The rising customer expectations, intermingling fields and high performance needs can be satisfied with the system based design. An intelligent Systems Design strategy can offer a quicker route to an optimum design and helps to increase designers' productivity and analyzes efficiency by providing the ability to explore the entire design space. Cadence Intelligent System Strategy enables a system design revolution and reduces project schedules with optimized continuous integration.(read more)

One of the key goals for USB4 is to retain compatibility with the existing ecosystem of USB3.2, USB 2.0 and Thunderbolt  products, and the resulting connection scales to the best mutual capability of the devices being connected. USB4 is designed to work with older versions of USB and Thunderbolt . USB4 Fabric support high throughput interconnects of 10 Gbps (for Gen 2) and 20 Gbps (for Gen 3) and supports Thunderbolt 3-compatible rates of 10.3125 Gbps (for Gen 2) and 20.625 Gbps (for Gen 3). It becomes very important to verify the Thunderbolt  backward compatibility with the designs. Though the support of USB4 Interoperability with Thunderbolt  3 (TBT3) is optional in USB4 host or USB4 peripheral device and required USB4 Hub and USB4 Based Dock but it is very essential to work in the existing ecosystem. 

Few Main features of USB4 Interoperability with Thunderbolt  3 (TBT3) Systems

• Support for Bi-Directional Pins & Retimers: TBT3 Active Cables can contain two bidirectional Re-timers which have the capability to send AT Responses on its RX channel. Router connected directly to such Retimer needs to support A Router that is connected directly to a bidirectional Re-timer shall support reception of Transactions on both TX and RX channels. 

• Bounce Mechanism: This feature is used by Router to access the Register Space of a Cable Re-timer that can only be accessed by its Link Partner.
• Asymmetric Negotiation: The Router which connects with Cable Retimers needs to follow Asymmetric TxFFE in Phase 5 of Lane Initialization. 
• USB4 Link Transitions: In TBT3 mode, the configuration of two independent Single Lane Links can be used non-transient state or Single Lane Link just using the Lane1 Adapter.

Cadence has a mature USB4 Verification IP solution that can help in the verification of USB4 designs with TBT3. Cadence has taken an active part in the Cairo group that defined the USB4 specification and has created a comprehensive Verification IP that is being used by multiple members. If you plan to have a USB4-compatible design, you can reduce the risk of adopting new technology by using our proven and mature USB4 Verification IP. Please contact your Cadence local account team, for more details.

Achieving optimal power transfer in RF PCBs hinges on meticulously routed traces that meet specific impedance requirements. Impedance matching is essential to ensure that traces have the same impedance to prevent signal reflection and inefficient pow...(read more)

At what stage in the design cycle do you start to think about the PCB material costs? What about the costs to assemble the PCB? Once a design becomes successful, should you then redesign it to achieve a scalable product? Placing components and routi...(read more)

Explore Impacts of Finite Interconnect Impedance on PDN Characterization

Over the past few decades, many details have been worked out in the power distribution network (PDN) in the frequency and time domains. We have simulation tools that can analyze the physical structure from DC to very high frequencies, including spatial variations of the behavior. We also have frequency- and time-domain test methods to measure the steady-state and transient behavior of the built-up systems.

All of these pieces in our current toolbox have their own assumptions, limitations, and artifacts, and they constantly raise the challenging question that designers need to answer: How to select the design process, simulation, measurement tools, and processes so that we get reasonable answers within a reasonable time frame with a reasonable budget.

Read this award-winning DesignCon 2024 paper titled “Impact of Finite Interconnect Impedance Including Spatial and Domain Comparison of PDN Characterization.” Led by Samtec’s Istvan Novak and written with a team of nine authors from Cadence, Amazon, and Samtec, the paper discusses a series of continually evolving challenges with PDN requirements for cutting-edge designs.

Read the full paper now: “Impact of Finite Interconnect Impedance Including Spatial and Domain Comparison of PDN Characterization.”

Community engagement is a dynamic concept that does not adhere to a singular, universal approach. Its various forms, methods, and objectives can vary significantly depending on the specific context, goals, and desired outcomes. Whether you seek assis...(read more)

Power network design and analysis of 3D-ICs is a major challenge due to the complex nature and large size of the power network. In addition, designers must deal with the complexity of routing power through the interposer, multiple dies, through-silicon vias (TSVs), and through-dielectric vias (TDVs).
Cadence’s Integrity 3D-IC Platform and Voltus IC Power Integrity Solution provide a fully integrated solution for early planning and analysis of 3D-IC power networks, 3D-IC chip-centric power integrity signoff, and hierarchical methods that significantly improve capacity and performance of power integrity (PI) signoff while maintaining a very high level of accuracy at signoff. This blog summarizes the typical design challenges faced by today’s 3D-IC designers, as discussed in our recent webinar, “Addressing 3D-IC Power Integrity Design Challenges.” Please click here to view the full webinar.

Major Trends in Advanced Chip Design

From chips to chiplets, stacked die, 3D-ICs, and more, three major trends are impacting advanced semiconductor packaging design. The first is heterogenous integration, which we define as a disaggregated approach to designing systems on chip (SoCs) from multiple chiplets. This approach is similar to system-in-package (SiP) design, except that instead of integrating multiple bare die – including 3D stacking – on a single substrate, multiple IPs are integrated in the form of chiplets on a single substrate.

The second major trend is around new silicon manufacturing techniques that leverage silicon vias (TSVs) and high-density fanout RDL. These advancements mean that silicon is becoming a more attractive material for packaging, especially when high bandwidth and form factor become key attributes in the end design. This brings new design and verification challenges to most packaging engineers who typically work with organic and ceramic substrate materials.

Finally, on the ecosystem side, all the large semiconductor foundries now offer their own versions of advanced packaging. This brings new ways of supporting design teams with technologies like reference flows and PDKs, concepts that have typically been lacking in the packaging community. Cadence has worked with many of the leading foundries and outsourced semiconductor assembly and test facilities (OSATs) to develop multi-chip(let) packaging reference flows and package assembly design kits. The downside is that, with the time restrictions designers are under today, there isn’t enough time to simulate the details of these flows and PDKs further.

For those who must make the best electro/thermal/physical decisions to achieve the best power/performance/area/cost (PPAC), factors can include accurate die size estimations, thermal feasibility, die-to-die interconnect planning, interposer planning (silicon/organic), front-to-front and front-to-back (F2F/F2B) planning, layer stack and electromigration/ IR drop (EMIR)/TSV planning, IO bandwidth feasibility, and system-level architecture selection.

3D-IC Power Network Design and Analysis

The key to success in 3D-IC design is early power integrity planning and analysis. Cadence’s Integrity 3D-IC platform is a high-capacity 3D-IC platform that enables 3D design planning, implementation, and system analysis in a single, unified cockpit. Cadence’s Voltus IC Power Integrity Solution is a comprehensive full chip electromigration, IR drop, and power analysis solution. With its fully distributed architecture and hierarchical analysis capabilities, Voltus provides very fast analysis and has the capacity to handle the largest designs in the industry. Typically, 3D-IC PDN design and analysis is performed in four phases, as shown in Figure 1.

Phase 1 - Perform early power delivery network (PDN) exploration with each fabric’s PDN cascaded in system PI with early circuit models.

Phase 2 – Plan 3D-IC PDNs in Cadence’s Integrity 3D-IC platform, including micro bumps, TSVs, and through dielectric vias (TDVs), power grid synthesis for dies, and early rail analysis and optimization.

Phase 3 – Perform full chip-centric signoff in Voltus with detailed die, interposer, and package models, including chip die models, while keeping some dies flat.

Phase 4 – Perform full system-level signoff with Cadence’s Sigrity SystemPI using detailed extracted package models from Sigrity XtractIM, board models from Sigrity PowerSI or Clarity 3D Solver, interposer models from XtractIM or Voltus, and chip power models from Voltus.

Figure 1. 3D-IC PDN design and analysis phases

3D-IC Chip-Centric Signoff

The integration of Integrity 3D-IC and Voltus enables chip-centric early analysis and signoff. Figure 2 and Figure 3 highlight the chip centric early PI optimization and signoff flows. In early analysis, the on-chip power networks are synthesized, and the micro bumps and TSVs can be placed and optimized. In the signoff stage, all the detailed design data is used for power analysis, and detailed models are extracted and used for package, interposer, and on-die power networks.

Figure 2. Early chip-centric PI analysis and optimization flow

Figure 3. Chip-centric 3D-IC PI signoff

Hierarchical 3D-IC PI Analysis

To improve the capacity and performance of 3D-IC PI analysis, Voltus enables hierarchical analysis using chiplet models. Chiplet models can be reduced chip models in spice format or more accurate xPGV models which are highly accurate proprietary models generated by Voltus. With xPGV models, the hierarchical PI analysis has almost the same accuracy as flat analysis but offers 10X or higher benefit in runtime and memory requirements.

Conclusion

This blog has highlighted the major design trends enabled by advanced 3D packaging and the design challenges arising from these advancements. The design of power delivery networks is one of these major challenges. We have discussed Cadence solutions to overcome this PI challenge. To learn more, view our recent webinar, "Addressing 3D-IC Power Integrity Design Challenges" and visit the Voltus web page.

When it comes to system integration, PCB designers need to collaborate with the signal analysis or integrity team to run pre-route or post-route analysis and modify constraints, floorplan, or topology based on the results. Allegro PCB Edito...(read more)

Live Doc is an advanced automated PCB documentation generation tool integrated with OrCAD X Presto designed to streamline the creation of PCB documentation. By automating the generation of PCB fabrication and assembly drawings, Live Doc significantly...(read more)

Does anyone know whether it is possible to have multiple contact points for a bond wire on a large die pad? Note: This is different from adding multiple wires which I will also be doing. I need to add multiple bond connections to the same large die pad for redundancy connections to each pad for each wire. I have a large die pad which I need to have 5 wires with each wire having 3 bond connections to the same die pad.

Starting SPB 23.1, in Allegro X PCB Editor and Allegro X Advanced Package Designer, you can align components by using offset mode. Earlier only spacing mode was available.

Follow these steps to Align Components using Offset Mode:

1. Set Application Mode to Placement Edit.
2. Drag the components that need to be aligned and right-click and choose Align Components.
3. Now, in the Options tab, you will notice Spacing Section with Equal Offset. You can equally and individually offset the components by using the +/- buttons for increment or decrement.

Starting SPB 23.1, Allegro Package Designer Plus (APD+) has been rebranded as Allegro X Advanced Package Designer (Allegro X APD).

The splash screen for Allegro X APD will appear as shown below, instead of showing APD+ 2023:

For the Windows Start menu in 23.1, it will display as Allegro X APD 2023 instead of APD+ 2023, as shown below

23.1 Start menu 

In the Product Choices window for 23.1, you will see Allegro X Advanced Package Designer in the place of Allegro Package Designer +, as shown below: 

23.1 product title

Have you heard that starting SPB 23.1, Allegro Package Designer Plus (APD+) will be renamed as Allegro X Advanced Package Designer (Allegro X APD)? 

Allegro X APD offers multiple new features and enhancements on topics like Via Structures, Wirebond, Etchback, Text Wizards, 3D Canvas, and more. 

This post presents the new 3DX Canvas introduced in SPB 23.1. This can be invoked from Allegro X APD (from the menu item View > 3DX Canvas). 

Some of the key benefits of the new canvas: 

• This canvas addresses the scale and complexity in large modern package designs. It provides highly efficient visual representation and implementation of packages. 
  
• The new architecture enables high-performance 3D incremental updates by utilizing GPU for fast rendering. 
  
  
• Real-time 3D incremental updates are supported, which means that the 3D view is in sync with all changes to the database. 
  
  
• The new canvas provides 3D visualization support for packaging objects such as wire bonds, ball, die bump/pillar geometries, die stacks, etch back, and plating bar. 
  
  
• This release also introduces the interactive measurement tool for a 3D view of packages. Once you open 3DX Canvas, press the Alt key and you can select the objects you want to measure. 
  
• 3DX Canvas provides new 3D DRC Bond Wire Clearances with Real 3D DRC Checks. True 3D DRC in Constraint Manager has been introduced. If you open Constraint Manager, there will be a new worksheet added. Following DRC checks are supported: 

  Wire to Wire 
  Wire to Finger 
  Wire to Shape 
  Wire to Cline 
  Wire to Component

Have you ever encountered ERROR(SPMHNI-67) while importing logic? If yes, you might already know that you had to export libraries of the design and make sure that paths (devpath, padpath, and psmpath) include the location of exported files.  

