto, Ontario)

The world has changed. Everything we do is more immediately visible to others than ever before, but much remains the same; the relationships we develop are as important as they always were. This post is a few thoughts on self-promotion, and how to have good relationships as a self-publisher.

Meeting people face to face is ace. They could be colleagues, vendors, or clients; at conferences, coffee shops, or meeting rooms. The hallway and bar tracks at conferences are particularly great. I always come away with a refreshed appreciation for meatspace. However, most of our interactions take place over the Web. On the Web, the lines separating different kinds of relationships are a little blurred. The company trying to get you to buy a product or conference ticket uses the same medium as your friends.

Freelancers and small companies (and co-ops!) can have as much of an impact as big businesses. ‘I publish therefore I am’ could be our new mantra. Hence this post, in a way. Although, I confess I have discussed these thoughts with friends and thought it was about time I kept my promise to publish them.

Publishing primarily means text and images. Text is the most prevalent. However, much more meaning is conveyed non-verbally. ‘It’s not what you say, it’s how you say it.’

Text can contain non-verbal elements like style — either handwritten or typographic characters — and emoticons, but we don’t control style in Twitter, email, or feeds. Or in any of the main situations where people read what we write (unless it’s our own site). Emoticons are often used in text to indicate tone, pitch, inflection, and emotion like irony, humour, or dismay. They plug gaps in the Latin alphabet’s scope that could be filled with punctuation like the sarcasm mark. By using them, we affirm how important non-verbal communication is.

The other critical non-verbal communication around text is karma. Karma is our reputation, our social capital with our audience of peers, commentators, and customers. It has two distinct parts: Personality, and professional reputation. ‘It’s not what was said, it’s who said what.’

So, after that quick brain dump, let me recap:

• Relationships are everything.
• We publish primarily in text without the nuance of critical non-verbal communication.
• Text has non-verbal elements like style and emoticons, but we can only control the latter.
• Context is also non-verbal communication. Context is karma: Character and professional reputation.

Us Brits are a funny bunch. Traditionally reserved. Hyperbole-shy. At least, in public. We use certain extreme adjectives sparingly for the most part, and usually avoid superlatives if at all possible. We wince a little if we forget and get super-excited. We sometimes prefer ‘spiffing’ accompanied by a wry, ironic smile over an outright ‘awesome’. Both are genuine — one has an extra layer in the inflection cake. However, we take great displeasure in observing blunt marketing messages that try to convince us something is true with massive, lobe-smacking enthusiasm, and some sort of exaggerated adjective-osmosis effect. We poke fun at attempts to be overly cool. We expect a decent level of self-awareness and ring of honesty from people who would sell us stuff. The Web is no exception. In fact, I may go so far as to say that the sensibilities of the Web are fairly closely aligned with British sensibilities. Without, of course, any of our crippling embarrassment. In an age when promoting oneself on the Web is almost required for designers, that’s no bad thing. After all, running smack bang through the middle of the new marketing arts is a large dose of reality; we’re just a bunch of folks telling our story. No manipulation, cool-kid feigned nonchalance, or lobe-smacking enthusiasm required.

Consider what the majority of designers do to promote themselves in this brave new maker-creative culture. People like my friend, Elliot Jay Stocks: making his own magazine, making music, distributing WordPress themes, and writing about his experiences. Yes, it is important for him that he has an audience, and yes, he wants us to buy his stuff, but no, he won’t try to impress or trick us into liking him. It’s our choice. Compare this to traditional advertising that tries to appeal to your demographic with key phrases from your tribe, life-style pitches, and the usual raft of Freudian manipulations. (Sarcasm mark needed here, although I do confess to a soft spot for the more visceral and kitsch Freudian manipulations.)

There is a middle ground between the two though. A dangerous place full of bad surprises: The outfit that seems like a human being. It appears to publish just like you would. They want money in exchange for their amazing stuff they’re super-duper proud of. Then, you find out they’re selling it to you at twice the price it is in the States, or that it crashes every time it closes, or has awful OpenType support. You find out the human being was really a corporate cyborg who sounds like you, but is not of you, and it’s impervious to your appeals to human fairness. Then there are the folks who definitely are human, after all they’re only small, and you know their names. All the non-verbal communication tells you so. Then you peek a little closer —  you see the context — and all they seem to do is talk about themselves, or their business. Their interactions are as carefully crafted as the big companies, and they treat their audience as a captive market. Great spirit forefend they share the bandwidth by celebrating anyone else. They sound like one of us, but act like one of them. Their popularity is inversely proportional to their humanity.

Extreme examples, I know. This is me exploring thoughts though, and harsh light helps define the edges. Feel free to sound off if it offends, but mind your non-verbal communication. :)

That brings me to self-promotion versus self-aggrandisement; there’s a big difference between the two. As independent designers and developer-type people, self-promotion is good, necessary, and often mutually beneficial. It’s about goodwill. It connects us to each other and lubricates the Web. We need it. Self-aggrandisement is coarse, obvious, and often an act of denial; the odour of insecurity or arrogance is nauseating. It is to be avoided.

If you consider the difference between a show-off and a celebrant, perhaps it will be clearer what I’m reaching for:

The very best form of self-promotion is celebration. To celebrate is to share the joy of what you do (and critically also celebrate what others do) and invite folks to participate in the party. To show off is a weakness of character — an act that demands acknowledgement and accolade before the actor can feel the tragic joy of thinking themselves affirmed. To celebrate is to share joy. To show-off is to yearn for it.

It’s as tragic as the disdainful, casual arrogance of criticising the output of others less accomplished than oneself. Don’t be lazy now. Critique, if you please. Be bothered to help, or if you can’t hold back, have a little grace by being discreet and respectful. If you’re arrogant enough to think you have the right to treat anyone in the world badly, you grant them the right to reciprocate. Beware.

Celebrants don’t reserve their bandwidth for themselves. They don’t treat their friends like a tricky audience who may throw pennies at you at the end of the performance. They treat them like friends. It’s a pretty simple way of measuring whether what you publish is good: would I do/say/act the same way with my friends? Human scales are always the best scales.

So, this ends. I feel very out of practise at writing. It’s hard after a hiatus. These are a few thoughts that still feel partially-formed in my mind, but I hope there was a tiny snippet or two in there that fired off a few neurons in your brain. Not too many, though, it’s early yet. :)

This image shows a particular optical illusion that confronts us every day. Notice the difference between the black text on a white background and the reverse. With reversed type — light text on a darker background — the strokes seem bolder.

