Caleffi's new AutoFill has a fill rate of 5.5 GPM and maintains stable system pressure, ensuring consistent results without the need for constant monitoring.

With user-friendly plug-in installation and energy-saving thermostat control, the system is ideal for preventing ice from forming inside 3/4-inch to 6-inch diameter water lines in temperatures below -40°F (-40° C).

The simplicity of the patented Centra-lok design is also intended to offer a cost-effective vinyl-by-vinyl containment system for commercial, industrial, and municipal water and wastewater applications.

T&S offers two versatile hand wash sink options, each available in single or two-hole configurations, with both sensor and manual faucet options, providing flexibility to accommodate various installation requirements.

Education enhanced my earning potential. I became a more skilled technician, gained knowledge about new and emerging technologies, and became a much more valuable asset to my employers. Throughout my journey, I met numerous mentors in various aspects of the PHVAC trades and established insider contacts that proved to be invaluable.

Efficient fleet management is essential for plumbing and HVAC contractors looking to optimize operations and improve service. Customizing fleet vehicles to meet specific company needs is a key strategy. Modern upfitting now includes advanced technology and ergonomic designs, creating mobile workstations that boost efficiency on job sites.

Last week, we did a simple oil to gas steam boiler replacement. The customer (Mike) has been a family friend of my parents for more than 60 years. Mike’s grandfather built the house back in the 1920s. The home is currently occupied by Mike’s daughter and her two teenage grandchildren.

In the world of business, challenges are inevitable. Economic shifts, changing consumer demands and unforeseen crises are part and parcel of running a company.

Recognizing that pipe joints are the most common source of premature leaks and system failures, IPEX has designed Centra-lok to minimize maintenance, repair and installation costs.

Your vehicles are a projection of your brand into the market.

The IDS Ultra qualifies for federal tax credits and state rebates as an Energy Star V6.1 Cold Climate-certified product.  

The product launch also includes a new size, the EZ71 (photo left). All three EZ Series models, including the popular EZ98DV and the EZ111DV, will continue to carry a 25-year warranty on both their primary and secondary stainless steel heat exchangers. 

The improved ease of sizing these units makes it easier for customers to adopt commercial heat pump technology and allows them to take advantage of local HPWH rebates.

Darrell Jones found himself in quite a pickle back in 1986. At the time, Jones was working for close friend and mentor Louie Garner at Garner’s contracting business.

Stuart’s Plumbing has been a family business for more than 28 years. The company was established in 1990 by the late Stuart Baldick Jr. But after 10 years of owning the franchise, he decided to branch out and establish his own brand.

Maloney Plumbing was founded by William “Duke” Maloney and his wife, Mary Maloney, in May 1964 after the couple gave up farming in Idaho to move to Phoenix.

When Brooklyn, New York, native Yuda Best turned 28, he moved to Miami and opened his own plumbing business. Now, two years later, Oasis Plumbing going strong.

“Don’t call the average Joe, call NixCo.”

After returning from Vietnam, Paul A. Campione Jr., a Purple Heart and Bronze Star recipient, came home to his wife and worked many odd jobs until he got into the plumbing industry.

U.S. Navy Veteran Brian Beltz got his start in the trades during his service as an interior communications electrician stationed on the destroyer, the USS John Hancock.

David Sparling started working for his father’s plumbing company in 1979. By the time Sparling took over the small family business, known as Sparling Plumbing, he decided he needed to start fresh. So he folded Sparling Plumbing and founded Safari Plumbing in 2006.

As a third generation plumber, Eric Carter has been around the plumbing industry his entire life.

Founded in 1961, Herman’s Plumbing has the distinction of being a thriving third-generation family-run business. 

Growing up around the plumbing industry and watching their father, Bob Ray as he worked endless hours diligently growing his business, made the opportunity to purchase Atlas Plumbing for brother and sister, Rod and Sunshine Ray even more special. 

Ricci Hancock helps manage and run his father’s plumbing, heating and AC full service and repair business.

Named after a local mountain and using the colors of the state’s only four year university, Aspen Mountain Plumbing’s trucks remind all the locals of home. 

A third generation plumber, Mitch Kenney started out working at his father’s company in Colorado, then branched out and tried a couple different entrepreneurial opportunities. 

Being an avid surfer in a community that revolves around the beach and ocean, Josh Martin, president and owner, knew “Seaside Plumbing” would be the perfect name for his company.

“Anything worth doing is worth doing right.”

That’s the slogan of Pataskala, Ohio-based Crawford Mechanical Services (CMS). 

