Archaeologists say they have discovered the oldest known evidence for intensive ochre mining worldwide, at least 48,000 years ago, in Lion Cavern at Ngwenya in Eswatini, a landlocked country in southern Africa.

The post Lion Cavern in Eswatini is World’s Oldest Ochre Mine, Archaeologists Say appeared first on Sci.News: Breaking Science News.

DNA methylation is one of several epigenetic mechanisms crucial for regulating gene expression in eukaryotic organisms.

The post Scientists Investigate Inner Workings of DNA Methylation in Plants appeared first on Sci.News: Breaking Science News.

When NASA’s Voyager 2 spacecraft flew by Uranus in 1986, it provided scientists’ first close glimpse of this ice-giant planet.

The post Voyager 2’s Flyby of Uranus in 1986 was During Anomalous Solar Event, New Study Suggests appeared first on Sci.News: Breaking Science News.

The standard model predicted that the NASA/ESA/CSA James Webb Space Telescope would see dim signals from small, primitive galaxies.

The post New Research Questions Standard Theory of How Galaxies Formed in Early Universe appeared first on Sci.News: Breaking Science News.

Jay-yi Nah is an underwater archaeological site dating to the Early Classic Maya period (250-600 CE) that focused on salt production for local use or perhaps local production for down-the-line trading.

The post Earliest-Known Maya Salt Works Discovered in Belize appeared first on Sci.News: Breaking Science News.

Around 25 per cent of the world’s population has intestinal parasite infections – these could hinder the effectiveness of covid-19 vaccines, according to research in mice

Wastewater is a major reservoir for antibiotic resistance genes, but modified bacteria can chop up this DNA before the dangerous microbes reach people

A new test spots Lyme disease faster than the existing go-to approach and, if approved, could reduce the risk of complications

Levels of certain cells, fatty molecules and proteins in the blood are different in people with chronic fatigue syndrome than in those without it, which could help doctors spot the condition sooner

ALS, the most common form of motor neuron disease, can take a long time to diagnose, but a blood test could help doctors spot the condition sooner

Mosquito larvae die after consuming hemp leaves because they react strongly to the cannabidiol in the foliage. The discovery might lead to the development of a new pesticide to control mosquito numbers

A chemical produced by gut bacteria could be the basis for a non-invasive test for endometriosis – and mouse experiments suggest it might also help treat the condition

Everything you need to know about Rwanda's outbreak of Marburg virus, which has been described as one of the deadliest human pathogens

From the benefits of fermented foods to diets that promise a better hormone balance, there is a confusing array of dietary advice out there

President-elect Trump announced that he had picked real estate investor and campaign donor Steve Witkoff to be his special envoy to the Middle East.

Estimates on the cost of foodborne illness in Australia have revealed poultry is associated with the highest burden. In 2023, Food Standards Australia New Zealand (FSANZ) commissioned the University of Melbourne and the Australian National University to estimate the annual cost of foodborne illness caused by food commodities and pathogens.... Continue Reading

A new study by the Centers for Disease Control and Prevention found that some dairy farm employees showed signs of infection, even when they didn’t report feeling sick. The CDC concluded that more bird flu testing of dairy farm employees is required. According to Dr. Nirav Shah, the CDC’s principal... Continue Reading

An investigation into a Salmonella outbreak in Sweden has been restarted after more people fell sick. From August to October, 81 people from 18 regions contracted Salmonella Typhimurium with sequence type (ST) 36. Where information about the country of infection is available, all cases were infected in Sweden. Folkhälsomyndigheten (the Public... Continue Reading

Scientists have shared details of how they are going about updating foodborne infection figures that will be published by the World Health Organization (WHO) in 2025. As part of the process to update estimates on the burden of foodborne diseases published in 2015, WHO is conducting a global source attribution... Continue Reading

The Centers for Disease Control and Prevention typically coordinates between 17 and 36 investigations of foodborne illnesses involving multiple states each week.  A report is posted weekly, but does not include any information about where the outbreaks are occurring, what foods are involved, or how many patients have been identified.... Continue Reading

Montana public health officials are investigating an outbreak of infections caused by Salmonella. The Cascade City-County Health Department in Great Falls is reporting that six students at Sacajawea and Valley View elementary schools have tested positive for the pathogen. A staff member at another school has also tested positive. There... Continue Reading

More than 20 people are believed to have died in one South African province after consuming food from local shops. Gauteng Premier Panyaza Lesufi said the majority of deaths have been children aged between six and nine. “The first uniform approach across the province was to adopt a mechanism of... Continue Reading

Pension veterans say there was more going on behind the scenes than scrutiny of costs

Listings outpace demand in Toronto and Vancouver

Authorities arrested a man accused of strangling a woman outside a Times Square hotel who later died from her injuries, police said Tuesday.