Starting in SPB23.1, if you go to File > Import > Logic/Netlist and click on the Other tab, you will see an option, Reuse device files for existing components. 

After selecting this option, ERROR(SPMHNI-67) will no longer be there in the log file, because the tool will automatically extract device files and seamlessly use them for newly imported data. In other words, SPB_23.1 lets you reuse the device / component definitions already in the design without first having to dump libraries manually. An excellent improvement, don’t you think?  

Starting from SPB23.1, a new option, Allow DRCs to surrounding metal, has been added in the Etch-Back form to allow DRCs to the surrounding objects. form to allow DRCs to the surrounding objects.

The Allow DRCs to surrounding metal option lets you see and adjust objects instead of the current behavior, which sacrifices the width of the mask for the trace.

• When this option is turned off, it maintains the EB mask to another object clearance.
• When this option is enabled, it keeps the EB mask to the EM trace edge clearance and shows a DRC if the EB mask to another object spacing is out of rule.

Starting SPB 23.1, a new pin property, WIREBOND_PROFILE_NAME is introduced. This property can be used to define a wirebond profile to a die pin. When adding a wirebond, the pin will use the profile defined in the WIREBOND_PROFILE_NAME property associated to the die pin.

Assign the WIREBOND_PROFILE_NAME property to the die pin using Edit > Properties and set the desired wirebond profile name in the Value field.

The following image displays the WIREBOND_PROFILE_NAME property assigned to the pin and wire profile of the Wire Bond for that pin.

Have you ever thought of a handy utility to specify all necessary transmission line parameters to decide upon the stackup?   

Starting SPB 23.1, a handy feature Transmission Line Calculator, is built into Allegro X Advanced Package Designer (Allegro X APD). This feature will require either an SiP Layout license or can be accessed through SiP Layout Bundle. 

From the Analyze dropdown menu in the 23.1 Allegro X APD toolbar, you can choose Transmission Line Calculator. 

You can use this calculator to help decide constraints and stackup for laminate-based PCB or Packages. You can calculate the correct stackup material and width/spacing to meet any requirements that may be later entered in a constraint. This is truly a calculated number and not a true field solver. 

The different types of calculations that the Transmission Line Calculator can provide are Microstrip, Embedded microstrip, Stripline, CPW (Coplanar), FGCPW (frequency-dependent Coplanar), Asymmetric stripline, Coupled microstrip (Differential Pair), Coupled stripline (Differential Pair), and Dual striplines. 

This feature is important for customers relying on fabricators/spreadsheets to provide this information or need to test a quick spacing/width as per the impedance value. 

Let us know your comments on this new feature in 23.1 Allegro X APD. 

The vision manager is good tool for routing check. but no quickly or effective  tool to fix or optimize this  problems to be optimized.

For example, parallel Gap less than preferred, min seg/Arc length,uncoupled diff-pair segs，and so on.

I only know use spread between voids to fix the non-optimized segs. in fact it is inefficient.

the parallel gap less than preferred is only to slice evry trace, its inefficient.

If i set the paraller gap less than 50um, Is there any tool to quickly fix these problems（gap less than 50um）?

For other problems，i can use tool to quickly fix the min seg/Arc length，uncoupled diff pair segs，accoding to select by polygon or select  by windows.

Hi，

There are mang components in BGA ball side of flipchip package.

Are there DFA check space of compont body or pin soldermask to BGA ball or BGA PAD or bga  soldermask in allegro APD?

I only find space of compont to compont in APD DFA. 

In a package design, designers often need to perform degassing. This is typically done at the end of the design process before sending the design to the manufacturer.

Degassing is a process where you perforate power planes, voltage planes, and filled shapes in your design. Degassing holes let the gas escape from beneath the metal during manufacturing of the substrate. The perforations or holes for degassing are generally small, having a specified size and shape, and are spaced regularly across the surface of the plane. If the degassing process is not done, it may result in the formation of gas bubbles under the metal, which may cause the surface of the metal to become uneven. After you degas the design, it is recommended to perform electrical verification.

Allegro X APD has degassing features that allow users to automate the process and place holes in the entire shape.

In today’s topic, we will talk about how to avoid adding  degassing holes on a particular shape.

Sometimes, a designer may need to avoid adding degassing holes to a particular shape on a layer. All other shapes on the layer can have degassing holes but not this shape. Using the Layer Based Degassing Parameters option, the designer can set the degassing parameters for all shapes on the layer. Now, the designer would like to defer adding degassing holes for this particular shape.

You may wonder if there is an easy way to achieve this. We will now see how this can be done with the tool.

Once the degassing parameters are set, performing Display > Element on any of the shapes on that layer will show the degassing parameters set.

You can apply the Degas_Not_Allowed property to a shape to specify that degassing should not be performed on this shape, even if the degassing requirements are met. Select the shape and add the property as shown below.

Switch to Shape Edit application mode (Setup > Application mode > Shape Edit) and window-select all shapes on the layer. Then, right-click and select Deferred Degassing > All Off.

Now, all shapes on the layer will have degassing holes except for the shape which has the Degas_Not_Allowed property attached to it.

By default, a dielectric must separate each pair of conductor layers in the cross-section of a design. In rare cases, this does not represent the real, manufactured substrate.

If your design requires you to have conductor layers that are not separated by a dielectric (such as, for half-etch designs), there is a variable that needs to be set in Allegro X APD. You must set this by enabling the variable icp_allow_adjacent_conductors. This entry, and its location in the User Preferences Editor, are shown in the following image.

The Objects on adjacent conductor layers do not electrically connect together, automatically. A via must be used to establish the inter-layer connections.

When enabling this option, it is recommended to exercise caution because excluding dielectric layers from your cross-section can lead to inaccurate calculations, including the calculations for signal integrity and via heights. It is important that your cross-section accurately reflect the finished product to ensure the most accurate results possible. Any dielectric layers present in the manufactured part need to be in the cross-section for accurate extraction, 3D viewing, and so on.

Let us know your comments on the various designs that would require adjacent conductor layers.

Power and Ground rings are exposed rings of metal surrounding a die that supply power/ground to the die and create a low-impedance path for the current flow. These rings ensure stable power distribution and reduce noise. Allegro X Package Designer Plus has a utility called Power/Ground Ring Generator which lets you define and place one or more shapes in the form of a ring around a die.

 To run the PWR/GND Generator Wizard, go to Route > Power/Ground Ring Generator or type "pring wizard" in the APD command window to invoke the Wizard.

This Wizard lets you define and place one or more shapes in the form of a ring around a die. The Power/Ground Ring Wizard creates up to 12 rings (shapes) at a time. If you require more rings, you can run the Power/Ground Ring Wizard as many times as needed. This command displays a wizard in which you can specify:

• The number of rings to be generated
• The creation of the first ring as a die flag (Die flag is the boundary of the die like the power ring.)
  • If you create a die flag and the first ring is the same net as the flag, you can enter a negative distance to overlap the ring and the die flag.
• Multiple options for placement of the rings with respect to:
  • Origination point
  • Distance from the edge of the die
  • Distance from the nearest die pin on each die side
• The reference designator of the die with which the rings will be used
• The distance between rings
• The width of each ring
• The corner types on each ring (arc, chamfer, and right-angle)
• An assigned net name for each ring
• A label for each ring

The rings are basic in nature. For other shape geometries or split rings, choose Shape > Polygon or Shape > Compose/Decompose Shape from the menu in the design window.

Depending on the options selected, the Power/Ground Ring Wizard UI changes, representing how the rings will be created. Verify the Wizard settings to ensure that the rings are created as intended.

1. When the Power/Ground Ring Wizard appears, set the number of rings to 2, accept the other defaults, and click Next. You can set Create first ring as die flag to create a basic die flag.

         2. Define Ring 1 and the net associated with it.

              a) Browse and choose Vss in the Net Names dialog box.

            b) Click OK.

            c) Specify the label as VSS.

            d) Click Next.

             The first ring should appear in your design. It is associated with the proper net; in this case, VSS.

2. For the second ring, choose the net as Vdd and specify the label as VDD.
3. Click Next.
4. Click Finish in the Result Verification screen to complete the process.

The completed rings appear as shown below.

Now, when you click on Power and Ground Die Pin and add wirebonds, you will see that the wirebonds are placed directly on the Power and Ground rings.

Hello, SKILL experts. 

I'm studying SKILL language to build some useful function in APD+.

Now, I want to execute 'Import Sub-drawing' function in new form.

But I cannot find how to do execute APD+ embedded function in a field of new form. 

Has anyone experienced this or idea to solve this problem? 

When things go wrong with your package design flow, it can sometimes be difficult to understand the cause of the issue. This can be something like a die component is wrongly identified as a BGA, a via stack has an alignment issue, or there are duplicate bondwires. These are just a few examples of issues; there can be many more. When interactive messages and log files do not help determine the problem, the Package Design Integrity Check tool becomes very handy. This feature lets you run integrity checks, which ensures that the database is configured correctly. 

To invoke the command from Allegro X Advanced Package Designer, use the Tools > Package Design Integrity menu. 

Or type package integrity at the Command  prompt. 

The Package Design Integrity Checks dialog box includes all categories and checks currently registered for the currently running product. You can enable all these categories and checks or only the one that you want to run. This utility can fix errors automatically (where possible). Errors and warnings are written to the “package_design_check.log” file.  

The utility can also be extended with your own custom rules based on your specific flows and needs. 

The DBDoctor application checks the database for errors and other problems, and presents a report about them. DBDoctor supports .brd, .mcm, .mdd, .psm, .dra, .pad, .sav, and .scf databases.

DBDoctor can:

• Analyze and fix database problems.
• Eliminate duplicate vias.
• Perform batch design rule checking (DRC).
• Upgrade databases more than one revision old.

To verify the integrity of a drawing database at any time during the design cycle, run DBDoctor at regular intervals but make sure you always run it after completing a design.

You can run DBDoctor to verify work in progress, or from a terminal window outside the layout editor, perhaps to check multiple input designs in batch mode by using wildcards and various switches. You do not have to run the layout editor to use DBDoctor.

To run this from Allegro X APD and Allegro PCB Editor, go to Tools > Database Check.

You can also go to the Start menu and select Cadence PCB Utilities 2023 > PCB DB Doctor 2023.

You can also use the following command to run DBDoctor in batch mode in the system command prompt:

dbdoctor [-check_only] [-drc] [-drc_only] [-shapes][-no_backup] [-outfile <newboardname.brd>]>

Comment below if you want to know more about this command and its integration with SKILL programming!!

Display Stream Compression (DSC) is a lossless or near-lossless image compression standard developed by the Video Electronics Standards Association (VESA) for reducing the bandwidth required to transmit high-resolution video and images. DSC compresses video streams in real-time, allowing for higher resolutions, refresh rates, and color depths while minimizing the data load on transmission interfaces such as DisplayPort, HDMI, and embedded display interfaces.

Why Is DSC Needed?

In the ever-evolving landscape of display technology, the pursuit of higher resolutions and better visual quality is relentless. As display capabilities advance, so do the challenges of managing the immense amounts of data required to drive these high-performance screens. This is where DSC steps in. DSC is designed to address the challenges of transmitting ultra-high-definition content without sacrificing quality or performance. As displays grow in resolution and capability, the amount of data they need to transmit increases exponentially. DSC addresses these issues by compressing video streams in real-time, significantly reducing the bandwidth needed while preserving image quality.
 

DSC Use in End-to-end System

DSC Key Features

• Encoding tools:
  • Modified Median-Adaptive Prediction (MMAP)
  • Block Prediction (BP)
  • Midpoint Prediction (MPP)
  • Indexed color history (ICH)
  • Entropy coding using delta size unit-variable length coding (DSU-VLC)

• The DSC bitstream and decoding process are designed to facilitate the decoding of 3 pixels/clock in practical hardware decoder implementations. Hardware encoder implementations are possible at 1 pixel/clock.
• DSC uses an intra-frame, line-based coding algorithm, which results in very low latency for encoding and decoding.