People join the trades for many reasons, family business, a desire for little to no school debt, etc. 

At age 62, Paul Cleary has been in the trades for 44 years. He went to vocational school in Connecticut and then joined the union after high school. 

Patrick Jorge Besinga, president/CEO of Works Plumbing, and his wife, Margaret Besinga, vice president/COO, grew up in the Philippines, and both hold a college degree in business and marketing. 

This month, CEC Facilities Group celebrates 12 years in business. 

After working together at a national plumbing franchise, Jeff Morgan and Bob Miller knew there had to be a better way to treat plumbers. So, in 1997, they decided to leave and start their own company, and Morgan Miller Plumbing was born.

Known as “The Temperature Experts,” Shelby Township, Michigan-based Koz Heating & Cooling was founded just eight years ago — the culmination of Michael Kosmalski’s dream to one day own his own HVAC company.

“The right call any time of year” is the perfect slogan for Asheville, North Carolina-based Four Seasons Plumbing. The company was founded in 2006 by husband and wife team, Max Rose and Rachel Rose, thanks to a monetary gift from Max Rose’s grandmother.

Southern Trust Home Services began life on a farm. An electrician by trade, Ted Puzio founded his contracting business in 1995 while raising his two teenage sons. Then named TP Electric, Puzio and his sons renovated and flipped farmhouses before building a two-story facility to both live in and use as a workshop.

What do logging and plumbing have in common? Jon Hatch for one. After a friend told him about a plumbing apprenticeship opening 15 years ago, Jon Hatch made the jump to the plumbing industry. 

For the past 15 years, Steve Baker had a plan to start his own plumbing company. Last year, that dream was finally achieved with the opening of Gideon Plumbing in Duncan, British Columbia, Canada.

After working for a plumbing company who wouldn’t give him a day off, Levi Torres and his wife, Cassi Torres, decided to start their own plumbing business in 2012. The couple wanted a company that supported its employees and served every customer with professionalism and respect, and High 5 Plumbing was born.

After learning the trades during two tours in the Navy Seabees, Guy M. Cooper Sr. decided to start his own business — Guy M. Cooper Plumbing & Heating was founded in 1930. While the mechanical contracting firm has a long, storied history of providing high quality work and high quality jobs for all its employees, the third-generation owners Gary Cooper and Glenn Cooper decided it was time for a rebrand in 2021.

Edwards Plumbing & Heating, a third-generation contracting business, was founded back in 1948 by Charles W Edwards. Charles Edwards, a pipefitter by trade prior to WWII, became a Navy Seabee, building runways in the pacific.

It’s not often that a 27-year-old decides to start his own contracting company, but in the case of Ryan Osterkamp, that’s exactly what happened.

District systems, which have been around for centuries, provide buildings with a product created with technology beyond what an individual can either afford or apply. The primary advantage is the delivery of more cost-effective heating or cooling to the building.

With homes now doing dual duty as both a residence and a workplace, many people are spending double the time in the same space. This lifestyle shift has launched a home-renovation trend for people who are looking to change their current living spaces to better align with the needs of life and work in one place.

Ever since the RPA was formed, members have taken advantage of the great benefits the alliance has to offer, such as codes and standards advocacy, a job center network, obtaining and creating valuable education, the annual Radiant Flooring Guide, newsletter subscription, discounts for IAPMO products and services, access to webinars and more. RPA members are professionals from all facets of the radiant profession, including manufacturers, installers, engineers, architects, students, apprentices and inspectors.

Lochinvar’s CREST with Hellcat Combustion Technology commercial boiler is available in eight models ranging from 999,000-6,000,000 Btu/h.

Integrated Dynamic Control (IDC) is a PC-based intelligent control system delivering optimized comfort and maximized efficiency by coordinating HVAC, IAQ and hydronic systems in one control.

The luxurious Wythe Hotel in Brooklyn, New York, was once a waterfront barrel and rope factory. This renovated structure now has 72 boutique guest rooms. As part of the update, it was important to retain the character of the original turn of the century building, which opened in 1901. In order to convert the cold, utilitarian factory space into comfortable rooms, a major mechanical update was required. By adding radiant floor heat, they were able to meet and exceed the comfort benchmark of a modern-day hotel while balancing for energy efficiency.

REHAU’s EVERLOC+ R-20 manifold connectors for hydronic applications support leak-free reliability in a one-piece assembly including an EVERLOC+ insert with a pre-installed O-ring and swivel nut.