Who built this ripped, anatomically graphic snowman? Is there a world of snowmen offscreen waiting to be turned into sex objects for widows?

Ghost dads are so embarrassing.

Can we trust whatever is going on with Becky Minkoff?

Ronnie O'Sullivan has agreed to compete in new snooker events.

Mike Tyson has not fought professionally since suffering a stoppage defeat to Kevin McBride in 2005.

Joe Marler discussed his recent comments about the Haka, which sparked backlash.

There has been another shock at the Grand Slam of Darts.

Match of the Day presenter Gary Lineker has sealed a new agreement with the BBC just hours after his exit was confirmed.

PGMOL chief Howard Webb has responded after referee David Coote was suspended for comments he appeared to make in a video.

Emma Raducanu struck a deal to return to one of her favourite tournaments.

Former FIA race director Niels Wittich has rejected the motorsport governing body's version regarding his departure.

At ICRA 2024, Spectrum editor Evan Ackerman sat down with Unitree founder and CEO Xingxing Wang and Tony Yang, VP of Business Development, to talk about the company’s newest humanoid, the G1 model.

Smaller, more flexible, and elegant, the G1 robot is designed for general use in service and industry, and is one of the cheapest—if not the cheapest—of a new wave of advanced AI humanoid robots.

Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.

ICRA@40: 23–26 September 2024, ROTTERDAM, NETHERLANDS

IROS 2024: 14–18 October 2024, ABU DHABI, UAE

ICSR 2024: 23–26 October 2024, ODENSE, DENMARK

Cybathlon 2024: 25–27 October 2024, ZURICH

Enjoy today’s videos!

Researchers at the Max Planck Institute for Intelligent Systems and ETH Zurich have developed a robotic leg with artificial muscles. Inspired by living creatures, it jumps across different terrains in an agile and energy-efficient manner.

[ Nature ] via [ MPI ]

Thanks, Toshi!

ETH Zurich researchers have now developed a fast robotic printing process for earth-based materials that does not require cement. In what is known as “impact printing,” a robot shoots material from above, gradually building a wall. On impact, the parts bond together, and very minimal additives are required.

[ ETH Zurich ]

How could you not be excited to see this happen for real?

[ arXiv paper ]

Can we all agree that sanding, grinding, deburring, and polishing tasks are really best done by robots, for the most part?

[ Cohesive Robotics ]

Thanks, David!

Using doors is a longstanding challenge in robotics and is of significant practical interest in giving robots greater access to human-centric spaces. The task is challenging due to the need for online adaptation to varying door properties and precise control in manipulating the door panel and navigating through the confined doorway. To address this, we propose a learning-based controller for a legged manipulator to open and traverse through doors.

[ arXiv paper ]

Isaac is the first robot assistant that’s built for the home. And we’re shipping it in fall of 2025.

Fall of 2025 is a long enough time from now that I’m not even going to speculate about it.

[ Weave Robotics ]

By patterning liquid metal paste onto a soft sheet of silicone or acrylic foam tape, we developed stretchable versions of conventional rigid circuits (like Arduinos). Our soft circuits can be stretched to over 300% strain (over 4x their length) and are integrated into active soft robots.

[ Science Robotics ] via [ Yale ]

NASA’s Curiosity rover is exploring a scientifically exciting area on Mars, but communicating with the mission team on Earth has recently been a challenge due to both the current season and the surrounding terrain. In this Mars Report, Curiosity engineer Reidar Larsen takes you inside the uplink room where the team talks to the rover.

[ NASA ]

I love this and want to burn it with fire.

[ Carpentopod ]

Very often, people ask us what Reachy 2 is capable of, which is why we’re showing you the manipulation possibilities (through teleoperation) of our technology. The robot shown in this video is the Beta version of Reachy 2, our new robot coming very soon!

[ Pollen Robotics ]

The Scalable Autonomous Robots (ScalAR) Lab is an interdisciplinary lab focused on fundamental research problems in robotics that lie at the intersection of robotics, nonlinear dynamical systems theory, and uncertainty.

[ ScalAR Lab ]

Astorino is a 6-axis educational robot created for practical and affordable teaching of robotics in schools and beyond. It has been created with 3D printing, so it allows for experimentation and the possible addition of parts. With its design and programming, it replicates the actions of #KawasakiRobotics industrial robots, giving students the necessary skills for future work.

[ Astorino ]

I guess fish-fillet-shaping robots need to exist because otherwise customers will freak out if all their fish fillets are not identical, or something?

[ Flexiv ]

Watch the second episode of the ExoMars Rosalind Franklin rover mission—Europe’s ambitious exploration journey to search for past and present signs of life on Mars. The rover will dig, collect, and investigate the chemical composition of material collected by a drill. Rosalind Franklin will be the first rover to reach a depth of up to two meters below the surface, acquiring samples that have been protected from surface radiation and extreme temperatures.

