A significant part of mélanges recognized in exhumed convergent margins around the world has been recently documented to have chiefly originated from masse transport and subsurface remobilization and disruption (i.e. mélanges, from sedimentary and mud–serpentinite diapiric processes and from in situ fluidification–disruption). Tectonic and/or sedimentary processes occurring during subsequent multiple deformational events of convergent margin evolution commonly overprint and significantly rework the primary (sedimentary or diapiric) mélange fabric, forming polygenetic mélanges. This ultimately complicates their distinction from true tectonic mélanges, masking part of the recorded tectono-sedimentary evolution of the associated convergent margin. The contributions gathered in this thematic collection explore with different approaches (from field structural and stratigraphic observations to geophysical analyses) different types of polygenetic mélange, at various scales, around the world. These studies conclude that the understanding of this type of mélange may provide crucial insights for a more detailed interpretation of the evolution of ancient and modern convergent margins, and of processes and mechanisms triggering potential natural hazards (earthquakes and tsunamis). Case studies include the Apennines in the Central Mediterranean region, the Carpathians in Central Europe and the Nankai Prism in Japan.

Thematic collection: This article is part of the ‘Polygenetic mélanges: a glimpse on tectonic sedimentary and diapiric recycling in convergent margins’ collection available at https://www.lyellcollection.org/cc/polygenetic-melanges

In the Central Western Carpathians (CWC), most published paleomagnetic results from Permo-Mesozoic rocks document extensive remagnetizations and come from thin-skinned thrust units that have undergone multistage deformation. We present results from lower Triassic redbeds from the autochthonous cover overlying the basement that carry a primary magnetization. Petromagnetic results indicate that the dominant ferromagnetic carrier is hematite, while magnetic susceptibility and its anisotropy are controlled by both ferromagnetic and paramagnetic minerals. Magnetic fabrics document weak deformation related to Late Cretaceous shortening. The directions of the high unblocking temperature remanence components pass both reversal and fold tests, attesting to their primary nature. Paleomagnetic inclinations are flatter than expected from reference datasets, suggesting small latitudinal separation between the CWC and stable Europe. Paleomagnetic declinations are mostly clustered within individual mountain massifs, implying their tectonic coherence. They show only minor differences between the massifs, indicating a lack of significant vertical-axis tectonic rotations within the studied central parts of the CWC. The paleomagnetic declinations are therefore representative of the whole of the CWC in terms of regional paleogeographic interpretations, and imply moderate counterclockwise rotations (c. 26°) of the region with respect to stable Europe since the Early Triassic.

Clinical and Vaccine Immunology (CVI) will merge with the American Society for Microbiology (ASM) open-access journal mSphere in January 2018. We commemorate this transition by exploring the history of CVI and that of its predecessor, Clinical and Diagnostic Laboratory Immunology (CDLI), and by acknowledging their contributors. Research on vaccines, clinical immunology, and clinical diagnostic immunology published through mSphere will be available without restrictions to an ever-larger audience, which will expedite progress in the field. ASM remains committed to supporting its members and the research community by facilitating the dissemination of scientific knowledge in these important areas.

Virus-like-particle (VLP) influenza vaccines can be given intramuscularly (i.m.) or intranasally (i.n.) and may have advantages over split-virion formulations in the elderly. We tested a plant-made VLP vaccine candidate bearing the viral hemagglutinin (HA) delivered either i.m. or i.n. in young and aged mice. Young adult (5- to 8-week-old) and aged (16- to 20-month-old) female BALB/c mice received a single 3-μg dose based on the HA (A/California/07/2009 H1N1) content of a plant-made H1-VLP (i.m. or i.n.) split-virion vaccine (i.m.) or were left naive. After vaccination, humoral and splenocyte responses were assessed, and some mice were challenged. Both VLP and split vaccines given i.m. protected 100% of the young animals, but the VLP group lost the least weight and had stronger humoral and cellular responses. Compared to split-vaccine recipients, aged animals vaccinated i.m. with VLP were more likely to survive challenge (80% versus 60%). The lung viral load postchallenge was lowest in the VLP i.m. groups. Mice vaccinated with VLP i.n. had little detectable immune response, but survival was significantly increased. In both age groups, i.m. administration of the H1-VLP vaccine elicited more balanced humoral and cellular responses and provided better protection from homologous challenge than the split-virion vaccine.

Reactive immunization with a single-dose cholera vaccine that could rapidly (within days) protect immunologically naive individuals during virgin soil epidemics, when cholera reaches immunologically naive populations that have not experienced cholera for decades, would facilitate cholera control. One dose of attenuated Vibrio cholerae O1 classical Inaba vaccine CVD 103-HgR (Vaxchora) containing ≥2 x 10⁸ CFU induces vibriocidal antibody seroconversion (a correlate of protection) in >90% of U.S. adults. A previous CVD 103-HgR commercial formulation required ≥2 x 10⁹ CFU to elicit high levels of seroconversion in populations in developing countries. We compared the vibriocidal responses of Malians (individuals 18 to 45 years old) randomized to ingest a single ≥2 x 10⁸-CFU standard dose (n = 50) or a ≥2 x 10⁹-CFU high dose (n = 50) of PaxVax CVD 103-HgR with buffer or two doses (n = 50) of Shanchol inactivated cholera vaccine (the immunologic comparator). To maintain blinding, participants were dosed twice 2 weeks apart; CVD 103-HgR recipients ingested placebo 2 weeks before or after ingesting vaccine. Seroconversion (a ≥4-fold vibriocidal titer rise) between the baseline and 14 days after CVD 103-HgR ingestion and following the first and second doses of Shanchol were the main outcomes measured. By day 14 postvaccination, the rates of seroconversion after ingestion of a single standard dose and a high dose of CVD 103-HgR were 71.7% (33/46 participants) and 83.3% (40/48 participants), respectively. The rate of seroconversion following the first dose of Shanchol, 56.0% (28/50 participants), was significantly lower than that following the high dose of CVD 103-HgR (P = 0.003). The vibriocidal geometric mean titer (GMT) of the high dose of CVD 103-HgR exceeded the GMT of the standard dose at day 14 (214 versus 95, P = 0.045) and was ~2-fold higher than the GMT on day 7 and day 14 following the first Shanchol dose (P > 0.05). High-dose CVD 103-HgR is recommended for accelerated evaluation in developing countries to assess its efficacy and practicality in field situations. (This study has been registered at ClinicalTrials.gov under registration no. NCT02145377.)

