From a behavioral perspective, therapeutic inertia can happen when obstacles to changing a diabetes treatment plan outweigh perceived benefits. There is a complex interaction of important treatment-related obstacles for people with diabetes (PWD), their treating health care professional (HCP), and the clinical setting in which they interact. Tipping the scales toward more effective action involve strategies that increase perceptions of the benefits of treatment intensification while addressing important obstacles so that treatment changes are seen by both PWD and HCPs as worthwhile and achievable.

Despite significant advances in therapies for pediatric type 1 diabetes, achievement of glycemic targets remains elusive, and management remains burdensome for patients and their families. This article identifies common challenges in diabetes management at the patient-provider and health care system levels and proposes practical approaches to overcoming therapeutic inertia to enhance health outcomes for youth with type 1 diabetes.

Many people with diabetes do not achieve individualized treatment targets. Therapeutic inertia, the underuse of effective therapies in preventing serious clinical end points, is a frequent, important contributor to this failure. Clinicians, patients, health systems, payors, and producers of medications, devices, and other products for those with diabetes all play a role in the development of therapeutic inertia and can all help to reduce it.

Background and objectives

The effects of active case finding (ACF) models that mobilise community networks for early identification and treatment of tuberculosis (TB) remain unknown. We investigated and compared the effect of community-based ACF using a seed-and-recruit model with one-off roving ACF and passive case finding (PCF) on the time to treatment initiation and identification of bacteriologically confirmed TB.

Background

The increasing incidence of life-threatening Pneumocystis pneumonia (PCP) in non-HIV immunocompromised patients is a global concern. Yet, no reports have examined the prognostic significance of pre-existing interstitial lung disease (ILD) in non-HIV PCP.

Chronic cough is a common complaint in the general population but there are no precise data on the incidence of, and prospectively examined risk factors for chronic cough in a population-based setting. Therefore, we investigated the period prevalence, incidence and risk factors for chronic cough in adult subjects.

In a prospective population-based cohort study among subjects aged ≥45 years, data on chronic cough were collected on two separate occasions using a standardised questionnaire. Chronic cough was defined as daily coughing for at least 3 months duration during the preceding 2 years. Potential risk factors were gathered by interview, physical examination and several investigations.

Of the 9824 participants in this study, 1073 (10.9%) subjects had chronic cough at baseline. The prevalence of chronic cough increased with age and peaked in the eighth decade. In subjects aged <70 years, chronic cough was more common in women. During an average follow-up of 6 years, 439 incident cases of chronic cough occurred with an overall incidence rate of 11.6 per 1000 person-years (95% CI 10.6–12.8). In current smokers, the incidence of chronic cough was higher in men. In the multivariable analysis, current smoking, gastro-oesophageal reflux disease (GORD), asthma and COPD were identified as risk factors for chronic cough.

Chronic cough is common among adults and highly prevalent in the older population. Current smoking, GORD, asthma and COPD are independent risk factors for chronic cough. Individuals at risk of developing chronic cough may benefit from smoking cessation and control of the underlying disease.

Objective

We aimed to assess adherence to the Australian national guideline (COPD-X) against audited practice, and to document the outcomes of patients hospitalised with an acute exacerbation of chronic obstructive pulmonary disease (COPD) at discharge and 28 days after.

Inhaled corticosteroid/long-acting β₂-agonist combination therapy is a recommended treatment option for patients with chronic obstructive pulmonary disease (COPD) and increased exacerbation risk, particularly those with elevated blood eosinophil levels. SOPHOS (NCT02727660) evaluated the efficacy and safety of two doses of budesonide/formoterol fumarate dihydrate metered dose inhaler (BFF MDI) versus formoterol fumarate dihydrate (FF) MDI, each delivered using co-suspension delivery technology, in patients with moderate-to-very severe COPD and a history of exacerbations.

In this phase 3, randomised, double-blind, parallel-group, 12–52-week, variable length study, patients received twice-daily BFF MDI 320/10 µg or 160/10 µg, or FF MDI 10 µg. The primary endpoint was change from baseline in morning pre-dose trough forced expiratory volume in 1 s (FEV₁) at week 12. Secondary and other endpoints included assessments of moderate/severe COPD exacerbations and safety.

The primary analysis (modified intent-to-treat) population included 1843 patients (BFF MDI 320/10 µg, n=619; BFF MDI 160/10 µg, n=617; and FF MDI, n=607). BFF MDI 320/10 µg and 160/10 µg improved morning pre-dose trough FEV₁ at week 12 versus FF MDI (least squares mean differences 34 mL [p=0.0081] and 32 mL [p=0.0134], respectively), increased time to first exacerbation (hazard ratios 0.827 [p=0.0441] and 0.803 [p=0.0198], respectively) and reduced exacerbation rate (rate ratios 0.67 [p=0.0001] and 0.71 [p=0.0010], respectively). Lung function and exacerbation benefits were driven by patients with blood eosinophil counts ≥150 cells·mm^–3. The incidence of adverse events was similar, and pneumonia rates were low (≤2.4%) across treatments.

SOPHOS demonstrated the efficacy and tolerability of BFF MDI 320/10 µg and 160/10 µg in patients with moderate-to-very severe COPD at increased risk of exacerbations.

Background

COPD patients account for a large proportion of lung transplants; lung transplantation survival benefit for COPD patients is not well established.

Introduction

Immunotherapy has become the standard of care in advanced non-small cell lung cancer (NSCLC). We aimed to quantify the economic impact, in France, of anti-PD-1 therapy for NSCLC.

Background

We aimed to investigate the epidemiological and clinical features, and medical care-seeking process of patients with the 2019 coronavirus disease (COVID-19) in Wuhan, China, to provide useful information to contain COVID-19 in other places with similar outbreaks of the virus.

Electronic cigarettes (e-cigarettes) have been used in many countries for >10 years and in this time, there has been a division of opinions amongst both the general public and health professionals regarding the benefit or harms of e-cigarettes. Prior to the reporting of a new phenomenon known as vaping-associated pulmonary injury (VAPI), public opinion about the relative harm of e-cigarettes were increasing but they were perceived as less harmful than cigarettes by one third of people [1]. The recent cases of severe illness and death attributable to VAPI were first described in September 2019 [2]. VAPI appears to be related to either the addition of cannabis/cannabis derivates or vitamin E acetate [3], and as such has not caused radical swing away from the use of e-cigarettes without cannabis or cannabis derivates.

