Aim/Purpose: This study investigates the factors that affect the post implementation success of a web-based learning management system at the University of Professional Studies, Accra (UPSA). Background: UPSA implemented an LMS to blend Web-based learning environment with the traditional methods of education to enable working students to acquire education. Methodology: An explanatory sequential mixed method was adopted, under the pragmatic paradigm, to investigate the level of acceptance of web-based learning by students. The effects of perceived usefulness, perceived ease of use, and other social factors were investigated. In all, 4500 final and third-year undergraduate students of UPSA made up the population. A sample size of 870 was used for this study. Contribution: This paper contributes to the body of knowledge by identifying the factors that hinder post-implementation of LMS at the tertiary level in Ghana and adds to the general literature available. Findings: The level of acceptance of LMS seems very low due to poor IT infrastructure, inadequate training, and the relevance of the system to quality lecture delivery. However, students’ intention to use LMS and the usefulness of LMS were perceived to be high, especially among students in higher levels. Recommendations for Practitioners: The authors recommend that IT infrastructure, especially reliable and fast internet connectivity, and adequate training should be provided. Recommendation for Researchers: Further research should be done to confirm if the provision of a more reliable internet system will boost students’ internet proficiency, which in turn will improve their utilisation of the LMS. Impact on Society: Help create awareness of schooling while pursuing a career and also improve interactions between students and lecturers. It will also improve enrolment and possibly reduce the cost of education in the long-run. Future Research: Researchers can look at the possibility of implementing total virtual learning systems at the tertiary level in Ghana.

Aim/Purpose: This work aims to present a knowledge modeling technique that supports the representation of the student learning process and that is capable of providing a means for self-assessment and evaluating newly acquired knowledge. The objective is to propose a means to address the pedagogical challenges in m-learning by aiding students’ metacognition through a model of a student with the target domain and pedagogy. Background: This research proposes a framework for social and meta-cognitive support to tackle the challenges raised. Two algorithms are introduced: the meta-cognition algorithm for representing the student’s learning process, which is capable of providing a means for self-assessment, and the social group mapping algorithm for classifying students according to social groups. Methodology : Based on the characteristics of knowledge in an m-learning system, the cognitive knowledge base is proposed for knowledge elicitation and representation. The proposed technique allows a proper categorization of students to support collaborative learning in a social platform by utilizing the strength of m-learning in a social context. The social group mapping and metacognition algorithms are presented. Contribution: The proposed model is envisaged to serve as a guide for developers in implementing suitable m-learning applications. Furthermore, educationists and instructors can devise new pedagogical practices based on the possibilities provided by the proposed m-learning framework. Findings: The effectiveness of any knowledge management system is grounded in the technique used in representing the knowledge. The CKB proposed manipulates knowledge as a dynamic concept network, similar to human knowledge processing, thus, providing a rich semantic capability, which provides various relationships between concepts. Recommendations for Practitioners: Educationist and instructors need to develop new pedagogical practices in line with m-learning. Recommendation for Researchers: The design and implementation of an effective m-learning application are challenging due to the reliance on both pedagogical and technological elements. To tackle this challenge, frameworks which describe the conceptual interaction between the various components of pedagogy and technology need to be proposed. Impact on Society: The creation of an educational platform that provides instant access to relevant knowledge. Future Research: In the future, the proposed framework will be evaluated against some set of criteria for its effectiveness in acquiring and presenting knowledge in a real-life scenario. By analyzing real student interaction in m-learning, the algorithms will be tested to show their applicability in eliciting student metacognition and support for social interactivity.

Aim/Purpose: Violations of Information Systems (IS) security policies continue to generate great anxiety amongst many organizations that use information systems, partly because these violations are carried out by internal employees. This article addresses IS security policy violations in organizational settings, and conceptualizes and problematizes IS security violations by employees of organizations from a paradox perspective. Background: The paradox is that internal employees are increasingly being perceived as more of a threat to the security of organizational systems than outsiders. The notion of paradox is exemplified in four organizational contexts of belonging paradox, learning paradox, organizing paradox and performing paradox. Methodology : A qualitative conceptual framework exemplifying how IS security violations occur as paradoxes in context to these four areas is presented at the end of this article. Contribution: The article contributes to IS security management practice and suggests how IS security managers should be positioned to understand violations in light of this paradox perspective. Findings: The employee generally in the process of carrying out ordinary activities using computing technology exemplifies unique tensions (or paradoxes in belonging, learning, organizing and performing) and these tensions would generally tend to lead to policy violations when an imbalance occurs. Recommendations for Practitioners: IS security managers must be sensitive to employees tensions. Future Research: A quantitative study, where statistical analysis could be applied to generalize findings, could be useful.

Aim/Purpose: This study aims to investigate the relationship between the knowledge management (KM) process and the performance of construction companies. The ultimate goal is to promote better efficiency and competitive advantage in the construction industry by making the best use of knowledge. Background: While attention to KM is currently on the rise, as shown by the number of studies conducted, research on KM in the construction industry of Indonesia is still very rare. However, organizational learning as the implementation of KM provides an opportunity to improve the construction industry, and thus there is an urgency to conduct research on this topic. Methodology: This study lasted for three months and used the survey method, with 100 questionnaires distributed to contractors of grade 6 and 7 on the islands of Java and Borneo in Indonesia. A total of 54 returned questionnaires were deemed complete and eligible for further analysis. Data analysis was performed using the structural equation modeling method with partial least squares (SEM PLS). Contribution: This study helps to measure the relationship value of the KM process and company performance. Findings: The results of this study indicate that the process of KM has a significant and positive influence on company performance, and there is a positive interaction in the process of KM and company performance as well. Recommendations for Practitioners: Construction companies need to perceive that activities undertaken in a construction project should always be assumed to be a KM process in order to make strategic and effective decisions that can result in improvements to customers, finance, internal business, learning, and growth. Recommendation for Researchers: Research on the KM process and information technology needs to be developed more, so that construction companies can apply this knowledge to explore problems and create solutions, resulting in methods to facilitate efficiency and effectiveness. Impact on Society: This paper helps to understand that KM activities provide initial benefits and guidance for companies that want to apply KM. Future Research: Innovative and new ideas to cultivate the KM process in the construction industry need to be explored and developed to improve the implementation.

Aim/Purpose: This explanatory study aimed to determine the mediating role of ERP in the relation between the effect of a socio-technical approach and decision-making environment, and firms’ sustainable performance. Background: Although earlier studies have discussed the critical success factors of the failure or success of an ERP system and the extent to which it achieves its desired objectives, the current study focused on the significant impact of socio-technical elements and decision-making environment on the success of the ERP system (i.e., sustainable performance). In addition, the lack of research on ERP as a mediator in the above relationship motivated this study to bridge the literature gap. Methodology: The data was collected using questionnaires distributed to 233 randomly selected employees of three multinational companies (BP, LUKOIL, and Eni) operating in Iraq. The structural equation modeling was employed to test the hypothesized relationships. Contribution: The study contributes to the literature by examining the mediating role of the ERP system in the relationship between socio-technical elements and the decision-making environment, as well as, the moderating role of organizational culture in the relationship between socio-technical elements and ERP systems. Findings: The results showed that ERP is a significant mediator between the linkage of socio-technical elements and the decision-making environment while organizational culture has an insignificant moderating role in the relationship between socio-technical elements and ERP systems. Recommendations for Practitioners: In a developing country like Iraq, there is a need to implement ERP to achieve better sustainable performance through change management and organizational development that ultimately work towards enhancing individual capabilities, knowledge, and training. Recommendation for Researchers: The researchers are recommended to conduct an in-depth study of the phenomenon based on theoretical and empirical grounds, particularly in light of the relationship of socio-technical elements and decision-making environments. Impact on Society: This study provides a reference for organizations with similar cultural backgrounds in using ERP systems to minimize pollution in Iraqi context. Future Research: A more in-depth study can be performed using a bigger sample, which not only includes the oil industry but also the other industries.

Aim/Purpose: This paper identifies the antecedents that affect E-Banking (EB) adoption and investigates the relationship between the level of EB adoption and the performance of private banks. Background: Rapid technological advancement has transformed the business environment dramatically. These advancements particularly the Internet has reshaped the way businesses operate. Over the last decade, the banking industry has become highly complex and competitive and operates in a highly volatile and unpredictable global economy. With the increasing demand for electronic services, banks are harnessing EB technology to improve their products and services. Methodology: Quantitative research using Structural Equation Modelling (SEM) was carried out with a sample size of 211 by sending questionnaires to employees of six banks in Khartoum, Sudan. The study is based on different technology theories and models. Contribution: The study provides insights into the employees’ perception of EB adoption in their banking transactions. Findings: The results showed that four factors are significant in the adoption of EB in Sudan. However, training and user trust were insignificant in determining its adoption. Moreover, the level of adoption of EB significantly affected private bank performance. Recommendations for Practitioners: Private banks in Sudan that are interested in EB might find these findings helpful in guiding their technology adoption and application initiatives. Recommendation for Researchers: To validate the research model, cross data from different countries are encouraged to apply the model to capture the differences and similarities among them. In addition, a longitudinal research could be conducted to gather data for adoption process over a longer period rather than one point of time, to investigate antecedents and bank performance outcomes by the end of the study period. Other antecedents and outcomes could possibly be included to improve the power of the study model. Impact on Society: This study provides a reference for banks with similar developing country backgrounds in adopting EB to enhance their performance. Moreover, knowledge of antecedents and outcomes of EB adoption could be positively reflected in service quality performance. Future Research: This research is limited to the employees’ perspective, and future research could consider the perception of customers from a developing country towards EB adoption.

Aim/Purpose: In this research, we examined the influence of the information system (IS) quality dimensions proposed by Wixom and Todd on reading satisfaction of online newspaper readers in Bangladesh, especially the readers’ intention to revisit and recommendations through electronic word-of-mouth (eWOM). Background: We identified the top 50 most visited websites, of which 13 were online newspapers, although their ranking among Bangladesh online newspapers varies from month to month. The literature illustrates that, despite the wide availability of online news portals and the fluctuations in frequency of visits, little is known about the factors that affect the satisfaction, word-of-mouth, and frequency of visits of readers. An understanding of reader satisfaction will help to gain richer insights into the phenomenon of readers’ intention to revisit and recommendation by eWOM. Stakeholders of online newspapers can then focus on those factors to increase visits to their websites, which will help them attract online advertisements from different organisations. Methodology: Data were collected using a structured questionnaire, from 217 people who responded to the survey. We used SmartPLS 3 to analyze the data collected, as it is based on second-generation analysis, which in turn is based on structural equation modeling (SEM). Contribution: This research explores the impacts of technological dimensions on readers’ satisfaction, as most of the previous research has focused on cultural or social dimensions. Findings: The results supported all of the hypothesized relationships between technological dimensions and reader satisfaction with online newspapers, except for one. The first, information, was predicted with accuracy and completeness, while the second object-based belief, system quality, was predicted by its accessibility, flexibility, reliability, and timeliness. Overall, quality factors influencing readers’ satisfaction were shown to lead to word-of-mouth revisit intentions. Our proposed model was empirically tested and has contributed to a nascent body of knowledge about readers’ revisit intentions and eWOM recommendations regarding online newspapers. It was also shown that strong satisfaction leads to higher revisit intention and eWOM. Recommendations for Practitioners: To keep the users satisfied, online newspapers need to focus on improving information quality (IQ) and system quality (SQ). If they do this well, they will be rewarded with higher revisit intention and recommendations by eWOM. Recommendation for Researchers: This study extends Oh’s customer loyalty model by integrating the Wixom-Todd model. This study reinforces an alternative rationale of the construct satisfaction. Future Research: We ignored negative stimulus like technostress, which can have an impact on satisfaction. In future, we will test the relationship between technostress and its impact on online newspaper reading.

Aim/Purpose: The objective of this study was to assess the interrelationships among knowledge management infrastructure, knowledge management process, intellectual capital, and organization performance. Background: Although knowledge management capability is extensively used by organizations, reaching their maximum financial and non-financial performances has not been fully researched. Therefore, organizations need to optimize their performance by exploiting knowledge management capability through the accumulation of intellectual capital, where the new competitiveness is shifting from tangible to intangible resources. Methodology: This study adopted a positivist philosophy and deductive approach to accomplish the main goal of this research. Moreover, this research employed a quantitative approach since this study is concerned with causal relationship between variables. A questionnaire-based survey was designed to evaluate the research model using a convenience sample of 134 employees from the food industry sector in Jordan. Surveyed data was examined following the structural equation modeling procedures. Contribution: This study highlighted the potential benefits of applying the knowledge management capabilities, intellectual capital, and organizational performance to the food industrial sector in Jordan. Future research suggestions are also provided. Findings: Results indicated that knowledge management infrastructure had a positive effect on knowledge management process. In addition, knowledge management process impacted positively intellectual capital and organization performance and mediated the relationship between knowledge management infrastructure and intellectual capital. However, knowledge management infrastructure did not positively associate to organization performance. Recommendations for Practitioners: The current model is designed to help managers and decision makers to improve their management capabilities as well as their organization financial and non-financial performance through exploiting the organizational knowledge management infrastructure and intellectual capital approaches. Recommendation for Researchers: Our findings can be used as a base of knowledge to conduct further studies about knowledge management capabilities, intellectual capital, and organization performance following different criteria and research procedures. Impact on Society: The designed model highlights a significant organizational performance approach that can influence Jordanian food industrial sector positively. Future Research: The current designed research model can be applied and assessed further in other sectors including banking and industrial sectors across developed and developing countries. Also, we suggest that in addition to focusing on knowledge management process and intellectual capital as mediating variables, future research could test our findings in a longitudinal study and examine how to affect financial and non-financial performance.

