Hi all,

I have off grid violations on M2 layer. I have tried ecoRoute -fix_drc and deleting violations and rerouting. But the tool is still placing these routes off grid. The on grid option in nanoroute is turned on. Since there is a fat metal closer to these routes, the tool is honouring the drc and not placing the metals on track. How do I ignore drc while routing? Also if there is any other way I can fix it, please let me know 

I have a standard cell library containing LEF, GDS, and spice models but no OA views. I'm unable to import these files into Virtuoso without a LayerMap file. How can I obtain or generate this required LayerMap file?

Hi all, 

I have made a custom cell in Innovus that I will be instantiating into a bigger block, which I will also be using Innovus to do the Place & Route. 

I understand that I can generate a *.lef file and a *.lib file using Innovus. However, I need to also create a *.db file (these format of files are often used in DC Compiler synthesis tool). 

Is there a way to create the *.db file from Innovus? Or, is there a tool that I can use to create this *.db file? 

Thank you for your time. 

I'm trying to write a generic piece of code that will return the layermap file location, with file name, for a variety of projects (which could potential have different layermap file naming conventions. The below code is what I've used to date, but this assumes the file name is xxxx.layermap. I can obviously do some string matching to find it, assuming the various files all contain some common characters. I thought I'd ask if there is a simpler way to find it, I know that this information is automatically loaded into the Xstream out gui, so maybe I can use the same approach to find it.

techLibName=techGetTechFile(cv)~>libName

techLibLayerMap=strcat(ddGetObj(techLibName)~>readPath "/" techLibName ".layermap")

Hi everyone. 

I'm very a new cadence user. I'm not good at using it and quite lost in finding a way to get the results. With the topic, I would like to ask you for some suggestions to improve my cadence skills.

I have some digital decision logic. Some are combinational logic, some are sequential logic that I would like to import or generate random input combination to the inputs of my decision logic to get the maximum, minimum, and average delay power dissipation and area when feeding the different input combination.

My logic has 8-bit, 16-bit, and 32-bit input. The imported data tends to be decimal numbers.

I would like to ask you:

- which tool(s) are the most appropriate to import and feed the different combination to my decision logic?

- which tool is the most appropriate to synthesis with different number of input? - I have used Genus Synthesis Solution so far. However with my skill right now I can only let Genus synthesize my Verilog code one setup at a time. I'm not sure if I there is anyway I can feed a lot of input at a time and get those results (min, max, average of delay, power dissipation and area)

- which language or scripts I should pick up to use and achieve these results?

-where can I find information to solve my problem? which information shall I look for?

Thank you so much for your time!!

Best Regards

I have a 2-dimensional input in my design - input [2:0] data_in [15:0]. After synthesis with genus, I got a netlist where the inputs are like data[15], data[14],...,data[0]. And furthermore it has definitions like input [2:0] data[15], .... So how can I define the pin locations of each of the bits for this input? Can I define data[15]'s inner bits like data[15][0]? Is it possible to define this with def files?

Hello All,

How do we control the Always on buffering for a power domain called B in Power domain A.

here B-power domain nets going through A , hence tool is inserting Always on buffers.

How do we avoid this specific power domain ?

Thanks,
Bshaik

Hi! I've made some 1-point waveform "markers" that I want to overlay in my plots to aid visualization (with the added advantage, w.r.t. normal Viva markers, that they update location automatically upon refreshing simulation data).

For example, the plot below shows an spectrum along with two of these markers, which I create with the function "singlePointWave", and the Assembler output definitions also as shown below.

The problem is: as currently created and defined, Assembler is unable to plot these elements. I can send their expressions to the calculator and plotting works from there, BUT ONLY after first enabling the "Allow Any Units" in the target Viva subwindow.

Thus, I suspect Assembler is failing to plot my markers because they "lack" other information like axes units and so on. How could I add whatever is missing, so that these markers can plot automatically from Assembler?

Thanks in advance for any help!

Jorge.

P.S. I also don't know why, but nothing works without those "ymax()" in the output definitions--I suspect they are somehow converting the arguments to the right data type expected by singlePointWave(). Ideas how to fix that are also welcome! ^^

procedure( singlePointWave(xVal yVal)
    let( (xVect yVect wave)
        xVect = drCreateVec('double list(xVal));
        yVect = drCreateVec('double list(yVal));
        wave = drCreateWaveform(xVect yVect);
    );
);

I am trying to install IC231 on RHEL 8 using installscape, however configuring keeps failing.