DSC encoding algorithm
 

• Compression can be done to a fractional bpp. The compressed bits per pixel ranges from 6 to 63.9375.
• For validation/compliance certification of DSC compression and decompression engines, cyclic redundancy checks (CRCs) are used to verify the correctness of the bitstream and the reconstructed image.
• DSC supports more color bit depths, including 8, 10, 12, 14, and 16 bpc.
• DSC supports RGB and YCbCr input format, supporting 4:4:4, 4:2:2, and 4:2:0 sampling.
• Maximum decompressor-supported bits/pixel values are as listed in the Maximum Allowed Bit Rate column in the table below

• DP DSC Source device shall program the bit rate within the range of Minimum Allowed Bit Rate column in the table:

Summary

Display Stream Compression (DSC) is a technology used in DisplayPort to enable higher resolutions and refresh rates while maintaining high image quality. It works by compressing the video data transmitted from the source to the display, effectively reducing the bandwidth required. DSC uses a visually lossless algorithm, meaning that the compression is designed to be imperceptible to the human eye, preserving the fidelity of the image. This technology allows for smoother, more detailed visuals at higher resolutions, such as 4K or 8K, without requiring a significant increase in data bandwidth.

More Information

• Cadence has a very mature Verification IP solution. Verification over many different configurations can be used with DisplayPort 2.1 and DisplayPort 1.4 designs, so you can choose the best version for your specific needs.
• The DisplayPort VIP provides a full-stack solution for Sink and Source devices with a comprehensive coverage model, protocol checkers, and an extensive test suite.
• More details are available on the DisplayPort Verification IP product page, Simulation VIP pages.
• If you have any queries, feel free to contact us at talk_to_vip_expert@cadence.com

Verisium SimAI App harnesses the power of machine learning technology with the Cadence Xcelium Logic Simulator - the ultimate breakthrough in accelerating verification closure. It builds models from regressions run in the Xcelium simulator, enabling the generation of new regressions with specific targets. The Verisium SimAI app also features cousin bug hunting, a unique capability that uses information from difficult-to-hit failures to expose cousin bugs. With these advanced machine learning techniques, Verisium SimAI offers the potential for a significant boost in productivity, promising an exciting future for our users.

Figure 1: Regression compression and coverage maximization with Verisium SimAI 

What can I do with Verisium SimAI?

You can exercise different use cases with Verisium SimAI as per your requirements. For some users, the goal might be regression compression and improving coverage regain. Coverage maximization and hitting new bins could be another goal. Other users may be interested in exposing hard-to-hit failures, bug hunting for difficult to find issues. Verisium SimAI allows users to take on any of these challenges to achieve the desired results.

Let's go into some more details of these use cases and scenarios where using SimAI can have a big positive impact.

1. Using SimAI for Regression Compression and Coverage Regain

Unlock up to 10X compute savings with SimAI!

Verisium SimAI can be used to compress regressions and regain coverage. This flow involves setting up your regression environment for SimAI, running your random regressions with coverage and randomization data followed by training, and finally, synthesizing and running the SimAI-generated compressed regressions. The synthesized regression may prune tests that do not help meet the goal and add more runs for the most relevant tests, as well as add run-specific constraints. This flow can also be used to target specific areas like areas involving a high code churn or high complexity.

You can check out the details of this flow with illustrative examples in the following Rapid Adoption Kits (RAK) available on the Cadence Learning and Support Portal (Cadence customer credentials needed):

• Using SimAI with vManager (For Regression Compression and Coverage Regain) (RAK) 
• Using SimAI with a Generic Runner (For Regression Compression and Coverage Regain) (RAK)

2. Using SimAI for Coverage Maximization and Targeting coverage holes

Reduce your Functional Coverage Holes by up to 40% using SimAI!

Verisium SimAI can be used for iterative coverage maximization. This is most effective when regressions are largely saturated, and SimAI will explicitly try to hit uncovered bins, which may be hard-to-hit (but not impossible) coverage holes. This is achieved using iterative learning technology where with each iteration, SimAI does some exploration and determines how well it performed. This technique can also be used for bug hunting by using holes as targets of interest.

See more details on the Cadence Learning and Support Portal:

• Using SimAI for Coverage Maximization - vManager flow (RAK) 
• Using SimAI for Coverage Maximization - Generic Runner Flow (RAK)

3. Using SimAI for Bug Hunting

Discover and fix bugs faster using SimAI!

Verisium SimAI has a new bug hunting flow which can be used to target the goal of exposing hard-to-hit failure conditions. This is achieved using an iterative framework and by targeting failures or rare bins. The goal to target failures is best exercised when the overall failure rate is typically low (below 5%). Iterative learning can be used to improve the ability to target specific areas. Use the SimAI bug hunting use case to target rare events, low hit coverage bins, and low hit failure signatures.

See more details on the Cadence Learning and Support Portal:

• Using SimAI for Bug Hunting with vManager (RAK) 
• Using SimAI for Bug Hunting – Generic runner flow (RAK) 

Unlock compute savings, reduce your functional coverage holes, and discover and fix bugs faster with the power of machine learning technology now enabled by Verisium SimAI!

Please keep visiting  https://support.cadence.com/raks to download new RAKs as they become available.

Please note that you will need the Cadence customer credentials to log on to the Cadence Online  Support  https://support.cadence.com/, your 24/7 partner for getting help in resolving issues related to Cadence software or learning Cadence tools and technologies.

Happy Learning!

As technology continues to evolve at a rapid pace, the importance of robust and efficient interconnect standards cannot be overstated. Peripheral Component Interconnect Express (PCIe) has been a cornerstone in high-speed data transfer, enabling seamless communication between various hardware components.   

With the advent of PCIe 6.1 ECN, a significant advancement in speed and efficiency, ensuring the accuracy and reliability of its operations is paramount. One critical aspect of this is the verification of shared credit updates. For detailed understanding on Shared Credit, please refer Understanding PCIe 6.0 Shared Flow Control. 

In this blog, we will discuss why this verification is essential and what it entails.  

Introduction 

PCIe 6.1 ECN brings numerous advancements over earlier versions, such as increased bandwidth and faster data transfer speeds.   

A crucial mechanism for efficient data transmission in PCIe 6.0 is the credit-based flow control system. In this system, devices monitor credits, representing the buffer capacity available for incoming data.   

When a device transmits data, it uses credits, which are replenished or adjusted once the data is received and processed. This system ensures that the sender does not overload the receiver.  

Given the critical role of shared credit updates in maintaining the integrity and efficiency of data transfers, verification of these updates is crucial.  Proper management of credit updates is essential to ensure data integrity, as any discrepancies can lead to data loss, corruption, or system crashes.   

Verification also guarantees efficient resource allocation, preventing scenarios where some components are starved of credit while others have an excess, thus avoiding inefficiencies.  Credit inefficiencies pose issues in low power negotiations by preventing devices from entering low power states. Additionally, verification involves checking for proper error handling mechanisms, ensuring that the system can recover gracefully from errors in credit updates and maintain overall stability.   

PCIe 6.1 ECN Flow Control Optimizations Over PCIe 6.0

PCIe 6.1 ECN builds on the FLIT-based architecture introduced in PCIe 6.0, further optimizing flow control mechanisms to handle increased data rates and improved efficiency.  PCIe 6.1 ECN introduced refinements in credit management, making the allocation and advertisement of credits more precise, which helps in reducing bottlenecks and improving data flow efficiency.  Enhancements in flow control protocols ensure better management of buffer spaces and more efficient credit allocation. These enhancements are designed to handle the increased data rates and throughput demands of next-generation applications, ensuring robust and efficient data flow across PCIe devices.  

Below are some major updates: 

1. There have been improvements in error detection and correction mechanisms in PCIe 6.1 ECN to enhance flow control reliability by ensuring that corrupted data packets are detected and handled appropriately without disrupting the flow of valid packets.  
2. The merged credit system, which was a key feature introduced int PCIe 6.0 to simplify and optimize credit management, was further enhanced in PCIe 6.1 ECN to improve performance and efficiency.  
3. PCIe 6.1 ECN introduced better algorithms for allocating and reclaiming merged credits to handle high data rates, introduced more robust error detection and correction mechanism reducing the degradation or system instability. 
4. PCIe 6.1 ECN provided clear guidelines on how to implement the merged credit system correctly, helping developers to implement more reliable systems. For more details, please refer to Specifications section 2.6.1 Flow Control (FC) Rules.

Summary 

In summary, PCIe 6.0 is a complex protocol with many verification challenges. You must understand many new Spec changes and think about the robust verification plan for the new features and backward compatible tests impacted by new features. Cadence’s PCIe 6.0 Verification IP is fully compliant with the latest PCIe Express 6.0 specifications and provides an effective and efficient way to verify the components interfacing with the PCIe 6.0 interface. Cadence VIP for PCIe 6.0 provides exhaustive verification of PCIe-based IP and SoCs, and we are working with early adopter customers to speed up every verification stage.   

More Information

For more info on how Cadence PCIe Verification IP and Triple Check VIP enable users to confidently verify PCIe 6.0, see VIP for PCI Express, VIP for Compute Express Link  and TripleCheck for PCI Express    

See the PCI-SIG website for more details on PCIe in general and the different PCI standards.  

For more information on PCIe 6.0 new features, please visit PCIeLaneMargin, PCIe6.0LaneMargin, and Demonstrating PCIe 6.0 Equalization Procedure.

The Cadence Palladium Emulation Platform is a hardware system that implements the design, accelerating its execution and verification. Itoffers the highest performance and fastest bring-up times for pre-silicon validation of billion-gate designs, using a custom processor built by Cadence.

This Palladium Introduction course is based on the Palladium 23.03 ISR4 version and covers the following modules:

• Introduction
• Palladium flow
• Running a design on the Palladium system

This course starts with an “Introduction” module that explains Palladium and other verification platforms to show its place in the big picture. It also compares Palladium with Protium and simulation and discusses its usage and limitations.

The “Palladium Flow” module includes two stages at a high level, which are Compile and Run. Then, it covers these stages in detail. First, it covers the ICE compile flow and IXCOM compile flow steps in detail. Then it explains Run, which is common for both ICE and IXCOM modes.

The third module, “Running Design on the Palladium System,” covers all the items required for running your design on the Palladium system, including:

• Software stack requirements
• Basic concepts required to understand the flow
• Compute machine requirements

In addition, this course contains labs for both the ICE and IXCOM flows with detailed steps to exercise the features provided by the Palladium system. The lab explains a practical example of multiple counters and exercising their signals for force, monitor, and deposit features, along with frequency calculation using a real-time clock. The course is available on the Cadence support page:

There is also a Digital Badge available. You will find the Badge exam opportunity when you enroll in the Online training or after you have taken the training as "live" training.

For questions and inquiries, or issues with registration, reach out to us at Cadence Training. Want to stay up to date on webinars and courses? Subscribe to Cadence Training emails. To view our complete training offerings, visit the Cadence Training website.

Related Training Bytes

• Palladium: What Are Verification Platforms
• Palladium: What Is Processor Based Emulation
• Palladium: Comparing Emulation (Z2) and Prototyping (X2)
• Palladium: What Are ICE and IXCOM Compile Flow
• Palladium: How to Process a Design to Run on Palladium
• Palladium: XCOM Compile Flow (TB+RTL to Palladium Database)
• Palladium: ICE Compile Flow (RTL to Palladium Database)
• Palladium: Legacy ICE Compile Flow
• Palladium: Cadence Software Releases for Palladium and Protium Flow
• Palladium: Setting of PATHs for Using Palladium
• Palladium: Z2 Hardware Structure (Blade and Boards)
• Palladium: What Is Sourceless and Loadless nets
• Palladium: Design Clocks
• Palladium: Step Count and Step Clock
• Palladium: Steps for Running the Design on Palladium Z2

Related Courses

• Verilog Language and Application Training
• SystemVerilog for Design and Verification
• Xcelium Simulator

Related Blogs

• Training Insights – A New Free Online Course on the Protium System for Beginner and Advanced Users
• It’s the Digital Era; Why Not Showcase Your Brand Through a Digital Badge!
• Training Insights - Free Online Courses on Cadence Learning and Support Portal

The course "Jasper Formal Fundamentals v24.03" introduces formal analysis to those who want to use formal analysis for design or verification. 