Current pneumococcal vaccines cover the 10 to 23 most common serotypes of the 92 presently described. However, with the increased usage of pneumococcal-serotype-based vaccines, the risk of serotype replacement and an increase in disease caused by nonvaccine serotypes remains. Serotype surveillance of pneumococcal infections relies heavily on culture techniques, which are known to be insensitive, particularly in cases of noninvasive disease. Pneumococcal-serotype-specific urine assays offer an alternative method of serotyping for both invasive and noninvasive disease. However, the assays described previously cover mainly conjugate vaccine serotypes, give little information about circulating nonvaccine serotypes, and are currently available only in one or two specialist laboratories. Our laboratory has developed a Luminex-based extended-range antigen capture assay to detect pneumococcal-serotype-specific antigens in urine samples. The assay targets 24 distinct serotypes/serogroups plus the cell wall polysaccharide (CWP) and some cross-reactive serotypes. We report that the assay is capable of detecting all the targeted serotypes and the CWP at 0.1 ng/ml, while some serotypes are detected at concentrations as low as 0.3 pg/ml. The analytical serotype specificity was determined to be 98.4% using a panel of polysaccharide-negative urine specimens spiked with nonpneumococcal bacterial antigens. We also report clinical sensitivities of 96.2% and specificities of 89.9% established using a panel of urine specimens from patients diagnosed with community-acquired pneumonia or pneumococcal disease. This assay can be extended for testing other clinical samples and has the potential to greatly improve serotype-specific surveillance in the many cases of pneumococcal disease in which a culture is never obtained.

Bovine tuberculosis (TB), caused by Mycobacterium bovis, remains an important zoonotic disease posing a serious threat to livestock and wildlife. The current TB tests relying on cell-mediated and humoral immune responses in cattle have performance limitations. To identify new serodiagnostic markers of bovine TB, we screened a panel of 101 recombinant proteins, including 10 polyepitope fusions, by a multiantigen print immunoassay (MAPIA) with well-characterized serum samples serially collected from cattle with experimental or naturally acquired M. bovis infection. A novel set of 12 seroreactive antigens was established. Evaluation of selected proteins in the dual-path platform (DPP) assay showed that the highest diagnostic accuracy (~95%) was achieved with a cocktail of five best-performing antigens, thus demonstrating the potential for development of an improved and more practical serodiagnostic test for bovine TB.

As yet, very few vaccine candidates with activity in animals against Mycobacterium tuberculosis infection have been tested as therapeutic postexposure vaccines. We recently described two pools of mycobacterial proteins with this activity, and here we describe further studies in which four of these proteins (Rv1738, Rv2032, Rv3130, and Rv3841) were generated as a fusion polypeptide and then delivered in a novel yeast-based platform (Tarmogen) which itself has immunostimulatory properties, including activation of Toll-like receptors. This platform can deliver antigens into both the class I and class II antigen presentation pathways and stimulate strong Th1 and Th17 responses. In mice this fusion vaccine, designated GI-19007, was immunogenic and elicited strong gamma interferon (IFN-) and interleukin-17 (IL-17) responses; despite this, they displayed minimal prophylactic activity in mice that were subsequently infected with a virulent clinical strain. In contrast, in a therapeutic model in the guinea pig, GI-19007 significantly reduced the lung bacterial load and reduced lung pathology, particularly in terms of secondary lesion development, while significantly improving survival in one-third of these animals. In further studies in which guinea pigs were vaccinated with BCG before challenge, therapeutic vaccination with GI-19007 initially improved survival versus that of animals given BCG alone, although this protective effect was gradually lost at around 400 days after challenge. Given its apparent ability to substantially limit bacterial dissemination within and from the lungs, GI-19007 potentially can be used to limit lung damage as well as facilitating chemotherapeutic regimens in infected individuals.