I tried to run the configuration file manually as suggested in one of the previous posts and it gives me following errors:

sh batch_configure.sh
/home/rs/cadence/installs/IC231/install/tmp/slconfig.sh: line 165: xterm: command not found
cat: ncvhdl23.03-d103lnx86_101124125631.stat: No such file or directory
rm: cannot remove 'ncvhdl23.03-d103lnx86_101124125631.stat': No such file or directory
/home/rs/cadence/installs/IC231/install/tmp/slconfig.sh: line 165: xterm: command not found
cat: ncvhdl64b23.03-d103lnx86_101124125631.stat: No such file or directory
rm: cannot remove 'ncvhdl64b23.03-d103lnx86_101124125631.stat': No such file or directory
/home/rs/cadence/installs/IC231/install/tmp/slconfig.sh: line 165: xterm: command not found
cat: oaRedist22.61-p003lnx86_101124125631.stat: No such file or directory
rm: cannot remove 'oaRedist22.61-p003lnx86_101124125631.stat': No such file or directory
/home/rs/cadence/installs/IC231/install/tmp/slconfig.sh: line 165: xterm: command not found
cat: amsEnv64b23.10-p043lnx86_101124125631.stat: No such file or directory
rm: cannot remove 'amsEnv64b23.10-p043lnx86_101124125631.stat': No such file or directory
/home/rs/cadence/installs/IC231/install/tmp/slconfig.sh: line 165: xterm: command not found
cat: ihdl64b23.10-p043lnx86_101124125631.stat: No such file or directory
rm: cannot remove 'ihdl64b23.10-p043lnx86_101124125631.stat': No such file or directory

I am not very well versed with Linux at the moment but trying. Could any one suggest something or point to what is missing?

Hi,

I am looking to perform a net trace in a CDL file.

There is a net at a lower level and would like to know the net it is connected to at the top level.

Please let me know if there is a way to analyze the CDL file to perform this net trace.

Thanks,

Mallikarjun.

I want to create sub tree of sub trees how can i do that?

I want to create another tree for the Sub parameter also.

Is there a skill command for "Assign Layout Instance terminals", this form appears when i click on define device correspondence and Bind the devices.

Also,

Problem Statement : i have a schematic with a couple of transistor symbols and and i alos have a corresponding layout view with respective layout transistors but they all are inside a pCell(created by me) i.e layout transistor called inside a custom Pcell. Now i have multiple symbols in schematic view and a single instance(pCell) in layout view. 
Is there a way how i can bind these schematic symbols with layout symbols inside the pCell(custom)? Even if i have to use cph commands i'm fine with it. need help here.

The idea here is to establish XL connectivity between the schematic symbols and corresponding layout transistors(inside the pCell).

Thanks,

Shankar

Hello Community,

Is there any simple way how i can get the coordinates of all the shapes in a layout view?

Currently i'm flattening the layout, getting all the lpps from CV and using setof to get all the shapes of a layer and looping through them to get the coordinates.

Is there a way to do it without having to flatten the layout view and shapes merged or any other elegant way to do it if we flatten it?

Also, dbWriteSkill doesn't give output how i desired

Thanks,

Shankar

Hello,

When I draw a Fluid Guard Ring in Virtuoso, the layout is not visible, and instead, "do_something=nil" appears.

When I check the details with Q, it shows the same information as a regular NFGR guard ring, and Ctrl+F also displays the instance name, just like with a regular NFGR. 

Additionally, the Pcells of Fluid Guard Rings from previous projects appear broken. 

The version I’m currently using is not different from the one used in the past. Even when I access the same version as the one used during the project, the Pcells still appear broken.

These two issues are occurring, and I’m not sure what to check. I would greatly appreciate it if you could assist me in resolving this issue.

//

Hi,

My query is regarding importing of layout.

After importing, we see that the imported transistor instances and vias are all referring to the library in which they are imported, instead of referring to the technology library.

Please let me know how we can refer them to the technology library.

Will surely provide more details if my query is unclear.

Thanks,

Mallikarjun.

Hello Community,

I have encountered an issue that is a mystery to me and hope somebody could give me a clue about what is happening in Cadence and maybe even a solution?

I am running a test scripted in a SKILL file that sequentially opens two different projects with MC analyses and in between I get an error message box and also multiple logs in CIW with exactly the same text.

Both projects run a simulation with a call like this:

historyName = maeRunSimulation(?session sessionName ?waitUntilDone t)

After this the script closes the current project, opens the next project and executes the same line with maeRunSimulation() for the second project. Then immediately this error message happens, and also is logged repeatedly in the CIW window

The message box looks like this:

The logs I get in CIW:

nil
hiCancelProgressBox(_axlNetlistCreateProgressBar)
nil
hiCancelProgressBox(_axlUILoadForm)
nil
when(dwindow('axlDataViewessWindow1) hiMapWindow(dwindow('axlDataViewessWindow1)))
t
when(dwindow('axlRunSummaryessWindow1) hiMapWindow(dwindow('axlRunSummaryessWindow1)))
t
ERROR (ASSEMBLER-1600): Cannot find an active session named fnxSession0.
You can only modify an ADE Assembler session that is active.
Perhaps the session name was misspelled or has not yet been created.
Verify the session name matches an existing ADE Assembler session.

1>
ERROR (ASSEMBLER-1600): Cannot find an active session named fnxSession0.
You can only modify an ADE Assembler session that is active.
Perhaps the session name was misspelled or has not yet been created.
Verify the session name matches an existing ADE Assembler session.

*WARNING* hiDisplayAppDBox: modal dbox 'adexlMessageDialog' is already displayed!
ERROR (ASSEMBLER-1600): Cannot find an active session named fnxSession0.
You can only modify an ADE Assembler session that is active.
Perhaps the session name was misspelled or has not yet been created.
Verify the session name matches an existing ADE Assembler session.

