The proteostasis network is regulated by transcellular communication to promote health and fitness in metazoans. In Caenorhabditis elegans, signals from the germline initiate the decline of proteostasis and repression of cell stress responses at reproductive maturity, indicating that commitment to reproduction is detrimental to somatic health. Here we show that proteostasis and stress resilience are also regulated by embryo-to-mother communication in reproductive adults. To identify genes that act directly in the reproductive system to regulate somatic proteostasis, we performed a tissue targeted genetic screen for germline modifiers of polyglutamine aggregation in muscle cells. We found that inhibiting the formation of the extracellular vitelline layer of the fertilized embryo inside the uterus suppresses aggregation, improves stress resilience in an HSF-1-dependent manner, and restores the heat-shock response in the somatic tissues of the parent. This pathway relies on DAF-16/FOXO activation in vulval tissues to maintain stress resilience in the mother, suggesting that the integrity of the embryo is monitored by the vulva to detect damage and initiate an organismal protective response. Our findings reveal a previously undescribed transcellular pathway that links the integrity of the developing progeny to proteostasis regulation in the parent.

Editor’s Note: This article is adapted from the address Ms. Valentine delivered as the recipient of the American Diabetes Association’s (ADA’s) Outstanding Educator in Diabetes Award for 2019. She delivered the address in June 2019 at the Association’s 79th Scientific Sessions in San Francisco, CA. A webcast of this speech is available for viewing at the ADA website (professional.diabetes.org/webcast/outstanding-educator-diabetes-award-lecture%E2%80%94-most-important-thing-we-give-people-hope).

Background

Advances in information communications technology (ICT) provide opportunities for enhanced diabetes care. Knowledge of the more acceptable communication modalities in patients of different ages will help to inform the direction of future innovations.

Factors contributing to therapeutic inertia related to patients’ medication experiences include concerns about side effects and out-of-pocket costs, stigmatization for having diabetes, confusion about frequent changes in evidence-based guidelines, low health literacy, and social determinants of health. A variety of solutions to this multifactorial problem may be necessary, including integrating pharmacists into interprofessional care teams, using medication refill synchronization programs, maximizing time with patients to discuss fears and concerns, being cognizant of language used to discuss diabetes-related topics, and avoiding stigmatizing patients. Managing diabetes successfully is a team effort, and the full commitment of all team members (including patients) is required to achieve desired outcomes through an individualized approach.

Despite significant advances in therapies for pediatric type 1 diabetes, achievement of glycemic targets remains elusive, and management remains burdensome for patients and their families. This article identifies common challenges in diabetes management at the patient-provider and health care system levels and proposes practical approaches to overcoming therapeutic inertia to enhance health outcomes for youth with type 1 diabetes.

Many people with diabetes do not achieve individualized treatment targets. Therapeutic inertia, the underuse of effective therapies in preventing serious clinical end points, is a frequent, important contributor to this failure. Clinicians, patients, health systems, payors, and producers of medications, devices, and other products for those with diabetes all play a role in the development of therapeutic inertia and can all help to reduce it.

Background and objectives

The effects of active case finding (ACF) models that mobilise community networks for early identification and treatment of tuberculosis (TB) remain unknown. We investigated and compared the effect of community-based ACF using a seed-and-recruit model with one-off roving ACF and passive case finding (PCF) on the time to treatment initiation and identification of bacteriologically confirmed TB.

Chronic cough is a common complaint in the general population but there are no precise data on the incidence of, and prospectively examined risk factors for chronic cough in a population-based setting. Therefore, we investigated the period prevalence, incidence and risk factors for chronic cough in adult subjects.

In a prospective population-based cohort study among subjects aged ≥45 years, data on chronic cough were collected on two separate occasions using a standardised questionnaire. Chronic cough was defined as daily coughing for at least 3 months duration during the preceding 2 years. Potential risk factors were gathered by interview, physical examination and several investigations.

Of the 9824 participants in this study, 1073 (10.9%) subjects had chronic cough at baseline. The prevalence of chronic cough increased with age and peaked in the eighth decade. In subjects aged <70 years, chronic cough was more common in women. During an average follow-up of 6 years, 439 incident cases of chronic cough occurred with an overall incidence rate of 11.6 per 1000 person-years (95% CI 10.6–12.8). In current smokers, the incidence of chronic cough was higher in men. In the multivariable analysis, current smoking, gastro-oesophageal reflux disease (GORD), asthma and COPD were identified as risk factors for chronic cough.

Chronic cough is common among adults and highly prevalent in the older population. Current smoking, GORD, asthma and COPD are independent risk factors for chronic cough. Individuals at risk of developing chronic cough may benefit from smoking cessation and control of the underlying disease.

Inhaled corticosteroid/long-acting β₂-agonist combination therapy is a recommended treatment option for patients with chronic obstructive pulmonary disease (COPD) and increased exacerbation risk, particularly those with elevated blood eosinophil levels. SOPHOS (NCT02727660) evaluated the efficacy and safety of two doses of budesonide/formoterol fumarate dihydrate metered dose inhaler (BFF MDI) versus formoterol fumarate dihydrate (FF) MDI, each delivered using co-suspension delivery technology, in patients with moderate-to-very severe COPD and a history of exacerbations.

In this phase 3, randomised, double-blind, parallel-group, 12–52-week, variable length study, patients received twice-daily BFF MDI 320/10 µg or 160/10 µg, or FF MDI 10 µg. The primary endpoint was change from baseline in morning pre-dose trough forced expiratory volume in 1 s (FEV₁) at week 12. Secondary and other endpoints included assessments of moderate/severe COPD exacerbations and safety.

The primary analysis (modified intent-to-treat) population included 1843 patients (BFF MDI 320/10 µg, n=619; BFF MDI 160/10 µg, n=617; and FF MDI, n=607). BFF MDI 320/10 µg and 160/10 µg improved morning pre-dose trough FEV₁ at week 12 versus FF MDI (least squares mean differences 34 mL [p=0.0081] and 32 mL [p=0.0134], respectively), increased time to first exacerbation (hazard ratios 0.827 [p=0.0441] and 0.803 [p=0.0198], respectively) and reduced exacerbation rate (rate ratios 0.67 [p=0.0001] and 0.71 [p=0.0010], respectively). Lung function and exacerbation benefits were driven by patients with blood eosinophil counts ≥150 cells·mm^–3. The incidence of adverse events was similar, and pneumonia rates were low (≤2.4%) across treatments.