Neutralizing antibodies specific for respiratory syncytial virus (RSV) represent a major protective mechanism against RSV infection, as demonstrated by the efficacy of the immune-prophylactic monoclonal antibody palivizumab in preventing RSV-associated lower respiratory tract infections in premature infants. Accordingly, the RSV neutralization assay has become a key functional method to assess the neutralizing activity of serum antibodies in preclinical animal models, epidemiology studies, and clinical trials. In this study, we qualified a 24-h, fluorescent focus-based microneutralization (RSVA FFA-MN) method that requires no medium exchange or pre- or postinfection processing to detect green fluorescent protein-expressing RSV strain A2 (RSVA-GFP)-infected cells, using a high-content imaging system for automated image acquisition and focus enumeration. The RSVA FFA-MN method was shown to be sensitive, with a limit of detection (LOD) and limit of quantitation (LOQ) of 1:10, or 3.32 log₂; linear over a range of 4.27 to 9.65 log₂ 50% inhibitory concentration (IC₅₀); and precise, with intra- and interassay coefficients of variation of <21%. This precision allowed the choice of a statistically justified 3-fold-rise seroresponse cutoff criterion. The repeatability and robustness of this method were demonstrated by including a pooled human serum sample in every assay as a positive control (PC). Over 3 years of testing between two laboratories, this PC generated data falling within 2.5 standard deviations of the mean 98.7% of the time (n = 1,720). This high-throughput and reliable RSV microneutralization assay has proven useful for testing sera from preclinical vaccine candidate evaluation studies, epidemiology studies, and both pediatric and adult vaccine clinical trials.

The global burden of disease caused by extraintestinal pathogenic Escherichia coli (ExPEC) is increasing as the prevalence of multidrug-resistant strains rises. A multivalent ExPEC O-antigen bioconjugate vaccine could have a substantial impact in preventing bacteremia and urinary tract infections. Development of an ExPEC vaccine requires a readout to assess the functionality of antibodies. We developed an opsonophagocytic killing assay (OPA) for four ExPEC serotypes (serotypes O1A, O2, O6A, and O25B) based on methods established for pneumococcal conjugate vaccines. The performance of the assay was assessed with human serum by computing the precision, linearity, trueness, total error, working range, and specificity. Serotypes O1A and O6A met the acceptance criteria for precision (coefficient of variation for repeatability and intermediate precision, ≤50%), linearity (90% confidence interval of the slope of each strain, 0.80, 1.25), trueness (relative bias range, –30% to 30%), and total error (total error range, –65% to 183%) at five serum concentrations and serotypes O2 and O25B met the acceptance criteria at four concentrations (the lowest concentration for serotypes O2 and O25B did not meet the system suitability test of maximum killing of ≥85% of E. coli cells). All serotypes met the acceptance criteria for specificity (opsonization index value reductions of ≤20% for heterologous serum preadsorption and ≥70% for homologous serum preadsorption). The assay working range was defined on the basis of the lowest and highest concentrations at which the assay jointly fulfilled the target acceptance criteria for linearity, precision, and accuracy. An OPA suitable for multiple E. coli serotypes has been developed, qualified, and used to assess the immunogenicity of a 4-valent E. coli bioconjugate vaccine (ExPEC4V) administered to humans.

In December 2019, a novel coronavirus causing an infectious respiratory disease (COVID-19) was identified, which since then has developed into a pandemic with higher rates of mortality in older individuals and those with underlying medical conditions.¹ Multiple sclerosis (MS) is an immune-mediated neurologic disease which requires long-term treatment with immunotherapies that have been shown to increase the risk of infections.² As a result, there is significant anxiety among patients and neurologists during the pandemic regarding the infection outcome in this patient population. We present a patient with MS treated with fingolimod who was diagnosed with COVID-19 and had a favorable outcome.

At the time of this writing, healthcare systems are facing worldwide the pandemic of the coronavirus severe acute respiratory coronavirus 2 (SARS-COV-2) and its associated disease, named cronavirus disease 19 (COVID-19). This virus is a new human pathogen, and currently, there are no specific treatment options.¹ COVID-19 mostly affects the respiratory system, ranging from mild flu-like symptoms to severe pneumonia, but extrarespiratory multisystemic involvement has also been reported.² Li et al.³ recently described the neuroinvasive potential of COVID-19, but, to our knowledge, no case of acute dysimmune neuropathy has been described so far. Here, the authors report the case of an acute and severe peripheral nervous system disorder possibly related to COVID-19 infection.

Anaplastic lymphoma kinase (ALK) inhibitors have been used in patients with non-small cell lung cancer (NSCLC) harboring EML4-ALK fusion gene.¹ Severe skeletal muscle adverse events of ALK inhibitors, such as muscle weakness, have seldom been reported.^2,3 Herein, we describe a patient who showed a severe skeletal muscle deficit after the administration of the ALK inhibitor, alectinib, and was successfully treated by corticosteroids without withdrawal from the cancer therapy.

In the article "Neurologic syndromes related to anti-GAD65: Clinical and serologic response to treatment" by Muñoz-Lopetegi et al.,¹ published online March 2, 2020, the y-axis label for figure 5’s right graph should be "CSF anti-GAD65 concentration (IU/mL)." The editorial office regrets the error.

Objective

To assess the impact of APOE polymorphisms on cognitive performance in patients newly diagnosed with clinically isolated syndrome (CIS) or relapsing-remitting MS (RRMS).

Objective

To determine whether live-attenuated yellow fever vaccine (YFV) was associated with MS relapse, we evaluated the clinical courses of 23 patients in the year before and the year after immunization at the university hospital of Geneva, Switzerland.

Objective

To investigate the immunologic impact of a single cycle of rituximab (RTX) in children and adolescents with immune-mediated disorders, we evaluated B cells and immunoglobulin levels of 20 patients with neuroimmunologic, nephrologic, dermatologic, and rheumatologic disorders treated under recommended guidelines.

Objective

To determine the characteristic clinical and spinal MRI phenotypes of sarcoidosis-associated myelopathy (SAM), we analyzed a large cohort of patients with this disorder.