*WARNING* hiDisplayAppDBox: modal dbox 'adexlMessageDialog' is already displayed!
ERROR (ASSEMBLER-1600): Cannot find an active session named fnxSession0.
You can only modify an ADE Assembler session that is active.
Perhaps the session name was misspelled or has not yet been created.
Verify the session name matches an existing ADE Assembler session.

Hi Team,

I am using the following command in my SKILL script to flatten the hierarchical layouts, it's working fine for all the instances and mosaics but not for techLib via's please help me with the command to use for flattening the techLib via.

dbFlattenInst( inst 2 nil)

dbFlattenInst( inst1 2 t t nil nil t t)

Regards,

MT.

Hi,

I want to define a procedure that with @key, and I also want to restrict the variable's datatype, I tried with folloing but I received error in CIW

procedure(tt(handler @key str1 str2 "ssS")
  printf("handler: %L " handler)
)

tt('test)

The error is like: *Error* tt: argument for keyword ?str1 should be a symbol (type template = "ssS") at line 11 of file

Thanks,

James

Hello,

I was looking to destructively and efficiently modify a list that was passed in as an argument to a procedure, by prepending an item to the list.

I noticed that cons lets you do this efficiently, but the operation is non-destructive. Hence this wouldn't work if you are trying to modify a function's list parameter in place.

Here is an example of trying to add "0" to the front of a list:

When starting a new design, it's important to take the time to consider design recommendations that prevent problems that can arise later in the design cycle. This two-part compilation of guidelines for starting a new design is the result of years of Cadence AWR Design Environment platform Support experience with designs. Pre-design decisions for user interface, simulation, layout, and library configuration lay the groundwork for a successful and efficient AWR design. This blog covers the user interface (UI) and simulation considerations designers should note prior to starting a design.(read more)

Thermal analysis with the Cadence Celsius Thermal Solver integrated within the AWR Microwave Office circuit simulator gives designers an understanding of device operating temperatures related to power dissipation. That temperature information can be introduced into an electrothermal model to predict the impact on RF performance.(read more)

Cadence AWR Design Environment Software Featured in Multiple Training Course Options: Live and Virtual Starting in October(read more)

The Cadence AWR Design Environment V22.1 production release is now available for download at Cadence Downloads with design environment, AWR Microwave Office, AWR VSS, AWR Analyst, and other enhancements.(read more)

When starting a new design, it's important to take the time to consider design recommendations that prevent problems that can arise later in the design cycle. This two-part compilation of guidelines for starting a new design is the result of years of Cadence AWR Design Environment platform Support experience with designs. Pre-design decisions for user interface, simulation, layout, and library configuration lay the groundwork for a successful and efficient AWR design. This blog, part 2, covers the layout and component library considerations designers should note prior to starting a design.(read more)

Microwave Office is Cadence’s tool-of-choice for RF and microwave designers designing everything from III-V 5G chips, to RF systems in board and package technologies. These types of designs require close interaction between the schematic and its layout. A new Training Byte demonstrates how the schematic-layout connections is built into Microwave Office.(read more)

Data sets are a powerful and easy-to-use feature in Microwave Office. Data can be effortlessly be swapped in graphs, and circuit schematics.(read more)

A training webinar on Microwave Office will be given June 27, 2023. The emphasis will be on EM simulation.(read more)

A recording of a training webinar on Microwave Office is available. Topics show the design environment, with special emphasis placed on electromagnetic (EM) simulation. Normal 0 false false false EN-US JA X-NONE ...(read more)

By David Vye, Senior Product Marketing Manager, AWR, Cadence When designing multi-octave high-power amplifiers, it is a challenge to achieve both broadband gain and power matching using a combination of lumped and distributed techniques. One approach...(read more)

New online training course for AXIEM EM Simulator in AWR Microwave Office is available.(read more)

Are you ready to revolutionize your RF design experience? Look no further! Cadence AWR software is your gateway to mastering the intricacies of Radio Frequency (RF) circuit design, and now, you can explore its power with our exclusive Free Academic T...(read more)

Hello All:

I am looking for help on the following, as I am new to Cadence tools [I have to use Cadence Innovus for Physical Design after Logic Synthesis using Synopsys Design Compiler, using Nangate 45 nm Open Cell Library]: while using Cadence Innovus, I would need to select a few specific nets to be routed through a specific metal layer. How can I do this on Innovus [are there any command(s)]? Also, would writing and sourcing a .tcl script [containing the command(s)] on the Innovus terminal after the Placement Stage of Physical Design be fine for this?

Secondly, is there a way in Innovus to manipulate layout components, such as changing some pin placements, wire directions (say for example, wire direction changed to facing east from west, etc.) or moving specific closely placed cells around (without violating timing constraints of course) using any command(s)/.tcl script? If so, would pin placement changes and constraining some closely placed cells to be moved apart be done after Floorplanning/Powerplanning (that is, prior to Placement) and the wire direction changes be done after Routing? 