Aim/Purpose: This study analyzes the mechanism of Internet capability (IC) driving knowledge creation performance (KCP). We consider the mediating role of strategic flexibility and the moderating role of informatization density. Background: The key to achieving KCP for firms is to transform knowledge created into new products or services and to realize the economic benefits. However, the research has not paid enough attention to firms’ KCP. Based on dynamic capability theory, this study empirically reveals how firms drive KCP through Internet capability. Methodology: The study uses survey data from 399 organizations in China. Through structural equation modeling, this study assesses the relationship between Internet capability, strategic flexibility, and KCP and uses hierarchical regression to test the moderating role of informatization density. Contribution: First, this study expands research on knowledge creation and focuses on the further achievement of knowledge creation performance. The study also enriches the exploration of KCP in the Internet context and deepens the research on the internal mechanism by which Internet capability influences KCP. Second, this study highlights the important role of informatization density in the Internet context and expands the research on the impact of external factors on the internal mechanism. Findings: First, Internet capability has a significantly positive effect on both strategic flexibility and KCP. Furthermore, Internet capability directly impacts strategic flexibility, yet it affects KCP both directly and indirectly through strategic flexibility, which confirms that strategic flexibility is a partial mediator in the relationship between Internet capability and KCP. Second, strategic flexibility positively influences KCP. Third, informatization density has a significant moderating effect on the relationship between Internet capability and KCP. Recommendations for Practitioners: The results indicate that firms should consider the importance of Internet capability and strategic flexibility for KCP in the Internet context. This study also provides a theoretical basis that could guide the Chinese government’s informatization construction of the industrial chain. Recommendation for Researchers: Researchers could further explore the role of other mediator variables (e.g., business process management, organizational agility) and consider the role of other moderator variables (e.g., resource commitment, learning orientation). Impact on Society: This study provides a reference for enterprises with similar cultural backgrounds in using Internet capability to enhance their competitive advantage. Future Research: Future research could collect data from various countries and regions to test the research model and conduct longitudinal studies to increase the robustness of the conclusions.

Aim/Purpose: This study aims at (1) extending an existing theoretical framework to gain a deeper understanding of the technology acceptance process, notably of the Facebook social network in an unexplored Middle East context, (2) investigating the influence of social support theory on Facebook adoption outside the work context, (3) validating the effectiveness of the proposed research model for enhancing Facebook adoption, and (4) determining the effect of individual differences (gender, age, experience, and educational level) amongst Facebook users on the associated path between the proposed model constructs. Background: Social networking sites (SNSs) are widely adopted to facilitate social interaction in the Web-based medium. As such, this present work contends that there is a gap in the existing literature, particularly in the Middle East context, as regards an empirical investigation of the relationship between the social, psychological, individual, and cognitive constructs potentially affecting users’ intention to accept SNSs. The present research, therefore, attempts to address this deficit. The relevance of this work is also considered in light of the scarcity of empirical evidence and lack of detailed research on the effect of social support theory with regard to SNS adoption in a non-work context. Methodology: A quantitative research approach was adopted for this study. The corresponding analysis was carried out based on structural equation modelling (SEM), more specifically, partial least squares (PLS), using SmartPLS software. Earlier research recommended the PLS approach for exploratory studies when extending an existing model or developing a new theory. PLS is also a superior method of complex causal modelling. Moreover, a multi-group analysis technique was adopted to investigate the moderating influence of individual differences. This method divides the dataset into two groups and then computes the cause and effect relationships between the research model variables for each set. The analysis of an in-person survey with a sample of Facebook users (N=369) subsequently suggested four significant predictors of continuous Facebook use. Contribution: This study contributes to the body of knowledge relating to SNSs by providing empirical evidence of constructs that influence Facebook acceptance in the case of a developing country. It raises awareness of antecedents of Facebook acceptance at a time when SNSs are widely used in Arab nations and worldwide. It also contributes to previous literature on the effectiveness of the unified theory of acceptance and use of technology (UTAUT) in different cultural contexts. Another significant contribution of this study is that it has reported on the relevance of social support theory to Facebook adoption, with this theory demonstrating a significant and direct ability to predict Facebook acceptance. Finally, the present research identified the significant moderating effect of individual differences on the associated path between the proposed model constructs. This means that regardless of technological development, individual gaps still appeared to exist among users. Findings: The findings suggested four significant predictors of continuous Facebook use, namely, (a) performance expectancy, (b) peer support, (c) family support, and (d) perceived playfulness. Furthermore, behavioral intention and facilitating conditions were found to be significant determinants of actual Facebook use, while individual differences were shown to moderate the path strength between several variables in the proposed research model. Recommendations for Practitioners: The results of the present study make practical contributions to SNS organizations. For example, this research revealed that users do not adopt Facebook because of its usefulness alone; instead, users’ acceptance is developed through a sequence of variables such as individual differences, psychological factors, and social and organizational beliefs. Accordingly, social media organizations should not consider only strategies that apply to just one context, but also to other contexts characterized by different beliefs, perceptions, and cultures. Moreover, the evidence provided here is that social support theory has a significant influence on SNSs acceptance. This suggests that social media organizations should provide services to support this concept. Furthermore, the significant positive effect of perceived playfulness on the intention to use SNSs implied that designers and organizations should pay further attention to the entertainment services provided by social networks. Recommendation for Researchers: To validate the proposed conceptual framework, researchers from different countries and cultures are invited to apply the model. Moreover, a longitudinal research design could be implemented to gather data over a longer period, in order to investigate whether users have changed their attitudes, beliefs, perceptions, and intention by the end of the study period. Other constructs, such as individual experience, compatibility, and quality of working life could be included to improve the power of the proposed model. Impact on Society: Middle Eastern Facebook users regard the network as an important tool for interacting with others. The increasing number of Facebook users renders it a tool of universal communication and enjoyment, as well as a marketing network. However, knowledge of the constructs affecting the application of SNSs is valuable for ensuring that such sites have the various functions required to suit different types of user. Future Research: It is hoped that our future research will build on the results of this work and attempt to provide further explanation of why users accept SNSs. In this future research, the proposed research model could be adopted to explore SNSs acceptance in other developing countries. Researchers might also include other factors of potential influence on SNSs acceptance. The constructs influencing acceptance of other social networks could then be compared to the present research findings and thus, the differences and similarities would be highlighted.

Aim/Purpose: This study investigates the research profile of the papers published in Interdisciplinary Journal of Information, Knowledge, and Management (IJIKM) to provide silhouette information of the journal for the editorial team, researchers, and the audience of the journal. Background: Information and knowledge management is an interdisciplinary subject. IJIKM defines intersections of multiple disciplinary research communities for the interdisciplinary subject. Methodology: A quantitative study of categorical content analysis was used for a thematic analysis of IJIKM. One hundred fifty nine (159) papers published since the inauguration of the journal in 2006 were coded and analyzed. Contribution: The study provides synopsized information about the interdisciplinary research profile of IJIKM, and adds value to the literature of information and knowledge management. Findings: The analysis reveals that IJIKM disseminates research papers with a wide range of research themes. Among the research themes, Organizational issues of knowledge/information management, Knowledge management systems/tools, Information/knowledge sharing, Technology for knowledge/information management, Information/knowledge application represent the five main research streams of IJIKM. The total number of papers on organizational issues of knowledge/information management increased from 16% to 28% during the past 6 years. Statistical method was the most common research methodology, and summarization was the most common research design applied in the papers of IJIKM. The paper also presents other patterns of participant countries, keywords frequencies, and reference citations. Recommendations for Practitioners: Innovation is the key to information and knowledge management. Practitioners of information and knowledge management can share best practices with external sectors. Recommendation for Researchers: Researchers can identify opportunities of cross-disciplinary research projects that involve experts in business, education, government, healthcare, technology, and psychology to advance knowledge in information and knowledge management. Impact on Society: Information and knowledge management is still a developing field, and readers of this paper can gain more understanding of the dissemination of the literature of information and knowledge management involved in all relevant disciplines. Future Research: A longitudinal study could follow up in the future to provide updated and comparative information of the research profile of the journal.

Aim/Purpose: Two research objectives were addressed in this study. The first objective was to determine the effect of knowledge management orientation behaviour on business performance, and the second objective was to investigate the mediating effect of market orientation in the relationship between knowledge management orientation behaviour and business performance. Background: In business strategic perspective, the idea of knowledge management has been discussed widely. However, there is a lack of study exploring the notion of knowledge management orientation especially in the perspective of Indonesia’s creative economy sector. Methodology: One hundred and thirty one participants were involved in this study. They were economy creative practitioners in Indonesia. Data were analysed by using Partial Least Squares. Contribution: Upon the completion of the research objectives, this study contributes to both theoretical and practical perspectives. From a theoretical standpoint, this study proposes a conceptual model explaining the relationship among knowledge management orientation behaviour, market orientation, and business performance in Indonesia’s creative economy sector. As this study found a significant effect of knowledge sharing in market orientation and market orientation in business performance, the study showed the mediation role of market orientation in the relationship between knowledge sharing and business performance. From a practical perspective, this study implies a guideline for business practitioners in enhancing business through the application of knowledge management orientation behaviour. Findings: The results show that organizing memory, knowledge absorption, and knowledge receptivity has a direct significant effect on business performance. However, in affecting business performance, knowledge sharing must be mediated by market orientation. Recommendations for Practitioners: Based on the results of the study, practitioners should enhance their behaviour in implementing knowledge management in terms of increasing business performance. In addition, it is suggested that business practitioners must be market driven, as market orientation was found to have an important role in affecting business performance. Recommendation for Researchers: Future researchers might integrate other constructs such as innovation, marketing capabilities, or organizational learning with this current conceptual model to have more comprehensive insight about the relationship between knowledge management orientation and business performance. Impact on Society: This study suggests that business practitioners must have knowledge management driven behaviour as well as market orientation to enhance the performance of their business. Future Research: Future research might add other variables to make the conceptual model more comprehensive and also replicate this study into different industrial settings.

Aim/Purpose: The current study investigates the relationship between mobile and email marketing and consumer impulse buying tendencies in Pakistan. Background: Technology has become a primary driver for all business operations, which has dramatically transformed the wireless communications marketing paradigm. However, researchers have claimed that further inquiry is still needed to explore the role that distinct and emerging global technologies have on marketing communication strategies. This study explores the linkage of mobile and email marketing on consumers’ impulse buying behavior in Pakistan. Methodology: Primary data were collected through the distribution of 1000 questionnaires among students of different universities within two provinces of Pakistan: Punjab and Khyber Pakhton Khan (KPK). The study was conducted between November 2016 and March 2017. The authors received back 950 surveys, which is a very significant rate of return (95%). Of those submitted, 900 surveys were deemed eligible for analysis after improper documents were eliminated. Structure equation modeling (SEM) was utilized to test the study’s hypotheses. Contribution: This study assists organizations in improving marketing campaigns by focusing more on mobile devices (m-devices) and email medium to better comprehend consumers’ assessment processes at a lower budgetary cost. Such digital considerations could provide innovative possibilities for marketers in approaching their target market by adopting novel methods for information sharing. Findings: The findings revealed a positive association between mobile and email marketing on consumers’ impulse buying tendencies. The comprehensive analysis affirmed; however, there is a higher positive relationship of mobile marketing results compared to email marketing outcomes. There are favorable benefits in considering such emerging methods in marketing communications as promotional strategies are considered by organizations. Recommendations for Practitioners: Marketers are encouraged to evaluate the potential of using both emerging mediums to take advantage of consumer impulse buying habits where m-devices and emails approaches are utilized. Future Research: Future inquiries might examine the global influence of m-devices and email technology toward other buying tendencies of consumers: exploratory, online, variety seeking, habitual, and other emerging complex on-demand buying behavior.

Aim/Purpose: Vis-à-vis management of crisis and disaster situations, this paper focuses on important use cases of social media functions, such as information collection & dissemination, disaster event identification & monitoring, collaborative problem-solving mechanism, and decision-making process. With the prolific utilization of disaster-based ontological framework, a strong disambiguation system is realized, which further enhances the searching capabilities of the user request and provides a solution of unambiguous in nature. Background: Even though social media is information-rich, it has created a challenge for deriving a decision in critical crisis-related cases. In order to make the whole process effective and avail quality decision making, sufficiently clear semantics of such information is necessary, which can be supplemented through employing semantic web technologies. Methodology: This paper evolves a disaster ontology-based system availing a framework model for monitoring uses of social media during risk and crisis-related events. The proposed system monitors a discussion thread discovering whether it has reached its peak or decline after its root in the social forum like Twitter. The content in social media can be accessed through two typical ways: Search Application Program Interfaces (APIs) and Streaming APIs. These two kinds of API processes can be used interchangeably. News content may be filtered by time, geographical region, keyword occurrence and availability ratio. With the support of disaster ontology, domain knowledge extraction and comparison against all possible concepts are availed. Besides, the proposed method makes use of SPARQL to disambiguate the query and yield the results which produce high precision. Contribution: The model provides for the collection of crisis-related temporal data and decision making through semantic mapping of entities over concepts in a disaster ontology we developed, thereby disambiguating potential named entities. Results of empirical testing and analysis indicate that the proposed model outperforms similar other models. Findings: Crucial findings of this research lie in three aspects: (1) Twitter streams and conventional news media tend to offer almost similar types of news coverage for a specified event, but the rate of distribution among topics/categories differs. (2) On specific events such as disaster, crisis or any emergency situations, the volume of information that has been accumulated between the two news media stands divergent and filtering the most potential information poses a challenging task. (3) Relational mapping/co-occurrence of terms has been well designed for conventional news media, but due to shortness and sparseness of tweets, there remains a bottleneck for researchers. Recommendations for Practitioners: Though metadata avails collaborative details of news content and it has been conventionally used in many areas like information retrieval, natural language processing, and pattern recognition, there is still a lack of fulfillment in semantic aspects of data. Hence, the pervasive use of ontology is highly suggested that build semantic-oriented metadata for concept-based modeling, information flow searching and knowledge exchange. Recommendation for Researchers: The strong recommendation for researchers is that instead of heavily relying on conventional Information Retrieval (IR) systems, one can focus more on ontology for improving the accuracy rate and thereby reducing ambiguous terms persisting in the result sets. In order to harness the potential information to derive the hidden facts, this research recommends clustering the information from diverse sources rather than pruning a single news source. It is advisable to use a domain ontology to segregate the entities which pose ambiguity over other candidate sets thus strengthening the outcome. Impact on Society: The objective of this research is to provide informative summarization of happenings such as crisis, disaster, emergency and havoc-based situations in the real world. A system is proposed which provides the summarized views of such happenings and corroborates the news by interrelating with one another. Its major task is to monitor the events which are very booming and deemed important from a crowd’s perspective. Future Research: In the future, one shall strive to help to summarize and to visualize the potential information which is ranked high by the model.