South Africa is a mineral-rich country with a diverse geology and a long history of mining. The rich history of mining activities includes the extraction of coal from the Ecca Group Sediments of the Karoo Supergroup (250 Ma), gold and uranium from the Witwatersrand Supergroup (2900 Ma), as well as platinum, uranium, tin and lead from the layered Bushveld Igneous Complex (BIC) (2150 Ma). The extraction of gold, copper, tin, lead and rare earth minerals also took place in the Archean rocks of Swazium age (3500–3000 Ma). The historical mining records have either not been accurately recorded or have been lost over time. This has resulted in significant geohazard risk during infrastructure development, especially in and around historical mining towns, such as Johannesburg and Ermelo. These geohazard risks require careful appraisal and quantification prior to any infrastructure design or construction.

This case study aims to set out the development aspects of the Multi-Faceted Geophysical Modelling Systems approach, which was used by the South African National Roads Agency SOC Ltd (SANRAL) during an investigation of undermined ground for the historical coal-mining town of Ermelo in South Africa. The N11/N2 ring road was planned to go around Ermelo to ensure mobility between major routes, whilst still maintaining town access.

The systems approach used a combination of airborne geophysics (Versatile Time Domain Electromagnetic System (VTEM^TM) and magnetics), generally used in mining exploration, land-based and borehole geophysics, borehole water testing, and ground-truthing. The approach was continuous and iterative, building on the data at hand and reducing unnecessary investigations while eliminating the possibility of anomalies being missed, as in the case of conventional discrete drilling. The investigation ensured that 100% of the route was comprehensively investigated with a high confidence in the geological and geophysical data, and concomitant mitigation of infrastructure risk.

The Multi-Faceted Geophysical Modelling Systems approach was successfully used to identify a previously unknown 1 x 1 m mining stope cavity at 90 m depth and a 3 x 5 m access tunnel at 24 m depth in a timely and cost-effective manner. Seven reverse-circulation percussion boreholes confirmed the structural integrity of these underground cavities, as well as the structural geology along the centreline. Based on the great success achieved in identifying shallow anomalies, this Multi-Faceted Geophysical Modelling Systems approach is now being considered for field trails on the dolomitic formations and the Wild Coast greenfields road project where there are large historical slumps and many fault lines.

Thematic collection: This article is part of the Ground-related risk to transportation infrastructure collection available at https://www.lyellcollection.org/cc/Ground-related-risk-to-transportation-infrastructure

The presence of large palaeo-landslides can hinder the construction of railway lines if they cause an alteration of the natural balance of the slope, significantly increasing the cost of the project. During the construction works in a section of the Madrid–Asturias high-speed railway line (Spain), a large-scale hillside instability affected 460 m of the section. The ground movement began 10 months after the start of the excavations and remained active throughout the observation period (2008–2010). Data provided by fieldwork, boreholes and instrumental monitoring have allowed the investigation of the geological units involved, together with the geometry and the kinematics of the mass movement. This landslide involves a Paleozoic basement with an estimated volume of 4 400 000 m³. It shows low displacement rates (<45 mm a^–1) and was accommodated on a single surface of rupture, which reaches more than 60 m depth. The kinematics is favoured by structural and lithological conditions, there being a strong rheological contrast in the lower part of the mobilized ground. This movement is linked to a large palaeo-landslide that was partially reactivated when excavations undermined the lower slopes of the hillside. Technical solutions for the stabilization have already caused an additional cost of 17% over the initial budget.

Loess, a wind-blown silty soil, can be deposited under a variety of moisture conditions, including dry deposition, wet deposition and gravitational settling of aggregations formed in moist air by capillary forces at grain contacts. This experimental study uses single and double oedometer tests to assess the effect of depositional water content on the collapse potential of reconstituted samples of the Langley Silt Member, known as Brickearth, a natural loessic soil. A freefall sample preparation technique was used to mimic loess formation and environmental scanning electron microscopy was used to relate the observed behaviour to sample fabric. The results show that loess deposited at higher water contents has a greater collapse potential, which is shown to be related to its looser, more granular fabric.

This case study aims to identify the cubic capacity and geometry of the geological body of silt–organic sediments in the environment of a former gravel pit situated in a drainless depression of the alluvium of the Čierna voda River. It is located in the well-known geotourism locality of Slnečné Jazera in Senec, in the SW of Slovakia. To identify the body, electrical resistivity tomography was combined with the use of sonar. The research shows that this approach is appropriate for a number of activities that are subjects of engineering-geological investigations. The cubic capacity and geometry of specific aqueous engineering-geological environments must be determined in connection with the need for the management, control, quantification and extraction of selected sedimentary bodies. In addition, the management of sustainable development of reservoirs, sedimentation basins, industrial ponds, settling pits and natural pools for recreation (the subject of the case study) is important to control the limit amounts of sediments in such environments. The results of this study may be applied in analogous engineering-geological conditions. The drainless depression Slnečné Jazera contained a body of silt–organic sediments amounting to 23 000 m³ (41 Olympic-size pools of 25 m x 12.5 m x 1.8 m). The maximum thickness of the bottom sediments was about 6.3 m on the alluvium with an articulated morphology owing to the submerged digging of gravel. The proposed approach improved the control of extraction of the sedimentary body and optimized the engineering-geological conditions in this geotourism locality.