[ ESA ]

When we think of grasping robots, we think of manipulators of some sort on the ends of arms of some sort. Because of course we do—that’s how (most of us) are built, and that’s the mindset with which we have consequently optimized the world around us. But one of the great things about robots is that they don’t have to be constrained by our constraints, and at ICRA@40 in Rotterdam this week, we saw a novel new Thing: a robotic hand that can detach from its arm and then crawl around to grasp objects that would be otherwise out of reach, designed by roboticists from EPFL in Switzerland.

Fundamentally, robot hands and crawling robots share a lot of similarities, including a body along with some wiggly bits that stick out and do stuff. But most robotic hands are designed to grasp rather than crawl, and as far as I’m aware, no robotic hands have been designed to do both of those things at the same time. Since both capabilities are important, you don’t necessarily want to stick with a traditional grasping-focused hand design. The researchers employed a genetic algorithm and simulation to test a bunch of different configurations in order to optimize for the ability to hold things and to move.

You’ll notice that the fingers bend backwards as well as forwards, which effectively doubles the ways in which the hand (or, “Handcrawler”) can grasp objects. And it’s a little bit hard to tell from the video, but the Handcrawler attaches to the wrist using magnets for alignment along with a screw that extends to lock the hand into place.

“Although you see it in scary movies, I think we’re the first to introduce this idea to robotics.” —Xiao Gao, EPFL

The whole system is controlled manually in the video, but lead author Xiao Gao tells us that they already have an autonomous version (with external localization) working in the lab. In fact, they’ve managed to run an entire grasping sequence autonomously, with the Handcrawler detaching from the arm, crawling to a location the arm can’t reach, picking up an object, and then returning and reattaching itself to the arm again.

I’ve been reviewing robot vacuums for more than a decade, and robot mops for just as long. It’s been astonishing how the technology has evolved, from the original iRobot Roomba bouncing off of walls and furniture to robots that use lidar and vision to map your entire house and intelligently keep it clean.

As part of this evolution, cleaning robots have become more and more hands-off, and most of them are now able to empty themselves into occasionally enormous docks with integrated vacuums and debris bags. This means that your robot can vacuum your house, empty itself, recharge, and repeat this process until the dock’s dirt bag fills up.

But this all breaks down when it comes to robots that both vacuum and mop. Mopping, which is a capability that you definitely want if you have hard floors, requires a significant amount of clean water and generates an equally significant amount of dirty water. One approach is to make docks that are even more enormous—large enough to host tanks for clean and dirty water that you have to change out on a weekly basis.

SwitchBot, a company that got its start with a stick-on robotic switch that can make dumb things with switches into smart things, has been doing some clever things in the robotic vacuum space as well, and we’ve been taking a look at the SwitchBot S10, which hooks up to your home plumbing to autonomously manage all of its water needs. And I have to say, it works so well that it feels inevitable: this is the future of home robots.

A Massive Mopping Vacuum

The giant dock can collect debris from the robot for months, and also includes a hot air dryer for the roller mop.Evan Ackerman/IEEE Spectrum

The SwitchBot S10 is a hybrid robotic vacuum and mop that uses a Neato-style lidar system for localization and mapping. It’s also got a camera on the front to help it with obstacle avoidance. The mopping function uses a cloth-covered spinning roller that adds clean water and sucks out dirty water on every rotation. The roller lifts automatically when the robot senses that it’s about to move onto carpet. The S10 comes with a charging dock with an integrated vacuum and dust collection system, and there’s also a heated mop cleaner underneath, which is a nice touch.

I’m not going to spend a lot of time analyzing the S10’s cleaning performance. From what I can tell, it does a totally decent job vacuuming, and the mopping is particularly good thanks to the roller mop that exerts downward pressure on the floor while spinning. Just about any floor cleaning robot is going to do a respectable job with the actual floor cleaning—it’s all the other stuff, like software and interface and ease of use, that have become more important differentiators.

Home Plumbing Integration

The water dock, seen here hooked up to my toilet and sink, exchanges dirty water out of the robot and includes an option to add cleaning fluid.Evan Ackerman/IEEE Spectrum

The S10’s primary differentiator is that it integrates with your home plumbing. It does this through a secondary dock—there’s the big charging dock, which you can put anywhere, and then the much smaller water dock, which is small enough to slide underneath an average toe-kick in a kitchen.

The dock includes a pumping system that accesses clean water through a pressurized water line, and then squirts dirty water out into a drain. The best place to find this combination of fixtures is near a sink with a p-trap, and if this is already beyond the limits of your plumbing knowledge, well, that’s the real challenge with the S10. The S10 is very much not plug-and-play; to install the water dock, you should be comfortable with basic tool use and, more importantly, have some faith in the integrity of your existing plumbing.