ABSTRACT

Interspecific hybridization can drive evolutionary adaptation to novel environments. The Saccharomycotina clade of budding yeasts includes many hybrid lineages, and hybridization has been proposed as a source for new pathogenic species. Candida orthopsilosis is an emerging opportunistic pathogen for which most clinical isolates are hybrids, each derived from one of at least four independent crosses between the same two parental lineages. To gain insight into the transcriptomic aftermath of hybridization in these pathogens, we analyzed allele-specific gene expression in two independently formed hybrid strains and in a homozygous strain representative of one parental lineage. Our results show that the effect of hybridization on overall gene expression is rather limited, affecting ~4% of the genes studied. However, we identified a larger effect in terms of imbalanced allelic expression, affecting ~9.5% of the heterozygous genes in the hybrids. This effect was larger in the hybrid with more extensive loss of heterozygosity, which may indicate a tendency to avoid loss of heterozygosity in these genes. Consistently, the number of shared genes with allele-specific expression in the two independently formed hybrids was higher than random expectation, suggesting selective retention. Some of the imbalanced genes have functions related to pathogenicity, including zinc transport and superoxide dismutase activities. While it remains unclear whether the observed imbalanced genes play a role in virulence, our results suggest that differences in allele-specific expression may add an additional layer of phenotypic plasticity to traits related to virulence in C. orthopsilosis hybrids.

IMPORTANCE How new pathogens emerge is an important question that remains largely unanswered. Some emerging yeast pathogens are hybrids originated through the crossing of two different species, but how hybridization contributes to higher virulence is unclear. Here, we show that hybrids selectively retain gene regulation plasticity inherited from the two parents and that this plasticity affects genes involved in virulence.

ABSTRACT

Bezlotoxumab is a human monoclonal antibody against Clostridium difficile toxin B, indicated to prevent recurrence of C. difficile infection (rCDI) in high-risk adults receiving antibacterial treatment for CDI. An exploratory genome-wide association study investigated whether human genetic variation influences bezlotoxumab response. DNA from 704 participants who achieved initial clinical cure in the phase 3 MODIFY I/II trials was genotyped. Single nucleotide polymorphisms (SNPs) and human leukocyte antigen (HLA) imputation were performed using IMPUTE2 and HIBAG, respectively. A joint test of genotype and genotype-by-treatment interaction in a logistic regression model was used to screen genetic variants associated with response to bezlotoxumab. The SNP rs2516513 and the HLA alleles HLA-DRB1*07:01 and HLA-DQA1*02:01, located in the extended major histocompatibility complex on chromosome 6, were associated with the reduction of rCDI in bezlotoxumab-treated participants. Carriage of a minor allele (homozygous or heterozygous) at any of the identified loci was related to a larger difference in the proportion of participants experiencing rCDI versus placebo; the effect was most prominent in the subgroup at high baseline risk for rCDI. Genotypes associated with an improved bezlotoxumab response showed no association with rCDI in the placebo cohort. These data suggest that a host-driven, immunological mechanism may impact bezlotoxumab response. Trial registration numbers are as follows: NCT01241552 (MODIFY I) and NCT01513239 (MODIFY II).

IMPORTANCE Clostridium difficile infection is associated with significant clinical morbidity and mortality; antibacterial treatments are effective, but recurrence of C. difficile infection is common. In this genome-wide association study, we explored whether host genetic variability affected treatment responses to bezlotoxumab, a human monoclonal antibody that binds C. difficile toxin B and is indicated for the prevention of recurrent C. difficile infection. Using data from the MODIFY I/II phase 3 clinical trials, we identified three genetic variants associated with reduced rates of C. difficile infection recurrence in bezlotoxumab-treated participants. The effects were most pronounced in participants at high risk of C. difficile infection recurrence. All three variants are located in the extended major histocompatibility complex on chromosome 6, suggesting the involvement of a host-driven immunological mechanism in the prevention of C. difficile infection recurrence.

ABSTRACT

The prevailing paradigm in obstetrics has been the sterile womb hypothesis. However, some are asserting that the placenta, intra-amniotic environment, and fetus harbor microbial communities. The objective of this study was to determine whether the fetal and placental tissues of rhesus macaques harbor bacterial communities. Fetal, placental, and uterine wall samples were obtained from cesarean deliveries without labor (~130/166 days gestation). The presence of bacteria in the fetal intestine and placenta was investigated through culture. The bacterial burden and profiles of the placenta, umbilical cord, and fetal brain, heart, liver, and colon were determined through quantitative real-time PCR and DNA sequencing. These data were compared with those of the uterine wall as well as to negative and positive technical controls. Bacterial cultures of fetal and placental tissues yielded only a single colony of Cutibacterium acnes. This bacterium was detected at a low relative abundance (0.02%) in the 16S rRNA gene profile of the villous tree sample from which it was cultured, yet it was also identified in 12/29 background technical controls. The bacterial burden and profiles of fetal and placental tissues did not exceed or differ from those of background technical controls. By contrast, the bacterial burden and profiles of positive controls exceeded and differed from those of background controls. Among the macaque samples, distinct microbial signals were limited to the uterine wall. Therefore, using multiple modes of microbiologic inquiry, there was not consistent evidence of bacterial communities in the fetal and placental tissues of rhesus macaques.

IMPORTANCE Microbial invasion of the amniotic cavity (i.e., intra-amniotic infection) has been causally linked to pregnancy complications, especially preterm birth. Therefore, if the placenta and the fetus are typically populated by low-biomass microbial communities, current understanding of the role of microbes in reproduction and pregnancy outcomes will need to be fundamentally reconsidered. Could these communities be of benefit by competitively excluding potential pathogens or priming the fetal immune system for the microbial bombardment it will experience upon delivery? If so, what properties (e.g., microbial load and community membership) of these microbial communities preclude versus promote intra-amniotic infection? Given the ramifications of the in utero colonization hypothesis, critical evaluation is required. In this study, using multiple modes of microbiologic inquiry (i.e., culture, quantitative real-time PCR [qPCR], and DNA sequencing) and controlling for potential background DNA contamination, we did not find consistent evidence for microbial communities in the placental and fetal tissues of rhesus macaques.

