Mine workers are experiencing an increase in dangerous health effects from heat exposure as surface temperatures get hotter and underground mines get deeper.

NTSB investigators said failed wheel bearing caused Norfolk Southern train derailment in East Palestine, Ohio.

Grant applications must be submitted by August 20, 2024, and grants will be awarded on or before Sept. 30, 2024.

The proposed rule would require employers to develop an injury and illness prevention plan to control heat hazards in workplaces affected by excessive heat.

A dockworker strike that could affect up to 36 ports along the U.S. East and Gulf Coasts would significantly impact the economy; the roofing industry would not be spared.

Casella has launched an enhanced version of its Vortex3 high flow pump, designed to simplify asbestos and air sampling.

Silica is released into the air during the construction process and breathing it in can lead to cancer. Use this guide to learn how to work safely with silica in every setting.

One of the most common OSHA violations is respiratory protection. Let’s dive into why and what’s required to be compliant.

Learn about two specific air filtration and dust collection standards set by ASHRAE to guide you in establishing air quality programs.

A new study summarizing exposures to asbestos during the installation and removal of asbestos cement products demonstrates that these construction activities almost always exceed U.S. occupational limits.

Sensidyne® launches Gilian® Go-Cal^TM Pro, an advanced portable air flow calibrator designed to revolutionize precision calibration on the jobsite.

More than two million workers in the construction industry have been exposed to silica in the workplace. Short of a complete double lung transplant, silicosis is both a chronic and incurable condition.

Learn about sources of silica dust and best inspection practices to improve indoor air quality and reducing health risk in facilities.

To support effective monitoring and compliance with safety standards, this article provides an overview on best practices for air sampling at work.

This article describes potential sources of combustible dust and outlines best inspection practices for OSH professionals, certified industrial hygienists and certified remediators to perform the suspect combustible dust inspection.

Confined space work is not limited to descending into compact areas, so it’s important to be prepared for safety both above and below ground.

Engineered to work with materials that create sticky or agglomerative dust, the evolutionary Dalamatic G2 dust collector includes patented Dura-Life^™ bag filters. 

The new Hygienically Clean Certification Portal launched on April 15 as part of the Hygienically Clean Certification Program Enhancement Initiatives. 

While regulations exist to minimize dangers of toxic substances in industrial plants, there are additional methods that can be incorporated to effectively reduce air pollution in these facilities.

The industrial gas safety series will further provide partners and customers with the ability to protect employees and their facilities when working near both toxic and hazardous gases.

The proposed legislation would direct the EPA to establish a list of indoor contaminants and voluntary guidelines.

It’s a fact of life in every industrial facility: Heavy machinery and a cavernous room are a bad combination. The noise generated in such an environment quickly becomes intolerable, not to mention dangerous for those working there.

In 2016, the National Institute for Occupational Safety and Health (NIOSH) empowered miners with a new wearable device according to Centers for Disease Control and Prevention. NIOSH researchers have documented that a continual personal dust monitor has created a 90% decrease in dangerous levels of dust for miners reducing pneumoconiosis (black lung).

The SCHACHTBAU Group, headquartered in Nordhausen (Northern Thuringia, Germany), looks back on a tradition spanning more than 110 years of business in the sectors of mining industry, machine-building, steel construction, plant technology and building industry. Starting as a technology supplier for the specialist mining sector, the company evolved into a globally acting business with more than 900 employees in several branches.

From wearable safety devices to machine learning to Big Data, companies now have more tools than ever to help push safety incidents down to zero.

OXEA, part of the Oman Oil Company, is a leading chemicals manufacturer with operations around the globe. Its specialist products go towards making high-quality coatings, lubricants, cosmetics, pharmaceutical products, printing inks and plastics.

Today, optrel, a leading manufacturer of active eye protection products, introduced its new crystal2.0 welding helmet with Crystal 2.0 Lens Technology (CLT2.0) — representing a quantum leap forward in optical clarity for welders before, during, and after welding.

A physical therapist at Rocky Mountain Human Performance and Pedorthic Specialist at Turnpike Comfort Footwear are both treating lower extremity issues in athletes and other patients with SelectFlex®, the first arch control insole of its kind.

The Orange County Sanitation District in Huntington Beach, California provides wastewater collection, treatment, and disposal services for approximately 2.6 million people. They had a combination of loud industrial equipment, cavernous space, and highly reflective surfaces creating an acoustic nightmare.