SOPHOS demonstrated the efficacy and tolerability of BFF MDI 320/10 µg and 160/10 µg in patients with moderate-to-very severe COPD at increased risk of exacerbations.

Background

COPD patients account for a large proportion of lung transplants; lung transplantation survival benefit for COPD patients is not well established.

Background

We aimed to investigate the epidemiological and clinical features, and medical care-seeking process of patients with the 2019 coronavirus disease (COVID-19) in Wuhan, China, to provide useful information to contain COVID-19 in other places with similar outbreaks of the virus.

Background

Positive serology for cytomegalovirus (CMV) has been associated with all-cause mortality risk but its role in COPD mortality is unknown. The objective of the present study was to assess the relationship between CMV serology and COPD mortality.

Electronic cigarettes (e-cigarettes) have been used in many countries for >10 years and in this time, there has been a division of opinions amongst both the general public and health professionals regarding the benefit or harms of e-cigarettes. Prior to the reporting of a new phenomenon known as vaping-associated pulmonary injury (VAPI), public opinion about the relative harm of e-cigarettes were increasing but they were perceived as less harmful than cigarettes by one third of people [1]. The recent cases of severe illness and death attributable to VAPI were first described in September 2019 [2]. VAPI appears to be related to either the addition of cannabis/cannabis derivates or vitamin E acetate [3], and as such has not caused radical swing away from the use of e-cigarettes without cannabis or cannabis derivates.

Eligibility criteria for a biologic treatment for severe asthma include poor disease control despite a full medication plan according to Global Initiative for Asthma steps 4–5 [1]. Adherence to inhaled therapy should be verified as part of that prescription requirement [2]. In fact, it has been demonstrated that poor adherence is a major cause of uncontrolled asthma, regardless of its severity [3]. Furthermore, biologics do not exert a disease-modifying effect [4]; in contrast to allergen immunotherapy, which is able to permanently modulate the way the immune system reacts to allergens beyond the immunotherapy treatment course [5], biologic therapy withdrawal usually leads to asthma relapse [4]. Thus, a low adherence rate to inhaled treatment in patients undergoing biologic therapy raises some issues related to sustainability.

ABSTRACT

Interspecific hybridization can drive evolutionary adaptation to novel environments. The Saccharomycotina clade of budding yeasts includes many hybrid lineages, and hybridization has been proposed as a source for new pathogenic species. Candida orthopsilosis is an emerging opportunistic pathogen for which most clinical isolates are hybrids, each derived from one of at least four independent crosses between the same two parental lineages. To gain insight into the transcriptomic aftermath of hybridization in these pathogens, we analyzed allele-specific gene expression in two independently formed hybrid strains and in a homozygous strain representative of one parental lineage. Our results show that the effect of hybridization on overall gene expression is rather limited, affecting ~4% of the genes studied. However, we identified a larger effect in terms of imbalanced allelic expression, affecting ~9.5% of the heterozygous genes in the hybrids. This effect was larger in the hybrid with more extensive loss of heterozygosity, which may indicate a tendency to avoid loss of heterozygosity in these genes. Consistently, the number of shared genes with allele-specific expression in the two independently formed hybrids was higher than random expectation, suggesting selective retention. Some of the imbalanced genes have functions related to pathogenicity, including zinc transport and superoxide dismutase activities. While it remains unclear whether the observed imbalanced genes play a role in virulence, our results suggest that differences in allele-specific expression may add an additional layer of phenotypic plasticity to traits related to virulence in C. orthopsilosis hybrids.

IMPORTANCE How new pathogens emerge is an important question that remains largely unanswered. Some emerging yeast pathogens are hybrids originated through the crossing of two different species, but how hybridization contributes to higher virulence is unclear. Here, we show that hybrids selectively retain gene regulation plasticity inherited from the two parents and that this plasticity affects genes involved in virulence.

ABSTRACT

The prevailing paradigm in obstetrics has been the sterile womb hypothesis. However, some are asserting that the placenta, intra-amniotic environment, and fetus harbor microbial communities. The objective of this study was to determine whether the fetal and placental tissues of rhesus macaques harbor bacterial communities. Fetal, placental, and uterine wall samples were obtained from cesarean deliveries without labor (~130/166 days gestation). The presence of bacteria in the fetal intestine and placenta was investigated through culture. The bacterial burden and profiles of the placenta, umbilical cord, and fetal brain, heart, liver, and colon were determined through quantitative real-time PCR and DNA sequencing. These data were compared with those of the uterine wall as well as to negative and positive technical controls. Bacterial cultures of fetal and placental tissues yielded only a single colony of Cutibacterium acnes. This bacterium was detected at a low relative abundance (0.02%) in the 16S rRNA gene profile of the villous tree sample from which it was cultured, yet it was also identified in 12/29 background technical controls. The bacterial burden and profiles of fetal and placental tissues did not exceed or differ from those of background technical controls. By contrast, the bacterial burden and profiles of positive controls exceeded and differed from those of background controls. Among the macaque samples, distinct microbial signals were limited to the uterine wall. Therefore, using multiple modes of microbiologic inquiry, there was not consistent evidence of bacterial communities in the fetal and placental tissues of rhesus macaques.

IMPORTANCE Microbial invasion of the amniotic cavity (i.e., intra-amniotic infection) has been causally linked to pregnancy complications, especially preterm birth. Therefore, if the placenta and the fetus are typically populated by low-biomass microbial communities, current understanding of the role of microbes in reproduction and pregnancy outcomes will need to be fundamentally reconsidered. Could these communities be of benefit by competitively excluding potential pathogens or priming the fetal immune system for the microbial bombardment it will experience upon delivery? If so, what properties (e.g., microbial load and community membership) of these microbial communities preclude versus promote intra-amniotic infection? Given the ramifications of the in utero colonization hypothesis, critical evaluation is required. In this study, using multiple modes of microbiologic inquiry (i.e., culture, quantitative real-time PCR [qPCR], and DNA sequencing) and controlling for potential background DNA contamination, we did not find consistent evidence for microbial communities in the placental and fetal tissues of rhesus macaques.