My house was built in the early 1960s, which means that a lot of my plumbing consists of old copper with varying degrees of corrosion and mineral infestation, along with slightly younger but somewhat brittle PVC. Installing the clean water line for the dock involves temporarily shutting off the cold water line feeding a sink or a toilet—that is, turning off a valve that may not have been turned for a decade or more. This is risky, and the potential consequences of any uncontrolled water leak are severe, so know where your main water shutoff is before futzing with the dock installation.

To SwitchBot’s credit, the actual water dock installation process was very easy, thanks to a suite of connectors and adapters that come included. I installed my dock in between a toilet and a pedestal sink, with access to the toilet’s water valve for clean water and the sink’s p-trap for dirty water. The water dock is battery powered, and cleverly charges from the robot itself, so it doesn’t need a power outlet. Even so, this one spot was pretty much the only place in my entire house where the water dock could easily go: my other bathrooms have cabinet sinks, which would have meant drilling holes for the water lines, and neither of them had floor space where the dock could live without being kicked all the time. It’s not like the water dock is all that big, but it really needs to be out of the way, and it can be hard to find a compatible space.

Mediocre Mapping

With the dock set up, the next step is mapping. The mapping process with the S10 was a bit finicky. I spent a bunch of time prepping my house—that is, moving as much furniture as possible off of the floor to give the robot the best chance at making a solid map. I know this isn’t something that most people probably do for their robots, but knowing robots like I do, I figure that getting a really good map is worth the hassle in the long run.

The first mapping run completed in about 20 minutes, but the robot got “stuck” on the way back to its dock thanks to a combination of a bit of black carpet and black coffee table legs. I rescued it, but it promptly forgot its map, and I had to start again. The second time, the robot failed to map my kitchen, dining room, laundry room, and one bathroom by not going through a wide open doorway off of the living room. This was confusing, because I could see the unexplored area on the map, and I’m not sure why the robot decided to call it a day rather than investigating that pretty obvious frontier region.

SwitchBot is not terrible at mapping, but it’s definitely sub-par relative to the experiences that I’ve had with older generations of other robots. The S10 also intermittently freaked out on the black patterned carpet that I have: moving very cautiously, spinning in circles, and occasionally stopping completely while complaining about malfunctioning cliff sensors, presumably because my carpet was absorbing all of the infrared from its cliff sensors while it was trying to map.

Black carpet, terror of robots everywhere.Evan Ackerman/IEEE Spectrum

Part of my frustration here is that I feel like I should be able to tell the robot “it’s a black carpet in that spot, you’re fine,” rather than taking such drastic measures as taping over all of the cliff sensors with tin foil, which I’ve had to do on occasion. And let me tell you how overjoyed I was to discover that the S10’s map editor has that exact option. You can also segment rooms by hand, and even position furniture to give the robot a clue on what kind of obstacles to expect. What’s missing is some way of asking the robot to explore a particular area over again, which would have made the initial process a lot easier.

Would a smarter robot be able to figure out all of this stuff on its own? Sure. But robots are dumb, and being able to manually add carpets and furniture and whatnot is an incredibly useful feature, I just wish I could do that during the mapping run somehow instead of having to spend a couple of hours getting that first map to work. Oh well.

How the SwitchBot S10 Cleans

When you ask the S10 to vacuum and mop, it leaves its charging dock and goes to the water dock. Once it docks there, it will extract any dirty water, clean its roller mop, extract the dirty water, wash its filter, and then finally refill itself with clean water before heading off to start mopping. It may do this several times over the course of a cleaning run, depending on how much water you ask it to use, but it’s quite good at managing all of this by itself. If you would like your floor to be extra clean, you can have the robot make two passes over the same area, which it does in a crosshatch pattern. And the app helpfully clues you in to everything that the robot is doing, including real-time position.

The app does and excellent job of showing where the robot has cleaned. You can also add furniture and floor types to help the robot clean better.Evan Ackerman/IEEE Spectrum

I’m pleasantly surprised by my experience with the S10 and the water dock. It was relatively easy to install and works exactly as it should. This is getting very close to the dream for robot vacuums, right? I will never have to worry about clean water tanks or dirty water tanks. The robot can mop every day if I want it to, and I don’t ever have to think about it, short of emptying the charging dock’s dustbin every few months and occasionally doing some basic robot maintenance.

SwitchBot’s Future

Being able to access water on-demand for mopping is pretty great, but the S10’s water dock is about more than that. SwitchBot already has plans for a humidifier and dehumidifier, which can be filled and emptied with the S10 acting as a water shuttle. And the dehumidifier can even pull water out of the air and then the S10 can use that water to mop, which is pretty cool. I can think of two other applications for a water shuttle that are immediately obvious: pets, and plants.

SwitchBot is already planning for more ways of using the S10’s water transporting capability.SwitchBot

What about a water bowl for your pets that you can put anywhere in your house, and it’s always full of fresh water, thanks to a robot that not only tops the water off, but changes it completely? Or a little plant-sized dock that lives on the floor with a tube up to the pot of your leafy friend for some botanical thirst quenching? Heck, I have an entire fleet of robotic gardens that would love to be tended by a mobile water delivery system.