Aim/Purpose: Despite the fact that the plethora of studies demonstrate the positive impact of information technology (IT) capabilities on SMEs performance, the understanding of underlying mechanisms through which IT capabilities affect the firm performance is not yet clear. This study fills these gaps by explaining the roles of absorptive capacity and corporate entrepreneurship. The study also elaborates the effect of IT capability dimensions (IT integration and IT alignment) upon the SMEs performance outcomes through the mediating sequential process of absorptive capacity and corporate entrepreneurship. Methodology: This study empirically tests a theoretical model based on the Dynamic Capability View (DCV), by using the partial least square (PLS) technique with a sample of 489 manufacturing SMEs in Pakistan. A survey is employed for the data collection by following the cluster sampling approach. Contribution: This research contributes to the literature of IT by bifurcating the IT capability into two dimensions, IT integration and IT alignment, which allows us to distinguish between different sources of IT capabilities. Additionally, our findings shed the light on the dynamic capability view by theoretically and empirically demonstrating how absorptive capacity and corporate entrepreneurship sequentially affect the firms' performance outcomes. At last, this study contributes to the literature of SMEs by measuring the two levels of performance: innovation performance and firm performance. Findings: The results of the analysis show that the absorptive capacity and the corporate entrepreneurship significantly mediate the relationship between both dimensions of IT capability and performance outcomes.

Aim/Purpose: This study investigates the relationship between knowledge sharing process and innovation success with specific emphasis on tacit knowledge. Based on the literature review, we hypothesised that knowledge donating and collecting have a positive relationship with innovation success. Methodology: The hypotheses were empirically tested using the partial least square path modelling with data collected from twelve state-owned public organisations operating in Southern Nigeria. Contribution: The research made distinct empirical contributions to the burgeoning literature on knowledge sharing and innovation from the public sector and developing country context. Findings: Knowledge donating and collecting contribute to innovation success positively and significantly. Knowledge donating effect on innovation success was found to be more significantly positive than the effect of knowledge collecting on innovation success. Recommendations for Practitioners: Public organisations should promote a supportive culture to spur innovation through the frequent share of experiences, information and skills among the various knowledge actors. Public managers should convey the importance of knowledge sharing and its value to knowledge users in clear terms and attend to creating conditions or contexts that encourage people to share knowledge freely and willingly with others. It is apt to improve organisational commitment and support for knowledge sharing activities such as mentorship programs, workshops, conferences, seminars and other related training and development programs in order to provide opportunities for employees to develop innovation competencies from the transfer of tacit knowledge developed over time from experience. To optimise innovation outcomes from knowledge sharing practices, knowledge sharing should be in tandem with the industry or global best practices. Future Research: Future studies should add interviews to provide depth in terms of insights and substance to the questionnaire, and may extend to public organisation with different ownership structure.

Aim/Purpose: This study empirically analyzed and examined the effectiveness of the online advocacy banners on customers’ reactions to make replacements with the similar products in their shopping carts. Background: When a product in a shopping cart is removed, it might be put back into the cart again during the same purchase or it may be bought in the future. Otherwise, it might be abandoned and replaced with a similar item based on the customer’s enquiry list or on the recommendation of banners. There is a lack of understanding of this phenomenon in the existing literature, pointing to the need for this study. Methodology: With a database from a Taiwanese e-retailer, data were the tracks of empirical webpage clickstreams. The used data for analyses were particularly that the products were purchased again or replaced with the similar ones upon the advocacy banners being shown when they were removed from customers’ shopping carts. Few pre-defined Apriori rules as well as similarity algorithm, Jaccard index, were applied to derive the effectiveness. Contribution: This study addressed a measurement challenge by leveraging the information from clickstream data – particularly clickstream data behavior. These data are most useful to observe the real-time behavior of consumers on websites and also are applied to studying click-through behavior, but not click-through rates, for web banners. The study develops a new methodology to aid advertisers in evaluating the effectiveness of their banner campaign. Findings: The recommending/advocating titles of “you probably are interested” and “the most viewed” are not significantly effective on saving back customers’ removed products or repurchasing similar items. For the banners entitled “most buy”, “the most viewed” might only show popularity of the items, but is not enough to convince them to buy. At the current stage on the host website, customers may either not trust in the host e-retailer or in such mechanism. Additionally, the advocating/recommending banners only are effective on the same customer visits and their effects fade over time. As time passes, customers’ impressions of these banners may become vague. Recommendations for Practitioners: One managerial implication is more effective adoption of advocacy/recommendation banners on e-retailing websites. Another managerial implication is the evaluation of the advocacy/recommendation banners. By using a data mining technique to find the association between removed products and restored ones in e-shoppers’ shopping carts, the approach and findings of this study, which are important for e-retailing marketers, reflect the connection between the usage of banners and the personalized purchase changes in an individual customer’s shopping cart. Recommendation for Researchers: This study addressed a new measurement which challenges to leverage the information from clickstream data instead of click-through rates – particularly retailing webpages browsing behavior. These data are most useful to observe the real-time behavior of consumers on websites and also are applied to studying click-through behavior. Impact on Society: Personalization has become an important technique that allows businesses to improve both sales and service relationships with their online customers. This personalization gives e-marketers the ability to deliver real effectiveness in the use of banners. Future Research: The effectiveness is time- and case-sensible. Business practitioners and academic researchers are encouraged to apply the mining methodology to longevity studies, specific marketing campaigns of advertising and personal recommendations, and any further recommendation algorithms.

Aim/Purpose: This study examines the influence of ambidextrous knowledge sharing in industrial clusters on innovation performance from the perspective of knowledge-based dynamic capabilities. Background: The key factor to improving innovation performance in an enterprise is to share knowledge with other enterprises in the same cluster and use dynamic capabilities to absorb, integrate, and create knowledge. However, the relationships among these concepts remain unclear. Based on the dynamic capability theory, this study empirically reveals how enterprises drive innovation performance through knowledge sharing. Methodology: Survey data from 238 cluster enterprises were used in this study. The sample was collected from industrial clusters in China’s Fujian province that belong to the automobile, optoelectronic, and microwave communications industries. Through structural equation modeling, this study assessed the relationships among ambidextrous knowledge sharing, dynamic capabilities, and innovation performance. Contribution: This study contributes to the burgeoning literature on knowledge management in China, an important emerging economy. It also enriches the exploration of innovation performance in the cluster context and expands research on the dynamic mechanism from a knowledge perspective. Findings: Significant relationships are found between ambidextrous knowledge sharing and innovation performance. First, ambidextrous knowledge sharing positively influences the innovation performance of cluster enterprises. Further, knowledge absorption and knowledge generation capabilities play a mediating role in this relationship, which confirms that dynamic capabilities are a partial mediator in the relationship between ambidextrous knowledge sharing and innovation performance. Recommendations for Practitioners: The results highlight the crucial role of knowledge management in contributing to cluster innovation and management practices. They indicate that cluster enterprises should consider the importance of knowledge sharing and dynamic capabilities for improving innovation performance and establish a multi-agent knowledge sharing platform. Recommendation for Researchers: Researchers could further explore the role of other mediating variables (e.g., organizational agility, industry growth) as well as moderating variables (e.g., environmental uncertainty, learning orientation). Impact on Society: This study provides a reference for enterprises in industrial clusters to use knowledge-based capabilities to enhance their competitive advantage. Future Research: Future research could collect data from various countries and regions to test the research model and conduct a comparative analysis of industrial clusters.

Aim/Purpose: The main purpose of this paper is to identify prosumers’ engagement in business process innovation through knowledge sharing. Background: In the increasingly competitive knowledge-based economy, companies must seek innovative methods of doing business, quickly react to consumer demand, and provide superior value to consumers. Simultaneously, contemporary consumers, named “prosumers”, want to be active co-creators of value and satisfy their consumption needs through collaboration with companies for co-creation, co-design, co-production, co-promotion, co-pricing, co-distribution, co-consumption, and co-maintenance. Consequently, consumer involvement in development and improvement of products and business process must be widely analyzed in various contexts. Methodology: The research is a questionnaire survey study of 388 prosumers in Poland and 76 in the UK. Contribution The contribution of this research is twofold. First, it identifies how prosumers can be engaged in business processes through knowledge sharing. Second, it investigates the differences between Poland- and UK-based prosumers in engagement in business process. Findings: The study found that prosumers are engaged in knowledge sharing at each stage of the business process innovation framework. However, there are differences in the types of processes that draw on prosumers’ engagement. Prosumers in Poland are found to engage mostly in the business process of developing and managing products, whereas prosumers in the UK engage mostly in the business process of managing customer services. Recommendations for Practitioners: This study provides practitioners with guidelines for engaging prosumers and their knowledge sharing to improve process innovation. Companies gain new insight from these findings about prosumers’ knowledge sharing for process innovation, which may help them make better decisions about which projects and activities they can engage with prosumers for future knowledge sharing and creating prospective innovations. Recommendations for Researchers: Researchers may use this methodology and do similar analysis with different samples in Poland, the UK, and other countries, for many additional comparisons between different groups and countries. Moreover, a different methodology may be used for identifying prosumers’ engagement and knowledge sharing for processes improvement. Future Research: This study examined prosumers’ engagement from the prosumers’ standpoint. Therefore prosumers’ engagement from the company perspective should be explored in future research.

Aim/Purpose: This study forms part of the World IT Project, which aims to gain a deeper understanding of individual, personal and organisational factors influencing IT staff in a modern, work environment. The project also aims to provide a global view that complements the traditional American/Western view. The purpose of this study is to investigate and report on some of these factors, in particular, the role that job satisfaction has in turnover intention (i.e., changing jobs within the IT industry) and turn-away intention (i.e., moving to another industry other than IT) in South Africa. Background: Several studies have reported on the importance of an employee’s job satisfaction to organisation success, and the various factors that influence it. Most studies on job satisfaction adopted a Westernised and not a global view. Very few empirical studies have been conducted on job satisfaction of IT workers in South Africa. This paper reports on the individual, personal and organisational factors that influence the job satisfaction of IT staff in South Africa. Methodology: The study uses statistical analysis of survey data acquired through the World IT Project. Both online and paper based questionnaires were used. A sample size of 301 respondents was obtained from the survey, which was conducted over a period of 6 months during 2017. The factors that influence IT job satisfaction were analysed using correlation analysis, multiple regression analysis and discriminant analysis. The factors investigated were employee and organisational demographics, aspects of occupational culture, and various job-related individual issues. Contribution: This paper presents the only study focused specifically on turnover and turn-away intention amongst IT staff in South Africa. The final proposed model, grounded in the empirical dataset, clearly shows job satisfaction as a strong mediating construct explaining most of the variance in the IT professional’s intention to leave the organisation (i.e. their turnover intention) and the industry (i.e. their turn-away intention). Findings: The findings revealed that there was a significant correlation between job satisfaction and turnover intention as well as between job satisfaction and turn-away intention of IT staff. Perceived professional self-efficacy, strain and experience were also highly correlated with turnover intention. Professional self-efficacy was also significantly correlated with turn-away intention. Based on the analyses that were conducted, a research model is presented that shows the relationships between the various antecedents of turnover and turn-away intention. Recommendations for Practitioners: Managers in organisations dealing with the shortage of IT skills can use the model to plan interventions to reduce IT staff turnover rates by focussing on addressing the identified individual issues such as strain, job (in)security and work load as well as the personal value and IT occupational culture issues. Recommendation for Researchers: Researchers in the field of IT staff recruitment and management can find value for their research in the proposed refined model of IT job satisfaction and turnover intention. Future research could possibly replicate the study in other countries or could focus on different factors. Impact on Society: IT skills play a crucial role in society today and are therefore in high demand. However, this demand is not being satisfied by the current rate of supply. Research into what factors influence IT staff to leave the organisation or the industry can assist managers with improving their employee relations and job conditions so as to reduce this turnover and increase organisations’ and society’s competitiveness and economic growth. Future Research: It would be interesting to determine if the findings are similar for a sample of smaller organisations and/or younger IT employees since this study focussed on larger organisations and more experienced staff. Future research could also compare the findings of South African organisations with those in other countries.

Aim/Purpose: In this article, we provide a better solution to Webpage access prediction. In particularly, our core proposed approach is to increase accuracy and efficiency by reducing the sequence space with integration of PageRank into CPT+. Background: The problem of predicting the next page on a web site has become significant because of the non-stop growth of Internet in terms of the volume of contents and the mass of users. The webpage prediction is complex because we should consider multiple kinds of information such as the webpage name, the contents of the webpage, the user profile, the time between webpage visits, differences among users, and the time spent on a page or on each part of the page. Therefore, webpage access prediction draws substantial effort of the web mining research community in order to obtain valuable information and improve user experience as well. Methodology: CPT+ is a complex prediction algorithm that dramatically offers more accurate predictions than other state-of-the-art models. The integration of the importance of every particular page on a website (i.e., the PageRank) regarding to its associations with other pages into CPT+ model can improve the performance of the existing model. Contribution: In this paper, we propose an approach to reduce prediction space while improving accuracy through combining CPT+ and PageRank algorithms. Experimental results on several real datasets indicate the space reduced by up to between 15% and 30%. As a result, the run-time is quicker. Furthermore, the prediction accuracy is improved. It is convenient that researchers go on using CPT+ to predict Webpage access. Findings: Our experimental results indicate that PageRank algorithm is a good solution to improve CPT+ prediction. An amount of though approximately 15 % to 30% of redundant data is removed from datasets while improving the accuracy. Recommendations for Practitioners: The result of the article could be used in developing relevant applications such as Webpage and product recommendation systems. Recommendation for Researchers: The paper provides a prediction model that integrates CPT+ and PageRank algorithms to tackle the problem of complexity and accuracy. The model has been experimented against several real datasets in order to show its performance. Impact on Society: Given an improving model to predict Webpage access using in several fields such as e-learning, product recommendation, link prediction, and user behavior prediction, the society can enjoy a better experience and more efficient environment while surfing the Web. Future Research: We intend to further improve the accuracy of webpage access prediction by using the combination of CPT+ and other algorithms.