The Canadian women's soccer team was implicated in a drone scandal this past summer. But, an investigation determined drone use against opponents, predated the Paris Olympics.

In the first quarter of Monday's Dolphins-Rams game, ESPN reported that Tyreek Hill said a torn ligament in his wrist became worst after he was detained by police.

Along the country road that leads to ATL4, a giant data center going up east of Atlanta, dozens of parked cars and pickups lean tenuously on the narrow dirt shoulders. The many out-of-state plates are typical of the phalanx of tradespeople who muster for these massive construction jobs. With tech giants, utilities, and governments budgeting upwards of US $1 trillion for capital expansion to join the global battle for AI dominance, data centers are the bunkers, factories, and skunkworks—and concrete and electricity are the fuel and ammunition.

To the casual observer, the data industry can seem incorporeal, its products conjured out of weightless bits. But as I stand beside the busy construction site for DataBank’s ATL4, what impresses me most is the gargantuan amount of material—mostly concrete—that gives shape to the goliath that will house, secure, power, and cool the hardware of AI. Big data is big concrete. And that poses a big problem.

Concrete is not just a major ingredient in data centers and the power plants being built to energize them. As the world’s most widely manufactured material, concrete—and especially the cement within it—is also a major contributor to climate change, accounting for around 6 percent of global greenhouse gas emissions. Data centers use so much concrete that the construction boom is wrecking tech giants’ commitments to eliminate their carbon emissions. Even though Google, Meta, and Microsoft have touted goals to be carbon neutral or negative by 2030, and Amazon by 2040, the industry is now moving in the wrong direction.

Last year, Microsoft’s carbon emissions jumped by over 30 percent, primarily due to the materials in its new data centers. Google’s greenhouse emissions are up by nearly 50 percent over the past five years. As data centers proliferate worldwide, Morgan Stanley projects that data centers will release about 2.5 billion tonnes of CO₂ each year by 2030—or about 40 percent of what the United States currently emits from all sources.

But even as innovations in AI and the big-data construction boom are boosting emissions for the tech industry’s hyperscalers, the reinvention of concrete could also play a big part in solving the problem. Over the last decade, there’s been a wave of innovation, some of it profit-driven, some of it from academic labs, aimed at fixing concrete’s carbon problem. Pilot plants are being fielded to capture CO ₂ from cement plants and sock it safely away. Other projects are cooking up climate-friendlier recipes for cements. And AI and other computational tools are illuminating ways to drastically cut carbon by using less cement in concrete and less concrete in data centers, power plants, and other structures.

Demand for green concrete is clearly growing. Amazon, Google, Meta, and Microsoft recently joined an initiative led by the Open Compute Project Foundation to accelerate testing and deployment of low-carbon concrete in data centers, for example. Supply is increasing, too—though it’s still minuscule compared to humanity’s enormous appetite for moldable rock. But if the green goals of big tech can jump-start innovation in low-carbon concrete and create a robust market for it as well, the boom in big data could eventually become a boon for the planet.

Hyperscaler Data Centers: So Much Concrete

At the construction site for ATL4, I’m met by Tony Qorri, the company’s big, friendly, straight-talking head of construction. He says that this giant building and four others DataBank has recently built or is planning in the Atlanta area will together add 133,000 square meters (1.44 million square feet) of floor space.

They all follow a universal template that Qorri developed to optimize the construction of the company’s ever-larger centers. At each site, trucks haul in more than a thousand prefabricated concrete pieces: wall panels, columns, and other structural elements. Workers quickly assemble the precision-measured parts. Hundreds of electricians swarm the building to wire it up in just a few days. Speed is crucial when construction delays can mean losing ground in the AI battle.

The ATL4 data center outside Atlanta is one of five being built by DataBank. Together they will add over 130,000 square meters of floor space.DataBank

That battle can be measured in new data centers and floor space. The United States is home to more than 5,000 data centers today, and the Department of Commerce forecasts that number to grow by around 450 a year through 2030. Worldwide, the number of data centers now exceeds 10,000, and analysts project another 26.5 million m² of floor space over the next five years. Here in metro Atlanta, developers broke ground last year on projects that will triple the region’s data-center capacity. Microsoft, for instance, is planning a 186,000-m² complex; big enough to house around 100,000 rack-mounted servers, it will consume 324 megawatts of electricity.

The velocity of the data-center boom means that no one is pausing to await greener cement. For now, the industry’s mantra is “Build, baby, build.”