SwitchBot is not the only company to offer plumbing integration for home robots. Narwal and Roborock also have options for plumbing add-on kits to their existing docks, although they seem to be designed more for European or Asian homes where home plumbing tends to be designed a bit differently. And besides the added complication of systems like these, you’ll pay a premium for them: the SwitchBot S10 can cost as much as $1200, although it’s frequently on sale for less. As with all new features for floor care robots, though, you can expect the price to drop precipitously over the next several years as new features become standard, and I hope plumbing integration gets there soon, because I’m sold.

Thirteen years since a massive earthquake and tsunami struck the Fukushima Dai-ichi nuclear power plant in northern Japan, causing a loss of power, meltdowns and a major release of radioactive material, operator Tokyo Electric Power Co. (TEPCO) finally seems to be close to extracting the first bit of melted fuel from the complex—thanks to a special telescopic robotic device.

Despite Japan’s prowess in industrial robotics, TEPCO had no robots to deploy in the immediate aftermath of the disaster. Since then, however, robots have been used to measure radiation levels, clear building debris, and survey the exterior and interior of the plant overlooking the Pacific Ocean.

It will take decades to decommission Fukushima Dai-ichi, and one of the most dangerous, complex tasks is the removal and storage of about 880 tons of highly radioactive molten fuel in three reactor buildings that were operating when the tsunami hit. TEPCO believes mixtures of uranium, zirconium and other metals accumulated around the bottom of the primary containment vessels (PCVs) of the reactors—but the exact composition of the material is unknown. The material is “fuel debris,” which TEPCO defines as overheated fuel that has melted with fuel rods and in-vessel structures, then cooled and re-solidified. The extraction was supposed to begin in 2021 but ran into development delays and obstacles in the extraction route; the coronavirus pandemic also slowed work.

While TEPCO wants a molten fuel sample to analyze for exact composition, getting just a teaspoon of the stuff has proven so tricky that the job is years behind schedule. That may change soon as crews have deployed the telescoping device to target the 237 tons of fuel debris in Unit 2, which suffered less damage than the other reactor buildings and no hydrogen explosion, making it an easier and safer test bed.

“We plan to retrieve a small amount of fuel debris from Unit 2, analyze it to evaluate its properties and the process of its formation, and then move on to large-scale retrieval,” says Tatsuya Matoba, a spokesperson for TEPCO. “We believe that extracting as much information as possible from the retrieved fuel debris will likely contribute greatly to future decommissioning work.”

How TEPCO Plans to Retrieve a Fuel Sample

Getting to the fuel is easier said than done. Shaped like an inverted light bulb, the damaged PCV is a 33-meter-tall steel structure that houses the reactor pressure vessel where nuclear fission took place. A 2-meter-long isolation valve designed to block the release of radioactive material sits at the bottom of the PCV, and that’s where the robot will go in. The fuel debris itself is partly underwater.

The robot arm is being preceded by a smaller telescopic device. The telescopic device, which is trying to retrieve 3 grams of the fuel debris without further contamination to the outside environment, is similar to the larger robot arm, which is better suited for the retrieval of larger bits of debris.

Mitsubishi Heavy Industries, the International Research Institute for Nuclear Decommissioning and UK-based Veolia Nuclear Solutions developed the robot arm to enter small openings in the PCV, where it can survey the interior and grab the fuel. Mostly made of stainless steel and aluminum, the arm measures 22 meters long, weighs 4.6 tons and can move along 18 degrees of freedom. It’s a boom-style arm, not unlike the robotic arms on the International Space Station, that rests in a sealed enclosure box when not extended.

The arm consists of four main elements: a carriage that pushes the assembly through the openings, arm links that can fold up like a ream of dot matrix printer paper, an arm that has three telescopic stages, and a “wand” (an extendable pipe-shaped component) with cameras and a gripper on its tip. Both the arm and the wand can tilt downward toward the target area.

After the assembly is pushed through the PCV’s isolation valve, it angles downward over a 7.2-meter-long rail heading toward the base of the reactor. It continues through existing openings in the pedestal, a concrete structure supporting the reactor, and the platform, which is a flat surface under the reactor.

Then, the tip is lowered on a cable like the grabber in a claw machine toward the debris field at the bottom of the pedestal. The gripper tool at the end of the component has two delicate pincers (only 5 square millimeters), that can pinch a small pebble of debris. The debris is transferred to a container and, if all goes well, is brought back up through the openings and placed in a glovebox: A sealed, negative-pressure container in the reactor building where initial testing can be performed. It will then be moved to a Japan Atomic Energy Agency facility in nearby Ibaraki Prefecture for detailed analysis.