Black text on white is very familiar, so we can be forgiven for thinking it correctly proportioned. For familiarity’s sake we can say it is, but there are two effects happening here: The white background bleeds over the black, making the strokes seem thinner. With reversed type the opposite is true: The white strokes bleed over the black, making it seem bolder.

One of the most obvious examples of this is with signs where the letters are punched into the surround then lit from inside. In his article, Designing the ultimate wayfinding typeface, Ralph Herrmann used his own Legibility Text Tool to simulate this effect for road and navigational signs.

One might say that characters are only correctly proportioned with low-contrast. Although objective reality hails that as true, it isn’t a good reason to always set type with low contrast. Type designers have invariably designed around optical illusions and the constraints of different media for us. Low-contrast text can also create legibility and accessibility problems. Fortunately, kind folks like Gez Lemon have provided us with simple tools to check.

As fascinating as optical illusions are —  the disturbing, impossible art of Escher comes to mind — we can design around reversed body type. On the Web, increasing tracking and leading are as simple as increasing the mis-named letter-spacing and line-height in CSS. However, decreasing font weight is a thornier problem. Yes, we will be able to use @font-face to select a variant with a lighter weight, but the core web fonts offer us no options, and there are only a few limited choices with system fonts like Helvetica Neue.

Reversing a logotype

For logotype there are plenty of options, but it makes me slightly uncomfortable to consider switching to a lighter font for reversed type logos. The typeface itself is not the logotype; the variant is, so switching font could be tricky. Ironically, I’d have to be very sure that that was no perceivable difference using a lighter weight font. Also, with display faces, there’s often not a lighter weight available — a problem I came across designing the Analog logo.

The logotype worked well when testing it in black on white. However, I wanted a reversed version, too. That’s when I noticed the impact of the optical illusion:

It looked bloated! Objective reality be damned; it simply wouldn’t do. After a few minutes contemplating the carnage of adjusting every control point by hand, I remembered something; eureka!

Punching the paths through a background image in Fireworks CS4 removed the illusion. (Select both the path and the background then using Modify > Combine Paths > Punch.) Is this a bug? I don’t know, but if it is, it’s a useful one for a change!

I grinned. I was happy. All was well with the world again. Lovely! Now I could go right ahead and think about colour and I wouldn’t be far from done. This is how it emerged:

A final note on logotype design & illusions

Before we even got to actual type for the Analog logo, we first had to distill what it would convey. In our case, Alan took us through a process to define the brand values and vision. What emerged were keywords and concepts that fed into the final design. The choice of type, colour, and setting were children of that process. Style is the offspring of meaning.

I always work in greyscale for the first iterations of a new logo for a few simple reasons:

1. The form has to work independently of colour — think printing in greyscale or having the logo viewed by people with a colour-impairment.
2. It allows for quick testing of various sizes — small, high contrast versions will emphasise rendering and legibility issues at screen resolutions, especially along curves.
3. I like black and white. :)

I realise that in this day and age the vast majority of logos need to perform primarily on the Web. However, call me old-fashioned, but I still think that they should work in black and white, too.

Brands and display faces emerged with consumer culture during the 19^th Century. Logotypes were displayed prominently in high streets, advertising hoardings, and on sign boards. In many instances the message would be in black and white. They were designed to be legible from a distance, at a glance, and to be instantly recognisable. Even with colour, contrast was important.

The same is true for the Web today; only the context has changed, and the popularity of logomarks and icons. We should always test any logo at low resolutions and sizes, and the brand must still have good contrast (regardless of WCAG 2.0) to be optimal. A combination of colour and form works wonders, but in a world of a million colours where only a handful are named in common parlance, having the right form still seems a smarter choice than trying to own a palette or colour.

A final word

This article was prompted by a happy accident followed by a bit of reading. There are many references to optical illusions in design and typography books. The example image at the start of this article was inspired by one found in the excellent Stop Stealing Sheep and Find Out How Type Works by Erik Spiekermann and E.M. Ginger. There’s also plenty of online material about optical or visual illusions you can dive into. There’s also more on . Oh, and don’t forget the work of M. C. Escher!

Human eyes are amazing. In two sets of watery bags we get a wide-angle lens with incredibly sharp focus and ridiculous depth of field. Apparently our brain is even clever enough to compensate for the lag in the signal getting from retina to cortex. I know next to nothing about ocular science. Spending a morning reading and thinking about optical illusions, and contemplating my own view here in the garden office is pretty awe-inspiring. If only my photographs were as good as my eyes, illusions or no.

Wow, this has been a busy period. I’m just back from the Ampersand web typography conference in Brighton, and having a catch-up day in Mild Bunch HQ. Just before that I’ve been working flat out. First on Mapalong which was a grass-roots sponsor of Ampersand, and is going great guns. Then on an article for The Manual which is being published soon, and on 8 Faces #3 which is in progress right now. Not to mention the new talk for Ampersand which left me scratching my head and wondering if I was making any sense at all. More on that in a subsequent post.

In the meantime two previous events deserve a mention. (This is me starting more of a journalistic blog. :)

First of all, an interview with Simon Pascal Klien, the typographer and designer who’s curating the Design Festival podcast at the moment. We talked about all things web typography. Pascal cheekily left in a bit of noise from me in the prelude, and that rant pretty much sets the tone for the rest of the conversation. Thanks for your time, Pascal! If anyone reading this would care to listen in, the podcast can be downloaded or played from here:

Secondly, Daniel Bogan of The Setup sent me a few questions about my own tools. My answers are pretty clipped because of time, but you may find it interesting to compare this designer’s setup with your own:

I should note that in the meantime I’ve started writing with Writer, and discovered the great joy of keeping a journal and notes with a Midori Traveler’s Notebook. The latter is part of an on-going search I’m having to find Tools for Life. More on that, too at some point. Here’s my current list of topics I want to write about shortly:

• Ampersand, the aftermath
• Marrying a FujiFilm X100
• No-www
• Tools for life
• Paper versus pixels

There, I’ve written it!

At the Subscribe 9 Conference, we presented the first version of our new Audio Inspector:
The Auphonic Audio Inspector is shown on the status page of a finished production and displays details about what our algorithms are changing in audio files.

A screenshot of the Auphonic Audio Inspector on the status page of a finished Multitrack Production.
Please click on the screenshot to see it in full resolution!

It is possible to zoom and scroll within audio waveforms and the Audio Inspector might be used to manually check production result and input files.

In this blog post, we will discuss the usage and all current visualizations of the Inspector.
If you just want to try the Auphonic Audio Inspector yourself, take a look at this Multitrack Audio Inspector Example.