ABSTRACT

Members of family Coronaviridae cause a variety of diseases in birds and mammals. Porcine hemagglutinating encephalomyelitis virus (PHEV), a lesser-researched coronavirus, can infect naive pigs of any age, but clinical disease is observed in pigs ≤4 weeks of age. No commercial PHEV vaccines are available, and neonatal protection from PHEV-associated disease is presumably dependent on lactogenic immunity. Although subclinical PHEV infections are thought to be common, PHEV ecology in commercial swine herds is unknown. To begin to address this gap in knowledge, a serum IgG antibody enzyme-linked immunosorbent assay (ELISA) based on the S1 protein was developed and evaluated on known-status samples and then used to estimate PHEV seroprevalence in U.S. sow herds. Assessment of the diagnostic performance of the PHEV S1 ELISA using serum samples (n = 924) collected from 7-week-old pigs (n = 84; 12 pigs per group) inoculated with PHEV, porcine epidemic diarrhea virus, transmissible gastroenteritis virus, porcine respiratory coronavirus, or porcine deltacoronavirus showed that a sample-to-positive cutoff value of ≥0.6 was both sensitive and specific, i.e., all PHEV-inoculated pigs were seropositive from days postinoculation 10 to 42, and no cross-reactivity was observed in samples from other groups. The PHEV S1 ELISA was then used to estimate PHEV seroprevalence in U.S. sow herds (19 states) using 2,756 serum samples from breeding females (>28 weeks old) on commercial farms (n = 104) with no history of PHEV-associated disease. The overall seroprevalence was 53.35% (confidence interval [CI], ±1.86%) and herd seroprevalence was 96.15% (CI, ±3.70%).

IMPORTANCE There is a paucity of information concerning the ecology of porcine hemagglutinating encephalomyelitis virus (PHEV) in commercial swine herds. This study provided evidence that PHEV infection is endemic and highly prevalent in U.S. swine herds. These results raised questions for future studies regarding the impact of endemic PHEV on swine health and the mechanisms by which this virus circulates in endemically infected populations. Regardless, the availability of the validated PHEV S1 enzyme-linked immunosorbent assay (ELISA) provides the means for swine producers to detect and monitor PHEV infections, confirm prior exposure to the virus, and to evaluate the immune status of breeding herds.

ABSTRACT

The chemical structures of soluble fiber carbohydrates vary from source to source due to numerous possible linkage configurations among monomers. However, it has not been elucidated whether subtle structural variations might impact soluble fiber fermentation by colonic microbiota. In this study, we tested the hypothesis that subtle structural variations in a soluble polysaccharide govern the community structure and metabolic output of fermenting microbiota. We performed in vitro fecal fermentation studies using arabinoxylans (AXs) from different classes of wheat (hard red spring [AX_HRS], hard red winter [AX_HRW], and spring red winter [AX_SRW]) with identical initial microbiota. Carbohydrate analyses revealed that AX_SRW was characterized by a significantly shorter backbone and increased branching compared with those of the hard varieties. Amplicon sequencing demonstrated that fermentation of AX_SRW resulted in a distinct community structure of significantly higher richness and evenness than those of hard-AX-fermenting cultures. AX_SRW favored OTUs within Bacteroides, whereas AX_HRW and AX_HRS favored Prevotella. Accordingly, metabolic output varied between hard and soft varieties; higher propionate production was observed with AX_SRW and higher butyrate and acetate with AX_HRW and AX_HRS. This study showed that subtle changes in the structure of a dietary fiber may strongly influence the composition and function of colonic microbiota, further suggesting that physiological functions of dietary fibers are highly structure dependent. Thus, studies focusing on interactions among dietary fiber, gut microbiota, and health outcomes should better characterize the structures of the carbohydrates employed.

IMPORTANCE Diet, especially with respect to consumption of dietary fibers, is well recognized as one of the most important factors shaping the colonic microbiota composition. Accordingly, many studies have been conducted to explore dietary fiber types that could predictably manipulate the colonic microbiota for improved health. However, the majority of these studies underappreciate the vastness of fiber structures in terms of their microbial utilization and omit detailed carbohydrate structural analysis. In some cases, this causes conflicting results to arise between studies using (theoretically) the same fibers. In this investigation, by performing in vitro fecal fermentation studies using bran arabinoxylans obtained from different classes of wheat, we showed that even subtle changes in the structure of a dietary fiber result in divergent microbial communities and metabolic outputs. This underscores the need for much higher structural resolution in studies investigating interactions of dietary fibers with gut microbiota, both in vitro and in vivo.

Molar element ratio analysis of element concentrations consists of four basic tools that provide substantial insight into the lithogeochemistry (and mineralogy) of rocks under examination. These tools consist of: (1) conserved element ratio analysis; (2) Pearce element ratio analysis; (3) general element ratio analysis; and (4) lithogeochemical mineral mode analysis. Conserved element ratio analysis is useful in creating a chemostratigraphic model for the host rocks to mineral deposits, whereas Pearce element ratio analysis and general element ratio analysis are primarily used to identify mineralogical and metasomatic controls on rock compositions and to investigate and quantify the extent of the material transfers that formed the host rocks and mineralization. Lithogeochemical mineral mode analysis converts element concentrations into mineral concentrations using a matrix-based change-of-basis operation, allowing lithogeochemical data to be interpreted in terms of mineral modes. It can be used to provide proper names to rocks, an important activity for an exploration geologist because of the implications that rock names have on genetic processes and mineral deposit models.

This paper provides a review of the theoretical foundations of each of these four tools and then illustrates how these techniques have been used in a variety of exploration applications to assist in the search for, evaluation and planning of, and the mining of mineral deposits. Examples include the evaluation of total digestion lithogeochemical datasets from mineral deposits hosted by igneous and sedimentary rocks and formed by hydrothermal and igneous processes. In addition, this paper illustrates a more recent geometallurgical application of these methods, whereby the mineral proportions determined by lithogeochemical mineral mode analysis are used to predict rock properties and obtain the ore body knowledge critical for resource evaluation, mine planning, mining and mine remediation.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

This paper focuses on handheld and top-of-hole techniques which have appeared since 2007 or have undergone major improvements, and discusses their benefits, challenges and pitfalls, why we use them and what to expect from them. There is an ongoing need to be innovative with the way we undertake mineral exploration. Recent technological advances that have been applied to successful mineral exploration include on-site or portable instruments, on-site laboratory technologies, various core scanners, and technologies for fluid analysis. Portable or field technologies such as pXRF, pXRD, pNIR-SWIR, µRaman and LIBS aid in obtaining chemical and mineralogical information. Spectral gamma tools, a well-known technology, recently took advantage of improved ground and airborne (drone) instruments, to complement hyperspectral imagery. At mine and exploration sites, top-of-hole sensing technologies, such as Lab-at-Rig® and various core scanners (both spectral- and XRF-based) have become useful tools to analyse metres of core as it is being drilled. Fluid analyses are not as common as analyses of solid materials, but there are advances in such technologies as anodic stripping voltammetry, polarography and ion-exchange electrodes aiming for analysis of commodity or environmentally important elements.