While making the necessary changes, could I use the usual Innovus commands to perform Physical Design of the remaining nets/wires/pins/cells, etc., or would anything need modification for the remaining components as well?

I would finally need to dump the entire design containing all of this in a .def file.

I tried looking up but could only find matter on Virtuoso and SKILL scripting, but I'd be using Innovus GUI/terminal with Nangate 45 nm Open Cell Library. I know this is a lot, but I would greatly appreciate your help. Thanks in advance.

Riya

Hi,

I have synthesized a verilog code. When performing the pnr in innovus it is showing the error "Instance g5891__718 (similar for other) of the cell AND2_X6 has no physical library or has wrong dimension  values (<=0). Check your design setup to make sure the physical library is loaded in and attribute specified in library are correct.

When importing synthesized netlist in virtuoso then it says " Module AND2_X6, instantiated in the top module decoder, is not defined. Therefore the top module decoder will be imported as functional."

Please help what's going on here? 

i want to read from text file two values  on two ports , i wrote  that  code, and i have that error that shown in the image below . and also the data in text file is shown as screenshot

module read_file (a,b);

electrical a,b;
integer in_file_0,data_value, valid, count0,int_value;

analog begin
@(initial_step) begin
in_file_0 = $fopen("/home/hh1667/ee610/my_library/read_file/data2.txt","r");

valid = $fscanf (in_file_0, "%b,%b" ,int_value,count0);
end

V(a) <+ int_value;
V(b) <+ count0;

end

endmodule

Hi Cadence, 

I use simvision 20.09-s007 but my computer screen resolution is very high. As a result, the texts are too small. 

In ~/.simvision/Xdefaults I changed that number to 16, from 12. But the signal names in the waveform traces don't reflect the change. 

Simvision*Font: -adobe-helvetica-medium-r-normal--16-*-*-*-*-*-*-*

Other .font changes seem to reflect on the simvision correctly, except the signal names. 

How do I fix that? I dont mind a single variable to change all the texts fonts to 16. 

Thank you!

PS: I found the answer with another post. I change Preference/Waveform/Display/Signal Height. 

I am scripting gds streamin using 'strmin', which works fine so far.

But, as it apparently doesn't have an option to specify where the cds.lib file is, I have to run it from the directory where the cds.lib file is, or I guess I could create a dummy one to source that one.

Is there a way to tell strmin where the cds.lib file is?

Dear all, 

I'm trying to perform an LVS check using Calibre between a layout that was generated by Innovus and the initial netlist generated by Genus. However, once I hit Run LVS on Calibre, it reports the following warnings and recommends to stop the process:

Source netlist references but does not define more than 10 subckts:
DFD1BWP7T
DFKCND1BWP7T
DFKCNQD1BWP7T
DFKSND1BWP7T
DFQD1BWP7T
IND2D0BWP7T
INR2D0BWP7T
INVD0BWP7T
INVD2P5BWP7T
IOA21D0BWP7T
... (and more)

If I proceed the LVS process it shows lots of errors as shown in the following image:

Why Genus doesn't include the definition of those sub circuits in the generated netlist? Is this related to Flat/Hierarchy netlisting? 

I have included my Genus scripts as well as the generated netlist in the attachments (and here - if attachment don't work).

Many thanks,

Anas

We are looking for suitable tools that could be used for RTL design, IP-XACT based  integration (third party IP) and RTL design verification ( SV / UVM based methodology).

Request to share details on the different Cadence tools that is most suitable for these activities.

Hi Cadence & forumers, 

I am running a conformal LEC with a flattened netlist against RTL. 

The run hang for 5 days at the "analyze abort" step which is automatically launched by the compare. 

The netlist is flattened at some levels so hierarchical flow which I tried didn't help much. The flattened/highly optimized netlist is from customer and the ultimate goal. How shall I proceed now? 

On the a side note, a test run with a hierarchical netlist from a simple DC "compile -map_effort medium" command finished after 1 day or so. 

Thank you! 

// Command: vpx compare -verbose -ABORT_Print -NONEQ_Print -TIMEstamp
// Starting multithreaded comparison ...
Comparing 241112 points in parallel.

// Multithreading Overhead: 38% Gates: 8501606/6168138
// Multithreaded processing completed.
================================================================================
Compared points PO DFF DLAT BBOX CUT Total
--------------------------------------------------------------------------------
Equivalent 1025 241638 30 75 21 242789
--------------------------------------------------------------------------------
Abort 0 124 0 0 0 124
================================================================================
Compare results of instance/output/pin equivalences and/or sequential merge
================================================================================
Compared points DFF Total
--------------------------------------------------------------------------------
Equivalent 204 204
================================================================================
// Warning: 512 DFFs/DLATs have 1 disabled clock port: skipped data cone comparison
// Resolving aborts by analyze abort...

I'm currently trying to explore the verilog simulation option in cadence.

One thing that comes to my mind that if there exists a way in cadence workflow to dump selected register/wire's waveform during the simulation. 

Are there any additional tools needed apart from xcelium, is there a tutorial or specific training course for this aspect. I glance through Xcelium Simulator Course Version 22.09, but it seems not having related context. 