ABSTRACT

The chemical structures of soluble fiber carbohydrates vary from source to source due to numerous possible linkage configurations among monomers. However, it has not been elucidated whether subtle structural variations might impact soluble fiber fermentation by colonic microbiota. In this study, we tested the hypothesis that subtle structural variations in a soluble polysaccharide govern the community structure and metabolic output of fermenting microbiota. We performed in vitro fecal fermentation studies using arabinoxylans (AXs) from different classes of wheat (hard red spring [AX_HRS], hard red winter [AX_HRW], and spring red winter [AX_SRW]) with identical initial microbiota. Carbohydrate analyses revealed that AX_SRW was characterized by a significantly shorter backbone and increased branching compared with those of the hard varieties. Amplicon sequencing demonstrated that fermentation of AX_SRW resulted in a distinct community structure of significantly higher richness and evenness than those of hard-AX-fermenting cultures. AX_SRW favored OTUs within Bacteroides, whereas AX_HRW and AX_HRS favored Prevotella. Accordingly, metabolic output varied between hard and soft varieties; higher propionate production was observed with AX_SRW and higher butyrate and acetate with AX_HRW and AX_HRS. This study showed that subtle changes in the structure of a dietary fiber may strongly influence the composition and function of colonic microbiota, further suggesting that physiological functions of dietary fibers are highly structure dependent. Thus, studies focusing on interactions among dietary fiber, gut microbiota, and health outcomes should better characterize the structures of the carbohydrates employed.

IMPORTANCE Diet, especially with respect to consumption of dietary fibers, is well recognized as one of the most important factors shaping the colonic microbiota composition. Accordingly, many studies have been conducted to explore dietary fiber types that could predictably manipulate the colonic microbiota for improved health. However, the majority of these studies underappreciate the vastness of fiber structures in terms of their microbial utilization and omit detailed carbohydrate structural analysis. In some cases, this causes conflicting results to arise between studies using (theoretically) the same fibers. In this investigation, by performing in vitro fecal fermentation studies using bran arabinoxylans obtained from different classes of wheat, we showed that even subtle changes in the structure of a dietary fiber result in divergent microbial communities and metabolic outputs. This underscores the need for much higher structural resolution in studies investigating interactions of dietary fibers with gut microbiota, both in vitro and in vivo.

Molar element ratio analysis of element concentrations consists of four basic tools that provide substantial insight into the lithogeochemistry (and mineralogy) of rocks under examination. These tools consist of: (1) conserved element ratio analysis; (2) Pearce element ratio analysis; (3) general element ratio analysis; and (4) lithogeochemical mineral mode analysis. Conserved element ratio analysis is useful in creating a chemostratigraphic model for the host rocks to mineral deposits, whereas Pearce element ratio analysis and general element ratio analysis are primarily used to identify mineralogical and metasomatic controls on rock compositions and to investigate and quantify the extent of the material transfers that formed the host rocks and mineralization. Lithogeochemical mineral mode analysis converts element concentrations into mineral concentrations using a matrix-based change-of-basis operation, allowing lithogeochemical data to be interpreted in terms of mineral modes. It can be used to provide proper names to rocks, an important activity for an exploration geologist because of the implications that rock names have on genetic processes and mineral deposit models.

This paper provides a review of the theoretical foundations of each of these four tools and then illustrates how these techniques have been used in a variety of exploration applications to assist in the search for, evaluation and planning of, and the mining of mineral deposits. Examples include the evaluation of total digestion lithogeochemical datasets from mineral deposits hosted by igneous and sedimentary rocks and formed by hydrothermal and igneous processes. In addition, this paper illustrates a more recent geometallurgical application of these methods, whereby the mineral proportions determined by lithogeochemical mineral mode analysis are used to predict rock properties and obtain the ore body knowledge critical for resource evaluation, mine planning, mining and mine remediation.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

Multi-element geochemical surveys of rocks, soils, stream/lake/floodplain sediments and regolith are typically carried out at continental, regional and local scales. The chemistry of these materials is defined by their primary mineral assemblages and their subsequent modification by comminution and weathering. Modern geochemical datasets represent a multi-dimensional geochemical space that can be studied using multivariate statistical methods from which patterns reflecting geochemical/geological processes are described (process discovery). These patterns form the basis from which probabilistic predictive maps are created (process validation). Processing geochemical survey data requires a systematic approach to effectively interpret the multi-dimensional data in a meaningful way. Problems that are typically associated with geochemical data include closure, missing values, censoring, merging, levelling different datasets and adequate spatial sample design. Recent developments in advanced multivariate analytics, geospatial analysis and mapping provide an effective framework to analyse and interpret geochemical datasets. Geochemical and geological processes can often be recognized through the use of data discovery procedures such as the application of principal component analysis. Classification and predictive procedures can be used to confirm lithological variability, alteration and mineralization. Geochemical survey data of lake/till sediments from Canada and of floodplain sediments from Australia show that predictive maps of bedrock and regolith processes can be generated. Upscaling a multivariate statistics-based prospectivity analysis for arc-related Cu–Au mineralization from a regional survey in the southern Thomson Orogen in Australia to the continental scale, reveals a number of regions with a similar (or stronger) multivariate response and hence potentially similar (or higher) mineral potential throughout Australia.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

Among the emerging techniques to detect the real footprint of buried ore deposits is isotope tracing. Novel and automated preparation systems such as continuous flow isotope ratio mass spectrometry, off-axis integrated cavity output spectroscopy for isotopic compositions of selected molecules, multi-collector inductively coupled-plasma mass spectrometry (ICP-MS), triple quadrupole ICP-MS, laser ablation ICP-MS, and a multitude of inline preparation systems have facilitated the use of isotopes as tracers in mineral exploration, as costs for isotope analyses have decreased and the time required for the analyses has improved. In addition, the isotope systems being used have expanded beyond the traditional light stable and Pb isotopes to include a multitude of elements that behave differently during processes that promote the mobilization of elements during both primary and secondary dispersion. Isotopes are also being used to understand barren areas that lack a critical process to form an ore deposit and to reveal precise redox mechanisms. The goal is to be able to use isotopes to reflect a definitive process that occurs in association with the deposit and not in barren systems, and then to relate these to something that is easier to measure, namely elemental concentrations. As new generations of exploration and environmental scientists are becoming more comfortable with the application of isotopes to effectively trace processes involved in geoscience, and new technologies for rapid and inexpensive analyses of isotopes are continually being developed, novel applications of isotope tracing are becoming more mainstream.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