Field-portable geochemical techniques and on-site technologies now offer instant response and flexibility for most exploration tasks. By providing relevant data within minutes, they allow safer field decisions and focus on the most promising finds, while saving valuable resources in sampling grids or drilling. More efficient laboratory analysis programs are supported by sample screening and homogeneity checking on-site. Field analyses are not always as accurate as laboratory ones, but most of the time can be correlated with them, enabling reliable decisions. The level of confidence in field-made decisions needs to be compared between later and less numerous laboratory analyses, and less precise but more abundant and immediate field analyses. It may be demonstrated that, in many cases, the fit–for-purpose nature of the latter allows a better confidence level. Quality compromises associated with field analyses can be reduced by the application of better sample preparation and quality assurance/quality control (QA/QC) procedures. Most of the further development of on-site chemical analysis is expected to be based on its integration with lab methods and on sound QA/QC practice, allowing a precise evaluation of its confidence level and uncertainties. Mineralogical analyses are constrained by our ability to interpret the data in near-real time but offer promising approaches in both surface and drilling exploration campaigns.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

Among the emerging techniques to detect the real footprint of buried ore deposits is isotope tracing. Novel and automated preparation systems such as continuous flow isotope ratio mass spectrometry, off-axis integrated cavity output spectroscopy for isotopic compositions of selected molecules, multi-collector inductively coupled-plasma mass spectrometry (ICP-MS), triple quadrupole ICP-MS, laser ablation ICP-MS, and a multitude of inline preparation systems have facilitated the use of isotopes as tracers in mineral exploration, as costs for isotope analyses have decreased and the time required for the analyses has improved. In addition, the isotope systems being used have expanded beyond the traditional light stable and Pb isotopes to include a multitude of elements that behave differently during processes that promote the mobilization of elements during both primary and secondary dispersion. Isotopes are also being used to understand barren areas that lack a critical process to form an ore deposit and to reveal precise redox mechanisms. The goal is to be able to use isotopes to reflect a definitive process that occurs in association with the deposit and not in barren systems, and then to relate these to something that is easier to measure, namely elemental concentrations. As new generations of exploration and environmental scientists are becoming more comfortable with the application of isotopes to effectively trace processes involved in geoscience, and new technologies for rapid and inexpensive analyses of isotopes are continually being developed, novel applications of isotope tracing are becoming more mainstream.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

There is a pressing need for new exploration tools to target and vector towards mineralization in covered terrains. Groundwater provides a valuable and under-utilized geochemical sampling medium, and represents an important and cost-effective tool to expose covered terrains to systematic exploration. For Au exploration, researchers agree the best hydrogeochemistry pathfinder is dissolved Au itself, with additional potential from other pathfinders (albeit non-unique) such as As, Ag, W and Mo. Despite Au's relatively low solubility, with rigorous field protocols and appropriate analytical methods, explorers can respond to dissolved Au directly with robust parts per trillion (ppt)-level analyses.

Even with ppt-level analyses, a practical implication of Au's low solubility is that a deposit's dissolved Au signature is generally weaker than seen in other more mobile pathfinders, producing a smaller detectable footprint, which must be considered when designing exploration programmes. Using purpose-drilled groundwater sampling bores, explorers can collect groundwater samples at the density required to respond to dissolved Au where existing borehole coverage is otherwise insufficient. In addition to its use at the regional scale, with even tighter sample density, hydrogeochemistry also shows promise at the project scale, allowing the 3D modelling of pathfinder dispersion.

For hydrogeochemistry to be widely adopted for Au exploration, explorers need confidence in ppt-level dissolved Au analyses, and the context to understand their significance. This paper aims to address these topics and provide a straightforward starting point for Au explorers interested in applying hydrogeochemistry by: (i) summarizing examples of regional sampling programmes and more focused case studies to illustrate how covered Au deposits create measurable dissolved Au footprints distinguishable from background; and (ii) sharing examples of dissolved Au analyses that are being integrated into exploration at the regional and project scales.

As seen in the results, the distributions of dissolved Au in the regional- and project-scale programmes show remarkably similar and easy to interpret high-contrast, low-frequency anomalies against relatively low backgrounds. These are desirable attributes of any geochemical pathfinder. When combined with the benefits of hydrogeochemistry v. other geochemical exploration tools (e.g. groundwater can create larger footprints requiring fewer samples to detect, and groundwater can recharge from depth to reflect deeper mineralization), dissolved Au is a powerful pathfinder ideally suited for Au exploration in covered terrains.

While this paper focuses on the use of dissolved Au, additional pathfinders can provide valuable information, including indications of lithological changes, hydrothermal alteration and different styles of mineralization, as well as opportunities to use secondary pathfinders when sample density or local conditions may not result in detectable dissolved Au signatures.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

In the past decade, significant research efforts have been devoted to mineral chemistry studies to assist porphyry exploration. These activities can be divided into two major fields of research: (1) porphyry indicator minerals (PIMs), which are used to identify the presence of, or potential for, porphyry-style mineralization based on the chemistry of magmatic minerals such as zircon, plagioclase and apatite, or resistate hydrothermal minerals such as magnetite; and (2) porphyry vectoring and fertility tools (PVFTs), which use the chemical compositions of hydrothermal minerals such as epidote, chlorite and alunite to predict the likely direction and distance to mineralized centres, and the potential metal endowment of a mineral district. This new generation of exploration tools has been enabled by advances in and increased access to laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), short-wave length infrared (SWIR), visible near-infrared (VNIR) and hyperspectral technologies. PIMs and PVFTs show considerable promise for exploration and are starting to be applied to the diversity of environments that host porphyry and epithermal deposits globally. Industry has consistently supported development of these tools, and in the case of PVFTs encouraged by several successful blind tests where deposit centres have successfully been predicted from distal propylitic settings. Industry adoption is steadily increasing but is restrained by a lack of the necessary analytical equipment and expertise in commercial laboratories, and also by the ongoing reliance on well-established geochemical exploration techniques (e.g. sediment, soil and rock chip sampling) that have aided the discovery of near-surface resources over many decades, but are now proving less effective in the search for deeply buried mineral resources and for those concealed under cover.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