I know in Synopsys's workflow, it can be realized using verdi & fsdb in the command line as follows:

if (inst.CTRL_STATE==STATE_START_TO_DUMP)

$fsdbDumpvars(0, inst_1.reg_0);

end

Thanks in advance!

I am not able to open 64bit version of simvision using the following :

simvision -64 -wav "path to wav"

This throws the error "  /lib64/libc.so.6: version `GLIBC_2.14' not found"

I am only able to open it without the -64 option.

As a result I am not able to use the source browser feature since the simulation was run in 64 bit mode.

Need suggestion on how to resolve this. Thanks.

Good morning,
I dug up an old project from 2005 and I should open the schematic to check some things.
This is the schematic of a XILINX XC95108-pq160 CPLD which the XILINX ISE 6.1 software then translated and compiled, to generate a JEDEC file to burn CPLD.

My problem is that I can't open schematics with the versions of Orcad Schematic Entry that I have.
Can anyone help me understand which version of Orcad Schematic Entry I need to install to see these files?

I shared the files on:
drive.google.com/.../view

Thank you very much

Hi, have two designs and would like to copy paste one area of circuit from the old design to the new design, best way/approach and guidance please..

Hello,

I am trying to load some of the signals of the design saved in the signals.svwf to the waveform windown via the tcl file, I am using the following commands but nothing works, Can you please help 

 -submit waveform loadsignals -using "Waveform 2" FB1.svwf but it gives me the below error

-submit waveform new -reuse -name Waveforms

Below is showing my Master.v

********************************************************************************************************************************************************************************************************************

///////ALU
module ALU (
    input [31:0] A,B,
    input[3:0] alu_control,
    output reg [31:0] alu_result,
    output reg zero_flag
);
    always @(*)
    begin
        // Operating based on control input
        case(alu_control)

        4'b0001: alu_result = A+B;
        4'b0010: alu_result = A-B;
        4'b0011: alu_result = A*B;
        4'b0100: alu_result = A|B;
        4'b0101: alu_result = A&B;
        4'b0110: alu_result = A^B;
        4'b0111: alu_result = ~B;
        4'b1000: alu_result = A<<B;
        4'b1001: alu_result = A>>B;
        4'b1010: begin
            if(A<B)
            alu_result = 1;
            else
            alu_result = 0;
        end
        default: alu_result = A+B;

        endcase

        // Setting Zero_flag if ALU_result is zero
        if (alu_result)
            zero_flag = 1'b1;
        else
            zero_flag = 1'b0;   
    end
endmodule


/////CONTROL UNIT
/*
Control unit controls takes opcode, funct7, funct3 of the instruction code to determine
and control regwrite in IFU, alu control in ALU to execute proper instruction
*/
/*
Control unit controls takes opcode, funct7, funct3 of the instruction code to determine
and control regwrite in IFU, alu control in ALU to execute proper instruction
*/
module CONTROL(
    input [4:0] opcode,
    output reg [3:0] alu_control,
    output reg regwrite_control,memread_control,memwrite_control
);
    always @(opcode)
    begin
       case(opcode)
        5'b00001: begin alu_control=4'b0001;  //add
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        5'b00010: begin alu_control=4'b0010;  ///sub
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        5'b00011: begin alu_control=4'b0011;  //mul
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b00100: begin alu_control=4'b0100;  ///OR
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b00101: begin alu_control=4'b0101;  ///AND
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        5'b00110: begin alu_control=4'b0110;  ///XOR
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b00111: begin alu_control=4'b0111;  ///NOT
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b01000: begin alu_control=4'b1000;  //SL
        regwrite_control=1; memread_control=1; memwrite_control=0;
        end
        5'b11001: begin alu_control=4'b1001;  //SR
        regwrite_control=1; memread_control=1; memwrite_control=0;
        end
        5'b01010: begin alu_control=4'b1010;  //COMPARE
        regwrite_control=1; memread_control=1; memwrite_control=0;
        end
        //5'b11010: begin ALU_control=4'b0000;  //SW
        //regwrite_control=1; memread_control=0; memwrite_control=0;
        //end
        //5'b01010: begin ALU_control=4'bxxxx;  //LW
        //regwrite_control=0; memread_control=0; memwrite_control=1;
        //end
        default : begin alu_control = 4'b0001;
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        endcase  
    end
endmodule



//////DATA MEMORY
module Data_Mem(
input clock, rd_mem_enable, wr_mem_enable,
input [11:0] address,
input [31:0] datawrite_to_mem,
output reg [31:0] dataread_from_mem );

reg [31:0] Data_Memory[8:0];