Aim/Purpose: This paper examines the behavior of financial firm employees with regard to information security procedures instituted within their organization. Furthermore, the effect of information security awareness and its importance within a firm is explored. Background: The study focuses on employees’ attitude toward compliance with information security policies (ISP), combined with various norms and personal abilities. Methodology: A self-reported questionnaire was distributed among 202 employees of a large financial Corporation Contribution: As far as we know, this is the first paper to thoroughly explore employees’ awareness of information system procedures, among financial organizations in Israel, and also the first to develop operative recommendations for these organizations aimed at increasing ISP compliance behavior. The main contribution of this study is that it investigates compliance with information security practices among employees of a defined financial corporation operating under rigid regulatory governance, confidentiality and privacy of data, and stringent requirements for compliance with information security procedures. Findings: Our results indicate that employees’ attitudes, normative beliefs and personal capabilities to comply with firm’s ISP, have positive effects on the firm’s ISP compliance. Also, employees’ general awareness of IS, as well as awareness to ISP within the firm, positively affect employees’ ISP compliance. Recommendations for Practitioners: This study can help information security managers identify the motivating factors for employee behavior to maintain information security procedures, properly channel information security resources, and manage appropriate information security behavior. Recommendation for Researchers: Researchers can see that corporate rewards and sanctions have significant effects on employee security behavior, but other motivational factors also reinforce the ISP’s compliance behavior. Distinguishing between types of corporations and organizations is essential to understanding employee compliance with information security procedures. Impact on Society: This study offers another level of understanding of employee behavior with regard to information security in organizations and comprises a significant contribution to the growing knowledge in this area. The research results form an important basis for IS policymakers, culture designers, managers, and those directly responsible for IS in the organization. Future Research: Future work should sample employees from another type of corporation from other fields and should apply qualitative analysis to explore other aspects of behavioral patterns related to the subject matter.

Aim/Purpose: The clustering techniques are normally considered to determine the significant and meaningful subclasses purposed in datasets. It is an unsupervised type of Machine Learning (ML) where the objective is to form groups from objects based on their similarity and used to determine the implicit relationships between the different features of the data. Cluster Analysis is considered a significant problem area in data exploration when dealing with arbitrary shape problems in different datasets. Clustering on large data sets has the following challenges: (1) clusters with arbitrary shapes; (2) less knowledge discovery process to decide the possible input features; (3) scalability for large data sizes. Density-based clustering has been known as a dominant method for determining the arbitrary-shape clusters. Background: Existing density-based clustering methods commonly cited in the literature have been examined in terms of their behavior with data sets that contain nested clusters of varying density. The existing methods are not enough or ideal for such data sets, because they typically partition the data into clusters that cannot be nested. Methodology: A density-based approach on traditional center-based clustering is introduced that assigns a weight to each cluster. The weights are then utilized in calculating the distances from data vectors to centroids by multiplying the distance by the centroid weight. Contribution: In this paper, we have examined different density-based clustering methods for data sets with nested clusters of varying density. Two such data sets were used to evaluate some of the commonly cited algorithms found in the literature. Nested clusters were found to be challenging for the existing algorithms. In utmost cases, the targeted algorithms either did not detect the largest clusters or simply divided large clusters into non-overlapping regions. But, it may be possible to detect all clusters by doing multiple runs of the algorithm with different inputs and then combining the results. This work considered three challenges of clustering methods. Findings: As a result, a center with a low weight will attract objects from further away than a centroid with higher weight. This allows dense clusters inside larger clusters to be recognized. The methods are tested experimentally using the K-means, DBSCAN, TURN*, and IDCUP algorithms. The experimental results with different data sets showed that IDCUP is more robust and produces better clusters than DBSCAN, TURN*, and K-means. Finally, we compare K-means, DBSCAN, TURN*, and to deal with arbitrary shapes problems at different datasets. IDCUP shows better scalability compared to TURN*. Future Research: As future recommendations of this research, we are concerned with the exploration of further available challenges of the knowledge discovery process in clustering along with complex data sets with more time. A hybrid approach based on density-based and model-based clustering algorithms needs to compare to achieve maximum performance accuracy and avoid the arbitrary shapes related problems including optimization. It is anticipated that the comparable kind of the future suggested process will attain improved performance with analogous precision in identification of clustering shapes.

Aim/Purpose: This study examines the kind of community value companies should provide when strengthening the relationship between customers and brands through the establishment of an online brand community, and how this kind of community value promotes customers’ sense of community engagement and willingness to spread brand reputation. The paper also discusses how an enterprise’s brand symbolism affects the relationship between community value and customers’ engagement in online brand community. This study explored the important role of brand symbolism in the establishment of an online brand community. Background: Many companies want to create online brand communities to strengthen their relationships with consumers as well as to provide better service and value to consumers, for example, Huawei’s Huafen community (club.huawei.com), Apple’s support community (support.apple.com/zh-cn), and Samsung’s Galaxy community (samsungmembers.cn). However, these brand communities may have different interests and consumer engagement about the kind of community value to offer to their customers. Methodology: This study uses data collection from questionnaire surveys to design a quantitative research method. An online questionnaire survey of mobile phone users in China was conducted to collect data on social value, cognitive value, brand symbolism, customer community engagement, and brand recommendation. The brands of mobile phone include Apple, Huawei, Samsung, OPPO, VIVO, MI, and Meizu. The researcher purchased a sample service of WJX, an online survey company (www.wjx.cn), and WJX company distributed the questionnaire to research participants. The WJX company randomly selected 240 subjects from their sample database and then sent the questionnaire link to research participants’ mobile phones. Among the 240 research participants, the researcher excluded participants who lacked online brand community experience or had invalid data to qualify for data collection. After the researcher excluded participants who did not qualify for data collection, only 203 qualified questionnaire surveys advanced to the data collection and analysis phase, which was the questionnaire recovery rate of 84.58%. For the model analysis and hypotheses testing, the researcher used statistical software IBM SPSS Statistics and AMOS 21 and Smartpls3. Contribution: This study deepens the body of literature knowledge by combining online brand community value and brand symbolic value to explore issues that companies should consider when establishing an online brand community for their products and services. This study confirms that brands with high symbolic value establish communities and strengthen social values in the online brand community rather than reducing brand symbolism. Online brand community involves a horizontal interaction (peer interaction) among peers, which can have an effect on the symbolic value of brand (social distance). Findings: First, online brand community value (both cognitive and social value) has a positive impact on customer community engagement. Second, customer community engagement has a positive impact on customers’ brand recommend intention. Third, the customer community engagement is a mediator between the online brand community value and the customer brand recommend intention. Most importantly, fourth, the symbolic value of the brand controls the relationship between community value and customer community engagement. For brands with high symbolic value, the community value should emphasize cognitive value rather than social value. For brands with a low symbolic value, the community provides cognitive or social value, which is not affected by the symbolism of the brand. Recommendations for Practitioners: Practitioners can share best practices with the corporate sectors. Brand owners can work with researchers to explore the characteristics of their online brand communities. On this basis, brand owners and researchers can jointly build and manage online brand communities. Recommendation for Researchers: Researchers can explore different perspectives and factors of brand symbolism that involve brand owners when establishing an online brand community to advance consumer engagement, community value, and brand symbolism. Impact on Society: Online brand community is relevant for brand owners to establish brand symbolism, community value, and customer engagement. Readers of this paper can gain an understanding that cognitive and social values are two important drivers of individual participation in online brand communities. The discussion of these two factors can give readers and brand owners the perception to gain more understanding on social and behavior activities in online brand communities. Future Research: Practitioners and researchers could follow-up in the future with a study to provide more understanding and updated research information from different perspectives of research samples and hypotheses on online brand community.

Aim/Purpose: This study investigates social media use and its effect on knowledge sharing. Based on the review of related literature, we hypothesised that social media use has a significant effect on outward and inward knowledge sharing. Background: While the notion of social media use in work organisations has been progressively developed, empirical studies linking social media to the context of knowledge sharing have only begun to emerge. Even so, literature on social media use and its impact on public organisation is still tentative and remains a developing area. Methodology: The partial least square method was utilised in testing of hypotheses with data collected from 103 employees, who by virtue of their position and job function(s) interface with the public for the purpose of sharing knowledge via the social media space. Contribution: The study made contributions to the social knowledge management literature in two ways. First, the study developed a research model that links social media use to the two distinct dimensions of knowledge sharing. Second, the study provides a quantitative approach, where statistical techniques were applied to validate the social media use and knowledge sharing link. Findings: Statistically, the public organisations utilise social media partly for knowledge sharing, with its effect being significant on outward knowledge sharing and insignificant on inward knowledge sharing. This indicates that social media were deployed mainly for information dissemination “outward knowledge sharing” and not for stakeholders’ feedback and interaction “inward knowledge sharing”. Recommendations for Practitioners: Public organisations should develop a policy framework and guidelines for social media use to encourage the full use of this technology to inform and interact with stakeholders. It is important for this policy document to adopt best practices regarding interactive spaces so that both knowledge sharing dimensions manifest themselves in social media communications. Second, it is necessary to carry out staff training for the professional use of this technology for knowledge sharing. Recommendation for Researchers: Future studies should extend to more populations in different contexts to validate findings Impact on Society: This paper intends to influence practices adopted by organisations in the public sector to improve the knowledge sharing dimensions via the social media space. Future Research: Future studies may extend to public organisations in other geographical locations around Nigeria. It will be useful for studies to provide an international perspective by sampling public organisations from different countries or by comparing and contrasting the findings of other studies, specifically those from other countries. A longitudinal study should be encouraged to detect advancement or development with regards to the subject matter over a period of time.

Aim/Purpose: Based on the social exchange theory, this study aimed to explore the underlying mechanisms and boundary conditions between organizational socialization and knowledge sharing. Background: With the advent of the era of the knowledge economy, knowledge has been replacing traditional resources such as capital, labor, and land to become the critical resources of enterprises. The competitiveness of an organization depends much on the effectiveness of its knowledge management; the success of its knowledge management largely relies upon employees’ motivation and willingness to engage in knowledge sharing. Methodology: This study is a longitudinal analysis of data collected from 281 newcomers in Chinese enterprises at two-time points with a one-month interval. Structural equation modeling (SEM) was conducted to test hypotheses by calculating standardized path coefficients and their significance levels. Contribution: The study examined models linking organizational socialization and knowledge sharing that included organizational links and sacrifice as mediators and trust as a moderator. Findings: Results show that the influences of organizational socialization on knowledge sharing change regularly over time. In the role management stage, coworker support and prospects for the future impact the practices of knowledge sharing through links and sacrifice. Moreover, the findings show that trust moderates the effect of links and sacrifice on employees’ knowledge sharing. Recommendations for Practitioners: This study can help enterprises develop targeted human resource management strategies, improve the degree of job embeddedness within the organization, and thus encourage more knowledge sharing among employees. Recommendation for Researchers: First, researchers could pay attention to more underlying mechanisms and boundary conditions in the relationship between organizational socialization and knowledge sharing. Second, focusing on specific cultural context and dimension of concepts may provide a new insight for the future study and help add greater theoretical precision to knowledge sharing. Impact on Society: First, this study suggests that coworker support and prospects for the future improve knowledge sharing within the organization. Second, understanding how job embeddedness (organizational links and organizational sacrifice) acts as a mediator enhancing knowledge sharing, managers should consider raising their attachment relationship to organizations from two aspects: links and sacrifice. Third, knowledge sharing takes place in a team-oriented context, where the success of the team requires high-quality relationships among individual team members within the team as a whole. Future Research: Researchers in the future should employ experimental research design or utilize longitudinal data to ensure that the findings reveal causation. In addition, future research can investigate how the initial level and later changes of organizational socialization are associated with knowledge sharing beyond the observational scope of traditional cross-sectional and lagged research designs.

Aim/Purpose: The purpose of this study is to investigate the mechanism of the front/back-office structure affecting new service development (NSD) performance and examine the role of knowledge transfer in the relationship between front/back-office structure and NSD. Background: The separation of front and back-office has become the prevailing trend of the organizational transformation of modern service enterprises in the digital era. Yet, the influence of front and back-office separation dealing with new service development has not been widely researched. Methodology: Building on the internal social capital perspective, a multivariate regression analysis was conducted to investigate the impact of front/back-office structure on the NSD performance through knowledge transfer as an intermediate variable. The data was collected through a survey questionnaire from 198 project-level officers in the commercial banking industry of China. Contribution: This study advances the understanding of front/back-office structure’s influence mechanism on new service development activity. It reveals that knowledge transfer plays a critical role in bridging the impact of front and back-office separation to NSD performance under the trend of digitalization of service organizations. Findings: This study verified the positive effects of front/back-office social capital on NSD performance. Moreover, knowledge transfer predicted the variation in NSD performance and fully mediated the effect of front/back-office social capital on NSD performance. Recommendations for Practitioners: Service organizations should optimize knowledge transfer by promoting the social capital between front and back-office to overcome the negative effect organizational separation brings to NSD. Service and other organizations could explore developing an internal social network management platform, by which the internal social network could be visualized and dynamically managed. Recommendation for Researchers: The introduction of information and communications technology not only divides the organization into front and back-office, but also reduces the face-to-face customer contact. The impacts of new forms of customer contact to new service development and knowledge transfer between customer and service organizations call for further research. Along with the digital servitization, some manufacturing organizations also separate front and back-offices. The current model can be applied and assessed further in manufacturing and other service sectors. Impact on Society: The conclusion of this study guides us to pay attention to the construction of social capital inside organizations with front/back-office structure and implicates introducing and developing sociotechnical theory in front/back-office issue undergoing technological revolution. Future Research: As this study is based on the retail banking industry, similar studies are called upon in other service sectors to identify differences and draw more general conclusions. In addition, as the front and back-offices are being replaced increasingly by information technology such as artificial intelligence (AI), it is necessary to advance the research on front/back-office research with a new theoretical perspective, such as sociotechnical theory.