There have been several advances in inductively coupled plasma-mass spectrometer (ICP-MS) analytical technologies in the last decade. Collision/reaction cell ICP-MS and triple quadrupole ICP-MS techniques can produce lower detection limits for select elements that experience interferences with a standard quadrupole (e.g. Se and As). Triple quadrupole ICP-MS, in particular, can eliminate virtually all polyatomic or isobaric interferences for highly accurate measurements of some element isotopes systematics that are of great interest in mineral exploration, namely Pb/Pb. Laser ablation ICP-MS has become more popular as an effective analytical tool to measure mineral grain trace elements, which could assist in vectoring to mineralization or exploration drill targets. The ablation of a spot on a Li-borate fused glass disk paired with XRF analysis has also gained popularity as an alternative to total whole rock characterization packages that employ several separate digestions and analytical methods. While there have been several advancements in ICP-MS technologies in exploration geochemistry, they have not been widely accepted or implemented. This slow adaptation could be due to the extended recession in the mining industry between 2012 and 2017. It is also possible that standard ICP-MS data (i.e. no collision/reaction cell) is still fit for purpose. This stands in stark contrast to implementation of ICP-MS in the previous decade (1997–2007), which was transformational for the industry.

Consideration of all elements from large multi-element ICP-MS analytical suites for mineral exploration can be an extremely powerful tool in the exploration toolkit. The discovery of the White Gold District, Yukon, is a prime example of how the utilization of soil geochemical data, when plotted spatially, can vector to gold mineralization. The presence of Au + As + Sb soil anomalies were key to delineating mineralization, especially when accompanied by publicly available geological, geographical and geophysical data. Additionally, elements and element ratios not typically considered in Au exploration, including Ni and U, were utilized to determine the lithological and structural controls on mineralization. The availability of multi-element ICP-MS data was also useful in the discovery of the Cascadero Copper Taron Caesium deposit. Ore-grade Cs was discovered only because Cs was included in the multi-element ICP-MS exploration geochemistry suite. Before the availability of ICP-MS, it is unlikely that this deposit would have been discovered.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

Mineral exploration under relatively young, exotic cover still presents a major challenge to discovery. Advances and future developments can be categorized in four key areas, (1) understanding metal mobility and mechanisms, (2) rapid geochemical analyses, (3) data access, integration and interoperability and (4) innovation in laboratory-based methods.

Application of ‘regolith-style' surface mapping in covered terrains outside of conventional lateritic terrains is achieving success in terms of reducing background noise and improving geochemical contrasts. However, process models for anomaly generation are still uncertain and require further research. The interaction between the surface environment, microbes, hydrocarbons and chemistry is receiving greater attention. While significant progress has been achieved in understanding the role of vegetation, interaction with the water table and cycling of metals in the near surface environment in Australia, other regions of the world, for example, the till-covered terrains in the northern hemisphere and arid colluvium-covered areas of South America, have seen less progress. In addition to vegetation, the influence of bacteria, fungi and invertebrates is not as well studied with respect to metal mobilization in cover. Field portable XRF has become a standard field technique, though more often used in a camp setting. Apart from a tweaking of analytical quality, instruments have probably reached their peak of analytical development with add-ons, such as cameras, beam-limiters, wireless transmission and GPS as the main differences between instrument suppliers. Their future rests in automated application in unconventional configurations, for example, core scanning and better integration of analytical data with other information such as spectral analyses. Pattern drilling that persists in industry, however, has benefited from innovative application of field-portable tools along with rock and mineral chemistry to provide near real-time results and assist in a shift toward more flexible and targeted drilling in greenfields settings.

Innovation in the laboratory continues to progress. More selective geochemical analysis, imaging of fine particle size fractions and resistate mineral phases and isotope analysis are faster and more accessible than ever before. The application of genomics (and data analysis) as mineral exploration tools is on the horizon. A continuing problem in geoscience, the supply to industry of suitably trained geochemists, persists although some needs, particularly at junior level, will be met by recent initiatives at various universities at graduate level. Unfortunately, the current economic climate has had a significant impact on R&D and retention of geochemistry skills by the industry. Whilst the future is positive, significant investment is required to develop the next generation of geochemical exploration tools and concepts.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

It is important to identify, assess, and address current barriers to implementation of post-approval changes that are intended to ensure continued (uninterrupted) operations and drive innovation and continual improvement in a maximally efficient, agile, and flexible pharmaceutical manufacturing sector. Leveraging the International Conference for Harmonisation Quality Guideline Q10 provides regulatory relief when it comes to addressing changes related to excipients, specifically excipient supplier's name and address changes, which will ensure a sustainable, reliable global supply and the availability of high quality product to patients through the entire commercial lifecycle of a product without extensive regulatory oversight.

Extractables and leachables (E&L) are identified and quantified so that their impact on patient safety can be established and assessed. The uncertainty in the impact assessment is affected by the uncertainty in the substance's experimentally determined identity and concentration. Thus, these experimentally determined quantities must be reported not only in terms of their absolute result but also in terms of the uncertainty in the result, which is based on the amount and rigor of the information on which the result is based. In this way, the impact assessment can be tempered to account for the uncertainty in its input data. To facilitate the assignment and reporting of uncertainty, classification hierarchies are proposed and discussed for both identification and quantitation. Both hierarchies establish levels or degrees of identification and quantitation based on the uncertainty of the result and contain descriptions of the quality and quantity of information required to achieve a certain level within the hierarchy. The minimal levels that must be achieved to support impact assessment are also established.

The bioprocessing industry uses recombinant mammalian cell lines to generate therapeutic biologic drugs. To ensure consistent product quality of the therapeutic proteins, it is imperative to have a controlled production process. Regulatory agencies and the biotechnology industry consider cell line "clonal origin" an important aspect of maintaining process control. Demonstration of clonal origin of the cell substrate, or production cell line, has received considerable attention in the past few years, and the industry has improved methods and devised standards to increase the probability and/or assurance of clonal derivation. However, older production cell lines developed before the implementation of these methods, herein referred to as "legacy cell lines," may not meet current regulatory expectations for demonstration of clonal derivation. In this article, the members of the IQ Consortium Working Group on Clonality present our position that the demonstration of process consistency and product comparability of critical quality attributes throughout the development life cycle should be sufficient to approve a license application without additional genetic analysis to support clonal origin, even for legacy cell lines that may not meet current day clonal derivation standards. With this commentary, we discuss advantages and limitations of genetic testing methods to support clonal derivation of legacy cell lines and wish to promote a mutual understanding with the regulatory authorities regarding their optional use during early drug development, subsequent to Investigational New Drug (IND) application and before demonstration of product and process consistency at Biologics License Applications (BLA) submission.