Establishing any construction project is a careful balancing act between many legal, financial and social responsibilities. Firms not only have a responsibility to shareholders and business partners, but to their workers, the local authority and site neighbors in the wider community as well.

Many companies are still refining how they’ll safely bring employees back to the office. Yet not every business can operate with a 100 percent remote workforce. For some, essential employees need to be onsite at all times. Ampirical is one of those businesses.

Compared to 10-15 years ago, companies are safer. Whether it’s tighter regulations, more awareness, enhanced experience, technology improvements or other factors, companies are doing a better job keeping their employees safe at the workplace. However, that number has plateaued over the last couple of years—the total incident rate per 100 workers has not changed significantly since 2017.

The natural gas meter may be the textbook example of something that is said to be “hidden in plain sight.” Every structure – from house to hospital and grocery store to commercial warehouse – that uses natural gas as the feedstock for its furnaces, stoves or water heaters has at least one of the (usually) gray boxes bolted to its exterior.

Employees working at water treatment plants face danger every day. The work is inherently treacherous, as water makes every step potentially hazardous, and sometimes even life-threatening.

Garney Construction trialed a new continuous monitoring smart PPE system, comprised of sensors worn on the arm of its workers and technology that collects data to signal when the worker may be headed for trouble while working in the heat.

A manufacturing plant has been dealing with hot machinery and punishing Texas heat. The buildings are made of tin with little insulation. That means it gets really hot. They solved this issue with evaporative coolers.

A manufacturer of robotic road painting systems, RoadPrintz Inc., based in Cleveland Heights, Ohio, unites pioneering innovation with sound engineering to produce operator-driven vehicles equipped with cutting-edge technology for the painting of road symbols without the use of stencils.

How many years will it take for AI applications to trickle down to small contractors? The odds are the OSH benefits will not be equitably distributed.

“Let families decide” is the only reform of the DOL chapter in Project 2025 - a controversial Republican blueprint - specifically referencing job safety. This article is about youth safety, not politics. What do you think?

Exhibitor applications for A+A 2021, International Trade Fair with Congress for Safety, Security and Health at Work, are now available online at www.aplusa-online.com. The deadline for reserving exhibit space at A+A 2021 is December 1, 2020. The event will be held from October 26 – 29, 2021at the fairgrounds in Düsseldorf, Germany.

The shipping and trucking industry has had to work within unique OSHA standards for years. As the COVID-19 pandemic continues, logistics companies will have to adapt to new, changing regulations. Not everything is a matter of law, and some guidelines may be unclear, so this isn't always a straightforward task

There have been some unsettling reports recently of large increases in the number of whistleblower complaints to OSHA related to COVID-19.

As the U.S. has begun to reopen with the coronavirus continuing to affect the country six months after many shelter-in-place mandates developed, workers across a multitude of industries — from manufacturing plants to agriculture to meat processing — are getting sick.

Every year, AdvisorSmith researches the most dangerous jobs in the United States based on data from the U.S. Bureau of Labor Statistics Census of Fatal Occupational Injuries. The list doesn’t usually vary by too much, but there are some statistics worth a second look in the current list, which uses data from 2014-2018.

Protective Industrial Products, Inc. (“PIP^®”), a leading supplier of hand protection and PPE to the industrial, construction, and retail markets, proudly announces the acquisition of Primax Manufacturing & Trading, Inc. (“Primax”) and its innovative Caiman^® brand, headquartered in La Mirada, CA. PIP^® is a portfolio company of Audax Private Equity (“Audax”).

Through cross-industry partnership, Blackline Collective empowers leaders with a forum to share experiences, best practices and strategies that improve worker safety, efficiency and quality

For six days, a massive ship called the Ever Given captivated the world as it remained stuck in the Suez Canal. The resulting congestion cost as much as $10 billion a day, slowing global maritime trade.

The OSH industry looks forward to A+A as a physical trade fair in autumn 2021. This is confirmed by the exhibitor registrations received to date. From October 26 – 29, 2021 over 1,000 companies will showcase their products, solutions and global innovations to predominantly European visitors at the fairgrounds in Düsseldorf, Germany.

A+A 2021 – the leading International Trade Fair for Safety, Security and Health at Work – drew to a successful close after four days: 1,204 exhibitors from 56 nations and more than 25,000 trade visitors traveled to Düsseldorf, Germany to attend the sector’s most relevant trade fair.

This past November 2021, 193 countries attending UNESCO’s (UN’s science body) General Conference agreed to abide by common standards for open science.