To optimally benefit from this course, you must already have sufficient knowledge of the System Verilog assertions to be capable of writing properties for formal verification. Hence, this training provides a module on formal analysis to help cover this essential background. 

In this course, you will learn how to code efficient SVA Properties for formal analysis, understand formal complexity and how to overcome it, and learn the basics of formal coverage.

After completing this course, you will be able to:

• Define reusable, functionally correct SVA properties that are efficient for formal tools. These shall use abstract auxiliary code to simplify descriptions, make code maintenance easier, reduce debug time, and reduce tool-proof runtime.
• Set up, run, and analyze results from formal analysis.
• Identify designs upon which formal is likely to be successful while understanding formal complexity issues and how to identify and overcome them.
• Use a systematic property development process to approach a completely new verification problem.
• Understand the basics of formal coverage.

 The most recently updated release includes new modules on:

• "Basic complexity handling" which discusses the complexity in formal and how to identify and handle them.
• "Complexity reduction methods” which discusses the complexity reduction methods and which is suitable for which type of complexity problem.
• “Coverage in formal” which discusses the basics of coverage in formal verification and how coverage can be used in formal.   

Take this course to learn the basics of formal verification. 

What's Next? 

You can check out the complete training: Jasper Formal Fundamentals. There is a free online version of the training available 24/7 for all customers with a Cadence Learning and Support Portal account. If you are interested in an instructor-led version of the training, please contact Cadence Training. And don't forget to obtain your digital badge after completing the training!

You can also check Jasper University page for more materials on formal analysis and Jasper apps. 

Related Trainings 

Jasper Formal Expert Training Course | Cadence

Verilog Language and Application Training Course | Cadence

SystemVerilog for Design and Verification Training Course | Cadence

SystemVerilog Assertions Training Course | Cadence

Related Training Bytes 

Jasper Formal Property Verification (FPV) App: Basic Usage Demo (Video)

Jasper Formal Methodology playlist

Related Training Blogs

It’s the Digital Era; Why Not Showcase Your Brand Through a Digital Badge!

Training Insights: Introducing the C++ Course for All Your C++ Learning Needs!

Training Insights: Reaching Your Verification Closure Using Verisium Manager

Training Insights - Free Online Courses on Cadence Learning and Support Portal

Cadence PCIe/CXL VIP support for Partial Header Encryption in Integrity and Data Encryption.(read more)

Verisium Debug, the Cadence unified debug platform, offers a variety of debugging capabilities, including RTL debug, UVM testbench debug, UPF debug, and DMS debug. From IP to SoC level debug, the user can take the benefits of the rich debugging features to reduce the time for debug.

Not only the common and advanced debug features, Verisium Debug also provides Python-based interface API, which enables capabilities allowing users to customize functions with Verisium Debug Python API to access from design, waveform databases and add functions to Verisium Debug’s GUI for visualization purposes. With Verisium Debug’s Python API, users can turn repetitive works into automatic programs or reduce efforts to create in-house utilities with well-established infrastructure from Verisium Debug.

Here is an example of how the user uses Python API to create a customized function. Users can write a Python program to extract signals in a specific design scope and report the values of the extracted signals. From Fig 1., you can understand the procedure of the traversal steps.

1. Import Python library in Verisium Debug package.
2. Setup the database for traversal.
3. Search the scope with the hierarchy information in the design DB.
4. Query the signal list and the values of the signals.
5. Print out the results.

Fig 1. Procedure of Verisium Debug Python Program

The result from the Verisium Debug Python App can be used for post-process design checking or fed into other utilities in the design flow.

The concept is very straightforward. With Verisium Debug and the Python API environment enabled, you can easily query any information that is stored in the databases of Verisium Debug. The result can be outputted in text format, or you can also use the API to display the results back to Verisium Debug’s GUI.

The Verisium Debug Python API is an important capability and resource for Verisium Debug users. To make Verisium Debug Python API easier to access, from Verisium Debug 24.10 release, Verisium Debug introduced the new Verisium Debug Python App Store.

Fig 2. Verisium Debug App Store

The Python App Store includes ready-to-use Python App examples with the availabilities of original source code documents, which help the user to understand how to start writing an app that fits their use case.

Fig 3. Example apps in Verisium Debug App Store

The Verisium Debug Python App Store can also be used by a team as an app management system. App creators can share the developed apps across teams within their companies. The in-house created apps will become easy to manage, and engineers can easily access the apps from the central location, which makes it possible for users to see the updated available Verisium Debug Apps from the Verisium Debug App Store.

Check the following videos for more information about Verisium Debug Python API:

Customize Verisium Debug with Python API

Verisium Debug Customized Apps with Python API

In SoC development, the verification cycle is a crucial phase that ensures products meet their specifications and function correctly. However, the complexity of modern SoC projects, with their constant data flow, multiple validation teams working in parallel, and tight schedules, presents significant challenges. This article explores these challenges and introduces Verisium Manager as a solution that embodies the 'One Tool Fits All' concept. This means that Verisium Manager is designed to handle all aspects of the verification process for SoC development, from planning to coverage analysis to regression testing, thereby addressing the complex needs of SoC verification.

The Hurdles in Traditional Validation Cycles

 A typical validation process involves planning, coverage analysis, and regression testing. This complexity is compounded by using separate tools for each activity, leading to multiple control environments, APIs, and databases, not to mention the array of tool owners. Such fragmentation results in constant data transfer and translation between systems, from the planning tool to the coverage analysis tool and then to the regression testing tool. This continuous movement of data causes delays, system instability, poor user experiences, and, ultimately, a dip in the quality of the validation process.

The use of multiple platforms leads to inefficiency and reduced productivity. What's needed is a unified system that can streamline the workflow, simplify the verification process, and enhance its effectiveness.

Envisioning the Ideal Solution: Verisium Manager

 The cornerstone of an efficient validation cycle is integration and simplicity. The ideal solution is a singular platform that consolidates planning, coverage analysis, and regression management into one smooth, unified process. Verisium Manager emerges as this much-needed solution, encompassing all the functionalities necessary to streamline the validation process. Its comprehensive nature instills confidence in its ability to handle all aspects of the verification cycle. It can be fully customized to address and enforce any validation methodology and can facilitate smooth integration into any customer environment.

Features that stand out in Verisium Manager include: 

• Unified Workflow: It acts as a single cockpit from which all activities are orchestrated, ensuring the validation teams' work is uninterrupted and seamlessly integrated.
• Customization and Integration: Verisium Manager supports customizing test-plan structures and mapping results per project, ensuring a perfect fit for various project requirements. Its ability to smoothly integrate into the project's environment and compute platforms is unparalleled.
• Support for Continuous Updates and Migration: The tool accommodates constant updates to project data and supports the migration of legacy data, ensuring that no historical data is lost in the transition to a new system.

Addressing Project-Specific Needs

 Verisium Manager recognizes diversity in different projects and offers project-specific solutions, including:

 Enforcing Project Test-Plan Structures and Attributes: It supports and enforces each project's unique test-plan structure and mapping guidelines.

• Unified Data Views and Measurements: Verisium Manager promotes a unified view of data across all teams and enforces unified measurements, ensuring consistency and clarity in the validation process.
• Enabling Project-Specific Actions and Integrations: The tool is designed to support project-specific actions directly from its graphical user interface and allows for smooth integration with in-house databases, dashboards, and the project execution stack.

Verisium Manager is the epitome of efficiency in software/hardware validation. Its differentiating features, such as support for customization, unified data view, and comprehensive coverage and regression requirements, make it an indispensable tool for any validation team looking to elevate their workflow.

PHY Interface for the PCI Express (PCIe), SATA, USB, DisplayPort, and USB4 Architectures (PIPE) enables the development of the Physical Layer (PHY) and Media Access Layer (MAC) design separately, providing a standard communication interface between these two components in the system.

In recent years, the PIPE interface specification has incorporated many enhancements to support new features and advancements happening in the supported protocols. As the supported features increase, so does the count of signals on PIPE interface. To address the issue of increasing signal count, the message bus interface was introduced in PIPE 4.4 and utilized for PCIe lane margining at the receiver and elastic buffer depth control.

In PIPE 5.0, all the legacy PIPE signals without critical timing requirements were mapped into message bus registers so that their associated functionality could be accessed via the message bus interface instead of implementing dedicated signals. It was decided that any new feature added in the new version of PIPE specification will be available only via message bus accesses unless they have critical timing requirements that need dedicated signals.

Message Bus Interface

The message bus interface provides a way to initiate and participate in non-latency-sensitive PIPE operations using a small number of wires. It also enables future PIPE operations to be added without adding additional wires. The use of this interface requires the device to be in a power state with PCLK running.

Control and status bits used for PIPE operations are mapped into 8-bit registers that are hosted in 12-bit address spaces in the PHY and the MAC. The registers are accessed using read-and-write commands driven over the signals M2P_MessageBus[7:0] and P2M_MessageBus[7:0]. These signals are synchronous with the PCLK and are reset with Reset#.

Message Bus Interface Commands

The 4-bit commands are used for accessing the PIPE registers across the message bus. A transaction consists of a command and any associated address and data.

All the following are time multiplexed over the bus from MAC and PHY:

1. Commands (write_uncommitted, write_committed, read, read completion, write_ack)
2. 12-bit address used for all types and read and writes
3. 8-bit data, either read or written

There can be cases where multiple PIPE interface signals can change on the same PCLK. To address such cases, the concept of write_uncommitted and write_committed is introduced.

The uncommitted write should be saved into a write buffer, and its associated data values are updated into the relevant PIPE register at a future time when a write_committed is received, taking effect during the same PCLK cycle. Once a write_committed is sent, no new writes, whether committed or uncommitted, and any read command may be sent until a write_ack is received. Also, it is allowed to send NOP commands between write uncommitted and write committed. 

A simple timing demonstration of message bus:

Message Address Space

MAC and PHY each implement unique 12-bit address spaces. These address spaces will host registers associated with the PIPE operations. MAC accesses PHY registers using M2P_MessageBus[7:0], and PHY accesses the MAC registers using the M2P_MessageBus[7:0].

The MAC and PHY access specific bits in the registers to: initiate operations, Initiate handshakes, and Indicate status.

Each 12-bit address space is divided into four main regions: the receiver address region, the transmitter address region, the common address region, and the vendor-specific address region.

Each register field has an attribute description of either level or 1-cycle assertion. When a level field is written, the value written is maintained by the hardware until the next write to that field or until a reset occurs. When a 1-cycle field is written to assert the value high, the hardware maintains the assertion for only a single cycle and then automatically resets the value to zero on the next cycle.

Cadence has a mature Verification IP solution for the verification of various aspects and topologies of PIPE PHY design. For more details, you may refer to the Simulation VIP for PIPE PHY | Cadence page, or you may send an email to support@cadence.com.