The decline or drying up of groundwater sources near a tunnel route is damaging to groundwater users. Therefore, forecasting the impact of a tunnel on nearby groundwater sources is a challenging task in tunnel design. In this study, numerical and analytical approaches were applied to the Qomroud water conveyance tunnel (located in Lorestan province, Iran) to assess the impact of tunnelling on the nearby extraction water wells. Using simulation of groundwater-level fluctuation owing to tunnelling, the drawdown at the well locations was determined. From the drawdowns and using Dupuit's equation, the depletion of well flow rates after tunnelling was estimated. To evaluate the results, observed well flow rates before and after tunnelling were compared with the predicted flow rates. The observed and estimated water well flows (before and after tunnelling) showed a regression factor of 0.64, pointing to satisfactory results

The Clay-with-flints Formation outcrops on the high chalk plateaux and interfluves of the chalk downs in southern England. Both current and historical definitions of the Clay-with-flints are detailed and important distinctions are identified with other deposits that appear identical but are formed in different ways. Historically pedological or geomorphological studies have been carried out on the deposit. Engineering studies are only carried out where the deposit is crossed by infrastructure. The physical and chemical processes acting on the deposit and the resulting effects on the physical properties are discussed.

In this paper, a decision tree is presented, constructed on the basis of hydrogeological characteristics (water table depth, freshwater thickness, surface area required and distance between wells), to choose the optimal groundwater extraction method in the case of a coastal unconfined aquifer. A comparison is made of the groundwater extraction methods in a freshwater aquifer of limited thickness occurring in coastal dunes in the eastern region of the Province of Buenos Aires (Argentina). The negative effects brought about by the wrong use of the groundwater extraction methods are analysed, because, as a result of excessive extraction, such methods lead to the dramatic decrease of the freshwater reserves. The decision tree is a useful tool to assist decision-makers as it suggests the most suitable groundwater extraction method options (vertical wells or wellpoints), as well as identifying areas that are unsuitable for sustainable groundwater extraction.

In 2015, the M_w 7.8 Gorkha earthquake struck Nepal, triggering thousands of landslides across the central and eastern Himalayas. These landslides had many adverse effects, including causing widespread damage to low-grade transport routes (e.g. tracks, footpaths) in rural regions that depend on tourism for survival. Langtang Valley is a glacial–periglacial landscape located 60 km north of Kathmandu. It is one of the most popular trekking regions in Nepal and has been severely affected by Gorkha earthquake-triggered and monsoon-triggered landsliding. Here, qualitative and quantitative observations from fieldwork and remote sensing are used to describe the materials and geomorphology of the landslides across Langtang Valley, and to quantify the extent to which coseismic and monsoon-triggered landslides have affected Langtang's trekking infrastructure. The dominant bedrock materials involved within Langtang landslides are found to be a range of gneisses and intruded leucogranites. In total, 64 landslides are found to have intersected trekking paths across Langtang, with coseismic and monsoon-triggered landslides having an impact on c. 3 km and 0.8 km of path respectively. It is observed that the practice of reconstructing paths through unstable landslide deposits is leaving the trekking infrastructure across Langtang increasingly vulnerable to future failure.

Leprosy is caused by Mycobacterium leprae, and it remains underdiagnosed in Burkina Faso. We investigated the use of fluorescent in situ hybridization (FISH) for detecting M. leprae in 27 skin samples (skin biopsy samples, slit skin samples, and skin lesion swabs) collected from 21 patients from Burkina Faso and three from Côte d’Ivoire who were suspected of having cutaneous leprosy. In all seven Ziehl-Neelsen-positive skin samples (four skin biopsy samples and three skin swabs collected from the same patient), FISH specifically identified M. leprae, including one FISH-positive skin biopsy sample that remained negative after testing with PCR targeting the rpoB gene and with the GenoType LepraeDR assay. Twenty other skin samples and three negative controls all remained negative for Ziehl-Neelsen staining, FISH, and rpoB PCR. These data indicate the usefulness of a microscopic examination of skin samples after FISH for first-line diagnosis of cutaneous leprosy. Accordingly, FISH represents a potentially useful point-of-care test for the diagnosis of cutaneous leprosy.

Routine identification of fungal pathogens from positive blood cultures by culture-based methods can be time-consuming, delaying treatment with appropriate antifungal agents. The GenMark Dx ePlex investigational use only blood culture identification fungal pathogen panel (BCID-FP) rapidly detects 15 fungal targets simultaneously in blood culture samples positive for fungi by Gram staining. We aimed to determine the performance of the BCID-FP in a multicenter clinical study. Blood culture samples collected at 10 United States sites and tested with BCID-FP at 4 sites were compared to the standard-of-care microbiological and biochemical techniques, fluorescence in situ hybridization using peptide nucleic acid probes (PNA-FISH) and matrix-assisted laser desorption ionization–time of flight mass spectrometry (MALDI-TOF MS). Discrepant results were analyzed by bi-directional PCR/sequencing of residual blood culture samples. A total of 866 clinical samples, 120 retrospectively and 21 prospectively collected, along with 725 contrived samples were evaluated. Sensitivity and specificity of detection of Candida species (C. albicans, C. auris, C. dubliniensis, C. famata, C. glabrata, C. guilliermondii, C. kefyr, C. krusei, C. lusitaniae, C. parapsilosis, and C. tropicalis) ranged from 97.1 to 100% and 99.8 to 100%, respectively. For the other organism targets, sensitivity and specificity were as follows: 100% each for Cryptococcus neoformans and C. gattii, 98.6% and 100% for Fusarium spp., and 96.2% and 99.9% for Rhodotorula spp., respectively. In 4 of the 141 clinical samples, the BCID-FP panel correctly identified an additional Candida species, undetected by standard-of-care methods. The BCID-FP panel offers a faster turnaround time for identification of fungal pathogens in positive blood cultures that may allow for earlier antifungal interventions and includes C. auris, a highly multidrug-resistant fungus.