While the gripper on the telescopic device currently being used was able to reach the debris field and grasp a piece of rubble—it’s unknown if it was actually melted fuel—last month, two of the four cameras on the device stopped working a few days later, and the device was eventually reeled back into the enclosure box. Crews confirmed there were no problems with signal wiring from the control panel in the reactor building, and proceeded to perform oscilloscope testing. TEPCO speculates that radiation passing through camera semiconductor elements caused electrical charge to build up, and that the charge will drain if the cameras are left on in a relatively low-dose environment. It was the latest setback in a very long project.

“Retrieving fuel debris from Fukushima Daiichi Nuclear Power Station is an extremely difficult task, and a very important part of decommissioning,” says Matoba. “With the goal of completing the decommissioning in 30 to 40 years, we believe it is important to proceed strategically and systematically with each step of the work at hand.”

This story was updated on 15 October, 2024 to clarify that TEPCO is using two separate tools (a smaller telescopic device and a larger robot arm) in the process of retrieving fuel debris samples.

The water column is hazy as an unusual remotely operated vehicle glides over the seafloor in search of a delicate tilt meter deployed three years ago off the west side of Vancouver Island. The sensor measures shaking and shifting in continental plates that will eventually unleash another of the region’s 9.0-scale earthquakes (the last was in 1700). Dwindling charge in the instruments’ loggers threatens the continuity of the data.

The 4-metric-ton, C$8-million (US $5.8-million) remotely operated vehicle (ROV) is 50 meters from its target when one of the seismic science platforms appears on its sonar imaging system, the platform’s hard edges crystallizing from the grainy background like a surgical implant jumping out of an ultrasound image. After easing the ROV to the platform, operators 2,575 meters up at the Pacific’s surface instruct its electromechanical arms and pincer hands to deftly unplug a data logger, then plug in a replacement with a fresh battery.

This mission, executed in early October, marked an exciting moment for Josh Tetarenko, director of ROV operations at North Vancouver-based Canpac Marine Services. Tetarenko is the lead designer behind the new science submersible and recently dubbed it Jenny in homage to Forrest Gump, because the fictional character named all of his boats Jenny. Swapping out the data loggers west of Vancouver Island’s Clayoquot Sound was part of a weeklong shakedown to test Jenny’s unique combination of dexterity, visualization chops, power, and pressure resistance.

Jenny is only the third science ROV designed for subsea work to a depth of 6,000 meters.

By all accounts Jenny sailed through. Tetarenko says the worst they saw was a leaky O-ring and the need to add some spring to a few bumpers. “Usually you see more things come up the first time you dive a vehicle to those depths,” says Tetarenko.

Jenny’s successful maiden cruise is just as important for Victoria, B.C.–based Ocean Networks Canada (ONC), which operates the NEPTUNE undersea observatory. The North-East Pacific Time-series Undersea Networked Experiments array boasts thousands of sensors and instruments, including deep-sea video cameras, seismometers, and robotic rovers sprawled across this corner of Pacific. Most of these are connected to shore via an 812-kilometer power and communications cable. Jenny was custom-designed to perform the annual maintenance and equipment swaps that have kept live data streaming from that cabled observatory nearly continuously for the past 15 years, despite trawler strikes, a fault on its backbone cable, and insults from corrosion, crushing pressures, and fouling.

NEPTUNE remains one of the world’s largest installations for oceanographic science despite a proliferation of such cabled observatories since it went live in 2009. ONC’s open data portal has over 37,000 registered users tapping over 1.5 petabytes of ocean data—information that’s growing in importance with the intensification of climate change and the collapse of marine ecosystems.

Over the course of Jenny’s maiden cruise, her operators swapped devices in and out at half a dozen ONC sites, including at several of NEPTUNE’s five nodes and at one of NEPTUNE’s smaller sister observatories closer to Vancouver.

Inside Jenny

ROV Jenny aboard the Valour, Canpac’s 50-meter offshore workhorse, ahead of October’s NEPTUNE observatory maintenance cruise.Ocean Networks Canada

What makes Jenny so special?

• Jenny is only the third science ROV designed for subsea work to a depth of 6,000 meters.
• Motion sensors actively adjust her 7,000-meter-long umbilical cable to counteract topside wave action that would otherwise yank the ROV around at depth and, in rough seas, could damage or snap the cable.
• Dual high-dexterity manipulator arms are controlled by topside operators via a pair of replica mini-manipulators that mirror the movements.
• Each arm is capable of picking up objects weighing about 275 kilograms, and the ROV itself can transport equipment weighing up to 3,000 kg.
• 11 high-resolution cameras deliver 4K video, supported by 300,000 lumens of lighting that can be tuned to deliver the soft red light needed to observe bioluminescence.
• Dual multibeam sonar systems maximize visibility in turbid water.

Meghan Paulson, ONC’s executive director for observatory operations, says the sonar imaging system will be particularly invaluable during dives to shallower sites where sediments stirred up by waves and weather can cut visibility from meters to centimeters. “It really reduces the risk of running into things accidentally,” says Paulson.