Inspector Usage

Control bar of the Audio Inspector with scrollbar, play button, current playback position and length, button to show input audio file(s), zoom in/out, toggle legend and a button to switch to fullscreen mode.

Seek in Audio Files

Click or tap inside the waveform to seek in files. The red playhead will show the current audio position.

Zoom In/Out

Use the zoom buttons ([+] and [-]), the mouse wheel or zoom gestures on touch devices to zoom in/out the audio waveform.

Scroll Waveforms

If zoomed in, use the scrollbar or drag the audio waveform directly (with your mouse or on touch devices).

Show Legend

Click the [?] button to show or hide the Legend, which describes details about the visualizations of the audio waveform.

Show Stats

Use the Show Stats link to display Audio Processing Statistics of a production.

Show Input Track(s)

Click Show Input to show or hide input track(s) of a production: now you can see and listen to input and output files for a detailed comparison. Please click directly on the waveform to switch/unmute a track - muted tracks are grayed out slightly:

Showing four input tracks and the Auphonic output of a multitrack production.

Please click on the fullscreen button (bottom right) to switch to fullscreen mode.
Now the audio tracks use all available screen space to see all waveform details:

A multitrack production with output and all input tracks in fullscreen mode.
Please click on the screenshot to see it in full resolution.

In fullscreen mode, it’s also possible to control playback and zooming with keyboard shortcuts:
Press [Space] to start/pause playback, use [+] to zoom in and [-] to zoom out.

Singletrack Algorithms Inspector

First, we discuss the analysis data of our Singletrack Post Production Algorithms.

The audio levels of output and input files, measured according to the ITU-R BS.1770 specification, are displayed directly as the audio waveform. Click on Show Input to see the input and output file. Only one file is played at a time, click directly on the Input or Output track to unmute a file for playback:

Singletrack Production with opened input file.
See the first Leveler Audio Example to try the audio inspector yourself.

Waveform Segments: Music and Speech (gold, blue)

Music/Speech segments are displayed directly in the audio waveform: Music segments are plotted in gold/yellow, speech segments in blue (or light/dark blue).

Waveform Segments: Leveler High/No Amplification (dark, light blue)

Speech segments can be displayed in normal, dark or light blue: Dark blue means that the input signal was very quiet and contains speech, therefore the Adaptive Leveler has to use a high amplification value in this segment.
In light blue regions, the input signal was very quiet as well, but our classifiers decided that the signal should not be amplified (breathing, noise, background sounds, etc.).

Yellow/orange background segments display leveler fades.

Background Segments: Leveler Fade Up/Down (yellow, orange)

If the volume of an input file changes in a fast way, the Adaptive Leveler volume curve will increase/decrease very fast as well (= fade) and should be placed in speech pauses. Otherwise, if fades are too slow or during active speech, one will hear pumping speech artifacts.
Exact fade regions are plotted as yellow (fade up, volume increase) and orange (fade down, volume decrease) background segments in the audio inspector.

Horizontal red lines display noise and hum reduction profiles.

Horizontal Lines: Noise and Hum Reduction Profiles (red)

Our Noise and Hiss Reduction and Hum Reduction algorithms segment the audio file in regions with different background noise characteristics, which are displayed as red horizontal lines in the audio inspector (top lines for noise reduction, bottom lines for hum reduction).
Then a noise print is extracted in each region and a classifier decides if and how much noise reduction is necessary - this is plotted as a value in dB below the top red line.
The hum base frequency (50Hz or 60Hz) and the strength of all its partials is also classified in each region, the value in Hz above the bottom red line indicates the base frequency and whether hum reduction is necessary or not (no red line).

You can try the singletrack audio inspector yourself with our Leveler, Noise Reduction and Hum Reduction audio examples.

Multitrack Algorithms Inspector

If our Multitrack Post Production Algorithms are used, additional analysis data is shown in the audio inspector.

The audio levels of the output and all input tracks are measured according to the ITU-R BS.1770 specification and are displayed directly as the audio waveform. Click on Show Input to see all the input files with track labels and the output file. Only one file is played at a time, click directly into the track to unmute a file for playback:

Input Tracks: Waveform Segments, Background Segments and Horizontal Lines

Input tracks are displayed below the output file including their track names. The same data as in our Singletrack Algorithms Inspector is calculated and plotted separately in each input track:

• Waveform Segments with different colors: Music and Speech Segments (gold, blue), Leveler High/No Amplification (dark blue, light blue)
• Background Segments: Leveler Fade Up/Down (yellow, orange)
• Horizontal Lines: Noise and Hum Reduction Profiles Noise and Hum Reduction Profiles (red)

Output Waveform Segments: Multiple Speakers and Music

Each speaker is plotted in a separate, blue-like color - in the example above we have 3 speakers (normal, light and dark blue) and you can see directly in the waveform when and which speaker is active.
Audio from music input tracks are always plotted in gold/yellow in the output waveform, please try to not mix music and speech parts in music tracks (see also Multitrack Best Practice)!

You can try the multitrack audio inspector yourself with our Multitrack Audio Inspector Example or our general Multitrack Audio Examples.

Ducking, Background and Foreground Segments

Music tracks can be set to Ducking, Foreground, Background or Auto - for more details please see Automatic Ducking, Foreground and Background Tracks.

Ducking Segments (light, dark orange)

In Ducking, the level of a music track is reduced if one of the speakers is active, which is plotted as a dark orange background segment in the output track.
Foreground music parts, where no speaker is active and the music track volume is not reduced, are displayed as light orange background segments in the output track.

Background Music Segments (dark orange background)

Here the whole music track is set to Background and won’t be amplified when speakers are inactive.
Background music parts are plotted as dark organge background segments in the output track.

Foreground Music Segments (light orange background)

Here the whole music track is set to Foreground and its level won’t be reduced when speakers are active.
Foreground music parts are plotted as light organge background segments in the output track.

You can try the ducking/background/foreground audio inspector yourself: Fore/Background/Ducking Audio Examples.

Audio Search, Chapters Marks and Video

Audio Search and Transcriptions

If our Automatic Speech Recognition Integration is used, a time-aligned transcription text will be shown above the waveform. You can use the search field to search and seek directly in the audio file.
See our Speech Recognition Audio Examples to try it yourself.

Chapters Marks

Chapter Mark start times are displayed in the audio waveform as black vertical lines.
The current chapter title is written above the waveform - see “This is Chapter 2” in the screenshot above.

A video production with output waveform, input waveform and transcriptions in fullscreen mode.
Please click on the screenshot to see it in full resolution.