Infections due to methicillin-resistant Staphylococcus aureus (MRSA) are present worldwide and represent a major public health concern. The capability of PCR followed by high-resolution melt (HRM) curve analysis for the detection of community-associated and livestock-associated MRSA strains and the identification of staphylococcal protein A (spa) locus was evaluated in 74 MRSA samples which were isolated from the environment, humans, and pigs on a single piggery. PCR-HRM curve analysis identified four spa types among MRSA samples and differentiated MRSA strains accordingly. A nonsubjective differentiation model was developed according to genetic confidence percentage values produced by tested samples, which did not require visual interpretation of HRM curve results. The test was carried out at different settings, and result data were reanalyzed and confirmed with DNA sequencing. PCR-HRM curve analysis proved to be a robust and reliable test for spa typing and can be used as a tool in epidemiological studies.

Quantitative bacterial culture of bronchoalveolar lavage fluids (BALF) is labor-intensive, and the delay involved in performing culture, definitive identification, and susceptibility testing often results in prolonged use of broad-spectrum antibiotics. The Unyvero lower respiratory tract (LRT) panel (Curetis, Holzgerlingen, Germany) allows the multiplexed rapid detection and identification of 20 potential etiologic agents of pneumonia within 5 h of collection. In addition, the assay includes detection of gene sequences that confer antimicrobial resistance. We retrospectively compared the performance of the molecular panel to routine quantitative bacterial culture methods on remnant BALF. Upon testing 175 BALF, we were able to analyze positive agreement of 181 targets from 129 samples, and 46 samples were negative. The positive percent agreement (PPA) among the microbial targets was 96.5%, and the negative percent agreement (NPA) was 99.6%. The targets with a PPA of <100% were Staphylococcus aureus (34/37 [91.9%]), Streptococcus pneumoniae (10/11 [90.9%]), and Enterobacter cloacae complex (2/4 [50%]). For the analyzable resistance targets, concordance with phenotypic susceptibility testing was 79% (14/18). This study found the Unyvero LRT panel largely concordant with culture results; however, no outcome or clinical impact studies were performed.

Klebsiella species are problematic pathogens in neonatal units and may cause outbreaks, for which the sources of transmission may be challenging to elucidate. We describe the use of whole-genome sequencing (WGS) to investigate environmental sources of transmission during an outbreak of extended-spectrum-β-lactamase (ESBL)-producing Klebsiella michiganensis colonizing neonates. Ceftriaxone-resistant Klebsiella spp. isolated from neonates (or their mothers) and the hospital environment were included. Short-read sequencing (Illumina) and long-read sequencing (MinION; Oxford Nanopore Technologies) were used to confirm species taxonomy, to identify antimicrobial resistance genes, and to determine phylogenetic relationships using single-nucleotide polymorphism profiling. A total of 21 organisms (10 patient-derived isolates and 11 environmental isolates) were sequenced. Standard laboratory methods identified the outbreak strain as an ESBL-producing Klebsiella oxytoca, but taxonomic assignment from WGS data suggested closer identity to Klebsiella michiganensis. Strains isolated from multiple detergent-dispensing bottles were either identical or closely related by single-nucleotide polymorphism comparison. Detergent bottles contaminated by K. michiganensis had been used for washing milk expression equipment. No new cases were identified once the detergent bottles were removed. Environmental reservoirs may be an important source in outbreaks of multidrug-resistant organisms. WGS, in conjunction with traditional epidemiological investigation, can be instrumental in revealing routes of transmission and guiding infection control responses.

Microscopy and rapid diagnostic tests (RDTs) are the main diagnostic tools for malaria but fail to detect low-density parasitemias that are important for maintaining malaria transmission. To complement existing diagnostic methods, an isothermal reverse transcription-recombinase polymerase amplification and lateral flow assay (RT-RPA) was developed. We compared the performance with that of ultrasensitive reverse transcription-quantitative PCR (uRT-qPCR) using nucleic acid extracts from blood samples (n = 114) obtained after standardized controlled human malaria infection (CHMI) with Plasmodium falciparum sporozoites. As a preliminary investigation, we also sampled asymptomatic individuals (n = 28) in an area of malaria endemicity (Lambaréné, Gabon) to validate RT-RPA and assess its performance with unprocessed blood samples (dbRT-RPA). In 114 samples analyzed from CHMI trials, the positive percent agreement to uRT-qPCR was 90% (95% confidence interval [CI], 80 to 96). The negative percent agreement was 100% (95% CI, 92 to 100). The lower limit of detection was 64 parasites/ml. In Gabon, RT-RPA was 100% accurate with asymptomatic volunteers (n = 28), while simplified dbRT-RPA showed 89% accuracy. In a subgroup analysis, RT-RPA detected 9/10 RT-qPCR-positive samples, while loop-mediated isothermal amplification (LAMP) detected 2/10. RT-RPA is a reliable diagnostic test for asymptomatic low-density infections. It is particularly useful in settings where uRT-qPCR is difficult to implement.