Aim/Purpose: This study aimed to investigate the impact of innovation management and learning orientation as the mechanisms playing the role of an intermediate relationship between entrepreneurial leadership and organisational performance of small and medium enterprises (SMEs) in Kuwait. Background: SMEs are currently among the principal economic instruments in most industrialised and developing countries. The contribution of SMEs can be viewed from various perspectives primarily related to the crucial role they play in developing entrepreneurial activities, employment generation, and improving innovativeness. Developing countries, including Kuwait and other countries, in the Gulf Cooperation Council (GCC), have recognised the key role played by SMEs as a strong pillar of growth. Consequently, many governments have formulated policies and programmes to facilitate the growth and success of SMEs. Unfortunately, the organisational performance of SMEs in developing countries, particularly in Kuwait, remains below expectations. The lagged growth could be due to a lack of good managerial practices and increasing competition that negatively impact their performance. Numerous researchers discovered the positive effect of entrepreneurial leadership on SMEs’ performance. However, a lack of clarity remains regarding the direct impact of entrepreneurial leadership on SMEs’ performance, especially in developing countries. Therefore, the nexus between entrepreneurial leadership and organisational performance is still indecisive and requires further studies. Methodology: This study adopted a quantitative approach based on a cross-sectional survey and descriptive design to gather data within a specific period. The data were collected by distributing a survey questionnaire to Kuwaiti SMEs’ owners and Chief Executive Officers (CEOs) via online and on-hand instruments. A total of 384 useable questionnaires were obtained. Moreover, the partial least square-structural equation modelling (PLS-SEM) analysis was performed to test the hypotheses. Contribution: The current study contributed to the existing literature by developing a moderated mediation model integrating entrepreneurial leadership, innovation management, and learning orientation. The study also investigated their effect on the organisational performance of SMEs. The study findings also bridged the existing significant literature gap regarding the role of these variables on SMEs’ performance in developing countries, particularly in Kuwait, due to the dearth of studies linking these variables in this context. Furthermore, this study empirically confirmed the significant effect of innovation management and learning orientation as intermediate variables in strengthening the relationship between entrepreneurial leadership and organisational performance in the settings of Kuwait SMEs, which has not been verified previously. Findings: The study findings showed the beneficial and significant impact of entrepreneurial leadership and innovation management on SME’s organisational performance. The relationship between entrepreneurial leadership and SMEs’ organisational performance is fundamentally mediated by innovation management and moderated by learning orientation. Recommendations for Practitioners: The present study provides valuable insights and information regarding the factors considered by the government, policymakers, SMEs’ stakeholders, and other authorities in the effort to increase the organisational performance level and facilitate the growth of SMEs in Kuwait. SMEs’ owners or CEOs should improve their awareness and knowledge of the importance of entrepreneurial leadership, innovation management, and learning orientation. These variables will have beneficial effects on the performance and assets to achieve success and sustainability if adopted and managed systematically. This study also recommends that SMEs’ entrepreneurs and top management should facilitate supportive culture by creating and maintaining an organisational climate and structure that encourages learning behaviour and innovation mindset among individuals. The initiative will motivate them towards acquiring, sharing, and utilising knowledge and increasing their ability to manage innovation systemically in all production processes to adapt to new technologies, practices, methods, and different circumstances. Recommendation for Researchers: The study findings highlighted the mediating effect of innovation management on the relationship between entrepreneurial leadership (the independent variable) and SMEs’ organisational performance (the dependent variable) and the moderating effect of learning orientation in the same nexus. These relationships were not extensively addressed in SMEs of developing countries and require further validation. Impact on Society: This study aims to influence the management strategies and practices adopted by entrepreneurs and policymakers who work in SMEs in developing countries. The effect will be reflected in the development of their firms and the national economy in general. Future Research: Future research should investigate the conceptual research framework against the backdrop of other developing economies and in other business settings to generalise the results. Future investigation should seek to establish the effect of entrepreneurial leadership style on other mechanisms, such as knowledge management processes, which could function with entrepreneurial leadership to improve SMEs’ performance efficiently. In addition, future studies may include middle and lower-level managers and employees, leading to more positive outcomes.

Aim/Purpose: The main aim of this study is to identify the factors that influence the continuance intention of use of innovative systems by non-academic employees of a private university and associated academic institutions in Bangladesh. Background: The targeted academic institutions have introduced many new online services aimed at improving students’ access to information and services, including a new online library, ERP or online forum, and the jobs-tracking system (JTS). This research is focused only on the JTS for two reasons. First, it is one of the most crucial systems for the Daffodil Family, as it enables efficient working across many institutes spread across the country and abroad. Second, it is employed in a wide variety of organisational institutes, not just the university. This study aims to discover negative factors that lead to a decrease in users’ intentions to continue using the system. The ultimate goal is to improve the motivation among administrative staff to use technology-related innovation by reducing or eliminating the problems. Methodology: G* power analysis was employed to determine the expected sample size. A questionnaire survey was conducted of 211 users of a new job tracking system from a private university in Bangladesh, to collect data for testing the suggested research model. The data was analysed using the structural equation technique, which is a powerful multivariate analysis mechanism. Contribution: This research contributes to the body of literature and helps better understand users’ continuance intention in the post-implementation phase of the JTS. It complements the micro-level examinations of continuance intention of using IT, by building on our understanding of the phenomenon at the individual level. Specifically, this study examines the role of technostress where organisations invest in IT to make their users more comfortable with innovative and new technologies like the JTS. Findings: This research develops a theoretical advancement of the expectation-confirmation theory, with implications for IT managers and senior management dealing with IT-related behaviour. All proposed hypotheses were supported. Specifically, the predictors of exhaustion – work overload, work–life balance, and role ambiguity – are significant. The core factors for satisfaction, perceived usefulness, and confirmation, are also found to be significant. Finally, satisfaction and exhaustion significantly influence continuance intention, in both positive and negative ways. Recommendations for Practitioners: This study gives an idea about some of the difficulties that people face when implementing new and innovative IT, particularly in academia in Bangladesh. It offers insights into strategies the management may want to follow when implementing new technology like the JTS. This study suggests strategies to increase satisfaction and reduce technostress among new users to enhance organisational support for change. Recommendation for Researchers: Methodologically, the study provides researchers about the technique that reduces the threat of the common method bias. First, it created a psychological separation between criterion and predictor variables. Second, the threat of common method variance was actively controlled by modelling a latent method factor and by using marker variables that researchers can use in their work. This study complements the micro-level examinations of continuance intention of using IT by building on our understanding of the phenomenon at the individual level. Researchers can extend this model by integrating other theories. Impact on Society: The findings of the study indicate that work overload, work–life conflict, and role ambiguity create tiredness, leading to lower user satisfaction with the system. Perceived usefulness and confirmation have an increasingly similar effect on users’ satisfaction with the system and their subsequent continuance intention. These findings tell university administrators what measures they should take to improve continuance intention of using innovative technology. Future Research: Future studies could conceptualise a five-factor personality model from the personal perspective of users. This model can also be extended by including the dimensions of absorptive capacity, i.e., the dynamic capabilities of users. Absorptive capacity of understanding, assimilating, and applying might influence the user’s perception of usefulness and confirmation of using JTS.

Aim/Purpose: The study attempts to analyse the influences of knowledge management capacity on company performance and supply chain practices. It also examines whether supply chain practices significantly and positively impact company performance. Background: Knowledge management capacity is an essential tactical resource that enables the integration and coordination among supply chain stakeholders, but research examining the link between knowledge management capacity and supply chain practices and their impacts on company performance remains scarce. Methodology: The study uses correlation analysis and factor analysis to confirm the theoretical framework’s validity and structural equation modelling to test hypotheses. The data are obtained from 115 halal food firms in China (with a response rate of 82.7%). Contribution: This study’s findings contribute to the Social Capital Theory by presenting the impacts of different supply chain practices on company performance. The findings also suggest the impact of intangible resources on enhancing company performance, contributing to the Resource-based View Theory. These results are a crucial contribution to both academicians and corporate managers working in the Halal food industry. Managers can apply these findings to discover and adopt knowledge management capacity with practical anticipation that these concepts will align with their company strategies. Also, the research motivates managers to concentrate their knowledge management on enhancing companies’ supply chain practices to achieve improved company performance. Findings: This study is an initial effort that provides empirical evidence regarding the relationships among supply chain, knowledge management, and company performance from the perspective of China’s halal food industry. The results prove that knowledge management capacity is the supply chains’ primary success determinant and influencer. Besides, knowledge management capacity positively influences company performance, and supply chain practices directly influence company performance. Recommendations for Practitioners: Managers can apply these study findings to determine and increase knowledge management capacity with practical anticipation that these concepts will align with their company strategies. Also, the research motivates managers to concentrate their knowledge management on enhancing companies’ supply chain practices to achieve improved company performance. Recommendation for Researchers: The study presents a new theoretical framework and empirical evidence for surveying halal food businesses in China. Impact on Society: These results are a significant contribution to the research field and industry focusing on halal foods. Future Research: First, this research focuses only on halal food businesses in China; thus, it is essential to re-examine the hypothesized relations between the constructs in other Chinese business segments and regions. Next, the effect of variables and practices on the theorized framework should be taken into account and examined in other industries and nations.

Aim/Purpose: The aim of this study is to determine the variables which affect the intention to use Near Field Communication (NFC)-enabled smart wearables (e.g., smartwatches, rings, wristbands) payments. Background: Despite the enormous potential of wearable payments, studies investigating the adoption of this technology are scarce. Methodology: This study extends the Technology Acceptance Model (TAM) with four additional variables (Perceived Security, Trust, Perceived Cost, and Attractiveness of Alternatives) to investigate behavioral intentions to adopt wearable payments. The moderating role of gender was also examined. Data collected from 311 Kuwaiti respondents were analyzed using Structural Equation Modeling (SEM) and multi-group analysis (MGA). Contribution: The research model provided in this study may be useful for academics and scholars conducting further research into m-payments adoption, specifically in the case of wearable payments where studies are scarce and still in the nascent stage; hence, addressing the gap in existing literature. Further, this study is the first to have specifically investigated wearable payments in the State of Kuwait; therefore, enriching Kuwaiti context literature. Findings: This study empirically demonstrated that behavioral intention to adopt wearable payments is mainly predicted by attractiveness of alternatives, perceived usefulness, perceived ease of use, perceived security and trust, while the role of perceived cost was found to be insignificant. Recommendations for Practitioners: This study draws attention to the importance of cognitive factors, such as perceived usefulness and ease of use, in inducing users’ behavioral intention to adopt wearable payments. As such, in the case of perceived usefulness, smart wearable devices manufacturers and banks enhance the functionalities and features of these devices, expand on the financial services provided through them, and maintain the availability, performance, effectiveness, and efficiency of these tools. In relation to ease of use, smart wearable devices should be designed with an easy to use, high quality and customizable user interface. The findings of this study demonstrated the influence of trust and perceived security in motivating users to adopt wearable payments, Hence, banks are advised to focus on a relationship based on trust, especially during the early stages of acceptance and adoption of wearable payments. Recommendation for Researchers: The current study validated the role of attractiveness of alternatives, which was never examined in the context of wearable payments. This, in turn, provides a new dimension about a determinant factor considered by customers in predicting their behavioral intention to adopt wearable payments. Impact on Society: This study could be used in other countries to compare and verify the results. Additionally, the research model of this study could also be used to investigate other m-payments methods, such as m-wallets and P2P payments. Future Research: Future studies should investigate the proposed model in a cross-country and cross-cultural perspective with additional economic, environmental, and technological factors. Also, future research may conduct a longitudinal study to explain how temporal changes and usage experience affect users’ behavioral intentions to adopt wearable payments. Finally, while this study included both influencing factors and inhibiting factors, other factors such as social influence, perceived compatibility, personal innovativeness, mobility, and customization could be considered in future research.

Aim/Purpose: This paper aimed to examine the impact of learning orientation on organizational performance of small and medium enterprises (SMEs) via the mediating role of total quality management (TQM) practices and the moderating role of innovation culture. Background: SMEs’ organizational performance in developing countries, particularly in Kuwait, remains below expectation due to increasing competition and inadequate managerial practices that negatively impact their performance. Although several studies had revealed a significant effect of learning orientation on SMEs’ performance, the direct impact of learning orientation on their performance is still unclear. Thus, the link between learning orientation and organizational performance remains inconclusive and requires further examination. Methodology: This study adopted a quantitative approach based on a cross-sectional survey and descriptive design to gather the data in a specific period. The data were collected by distributing a survey questionnaire to the owners and Chief Executive Officers (CEOs) of Kuwaiti SMEs using online and on-hand instruments with 384 useable data obtained. Furthermore, the partial least square-structural equation modeling (PLS-SEM) analysis was performed to test the hypotheses. Contribution: This study bridged the significant gap in the role of learning orientation on SMEs’ performance in developing countries, specifically Kuwait. In this sense, a conceptual model was introduced, comprising a learning orientation, TQM practices, innovation culture, and organizational performance. In addition, this study confirmed the significant influence of TQM practices and innovation culture as intermediate variables in strengthening the relationship between learning orientation and organizational performance, which has not yet been verified in Kuwait. Findings: The results in this study revealed that learning orientation had a significant impact on organizational performance of SMEs in Kuwait. It could be observed that TQM practices play an important role in mediating the relationship between learning orientation and performance of SMEs, as well as that innovation culture plays an important moderating role in the same relation. Recommendations for Practitioners: This study provided a framework for the decision-makers of SMEs on the significant impact of the antecedents that enhanced the level of organizational performance. Hence, owners/CEOs of SMEs should improve their awareness and knowledge of the importance of learning orientation, TQM practices, and innovation culture since it could significantly influence their performance to achieve success and sustainability when adopted and managed systematically. The CEOs should also consider building an innovation culture in the internal environment, which enables them to transform new knowledge and ideas into innovative methods and practices. Recommendation for Researchers: The results in this study highlighted the mediating effect of TQM practices on the relationship between learning orientation (the independent variable) and organizational performance (the dependent variable) of SMEs and the moderating effect of innovation culture in the same nexus. These relationships were not extensively addressed in SMEs and thus required further validation. Impact on Society: This study also influenced the management strategies and practices adopted by entrepreneurs and policymakers working in SMEs in developing countries, which is reflected in their development and the national economy. Future Research: Future studies should apply the conceptual framework of this study and assess it further in other sectors, including large firms in developing and developed countries, to generalize the results. Additionally, other mechanisms should be introduced as significant antecedents of SMEs’ performance, such as market orientation, technological orientation, and entrepreneurial orientation, which could function with learning orientation to influence organizational performance effectively.