Video Display

If you add a Video Format or Audiogram Output File to your production, the audio inspector will also show a separate video track in addition to the audio output and input tracks. The video playback will be synced to the audio of output and input tracks.

Supported Audio Formats

We use the native HTML5 audio element for playback and the aurora.js javascript audio decoders to support all common audio formats:

WAV, MP3, AAC/M4A and Opus

These formats are supported in all major browsers: Firefox, Chrome, Safari, Edge, iOS Safari and Chrome for Android.

FLAC

FLAC is supported in Firefox, Chrome, Edge and Chrome for Android - see FLAC audio format.
In Safari and iOS Safari, we use aurora.js to directly decode FLAC files in javascript, which works but uses much more CPU compared to native decoding!

ALAC

ALAC is not supported by any browser so far, therefore we use aurora.js to directly decode ALAC files in javascript. This works but uses much more CPU compared to native decoding!

Ogg Vorbis

Only supported by Firefox, Chrome and Chrome for Android - for details please see Ogg Vorbis audio format.

We suggest to use a recent Firefox or Chrome browser for best performance.
Decoding FLAC and ALAC files also works in Safari and iOS with the help of aurora.js, but javascript decoders need a lot of CPU and they sometimes have problems with exact scrolling and seeking.

Please see our blog post Audio File Formats and Bitrates for Podcasts for more details about audio formats.

Mobile Audio Inspector

Multiple responsive layouts were created to optimize the screen space usage on Android and iOS devices, so that the audio inspector is fully usable on mobile devices as well: tap into the waveform to set the playhead location, scroll horizontally to scroll waveforms, scroll vertically to scroll between tracks, use zoom gestures to zoom in/out, etc.

Unfortunately the fullscreen mode is not available on iOS devices (thanks to Apple), but it works on Android and is a really great way to inspect everything using all the available screen space:

Audio inspector in horizontal fullscreen mode on Android.

Conclusion

Try the Auphonic Audio Inspector yourself: take a look at our Audio Example Page or play with the Multitrack Audio Inspector Example.

The Audio Inspector will be shown in all productions which are created in our Web Service.
It might be used to manually check production result/input files and to send us detailed feedback about audio processing results.

Please let us know if you have some feedback or questions - more visualizations will be added in future!

Back in late 2016, we introduced Speech Recognition at Auphonic. This allows our users to create transcripts of their recordings, and more usefully, this means podcasts become searchable.
Now we integrated two more speech recognition engines: Amazon Transcribe and Speechmatics. Whilst integrating these services, we also took the opportunity to develop a complete new Transcription Editor:

Screenshot of our Transcript Editor with word confidence highlighting and the edit bar.
Try out the Transcript Editor Examples yourself!

The new Auphonic Transcript Editor is included directly in our HTML transcript output file, displays word confidence values to instantly see which sections should be checked manually, supports direct audio playback, HTML/PDF/WebVTT export and allows you to share the editor with someone else for further editing.

The new services, Amazon Transcribe and Speechmatics, offer transcription quality improvements compared to our other integrated speech recognition services.
They also return word confidence values, timestamps and some punctuation, which is exported to our output files.

The Auphonic Transcript Editor

With the integration of the two new services offering improved recognition quality and word timestamps alongside confidence scores, we realized that we could leverage these improvements to give our users easy-to-use transcription editing.
Therefore we developed a new, open source transcript editor, which is embedded directly in our HTML output file and has been designed to make checking and editing transcripts as easy as possible.

• Edit the transcription directly in the HTML document.
• Show/hide word confidence, to instantly see which sections should be checked manually (if you use Amazon Transcribe or Speechmatics as speech recognition engine).
• Listen to audio playback of specific words directly in the HTML editor.
• Share the transcript editor with others: as the editor is embedded directly in the HTML file (no external dependencies), you can just send the HTML file to some else to manually check the automatically generated transcription.
• Export the edited transcript to HTML, PDF or WebVTT.
• Completely useable on all mobile devices and desktop browsers.

Examples: Try Out the Transcript Editor

Here are two examples of the new transcript editor, taken from our speech recognition audio examples page:

1. Singletrack Transcript Editor Example

Singletrack speech recognition example from the first 10 minutes of Common Sense 309 by Dan Carlin. Speechmatics was used as speech recognition engine without any keywords or further manual editing.

2. Multitrack Transcript Editor Example

A multitrack automatic speech recognition transcript example from the first 20 minutes of TV Eye on Marvel - Luke Cage S1E1. Amazon Transcribe was used as speech recognition engine without any further manual editing.
As this is a multitrack production, the transcript includes exact speaker names as well (try to edit them!).

Transcript Editing

By clicking the Edit Transcript button, a dashed box appears around the text. This indicates that the text is now freely editable on this page. Your changes can be saved by using one of the export options (see below).
If you make a mistake whilst editing, you can simply use the undo/redo function of the browser to undo or redo your changes.

When working with multitrack productions, another helpful feature is the ability to change all speaker names at once throughout the whole transcript just by editing one speaker. Simply click on an instance of a speaker title and change it to the appropriate name, this name will then appear throughout the whole transcript.

Word Confidence Highlighting

Word confidence values are shown visually in the transcript editor, highlighted in shades of red (see screenshot above). The shade of red is dependent on the actual word confidence value: The darker the red, the lower the confidence value. This means you can instantly see which sections you should check/re-work manually to increase the accuracy.

Once you have edited the highlighted text, it will be set to white again, so it’s easy to see which sections still require editing.
Use the button Add/Remove Highlighting to disable/enable word confidence highlighting.

NOTE: Word confidence values are only available in Amazon Transcribe or Speechmatics, not if you use our other integrated speech recognition services!

Audio Playback

The button Activate/Stop Play-on-click allows you to hear the audio playback of the section you click on (by clicking directly on the word in the transcript editor).
This is helpful in allowing you to check the accuracy of certain words by being able to listen to them directly whilst editing, without having to go back and try to find that section within your audio file.

If you use an External Service in your production to export the resulting audio file, we will automatically use the exported file in the transcript editor.
Otherwise we will use the output file generated by Auphonic. Please note that this file is password protected for the current Auphonic user and will be deleted in 21 days.

If no audio file is available in the transcript editor, or cannot be played because of the password protection, you will see the button Add Audio File to add a new audio file for playback.

Export Formats, Save/Share Transcript Editor

Save/Share Editor

The Save Editor button stores the whole transcript editor with all its current changes into a new HTML file. Use this button to save your changes for further editing or if you want to share your transcript with someone else for manual corrections (as the editor is embedded directly in the HTML file without any external dependencies).