“There’s no good substitute for concrete in these projects,” says Aaron Grubbs, a structural engineer at ATL4. The latest processors going on the racks are bigger, heavier, hotter, and far more power hungry than previous generations. As a result, “you add a lot of columns,” Grubbs says.

1,000 Companies Working on Green Concrete

Concrete may not seem an obvious star in the story of how electricity and electronics have permeated modern life. Other materials—copper and silicon, aluminum and lithium—get higher billing. But concrete provides the literal, indispensable foundation for the world’s electrical workings. It is the solid, stable, durable, fire-resistant stuff that makes power generation and distribution possible. It undergirds nearly all advanced manufacturing and telecommunications. What was true in the rapid build-out of the power industry a century ago remains true today for the data industry: Technological progress begets more growth—and more concrete. Although each generation of processor and memory squeezes more computing onto each chip, and advances in superconducting microcircuitry raise the tantalizing prospect of slashing the data center’s footprint, Qorri doesn’t think his buildings will shrink to the size of a shoebox anytime soon. “I’ve been through that kind of change before, and it seems the need for space just grows with it,” he says.

By weight, concrete is not a particularly carbon-intensive material. Creating a kilogram of steel, for instance, releases about 2.4 times as much CO₂ as a kilogram of cement does. But the global construction industry consumes about 35 billion tonnes of concrete a year. That’s about 4 tonnes for every person on the planet and twice as much as all other building materials combined. It’s that massive scale—and the associated cost and sheer number of producers—that creates both a threat to the climate and inertia that resists change.

At its Edmonton, Alberta, plant [above], Heidelberg Materials is adding systems to capture carbon dioxide produced by the manufacture of Portland cement.Heidelberg Materials North America

Yet change is afoot. When I visited the innovation center operated by the Swiss materials giant Holcim, in Lyon, France, research executives told me about the database they’ve assembled of nearly 1,000 companies working to decarbonize cement and concrete. None yet has enough traction to measurably reduce global concrete emissions. But the innovators hope that the boom in data centers—and in associated infrastructure such as new nuclear reactors and offshore wind farms, where each turbine foundation can use up to 7,500 cubic meters of concrete—may finally push green cement and concrete beyond labs, startups, and pilot plants.

Why cement production emits so much carbon

Though the terms “cement” and “concrete” are often conflated, they are not the same thing. A popular analogy in the industry is that cement is the egg in the concrete cake. Here’s the basic recipe: Blend cement with larger amounts of sand and other aggregates. Then add water, to trigger a chemical reaction with the cement. Wait a while for the cement to form a matrix that pulls all the components together. Let sit as it cures into a rock-solid mass.

Portland cement, the key binder in most of the world’s concrete, was serendipitously invented in England by William Aspdin, while he was tinkering with earlier mortars that his father, Joseph, had patented in 1824. More than a century of science has revealed the essential chemistry of how cement works in concrete, but new findings are still leading to important innovations, as well as insights into how concrete absorbs atmospheric carbon as it ages.

As in the Aspdins’ day, the process to make Portland cement still begins with limestone, a sedimentary mineral made from crystalline forms of calcium carbonate. Most of the limestone quarried for cement originated hundreds of millions of years ago, when ocean creatures mineralized calcium and carbonate in seawater to make shells, bones, corals, and other hard bits.

Cement producers often build their large plants next to limestone quarries that can supply decades’ worth of stone. The stone is crushed and then heated in stages as it is combined with lesser amounts of other minerals that typically include calcium, silicon, aluminum, and iron. What emerges from the mixing and cooking are small, hard nodules called clinker. A bit more processing, grinding, and mixing turns those pellets into powdered Portland cement, which accounts for about 90 percent of the CO₂ emitted by the production of conventional concrete [see infographic, “Roads to Cleaner Concrete”].

Karen Scrivener, shown in her lab at EPFL, has developed concrete recipes that reduce emissions by 30 to 40 percent.Stefan Wermuth/Bloomberg/Getty Images

Decarbonizing Portland cement is often called heavy industry’s “hard problem” because of two processes fundamental to its manufacture. The first process is combustion: To coax limestone’s chemical transformation into clinker, large heaters and kilns must sustain temperatures around 1,500 °C. Currently that means burning coal, coke, fuel oil, or natural gas, often along with waste plastics and tires. The exhaust from those fires generates 35 to 50 percent of the cement industry’s emissions. Most of the remaining emissions result from gaseous CO ₂ liberated by the chemical transformation of the calcium carbonate (CaCO₃) into calcium oxide (CaO), a process called calcination. That gas also usually heads straight into the atmosphere.