To experience the visibility conditions for yourself, check out recordings of the live video broadcast from the NEPTUNE maintenance cruise. Tetarenko says that next year they hope to broadcast not only the main camera feed but also one of the sonar images.

3D video could be next, according to Canpac ROV pilot and Jenny codesigner, James Barnett. He says they would need to boost the computing power installed topside, to process that “firehose of data,” but insists that real-time 3D is “definitely not impossible.” Tetarenko says the science ROV community is collaborating on software to help make that workable: “3D imagining is kind of the very latest thing that’s being tested on lots of ROV systems right now, but nobody’s really there yet.”

More Than Science

Expansion of the cabled observatory concept is the more certain technological legacy for ONC and NEPTUNE. In fact, the technology has evolved beyond just oceanography applications.

ONC tapped Alcatel Submarine Networks (ASN) to design and build the Neptune backbone and the French firm delivered a system that has reliably delivered multigigabit Ethernet plus 10 kilovolts of direct-current electricity to the deep sea. Today ASN deploys a second-generation subsea power and communications networking solution, developed with the Norwegian international energy company Equinor.

ASN’s “Direct Current/Fiber Optic” or DC/FO system provides the 100-km backbone for the ARCA subsea neutrino observatory near Sicily, in addition to providing control systems for a growing number of offshore oil and gas installations. The latter include projects led by Equinor and BP where DC/FO networks drive the subsea injection of captured carbon dioxide and monitor its storage below the seabed. Future oil and gas projects will increasingly rely on the cables’ power supply to replace the hydraulic lines that have traditionally been used to operate machinery on the seafloor, according to Ronan Michel, ASN’s product line manager for oil and gas solutions.

Michel says DC/FO incorporates important lessons learned from the Neptune installation. And the latter’s existence was a crucial prerequisite. “The DC/FO solution would probably not exist if Neptune Canada would not have been developed,” says Michel. “It probably gave confidence to Equinor that ASN was capable to develop subsea power and coms infrastructure.”

Simone Giertz came to fame in the 2010s by becoming the self-proclaimed “queen of shitty robots.” On YouTube she demonstrated a hilarious series of self-built mechanized devices that worked perfectly for ridiculous applications, such as a headboard-mounted alarm clock with a rubber hand to slap the user awake.

But Giertz has parlayed her Internet renown into Yetch, a design company that makes commercial consumer products. (The company name comes from how Giertz’s Swedish name is properly pronounced.) Her first release, a daily habit-tracking calendar, was picked up by prestigious outlets such as the Museum of Modern Art design store in New York City. She has continued to make commercial products since, as well as one-off strange inventions for her online audience.

Where did the motivation for your useless robots come from?

Simone Giertz: I just thought that robots that failed were really funny. It was also a way for me to get out of creating from a place of performance anxiety and perfection. Because if you set out to do something that fails, that gives you a lot of creative freedom.

You built up a big online following. A lot of people would be happy with that level of success. But you moved into inventing commercial products. Why?

Giertz: I like torturing myself, I guess! I’d been creating things for YouTube and for social media for a long time. I wanted to try something new and also find longevity in my career. I’m not super motivated to constantly try to get people to give me attention. That doesn’t feel like a very good value to strive for. So I was like, “Okay, what do I want to do for the rest of my career?” And developing products is something that I’ve always been really, really interested in. And yeah, it is tough, but I’m so happy to be doing it. I’m enjoying it thoroughly, as much as there’s a lot of face-palm moments.

Giertz’s every day goal calendar was picked up by the Museum of Modern Art’s design store. Yetch

What role does failure play in your invention process?

Giertz: I think it’s inevitable. Before, obviously, I wanted something that failed in the most unexpected or fun way possible. And now when I’m developing products, it’s still a part of it. You make so many different versions of something and each one fails because of something. But then, hopefully, what happens is that you get smaller and smaller failures. Product development feels like you’re going in circles, but you’re actually going in a spiral because the circles are taking you somewhere.

What advice do you have for aspiring inventors?

Giertz: Make things that you want. A lot of people make things that they think that other people want, but the main target audience, at least for myself, is me. I trust that if I find something interesting, there are probably other people who do too. And then just find good people to work with and collaborate with. There is no such thing as the lonely genius, I think. I’ve worked with a lot of different people and some people made me really nervous and anxious. And some people, it just went easy and we had a great time. You’re just like, “Oh, what if we do this? What if we do this?” Find those people.

This article appears in the November 2024 print issue as “The Queen of Useless Robots.”

Marina Umaschi Bers has long been at the forefront of technological innovation for kids. In the 2010s, while teaching at Tufts University, in Massachusetts, she codeveloped the ScratchJr programming language and KIBO robotics kits, both intended for young children in STEM programs. Now head of the DevTech research group at Boston College, she continues to design learning technologies that promote computational thinking and cultivate a culture of engineering in kids.