Export HTML / Export PDF / Export WebVTT

Use one of these buttons to export the edited transcript to HTML (for WordPress, Word, etc.), to PDF (via the browser print function) or to WebVTT (so that the edited transcript can be used as subtitles or imported in web audio players of the Podlove Publisher or Podigee).
Every export format is rendered directly in the browser, no server needed.

Amazon Transcribe

The first of the two new services, Amazon Transcribe, offers accurate transcriptions in English and Spanish at low costs, including keywords, word confidence, timestamps, and punctuation.

UPDATE 2019:
Amazon Transcribe offers more languages now - please see Amazon Transcribe Features!

Pricing

The free tier offers 60 minutes of free usage a month for 12 months. After that, it is billed monthly at a rate of $0.0004 per second ($1.44/h).
More information is available at Amazon Transcribe Pricing.

Custom Vocabulary (Keywords) Support

Custom Vocabulary (called Keywords in Auphonic) gives you the ability to expand and customize the speech recognition vocabulary, specific to your case (i.e. product names, domain-specific terminology, or names of individuals).
The same feature is also available in the Google Cloud Speech API.

Timestamps, Word Confidence, and Punctuation

Amazon Transcribe returns a timestamp and confidence value for each word so that you can easily locate the audio in the original recording by searching for the text.
It also adds some punctuation, which is combined with our own punctuation and formatting automatically.

The high-quality (especially in combination with keywords) and low costs of Amazon Transcribe make it attractive, despite only currently supporting two languages.
However, the processing time of Amazon Transcribe is much slower compared to all our other integrated services!

Try it yourself:
Connect your Auphonic account with Amazon Transcribe at our External Services Page.

Speechmatics

Speechmatics offers accurate transcriptions in many languages including word confidence values, timestamps, and punctuation.

Many Languages

Speechmatics’ clear advantage is the sheer number of languages it supports (all major European and some Asiatic languages).
It also has a Global English feature, which supports different English accents during transcription.

Timestamps, Word Confidence, and Punctuation

Like Amazon, Speechmatics creates timestamps, word confidence values, and punctuation.

Pricing

Speechmatics is the most expensive speech recognition service at Auphonic.
Pricing starts at £0.06 per minute of audio and can be purchased in blocks of £10 or £100. This equates to a starting rate of about $4.78/h. Reduced rate of £0.05 per minute ($3.98/h) are available if purchasing £1,000 blocks.
They offer significant discounts for users requiring higher volumes. At this further reduced price point it is a similar cost to the Google Speech API (or lower). If you process a lot of content, you should contact them directly at sales@speechmatics.com and say that you wish to use it with Auphonic.
More information is available at Speechmatics Pricing.

Speechmatics offers high-quality transcripts in many languages. But these features do come at a price, it is the most expensive speech recognition services at Auphonic.

Unfortunately, their existing Custom Dictionary (keywords) feature, which would further improve the results, is not available in the Speechmatics API yet.

Try it yourself:
Connect your Auphonic account with Speechmatics at our External Services Page.

What do you think?

Any feedback about the new speech recognition services, especially about the recognition quality in various languages, is highly appreciated.

We would also like to hear any comments you have on the transcript editor particularly - is there anything missing, or anything that could be implemented better?
Please let us know!

We are pleased to announce a new Audio Inserts feature in the Auphonic API: audio inserts are separate audio files (like intros/outros), which will be inserted into your production at a defined offset.
This blog post shows how one can use this feature for Dynamic Ad Insertion and discusses other Audio Manipulation Methods of the Auphonic API.

API-only Feature

For the general podcasting hobbyist, or even for someone producing a regular podcast, the features that are accessible via our web interface are more than sufficient.

However, some of our users, like podcasting companies who integrate our services as part of their products, asked us for dynamic ad insertions. We teamed up with them to develop a way of making this work within the Auphonic API.

We are pleased therefore to announce audio inserts - a new feature that has been made part of our API. This feature is not available through the web interface though, it requires the use of our API.

Before we talk about audio inserts, let's talk about what you need to know about dynamic ad insertion!

Dynamic Ad Insertion

There are two ways of dealing with adverts within podcasts. In the first, adverts are recorded or edited into the podcast and are fixed, or baked in. The second method is to use dynamic insertion, whereby the adverts are not part of the podcast recording/file but can be inserted into the podcast afterwards, at any time.

This second approach would allow you to run new ad campaigns across your entire catalog of shows. As a podcaster this allows you to potentially generate new revenue from your old content.

As a hosting company, dynamic ad insertion allows you to choose up to date and relevant adverts across all the podcasts you host. You can make these adverts relevant by subject or location, for instance.

Your users can define the time for the ads and their podcast episode, you are then in control of the adverts you insert.

Audio Inserts in Auphonic

Whichever approach to adverts you are taking, using audio inserts can help you.

Audio inserts are separate audio files which will be inserted into your main single or multitrack production at your defined offset (in seconds).

When a separate audio file is inserted as part of your production, it creates a gap in the podcast audio file, shifting the audio back by the length of the insert. Helpfully, chapters and other time-based information like transcriptions are also shifted back when an insert is used.

The biggest advantage of this is that Auphonic will apply loudness normalization to the audio insert so, from an audio point of view, it matches the rest of the podcast.

Although created with dynamic ad insertion in mind, this feature can be used for any type of audio inserts: adverts, music songs, individual parts of a recording, etc. In the case of baked-in adverts, you could upload your already processed advert audio as an insert, without having to edit it into your podcast recording using a separate audio editing application.

Please note that audio inserts should already be edited and processed before using them in production. (This is usually the case with pre-recorded adverts anyway). The only algorithm that Auphonic applies to an audio insert is loudness normalization in order to match the loudness of the entire production. Auphonic does not add any other processing (i.e. no leveling, noise reduction etc).

Audio Inserts Coding Example

Here is a brief overview of how to use our API for audio inserts. Be warned, this section is coding heavy, so if this isn't your thing, feel free to move along to the next section!

You can add audio insert files with a call to https://auphonic.com/api/production/{uuid}/multi_input_files.json, where uuid is the UUID of your production.
Here is an example with two audio inserts from an https URL. The offset/position in the main audio file must be given in seconds:

curl -X POST -H "Content-Type: application/json" 
    https://auphonic.com/api/production/{uuid}/multi_input_files.json 
    -u username:password 
    -d '[
            {
                "input_file": "https://mydomain.com/my_audio_insert_1.wav",
                "type": "insert",
                "offset": 20.5
            },
            {
                "input_file": "https://mydomain.com/my_audio_insert_2.wav",
                "type": "insert",
                "offset": 120.3
            }
        ]'

More details showing how to use audio inserts in our API can be seen here.