Aim/Purpose: The aim of this study is to develop a research model derived from relevant literature to guide empirical efforts. Background: Companies struggle to innovate, which is essential for improving their performance, surviving in competition, and growing. A number of studies have discussed company innovation capability, stating that innovation capability is influenced by several variables such as cooperation and knowledge management. Therefore, further research is necessary to identify factors playing a role in enhancing innovation capability. Methodology: This study is based on systematic literature review. The stages are: (1) research scope review, (2) comprehensive online research, (3) journal quality assessment, (4) data extraction from journals, (5) journal synthesis, and (6) comprehensive report. The online research used Google Scholar database, by browsing titles, abstracts, and keywords to locate empirical research studies in peer-reviewed journals published in 2010-2020. Furthermore, 62 related articles were found, of which 38 articles were excluded from further analysis and 24 articles were selected because they were more related to the topic. Contribution: The results of this study enrich the research in the field of knowledge management, cooperation, and innovation capability by developing a conceptual framework of innovation capability. The proposed theoretical model may be fundamental in addressing the need of a research model to guide further empirical efforts. Findings: This study provides a research model derived from systematically reviewing relevant literature. The proposed theoretical model was done by incorporating the aspects of knowledge management, cooperation, and innovation capability. The model shows that knowledge management and cooperation are essential aspects of innovation capability. Furthermore, this study also provides the dimensions and sub dimensions of each variable that was established after synthesizing the literature review. Recommendations for Practitioners: Business practitioners can use the identified predictors of innovation capability and the dimensions of each variable to explore their company’s innovation capability. They can also take the relevant variables into consideration when making policies regarding innovation. Recommendation for Researchers: The theoretical model proposed in this study needs validation with further empirical investigation. Impact on Society: Readers of this paper can obtain an understanding that knowledge management and cooperation are essential aspects to consider in enhancing innovation capability. Future Research: Future studies should explore other dimensions of knowledge management and cooperation through alternative approaches and perspectives.

Aim/Purpose: The need to explore leaders’ role as a mediating factor between knowledge sharing and firms’ competitiveness was the focus of this paper. Further, gaps related to knowledge sharing influence on firms’ competitiveness from an emerging economy perspective was a major driver of this study. Background: The relevance of knowledge sharing is today crucial for firms that seek to harness internal resource innovation towards ensuring increased competitiveness. The link between the actions of leaders and outcomes from sharing knowledge towards increased competitiveness would further advance theory on knowledge sharing and provide managerial implication that is instrumental for an improved organisational outcome. Methodology: The study sample was 282 participants and Partial least square structural equation model was used for the analysis of the data obtained through a questionnaire survey with the aid of SmartPLSv3.9. Contribution: The study contributes to knowledge management literature through advancing leadership as a mediating factor that accounts for the link between knowledge sharing and firms’ competitiveness, most especially from an emerging economy perspective. Findings: Knowledge sharing was found to have a positive effect on firms’ competitiveness. The study found that leadership behaviour mediates the relationship between knowledge sharing and a firm’s competitiveness. Recommendations for Practitioners: The study recommends that, when supported with the right attitude from leaders in the organisation, knowledge sharing will be beneficial towards the firm gaining competitiveness most especially. Future Research: Future studies should be carried out in other sectors aside from the manufacturing sector using the same measures used to measure knowledge sharing. Also, a comparative analysis of knowledge sharing and firms’ competitiveness using leaders’ behaviour as a mediator should be researched in other developing economies.

Aim/Purpose: The first goal is to develop a decision support system for pricing and production amounts for a firm facing high levels of product returns. The second goal is to improve the management of the product returns process. Background: This study was conducted at a food importer and manufacturer in Israel facing a very high rate of product returns, much of which is eventually discarded. The firm’s products are commonly considered to be a low-cost generic alternative and are therefore popular among low-income families. Methodology: A decision support module was added to the plant’s business information system. The module is based on a supply chain pricing model and uses the sales data to infer future demand’s distribution. Ergonomic models were used to improve the design of the returns warehouse and the handling of the returns. Contribution: The decision support system allows to improve the plant’s pricing and quantity planning. Consequently, it reduced the size of product returns. The new design of the returns process is expected to improve worker’s productivity, reduces losses and results in safer outcomes. This study also demonstrates a successful integration and of a theoretical economical model into an information system. Findings: The results show the promise of incorporating pricing supply chain models into informing systems to achieve a practical business task. We were able to construct actual demand distributions from the data and offer actual pricing recommendations that reduce the number of returns while increasing potential profits. We were able to identify key deficiencies in the returns operations and added a module to the decisions support system that improves the returns management and links it with the sales and pricing modules. Finally, we produced a better warehouse design that supports efficient and ergonomic product returns handling. Recommendations for Practitioners: This work can be replicated for different suppliers, manufacturers and retailers that suffer from product returns. They will benefit from the reduction in returns, as well as the decrease in the losses associated with these returns. Recommendation for Researchers: It is worthwhile to research whether decision support systems can be applied to other aspects of the organizations’ operations. Impact on Society: Product returns is a lose-lose situation for producers, retailers and customers. Moreover, mismanagement of these returns is harmful for the environment and may result in the case of foods, in health hazards. Reducing returns and improving the handling improves sustainability and is beneficial for society. Future Research: The decision support system’s underlying pricing model assumes a specific business setting. This can be extended using other pricing models and applying them in a similar fashion to the current application.

Aim/Purpose: 5G and IoT are two path-breaking technologies, and they are like wall and climbers, where IoT as a climber is growing tremendously, taking the support of 5G as a wall. The main challenge that emerges here is to secure the ecosystem created by the collaboration of 5G and IoT, which consists of a network, users, endpoints, devices, and data. Other than underlying and hereditary security issues, they bring many Zero-day vulnerabilities, which always pose a risk. This paper proposes a security solution using network slicing, where each slice serves customers with different problems. Background: 5G and IoT are a combination of technology that will enhance the user experience and add many security issues to existing ones like DDoS, DoS. This paper aims to solve some of these problems by using network slicing and implementing an Intrusion Detection System to identify and isolate the compromised resources. Methodology: This paper proposes a 5G-IoT architecture using network slicing. Research here is an advancement to our previous implementation, a Python-based software divided into five different modules. This paper’s amplification includes induction of security using pattern matching intrusion detection methods and conducting tests in five different scenarios, with 1000 up to 5000 devices in different security modes. This enhancement in security helps differentiate and isolate attacks on IoT endpoints, base stations, and slices. Contribution: Network slicing is a known security technique; we have used it as a platform and developed a solution to host IoT devices with peculiar requirements and enhance their security by identifying intruders. This paper gives a different solution for implementing security while using slicing technology. Findings: The study entails and simulates how the IoT ecosystem can be variedly deployed on 5G networks using network slicing for different types of IoT devices and users. Simulation done in this research proves that the suggested architecture can be successfully implemented on IoT users with peculiar requirements in a network slicing environment. Recommendations for Practitioners: Practitioners can implement this solution in any live or production IoT environment to enhance security. This solution helps them get a cost-effective method for deploying IoT devices on a 5G network, which would otherwise have been an expensive technology to implement. Recommendation for Researchers: Researchers can enhance the simulations by amplifying the different types of IoT devices on varied hardware. They can even perform the simulation on a real network to unearth the actual impact. Impact on Society: This research provides an affordable and modest solution for securing the IoT ecosystem on a 5G network using network slicing technology, which will eventually benefit society as an end-user. This research can be of great assistance to all those working towards implementing security in IoT ecosystems. Future Research: All the configuration and slicing resources allocation done in this research was performed manually; it can be automated to improve accuracy and results. Our future direction will include machine learning techniques to make this application and intrusion detection more intelligent and advanced. This simulation can be combined and performed with smart network devices to obtain more varied results. A proof-of-concept system can be implemented on a real 5G network to amplify the concept further.

Aim/Purpose: This study examines the impact of transitioning from in-person classrooms to remote online business education and provides analysis of key factors impacting course and instructor ratings as well as strategies for higher education institutions to provide engaging instruction. Background: “Zoom”ing into teaching and moving out of traditional classrooms during the COVID-19 pandemic has been a path full of twists and has impacted student perceptions of courses as well as instructors. One challenge has been to make the quality of synchronous online instruction perceived by students as positive as classroom-delivered ones. Methodology: We analyze primary data collected in the course evaluation process from Business & Accounting students over six semesters between Fall 2019 to Spring 2022, covering pre-pandemic instruction in the classroom and the conversion to virtual instruction via Zoom. A total of 1782 observations for 38 courses were examined using mean comparison, regression and correlation analyses, and pairwise comparisons. Contribution: We provide insights from the evaluation of those instructors who were able to make their Zoom-delivered courses perceived by students as equivalent or better than room-delivered ones. Specifically, clear presentation, stimulating delivery, providing feedback and encouraging discussion were positively correlated with successful online classes. Findings: We find that there is a clear downward shift in course and instructor ratings as the change to synchronous online delivery was made. However, in the Spring of 2022, even though instructors and students were still not completely back in the classroom, both instructor and course ratings moved back closer to the pre-pandemic levels. The parameters associated with instructor ratings, such as providing feedback, clear presentations, stimulating sessions, and encouraging discussion, showed similar downward fluctuations. Also, aspects related to course content were affected by the transition to online modality, including training on critical thinking quantitative analysis, research and writing abilities, and overall usefulness of the content. Moore’s model of Transactional Distance helps explain these changes. Recommendations for Practitioners: We recommend that practitioners allow sufficient time for students and faculty to learn through online instruction delivery and supply training for both populations in adapting to learning in this delivery mode. Recommendation for Researchers: The disruption in higher education caused by COVID-19 has provided a wealth of information on the pluses and minuses of online delivery. Careful inspection of trends can help provide guidance to higher education leaders. Impact on Society: One of the many changes the COVID-19 pandemic brought was the opportunity to try alternate ways of connecting and learning. This study shows how this experience can be used to guide the future of higher education. Future Research: Further research is needed to explore the in-depth reactions of students and faculty to the switch from classroom to online delivery, to explore whether these findings can be more broadly applied to other subjects and other types of universities.

Aim/Purpose: This study investigated a model of mobile esports acceptance among urban citizens based on an extended Technology Acceptance Model (TAM). Background: Currently, esports are increasingly popular and in demand by the public. Supported by the widespread development of mobile devices, it has become an interactive market trend to play games in a new model, mobile esports. Methodology: This study collected data from 400 respondents and analyzed it using partial least squares-structural equation modeling (PLS-SEM). Contribution: This study addresses two research gaps. The first gap is limited esports information systems studies, particularly in mobile esports acceptance studies. The second gap is limited exploration of external variables in online gaming acceptance studies. Thus, this study proposed a TAM extended model by integrating the TAM native variables with other external variables such as visual appeal, enjoyment, social interaction, and competition to explore mobile esports acceptance by urban citizens. Findings: Nine hypotheses were accepted, and four were rejected. The visual appeal did not affect the acceptance. Meanwhile, social interaction and enjoyment significantly affected both perceived ease of use and usefulness. However, perceived ease of use surprisingly had an insignificant effect on attitude toward using mobile esports. Moreover, competition significantly affected the acceptance, particularly on perceived usefulness. Recommendations for Practitioners: Fresh and innovative features, such as new game items or themes, should be frequently introduced to enhance players’ continued enjoyment. Moreover, mobile esports providers should offer a solid platform to excite players’ interactions to increase the likelihood that users feel content. On the other hand, the national sports ministry/agency or responsible authorities should organize many esports competitions, big or small, to search for new talents. Recommendation for Researchers: Visual appeal in this study did not influence the perceived ease of use or usefulness. However, it could affect enjoyment. Thus, it would be worth revisiting the relationship between visual appeal and enjoyment. At the same time, perceived ease of use is a strong driver for the continued use of most online games, but not in this study. It could indicate significant differences between mobile esports and typical online games, one of which is the different purposes. Users might play online games for recreational intention, but players would use mobile esports to compete, win, or even get monetary rewards. Therefore, although users might find mobile esports challenging and hard to use, they tend to keep playing it. Thus, monetary rewards could be considered a determinant of the continuation of use. Impact on Society: Nowadays, users are being paid for playing games. It also would be an excel-lent job if they become professional esports athletes. This study investigated factors that could affect the continued use of mobile esports. Like other jobs, playing games professionally in the long term could make the players tedious and tired. Therefore, responsible parties, like mobile esports providers or governments, could use the recommendations of this study to promote positive behavior among the players. They will not feel like working and still con-sider playing mobile esports a hobby if they happily do the job. In the long run, the players could also make a nation’s society proud if they can be a champion in prestigious competitions. Future Research: A larger sample size will be needed to generalize the results, such as for a nation. It is also preferable if the sample is randomized systematically. Future works should also investigate whether the same results are acquired in other mobile esports. Furthermore, to extend our knowledge and deepen our understanding of the variables that influence mobile esports adoption, the subsequent research could look at other mobile esports acceptability based on characteristics of system functionality and moderator effects. Finally, longitudinal data-collecting approaches are suggested for future studies since behavior can change over time.