For manufacturers of both sterile and nonsterile pharmaceuticals, there is an expectation that the manufacturing process is performed in a manner that prevents extraneous contamination so that the products are provided in a safe, integral, pure, and unadulterated form. As part of that process, cleaning and disinfection are an absolute necessity. Although cleaning and disinfection support control of microbial contamination through preventive and corrective action, specific compendia methods do not currently exist. The intent of this paper is to provide a general guidance on how to perform disinfectant efficacy validation and implementation. This includes how to make sure the concepts are understood, how to interpret facility data and utilize it to demonstrate control awareness for your facilities, and how to leverage the data to reduce redundancies in validation or verification. This paper represents the thoughts and best practices of the authoring team and their respective companies and provides an efficient way to qualify disinfectants without impacting the quality of the study. If you choose to follow the recommendations in this paper, you must ensure that the appropriate rationale is sound and the scientific data is documented. It is the belief of the authoring team that only then will this approach meet regulatory requirements.

Technologies allowing genetic sequencing of the human microbiome are opening new realms to discovery. The host microbiota substantially impacts immune responses both in immune-mediated inflammatory diseases (IMIDs) and in tumors affecting tissues beyond skin and mucosae. However, a mechanistic link between host microbiota and cancer or IMIDs has not been well established. Here, we propose T helper 17 (T_H17) lymphocytes as the connecting factor between host microbiota and rheumatoid or psoriatic arthritides, multiple sclerosis, breast or ovarian cancer, and multiple myeloma. We theorize that similar mechanisms favor the expansion of gut-borne T_H17 cells and their deployment at the site of inflammation in extraborder IMIDs and tumors, where T_H17 cells are driving forces. Thus, from a pathogenic standpoint, tumors may share mechanistic routes with IMIDs. A review of similarities and divergences in microbiota-T_H17 cell interactions in IMIDs and cancer sheds light on previously ignored pathways in either one of the two groups of pathologies and identifies novel therapeutic avenues.

Viruses and mobile genetic elements are molecular parasites or symbionts that coevolve with nearly all forms of cellular life. The route of virus replication and protein expression is determined by the viral genome type. Comparison of these routes led to the classification of viruses into seven "Baltimore classes" (BCs) that define the major features of virus reproduction. However, recent phylogenomic studies identified multiple evolutionary connections among viruses within each of the BCs as well as between different classes. Due to the modular organization of virus genomes, these relationships defy simple representation as lines of descent but rather form complex networks. Phylogenetic analyses of virus hallmark genes combined with analyses of gene-sharing networks show that replication modules of five BCs (three classes of RNA viruses and two classes of reverse-transcribing viruses) evolved from a common ancestor that encoded an RNA-directed RNA polymerase or a reverse transcriptase. Bona fide viruses evolved from this ancestor on multiple, independent occasions via the recruitment of distinct cellular proteins as capsid subunits and other structural components of virions. The single-stranded DNA (ssDNA) viruses are a polyphyletic class, with different groups evolving by recombination between rolling-circle-replicating plasmids, which contributed the replication protein, and positive-sense RNA viruses, which contributed the capsid protein. The double-stranded DNA (dsDNA) viruses are distributed among several large monophyletic groups and arose via the combination of distinct structural modules with equally diverse replication modules. Phylogenomic analyses reveal the finer structure of evolutionary connections among RNA viruses and reverse-transcribing viruses, ssDNA viruses, and large subsets of dsDNA viruses. Taken together, these analyses allow us to outline the global organization of the virus world. Here, we describe the key aspects of this organization and propose a comprehensive hierarchical taxonomy of viruses.

Although enteroviruses are associated with a wide variety of diseases and conditions, their mode of replication is well conserved. Their genome is carried as a single, positive-sense RNA strand. At the 5' end of the strand is an approximately 90-nucleotide self-complementary region called the 5' cloverleaf, or the oriL. This noncoding region serves as a platform upon which host and virus proteins, including the 3B, 3C, and 3D virus proteins, assemble in order to initiate replication of a negative-sense RNA strand. The negative strand in turn serves as a template for synthesis of multiple positive-sense RNA strands. Building on structural studies of individual RNA stem-loops, the structure of the intact 5' cloverleaf from rhinovirus has recently been determined via nuclear magnetic resonance/small-angle X-ray scattering (NMR/SAXS)-based methods, while structures have also been determined for enterovirus 3A, 3B, 3C, and 3D proteins. Analysis of these structures, together with structural and modeling studies of interactions between host and virus proteins and RNA, has begun to provide insight into the enterovirus replication mechanism and the potential to inhibit replication by blocking these interactions.

In bacterial populations, quorum sensing (QS) systems participate in the regulation of specialization processes and regulate collective behaviors that mediate interactions and allow survival of the species. In Gram-positive bacteria, QS systems of the RRNPP family (Rgg, Rap, NprR, PlcR, and PrgX) consist of intracellular receptors and their cognate signaling peptides. Two of these receptors, Rap and NprR, have regained attention in Bacillus subtilis and the Bacillus cereus group. Some Rap proteins, such as RapH and Rap60, are multifunctional and/or redundant in function, linking the specialization processes of sporulation and competence, as well as global expression changes in the transition phase in B. subtilis. NprR, an evolutionary intermediate between Rap and RRNPP transcriptional activators, is a bifunctional regulator that modulates sporulation initiation and activates nutrient scavenging genes. In this review, we discuss how these receptors switch between functions and connect distinct signaling pathways. Based on structural evidence, we propose that RapH and Rap60 should be considered moonlighting proteins. Additionally, we analyze an evolutionary and ecological perspective to understand the multifunctionality and functional redundancy of these regulators in both Bacillus spp. and non-Bacillus Firmicutes. Understanding the mechanistic, structural, ecological, and evolutionary basis for the multifunctionality and redundancy of these QS systems is a key step for achieving the development of innovative technologies for health and agriculture.