Additional API Audio Manipulations

In addition to audio inserts, using the Auphonic API offers a number of other audio manipulation options, which are not available via the web interface:

Cut start/end of audio files: See Docs

In Single-track productions, this feature allows the user to cut the start and/or the end of the uploaded audio file. Crucially, time-based information such as chapters etc. will be shifted accordingly.

Fade In/Out time of audio files: See Docs

This allows you to set the fade in/out time (in ms) at the start/end of output files. The default fade time is 100ms, but values can be set between 0ms and 5000ms.
This feature is also available in our Auphonic Leveler Desktop App.

Adding intro and outro: See Docs

Automatically add intros and outros to your main audio input file, as it is also available in our web interface.

Add multiple intros or outros: See Docs

Using our API, you can also add multiple intros or outros to a production. These intros or outros are played in series.

Overlapping intros/outros: See Docs

This feature allows intros/outros to overlap either the main audio or the following/previous intros/outros.

Conclusion

If you haven't explored our API already, the new audio inserts feature allows for greater flexibility and also dynamic ad insertion.
If you offer online services to podcasters, the Auphonic API would also then allow you to pass on Auphonic's audio processing algorithms to your customers.

If this is of interest to you or you have any new feature suggestions that you feel could benefit your company, please get in touch. We are always happy to extend the functionality of our products!

Lots of users have asked us about more customization and control over the sound of our audio algorithms in the past, so today, we have introduced some advanced algorithm parameters for our singletrack version in a private beta program!

• Leveler Presets are basically complete new leveling algorithms
• Maximum Loudness Range (LRA) Target to control the strength of our Leveler
• Maximum True Peak Level
• Better Hum and Noise Reduction Controls

UPDATE Nov. 2018:
We released a complete rework of the Adaptive Leveler parameters and the description here is not valid anymore!
Please see Auphonic Adaptive Leveler Customization (Beta Update)!

Please join our private beta program and let us know how you use these new features or if you need even more control!

Leveler Presets

Our Adaptive Leveler corrects level differences between speakers, between music and speech and will also apply dynamic range compression to achieve a balanced overall loudness. If you don't know about the Leveler yet, take a look at our Audio Examples.

Leveler presets are basically complete new leveling algorithms, which we have been working on in the past few months:
Our current Leveler tries to normalize all speakers to the same loudness. However, in some cases, you might want more or less loudness differences (dynamic range / loudness range) between the speakers and music segments, or more or less compression, etc.
For these use cases, we have developed additional Leveler Presets and the parameter Maximum Loudness Range.

Preset Medium:

This is our current leveling algorithm as demonstrated in the Audio Examples.

Preset Hard:

The hard preset reacts faster and applies more gain and compression compared to the medium preset. It is built for recordings with extreme loudness differences, for example very quiet questions from the audience in a lecture recording, extremely soft and loud voices within one audio track, etc.

Preset Soft:

This preset reacts slower, applies less gain and compression compared to the medium preset. Use it if you want to keep more loudness differences (dynamic narration), if you want your voices to sound "less compressed/processed", for dynamic music (concert/classical recordings), background music, etc.

Preset Softer:

Like soft, but softer :)

Preset Speech Medium, Music Soft:

Uses the medium preset in speech segments and the soft preset in music segments. It is built for music live recordings or dynamic music mixes, where you want to amplify all speakers but keep the loudness differences within and between music segments.

Preset Medium, No Compressor:

Like the medium preset, but only (mid-term) leveling and no (short-term) compression is applied. This preset is optimal if you just use a Maximum Loudness Range Target and want to avoid any additional compression as much as possible.

Maximum Loudness Range (LRA) Target

The loudness range (LRA) indicates the variation of loudness over the course of a program and is measured in LU (loudness units) - for more details see Loudness Measurement and Normalization or EBU Tech 3342.

The parameter Max Loudness Range controls how much leveling is applied:
volume changes of our Adaptive Leveler will be restricted so that the loudness range of the output file is below the selected value.
High loudness range values will result in very dynamic output files, low loudness range values in compressed output audio. If the LRA value of your input file is already below the maximum loudness range value, no leveling at all will be applied.

It is also important which Leveler Preset you select, for example, if you use the soft(er) preset, it won't be possible to achieve very low loudness range targets.

Also, the Max Loudness Range parameter is not such a precise target value as the Loudness Target. The LRA of your output file might be off a few LU, as it is not reasonable to reach the exact target value.

Use Cases: The Maximum LRA parameter allows you to control the strength of our leveling algorithms, in combination with the parameter Leveler Preset. This might be used for automatic mixdowns with different LRA values for different target platforms (very compressed ones like mobile devices or Alexa, very dynamic ones like home cinema, etc.).

Maximum True Peak Level

This parameter sets the maximum allowed true peak level of the processed output file, which is controlled by the True Peak Limiter after our Global Loudness Normalization algorithms.

If set to Auto (which is the current default), a reasonable value according to the selected loudness target is used: -1dBTP for 23 LUFS (EBU R128) and higher, -2dBTP for -24 LUFS (ATSC A/85) and lower loudness targets.

The maximum true peak level parameter is already available in our desktop program.

Better Hum and Noise Reduction Controls

Hum Base Frequency:

Set the hum base frequency to 50Hz or 60Hz (if you know it), or use Auto to automatically detect the hum base frequency in each speech region.

Hum Reduction Amount:

Maximum hum reduction amount in dB, higher values remove more noise.
In Auto mode, a classifier decides how much hum reduction is necessary in each speech region. Set it to a custom value (> 0), if you prefer more hum reduction or want to bypass our classifier. Use Disable Dehum to disable hum reduction and use our noise reduction algorithms only.

Behavior of noise and hum reduction parameter combinations:

Advanced Parameters Private Beta and Feedback

At the moment the advanced algorithm parameters are for beta users only. This is to allow us to get user feedback, so we can change the parameters to suit user needs.
Please let us know your case studies, if you need any other algorithm parameters or if you have any questions!