Concrete production, in contrast, is mainly a business of mixing cement powder with other ingredients and then delivering the slurry speedily to its destination before it sets. Most concrete in the United States is prepared to order at batch plants—souped-up materials depots where the ingredients are combined, dosed out from hoppers into special mixer trucks, and then driven to job sites. Because concrete grows too stiff to work after about 90 minutes, concrete production is highly local. There are more ready-mix batch plants in the United States than there are Burger King restaurants.

Batch plants can offer thousands of potential mixes, customized to fit the demands of different jobs. Concrete in a hundred-story building differs from that in a swimming pool. With flexibility to vary the quality of sand and the size of the stone—and to add a wide variety of chemicals—batch plants have more tricks for lowering carbon emissions than any cement plant does.

Cement plants that capture carbon

China accounts for more than half of the concrete produced and used in the world, but companies there are hard to track. Outside of China, the top three multinational cement producers—Holcim, Heidelberg Materials in Germany, and Cemex in Mexico—have launched pilot programs to snare CO₂ emissions before they escape and then bury the waste deep underground. To do that, they’re taking carbon capture and storage (CCS) technology already used in the oil and gas industry and bolting it onto their cement plants.

These pilot programs will need to scale up without eating profits—something that eluded the coal industry when it tried CCS decades ago. Tough questions also remain about where exactly to store billions of tonnes of CO ₂ safely, year after year.

The appeal of CCS for cement producers is that they can continue using existing plants while still making progress toward carbon neutrality, which trade associations have committed to reach by 2050. But with well over 3,000 plants around the world, adding CCS to all of them would take enormous investment. Currently less than 1 percent of the global supply is low-emission cement. Accenture, a consultancy, estimates that outfitting the whole industry for carbon capture could cost up to $900 billion.

“The economics of carbon capture is a monster,” says Rick Chalaturnyk, a professor of geotechnical engineering at the University of Alberta, in Edmonton, Canada, who studies carbon capture in the petroleum and power industries. He sees incentives for the early movers on CCS, however. “If Heidelberg, for example, wins the race to the lowest carbon, it will be the first [cement] company able to supply those customers that demand low-carbon products”—customers such as hyperscalers.

Though cement companies seem unlikely to invest their own billions in CCS, generous government subsidies have enticed several to begin pilot projects. Heidelberg has announced plans to start capturing CO₂ from its Edmonton operations in late 2026, transforming it into what the company claims would be “the world’s first full-scale net-zero cement plant.” Exhaust gas will run through stations that purify the CO₂ and compress it into a liquid, which will then be transported to chemical plants to turn it into products or to depleted oil and gas reservoirs for injection underground, where hopefully it will stay put for an epoch or two.

Chalaturnyk says that the scale of the Edmonton plant, which aims to capture a million tonnes of CO₂ a year, is big enough to give CCS technology a reasonable test. Proving the economics is another matter. Half the $1 billion cost for the Edmonton project is being paid by the governments of Canada and Alberta.

ROADS TO CLEANER CONCRETE

As the big-data construction boom boosts the tech industry’s emissions, the reinvention of concrete could play a major role in solving the problem.

• CONCRETE TODAY Most of the greenhouse emissions from concrete come from the production of Portland cement, which requires high heat and releases carbon dioxide (CO₂) directly into the air.

• CONCRETE TOMORROW At each stage of cement and concrete production, advances in ingredients, energy supplies, and uses of concrete promise to reduce waste and pollution.

The U.S. Department of Energy has similarly offered Heidelberg up to $500 million to help cover the cost of attaching CCS to its Mitchell, Ind., plant and burying up to 2 million tonnes of CO₂ per year below the plant. And the European Union has gone even bigger, allocating nearly €1.5 billion ($1.6 billion) from its Innovation Fund to support carbon capture at cement plants in seven of its member nations.

These tests are encouraging, but they are all happening in rich countries, where demand for concrete peaked decades ago. Even in China, concrete production has started to flatten. All the growth in global demand through 2040 is expected to come from less-affluent countries, where populations are still growing and quickly urbanizing. According to projections by the Rhodium Group, cement production in those regions is likely to rise from around 30 percent of the world’s supply today to 50 percent by 2050 and 80 percent before the end of the century.

So will rich-world CCS technology translate to the rest of the world? I asked Juan Esteban Calle Restrepo, the CEO of Cementos Argos, the leading cement producer in Colombia, about that when I sat down with him recently at his office in Medellín. He was frank. “Carbon capture may work for the U.S. or Europe, but countries like ours cannot afford that,” he said.

Better cement through chemistry

As long as cement plants run limestone through fossil-fueled kilns, they will generate excessive amounts of carbon dioxide. But there may be ways to ditch the limestone—and the kilns. Labs and startups have been finding replacements for limestone, such as calcined kaolin clay and fly ash, that don’t release CO ₂ when heated. Kaolin clays are abundant around the world and have been used for centuries in Chinese porcelain and more recently in cosmetics and paper. Fly ash—a messy, toxic by-product of coal-fired power plants—is cheap and still widely available, even as coal power dwindles in many regions.