The capacity of Listeria monocytogenes to adapt to environmental changes is facilitated by a large number of regulatory proteins encoded by its genome. Among these proteins are the uncharacterized LysR-type transcriptional regulators (LTTRs). LTTRs can work as positive and/or negative transcription regulators at both local and global genetic levels. Previously, our group determined by comparative genome analysis that one member of the LTTRs (NCBI accession no. WP_003734782) was present in pathogenic strains but absent from nonpathogenic strains. The goal of the present study was to assess the importance of this transcription factor in the virulence of L. monocytogenes strain F2365 and to identify its regulons. An L. monocytogenes strain lacking lysR (the F2365lysR strain) displayed significant reductions in cell invasion of and adhesion to Caco-2 cells. In plaque assays, the deletion of lysR resulted in a 42.86% decrease in plaque number and a 13.48% decrease in average plaque size. Furthermore, the deletion of lysR also attenuated the virulence of L. monocytogenes in mice following oral and intraperitoneal inoculation. The analysis of transcriptomics revealed that the transcript levels of 139 genes were upregulated, while 113 genes were downregulated in the F2365lysR strain compared to levels in the wild-type bacteria. lysR-repressed genes included ABC transporters, important for starch and sucrose metabolism as well as glycerolipid metabolism, flagellar assembly, quorum sensing, and glycolysis/gluconeogenesis. Conversely, lysR activated the expression of genes related to fructose and mannose metabolism, cationic antimicrobial peptide (CAMP) resistance, and beta-lactam resistance. These data suggested that lysR contributed to L. monocytogenes virulence by broad impact on multiple pathways of gene expression.

IMPORTANCE Listeria monocytogenes is the causative agent of listeriosis, an infectious and fatal disease of animals and humans. In this study, we have shown that lysR contributes to Listeria pathogenesis and replication in cell lines. We also highlight the importance of lysR in regulating the transcription of genes involved in different pathways that might be essential for the growth and persistence of L. monocytogenes in the host or under nutrient limitation. Better understanding L. monocytogenes pathogenesis and the role of various virulence factors is necessary for further development of prevention and control strategies.

Shigella species, the causal agents of bacillary dysentery, use a type III secretion system (T3SS) to inject two waves of virulence proteins, known as effectors, into the colonic epithelium to subvert host cell machinery. Prior to host cell contact and secretion of the first wave of T3SS effectors, OspD1, an effector and antiactivator protein, prevents premature production of the second wave of effectors. Despite this important role, regulation of the ospD1 gene is not well understood. While ospD1 belongs to the large regulon of VirB, a transcriptional antisilencing protein that counters silencing mediated by the histone-like nucleoid structuring protein H-NS, it remains unclear if VirB directly or indirectly regulates ospD1. Additionally, it is not known if ospD1 is regulated by H-NS. Here, we identify the primary ospD1 transcription start site (+1) and show that the ospD1 promoter is remotely regulated by both VirB and H-NS. Our findings demonstrate that VirB regulation of ospD1 requires at least one of the two newly identified VirB regulatory sites, centered at –978 and –1270 relative to the ospD1 +1. Intriguingly, one of these sites lies on a 193-bp sequence found in three conserved locations on the large virulence plasmids of Shigella. The region required for H-NS-dependent silencing of ospD1 lies between –1120 and –820 relative to the ospD1 +1. Thus, our study provides further evidence that cis-acting regulatory sequences for transcriptional antisilencers and silencers, such as VirB and H-NS, can lie far upstream of the canonical bacterial promoter region (i.e., –250 to +1).

IMPORTANCE Transcriptional silencing and antisilencing mechanisms regulate virulence gene expression in many important bacterial pathogens. In Shigella species, plasmid-borne virulence genes, such as those encoding the type III secretion system (T3SS), are silenced by the histone-like nucleoid structuring protein H-NS and antisilenced by VirB. Previous work at the plasmid-borne icsP locus revealed that VirB binds to a remotely located cis-acting regulatory site to relieve transcriptional silencing mediated by H-NS. Here, we characterize a second example of remote VirB antisilencing at ospD1, which encodes a T3SS antiactivator and effector. Our study highlights that remote transcriptional silencing and antisilencing occur more frequently in Shigella than previously thought, and it raises the possibility that long-range transcriptional regulation in bacteria is commonplace.

Chitotriosidase (CHIT1) is a highly conserved and regulated chitinase secreted by activated macrophages; it is a member of the 18-glycosylase family (GH18). CHIT1 is the most prominent chitinase in humans, can cleave chitin and participates in the body's immune response and is associated with inflammation, infection, tissue damage and remodelling processes. Recently, CHIT1 has been reported to be involved in the molecular pathogenesis of pulmonary fibrosis, bronchial asthma, COPD and pulmonary infections, shedding new light on the role of these proteins in lung pathophysiology. The potential roles of CHIT1 in lung diseases are reviewed in this article.

Background

People with pulmonary fibrosis often experience a protracted time to diagnosis, high symptom burden and limited disease information. This review aimed to identify the supportive care needs reported by people with pulmonary fibrosis and their caregivers.

Calcareous nannofossils are a group of micrometric fossils abundantly found in marine sediments. This group is mainly composed of coccoliths, platelets produced by the unicellular algae coccolithophores, and nannoliths whose biological affinity remains unknown. Calcareous nannofossils have a continuous record for the past 215 myr (Bown 1998) and can be found in almost every marine environment from coast to open oceans and from the Equator to the poles in surface waters (Winter et al. 1994). These microfossils are also made of low-Mg calcite (Siesser 1977; Stoll et al. 2001) which is resistant to dissolution and a common matrix for geochemical analyses in palaeoceanography. Hence, calcareous nannofossils could be one of the best fossils for palaeoceanographical studies for the last 215 myr. Their use in geochemistry is, however, less common than planktic foraminifera due to their small sizes, masses (10–1000 pg) and complex vital effects. Despite the fact that nannofossils are very small (2–20 µm), the development of high-resolution analytical devices opens up the opportunity to analyse single nannofossils or even parts of them. This is a growing field of nannofossil research.