Cadence Protium prototyping platforms rapidly bring up an SoC or system prototype and provide a pre-silicon platform for early software development, SoC verification, system validation, and hardware regressions. In this Training W ebinar, we will explore debugging using Save/Restart on Protium X2 . This feature saves execution time and lets you focus on actual debugging. The system state can be saved before the bug appears and restartS directly from there without spending time in initial execution. We’ll cover key concepts and applications, explore Save/Restart performance metrics, and provide examples to help you understand the concepts. Agenda: The key concepts of debugging using save/restart Capabilities, limitations, and performance metrics Some examples to enable and use save/restart on the Protium X2 system Date and Time Thursday, November 7, 2024 07:00 PST San Jose / 10:00 EST New York / 15:00 GMT London / 16:00 CET Munich / 17:00 IST Jerusalem / 20:30 IST Bangalore / 23:00 CST Beijing REGISTER To register for this webinar, sign in with your Cadence Support account (email ID and password) to log in to the Learning and Support System*. Then select Enrol to register for the session. Once registered, you’ll receive a confirmation email containing all login details. A quick reminder: If you haven’t received a registration confirmation within 1 hour of registering, please check your spam folder and ensure your pop-up blockers are off and cookies are enabled. For issues with registration or other inquiries, reach out to eur_training_webinars@cadence.com . Want to See More Webinars? You can find recordings of all past webinars here Like This Topic? Take this opportunity and register for the free online course related to this webinar topic: Protium Introduction Training The course includes slides with audio and downloadable lab exercises designed to emphasize the topics covered in the lecture. There is also a Digital Badge available for the training. Want to share this and other great Cadence learning opportunities with someone else? Tell them to subscribe . Hungry for Training? Choose the Cadence Training Menu that’s right for you. To view our complete training offerings, visit the Cadence Training website . Related Courses Protium Introduction Training Course | Cadence Palladium Introduction Training Course | Cadence Related Blogs Training Insights – A New Free Online Course on the Protium System for Beginner and Advanced Users Training Insights – Palladium Emulation Course for Beginner and Advanced Users Related Training Bytes Protium Flow Steps for Running Design on Protium System ICE and IXCOM mode comparison ICE compile flow IXCOM compile flow PATH settings for using Protium System Please see the course learning maps for a visual representation of courses and course relationships. Regional course catalogs may be viewed here

This November, the engineering and simulation community is set to converge in China for an event that promises to be nothing short of revolutionary. The 2024 BETA CAE Systems China Open Meeting, taking place in the vibrant cities of Beijing and Shanghai on November 5 and 7 , respectively, is a must-attend for anyone looking to stay at the forefront of technological innovation in simulation solutions. Prepare to be inspired by Ben Gu , the visionary Corporate VP of Research and Development at Cadence. He will lead both meetings in Beijing and Shanghai with his keynote on " A New Millennium in Multiphysics System Analysis ." This thought-provoking keynote is expected to provide attendees with a glimpse into the future of engineering simulation and analysis. What sets the BETA CAE Systems Open Meetings apart is not just the high caliber of speakers but also the hands-on training sessions designed to enhance your technical expertise with the BETA CAE software suite. Whether you are an inexperienced individual seeking to acquire fundamental knowledge or an accomplished professional endeavoring to hone your expertise, these training sessions following the open meetings are meticulously tailored to meet your needs. Join Us at the BETA CAE Systems Open Meeting in Beijing The BETA CAE Systems Open Meeting in Beijing will feature a keynote speech by Peng Qiao , Senior Engineer at Great Wall Motors Co., Ltd, on Multidisciplinary Optimization Techniques for Automotive Control Arms . ( View detailed agenda for Beijing. ) When: November 5, 2024 Where: Grand Metropark Hotel Beijing If this sounds interesting, register today for the BETA CAE Systems Beijing Open Meeting by clicking the button below. Don't Miss Out on the BETA CAE Systems Open Meeting in Shanghai After the BETA CAE Systems Open Meeting in Beijing, the next meeting in China will be in Shanghai. During this event, Liu Deping, CAE Engineer from Zhejiang Geely Automobile Research Institute Co., Ltd, will deliver a keynote speech on the Application of ANSA in the Simulation Development Cycle . ( View detailed agenda for Shanghai. ) When: November 7, 2024 Where: InterContinental Shanghai Jing'an Following the open meeting on November 7 will be an exclusive training day on November 8. This session will provide attendees with practical experience using the BETA CAE software to improve their technical skills and provide hands-on knowledge of the software. If you find this intriguing, register now for the BETA CAE Systems Shanghai Open Meeting by clicking the button below. Why Attend? Gain firsthand insights into the latest developments in simulation technology Learn from real-world applications and success stories from various industries Connect and exchange ideas with experts in a collaborative environment Mark your calendars for this unparalleled opportunity to explore the forefront of simulation technology. Whether you're aiming to broaden your knowledge, enhance your technical skills, or connect with industry leaders, the BETA CAE Systems Open Meetings are your gateway to the future of engineering. Join us and be part of shaping the next wave of innovation in the simulation world.

Wild River Technology (WRT), the leading supplier of signal integrity measurement and optimization test fixtures for high-speed channels at data rates of up to 224G, has announced the availability of a new advanced channel modeling solution that helps achieve extreme signal integrity design to 70GHz. Read the press release. The CMP-70 program continues the industry-first simulation-to-measurement collaboration with Cadence that was initially established with the CMP-50. Significant resources were dedicated to the development of the CMP-70 by Cadence and WRT over almost three years. The CMP-70 will be on display at DesignCon 2025 , January 28-30, in Cadence booth 827 to benchmark the Cadence Clarity 3D Solver . “I am not a fan of hype-based programs that simply get attention,” remarked Alfred P. Neves, WRT’s co-founder and chief technical officer. “Both Cadence and Wild River brought substantial skills to the table in this project as we continued our industry-first simulation-to-measurement collaboration. The result is a proven, robust and accurate platform that brings extreme signal integrity to 70GHz designs. This application package has also been instrumental in demonstrating the robust 3D EM simulation capability of the Cadence Clarity solver.” “We’re delighted to continue the joint development and validation program with WRT that started with the CMP-50,” said Gary Lytle, product management director at Cadence. “The skilled and experienced signal integrity technologists that both companies bring to the program results in a superior signal integrity solution for our mutual customers.” CMP-70 Solution Features The solution is available both in a standard configuration and as a custom solution for customer-specific stackups and fabrication. The primary target application is to support a 3D EM solver analysis modeling versus the time- and frequency-domain measurement methodologies. The solution features include: The CMP-70 platform, assembled and 100% TDR NIST traceable tested, with custom stands Material Identification overview web-based meeting including anisotropic 3D material identification A cross-section PCB report and structures for using as-fabricated geometries Measured S-parameters, pre-tested for quality (passivity/causality and resampled for time domain simulations) A host of novel crosstalk structures suited for 112G HD level project analysis PCB layout design files (NDA required) An EDA starter library including loss models with industry-first accurate surface roughness models Comprehensive training available for 3D EM analysis – correspondence, material ID in X-Y and Z axis for a host of EDA tools Industry-First Hausdorff Technique The WRT application package also includes an industry-first modified Hausdorff (MHD) technique , included as MATLAB code. This algorithmic approach provides an accurate way to compare two sets of measurements in multi-dimensional space to determine how well they match. The technique is used to compare the results simulated by the Clarity solver with those measured on the CMP-70 platform. The methodology and initial results are shown in the figure below, where the figure of merit (FOM) is calculated from 10, 35, and finally to 50GHz. The MHD algorithm requires a MATLAB license, but WRT also accommodates customer data as another option, where WRT provides the comparison between measured and simulated data. Additional Resources If you are attending DesignCon 2025 , be sure to stop by Cadence booth 827 to see WRT’s CMP-70 advanced channel modeling solution in action with the Clarity 3D Solver. Check out our on-demand webinar, " Validating Clarity 3D Solver Accuracy Through Measurement Correlation ." Learn more about the CMP-70 solution and the Clarity 3D Solver . For more information about Cadence’s full suite of integrated multiphysics simulation solutions, download our Multiphysics System Analysis Solutions Portfolio .

Allegro X System Capture offers a complete ecosystem for library development. This post introduces the latest DE-HDL Library Development using System Capture course in which you learn how to create different library objects. As a librarian, you often work with numerous libraries. Your tasks include creating or modifying symbols for libraries. To use Allegro X System Capture to create a library, you can follow the steps in the following flowchart: Let’s go through each step in detail. Setting the CDS_SITE Variable Before you start library development for a new project, set the CDS_SITE system environment variable. This step is required to access libraries and other configuration files. Creating a Project in Allegro X System Capture The next step is to create a project in Allegro X System Capture. Adding a Library to the Project Symbol development consists of creating symbol graphics, electrical data, and properties used by different tools in the PCB design flow. To add a library to a project, first create a library in the Libraries pane of the Project e xplorer. Creating Library Symbols The library development process supports the creation of various types of symbols. Creating a Symbol with Multiple Views You can generate multiple views of the same symbol using the Duplicate command. For example, a discrete symbol, such as a resistor, can have multiple views, as shown in the following image: Creating a Split Symbol For advanced designs, you often need to create library symbols and break them into multiple sections to support the design process. When a symbol shows all the logical pins in the physical package, it is called a single-section or flat symbol. Many large ICs have several pins and the symbols need to fit on a single schematic page. One workaround is to use vector pin names on a symbol to reduce its size, although manufacturers prefer schematics that show each pin. You can divide these high-pin count devices into smaller pieces, where each piece is a separate version of the part. Such parts are referred to as split parts or multi-section symbols. For multi-section symbols, you can create two types of split parts—symmetrical and asymmetrical. Symmetrical Split Symbols A symmetrical split symbol has only one symbol graphic, which holds two or more identical logic symbols, each with its own unique physical pin numbers. You can create a symmetrical split symbol using the Duplicate Section icon in the canvas window. Each symbol section contains the same set of pins but different pin numbers, as shown in the following image: Asymmetrical Split Symbols An asymmetrical split symbol is a symbol whose physical package contains one or more unique schematic symbols. You can create an asymmetrical split symbol by clicking the New Section icon in the canvas window. Asymmetrical symbols have a unique set of logical pins, as shown in the following image: Creating Symbols Using the Spreadsheet Interface To simplify the development of large symbols, Allegro X System Capture has a Spreadsheet Interface . You can copy from a spreadsheet into the interface. This saves time and helps minimize errors introduced by manual entry. In conclusion, the DE-HDL library development using Allegro X System Capture course involves several critical steps and supports various symbol creation techniques. This course helps librarians create and modify symbols effortlessly and deepens their understanding of library development within Allegro X System Capture. To learn more about this topic, enroll in the DE-HDL Library Development using Allegro X System Capture course on the Cadence Support portal . Click the training byte link now or visit Cadence Support and search for training bytes under Video Library. If you find the post useful and want to delve deeper into training details, enroll in the following online training course for lab instructions and a downloadable design: DE-HDL Library Development using Allegro X System Capture (Online). You can become Cadence Certified once you complete the course. Cadence Training Services now offers free Digital Badges for all popular online training courses. These badges indicate proficiency in a certain technology or skill and give you a way to validate your expertise to managers and potential employers. You can add the digital badge to your email signature or any social media channels, such as Facebook or LinkedIn, to highlight your expertise. To find out more, see the blog post Take a Cadence Masterclass and Get a Badge . You might also be interested in the training Learning Map that guides you through recommended course flows as well as tool experience and knowledge-level training modules. To find information on how to get an account on the Cadence Learning and Support portal, see here . SUBSCRIBE to the Cadence training newsletter to be updated about upcoming training, webinars, and much more. If you have any questions about courses, schedules, online training, blended/virtual live training, or public, or onsite live training, reach out to us at Cadence Training .

As a verification engineer, you’re surely looking for ways to automate the debugging process. Have you developed your own scripts to ease specific debugging steps that tools don’t offer? Working with scripts locally and manually is challenging—so is reusing and organizing them. What if there was a way to create your own app with the required functionality and register it with the tool? The answer to that question is “Yes!” The Verisium Debug Python App Store lets you instantly add additional features and capabilities to your Verisium Debug Application using Python Apps that interact with Verisium Debug via the Python API. Join me, Principal Education Application Engineer Bhairava Prasad, for this Training Webinar and discover the Verisium Debug Python App Store. The app store allows you to search for existing apps, learn about them, install or uninstall them, and even customize existing apps. Date and Time Wednesday, November 20, 2024 07:00 PST San Jose / 10:00 EST New York / 15:00 GMT London / 16:00 CET Munich / 17:00 IST Jerusalem / 20:30 IST Bangalore / 23:00 CST Beijing REGISTER To register for this webinar, sign in with your Cadence Support account (email ID and password) to log in to the Learning and Support System*. Then select Enroll to register for the session. Once registered, you’ll receive a confirmation email containing all login details. A quick reminder: If you haven’t received a registration confirmation within one hour of registering, please check your spam folder and ensure your pop-up blockers are off and cookies are enabled. For issues with registration or other inquiries, reach out to eur_training_webinars@cadence.com . Like this topic? Take this opportunity and register for the free online course related to this webinar topic: Verisium Debug Training To view our complete training offerings, visit the Cadence Training website Want to share this and other great Cadence learning opportunities with someone else? Tell them to subscribe . Hungry for Training? Choose the Cadence Training Menu that’s right for you. Related Courses Xcelium Simulator Training Course | Cadence Related Blogs Unveiling the Capabilities of Verisium Manager for Optimized Operations - Verification - Cadence Blogs - Cadence Community Verisium SimAI: SoC Verification with Unprecedented Coverage Maximization - Corporate News - Cadence Blogs - Cadence Community Verisium SimAI: Maximizing Coverage, Minimizing Bugs, Unlocking Peak Throughput - Verification - Cadence Blogs - Cadence Community Related Training Bytes Introducing Verisium Debug (Video) (cadence.com) Introduction to UVM Debug of Verisium Debug (Video) (cadence.com) Verisium Debug Customized Apps with Python API Please see course learning maps a visual representation of courses and course relationships. Regional course catalogs may be viewed here . *If you don’t have a Cadence Support account, go to Cadence User Registration and complete the requested information. Or visit Registration Help .