In the past decade, significant research efforts have been devoted to mineral chemistry studies to assist porphyry exploration. These activities can be divided into two major fields of research: (1) porphyry indicator minerals (PIMs), which are used to identify the presence of, or potential for, porphyry-style mineralization based on the chemistry of magmatic minerals such as zircon, plagioclase and apatite, or resistate hydrothermal minerals such as magnetite; and (2) porphyry vectoring and fertility tools (PVFTs), which use the chemical compositions of hydrothermal minerals such as epidote, chlorite and alunite to predict the likely direction and distance to mineralized centres, and the potential metal endowment of a mineral district. This new generation of exploration tools has been enabled by advances in and increased access to laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), short-wave length infrared (SWIR), visible near-infrared (VNIR) and hyperspectral technologies. PIMs and PVFTs show considerable promise for exploration and are starting to be applied to the diversity of environments that host porphyry and epithermal deposits globally. Industry has consistently supported development of these tools, and in the case of PVFTs encouraged by several successful blind tests where deposit centres have successfully been predicted from distal propylitic settings. Industry adoption is steadily increasing but is restrained by a lack of the necessary analytical equipment and expertise in commercial laboratories, and also by the ongoing reliance on well-established geochemical exploration techniques (e.g. sediment, soil and rock chip sampling) that have aided the discovery of near-surface resources over many decades, but are now proving less effective in the search for deeply buried mineral resources and for those concealed under cover.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

There have been several advances in inductively coupled plasma-mass spectrometer (ICP-MS) analytical technologies in the last decade. Collision/reaction cell ICP-MS and triple quadrupole ICP-MS techniques can produce lower detection limits for select elements that experience interferences with a standard quadrupole (e.g. Se and As). Triple quadrupole ICP-MS, in particular, can eliminate virtually all polyatomic or isobaric interferences for highly accurate measurements of some element isotopes systematics that are of great interest in mineral exploration, namely Pb/Pb. Laser ablation ICP-MS has become more popular as an effective analytical tool to measure mineral grain trace elements, which could assist in vectoring to mineralization or exploration drill targets. The ablation of a spot on a Li-borate fused glass disk paired with XRF analysis has also gained popularity as an alternative to total whole rock characterization packages that employ several separate digestions and analytical methods. While there have been several advancements in ICP-MS technologies in exploration geochemistry, they have not been widely accepted or implemented. This slow adaptation could be due to the extended recession in the mining industry between 2012 and 2017. It is also possible that standard ICP-MS data (i.e. no collision/reaction cell) is still fit for purpose. This stands in stark contrast to implementation of ICP-MS in the previous decade (1997–2007), which was transformational for the industry.

Consideration of all elements from large multi-element ICP-MS analytical suites for mineral exploration can be an extremely powerful tool in the exploration toolkit. The discovery of the White Gold District, Yukon, is a prime example of how the utilization of soil geochemical data, when plotted spatially, can vector to gold mineralization. The presence of Au + As + Sb soil anomalies were key to delineating mineralization, especially when accompanied by publicly available geological, geographical and geophysical data. Additionally, elements and element ratios not typically considered in Au exploration, including Ni and U, were utilized to determine the lithological and structural controls on mineralization. The availability of multi-element ICP-MS data was also useful in the discovery of the Cascadero Copper Taron Caesium deposit. Ore-grade Cs was discovered only because Cs was included in the multi-element ICP-MS exploration geochemistry suite. Before the availability of ICP-MS, it is unlikely that this deposit would have been discovered.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

The bioprocessing industry uses recombinant mammalian cell lines to generate therapeutic biologic drugs. To ensure consistent product quality of the therapeutic proteins, it is imperative to have a controlled production process. Regulatory agencies and the biotechnology industry consider cell line "clonal origin" an important aspect of maintaining process control. Demonstration of clonal origin of the cell substrate, or production cell line, has received considerable attention in the past few years, and the industry has improved methods and devised standards to increase the probability and/or assurance of clonal derivation. However, older production cell lines developed before the implementation of these methods, herein referred to as "legacy cell lines," may not meet current regulatory expectations for demonstration of clonal derivation. In this article, the members of the IQ Consortium Working Group on Clonality present our position that the demonstration of process consistency and product comparability of critical quality attributes throughout the development life cycle should be sufficient to approve a license application without additional genetic analysis to support clonal origin, even for legacy cell lines that may not meet current day clonal derivation standards. With this commentary, we discuss advantages and limitations of genetic testing methods to support clonal derivation of legacy cell lines and wish to promote a mutual understanding with the regulatory authorities regarding their optional use during early drug development, subsequent to Investigational New Drug (IND) application and before demonstration of product and process consistency at Biologics License Applications (BLA) submission.

This technology review, written by a small group of pharmaceutical microbiologists experienced in cell therapies, discussed a risk-based approach to microbiological contamination detection and control during gene and cell therapy production. Topics discussed include a brief overview of cell therapies, a risk analysis related to donor selection, cell collection and infectious agent testing, cell transformation and expansion, packaging, storage, and administration, and cell therapy microbial contamination testing and release.

Glass is the favorite material for parenteral packaging because of its physico-chemical properties. Type I borosilicate glass is worldwide use at this scope, but it may have some issues related to breakage, corrosion and delamination that might compromise the drug quality, safety and efficacy. These issues can be mitigated and avoided starting from the appropriate selection of the most suitable raw material at the early stage of the glass container design. In this study, Type I borosilicate glass vials manufactured using two glass tubes having different chemical compositions, were studied and compared in terms of their resistance to corrosion. Testing design was applied with the aim to select the best practice approach comparing different storage simulation conditions: ageing treatment through autoclaving and stability testing (real-time and accelerated). Clear differences were found between the different glass types in terms of hydrolytic and corrosion resistance that highlighted the relation between chemical composition and glass chemical durability. Non-negligible differences were also observed using different storage conditions.