Here are some private beta invitation codes:

y6KCBI4yo0 ksIFEsmI1y BDZec2a21V i4XRGLlVm2 0UDxuS0vbu aaBxi35sKN aaiDSZUbmY bu8lPF80Ih eMsSl6Sf8K DaWpsUnyjo
2YM00m8zDW wh7K2pPmSa jCX7mMy2OJ ZGvvhzCpTF HI0lmGhjVO eXqVhN6QLU t4BH0tYcxY LMjQREVuOx emIogTCAth 0OTPNB7Coz
VIFY8STj2f eKzRSWzOyv 40cMMKKCMN oBruOxBkqS YGgPem6Ne7 BaaFG9I1xZ iSC0aNXoLn ZaS4TykKIa l32bTSBbAx xXWraxS40J
zGtwRJeAKy mVsx489P5k 6SZM5HjkxS QmzdFYOIpf 500AHHtEFA 7Kvk6JRU66 z7ATzwado6 4QEtpzeKzC c9qt9Z1YXx pGSrDzbEED
MP3JUTdnlf PDm2MOLJIG 3uDietVFSL 1i7jZX0Y9e zPkSgmAqqP 5OhcmHIZUP E0vNsPxZ4s FzTIyZIG2r 5EywA0M7r5 FMhpcFkVN5
oRLbRGcRmI 2LTh8GlN7h Cjw6Z3cveP fayCewjE55 GbkyX89Lxu 4LpGZGZGgc iQV7CXYwkH pGLyQPgaha e3lhKDRUMs Skrei1tKIa

If you have an invitation code, you can enter it here to activate the advanced audio algorithm parameters:
Auphonic Algorithm Parameters Private Beta Activation

Last weekend, at the Subscribe10 conference, we released Advanced Audio Algorithm Parameters for Multitrack Productions:

We launched our advanced audio algorithm parameters for Singletrack Productions last year. Now these settings (and more) are available for Multitrack Algorithms as well, which gives you detailed control for each track of your production.

• Fore/Background Settings: keep your music/clip tracks unchanged and set a custom background gain
• Multitrack Leveler Parameters: control the stereo panorama, leveling algorithm, dynamic range and compression
• Better Hum and Noise Reduction Controls for each track
• Maximum True Peak Level setting for the final mixdown
• Full API Support

Please join our private beta program and let us know how you use these new features or if you need even more control!

Fore/Background Settings

The parameter Fore/Background controls whether a track should be in foreground, in background, ducked, or unchanged, which is especially important for music or clip tracks.
For more details, please see Automatic Ducking, Foreground and Background Tracks .

Unchanged (Foreground):

We sometimes received complaints from users, which produced very complex music or clip tracks, that Auphonic changes the levels too hard.
If you set the parameter Fore/Background to the new option Unchanged (Foreground), Level relations within this track won’t be changed at all. It will be added to the final mixdown so that foreground/solo parts of this track will be as loud as (foreground) speech from other tracks.

Background Level:

It is now possible to set the level of background segments/tracks (compared to foreground segments) in background and ducking tracks. By default, background and ducking segments are 18dB softer than foreground segments.

Leveler Parameters

Similar to our Singletrack Advanced Leveler Parameters (see this previous blog post), we also released leveling parameters for Multitrack Productions now.
The following advanced parameters for our Multitrack Adaptive Leveler can be set for each track and allow you to customize which parts of the audio should be leveled, how much they should be leveled, how much dynamic range compression should be applied and to set the stereo panorama (balance):

Leveler Preset:

Select the Speech or Music Leveler for this track.
If set to Automatic (default), a classifier will decide if this is a music or speech track.

Dynamic Range:

The parameter Dynamic Range controls how much leveling is applied: Higher values result in more dynamic output audio files (less leveling). If you want to increase the dynamic range by 3dB (or LU), just increase the Dynamic Range parameter by 3dB.
For more details, please see Multitrack Leveler Parameters.

Compressor:

Select a preset for Micro-Dynamics Compression: Auto, Soft, Medium, Hard or Off.
The Compressor adjusts short-term dynamics, whereas the Leveler adjusts mid-term level differences.
For more details, please see Multitrack Leveler Parameters.

Stereo Panorama (Balance):

Change the stereo panorama (balance for stereo input files) of the current track.
Possible values: L100, L75, L50, L25, Center, R25, R50, R75 and R100.

If you understand German and want to know more about our Advanced Leveler Parameters and audio dynamics in general, watch our talk at the Subscribe10 conference:
Video: Audio Lautheit und Dynamik.

Better Hum and Noise Reduction Controls

Noise Reduction Amount:

Maximum noise and hum reduction amount in dB, higher values remove more noise.
In Auto mode, a classifier decides if and how much noise reduction is necessary (to avoid artifacts). Set to a custom (non-Auto) value if you prefer more noise reduction or want to bypass our classifier.

Hum Base Frequency:

Set the hum base frequency to 50Hz or 60Hz (if you know it), or use Auto to automatically detect the hum base frequency in each speech region.

Hum Reduction Amount:

Maximum hum reduction amount in dB, higher values remove more noise.
In Auto mode, a classifier decides how much hum reduction is necessary in each speech region. Set it to a custom value (> 0), if you prefer more hum reduction or want to bypass our classifier. Use Disable Dehum to disable hum reduction and use our noise reduction algorithms only.

Behavior of noise and hum reduction parameter combinations:

Maximum True Peak Level

In the Master Algorithm Settings of your multitrack production, you can set the maximum allowed true peak level of the processed output file, which is controlled by the True Peak Limiter after our Loudness Normalization algorithms.

If set to Auto (which is the current default), a reasonable value according to the selected loudness target is used: -1dBTP for 23 LUFS (EBU R128) and higher, -2dBTP for -24 LUFS (ATSC A/85) and lower loudness targets.

Full API Support

All advanced algorithm parameters, for Singletrack and Multitrack Productions, are available in our API as well, which allows you to integrate them into your scripts, external workflows and third-party applications.

Join the Beta and Send Feedback

Please join our beta and let us know your case studies, if you need any other algorithm parameters or if you have any questions!