This year, the Cadence Giving Foundation (CGF) launched Fem.AI to achieve a more inclusive tech sector, and the inaugural Fem.AI Summit that took place on October 1 was a luminary in a world where technology is evolving at an unprecedented pace. The summit not only excelled in its mission to enlighten, empower, and mobilize stakeholders across various industries on the issue of gender disparity in high tech and AI, but was a celebration of innovation, diversity, and empowerment. As we reflect on the moments that made the summit unforgettable, it's clear that the event was more than just a meeting of minds—it was a movement for change! Shaping Tomorrow Together Cadence’s president and CEO, Anirudh Devgan, stated, “Women’s talent and perspectives are crucial to shaping the future of AI.” Devgan’s words epitomized the driving force behind the first-ever Fem.AI Summit which brought together innovators, educators, business leadership, and investors across industries to create an ecosystem that ensures women can fully participate in the AI revolution and burgeoning AI economy. The energy of pioneers ready to collectively disrupt the status quo filled the air, and as the day-long summit began, it became clear that we were part of something truly groundbreaking. The event's lineup of speakers held discussions that went beyond the technical aspects of AI, emphasizing the vital importance of diversity in technology. Such insights were lent by leading voices from MIT, Stanford, and UC Berkeley, who set the stage for inspiring discussions with speakers like Dr. Joy Buolamwini, Founder of the Algorithmic Justice League, and Reshma Saujani, Founder and CEO of Moms First and Girls Who Code. Included in this lineup of leading figures was Dr. Chelsea Clinton, Vice Chair of the Clinton Foundation, who left us with her hopes for the future of women in AI: “I’m hoping because of company-wide commitments like what we’re experiencing here today thanks to Cadence, that the people who will be part of designing [future technologies] will have a different group of people around the proverbial table or the computer screens doing that… and that women will be more integral into the conceptualization and then the actualization of AI-driven enterprises.” The hopes and visions for women in AI cannot manifest in a vacuum, they must be achieved with the support of individuals and systems from education all the way to the upper echelons of leadership. It is with this understanding, that Fem.AI is committed to investing in women at every stage of their STEM journey. Breaking Barriers It is with this ideal that we were honored to hear from women breaking through barriers of gender, race, and class in achieving pinnacles of success in areas of science and technology. Dr. Sarah H. Chen, Postdoctoral Researcher at Stanford and Thriving Stars Scholar at MIT, Niki Karanikola, Machine Learning Engineer and Break Through Tech AI Scholar at MIT, and Katya Echazarreta, NASA’s first Mexican Astronaut, showcased the resilience and determination that drive progress within and beyond our industry. Through their stories of persevering despite all odds, we were reminded that supporting students in STEM can create generational change with impacts beyond the realms of AI and technology. The final speaker at the Cadence Fem.AI Summit, the trailblazing Brandi Chastain, Founder of Bay FC, World Cup Champion, and Olympic Gold Medalist, left us with a powerful reminder that when faced with this opportunity: “Our purpose needs to be intentional” especially in building the future of technology and AI where “diversity is not something to be afraid of, but something to be embraced.” Echoing this sentiment, summit attendees left the event reminded of the crucial role we collectively play in ensuring women are part of this tech revolution. Moving Forward While the summit may have concluded, its impact will continue through individuals, companies, and communities aspiring to achieve an equitable tech sector. This is just the start, and we must take collective action now. We hope that you will join Cadence to ensure that we clear the path and catalyze women's role in the AI revolution! Meet Our Partners Our partners are making Fem.AI’s vision a reality through their important work advancing women in technology, including fostering STEM excellence in higher education, launching STEM careers, and achieving gender diversity in leadership. Learn more about the important work of each of our partners by visiting their pages: Break Through Tech Last Mile Education Fund Fast Forward Generation VC Include Global Semiconductor Alliance Join the Fem.AI Alliance Joining the Fem.AI Alliance signals that your company or institution is committed to evolving the AI workforce. By increasing the representation of women in AI, we aim to broaden the talent pool and the perspective so that AI represents us all. Through the Fem.AI Alliance, companies and institutions can share best practices, guidance, and inspiration. Since its launch, companies like the Equinix Foundation, NetApp, NVIDIA, Unity Technologies, and Workday have joined the Alliance in their commitment to Fem.AI’s work and mission. Visit Fem.AI to get involved today or contact Fem.AI@cadence.com .

In this edition of the Women in CFD series, we feature Vassiliki Moschou, aka Vicky, senior supervisor at BETA CAE, now part of Cadence. Her career journey serves as an inspiration for anyone who believes that studying in one field and working in another is less desirable. Vicky demonstrates how knowledge gained in one discipline can be effectively applied in another, often providing fresh and intriguing insights. Join us in this conversation to learn more about Vicky, her career path, and her advice for those considering a career in a field different from their studies. Tell us something about yourself. I've lived all my 41 years in the vibrant city of Thessaloniki, Greece. I’m married to my high school sweetheart, and together we're raising two incredible daughters who are 11 and almost 8 years old. These girls are absolutely the center of my world, and every day with them feels like a gift. My entire life, including where I have built my career and family, is deeply rooted in Thessaloniki. It's not just where I am from; it's a big part of who I am. Could you share your educational background and how you first became interested in computational fluid dynamics (CFD)? In 2001, I started my academic journey at the Computer Science Department of Aristotle University of Thessaloniki , where I focused on studying signal processing and artificial intelligence. This field fascinated me, and I pursued a master’s degree in the same area to further my expertise. Concurrently, I was involved in European research programs on signal/audio processing and machine learning methodologies. It became evident early on that my career would revolve around software engineering, a path I was fully prepared to pursue. However, everything took a turn when I joined BETA CAE in 2008. It was there that I was introduced to the field of CFD, which was completely unfamiliar to me at the time. This presented a new challenge that I eagerly accepted. I received support from all my colleagues, but I was primarily mentored by two brilliant and dedicated engineers, Michael Giannakidis and Vangelis Skaperdas , who introduced me to the world of CFD. Over time, what was once an unknown territory for me has become my passion. My journey through CFD has been a significant part of my professional growth. In my 30s, I pursued and completed a PhD in systems physiology in collaboration with the Medical and Computer Science Departments of Aristotle University of Thessaloniki. Our research focused on examining the EGF-activated MAPK pathway (often associated with cancer) from the perspective of complex self-organizing systems. Using graph theory, signal processing, and machine learning, we extracted information from the signals observed in this dynamic, distributed biological system to target novel drug development. What are the different positions you have held within the company, and what responsibilities do you currently hold? I started my career as a junior engineer at BETA CAE (now Cadence). It was a role that plunged me deep into the fascinating worlds of software and CFD, a crucial time of my career filled with learning and growth. My hard work and dedication didn't go unnoticed, and after a few years, I was promoted. That promotion was the first step on a career ladder that I've been ascending ever since. Now, I'm in the position of a senior supervisor. Though my job now involves a wide range of managerial tasks, I'm still deeply passionate about the technical side of things. I love writing code and working through the complexities of our projects, merging my leadership responsibilities with my enthusiasm for the technical facets of our work. What would you be doing if not working in CFD? Had my career taken a different trajectory, I envision myself in a role deeply embedded in human connections—perhaps as the owner of a quaint bakery or a cozy hotel, a teacher, or even venturing into human resources. There's a certain allure in careers that foster direct engagement with people, creating experiences and memories. In fact, I have an inherent desire to connect and communicate with people, aspects that are fundamentally different yet equally fulfilling as my current career. What are some of your favorite pastimes and hobbies? Family is at the center of my leisure time. We love taking short trips to the village, hanging out with our friends, and connecting. Our activities range from solving puzzles in escape rooms to passionately cheering at basketball games, especially since my older daughter has taken up the sport. But beyond these activities, being a mother is my most cherished pastime. The moments I share with my daughters, the lessons we learn together, and the joy we find in everyday adventures are what I hold dear. What are your thoughts on women in technical fields? The landscape for women in technical fields is gradually transforming, a change I observe with optimism and hope. In Greece, the increasing presence of women in engineering is a positive sign. In Cadence specifically, the representation of women is high compared to other tech companies. As a mother to two daughters, I am acutely aware of the importance of being a role model to them. It's crucial to demonstrate that aspirations should not be limited by gender and that the technical field is as much a place for women as it is for men. Encouraging this mindset is vital for the progress of our society and for the empowerment of the next generation of women in technology. Advice from Vicky for those considering a career in a field different from their studies: Learning is a lifelong journey. Embrace every challenge as an opportunity to grow and learn something new. Stay curious and adaptable to navigate the ever-evolving landscape of technology. Being labeled an 'expert' is less important than the willingness to learn and adapt. Finding happiness in your work can lead to natural success. In the epoch of artificial intelligence, train the most powerful neural network: your brain. At Cadence, our commitment is towards establishing an inclusive workspace where women feel empowered to achieve their professional best. Anchored by our One Cadence—One Team ethos, we take pride in fostering a community where our driven, devoted, and skilled women employees excel, making exceptional contributions to our customers, communities, and one another. Are you just like Vicky, venturing beyond your academic background, and considering a career in a different domain while being surrounded by an encouraging and uplifting atmosphere? Then, you won't want to miss exploring career opportunities at Cadence—celebrated as 'A Great Place for Women to Work'! Click the button below to discover your next adventure! Learn more about Cadence Fem.AI Alliance, which aims to lead the gender equity revolution in the AI workforce.

Hearing is one of the most essential senses for engaging with the world. It enables us to converse, appreciate music, and remain alert to our surroundings. Hearing loss is a prevalent issue affecting millions of individuals globally and disconnecting them from a world where sound is vital to others and the environment. The World Health Organization (WHO) reports that over 5% of the global population requires hearing rehabilitation, a striking statistic highlighting this issue's pervasive nature. Technology has transformed audiology, evolving from simple ear trumpets to sophisticated modern hearing aids. This advancement began with the invention of the transistor, paving the way for devices that are fully wearable inside or behind the ear. Although hearing aids have been available for many years, historically, access to these critical devices has been insufficient, resulting in numerous individuals lacking the necessary support. However, recent advances in hearing aid technology promise improved acoustic experiences, employing modern techniques like binaural processing and neural networks. These innovations demand sophisticated architecture to balance high memory needs with low power consumption in a user-friendly design. Cadence is at the forefront of this technological evolution, offering tools and IP solutions that enhance the accessibility, efficiency, and impact of hearing aids, paving the way for a more inclusive future. This blog explores how Cadence's advanced DSPs are transforming hearing aid design and making them more accessible, efficient, and impactful. Hearing Aids: A Testament to Human Ingenuity The transition from analo g to digital technology in the late 20th century further transformed hearing aids, offering superior sound quality, customization, and the ability to connect to various electronic devices, thus enhancing the user experience markedly. Today's hearing aids are highly effective, versatile, and nearly invisible, a significant advancement from early attempts to address hearing loss. They also feature advanced noise cancellation and connectivity options, allowing users to integrate seamlessly into the digital world. This progression not only highlights the industry's commitment to improving user experience and accessibility but also offers a glimpse into a future where hearing loss is no longer a barrier. Challenges Despite advancements and sophistication, there are several challenges related to hearing aid design and adoption. Users demand smaller, more discreet devices that don't sacrifice performance. While the shift towards sleeker designs is aesthetically pleasing, it introduces substantial complexities in product design. Designers face the challenges of integrating essential components, such as batteries and peripherals, into increasingly compact spaces. Power consumption remains a critical concern, as these devices must remain operational throughout the day. Leveraging neural networks to enhance the signal-to-noise ratio (SNR) for better quality demands additional memory capacity. Consequently, there is a pressing need for flexible, low-power architectures that incorporate all necessary memory and peripherals without compromising the device’s compact size. Adopting AI for adjusting hearing aid volume to fit an individual's specific auditory requirements is a significant challenge and demands more memory and effort. Besides this, reliability and cost are significant challenges for manufacturers. Cadence's Role in Transforming Hearing Aids In hearing aid development, the capacity to evaluate the energy efficiency of SoCs across different frequencies in real time is crucial. These applications demand cohesive, energy-efficient solutions that can uphold high performance. The Cadence Tensilica HiFi and Fusion F1 DSP family emphasize minimal power usage while providing robust performance, ideally suited for a wide range of audio and voice applications. The Cadence Tensilica HiFi DSP family, a high-performance audio technology with AI acceleration and advanced DSP capability, offers feature-rich audio, speech, and imaging for wearables, automotive, home entertainment, digital assistants, and ASR. The Tensilica HiFi DSP family accelerates innovation with its comprehensive instruction set and supports fixed- and floating-point data types. Simplifying software development, it offers C/C++ programming, an auto-vectorizing compiler, and a rich DSP software library through the Cadence Tensilica Xplorer development environment. With the flexibility to customize and enhance performance through additional instructions and better I/O bandwidth, the Tensilica HiFi and Fusion DSP families offer a robust, low-energy audio solution compatible across an expansive software ecosystem for various applications and devices. Conclusion Technological advancements are driving hearing aid evolution; the future of hearing aids lies in further miniaturization and functionality enhancement. Cadence's ongoing innovations aim to improve signal processing and noise reduction, even in challenging environments. The integration of neural networks promises more apparent sound transmission and greater adaptability. Cadence is working on improving how these devices process signals and reduce noise and has initiated a collaborative venture with distinguished entities like GlobalFoundries (GF), Hoerzentrum Oldenburg gGmbH, and Leibniz University Hannover. This collaboration has borne fruit in the form of the industry's first binaural hearing aid system-on-chip (SoC) prototype, the Smart Hearing Aid Processor ( SmartHeAP ). Learn More Cadence, GlobalFoundries, Hoerzentrum Oldenburg and Leibniz University Hannover Collaborate to Advance Hearing Aid Technology Cadence Extends Battery Life and Improves User Experience for Next-Generation Hearables, Wearables and Always-On Devices Advancing the Future of Hearing Aids with Cadence Bluetooth LE Audio, Hearing Aids, and Mindtree