Aim/Purpose: The aim of this study is to identify Critical Success Factors (CSF) of Business Intelligence (BI) and provide a framework to classify CSF into layers or perspectives using an enterprise architecture approach, then rank CSF within each perspective and evaluate the importance of each perspective at different BI maturity levels as well. Background: Although the implementation of the BI project has a significant impact on creating analytical and competitive capabilities, the lack of evaluation of CSF holistically is still a challenge. Moreover, the BI maturity level of the organization has not been considered in the BI implementation project. Identifying BI critical success factors and their importance can help the project team to move to a higher maturity level in the organization. Methodology: First, a list of distinct CSF is identified through a literature review. Second, a framework is provided for categorizing these CSF using enterprise architecture. Interviewing is the research method used to evaluate the importance of CSF and framework layers with two questionnaires among experts. The first questionnaire was done by Analytical Hierarchy Process (AHP), a quantitative method of decision-making to calculate the weight of the CSF according to the importance of CSF in each of the framework layers. The second one was conducted to evaluate framework layers at different BI maturity levels using a Likert scale. Contribution: This paper contributes to the implementation of BI projects by identifying a comprehensive list of CSF in the form of a holistic multi-layered framework and ranking the importance of CSF and layers at BI maturity levels. Findings: The most important CSF in BI implementation projects include senior management support, process identification, data quality, analytics quality, hardware quality, security standards, scope management, documentation, project team skills, and customer needs transformation, which received the highest scores in framework layers. In addition, it was observed that as the organization moves to higher levels of maturity, the average importance of strategic business and security perspectives or layers increases. But the average importance of data, applications, infrastructure, and network, the project management layers in the proposed framework is the same regardless of the level of business intelligence maturity. Recommendations for Practitioners: The results of this paper can be used by academicians and practitioners to improve BI project implementation through understanding a comprehensive list of CSF and their importance. This awareness causes us to focus on the most important CSF and have better planning to reach higher levels of maturity according to the maturity level of the organization. Future Research: For future research, the interaction of critical success factors of business intelligence and framework layers can be examined with different methods.

Aim/Purpose: The main goal of this systematic literature review was to look for studies that provide information relevant to business intelligence’s (BI) framework development and implementation in the tourism sector. This paper tries to classify the tourism sectors where BI is implemented, group various BI functionalities, and identify common problems encountered by previous research. Background: There has been an increased need for BI implementation to support decision-making in the tourism sector. Tourism stakeholders such as management of destination, accommodation, transportation, and public administration need a guideline to understand functional requirements before implementation. This paper addresses the problem by comprehensively reviewing the functionalities and issues that need to be considered based on previous business intelligence framework development and implementation in tourism sectors. Methodology: We have conducted a systematic literature review using the Preferred Reporting Items for Systematic Reviews and Guidelines for Meta-Analysis (PRISMA) method. The search is conducted using online academic database platforms, resulting in 543 initial articles published from 2002 to 2022. Contribution: The paper could be of interest to relevant stakeholders in the tourism industry because it provides an overview of the capabilities and limitations of business intelligence for tourism. To our knowledge, this is the first study to identify and classify the BI functionalities needed for tourism sectors and implementation issues related to organizations, people, and technologies that need to be considered. Findings: BI functionalities identified in this study include basic functions such as data analysis, reports, dashboards, data visualization, performance metrics, and key performance indicator, and advanced functions such as predictive analytics, trend indicators, strategic planning tools, profitability analysis, benchmarking, budgeting, and forecasting. When implementing BI, the issues that need to be considered include organizational, people and process, and technological issues. Recommendations for Practitioners: As data is a major issue in BI implementation, tourism stakeholders, especially in developing countries, may need to build a tourism data center or centralized coordination regulated by the government. They can implement basic functions first before implementing more advanced features later. Recommendation for Researchers: We recommend further studying the BI implementation barriers by employing a perspective of an adoption framework such as the technology, organization, and environment (TOE) framework. Impact on Society: This research has a potential impact on improving the tourism industry’s performance by providing insight to stakeholders about what is needed to help them make more accurate decisions using business intelligence. Future Research: Future research may involve collaboration between practitioners and academics in developing various BI architectures specific to each tourism industry, such as destination management, hospitality, or transportation.

Aim/Purpose: This study examined the relationship between critical success factors (CSFs), perceived benefits, and usage intention of Mobile Knowledge Management Systems (MKMS) via an integrated Technology Acceptance Model (TAM) and Information Systems Success Model (ISSM). Background: This study investigates the CSFs (i.e., Strategic Leadership, Employee Training, System Quality, and Information Quality) that impact the usage intention of KMS in mobile contexts which have been neglected. Since users normally consider the usefulness belief in a system before usage, this study examines the role of perceived benefits as a mediator between the CSFs and usage intention. Methodology: A survey-based research approach in the Malaysian semiconductor industry was employed via an integrated model of TAM and ISSM. At a response rate of 59.52%, the findings of this study were based on 375 usable responses. The data collected was analyzed using the Partial Least Squares with SmartPLS 3.0. Contribution: This study contributes to the body of knowledge in the areas of mobile technology acceptance and knowledge management. Specifically, it helps to validate the integrated model of TAM and ISSM with the CSFs from knowledge management and information system. In addition, it provides the would-be adopters of MKMS with valuable guidelines and insights to consider before embarking on the adoption stage. Findings: The findings suggest that Employee Training and Information Quality have a positive significant relationship with Perceived MKMS Benefits. On the contrary, Strategic Leadership, System Quality, and Perceived User-friendliness showed an insignificant relationship with Perceived MKMS Benefits. Additionally, Employee Training and Information Quality have an indirect relationship with MKMS Usage Intention which is mediated by Perceived MKMS Benefits. Recommendations for Practitioners: The findings are valuable for managers, engineers, KM practitioners, KM consultants, MKMS developers, and mobile device producers to enhance MKMS usage intention. Recommendation for Researchers: Researchers would be able to conduct more inter-disciplinary studies to better understand the relevant issues concerning both fields – knowledge management and mobile computing disciplines. Additionally, the mediation effect of TAM via Perceived Usefulness (i.e., perceived MKMS benefits) on usage intention of MKMS should be further investigated with other CSFs. Future Research: Future studies could perhaps include other critical factors from both KM and IS as part of the external variables. Furthermore, Perceived Ease of Use (i.e., Perceived User-friendly) should be tested as a mediator in the future, together with Perceived Usefulness (i.e., perceived MKMS Benefits) to compare which would be a more powerful predictor of usage intention. Moreover, it may prove interesting to find out how the research framework would fit into other industries to verify the findings of this study for better accuracy and generalizability.

Aim/Purpose: This study examines the impact of decision-making, crisis management, and decision-making on sustainability through the mediation of open innovation in the energy sector. Background: Public companies study high-performance practices, requiring overcoming basic obstacles such as financial crises that prevent the adoption and development of sustainability programs. Methodology: Due to the COVID-19 pandemic, which has led to the closure of businesses in Iraq, a survey was distributed. To facilitate responses, free consultations were offered to help complete the questionnaire quickly. Of the 435 questionnaires answered, 397 were used for further analysis. Contribution: The impact of crises that impede the energy sector from adopting sustainable environmental regulations is investigated in this study. Its identification of specific constraints to open innovation leads to the effectiveness of adopting environmentally friendly policies and reaching high levels of sustainable performance. Findings: The impacts of risk-taking, crisis management, and decision-making on sustainability have been explored. Results show that open innovation fully mediates the relationship between the factors of risk-taking, crisis management, decision-making, and sustainability. Recommendations for Practitioners: The proposed model can be used by practitioners to develop and improve sustainable innovation practices and achieve superior performance. Recommendation for Researchers: Researchers are recommended to conduct in-depth studies of the phenomenon based on theoretical and empirical foundations, especially in light of the relationship between crisis management, decision-making, and risk-taking and their impact on sustainability based on linear and non-compensatory relationships. Impact on Society: This study provides a reference for organizations with similar cultural backgrounds in adopting sustainable practices to minimize pollution in the Iraqi context. Future Research: A more in-depth study can be performed using a larger sample, which not only includes the energy industry but also other industries.

Aim/Purpose: This study aims to examine the roles of key traits of m-university services and their users in promoting two crucial post-adoption outcomes of these services; namely, continuance usage intention and perceived value. Background: M-university (i.e., a university providing services via mobile technologies) has gained a great interest in the higher education sector as a driver of new business models and innovative service offerings. However, its assessment has been greatly overlooked, especially in evaluating the factors that drive the stakeholders’ continuance intention to use it and the determinants of its post-adoption perceived value. Consequently, research efforts undertaking such assessment facets empirically are highly required. Methodology: An integrated research model that enables such assessment was developed and evaluated using a quantitative research methodology. Accordingly, data were collected using a formulated closed-ended survey questionnaire. The target population consisted of the academic staff of a Saudi public university that has witnessed an extensive adoption of m-university services. The obtained data (i.e., 207 fully completed responses) were evaluated using the structural equation modeling approach. Contribution: To the best of our knowledge, this is the first study that gains the chance to provide the research community and m-service providers with new knowledge and understanding about the predictors that drive the continuance usage intention and value of m-university services. Findings: The findings showed that all of the examined traits of m-university services and their users (i.e., reliability, usability, customization, self-efficacy, and involvement) are having positive roles in promoting the continuance intention to use these services, while only two traits (i.e., reliability and involvement) contribute significantly to augmenting the perceived value. Recommendations for Practitioners: The study recommends developing effective design and implementation specifications that strengthen the contributions of the examined traits in the post-adoption stage of m-university services. Recommendation for Researchers: Further studies should be devoted to addressing the notable need to assess the factors influencing the adoption of m-university services, as well as to explore which ones are having significant roles in the attainment of post-adoption outcomes. Impact on Society: The empirical insights provided by the present study are essential for both university stakeholders and mobile service providers in their endeavors to improve the key aspects of the anticipated post-adoption outcomes of the provided services. Future Research: Further empirical investigations are needed to examine the roles of more m-university services and user traits in achieving a broad range of post-adoption outcomes of such services.

Aim/Purpose: Mobile commerce adoption is low in developing countries; hence, public servants may not consider mobile commerce and mobile payments. Understanding the factors that influence mobile commerce and mobile payments in their context will aid in promoting those services. Background: The study investigates the factors that influence public servants’ mobile commerce and mobile payments in Ghana. Hence, it provides some understanding of the various aspects of mobile commerce and mobile payments adoption, such as acceptance, use, and eventual adoption into the user’s daily life, and how that affects their behaviour. Methodology: The research was conducted by surveying the factors influencing public servants’ adoption of mobile commerce and payments in Ghana. A cross-sectional survey was undertaken to put the research model to the test to measure the constructs and their relationships. Contribution: The study confirmed previous findings and created a new conceptual model for mobile commerce and mobile payment adoption and usage in the Ghanaian context. Findings: The variables of performance expectancy, trust, and facilitating conditions have a significant positive influence on behavioural intention. The factors of effort expectation and social influence have a significant negative impact. Price value and perceived reliability are latent variables that do not affect behavioural intention. Behavioural intention and facilitating conditions significantly influence the actual use behaviour of mobile commerce and mobile payment users. Recommendations for Practitioners: Mobile commerce is emerging as a new mode of transactions, with firms providing enabling platforms for users. Mobile commerce could become the most acceptable application for the next generation of mobile platform applications. This study offers insights into the fluidity of the mobile environment, with implications that spell out what will be effective mobile commerce services that will continue to be relevant. Mobile applications are attractive to people because they provide a better user experience. These mobile applications have been optimised to provide a fast, easy and delightful experience. Mobile commerce and mobile payment service providers can attract and retain more users if attention is paid to performance expectancy, trust, and facilitating conditions since they influence individuals’ decisions to adopt. Mobile technology is almost ubiquitous, influencing both online sales and in-store sales. With the right mobile commerce platform and features, businesses can expect to increase in-store and online sales, catering to a more extensive clientele. Mobile devices are the primary means that most customers use to look up information about products they see in stores, such as product reviews and pricing options. This study indicates that mobile commerce service providers can achieve a more extensive customer base by promoting performance expectancy, trust, and behavioural intentions. Recommendation for Researchers: Despite the numerous studies in the mobile commerce literature, few have used integrated models of perceived reliability, trust, and price value or methods to evaluate these factors in the emerging mobile commerce industry. Also, it combines mobile commerce and mobile payments, which very few that we know of have done. Impact on Society: Ghana is already in a cash-lite economy. Thus, the study is appropriate with the result of trust being a significant factor. It implies that people will begin using mobile commerce and mobile payments with a bit of drive to bring about this drive quickly. Future Research: Future research could further test the adapted model with moderating factors of age, gender, and education to delve deeper into the complexities of mobile commerce and mobile payments.