Here are some private beta invitation codes:

8tZPc3T9pH VAvO8VsDg9 0TwKXBW4Ni kjXJMivtZ1 J9APmAAYjT Zwm6HabuFw HNK5gF8FR5 Do1MPHUyPW CTk45VbV4t xYOzDkEnWP
9XE4dZ0FxD 0Sl3PxDRho uSoRQxmKPx TCI62OjEYu 6EQaPYs7v4 reIJVOwIr8 7hPJqZmWfw kti3m5KbNE GoM2nF0AcN xHCbDC37O5
6PabLBRm9P j2SoI8peiY olQ2vsmnfV fqfxX4mWLO OozsiA8DWo weJw0PXDky VTnOfOiL6l B6HRr6gil0 so0AvM1Ryy NpPYsInFqm
oFeQPLwG0k HmCOkyaX9R G7DR5Sc9Kv MeQLSUCkge xCSvPTrTgl jyQKG3BWWA HCzWRxSrgW xP15hYKEDl 241gK62TrO Q56DHjT3r4
9TqWVZHZLE aWFMSWcuX8 x6FR5OTL43 Xf6tRpyP4S tDGbOUngU0 5BkOF2I264 cccHS0KveO dT29cF75gG 2ySWlYp1kp iJWPhpAimF

If you have an invitation code, you can enter it here to activate the Multitrack Advanced Audio Algorithm Parameters:
Auphonic Algorithm Parameters Private Beta Activation

I love paddling on the Horsetooth Reservoir in cold season. Boat ramps are closed, no power boat traffic, usually quiet and calm. Snow and ice can enhance scenery. A great time to paddle, train, relax or photograph. The Horsetooth stays […]

If you have your visa refused or cancelled, you need to get expert advice a soon as possible. Strict time limits apply to drafting submissions and appeals. A visa refusal or cancellation can limit the type or visas you can apply for in the future or even prohibit you from applying for any visa to […]

The post What happens if my visa is refused or cancelled due to my character? appeared first on Visa Australia - Immigration Lawyers & Registered Migration Agents.

In late 2019 the Australian Government launched the Global Talent – Independent program which offers a streamlined, priority visa pathway for highly skilled and talented individuals to work and live permanently in Australia. There are two streams. The first is the Global Talent Independent Program (GTI) and the second is the Global Talent Employer Sponsored (GTES). […]

The post Australia’s global talent visa for individuals and businesses appeared first on Visa Australia - Immigration Lawyers & Registered Migration Agents.

Seasonal Worker Programme and Pacific Labour Scheme workers can extend their stay for up to 12 months to work for approved employers as long as pastoral care and accommodation needs of workers are met to minimise health risks to visa holders and the community. Approved employers under the Seasonal Worker Programme and Pacific Labour Scheme […]

The post What can I do if I am on a working holiday or seasonal worker visa in the Coronavirus (COVID-19) crisis? appeared first on Visa Australia - Immigration Lawyers & Registered Migration Agents.

Great news for the users of Presence — our multipurpose theme. We have finally released the long-awaited 2.0 version, which features major changes and improvements. What’s new in Presence 2.0? Beaver Builder Integration Dark Skin New Demo: Organic Shop New Typography and Colors options in the Customizer New Templates in Page Builder Beaver Builder Integration If you have followed recent […]

The Premium BlogStarter Theme gives a new spin to one of our more popular magazine style themes The Original BlogStarter Theme. The Premium BlogStarter Theme is SEO optimized, bursting with theme options and widgets, includes a easy customizable logo, multi level drop down menus and more.

The post Released: Premium BlogStarter Theme appeared first on WP Theme Designer.

We've read so many sad stories about communities that were fatally compromised or destroyed due to security exploits. We took that lesson to heart when we founded the Discourse project; we endeavor to build open source software that is secure and safe for communities by default, even if there are

I didn't choose to be a programmer. Somehow, it seemed, the computers chose me. For a long time, that was fine, that was enough; that was all I needed. But along the way I never felt that being a programmer was this unambiguously great-for-everyone career field with zero downsides. There

Remember "cybersecurity"?

Mysterious hooded computer guys doing mysterious hooded computer guy .. things! Who knows what kind of naughty digital mischief they might be up to?

Unfortunately, we now live in a world where this kind of digital mischief is literally rewriting the world's history. For proof of that,

When we started Discourse in 2013, our server requirements were high:

• 1GB RAM
• modern, fast dual core CPU
• speedy solid state drive with 20+ GB

I'm not talking about a cheapo shared cpanel server, either, I mean a dedicated virtual private server with those specifications.

We were OK with that,

When I wrote about App-pocalypse Now in 2014, I implied the future still belonged to the web. And it does. But it's also true that the web has changed a lot in the last 10 years, much less the last 20 or 30.

Websites have gotten a lot … fatter.

While

In an electric car, the (enormous) battery is a major part of the price. If electric car prices are decreasing, battery costs must be decreasing, because it's not like the cost of fabricating rubber, aluminum, glass, and steel into car shapes can decline that much, right?

On an electric scooter

This post outlines the steps I took to create a block-based theme version of Twenty Twenty. Thanks to Kjell Reigstad for helping develop the theme and write this post. There’s been a lot of conversation around how theme development changes as Full Site Editing using Gutenberg becomes a reality. Block templates are an experimental feature … Continue reading "Creating a Block-based Theme Using Block Templates"

We recently completed a full rebrand and website design project for Enterprise High School, a charter school located in Clearwater,...continue reading

We recently launched a redesigned website for Jeff Wilson Pool Service in Naples, Florida to continue to expand on their...continue reading

The Cheese Monkeys is the coming of age story of a teen boy (who we only know by his nickname, “Happy”.) As he enters a midwest state school to study art in the late 50’s. First off, I’ll admit that I’m a fan of coming of age stories. All the good ones usually follow a protagonist who […]

Refresh Seattle – February 2014 First off, what is Refresh? According to their website… Refresh Seattle is a community of designers and developers working to refresh the creative, technical, and professional culture of New Media endeavors in the Seattle/Puget Sound area. Promoting design, technology, usability, and standards, Refresh Seattle is a part of Refresh and […]

It says it right there in my Twitter bio, I am a Sex Geek. It’s a term that was coined and made popular by renowned sex educator Reid Mihalko and I’ve been one since before there even WAS a term for it. A Sex Geek is much like a geek of any other flavor. Geekiness […]

https://wasm.joway.io/

https://www.smashingmagazine.com/2020/05/vue-survey-app-firebase-authentication-database/

https://www.underconsideration.com/brandnew/archives/new_logo_for_noise.php

https://aralroca.com/blog/opencv-in-the-web

We all know about the new coronavirus that has been affecting hundreds of thousands of people worldwide. And while scientists, researchers, and doctors are all working tirelessly to find a cure for this terrible disease, one thing is for sure: staying home is saving lives. The greatest tool that we have right now to help […]

Read More at Check Out These Famous Logos Practicing Social Distancing – McDonald’s, Mercedes, and More

Suicide attempts common in post-concussion patients, says Dr. Charles Tator of the Canadian Concussion Centre

In the years since he had returned from Vietnam, Elmer “Snubby” Burket was a self-described workaholic, raising a son, keeping up his house and always taking jobs where he could be by himself as he tried to put the war behind him.

Even light exercise can counter the damage of stroke in survivors, a new study suggests.

There will be Purple Hearts awarded to troops injured during the Jan. 8 Iranian missile barrage on the al-Asad airbase in Iraq, a defense official told Military Times.