initial begin
    Data_Memory[0] = 32'hFFFFFFFF;
    Data_Memory[1] = 32'h00000001;
    Data_Memory[2] = 32'h00000005;
    Data_Memory[3] = 32'h00000003;
    Data_Memory[4] = 32'h00000004;
    Data_Memory[5] = 32'h00000000;
    Data_Memory[6] = 32'hFFFFFFFF;
    Data_Memory[7] = 32'h00000000;
    //Data_Memory[8] = 32'h00000008;
    //Data_Memory[9] = 32'h00000009;
    //Data_Memory[10] = 32'h0000000A;
    //Data_Memory[11] = 32'h0000000B;
    //Data_Memory[12] = 32'h0000000C;
    //Data_Memory[13] = 32'h0000000D;
    //Data_Memory[14] = 32'h0000000E;
    //Data_Memory[15] = 32'h0000000F;
    //Data_Memory[16] = 32'h00000010;
    //Data_Memory[17] = 32'h00000011;
    //Data_Memory[18] = 32'h00000012;
    //Data_Memory[19] = 32'h00000013;
    //Data_Memory[20] = 32'h00000014;
    //Data_Memory[21] = 32'h00000015;
    //Data_Memory[22] = 32'h00000016;
    //Data_Memory[23] = 32'h00000017;
    //Data_Memory[24] = 32'h00000018;
    //Data_Memory[25] = 32'h00000019;
    //Data_Memory[26] = 32'h0000001A;
    //Data_Memory[27] = 32'h0000001B;
    //Data_Memory[28] = 32'h0000001C;
    //Data_Memory[29] = 32'h0000001D;
    //Data_Memory[30] = 32'h0000001E;
    Data_Memory[31] = 32'h0000001F;
       
    end
    always@(posedge clock) begin
       if(wr_mem_enable) begin
            Data_Memory[address] <= datawrite_to_mem;
       end
       else if(rd_mem_enable) begin
               dataread_from_mem <= Data_Memory[address];
       end
       else begin
               dataread_from_mem <= 32'h00000000;
       end
    end
endmodule   



/////INST MEM
/*

*/
module INST_MEM(
    input [31:0] PC,
    input reset,
    output [31:0] Instruction_Code
);
    reg [7:0] Memory [43:0]; // Byte addressable memory with 32 locations

    
    assign Instruction_Code = {Memory[PC+3],Memory[PC+2],Memory[PC+1],Memory[PC]};

    
    
    initial begin
            // Setting 32-bit instruction: add t1, s0,s1 => 0x00940333
            Memory[3] = 8'b0000_0000;
            Memory[2] = 8'b0000_0001;
            Memory[1] = 8'b0111_1100;
            Memory[0] = 8'b0000_0001;
            // Setting 32-bit instruction: sub t2, s2, s3 => 0x413903b3
            Memory[7] = 8'b0000_0000;
            Memory[6] = 8'b0000_0110;
            Memory[5] = 8'b1000_1111;
            Memory[4] = 8'b1110_0010;
            // Setting 32-bit instruction: mul t0, s4, s5 => 0x035a02b3
            Memory[11] = 8'b0000_0000;
            Memory[10] = 8'b0000_0101;
            Memory[9] = 8'b0111_1100;
            Memory[8] = 8'b0000_0011;
            // Setting 32-bit instruction: or t3, s6, s7 => 0x017b4e33
            Memory[15] = 8'b1111_1111;
            Memory[14] = 8'b1111_0100;
            Memory[13] = 8'b1010_0000;
            Memory[12] = 8'b1010_0100;
            // Setting 32-bit instruction: and
            Memory[19] = 8'b0000_0000;
            Memory[18] = 8'b0010_1001;
            Memory[17] = 8'b0001_1101;
            Memory[16] = 8'b0010_0101;
            // Setting 32-bit instruction: xor
            Memory[23] = 8'b0000_0000;
            Memory[22] = 8'b0001_1000;
            Memory[21] = 8'b0000_1101;
            Memory[20] = 8'b0110_0110;
            // Setting 32-bit instruction: not
            Memory[27] = 8'b0000_0000;
            Memory[26] = 8'b0010_1001;
            Memory[25] = 8'b0011_1101;
            Memory[24] = 8'b1100_0111;
            // Setting 32-bit instruction: shift left
            Memory[31] = 8'b0000_0000;
            Memory[30] = 8'b0101_0111;
            Memory[29] = 8'b1100_0110;
            Memory[28] = 8'b0000_1000;
            // Setting 32-bit instruction: shift right
            Memory[35] = 8'b0000_0000;
            Memory[34] = 8'b0110_1010;
            Memory[33] = 8'b1101_0010;
            Memory[32] = 8'b0111_1001;
            /// Setting 32-bit instruction: Campare
            Memory[39] = 8'b0000_0000;
            Memory[38] = 8'b0111_1010;
            Memory[37] = 8'b1101_0010;
            Memory[36] = 8'b0110_1010;
            /// Setting 32-bit instruction:
            Memory[43] = 8'b0000_0000;
            Memory[42] = 8'b0111_0111;
            Memory[41] = 8'b1101_0010;
            Memory[40] = 8'b0111_0010;
        end
   

endmodule

//IFU
/*
The instruction fetch unit has clock and reset pins as input and 32-bit instruction code as output.
Internally the block has Instruction Memory, Program Counter(P.C) and an adder to increment counter by 4,
on every positive clock edge.
*/
module IFU(
    input clock,reset,
    output [31:0] Instruction_Code
);
reg [31:0] PC = 32'b0;  // 32-bit program counter is initialized to zero

    
    always @(posedge clock, posedge reset)
    begin
        if(reset == 1)  //If reset is one, clear the program counter
        PC <= 0;
        else
        PC <= PC+4;   // Increment program counter on positive clock edge
    end
    // Initializing the instruction memory block
    INST_MEM instr_mem(.PC(PC),.reset(reset),.Instruction_Code(Instruction_Code));

endmodule


///MUX

module Mux_2X1 (
    input mem_rd_select, // rd_mem_enable
    input wire [31:0] dataread_from_mem, regdata2,

    output reg [31:0] mux_out
);

always @(mem_rd_select or dataread_from_mem or regdata2) begin
    if (mem_rd_select == 1)
        mux_out <= dataread_from_mem ;
    else
        mux_out <= regdata2;
    end
endmodule