At the Swiss Federal Institute of Technology Lausanne (EPFL), Karen Scrivener and colleagues developed cements that blend calcined kaolin clay and ground limestone with a small portion of clinker. Calcining clay can be done at temperatures low enough that electricity from renewable sources can do the job. Various studies have found that the blend, known as LC3, can reduce overall emissions by 30 to 40 percent compared to those of Portland cement.

LC3 is also cheaper to make than Portland cement and performs as well for nearly all common uses. As a result, calcined clay plants have popped up across Africa, Europe, and Latin America. In Colombia, Cementos Argos is already producing more than 2 million tonnes of the stuff annually. The World Economic Forum’s Centre for Energy and Materials counts LC3 among the best hopes for the decarbonization of concrete. Wide adoption by the cement industry, the centre reckons, “can help prevent up to 500 million tonnes of CO₂ emissions by 2030.”

In a win-win for the environment, fly ash can also be used as a building block for low- and even zero-emission concrete, and the high heat of processing neutralizes many of the toxins it contains. Ancient Romans used volcanic ash to make slow-setting but durable concrete: The Pantheon, built nearly two millennia ago with ash-based cement, is still in great shape.

Coal fly ash is a cost-effective ingredient that has reactive properties similar to those of Roman cement and Portland cement. Many concrete plants already add fresh fly ash to their concrete mixes, replacing 15 to 35 percent of the cement. The ash improves the workability of the concrete, and though the resulting concrete is not as strong for the first few months, it grows stronger than regular concrete as it ages, like the Pantheon.

University labs have tested concretes made entirely with fly ash and found that some actually outperform the standard variety. More than 15 years ago, researchers at Montana State University used concrete made with 100 percent fly ash in the floors and walls of a credit union and a transportation research center. But performance depends greatly on the chemical makeup of the ash, which varies from one coal plant to the next, and on following a tricky recipe. The decommissioning of coal-fired plants has also been making fresh fly ash scarcer and more expensive.

At Sublime Systems’ pilot plant in Massachusetts, the company is using electrochemistry instead of heat to produce lime silicate cements that can replace Portland cement.Tony Luong

That has spurred new methods to treat and use fly ash that’s been buried in landfills or dumped into ponds. Such industrial burial grounds hold enough fly ash to make concrete for decades, even after every coal plant shuts down. Utah-based Eco Material Technologies is now producing cements that include both fresh and recovered fly ash as ingredients. The company claims it can replace up to 60 percent of the Portland cement in concrete—and that a new variety, suitable for 3D printing, can substitute entirely for Portland cement.

Hive 3D Builders, a Houston-based startup, has been feeding that low-emissions concrete into robots that are printing houses in several Texas developments. “We are 100 percent Portland cement–free,” says Timothy Lankau, Hive 3D’s CEO. “We want our homes to last 1,000 years.”

Sublime Systems, a startup spun out of MIT by battery scientists, uses electrochemistry rather than heat to make low-carbon cement from rocks that don’t contain carbon. Similar to a battery, Sublime’s process uses a voltage between an electrode and a cathode to create a pH gradient that isolates silicates and reactive calcium, in the form of lime (CaO). The company mixes those ingredients together to make a cement with no fugitive carbon, no kilns or furnaces, and binding power comparable to that of Portland cement. With the help of $87 million from the U.S. Department of Energy, Sublime is building a plant in Holyoke, Mass., that will be powered almost entirely by hydroelectricity. Recently the company was tapped to provide concrete for a major offshore wind farm planned off the coast of Martha’s Vineyard.

Software takes on the hard problem of concrete

It is unlikely that any one innovation will allow the cement industry to hit its target of carbon neutrality before 2050. New technologies take time to mature, scale up, and become cost-competitive. In the meantime, says Philippe Block, a structural engineer at ETH Zurich, smart engineering can reduce carbon emissions through the leaner use of materials.

His research group has developed digital design tools that make clever use of geometry to maximize the strength of concrete structures while minimizing their mass. The team’s designs start with the soaring architectural elements of ancient temples, cathedrals, and mosques—in particular, vaults and arches—which they miniaturize and flatten and then 3D print or mold inside concrete floors and ceilings. The lightweight slabs, suitable for the upper stories of apartment and office buildings, use much less concrete and steel reinforcement and have a CO₂ footprint that’s reduced by 80 percent.