Lyme borreliosis is a tick-borne disease caused by the Borrelia burgdorferi sensu lato complex. Bio-Rad Laboratories has developed a fully automated multiplex bead-based assay for the detection of IgM and IgG antibodies to B. burgdorferi. The BioPlex 2200 Lyme Total assay exhibits an improved rate of seropositivity in patients with early Lyme infection. Asymptomatic subjects from endemic and nonendemic origins demonstrated a seroreactivity rate of approximately 4% that was similar to other commercial assays evaluated in this study. Coupled to this result was the observation that the Lyme Total assay retained a high first-tier specificity of 96% while demonstrating a relatively high sensitivity of 91% among a well-characterized CDC Premarketing Lyme serum panel. The Lyme Total assay also performs well under a modified two-tier algorithm (sensitivity, 84.4 to 88.9%; specificity, 98.4 to 99.5%). Furthermore, the new assay is able to readily detect early Lyme infection in patient samples from outside North America.

MALDI-TOF mass spectrometry (MS) identification of pathogenic filamentous fungi is often impaired by difficulties in harvesting hyphae embedded in the medium and long extraction protocols. The ID Fungi Plate (IDFP) is a novel culture method developed to address such difficulties and improve the identification of filamentous fungi by MALDI-TOF MS. We cultured 64 strains and 11 clinical samples on IDFP, Sabouraud agar-chloramphenicol (SAB), and ChromID Candida agar (CAN2). We then compared the three media for growth, ease of harvest, amount of material picked, and MALDI-TOF identification scores after either rapid direct transfer (DT) or a long ethanol-acetonitrile (EA) extraction protocol. Antifungal susceptibility testing and microscopic morphology after subculture on SAB and IDFP were also compared for ten molds. Growth rates and morphological aspects were similar for the three media. With IDFP, harvesting of fungal material for the extraction procedure was rapid and easy in 92.4% of cases, whereas it was tedious on SAB or CAN2 in 65.2% and 80.3% of cases, respectively. The proportion of scores above 1.7 (defined as acceptable identification) were comparable for both extraction protocols using IDFP (P = 0.256). Moreover, rates of acceptable identification after DT performed on IDFP (93.9%) were significantly higher than those obtained after EA extraction with SAB (69.7%) or CAN2 (71.2%) (P = <0.001 and P = 0.001, respectively). Morphological aspects and antifungal susceptibility testing were similar between IDFP and SAB. IDFP is a culture plate that facilitates and improves the identification of filamentous fungi, allowing accurate routine identification of molds with MALDI-TOF-MS using a rapid-extraction protocol.

Prosthetic joint infections are difficult to diagnose and treat due to biofilm formation by the causative pathogens. Pathogen identification relies on microbial culture that requires days to weeks, and in the case of chronic biofilm infections, lacks sensitivity. Diagnosis of infection is often delayed past the point of effective treatment such that only the removal of the implant is curative. Early diagnosis of an infection based on antibody detection might lead to less invasive, early interventions. Our study examined antibody-based assays against the Staphylococcus aureus biofilm-upregulated antigens SAOCOL0486 (a lipoprotein), glucosaminidase (a domain of SACOL1062), and SACOL0688 (the manganese transporter MntC) for detection of chronic S. aureus infection. We evaluated these antigens by enzyme-linked immunosorbent assay (ELISA) using sera from naive rabbits and rabbits with S. aureus-mediated osteomyelitis, and then we validated a proof of concept for the lateral flow assay (LFA). The SACOL0688 LFA demonstrated 100% specificity and 100% sensitivity. We demonstrated the clinical diagnostic utility of the SACOL0688 antigen using synovial fluid (SF) from humans with orthopedic implant infections. Elevated antibody levels to SACOL0688 in clinical SF specimens correlated with 91% sensitivity and 100% specificity for the diagnosis of S. aureus infection by ELISA. We found measuring antibodies levels to SACOL0688 in SF using ELISA or LFA provides a tool for the sensitive and specific diagnosis of S. aureus prosthetic joint infection. Development of the LFA diagnostic modality is a desirable, cost-effective option, potentially providing rapid readout in minutes for chronic biofilm infections.

There are roughly 48,000 deaths caused by influenza annually and an estimated 200,000 people who have undiagnosed human immunodeficiency virus (HIV). These are examples of acute and chronic illnesses that can be identified by employing a CLIA-waived test. Pharmacies across the country have been incorporating CLIA-waived point-of-care tests (POCT) into disease screening and management programs offered in the pharmacy. The rationale behind these programs is discussed. Additionally, a summary of clinical data for some of these programs in the infectious disease arena is provided. Finally, we discuss the future potential for CLIA-waived POCT-based programs in community pharmacies.