Celebrated for their unparalleled engineering expertise and pioneering mindset, McLaren stands at the forefront of innovation. Theirs is a story of engineering excellence, a symphony of speed driven by the relentless pursuit of aerodynamic perfection. In 2022, Cadence was named an Official Technology Partner of the McLaren Formula 1 Team. The multi-year partnership between McLaren and Cadence has helped redefine the boundaries of what’s possible in Formula 1 aerodynamics. Shaving off a fraction of a second per lap can make all the difference in a podium finish, and track conditions bring layers of complexity to the design process. That’s where Cadence steps in with Fidelity CFD Software. The Cadence Fidelity CFD software is a comprehensive suite of computational fluid dynamics (CFD) solutions. Access to this solution allows the McLaren F1 team to accelerate their CFD workflow, enabling them to assess designs faster and more precisely. It also allows them to investigate airflows and tackle design projects that require advanced compute power and precision. With Fidelity Flow’s solver capabilities and Python-driven automation, Cadence’s CFD software aids the advancement of aerodynamic simulations that go into McLaren’s F1 cars. With a customized, high-quality, multi-block meshing strategy and optimized workflow, Fidelity CFD makes design exploration more automated, thereby helping establish a strong foundation for McLaren’s future success on the track. Lando Norris, F1 driver for McLaren, said, “As a driver, I saw the impact of every decision made in the design room in every simulation run. The work on aerodynamics directly translates to the confidence I have on track, the grip in every turn, and the speed on every straight. This partnership, this technology, is what will give us the edge. It's not just about battling opponents; it's about mastering the airflow around the car in every driving condition on every track.” If you’re interested in learning more about the importance of CFD in McLaren’s racing success, be sure to attend our upcoming webinar, “CFD and Experimental Aerodynamics in McLaren F1 Engineering.” Christian Schramm, McLaren’s director of advanced projects, and Cadence’s Benjamin Leroy will be the main speakers for the event. Register today to secure your spot! For more insights on the Formula 1 car design process, take a look at the case study, “ McLaren Formula 1 Car Aerodynamics Simulation with Cadence Fidelity CFD Software .” Learn more about how McLaren and Cadence are engineering success . “Designed with Cadence” is a series of videos that showcases creative products and technologies that are accelerating industry innovation using Cadence tools and solutions. For more Designed with Cadence videos, check out the Cadence website and YouTube channel .

An increasing number of embedded designs are multi-core systems. At the pre-silicon stage, customers use a simulation platform for architectural exploration and software development. Architects want to quantify the impact of the number of cores, local memory size, system memory latency, and interconnect bandwidth. Software teams wish to have a practical development platform that is not excruciatingly slow. This blog shares a recipe for simulating Cadence DSPs in a multi-core design as separate x86 processes. The purpose is to reduce simulation time for customers with simple multi-core models where cores interact only through shared memory. It uses a Vision Q8 multi-core design to share details of the XTSC (Xtensa SystemC) model, software application, commands, and debugging. Note the details shared are for a simulation run on an Ubuntu Linux machine, Xtensa tools version RI-2023.11, and core configuration XRC_Vision_Q8_AODP. Complex vs. Simple Model A complex model (Figure 1) is one in which one core accesses another core's local memory, or there are inter-core interrupts. Simulation runs as a single x86 process. Figure 1 A simple model (Figure 2) is one in which cores interact only through shared memory. Shared memory is a file on the Linux host. Figure 2 Multiple x86 Process – Simple Model As depicted in Figure 3, each core is simulated using a separate x86 process. Cores use barriers and locks placed in shared memory for synchronization and data sharing. Locks are placed in un-cached memory that support exclusive subordinate access. The XTSC memory component, xtsc_memory , supports exclusive subordinate access. Cadence software tools provide a way to define memory regions as cached or uncached. For more details, please refer to Cadence's Linker Support Packages (LSP) Reference Manual for Xtensa SDK . Figure 3 Demo Application A demo application performs a 128x128 matrix multiplication. Work is divided so that each of the 32 cores computes four rows of the 128x128 result matrix. Cores use barriers to synchronize. Cadence tools provide APIs for synchronization and locking. Please refer to Cadence's System Software Reference Manual for more details. Note without a higher-level lock, prints from all cores will get mixed up. Therefore, in the demo application, only core#0 prints. SystemC Simulation The following sample command runs the 32-core simulation in such a way that each core is a separate x86 process. It runs a matrix multiplication application in cycle-accurate mode with logging off. >>for (( N=0; N >xtsc-run -define=NumCores=32 -define=N=0 -define=LOGGING=0 -define=TURBO=0 --xxdebug=sync -i=coreNN.inc -sc_main=sc_main.cpp -no_sim Modify the sc_main.cpp generated for core#0 to create a generic sc_main.cpp to build a single simulation executable for all cores. The Xtensa SDK includes Makefile targets to build custom simulations. By default, the simulation runs in cycle-accurate mode. Fast functional (Turbo) mode provides additional improvement over cycle-accurate mode. Note that the fast functional mode has an initialization phase, so gains are visible only when running an application with longer run times. Simulation Wall Time The table captures simulation wall time improvements. Note that these are illustrative wall time numbers. Actual wall time numbers and improvements will depend on your host machine's performance and your application. Simulation Type Wall Time Comments Single process cycle accurate mode 17500 seconds Multiple x86 processes cycle accurate mode 1385 seconds 12X faster than single process Multiple x86 processes turbo mode 415 seconds 3X faster than cycle accurate mode Debugging Attaching a debugger to each of the individual x86 core simulation processes is possible. Synchronous stop/resume and core-specific breakpoints are also supported. Configure the Xplorer launch configuration and attach it to the running simulation processes as follows (Figure 5) Figure 5 Figure 6 shows 32 debug contexts. Figure 6 As shown, using Xtensa SDK, you can create a multi-core simulation that functions as a practical software development platform. Please visit the Cadence support site for information on building and simulating multi-core Xtensa systems.

On November 5, 2024, the Cadence Bangalore Toastmasters Club celebrated a significant milestone by hosting its 50th meeting. Established in December 2020, the club was created to provide a supportive environment for individuals looking to improve their communication and leadership skills. Over the years, the club has evolved into a vibrant community filled with success stories of personal development and newfound confidence. A testament to the club's dedication is its achievement of the "Select Distinguished Club" status during the 2023-2024 program year. By fulfilling 7 out of 10 distinguished goals, the club highlighted its commitment to excellence—a success driven by its vibrant members' relentless focus and perseverance. The strategic insight gained from regular Toastmasters committee meetings and the influential "Moments of Truth" sessions held in 2023 and 2024 are key to this success. Our club members have consistently demonstrated strong performance in various speech contests, with notable achievements across multiple levels. In 2023, members excelled in Evaluation and Table Topics contests, reaching the district level while advancing to the Division Level in the International Speech Contest. Continuing their success into 2024, members again qualified for area-level contests, securing third-place positions in the Evaluation and Table Topics categories, highlighting the club's dedication and competitive spirit. The 50th meeting was based on the theme of serendipity. It was not only a milestone celebration but also a vibrant festival of achievements and growth. The day buzzed with energy as activities like a spirited Treasure Hunt injected enthusiasm and camaraderie among attendees. Distinguished guests, including Kripa Venkitachalam and Madhavi Rao, enriched the occasion with inspiring speeches. Madhavi reignited the club's spirit, while Kripa's discourse on the Growth Mindset and the "Power of Yet" encouraged members to pursue continuous self-improvement. The Cadence Bangalore Toastmasters Club is enthusiastic about its promising future and is committed to creating an environment that promotes personal and professional growth. Many members are close to completing their Toastmasters levels and pathways, and this term, a new group of approximately 30 individuals has joined, bringing the total membership to 52. This vibrant community is just beginning its journey and is eager to reach new milestones together through mutual support and a shared commitment to excellence. The transformations experienced by many club members are truly compelling. They often share how the club has significantly improved their communication skills and boosted their confidence. One member recalls, "Before joining, I found public speaking intimidating. Now, I embrace every opportunity to share my ideas." Another member highlights how the club's supportive environment helped him overcome his fear of public speaking, propelling his career to new heights. This culture of constructive feedback and continuous improvement has inspired countless members to pursue their dreams with renewed determination and optimism. The Cadence Bangalore Toastmasters Club's journey is a living testament to the power of community and the potential within each of us to grow and achieve greatness. As the club continues to evolve and inspire, it serves as a beacon for those aspiring to transform their skills and seize their moment in the spotlight. Learn more about life at Cadence.