Aim/Purpose: This research aims to analyze the effect of human resource management on humanitarian operations performance, using humanitarian organizations in Malaysia as a case. Background: Humanitarian organizations need to develop and continue effective on-the-job human resource management, such as training and development and managing employee performance to enhance the performance of their humanitarian operations. Methodology: The sampling technique that was conducted is probability sampling. In particular, the technique is called stratified sampling. This technique is chosen because it is involving the division of a population into a smaller group, called “strata”. The questionnaire survey was distributed to humanitarian organizations in Malaysia to collect research data, and PLS-SEM analysis was conducted to validate the conceptual model. Contribution: This research focuses on the effect of human resource management on humanitarian operations performance in humanitarian organizations with consistent training to ensure successful humanitarian operations. Findings: The results of PLS-SEM analysis confirmed that Training and Employee Development, Recruitment and Employee Selection, and Communicative Management Style are significantly correlated with humanitarian operations performance, giving 75.7% variations which means that these human resource management are critical factors for increasing humanitarian operations performance in Malaysian humanitarian organizations. Recommendations for Practitioners: This research will enhance humanitarian operations performance for humanitarian organizations, in-line policies outlined under the Malaysia National Security Council Directive No. 20, and benefit the field of disaster management. Recommendation for Researchers: This research can be used by the authorized individual involved in humanitarian operations to satisfy the needs of the victims, which ultimately contributes to the performance of these humanitarian organizations. Impact on Society: This research highlighted the human resource management that is vital for humanitarian organizations, which will increase humanitarian operations performance in an organization. Future Research: This study is conducted in the context of humanitarian organizations in Malaysia. It is unclear whether the key findings of this study can be generalized. Therefore, it is suggested that, in future research, the current research model should be extended to include different countries for validation.

Aim/Purpose: Systematic literature reviews seek to locate all studies that contain material of relevance to a research question and to synthesize the relevant outcomes of those studies. The primary aim of this paper was to synthesize both research and practice reports on micro-credentials (MCRs). Background: There has been an increase in reports and research on the plausibility of MCRs to support dynamic human skills development for an increasingly impatient and rapidly changing digital world. The integration of fast-paced emerging technologies and digitalization necessitate alternative learning paradigms. MCRs offer time, financial, and space flexibility and can be stacked into a larger qualification, thereby allowing for a broader range of transdisciplinary competencies within a qualification. However, MCRs often lack the academic rigor required for accreditation within existing disciplines. Methodology: The study followed the PRISMA framework (Preferred Reporting Items for Systematic Reviews and Meta Analyses), which offers a rigorous method to enhance reporting quality. The study used both academic research and practice reports. Contribution: The paper makes a theoretical contribution to the discourse about the need for innovation within existing educational paradigms for continued relevance in a changing world. It also contributes to the debate on the role of MCRs in bridging the gap between practice and academia despite the growing difference between their interests, and the role that MCRs play in the social-economic plans of countries. Findings: The key findings are that investments in MCRs are mainly in the Science, Technology, Engineering and Mathematics (STEM) and Education sectors, and have taken place mainly in high-income countries and regions – contexts that particularly value practice-accredited MCRs. Low-income countries, by contrast, remain traditional and insist on MCRs that are formally accredited by a recognized academic institution. This contributes to a widening skills gap between low- and high-income countries or regions, which results in greater global disparities. There is also a growing divide between academia and practice concerning their interest in MCRs (a reflection of the rigor versus relevance debate), which partially explains why many global and larger organizations have gone on to create their own learning institutions. Recommendations for Practitioners: We recommend that educational mechanisms consider the critical importance of MCRs as part of innovative efforts for life-wide (different sectors) and life-long (same sector) learning, especially in low-income countries. MCRs provide dynamic mechanisms to fill skills gaps in an increasing ruthless international battle for talent. Recommendation for Researchers: We recommend focused research into skills and career pathways using MCRs while at the same time remaining responsive to transdisciplinary efforts and sensitive to global and local changes within any sector. Impact on Society: Work and society have transformed over time, and more so in the new digital age, yet academia has been slow in adapting to the changes, forcing organizations to create their own learning institutions or to use MCRs to fill the skills gap. The purpose of education goes beyond preparing individuals for work, extending further to creating an environment where individuals and governments seek their own social and economic outcomes. MCRs provide a flexible means for co-creation between individuals, education, organizations, and government that could stem global rising unemployment, social exclusion, and redundancy. Future Research: Future research should focus on the co-creation of MCRs between practitioners and academia.

Aim/Purpose: The aim of this paper is to examine the influences of KM-centred strategies on innovation capability among Malaysian R&D firms. It also deepens understanding of the pathways and conditions to improve the innovation capability by assessing the mediating role of both KM practices, i.e., knowledge exploration practices, and knowledge exploitation practices. Background: Knowledge is the main organisational resource that is able to generate a competitive advantage through innovation. It is a critical success driver for both knowledge exploration and exploitation for firms to achieve sustainable competitive advantages. Methodology: A total of 320 questionnaires were disseminated to Malaysian R&D firms and the response rate was 47 percent. The paper utilised structural equation modelling and cross-sectional design to test hypotheses in the proposed research model. Contribution: This paper provides useful information and valuable initiatives in exploring the mediating role of knowledge exploration and knowledge exploitation in influencing innovation in Malaysian R&D firms. It helps R&D firms to frame their KM activities to drive the capability of creating and retaining a greater value onto their core business competencies. Findings: The findings indicate that all three KM-centred strategies (leadership, HR practices, and culture) have a direct effect on innovation. In addition, KM exploration practices mediate HR practices on innovation while KM exploitation mediates both leadership and HR practices on innovation. Recommendations for Practitioners: This paper serves as a guide for R&D managers to determine the gaps and appropriate actions to collectively achieve the desired R&D results and national innovation. It helps R&D firms frame their KM activities to enhance the capability of creating and retaining a greater value to their core business competencies. Recommendation for Researchers: This paper contributes significantly to knowledge management and innovation research by establishing new associations among KM-centred strategies, i.e., leadership, HR practices, and culture, both KM practices (knowledge exploration and knowledge exploitation), and innovation. Impact on Society: This paper highlights the important role of knowledge leaders and the practice of effective HR practices to help R&D firms to create a positive environment that facilitates both knowledge exploration and knowledge exploitation in enhancing innovation capabilities. Future Research: Further research could use a longitudinal sample to examine relationships of causality, offering a more comprehensive view of the effect of KM factors on innovation over the long term. Future research should also try to incorporate information from new external sources, such as customers or suppliers.

Aim/Purpose: This paper aims to analyze the availability and pricing of perishable farm produce before and during the lockdown restrictions imposed due to Covid-19. This paper also proposes machine learning and deep learning models to help the farmers decide on an appropriate market to sell their farm produce and get a fair price for their product. Background: Developing countries like India have regulated agricultural markets governed by country-specific protective laws like the Essential Commodities Act and the Agricultural Produce Market Committee (APMC) Act. These regulations restrict the sale of agricultural produce to a predefined set of local markets. Covid-19 pandemic led to a lockdown during the first half of 2020 which resulted in supply disruption and demand-supply mismatch of agricultural commodities at these local markets. These demand-supply dynamics led to disruptions in the pricing of the farm produce leading to a lower price realization for farmers. Hence it is essential to analyze the impact of this disruption on the pricing of farm produce at a granular level. Moreover, the farmers need a tool that guides them with the most suitable market/city/town to sell their farm produce to get a fair price. Methodology: One hundred and fifty thousand samples from the agricultural dataset, released by the Government of India, were used to perform statistical analysis and identify the supply disruptions as well as price disruptions of perishable agricultural produce. In addition, more than seventeen thousand samples were used to implement and train machine learning and deep learning models that can predict and guide the farmers about the appropriate market to sell their farm produce. In essence, the paper uses descriptive analytics to analyze the impact of COVID-19 on agricultural produce pricing. The paper explores the usage of prescriptive analytics to recommend an appropriate market to sell agricultural produce. Contribution: Five machine learning models based on Logistic Regression, K-Nearest Neighbors, Support Vector Machine, Random Forest, and Gradient Boosting, and three deep learning models based on Artificial Neural Networks were implemented. The performance of these models was compared using metrics like Precision, Recall, Accuracy, and F1-Score. Findings: Among the five classification models, the Gradient Boosting classifier was the optimal classifier that achieved precision, recall, accuracy, and F1 score of 99%. Out of the three deep learning models, the Adam optimizer-based deep neural network achieved precision, recall, accuracy, and F1 score of 99%. Recommendations for Practitioners: Gradient boosting technique and Adam-based deep learning model should be the preferred choice for analyzing agricultural pricing-related problems. Recommendation for Researchers: Ensemble learning techniques like Random Forest and Gradient boosting perform better than non-Ensemble classification techniques. Hyperparameter tuning is an essential step in developing these models and it improves the performance of the model. Impact on Society: Statistical analysis of the data revealed the true nature of demand and supply and price disruption. This analysis helps to assess the revenue impact borne by the farmers due to Covid-19. The machine learning and deep learning models help the farmers to get a better price for their crops. Though the da-taset used in this paper is related to India, the outcome of this research work applies to many developing countries that have similar regulated markets. Hence farmers from developing countries across the world can benefit from the outcome of this research work. Future Research: The machine learning and deep learning models were implemented and tested for markets in and around Bangalore. The model can be expanded to cover other markets within India.

Aim/Purpose: ************************************************************************ After its investigation, the Research Ethics, Integrity, and Governance team at RMIT University found that the primary author of this paper breached the Australian Code and/or RMIT Policy and requested that the article be retracted. ************************************************************************** This paper aimed to examine the influence of ethical and transformational leadership on employee creativity in Malaysia’s private higher education institutions (PHEIs) and the mediating role of organizational citizenship behavior. Background: To ensure their survival and success in today’s market, organizations need people who are creative and driven. Previous studies have demonstrated the importance of ethical leadership in fostering employee innovation and good corporate responsibility. Research on ethical leadership and transformational leadership, in particular, has played a significant role in elucidating the role of leadership in relation to organizational citizenship behavior (OCB). In this study, we have focused on ethical and transformational leadership as an antecedent for enhancing employee creativity. Despite an increase in leadership research, little is known about the underlying mechanisms that link ethical leadership and transformational leadership to OCB. Because it sheds light on factors other than ethical leadership and transformational leadership that influence employees’ extra-role activity, this research is relevant theoretically. OCB may have a mediating function between ethical leadership and transformational leadership style and employee creativity because it is associated with the greatest outcomes, but empirical research has yet to prove this. So, one of the study’s goals is to add to the hypotheses about how ethical leadership style and transformational leadership affect employee creativity by using an important mediating variable – OCB. Methodology: This study adopted a quantitative approach based on a cross-sectional survey and descriptive design to gather the data in a specific period. A convenient sampling approach was used to gauge 275 employees from Malaysia’s PHEIs. To test the hypotheses and obtain a conclusion, the acquired data was analyzed using the partial least square technique (PLS-SEM). Contribution: The study contributes to leadership literature by advancing OCB as a mediating factor that accounts for the link between ethical and transformational leadership and employee creativity in the higher education sector. Findings: According to the research, OCB has a substantial influence on the creativity of employees. Furthermore, ethical leadership boosted OCB and boosted employee creativity, according to the research. OCB and employee creativity have both been demonstrated to benefit greatly from transformational leadership. Further research revealed that OCB is a mediating factor in the link between leadership styles and creative thinking among employees. Recommendations for Practitioners: Higher education institutions should focus on developing leaders who value transparency and self-awareness in their interactions with followers and who demonstrate an inner moral perspective in addition to balanced information processing to ensure positive outcomes at the individual and organizational levels. Higher education institutions should place a priority on hiring leaders that exhibit ethical and transformational traits to raise awareness of these leadership styles among employees. Recommendation for Researchers: The new study also adds significantly to the body of knowledge by examining the relationship between ethical and transformational leadership and the creativity of the workforce. It aimed to identify the relationship between transformational leadership style and individual creativity in higher education by examining the mediating influence of OCB. Impact on Society: Higher education institutions should devise strategies for developing ethical and transformative leaders who will assist boost OCB and creativity within their workforce. Students and faculty in higher education can benefit from these leadership methods by learning to think in more diverse ways and by developing thought processes that lead to a larger pool of innovative ideas and solutions. As a consequence, employees who show creative behavior may be effectively managed by leaders who utilize ethical and transformational leadership styles and motivate them to show OCB that allow them to solve creative problems creatively. Future Research: A mixed-methods approach should be used in future research, and this should be done in public institutions in developing and developed nations to put the findings to use and generalize them even further. Future research will be able to examine other mediators to learn more about how and why ethical and transformational leadership styles affect PHEI employees’ creativity.

Aim/Purpose: The study aims to explore the attributes of self-phubbing and partner-phubbing, as well as their impact on marital relationship satisfaction and the quality of communication. Furthermore, it aims to comprehend how these characteristics could impact an individual’s total level of life satisfaction. Background: The study aims to establish a clear association between specific mobile phone usage behaviors and their subsequent impact on relationship satisfaction and the quality of communication. This study investigates the effects of two types of behaviors on interpersonal relationships: self-phubbing, which refers to an individual being deeply absorbed in their own mobile phone use, and partner-phubbing, which refers to witnessing one’s partner being deeply absorbed in a mobile device. Methodology: This study utilizes a quantitative approach. The poll involved 150 smartphone users in Malaysia who are in relationships, and they participated by completing a questionnaire. The data analysis was performed using the Partial Least Squares-based Structural Equation Modeling method. Contribution: This research addresses the gap and gives insight into the consequences of self and partner phubbing and its impact on the relationship and life satisfaction among partners by providing a research model that was validated with primary data. Findings: The results of this survey show that smartphone conflicts harm relationship satisfaction but not communication quality. It was revealed that communication quality does not directly bring a negative impact on life satisfaction, but it directly affects relationship satisfaction, which, in turn, harms life satisfaction. Recommendations for Practitioners: The findings of this study can be used by practitioners to improve relationship counseling and therapy. Through the integration of the notion of phubbing and its impact on relationship happiness, couples can receive guidance on how to reduce the tension that arises from using smartphones. Recommendation for Researchers: Previous research was conducted exclusively on only an individual’s phubbing behavior, but limited work was done on the partner’s phubbing behavior. Future researchers can enhance this model by identifying more factors. Impact on Society: This study addresses broader societal ramifications in addition to the dynamics of particular relationships. This study promotes a more mindful use of smartphones by exposing the complex relationships between technology use, relationship happiness, and general life contentment. This will ultimately lead to healthier relationships and improved societal well-being. Future Research: In the future, we are going to implement an artificial neural network approach to test this data to predict the most important factors that influence phubbing.