Pyrazinamide (PZA) is a cornerstone antimicrobial drug used exclusively for the treatment of tuberculosis (TB). Due to its ability to shorten drug therapy by 3 months and reduce disease relapse rates, PZA is considered an irreplaceable component of standard first-line short-course therapy for drug-susceptible TB and second-line treatment regimens for multidrug-resistant TB. Despite over 60 years of research on PZA and its crucial role in current and future TB treatment regimens, the mode of action of this unique drug remains unclear. Defining the mode of action for PZA will open new avenues for rational design of novel therapeutic approaches for the treatment of TB. In this review, we discuss the four prevailing models for PZA action, recent developments in modulation of PZA susceptibility and resistance, and outlooks for future research and drug development.

Viruses and mobile genetic elements are molecular parasites or symbionts that coevolve with nearly all forms of cellular life. The route of virus replication and protein expression is determined by the viral genome type. Comparison of these routes led to the classification of viruses into seven "Baltimore classes" (BCs) that define the major features of virus reproduction. However, recent phylogenomic studies identified multiple evolutionary connections among viruses within each of the BCs as well as between different classes. Due to the modular organization of virus genomes, these relationships defy simple representation as lines of descent but rather form complex networks. Phylogenetic analyses of virus hallmark genes combined with analyses of gene-sharing networks show that replication modules of five BCs (three classes of RNA viruses and two classes of reverse-transcribing viruses) evolved from a common ancestor that encoded an RNA-directed RNA polymerase or a reverse transcriptase. Bona fide viruses evolved from this ancestor on multiple, independent occasions via the recruitment of distinct cellular proteins as capsid subunits and other structural components of virions. The single-stranded DNA (ssDNA) viruses are a polyphyletic class, with different groups evolving by recombination between rolling-circle-replicating plasmids, which contributed the replication protein, and positive-sense RNA viruses, which contributed the capsid protein. The double-stranded DNA (dsDNA) viruses are distributed among several large monophyletic groups and arose via the combination of distinct structural modules with equally diverse replication modules. Phylogenomic analyses reveal the finer structure of evolutionary connections among RNA viruses and reverse-transcribing viruses, ssDNA viruses, and large subsets of dsDNA viruses. Taken together, these analyses allow us to outline the global organization of the virus world. Here, we describe the key aspects of this organization and propose a comprehensive hierarchical taxonomy of viruses.

Although enteroviruses are associated with a wide variety of diseases and conditions, their mode of replication is well conserved. Their genome is carried as a single, positive-sense RNA strand. At the 5' end of the strand is an approximately 90-nucleotide self-complementary region called the 5' cloverleaf, or the oriL. This noncoding region serves as a platform upon which host and virus proteins, including the 3B, 3C, and 3D virus proteins, assemble in order to initiate replication of a negative-sense RNA strand. The negative strand in turn serves as a template for synthesis of multiple positive-sense RNA strands. Building on structural studies of individual RNA stem-loops, the structure of the intact 5' cloverleaf from rhinovirus has recently been determined via nuclear magnetic resonance/small-angle X-ray scattering (NMR/SAXS)-based methods, while structures have also been determined for enterovirus 3A, 3B, 3C, and 3D proteins. Analysis of these structures, together with structural and modeling studies of interactions between host and virus proteins and RNA, has begun to provide insight into the enterovirus replication mechanism and the potential to inhibit replication by blocking these interactions.

Escherichia coli ribosomal protein (r-protein) L4 has extraribosomal biological functions. Previously, we described L4 as inhibiting RNase E activity through protein-protein interactions. Here, we report that from stabilized transcripts regulated by L4-RNase E, mRNA levels of tnaA (encoding tryptophanase from the tnaCAB operon) increased upon ectopic L4 expression, whereas TnaA protein levels decreased. However, at nonpermissive temperatures (to inactivate RNase E), tnaA mRNA and protein levels both increased in an rne temperature-sensitive [rne(Ts)] mutant strain. Thus, L4 protein fine-tunes TnaA protein levels independently of its inhibition of RNase E. We demonstrate that ectopically expressed L4 binds with transcribed spacer RNA between tnaC and tnaA and downregulates TnaA translation. We found that deletion of the 5' or 3' half of the spacer compared to the wild type resulted in a similar reduction in TnaA translation in the presence of L4. In vitro binding of L4 to the tnaC-tnaA transcribed spacer RNA results in changes to its secondary structure. We reveal that during early stationary-phase bacterial growth, steady-state levels of tnaA mRNA increased but TnaA protein levels decreased. We further confirm that endogenous L4 binds to tnaC-tnaA transcribed spacer RNA in cells at early stationary phase. Our results reveal the novel function of L4 in fine-tuning TnaA protein levels during cell growth and demonstrate that r-protein L4 acts as a translation regulator outside the ribosome and its own operon.

IMPORTANCE Some ribosomal proteins have extraribosomal functions in addition to ribosome translation function. The extraribosomal functions of several r-proteins control operon expression by binding to own-operon transcripts. Previously, we discovered a posttranscriptional, RNase E-dependent regulatory role for r-protein L4 in the stabilization of stress-responsive transcripts. Here, we found an additional extraribosomal function for L4 in regulating the tna operon by L4-intergenic spacer mRNA interactions. L4 binds to the transcribed spacer RNA between tnaC and tnaA and alters the structural conformation of the spacer RNA, thereby reducing the translation of TnaA. Our study establishes a previously unknown L4-mediated mechanism for regulating gene expression, suggesting that bacterial cells have multiple strategies for controlling levels of tryptophanase in response to varied cell growth conditions.

In bacterial populations, quorum sensing (QS) systems participate in the regulation of specialization processes and regulate collective behaviors that mediate interactions and allow survival of the species. In Gram-positive bacteria, QS systems of the RRNPP family (Rgg, Rap, NprR, PlcR, and PrgX) consist of intracellular receptors and their cognate signaling peptides. Two of these receptors, Rap and NprR, have regained attention in Bacillus subtilis and the Bacillus cereus group. Some Rap proteins, such as RapH and Rap60, are multifunctional and/or redundant in function, linking the specialization processes of sporulation and competence, as well as global expression changes in the transition phase in B. subtilis. NprR, an evolutionary intermediate between Rap and RRNPP transcriptional activators, is a bifunctional regulator that modulates sporulation initiation and activates nutrient scavenging genes. In this review, we discuss how these receptors switch between functions and connect distinct signaling pathways. Based on structural evidence, we propose that RapH and Rap60 should be considered moonlighting proteins. Additionally, we analyze an evolutionary and ecological perspective to understand the multifunctionality and functional redundancy of these regulators in both Bacillus spp. and non-Bacillus Firmicutes. Understanding the mechanistic, structural, ecological, and evolutionary basis for the multifunctionality and redundancy of these QS systems is a key step for achieving the development of innovative technologies for health and agriculture.