Despite the importance of the Bering Sea for subarctic oceanography and climate, relatively little is known of the foraminifera from the extensive Aleutian Basin. We report the occurrence of modern deep-water agglutinated foraminifera collected at seven sites cored during Integrated Ocean Drilling Program (IODP) Expedition 323 in the Bering Sea. Assemblages collected from core-top samples contained 32 genera and 50 species and are described and illustrated here for the first time. Commonly occurring species include typical deep-water Rhizammina, Reophax, Rhabdammina, Recurvoides and Nodulina. Assemblages from the northern sites also consist of accessory Cyclammina, Eggerelloides and Glaphyrammina, whilst those of the Bowers Ridge sites consist of other tubular genera and Martinottiella. Of the studied stations with the lowest dissolved oxygen concentrations, the potentially Bering Sea endemic Eggerelloides sp. 1 inhabits the northern slope, which has the highest primary productivity, and the potentially endemic Martinottiella sp. 3 inhabits Bowers Ridge, which has the lowest oxygen concentrations but relatively low annual productivity. Martinottiella sp. 3, with open pores on its test surface, has previously been reported in Pliocene to Recent material from Bowers Ridge. Despite relatively small sample sizes, ecological constraints may imply that the Bering Sea experienced high productivity and reduced oxygen at times since at least the Pliocene. We note the partially endemic nature of the agglutinated foraminiferal assemblages, which may at least in part be due to basin restriction, the geologically long time period of reduced oxygen, and high organic carbon flux. Our results indicate the importance of gathering further surface sample data from the Aleutian Basin.

The Henry Buckley Collection of Planktonic Foraminifera at the Natural History Museum in London (NHMUK) consists of 1665 single-taxon slides housing 23 897 individuals from 203 sites in all the major ocean basins, as well as a vast research library of Scanning Electron Microscope (SEM) photomicrographs. Buckley picked the material from the NHMUK Ocean-Bottom Deposit Collection and also from fresh tow samples. However, his collection remains largely unused as he was discouraged by his managers in the Mineralogy Department from working on or publicizing the collection. Nevertheless, Buckley published pioneering papers on isotopic interpretation of oceanographic and climatic change and was one of the first workers to investigate foraminiferal wall structure using the SEM technique. Details of the collection and images of each slide are available via the NHMUK Data Portal (http://dx.doi.org/10.5519/0035055). The Buckley Collection and its associated Ocean-Bottom Deposit Collection have great potential for taxon-specific studies as well as geochemical work, and both collections are available on request.

New scanning electron microscope observations of unadulterated calcareous nannofossil assemblages on lamina surfaces of Cretaceous Tanzania Drilling Project sediments reveal high diversity in the <3 µm size-range and high abundances of small and frangible morphologies. These assemblages prompt comparison to modern assemblages, which show similar high diversity and abundance of very small and fragile taxa, although these assemblages are generally not preserved in the fossil record due to taphonomic filtering. Not only are there broad similarities between the general composition of modern assemblages and those of the Tanzanian lagerstätte, but also our discovery of several new Cretaceous taxa provides evidence for greatly extended fossil lineages of extant orders, with implications for both deep-time biodiversity divergence and survival through the end-Cretaceous mass extinction. Our findings include: new species that are the first-recorded Mesozoic representatives of the extant Syracosphaeraceae and Papposphaeraceae; potentially previously unrecorded diversity in the Mesozoic Calciosoleniaceae, another extant order, represented by extant species that have been described already; and new species and unusually high abundances of the Mesozoic Stephanolithiaceae. We also highlight the extended range of an incertae sedis Cenozoic genus, Ellipsolithus, into at least the Turonian.

Here, we describe seven new miniscule to very small Cretaceous species: Syracosphaera antiqua, S. repagula, Pocillithus macleodii, P. crucifer, Stradnerlithus wendleri, S.? haynesiae and Tortolithus foramen.

Assemblages of upper lower through upper Miocene Discoaster spp. have been quantified from Integrated Ocean Drilling Program (IODP) Site U1338 in the eastern equatorial Pacific Ocean. These assemblages can be grouped into five broad morphological categories: six-rayed with bifurcated ray tips, six-rayed with large central areas, six-rayed with pointed ray tips, five-rayed with bifurcated ray tips and five-rayed with pointed ray tips. Discoaster deflandrei dominates the assemblages prior to 15.8 Ma. The decline in abundance of D. deflandrei close to the early–middle Miocene boundary occurs together with the evolution of the D. variabilis group, including D. signus and D. exilis. Six-rayed discoasters having large central areas become a prominent member of the assemblages for a 400 ka interval in the late middle Miocene. Five- and six-rayed forms having pointed tips become prominent in the early late Miocene and show a strong antiphasing relationship with the D. variabilis group. Discoaster bellus completely dominates the Discoaster assemblages for a 400 ka interval in the middle late Miocene. Abundances of all discoasters, or discoasters at the species level, show only (surprisingly) weak correlations to carbonate contents or oxygen and carbon isotopes of bulk sediment when calculated over the entire sample interval.

ABSTRACTBackground:Some opportunities to routinely capture and improve respectful maternity care (RMC) during facility-based childbirth include quality improvement (QI) initiatives, community-based monitoring efforts through community score cards (CSC), and performance-based financing (PBF) initiatives. But there is limited guidance on which types of RMC indicators are best suited for inclusion in these initiatives. We sought to provide practical evidence-based recommendations on indicators that may be used for routine measurement of RMC in programs.Methods:We used a rapid review approach, which included (1) reviewing existing documents and publications to extract RMC indicators and identify which have or can be used in facility-based QI, CSCs, and PBF schemes; (2) surveying RMC and maternal health experts to rank indicators, and (3) analyzing survey data to select the most recommended indicators.Results:We identified 49 indicators spanning several domains of RMC and mistreatment including dignified/nondignified care, verbal and physical abuse, privacy/confidentiality, autonomy/loss of autonomy, supportive care/lack thereof, communication, stigma, discrimination, trust, facility environment/culture, responsiveness, and nonevidence-based care. Based on the analysis of the survey data, we recommend 33 indicators (between 2 and 6 indicators for each RMC domain) that may be suited for incorporation in both facility-based QI and CSC-related monitoring efforts.Conclusion:Integrating RMC indicators into QI and CSC initiatives, as well as in other maternal and neonatal health programs, could help improve RMC at the facility and community level. More research is needed into whether RMC can be integrated into PBF initiatives. Integration of RMC indicators into programs to improve quality of care and other health system outcomes will facilitate routine monitoring and accountability around experience of care. Measurement and improvement of women's experiences will increase maternal health service utilization and improve quality of care as a means of reducing maternal and neonatal morbidity and mortality.