What was the inspiration behind creating ScratchJr and the KIBO robot kits?

Marina Umaschi Bers: We want little kids—as they learn how to read and write, which are traditional literacies—to learn new literacies, such as how to code. To make that happen, we need to create child-friendly interfaces that are developmentally appropriate for their age, so they learn how to express themselves through computer programming.

How has the process of invention changed since you developed these technologies?

Bers: Now, with the maker culture, it’s a lot cheaper and easier to prototype things. And there’s more understanding that kids can be our partners as researchers and user-testers. They are not passive entities but active in expressing their needs and helping develop inventions that fit their goals.

What should people creating new technologies for kids keep in mind?

Bers: Not all kids are the same. You really need to look at the age of the kids. Try to understand developmentally where these children are in terms of their cognitive, social, emotional development. So when you’re designing, you’re designing not just for a user, but you’re designing for a whole human being.

The other thing is that in order to learn, children need to have fun. But they have fun by really being pushed to explore and create and make new things that are personally meaningful. So you need open-ended environments that allow children to explore and express themselves.

The KIBO kits teach kids robotics coding in a playful and screen-free way. KinderLab Robotics

How can coding and learning about robots bring out the inner inventors in kids?

Bers: I use the words “coding playground.” In a playground, children are inventing games all the time. They are inventing situations, they’re doing pretend play, they’re making things. So if we’re thinking of that as a metaphor when children are coding, it’s a platform for them to create, to make characters, to create stories, to make anything they want. In this idea of the coding playground, creativity is welcome—not just “follow what the teacher says” but let children invent their own projects.

What do you hope for in terms of the next generation of technologies for kids?

Bers: I hope we would see a lot more technologies that are outside. Right now, one of our projects is called Smart Playground [a project that will incorporate motors, sensors, and other devices into playgrounds to bolster computational thinking through play]. Children are able to use their bodies and run around and interact with others. It’s kind of getting away from the one-on-one relationship with the screen. Instead, technology is really going to augment the possibilities of people to interact with other people, and use their whole bodies, much of their brains, and their hands. These technologies will allow children to explore a little bit more of what it means to be human and what’s unique about us.

This article appears in the November 2024 print issue as “The Kids’ Inventor.”

Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.

Humanoids 2024: 22–24 November 2024, NANCY, FRANCE

Enjoy today’s videos!

Swiss-Mile’s robot (which is really any robot that meets the hardware requirement to run their software) is faster than “most humans.” So what does that mean, exactly?

The winner here is Riccardo Rancan, who doesn’t look like he was trying especially hard—he’s the world champion in high-speed urban orienteering, which is a sport that I did not know existed but sounds pretty awesome.

[ Swiss-Mile ]

Thanks, Marko!

Oh good, we’re building giant fruit fly robots now.

But seriously, this is useful and important research because understanding the relationship between a nervous system and a bunch of legs can only be helpful as we ask more and more of legged robotic platforms.

[ Paper ]

Thanks, Clarus!

Watching humanoids get up off the ground will never not be fascinating.

[ Fourier ]

The Kepler Forerunner K2 represents the Gen 5.0 robot model, showcasing a seamless integration of the humanoid robot’s cerebral, cerebellar, and high-load body functions.

[ Kepler ]

Diffusion Forcing combines the strength of full-sequence diffusion models (like SORA) and next-token models (like LLMs), acting as either or a mix at sampling time for different applications without retraining.

[ MIT ]

Testing robot arms for space is no joke.

[ GITAI ]

Welcome to the Modular Robotics Lab (ModLab), a subgroup of the GRASP Lab and the Mechanical Engineering and Applied Mechanics Department at the University of Pennsylvania under the supervision of Prof. Mark Yim.

[ ModLab ]

This is much more amusing than it has any right to be.

[ Westwood Robotics ]

Let’s go for a walk with Adam at IROS’24!

[ PNDbotics ]

From Reachy 1 in 2023 to our newly launched Reachy 2, our grippers have been designed to enhance precision and dexterity in object manipulation. Some of the models featured in the video are prototypes used for various tests, showing the innovation behind the scenes.

[ Pollen ]

I’m not sure how else you’d efficiently spray the tops of trees? Drones seem like a no-brainer here.

[ SUIND ]

Presented at ICRA40 in Rotterdam, we show the challenges faced by mobile manipulation platforms in the field. We at CSIRO Robotics are working steadily towards a collaborative approach to tackle such challenging technical problems.

[ CSIRO ]

ABB is best known for arms, but it looks like they’re exploring AMRs (autonomous mobile robots) for warehouse operations now.

[ ABB ]

Howie Choset, Lu Li, and Victoria Webster-Wood of the Manufacturing Futures Institute explain their work to create specialized sensors that allow robots to “feel” the world around them.

[ CMU ]

Columbia Engineering Lecture Series in AI: “How Could Machines Reach Human-Level Intelligence?” by Yann LeCun.