Each November, we are reminded of the bravery and dedication of those who have served our country. At Cadence, we thank our Veteran employees for their patriotism by reaffirming our commitment to honoring their sacrifices and recognizing their contributions to our business success. Our diverse and inclusive culture is strengthened by the unique perspective of our Veteran employees, and we are proud to support the Veterans Inclusion Group as a space for community members and their allies to connect. In celebration of Veterans Day, we were excited to catch up with Johnathan Edmonds, Veterans Inclusion Group Lead and Design Engineering Director, for a heartfelt chat on his journey through military service to leadership within Cadence. Throughout the conversation, he shared the importance of creating space for Veterans, the skills they offer, and his aspirations for what the Veterans Inclusion Group will achieve in the years ahead. Oh yeah, and he flies planes, too! Join us as we dive into what makes this holiday special for so many across the nation and how we can respectfully commemorate it together. Johnathan, you’re a retired Air Force Reservist, pilot, and now a Design Engineering Director. Can you tell us about your journey from the military to your current role at Cadence? I started my military and electronics journey in the Navy. I enlisted at 18 and served for six years as an aviation electronics technician. During this time, I was able to learn about and repair electronics on planes. This set me up for success, and when I was honorably discharged, I attended Virginia Tech to study computer engineering. Once I graduated, I continued my career as an engineer, but I still wanted to be a military pilot. From my past experience, I knew the reserves were an option where I could learn to fly and still have a civilian career. Not only was I lucky enough to get selected to go to pilot training, but after I returned from flight school, my luck grew, and I was hired at Cadence. Cadence has supported me throughout my military career, which has been a great benefit, as many companies don’t support reservists. The best thing about serving and being employed at Cadence is how I could blend my skill sets to further the Air Force’s mission and achieve great things in engineering. As the first lead of Cadence’s Veterans Inclusion Group, you played an integral part in growing our culture and building community at the company since launching the group four years ago. What inspired you to take on the role of Inclusion Group Lead? I was inspired by three things: camaraderie, service, and outreach. I wanted to see if we could achieve a similar sense of community through the Veterans Inclusion Group as we had during our service life. I also wanted to see how we could better serve our Veterans here at Cadence. I wanted to explore any benefits that could be expanded, roles that could be developed by Vets, and, lastly, I wanted to serve a broader community. COVID-19 put a damper on some of the community support, but we are getting back on track with Veteran employment programs and volunteer efforts like Carry the Load and Gold Star Families. Why is it important to have this space dedicated to Veteran employees? There are many reasons! Networking, for one, creates a stronger, more unified Cadence culture. Two, Vets face a variety of issues not generally understood by those who have not served, such as PTSD, where to get help for disabilities, how to get an old medical record, etc. As I mentioned, I’m also passionate about connecting Veterans with employment and job opportunities. It is so nice to work for a company that actively recruits Vets. We have our own “language,” if you will, so it’s nice to have a space to talk in the language that we are familiar with. What have been some of your favorite moments leading this group over the past few years? Are there any “wins” that you would like to recognize? We have a lot of wins. Events held during COVID-19 and getting past COVID-19, donating to worthwhile causes, and hosting guest speakers are all fantastic milestones and accomplishments. That said, the biggest win is the hiring of new Veteran employees. Mark Murphy, Corporate VP of Sales Operations, and I have both welcomed Vets to our team during this time, and it is such a joy to watch what someone can do when given the opportunity to succeed in the right environment. As you are set to transition out of the lead role next year, what do you hope to see the Veterans Inclusion Group accomplish next? My hope is that the Veterans Inclusion Group partners with other companies, expanding our reach externally and exploring new opportunities to engage Veterans outside of Cadence. Johnathan (left) speaks on an inclusion group panel, along with David Sallard (center), lead of Cadence's Black Inclusion Group and Sr. Principal Application Engineer; Christina Jamerson (on screen), lead of Cadence's Abilities Inclusion Group and Demand Generation Director; and Dianne Rambke (right), lead of Cadence's Latinx Inclusion Group and Marketing Communications Director. What are the important ways that people can signal inclusion and respectfully honor Veterans at work? What are the most meaningful or impactful actions employees everywhere can take to support Veteran coworkers? I think there is one answer to both questions. I recommend that people engage with their companies’ employee resource groups (ERGs) and have conversations with them. Opening up the lines of communication will lead to new paths in their journeys. What are you looking forward to in 2025, both personally and professionally? In 2025, professionally, I am looking forward to taking mixed-signal systems and verification to another level by including emulation, automatic model generation, and seeing which boundaries we can push in our SerDes and Chiplets products. Personally, I am looking forward to making my SXS street legal so I can drive places without getting a ticket, seeing my children participate in sports, church, and school, and taking my wife on vacation to Europe or somewhere else we can unplug. Learn more about Cadence’s Inclusion Groups, diverse culture, and commitment to belonging.

Peripheral Component Interconnect Express (PCIe) is a high-speed interface standard widely used for connecting processors, memory, and peripherals. With the increasing reliance on PCIe to handle sensitive data and critical high-speed data transfer, ensuring data integrity and encryption during verification is the most essential goal. As we know, in the field of verification, randomization is a key technique that drives robust PCIe verification. It introduces unpredictability to simulate real-world conditions and uncover hidden bugs from the design. This blog examines the significance of randomization in PCIe IDE verification, focusing on how it ensures data integrity and encryption reliability, while also highlighting the unique challenges it presents. For more relevant details and understanding on PCIe IDE you can refer to Introducing PCIe's Integrity and Data Encryption Feature . The Importance of Data Integrity and Data Encryption in PCIe Devices Data Integrity : Ensures that the transmitted data arrives unchanged from source to destination. Even minor corruption in data packets can compromise system reliability, making integrity a critical aspect of PCIe verification. Data Encryption : Protects sensitive data from unauthorized access during transmission. Encryption in PCIe follows a standard to secure information while operating at high speeds. Maintaining both data integrity and data encryption at PCIe’s high-speed data transfer rate of 64GT/s in PCIe 6.0 and 128GT/s in PCIe 7.0 is essential for all end point devices. However, validating these mechanisms requires comprehensive testing and verification methodologies, which is where randomization plays a very crucial role. You can refer to Why IDE Security Technology for PCIe and CXL? for more details on this. Randomization in PCIe Verification Randomization refers to the generation of test scenarios with unpredictable inputs and conditions to expose corner cases. In PCIe verification, this technique helps us to ensure that all possible behaviors are tested, including rare or unexpected situations that could cause data corruption or encryption failures that may cause serious hindrances later. So, for PCIe IDE verification, we are considering the randomization that helps us verify behavior more efficiently. Randomization for Data Integrity Verification Here are some approaches of randomized verifications that mimic real-world traffic conditions, uncovering subtle integrity issues that might not surface in normal verification methods. 1. Randomized Packet Injection: This technique randomized data packets and injected into the communication stream between devices. Here we Inject random, malformed, or out-of-sequence packets into the PCIe link and mix valid and invalid IDE-encrypted packets to check the system’s ability to detect and reject unauthorized or invalid packets. Checking if encryption/decryption occurs correctly across packets. On verifying, we check if the system logs proper errors or alerts when encountering invalid packets. It ensures coverage of different data paths and robust protocol check. This technique helps assess the resilience of the IDE feature in PCIe in below terms: (i) Data corruption: Detecting if the system can maintain data integrity. (ii) Encryption failures: Testing the robustness of the encryption under random data injection. (iii) Packet ordering errors: Ensuring reordering does not affect data delivery. 2. Random Errors and Fault Injection: It involves simulating random bit flips, PCRC errors, or protocol violations to help validate the robustness of error detection and correction mechanisms of PCIe. These techniques help assess how well the PCIe IDE implementation: (i) Detects and responds to unexpected errors. (ii) Maintains secure communication under stress. (iii) Follows the PCIe error recovery and reporting mechanisms (AER – Advanced Error Reporting). (iv) Ensures encryption and decryption states stay synchronized across endpoints. 3. Traffic Pattern Randomization: Randomizing the sequence, size, and timing of data packets helps test how the device maintains data integrity under heavy, unpredictable traffic loads. Randomization for Data Encryption Verification Encryption adds complexity to verification, as encrypted data streams are not readable for traditional checks. Randomization becomes essential to test how encryption behaves under different scenarios. Randomization in data encryption verification ensures that vulnerabilities, such as key reuse or predictable patterns, are identified and mitigated. 1. Random Encryption Keys and Payloads: Randomly varying keys and payloads help validate the correctness of encryption without hardcoding assumptions. This ensures that encryption logic behaves correctly across all possible inputs. 2. Randomized Initialization Vectors (IVs): Many encryption protocols require a unique IV for each transaction. Randomized IVs ensure that encryption does not repeat patterns. To understand the IDE Key management flow, we can follow the below diagram that illustrates a detailed example key programming flow using the IDE_KM protocol. Figure 1: IDE_KM Example As Figure 1 shows, the functionality of the IDE_KM protocol involves Start of IDE_KM Session, Device Capability Discovery, Key Request from the Host, Key Programming to PCIe Device, and Key Acknowledgment. First, the Host starts the IDE_KM session by detecting the presence of the PCIe devices; if the device supports the IDE protocol, the system continues with the key programming process. Then a query occurs to discover the device’s encryption capabilities; it ensures whether the device supports dynamic key updates or static keys. Then the host sends a request to the Key Management Entity to obtain a key suitable for the devices. Once the key is obtained, the host programs the key into the IDE Controller on the PCIe endpoint. Both the host and the device now share the same key to encrypt and authenticate traffic. The device acknowledges that it has received and successfully installed the encryption key and the acknowledgment message is sent back to the host. Once both the host and the PCIe endpoint are configured with the key, a secure communication channel is established. From this point, all data transmitted over the PCIe link is encrypted to maintain confidentiality and integrity. IDE_KM plays a crucial role in distributing keys in a secure manner and maintaining encryption and integrity for PCIe transactions. This key programming flow ensures that a secure communication channel is established between the host and the PCIe device. Hence, the Randomized key approach ensures that the encryption does not repeat patterns. 3. Randomization PHE: Partial Header Encryption (PHE) is an additional mechanism added to Integrity and Data Encryption (IDE) in PCIe 6.0. PHE validation using a variety of traffic; incorporating randomization in APIs provided for validating PHE feature can add more robust Encryption to the data. Partial Header Encryption in Integrity and Data Encryption for PCIe has more detailed information on this. Figure 2: High-Level Flow for Partial Header Encryption 4. Randomization on IDE Address Association Register values: IDE Address Association Register 1/2/3 are supposed to be configured considering the memory address range of IDE partner ports. The fields of IDE address registers are split multiple values such as Memory Base Lower, Memory Limit Lower, Memory Base Upper, and Memory Limit Upper. IDE implementation can have multiple register blocks considering addresses with 32 or 64, different registers sizes, 0-255 selective streams, 0-15 address blocks, etc. This Randomization verification can help verify all the corner cases. Please refer to Figure 2. Figure 3: IDE Address Association Register 5. Random Faults During Encryption: Injecting random faults (e.g., dropped packets or timing mismatches) ensures the system can handle disruptions and prevent data leakage. Challenges of IDE Randomization and its Solution Randomization introduces a vast number of scenarios, making it computationally intensive to simulate every possibility. Constrained randomization limits random inputs to valid ranges while still covering edge cases. Again, using coverage-driven verification to ensure critical scenarios are tested without excessive redundancy. Verifying encrypted data with random inputs increases complexity. Encryption masks data, making it hard to verify outputs without compromising security. Here we can implement various IDE checks on the IDE callback to analyze encrypted traffic without decrypting it. Randomization can trigger unexpected failures, which are often difficult to reproduce. By using seed-based randomization, a specific seed generates a repeatable random sequence. This helps in reproducing and analyzing the behavior more precisely. Conclusion Randomization is a powerful technique in PCIe verification, ensuring robust validation of both data integrity and data encryption. It helps us to uncover subtle bugs and edge cases that a non-randomized testing might miss. In Cadence PCIe VIP, we support full-fledged IDE Verification with rigorous randomized verification that ensures data integrity. Robust and reliable encryption mechanisms ensure secure and efficient data communication. However, randomization also brings various challenges, and to overcome them we adopt a combination of constrained randomization, seed-based testing, and coverage-driven verification. As PCIe continues to evolve with higher speeds and focuses on high security demands, our Cadence PCIe VIP ensures it is in line with industry demand and verify high-performance systems that safeguard data in real-world environments with excellence. For more information, you can refer to Verification of Integrity and Data Encryption(IDE) for PCIe Devices and Industry's First Adopted VIP for PCIe 7.0 . More Information: For more info on how Cadence PCIe Verification IP and TripleCheck VIP enables users to confidently verify IDE, see our VIP for PCI Express , VIP for Compute Express Link for and TripleCheck for PCI Express For more information on PCIe in general, and on the various PCI standards, see the PCI-SIG website .

Hello~

As the following circuit shows, VCC+5V_USB is the 4^th power source, connecting the output of power management of diode.There are 3 5V input in the input port of LTC4417.

It’s normal when VCC+5V_USB prodive power with other circuit. However, if I cup VCC+5V_FIRST,VCC+5V_SECOND,VCC+5V_THIRD, 5V voltage will occurred in the VCC+5V_FIRST,VCC+5V_SECOND,VCC+5V_THIRD.

The LTC4417 PDF

Is this phenomance normal ?

Please kindly give me some advice ! Thanks.

Hello,

I'm using OrCad 17.2 and in the company I'm wokring at there was a change in the database folder (from driver F to G for example) and it effects the option of synchronise using the Part Manager. and changing manually each part in the Desgin Cahce can be a pain.

Is there any way I can make a TCL script that will run and replace a part cahce with other? Better if I can call from a table to read, and write from other collum.

I would really be happy for an example.

Thanks for the help.