Streptococcus pyogenes (Lancefield group A Streptococcus [GAS]) is a β-hemolytic human-selective pathogen that is responsible for a large number of morbid and mortal infections in humans. For efficient infection, GAS requires different types of surface proteins that provide various mechanisms for evading human innate immune responses, thus enhancing pathogenicity of the bacteria. Many such virulence-promoting proteins, including the major surface signature M protein, are translocated after biosynthesis through the cytoplasmic membrane and temporarily tethered to this membrane via a type 1 transmembrane domain (TMD) positioned near the COOH terminus. In these proteins, a sorting signal, LPXTG, is positioned immediately upstream of the TMD, which is cleaved by the membrane-associated transpeptidase, sortase A (SrtA), leading to the covalent anchoring of these proteins to newly emerging l-Ala–l-Ala cross-bridges of the growing peptidoglycan cell wall. Herein, we show that inactivation of the srtA gene in a skin-tropic pattern D GAS strain (AP53) results in retention of the M protein in the cell membrane. However, while the isogenic AP53 srtA strain is attenuated in overall pathogenic properties due to effects on the integrity of the cell membrane, our data show that the M protein nonetheless can extend from the cytoplasmic membrane through the cell wall and then to the surface of the bacteria and thereby retain its important properties of productively binding and activating fluid-phase host plasminogen (hPg). The studies presented herein demonstrate an underappreciated additional mechanism of cell surface display of bacterial virulence proteins via their retention in the cell membrane and extension to the GAS surface.

IMPORTANCE Group A Streptococcus pyogenes (GAS) is a human-specific pathogen that produces many surface factors, including its signature M protein, that contribute to its pathogenicity. M proteins undergo specific membrane localization and anchoring to the cell wall via the transpeptidase sortase A. Herein, we explored the role of sortase A function on M protein localization, architecture, and function, employing, a skin-tropic GAS isolate, AP53, which expresses a human plasminogen (hPg)-binding M (PAM) Protein. We showed that PAM anchored in the cell membrane, due to the targeted inactivation of sortase A, was nonetheless exposed on the cell surface and functionally interacted with host hPg. We demonstrate that M proteins, and possibly other sortase A-processed proteins that are retained in the cell membrane, can still function to initiate pathogenic processes by this underappreciated mechanism.

The capacity of Listeria monocytogenes to adapt to environmental changes is facilitated by a large number of regulatory proteins encoded by its genome. Among these proteins are the uncharacterized LysR-type transcriptional regulators (LTTRs). LTTRs can work as positive and/or negative transcription regulators at both local and global genetic levels. Previously, our group determined by comparative genome analysis that one member of the LTTRs (NCBI accession no. WP_003734782) was present in pathogenic strains but absent from nonpathogenic strains. The goal of the present study was to assess the importance of this transcription factor in the virulence of L. monocytogenes strain F2365 and to identify its regulons. An L. monocytogenes strain lacking lysR (the F2365lysR strain) displayed significant reductions in cell invasion of and adhesion to Caco-2 cells. In plaque assays, the deletion of lysR resulted in a 42.86% decrease in plaque number and a 13.48% decrease in average plaque size. Furthermore, the deletion of lysR also attenuated the virulence of L. monocytogenes in mice following oral and intraperitoneal inoculation. The analysis of transcriptomics revealed that the transcript levels of 139 genes were upregulated, while 113 genes were downregulated in the F2365lysR strain compared to levels in the wild-type bacteria. lysR-repressed genes included ABC transporters, important for starch and sucrose metabolism as well as glycerolipid metabolism, flagellar assembly, quorum sensing, and glycolysis/gluconeogenesis. Conversely, lysR activated the expression of genes related to fructose and mannose metabolism, cationic antimicrobial peptide (CAMP) resistance, and beta-lactam resistance. These data suggested that lysR contributed to L. monocytogenes virulence by broad impact on multiple pathways of gene expression.

IMPORTANCE Listeria monocytogenes is the causative agent of listeriosis, an infectious and fatal disease of animals and humans. In this study, we have shown that lysR contributes to Listeria pathogenesis and replication in cell lines. We also highlight the importance of lysR in regulating the transcription of genes involved in different pathways that might be essential for the growth and persistence of L. monocytogenes in the host or under nutrient limitation. Better understanding L. monocytogenes pathogenesis and the role of various virulence factors is necessary for further development of prevention and control strategies.

The type VI secretion system (T6SS) is a weapon for delivering effectors into target cells that is widespread in Gram-negative bacteria. The T6SS is a highly versatile machine, as it can target both eukaryotic and prokaryotic cells, and it has been proposed that T6SSs are adapted to the specific needs of each bacterium. The expression of T6SS gene clusters and the activation of the secretion apparatus are therefore tightly controlled. In enteroaggregative Escherichia coli (EAEC), the sci1 T6SS gene cluster is subject to a complex regulation involving both the ferric uptake regulator (Fur) and DNA adenine methylase (Dam)-dependent DNA methylation. In this study, an additional, internal, promoter was identified within the sci1 gene cluster using +1 transcriptional mapping. Further analyses demonstrated that this internal promoter is controlled by a mechanism strictly identical to that of the main promoter. The Fur binding box overlaps the –10 transcriptional element and a Dam methylation site, GATC-32. Hence, the expression of the distal sci1 genes is repressed and the GATC-32 site is protected from methylation in iron-rich conditions. The Fur-dependent protection of GATC-32 was confirmed by an in vitro methylation assay. In addition, the methylation of GATC-32 negatively impacted Fur binding. The expression of the sci1 internal promoter is therefore controlled by iron availability through Fur regulation, whereas Dam-dependent methylation maintains a stable ON expression in iron-limited conditions.

IMPORTANCE Bacteria use weapons to deliver effectors into target cells. One of these weapons, the type VI secretion system (T6SS), assembles a contractile tail acting as a spring to propel a toxin-loaded needle. Its expression and activation therefore need to be tightly regulated. Here, we identified an internal promoter within the sci1 T6SS gene cluster in enteroaggregative E. coli. We show that this internal promoter is controlled by Fur and Dam-dependent methylation. We further demonstrate that Fur and Dam compete at the –10 transcriptional element to finely tune the expression of T6SS genes. We propose that this elegant regulatory mechanism allows the optimum production of the T6SS in conditions where enteroaggregative E. coli encounters competing species.