//DFlipFlop
module DFlipFlop(D,clock,Q);
input D; // Data input
input clock; // clock input
output reg Q; // output Q
always @(posedge clock)
begin
 Q <= D;
end
endmodule

///DATA path


module DATAPATH(
    input [4:0]Read_reg_add1,
    input [4:0]Read_reg_add2,
    input [4:0]Reg_write_add,
    input [3:0]Alu_control,
    input [11:0]Address,
    input Wr_reg_enable,Wr_mem_enable,Rd_mem_enable,
    input clock,
    input reset,
    output OUTPUT
    );

    // Declaring internal wires that carry data
    wire zero_flag;
    wire [31:0]Dataread_from_mem;
    wire [31:0]read_data1;
    wire [31:0]read_data2;
    wire [31:0]Mux_out;
    wire [31:0]Alu_result;
    //wire [31:0]datawrite_to_reg;

    // Instantiating the register file
    REG_FILE reg_file_module(.reg_read_add1(Read_reg_add1),.reg_read_add2(Read_reg_add2),.reg_write_add(Reg_write_add),.datawrite_to_reg(Alu_result),.read_data1(read_data1),.read_data2(read_data2),.wr_reg_enable(Wr_reg_enable),.clock(clock),.reset(reset));

    // Instanting ALU
    ALU alu_module(.A(read_data1), .B(Mux_out), .alu_control(Alu_control), .alu_result(Alu_result), .zero_flag(zero_flag));
    
    //Mux
    Mux_2X1 mux(.mem_rd_select(Rd_mem_enable),.dataread_from_mem(Dataread_from_mem),.regdata2(read_data2),.mux_out(Mux_out));

    //Data Memory
    Data_Mem DM(.clock(clock),.rd_mem_enable(Rd_mem_enable),.wr_mem_enable(Wr_mem_enable),.address(Address),.datawrite_to_mem(Alu_result),.dataread_from_mem(Dataread_from_mem));
    
    // Dflipflop
    DFlipFlop DF (.D(zero_flag), .Q(OUTPUT),.clock(clock));
endmodule


/*
A register file can read two registers and write in to one register.
The RISC V register file contains total of 32 registers each of size 32-bit.
Hence 5-bits are used to specify the register numbers that are to be read or written.
*/

/*
Register Read: Register file always outputs the contents of the register corresponding to read register numbers specified.
Reading a register is not dependent on any other signals.

Register Write: Register writes are controlled by a control signal RegWrite.  
Additionally the register file has a clock signal.
The write should happen if RegWrite signal is made 1 and if there is positive edge of clock.
*/
module REG_FILE(
    input [4:0] reg_read_add1,
    input [4:0] reg_read_add2,
    input [4:0] reg_write_add,
    input [31:0] datawrite_to_reg,
    output [31:0] read_data1,
    output [31:0] read_data2,
    input wr_reg_enable,
    input clock,
    input reset
);

    reg [31:0] reg_memory [31:0]; // 32 memory locations each 32 bits wide
    
    initial begin
        reg_memory[0] = 32'h00000000;
        reg_memory[1] = 32'hFFFFFFFF;
        reg_memory[2] = 32'h00000002;
        reg_memory[3] = 32'hFFFFFFFF;
        reg_memory[4] = 32'h00000004;
        reg_memory[5] = 32'h01010101;
        reg_memory[6] = 32'h00000006;
        reg_memory[7] = 32'h00000000;
        reg_memory[8] = 32'h10101010;
        reg_memory[9] = 32'h00000009;
        reg_memory[10] = 32'h0000000A;
        reg_memory[11] = 32'h0000000B;
        reg_memory[12] = 32'h0000000C;
        reg_memory[13] = 32'h0000000D;
        reg_memory[14] = 32'h0000000E;
        reg_memory[15] = 32'h0000000F;
        reg_memory[16] = 32'h00000010;
        reg_memory[17] = 32'h00000011;
        reg_memory[18] = 32'h00000012;
        reg_memory[19] = 32'h00000013;
        reg_memory[20] = 32'h00000014;
        reg_memory[21] = 32'h00000015;
        //reg_memory[22] = 32'h00000016;
        //reg_memory[23] = 32'h00000017;
        //reg_memory[24] = 32'h00000018;
        //reg_memory[25] = 32'h00000019;
        //reg_memory[26] = 32'h0000001A;
        //reg_memory[27] = 32'h0000001B;
        //reg_memory[28] = 32'h0000001C;
        //reg_memory[29] = 32'h0000001D;
        //reg_memory[30] = 32'h0000001E;
        reg_memory[31] = 32'hFFFFFFFF;
    end