There’s hidden magic in such lean design. In multistory buildings, much of the mass of concrete is needed just to hold the weight of the material above it. The carbon savings of Block’s lighter slabs thus compound, because the size, cost, and emissions of a building’s conventional-concrete elements are slashed.

Vaulted, a Swiss startup, uses digital design tools to minimize the concrete in floors and ceilings, cutting their CO₂ footprint by 80 percent.Vaulted

In Dübendorf, Switzerland, a wildly shaped experimental building has floors, roofs, and ceilings created by Block’s structural system. Vaulted, a startup spun out of ETH, is engineering and fabricating the lighter floors of a 10-story office building under construction in Zug, Switzerland.

That country has also been a leader in smart ways to recycle and reuse concrete, rather than simply landfilling demolition rubble. This is easier said than done—concrete is tough stuff, riddled with rebar. But there’s an economic incentive: Raw materials such as sand and limestone are becoming scarcer and more costly. Some jurisdictions in Europe now require that new buildings be made from recycled and reused materials. The new addition of the Kunsthaus Zürich museum, a showcase of exquisite Modernist architecture, uses recycled material for all but 2 percent of its concrete.

As new policies goose demand for recycled materials and threaten to restrict future use of Portland cement across Europe, Holcim has begun building recycling plants that can reclaim cement clinker from old concrete. It recently turned the demolition rubble from some 1960s apartment buildings outside Paris into part of a 220-unit housing complex—touted as the first building made from 100 percent recycled concrete. The company says it plans to build concrete recycling centers in every major metro area in Europe and, by 2030, to include 30 percent recycled material in all of its cement.

Further innovations in low-carbon concrete are certain to come, particularly as the powers of machine learning are applied to the problem. Over the past decade, the number of research papers reporting on computational tools to explore the vast space of possible concrete mixes has grown exponentially. Much as AI is being used to accelerate drug discovery, the tools learn from huge databases of proven cement mixes and then apply their inferences to evaluate untested mixes.

Researchers from the University of Illinois and Chicago-based Ozinga, one of the largest private concrete producers in the United States, recently worked with Meta to feed 1,030 known concrete mixes into an AI. The project yielded a novel mix that will be used for sections of a data-center complex in DeKalb, Ill. The AI-derived concrete has a carbon footprint 40 percent lower than the conventional concrete used on the rest of the site. Ryan Cialdella, Ozinga’s vice president of innovation, smiles as he notes the virtuous circle: AI systems that live in data centers can now help cut emissions from the concrete that houses them.

A sustainable foundation for the information age

Cheap, durable, and abundant yet unsustainable, concrete made with Portland cement has been one of modern technology’s Faustian bargains. The built world is on track to double in floor space by 2060, adding 230,000 km ², or more than half the area of California. Much of that will house the 2 billion more people we are likely to add to our numbers. As global transportation, telecom, energy, and computing networks grow, their new appendages will rest upon concrete. But if concrete doesn’t change, we will perversely be forced to produce even more concrete to protect ourselves from the coming climate chaos, with its rising seas, fires, and extreme weather.

The AI-driven boom in data centers is a strange bargain of its own. In the future, AI may help us live even more prosperously, or it may undermine our freedoms, civilities, employment opportunities, and environment. But solutions to the bad climate bargain that AI’s data centers foist on the planet are at hand, if there’s a will to deploy them. Hyperscalers and governments are among the few organizations with the clout to rapidly change what kinds of cement and concrete the world uses, and how those are made. With a pivot to sustainability, concrete’s unique scale makes it one of the few materials that could do most to protect the world’s natural systems. We can’t live without concrete—but with some ambitious reinvention, we can thrive with it.

This article was updated on 04 November 2024.

Boston Dynamics is the master of dropping amazing robot videos with no warning, and last week, we got a surprise look at the new electric Atlas going “hands on” with a practical factory task.

This video is notable because it’s the first real look we’ve had at the new Atlas doing something useful—or doing anything at all, really, as the introductory video from back in April (the first time we saw the robot) was less than a minute long. And the amount of progress that Boston Dynamics has made is immediately obvious, with the video showing a blend of autonomous perception, full body motion, and manipulation in a practical task.

We sent over some quick questions as soon as we saw the video, and we’ve got some extra detail from Scott Kuindersma, senior director of Robotics Research at Boston Dynamics.

If you haven’t seen this video yet, what kind of robotics person are you, and also here you go:

Atlas is autonomously moving engine covers between supplier containers and a mobile sequencing dolly. The robot receives as input a list of bin locations to move parts between.

Atlas uses a machine learning (ML) vision model to detect and localize the environment fixtures and individual bins [0:36]. The robot uses a specialized grasping policy and continuously estimates the state of manipulated objects to achieve the task.