Human herpesvirus 6 (HHV-6) is an important cause of meningitis and meningoencephalitis. As testing for HHV-6 in cerebrospinal fluid (CSF) is more readily available using the FilmArray Meningitis/Encephalitis panel (FA-ME; BioFire Diagnostics, Salt Lake City, UT), we aimed to determine the clinical significance of detecting HHV-6 in order to identify true infections and to ensure appropriate antiviral initiation. Chart review on 25 patients positive for HHV-6 by FA-ME was performed to determine clinical presentation, comorbidity, treatment, and outcome. The presence of chromosomally integrated HHV-6 (ciHHV-6) DNA was also investigated. Of 1,005 children tested by FA-ME, HHV-6 was detected in 25 (2.5%). Five patients were diagnosed with either HHV-6 meningitis or meningoencephalitis based on HHV-6 detection in CSF, clinical presentation, and radiographic findings. Detection of HHV-6 by FA-ME led to discontinuation of acyclovir within 12.0 h in all 12 patients empirically treated with acyclovir. Six of the 12 patients were started on ganciclovir therapy within 6.8 h; 4 of these were treated specifically for HHV-6 infection, whereas therapy was discontinued in the remaining 2 patients. CSF parameters were not generally predictive of HHV-6 positivity. The presence of ciHHV-6 was confirmed in 3 of 18 patients who could be tested. Five of the 25 patients included in the study were diagnosed with HHV-6 meningitis/meningoencephalitis. FA-ME results led to discontinuation of empirical antiviral treatment in 12 patients and appropriate initiation of ganciclovir in 4 patients. In our institution, detection of HHV-6 using FA-ME led to faster establishment of disease etiology and optimization of antimicrobial therapy.

On 31 December 2019, the World Health Organization was informed of a cluster of cases of pneumonia of unknown etiology in Wuhan, China. Subsequent investigations identified a novel coronavirus, now named severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), from the affected patients. Highly sensitive and specific laboratory diagnostics are important for controlling the rapidly evolving SARS-CoV-2-associated coronavirus disease 2019 (COVID-19) epidemic. In this study, we developed and compared the performance of three novel real-time reverse transcription-PCR (RT-PCR) assays targeting the RNA-dependent RNA polymerase (RdRp)/helicase (Hel), spike (S), and nucleocapsid (N) genes of SARS-CoV-2 with that of the reported RdRp-P2 assay, which is used in >30 European laboratories. Among the three novel assays, the COVID-19-RdRp/Hel assay had the lowest limit of detection in vitro (1.8 50% tissue culture infective doses [TCID₅₀]/ml with genomic RNA and 11.2 RNA copies/reaction with in vitro RNA transcripts). Among 273 specimens from 15 patients with laboratory-confirmed COVID-19 in Hong Kong, 77 (28.2%) were positive by both the COVID-19-RdRp/Hel and RdRp-P2 assays. The COVID-19-RdRp/Hel assay was positive for an additional 42 RdRp-P2-negative specimens (119/273 [43.6%] versus 77/273 [28.2%]; P < 0.001), including 29/120 (24.2%) respiratory tract specimens and 13/153 (8.5%) non-respiratory tract specimens. The mean viral load of these specimens was 3.21 x 10⁴ RNA copies/ml (range, 2.21 x 10² to 4.71 x 10⁵ RNA copies/ml). The COVID-19-RdRp/Hel assay did not cross-react with other human-pathogenic coronaviruses and respiratory pathogens in cell culture and clinical specimens, whereas the RdRp-P2 assay cross-reacted with SARS-CoV in cell culture. The highly sensitive and specific COVID-19-RdRp/Hel assay may help to improve the laboratory diagnosis of COVID-19.

The IR Biotyper is a new automated typing system based on Fourier-transform infrared (FT-IR) spectroscopy that gives results within 4 h. We aimed (i) to use the IR Biotyper to retrospectively analyze an outbreak of extended-spectrum beta-lactamase-producing Klebsiella pneumoniae (ESBL-KP) in a neonatal intensive care unit and to compare results to BOX-PCR and whole-genome sequencing (WGS) results as the gold standard and (ii) to assess how the cutoff values used to define clusters affect the discriminatory power of the IR Biotyper. The sample consisted of 18 isolates from 14 patients. Specimens were analyzed in the IR Biotyper using the default analysis settings, and spectra were analyzed using OPUS 7.5 software. The software contains a feature that automatically proposes a cutoff value to define clusters; the cutoff value defines up to which distance the spectra are considered to be in the same cluster. Based on FT-IR, the outbreak represented 1 dominant clone, 1 secondary clone, and several unrelated clones. FT-IR results, using the cutoff value generated by the accompanying software after 4 replicates, were concordant with WGS for all but 1 isolate. BOX-PCR was underdiscriminatory compared to the other two methods. Using the cutoff value generated after 12 replicates, the results of FT-IR and WGS were completely concordant. The IR Biotyper can achieve the same typeability and discriminatory power as genome-based methods. However, to attain this high performance requires either previous, strain-dependent knowledge about the optimal technical parameters to be used or validation by a second method.

A time course experiment is a widely used design in the study of cellular processes such as differentiation or response to stimuli. In this paper, we propose time course regulatory analysis (TimeReg) as a method for the analysis of gene regulatory networks based on paired gene expression and chromatin accessibility data from a time course. TimeReg can be used to prioritize regulatory elements, to extract core regulatory modules at each time point, to identify key regulators driving changes of the cellular state, and to causally connect the modules across different time points. We applied the method to analyze paired chromatin accessibility and gene expression data from a retinoic acid (RA)–induced mouse embryonic stem cells (mESCs) differentiation experiment. The analysis identified 57,048 novel regulatory elements regulating cerebellar development, synapse assembly, and hindbrain morphogenesis, which substantially extended our knowledge of cis-regulatory elements during differentiation. Using single-cell RNA-seq data, we showed that the core regulatory modules can reflect the properties of different subpopulations of cells. Finally, the driver regulators are shown to be important in clarifying the relations between modules across adjacent time points. As a second example, our method on Ascl1-induced direct reprogramming from fibroblast to neuron time course data identified Id1/2 as driver regulators of early stage of reprogramming.