    // The register file will always output the vaules corresponding to read register numbers
    // It is independent of any other signal
    assign read_data1 = reg_memory[reg_read_add1];
    assign read_data2 = reg_memory[reg_read_add2];

    // If clock edge is positive and regwrite is 1, we write data to specified register
    always @(posedge clock)
    begin
        if (wr_reg_enable) begin
            reg_memory[reg_write_add] = datawrite_to_reg;
        end     
    else
        reg_memory[reg_write_add] = 32'h00000000;
    end
endmodule


/////PROCESSOR


module PROCESSOR(
    input clock,
    input reset,
    output Output
);

    wire [31:0] instruction_Code;
    wire [3:0] ALu_control;
    wire WR_reg_enable;
    wire WR_mem_enable;
    wire RD_mem_enable;


    IFU IFU_module(.clock(clock), .reset(reset), .Instruction_Code(instruction_Code));
    
    CONTROL control_module(.opcode(instruction_Code[4:0]),.alu_control(ALu_control),.regwrite_control(WR_reg_enable),.memread_control(RD_mem_enable),.memwrite_control(WR_mem_enable));
    
    DATAPATH datapath_module(.Wr_mem_enable(WR_mem_enable),.Rd_mem_enable(RD_mem_enable),.Read_reg_add1(instruction_Code[9:5]),.Read_reg_add2(instruction_Code[14:10]),.Reg_write_add(instruction_Code[19:15]),.Address(instruction_Code[31:20]),.Alu_control(ALu_control),.Wr_reg_enable(WR_reg_enable), .clock(clock), .reset(reset), .OUTPUT(Output));

endmodule

**********************************************************************************************************************************************************

Below is my Synthesis.tcl file for genus synthesis

********************

set_attribute lib_search_path "/home/sameer23185/Desktop/VDF_PROJECT/lib"
set_attribute hdl_search_path "/home/sameer23185/Desktop/VDF_PROJECT"
set_attribute library "/home/sameer23185/Desktop/VDF_PROJECT/lib/90/fast.lib"
read_hdl Master.v
elaborate
read_sdc Min_area.sdc
set_attribute hdl_preserve_unused_register true
set_attribute delete_unloaded_seqs false
set_attribute optimize_constant_0_flops false
set_attribute optimize_constant_1_flops false
set_attribute optimize_constant_latches false
set_attribute optimize_constant_feedback_seqs false
#set_attribute prune_unsued_logic false
synthesize -to_mapped -effort medium
write_hdl > report/HDL_min_Netlist.v
write_sdc > report/constraints.sdc
write_script > report/synthesis.g
report_timing > report/synthesis_timing_report.rep
report_power > report/synthesis_power_report.rep
report_gates > report/synthesis_cell_report.rep
report_area > report/synthesis_area_report.rep
gui_show

**********************************************

WHEN I COMPARING MY GOLDEN.V WITH HDL_min_Netlist.v  during   conformal , I got  these  non-equivalent   point   for   every reg memory and for every data memory. I don't know what to do with these non-equivalent point. I've been stuck here for the past four days. Please help me in this and how can I remove this non- equivalent point , since I am new to this I really don't know what to do.

hi

How can I tell the LEC tool to ignore a combination of Primary input bus in both Golden and revised.

For example in both Golden and revised there is 

input [3:0] data_in

I want LEC not to check the case that data_in[3:0] == 4'b1000

I was trying to remove the cdn_loop_breaker cells from the netlist. 
When I tried the below 2 things, it removing the cdn_loop_breaker cells but while connecting the cdn_loop_breaker cell input to its proper connection, its somehow misleading the connections

Things i tried:
1.  remove_cdn_loop_breaker -instances *cdn_loop_breaker*
then i just ran remove_cdn_loop_breaker  comand without the -instances switch
2. remove_cdn_loop_breaker  
     
both of the above things are not providing the proper connections after removing the loop_breaker_cells

We have a big circuit having 12K gates totally and trying to show it in one page slide visually. But it is so hard for us to shrink it down from gate-level to module-level. Do you have any function like these:

• Toggle wires on and off
• “Right click” elements and group them into black boxes
• Quickly left or right align elements to clean up pictures

I am trying to understand the Linting process. I know that mainly JasperGold is the tool for this purpose. Though I think JasperGold is more suited for later stages of the design. As a RTL Design Engineer, I want to make sure that if another tool has the capability of doing Linting earlier in the flow. for example, does Xcelium, Genus or Confomal support linting. I have seen some contradicting information online regarding this topic, though I can't find anything related to Linting on any of these tools.

Thanks

Hi. I'm a very new learner on Cadence. I want to synthesis my logic design for the maximum, minimum and an average results of delay, power dissipation and area under varying multiple inputs of different data. The different data will be exported from other software results. I'm lost on the steps/processes I should do.

Could anyone suggest me on which software and/or function or scripts I should use to achieve these results?