There are no prescribed or teleoperated movements; all motions are generated autonomously online. The robot is able to detect and react to changes in the environment (e.g., moving fixtures) and action failures (e.g., failure to insert the cover, tripping, environment collisions [1:24]) using a combination of vision, force, and proprioceptive sensors.

Eagle-eyed viewers will have noticed that this task is very similar to what we saw hydraulic Atlas (Atlas classic?) working on just before it retired. We probably don’t need to read too much into the differences between how each robot performs that task, but it’s an interesting comparison to make.

For more details, here’s our Q&A with Kuindersma:

How many takes did this take?

Kuindersma: We ran this sequence a couple times that day, but typically we’re always filming as we continue developing and testing Atlas. Today we’re able to run that engine cover demo with high reliability, and we’re working to expand the scope and duration of tasks like these.

Is this a task that humans currently do?

Kuindersma: Yes.

What kind of world knowledge does Atlas have while doing this task?

Kuindersma: The robot has access to a CAD model of the engine cover that is used for object pose prediction from RGB images. Fixtures are represented more abstractly using a learned keypoint prediction model. The robot builds a map of the workcell at startup which is updated on the fly when changes are detected (e.g., moving fixture).

Does Atlas’s torso have a front or back in a meaningful way when it comes to how it operates?

Kuindersma: Its head/torso/pelvis/legs do have “forward” and “backward” directions, but the robot is able to rotate all of these relative to one another. The robot always knows which way is which, but sometimes the humans watching lose track.

Are the head and torso capable of unlimited rotation?

Kuindersma: Yes, many of Atlas’s joints are continuous.

How long did it take you folks to get used to the way Atlas moves?

Kuindersma: Atlas’s motions still surprise and delight the team.

OSHA recommends against squatting because it can lead to workplace injuries. How does Atlas feel about that?

Kuindersma: As might be evident by some of Atlas’s other motions, the kinds of behaviors that might be injurious for humans might be perfectly fine for robots.

Can you describe exactly what process Atlas goes through at 1:22?

Kuindersma: The engine cover gets caught on the fabric bins and triggers a learned failure detector on the robot. Right now this transitions into a general-purpose recovery controller, which results in a somewhat jarring motion (we will improve this). After recovery, the robot retries the insertion using visual feedback to estimate the state of both the part and fixture.

Were there other costume options you considered before going with the hot dog?

Kuindersma: Yes, but marketing wants to save them for next year.

How many important sensors does the hot dog costume occlude?

Kuindersma: None. The robot is using cameras in the head, proprioceptive sensors, IMU, and force sensors in the wrists and feet. We did have to cut the costume at the top so the head could still spin around.

Why are pickles always causing problems?

Kuindersma: Because pickles are pesky, polarizing pests.

Finished chips coming in from the foundry are subject to a battery of tests. For those destined for critical systems in cars, those tests are particularly extensive and can add 5 to 10 percent to the cost of a chip. But do you really need to do every single test?

Engineers at NXP have developed a machine-learning algorithm that learns the patterns of test results and figures out the subset of tests that are really needed and those that they could safely do without. The NXP engineers described the process at the IEEE International Test Conference in San Diego last week.

NXP makes a wide variety of chips with complex circuitry and advanced chip-making technology, including inverters for EV motors, audio chips for consumer electronics, and key-fob transponders to secure your car. These chips are tested with different signals at different voltages and at different temperatures in a test process called continue-on-fail. In that process, chips are tested in groups and are all subjected to the complete battery, even if some parts fail some of the tests along the way.

Chips were subject to between 41 and 164 tests, and the algorithm was able to recommend removing 42 to 74 percent of those tests.

“We have to ensure stringent quality requirements in the field, so we have to do a lot of testing,” says Mehul Shroff, an NXP Fellow who led the research. But with much of the actual production and packaging of chips outsourced to other companies, testing is one of the few knobs most chip companies can turn to control costs. “What we were trying to do here is come up with a way to reduce test cost in a way that was statistically rigorous and gave us good results without compromising field quality.”

A Test Recommender System

Shroff says the problem has certain similarities to the machine learning-based recommender systems used in e-commerce. “We took the concept from the retail world, where a data analyst can look at receipts and see what items people are buying together,” he says. “Instead of a transaction receipt, we have a unique part identifier and instead of the items that a consumer would purchase, we have a list of failing tests.”

The NXP algorithm then discovered which tests fail together. Of course, what’s at stake for whether a purchaser of bread will want to buy butter is quite different from whether a test of an automotive part at a particular temperature means other tests don’t need to be done. “We need to have 100 percent or near 100 percent certainty,” Shroff says. “We operate in a different space with respect to statistical rigor compared to the retail world, but it’s borrowing the same concept.”