Animals and humans understand the physical world, have common sense, possess a persistent memory, can reason, and can plan complex sequences of subgoals and actions. These essential characteristics of intelligent behavior are still beyond the capabilities of today’s most powerful AI architectures, such as Auto-Regressive LLMs.
I will present a cognitive architecture that may constitute a path towards human-level AI. The centerpiece of the architecture is a predictive world model that allows the system to predict the consequences of its actions. and to plan sequences of actions that that fulfill a set of objectives. The objectives may include guardrails that guarantee the system’s controllability and safety. The world model employs a Joint Embedding Predictive Architecture (JEPA) trained with self-supervised learning, largely by observation.

[ Columbia ]

Maryland's new education chief, Carey Wright, an old-school champion of rigorous standards, is pushing back against efforts in other states to boost test scores by essentially lowering their exp

Donald Trump will embrace the truth Joe Biden has refused to countenance: Israel's enemies are America's enemies. And when Israel defeats its enemies, America wins.

The end to this bloody stalemate must come with negotiation, and Putin should not wait until Trump is in the White House, says Guardian columnist Simon Jenkins

Hours after Donald Trump wins the most conclusive mandate in 40 years, Mitch McConnell engineers a coup against his agenda by calling early leadership elections in the senate.

Friday on the RealClearPolitics radio show -- weeknights at 6:00 p.m. on SiriusXM's POTUS Channel 124 and then on Apple, Spotify, and here on our website -- Tom Bevan, Andrew Walworth, and Carl Cannon look at the latest count to determine the final popular vote and House majority.

They were the ten words that sealed the comeback deal for Donald Trump.

Zeiger is president of the Jack Miller Center, an educational venture to advance the history, documents and ideals we hold in common as Americans.As a nation, we are failing to prepare citizens for leadership in our constitutional republic. According to a September 2023 Pew Research Center study, 72...

An insider reveals the famed aviation company's apparent change of heart.

Upon further review, analyst Sean Trend may be right: There may be an emerging GOP majority nationwide.

My home state, the Garden State, is angry mercurial, and Trump came frighteningly close to winning there a week ago.

Who Will Fill the Democratic Vacuum?

Meta had huge success last year with its flagship Quest 3 VR headset and it is back with a significantly cheaper 3S device that compromises on visuals but still delivers a great experience

EA FC 25 players have a whole new Team of the Week to grind for, and there are some fantastic cards among them, including Sporting CP's hotshot striker Viktor Gyokeres.

Aside from offering a more powerful console, the PS5 Pro also packs a sneaky theme for PlayStation fans to uncover - something Sony hadn't previously discussed.

Destiny 2's Exotic vendor, Xur, is back again this week. Here's how to find him, what he's selling, and whether we recommend his offerings before he vanishes again.

EA FC 25 players can snag some big freebies this week, with EA Sports celebrating the Ballon d'Or in style for all Ultimate Team players with some of the best players around.

Black Ops 6 is here, and fans have been itching to know what's included in Season 1 - and now we have an answer. Here's what's included, and when you can play

Call of Duty fans are impressed by Black Ops 6 Season 1 already, calling it the 'best Season 1 roadmap' since 2019's Modern Warfare reboot and you can find out below why they're saying it

The Pokemon Company is teaming up with content creators to stage a 24-hour unboxing live stream for its new Scarlet & Violet - Surging Sparks card set as you Gotta Catch 'Em All

Overwatch 2 is bringing 6v6 gameplay back from Overwatch 1 - and fans are overjoyed. Here's all we know so far, including when you can finally play the Classic mode

Hackers are exploiting EA FC 25 to nab millions of coins and snipe the world's best football players and EA seems unable to stop it - and this is how it happens

Pikachu ex, found in the new Pokemon TCG set Surging Sparks, has seen its value soar with players spending over $500 for the latest card. Here's why.

If you wanted to return to GTA Trilogy, now might be the best time as the game has finally got an update after three years which makes it closer to the much better mobile version

Comet Nishimura (C/2023 P1) was discovered in August and is now whizzing by Earth, but finding it in the sky will be a challenge.

Scientists say geoengineering, or doing things like intentionally increasing Earth’s reflectivity or blocking the sun, is a “really big deal” in slowing down climate change. Here are the ideas they are proposing.

More than 80 per cent of B.C.'s water basins are experiencing level 4 or 5 drought conditions, with salmon in many parts of the province struggling to make it to their spawning grounds.

Certain strains of E. coli are capable of causing severe disease, by rapidly spreading through the human digestive system, wreaking havoc throughout the bloodstream, and eventually damaging the delicate kidneys. That's the situation right now during a large outbreak in Alberta, with hundreds of children now affected.

NASA said Thursday that the study of UFOs will require new scientific techniques, including advanced satellites as well as a shift in how unexplained sightings are perceived.