Shigella species, the causal agents of bacillary dysentery, use a type III secretion system (T3SS) to inject two waves of virulence proteins, known as effectors, into the colonic epithelium to subvert host cell machinery. Prior to host cell contact and secretion of the first wave of T3SS effectors, OspD1, an effector and antiactivator protein, prevents premature production of the second wave of effectors. Despite this important role, regulation of the ospD1 gene is not well understood. While ospD1 belongs to the large regulon of VirB, a transcriptional antisilencing protein that counters silencing mediated by the histone-like nucleoid structuring protein H-NS, it remains unclear if VirB directly or indirectly regulates ospD1. Additionally, it is not known if ospD1 is regulated by H-NS. Here, we identify the primary ospD1 transcription start site (+1) and show that the ospD1 promoter is remotely regulated by both VirB and H-NS. Our findings demonstrate that VirB regulation of ospD1 requires at least one of the two newly identified VirB regulatory sites, centered at –978 and –1270 relative to the ospD1 +1. Intriguingly, one of these sites lies on a 193-bp sequence found in three conserved locations on the large virulence plasmids of Shigella. The region required for H-NS-dependent silencing of ospD1 lies between –1120 and –820 relative to the ospD1 +1. Thus, our study provides further evidence that cis-acting regulatory sequences for transcriptional antisilencers and silencers, such as VirB and H-NS, can lie far upstream of the canonical bacterial promoter region (i.e., –250 to +1).

IMPORTANCE Transcriptional silencing and antisilencing mechanisms regulate virulence gene expression in many important bacterial pathogens. In Shigella species, plasmid-borne virulence genes, such as those encoding the type III secretion system (T3SS), are silenced by the histone-like nucleoid structuring protein H-NS and antisilenced by VirB. Previous work at the plasmid-borne icsP locus revealed that VirB binds to a remotely located cis-acting regulatory site to relieve transcriptional silencing mediated by H-NS. Here, we characterize a second example of remote VirB antisilencing at ospD1, which encodes a T3SS antiactivator and effector. Our study highlights that remote transcriptional silencing and antisilencing occur more frequently in Shigella than previously thought, and it raises the possibility that long-range transcriptional regulation in bacteria is commonplace.

Diadenosine tetraphosphate (Ap₄A) is a dinucleotide found in both prokaryotes and eukaryotes. In bacteria, its cellular levels increase following exposure to various stress signals and stimuli, and its accumulation is generally correlated with increased sensitivity to a stressor(s), decreased pathogenicity, and enhanced antibiotic susceptibility. Ap₄A is produced as a by-product of tRNA aminoacylation, and is cleaved to ADP molecules by hydrolases of the ApaH and Nudix families and/or by specific phosphorylases. Here, considering evidence that the recombinant protein YqeK from Staphylococcus aureus copurified with ADP, and aided by thermal shift and kinetic analyses, we identified the YqeK family of proteins (COG1713) as an unprecedented class of symmetrically cleaving Ap₄A hydrolases. We validated the functional assignment by confirming the ability of YqeK to affect in vivo levels of Ap₄A in B. subtilis. YqeK shows a catalytic efficiency toward Ap₄A similar to that of the symmetrically cleaving Ap₄A hydrolases of the known ApaH family, although it displays a distinct fold that is typical of proteins of the HD domain superfamily harboring a diiron cluster. Analysis of the available 3D structures of three members of the YqeK family provided hints to the mode of substrate binding. Phylogenetic analysis revealed the occurrence of YqeK proteins in a consistent group of Gram-positive bacteria that lack ApaH enzymes. Comparative genomics highlighted that yqeK and apaH genes share a similar genomic context, where they are frequently found in operons involved in integrated responses to stress signals.

IMPORTANCE Elevation of Ap₄A level in bacteria is associated with increased sensitivity to heat and oxidative stress, reduced antibiotic tolerance, and decreased pathogenicity. ApaH is the major Ap₄A hydrolase in gamma- and betaproteobacteria and has been recently proposed as a novel target to weaken the bacterial resistance to antibiotics. Here, we identified the orphan YqeK protein family (COG1713) as a highly efficient Ap₄A hydrolase family, with members distributed in a consistent group of bacterial species that lack the ApaH enzyme. Among them are the pathogens Staphylococcus aureus, Streptococcus pneumoniae, and Mycoplasma pneumoniae. By identifying the player contributing to Ap₄A homeostasis in these bacteria, we disclose a novel target to develop innovative antibacterial strategies.

Chitotriosidase (CHIT1) is a highly conserved and regulated chitinase secreted by activated macrophages; it is a member of the 18-glycosylase family (GH18). CHIT1 is the most prominent chitinase in humans, can cleave chitin and participates in the body's immune response and is associated with inflammation, infection, tissue damage and remodelling processes. Recently, CHIT1 has been reported to be involved in the molecular pathogenesis of pulmonary fibrosis, bronchial asthma, COPD and pulmonary infections, shedding new light on the role of these proteins in lung pathophysiology. The potential roles of CHIT1 in lung diseases are reviewed in this article.

Physician-led thoracic ultrasound (TUS) has substantially changed how respiratory disorders, and in particular pleural diseases, are managed. The use of TUS as a point-of-care test enables the respiratory physician to quickly and accurately diagnose pleural pathology and ensure safe access to the pleural space during thoracentesis or chest drain insertion. Competence in performing TUS is now an obligatory part of respiratory speciality training programmes in different parts of the world. Pleural physicians with higher levels of competence routinely use TUS during the planning and execution of more sophisticated diagnostic and therapeutic interventions, such as core needle pleural biopsies, image-guided drain insertion and medical thoracoscopy. Current research is gauging the potential of TUS in predicting the outcome of different pleural interventions and how it can aid in tailoring the optimum treatment according to different TUS-based parameters.

Background

People with pulmonary fibrosis often experience a protracted time to diagnosis, high symptom burden and limited disease information. This review aimed to identify the supportive care needs reported by people with pulmonary fibrosis and their caregivers.