As rigorous as the results are, Shroff says that they shouldn’t be relied upon on their own. You have to “make sure it makes sense from engineering perspective and that you can understand it in technical terms,” he says. “Only then, remove the test.”

Shroff and his colleagues analyzed data obtained from testing seven microcontrollers and applications processors built using advanced chipmaking processes. Depending on which chip was involved, they were subject to between 41 and 164 tests, and the algorithm was able to recommend removing 42 to 74 percent of those tests. Extending the analysis to data from other types of chips led to an even wider range of opportunities to trim testing.

The algorithm is a pilot project for now, and the NXP team is looking to expand it to a broader set of parts, reduce the computational overhead, and make it easier to use.

https://maps.google.co.uk/url?q=https://yukselenakademi.com/kurs/detay/emlakcilik-belgesi-seviye-5

Bütün ihtiyaçlara en iyi şekilde karşılık veren Samsun perde modelleri bütçe dostu fiyatlarla sunulmaktadır. Fon perde, tül perde, stor perde, güneşlik ve plise SAMSUN Ucuz Perde Modelleri ve Fiyatları. Siz hemen şimdi maviperde.com'dan güvenle alışveriş yapın, biz SAMSUN'un her yerine ucuz perde modellerini imalattan Samsun Perde Mağazaları ve PERDES Brillant Şubeleri: İlkadım, Atakum, Bafra, Çarşamba, Canik, Vezirköprü, Terme, Tekkeköy, Havza, 19 Mayıs, Alaçam perdeci, Samsun bölgesi zebra perdeci, zebra perdeci, perdeciler Samsun, perdeci adres Samsun, perde servisi. Samsun zebra perde montajı montajcısı. https://asrtekstil.com/

Why are there so many VPNs for Apple TV? Oh, right—geofencing.

Xbox hardware sales dropped 29 percent, but that barely made a dent.

Will Apple keep one of the few single-fee alternatives to Photoshop available?

First Mac mini redesign in almost 15 years highlights how good the insides are.

Not a surprising generational update, but a lot of progress for just one year.

Scientists continue to learn new things about the planet, its sweeping rings and its many moons

From Aldebaran to Vega, these gleaming beacons dazzle Northern Hemisphere viewers at various times of the year and provide a useful entry point into amateur astronomy

New studies suggest smoke from western megafires may be damaging bird health and leading to strange behavior

Here's how the aerial acrobats are able to survive on a nearly all-sugar diet, fly higher than many helicopters can and migrate over the open ocean

Due for a mani or pedi? No need for a salon when you have one of these DIY gel nail kits.

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

The comedian is more than ready to reprise her Emmy-nominated 'SNL' guest role.

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

The experts behind Beyoncé, Kerry Washington and Serena Williams' tresses reveal their all-time favorite products for natural hair.

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

Shop stylish diaper bags that busy moms won't mind carrying.

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

Love the look of fresh color but hate how quickly it fades? Try these shampoos for color-treated hair.

[[ This is a content summary only. Visit my website for full links, other content, and more! ]]

In the bustling world of the restaurant industry, standing out is more challenging than ever. With diners increasingly turning to the internet to discover their next meal, having a strong online presence is crucial. This guide will show you practical tips and techniques to maximise your restaurant’s online visibility and enhance your SEO efforts. By […]

The post Maximising Online Visibility and SEO for Restaurants: Tips and Techniques appeared first on Chart Attack.

We’ve all been there. You’ve gone to the store or scrolled through countless online sites, desperately searching for a graduation gift that’s unique, funny, and something your friend won’t toss in a drawer and forget about. Well, it turns out there’s a new trend catching fire, and it’s a fake college diploma. Yes, you heard […]

The post Why Fake College Diplomas Are the Latest Comedy Trend in Graduation Gifts appeared first on Chart Attack.

Dry ice is becoming an essential resource for various industries in Lakeland, Florida. Made from carbon dioxide in its solid form, dry ice sublimates directly into gas without leaving any liquid residue. This characteristic makes it a highly effective cooling solution, ideal for transporting perishable goods, supporting medical needs, and industrial cleaning. With the right […]

The post Essential Guide to Choosing the Best Lakeland Dry Ice Supplier for Your Business Needs appeared first on Chart Attack.

Organizing business events can be a challenge. There’s always the concern that guests will lose interest or become disengaged. When organizing team-building activities and office parties, it becomes essential to add something extra that keeps everyone active and involved. That way, the event not only meets expectations but exceeds them, leaving people excited and talking […]

The post 4 Creative Ways to Keep Guests Engaged at Your Next Business Event appeared first on Chart Attack.