An aberrant bi-apical Follicucullus specimen (Albaillellaria, Radiolaria) has been discovered from an upper Guadalupian (Middle Permian) chert block of the Kamiaso Unit of the Mino terrane, central Japan. If this specimen was formed with double malformation, it would be the oldest record of this phenomenon in radiolarians and the first record of its kind in Albaillellaria.

Calcareous nannofossils are a group of micrometric fossils abundantly found in marine sediments. This group is mainly composed of coccoliths, platelets produced by the unicellular algae coccolithophores, and nannoliths whose biological affinity remains unknown. Calcareous nannofossils have a continuous record for the past 215 myr (Bown 1998) and can be found in almost every marine environment from coast to open oceans and from the Equator to the poles in surface waters (Winter et al. 1994). These microfossils are also made of low-Mg calcite (Siesser 1977; Stoll et al. 2001) which is resistant to dissolution and a common matrix for geochemical analyses in palaeoceanography. Hence, calcareous nannofossils could be one of the best fossils for palaeoceanographical studies for the last 215 myr. Their use in geochemistry is, however, less common than planktic foraminifera due to their small sizes, masses (10–1000 pg) and complex vital effects. Despite the fact that nannofossils are very small (2–20 µm), the development of high-resolution analytical devices opens up the opportunity to analyse single nannofossils or even parts of them. This is a growing field of nannofossil research.

A new larger benthic porcelaneous foraminifer of soritid affinity is described as Tarburina zagrosiana n. gen., n. sp. from the late Maastrichtian of the Tarbur Formation, Zagros Zone, SW Iran. It occurs in foraminiferal–dasycladalean wackestones and packstones, in association with Loftusia ssp., dicyclinids/cuneolinids, Neobalkhania bignoti Cherchi & Schroeder, Gyroconulina columellifera Schroeder & Darmoian, Spirolina? farsiana Schlagintweit & Rashidi, Broeckina cf. dufrenoyi (d'Archiac), other benthic foraminifers, and dasycladalean algae. Due to its elongate test and marginal chamber subdivision by aligned vertical partitions, Tarburina n. gen. can be compared with representatives of the Praerhapydionininae. The interio-marginal slit-like foramina/aperture of Tarburina represents an outstanding feature in complex porcelaneous taxa. The monospecific genus Tarburina is considered a Maastrichtian newcomer within the Late Cretaceous Global Community Maturation cycle of larger benthic foraminifera. A biostratigraphic and palaeobiogeographical restriction seems possible, as reported for many other Late Cretaceous larger benthic foraminifera.

Planktonic foraminifera are a source of important geochemical, palaeoceanographic, and palaeontological data. However, many aspects of their ecology remain poorly understood, including whether or not gross morphology has an ecological function. Here, we measure the force needed to crush multiple planktonic foraminiferal morphotypes from modern core top and tow samples. We find significant differences in the resistance of different morphotypes to compressional force. Three species, Globorotalia tumida (biconvex, keeled), Menardella menardii (discoidal, keeled), Truncorotalia truncatulinoides (conical, keeled), require on average 59% more force (1.07 v. 0.47 N) to crush than the least resistant species (Orbulina universa and Trilobatus sacculifer) in core-top samples. Towed samples of pre-gametogenic individuals also show significant differences of the same magnitude (0.693 v. 0.53 N) between the conical (T. truncatulinoides) and globular/spherical morphologies (Globoconella inflata and O. universa). We hypothesize that the greater compressional strength of certain shapes confers a fitness advantage against predators and could contribute to the repeated, convergent evolution of keeled, conical and bi-convex forms in planktonic foraminifer lineages.

Supplementary material: Raw data for all crushing experiments, wall thickness measurements, and results for all pair-wise Kolmogorov-Smirnov Tests are available at https://doi.org/10.6084/m9.figshare.c.3725236.v1

New scanning electron microscope observations of unadulterated calcareous nannofossil assemblages on lamina surfaces of Cretaceous Tanzania Drilling Project sediments reveal high diversity in the <3 µm size-range and high abundances of small and frangible morphologies. These assemblages prompt comparison to modern assemblages, which show similar high diversity and abundance of very small and fragile taxa, although these assemblages are generally not preserved in the fossil record due to taphonomic filtering. Not only are there broad similarities between the general composition of modern assemblages and those of the Tanzanian lagerstätte, but also our discovery of several new Cretaceous taxa provides evidence for greatly extended fossil lineages of extant orders, with implications for both deep-time biodiversity divergence and survival through the end-Cretaceous mass extinction. Our findings include: new species that are the first-recorded Mesozoic representatives of the extant Syracosphaeraceae and Papposphaeraceae; potentially previously unrecorded diversity in the Mesozoic Calciosoleniaceae, another extant order, represented by extant species that have been described already; and new species and unusually high abundances of the Mesozoic Stephanolithiaceae. We also highlight the extended range of an incertae sedis Cenozoic genus, Ellipsolithus, into at least the Turonian.

Here, we describe seven new miniscule to very small Cretaceous species: Syracosphaera antiqua, S. repagula, Pocillithus macleodii, P. crucifer, Stradnerlithus wendleri, S.? haynesiae and Tortolithus foramen.

Assemblages of upper lower through upper Miocene Discoaster spp. have been quantified from Integrated Ocean Drilling Program (IODP) Site U1338 in the eastern equatorial Pacific Ocean. These assemblages can be grouped into five broad morphological categories: six-rayed with bifurcated ray tips, six-rayed with large central areas, six-rayed with pointed ray tips, five-rayed with bifurcated ray tips and five-rayed with pointed ray tips. Discoaster deflandrei dominates the assemblages prior to 15.8 Ma. The decline in abundance of D. deflandrei close to the early–middle Miocene boundary occurs together with the evolution of the D. variabilis group, including D. signus and D. exilis. Six-rayed discoasters having large central areas become a prominent member of the assemblages for a 400 ka interval in the late middle Miocene. Five- and six-rayed forms having pointed tips become prominent in the early late Miocene and show a strong antiphasing relationship with the D. variabilis group. Discoaster bellus completely dominates the Discoaster assemblages for a 400 ka interval in the middle late Miocene. Abundances of all discoasters, or discoasters at the species level, show only (surprisingly) weak correlations to carbonate contents or oxygen and carbon isotopes of bulk sediment when calculated over the entire sample interval.