li

Injectable dual cross-linked adhesive hyaluronic acid multifunctional hydrogel scaffolds for potential applications in cartilage repair

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00371A, Paper
Chenxi Yu, Huichang Gao, Qingtao Li, Xiaodong Cao
A double crosslinked hydrogels was designed and prepared by combining the Diels–Alder click reaction and possessed good mechanical strength, injectability and adhesion.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Turning natural δ-lactones to thermodynamically stable polymers with triggered recyclability

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00270D, Paper
Open Access
  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Linnea Cederholm, Peter Olsén, Minna Hakkarainen, Karin Odelius
Extending the use of natural δ-lactones in circular materials via a synthetic strategy yielding thermodynamically stable polyesters with triggered recyclability.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Highly elastic, strong, and reprocessable cross-linked polyolefin elastomers enabled by boronic ester bonds

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00235F, Paper
Fei Yang, Li Pan, Zhe Ma, Yahui Lou, Yuanyuan Li, Yuesheng Li
Despite the development of new catalysts and synthetic strategies to prepare polyolefin elastomers (POEs), less progress has been made in balancing their elastomeric properties with processability and resistance to heat and solvents.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Self-crosslinking smart hydrogels through direct complexation between benzoxaborole derivatives and diols from hyaluronic acid

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00308E, Paper
Tamiris Figueiredo, Yu Ogawa, Jing Jing, Vanina Cosenza, Isabelle Jeacomine, Johan D. M. Olsson, Thibaud Gerfaud, Jean-Guy Boiteau, Craig Harris, Rachel Auzély-Velty
By tailoring the structure of benzoxaborole (BOR), self-crosslinking hydrogels based on hyaluronic acid (HA) modified with BOR derivatives are obtained for the first time through the direct BOR-HA diol complexation at physiological pH.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Poly(hydroxy acids) derived from the self-condensation of hydroxy acids: from polymerization to end-of-life options

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00088D, Review Article
Elena Gabirondo, Ainara Sangroniz, Agustin Etxeberria, Sergio Torres-Giner, Haritz Sardon
Poly(hydroxy acids) derived from the self-condensation of hydroxy acid are biodegradable and can be fully recycled in a Circular Economy approach.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Cross-linker control of vitrimer flow

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00233J, Paper
Bassil M. El-Zaatari, Jacob S. A. Ishibashi, Julia A. Kalow
The rate of stress relaxation in a vitrimer can be modulated by changing solely the structure of the cross-linker electrophile.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Using the dynamic behavior of macrocyclic monomers with a bis(hindered amino)disulfide linker for the preparation of end-functionalized polymers

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00366B, Paper
Hirogi Yokochi, Rikito Takashima, Daisuke Aoki, Hideyuki Otsuka
End-functionalized polymers were synthesized by simply heating a mixture of a macrocyclic compound with one bis(2,2,6,6-tetramethylpiperidin-1-yl)disulfide (BiTEMPS) moiety and bifunctional acyclic BiTEMPS compounds as sources of repeat units and terminal groups, respectively.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Rapid metal-free synthesis of pyridyl-functionalized conjugated microporous polymers for visible-light-driven water splitting

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00249F, Communication
Zhonghua Cheng, Lei Wang, Yan He, Xingjia Chen, Xiaojun Wu, Hangxun Xu, Yaozu Liao, Meifang Zhu
A rapid metal-free synthetic approach was applied to synthesize pyridyl-functionalized conjugated microporous polymers (PCMPs) via an aminative cyclization between aryl aldehydes and ketones without any metal catalysts.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Preparation of aryl polysulfonates via a highly efficient SuFEx click reaction, their controllable degradation and functionalized behavior

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00435A, Communication
Zhenlei Cao, Feng Zhou, Pei-Yang Gu, Dongyun Chen, Jinghui He, John R. Cappiello, Peng Wu, Qingfeng Xu, Jianmei Lu
Polysulfonates obtained from SuFEx click reaction can be degraded using DBU. The degradation process was further utilized to prepare functional polymers.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Highly active bimetallic nickel catalysts for alternating copolymerization of carbon dioxide with epoxides

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00174K, Paper
Yu-Chia Su, Chih-Hsiang Tsui, Chen-Yen Tsai, Bao-Tsan Ko
Catalyst 1 was reported for the first time to be effective for nickel-catalyzed CO2/CHO copolymerization at 1 atm CO2 pressure.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Enhanced thermomechanical property of a self-healing polymer via self-assembly of a reversibly cross-linkable block copolymer

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00310G, Paper
Hyang Moo Lee, Suguna Perumal, Gi Young Kim, Jin Chul Kim, Young-Ryul Kim, Minsoo P. Kim, Hyunhyup Ko, Yecheol Rho, In Woo Cheong
Introduction of a self-healable block copolymer increases the mechanical property whilst maintaining self-healing efficiency.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Smart functionalized phosphonic acid based copolymers: new structures for old purposes

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00337A, Paper
Xavier Solimando, Yohann Catel, Norbert Moszner, Jean-Jacques Robin, Sophie Monge
Innovative well-defined acidic photopolymerizable phosphorus-based copolymers were prepared and tested in well-known dental applications to improve the adhesion of dental self-etch adhesives (SEAs).
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

A general method to greatly enhance ultrasound-responsiveness for common polymeric assemblies

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00254B, Paper
Jinkang Dou, Ruiqi Yang, Kun Du, Li Jiang, Xiayun Huang, Daoyong Chen
Ultrasound-controlled drug release is a very promising technique for controlled drug delivery due to the unique advantages of ultrasound as the stimulus.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Pillar[5]arene-based self-assembled linear supramolecular polymer driven by guest halogen–halogen interactions in solid and solution states

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00327A, Paper
Talal F. Al-Azemi, Mickey Vinodh
A pillar[5]arene-based linear supramolecular polymer mediated by guest halogen–halogen interactions (C–Br⋯Br–C) was studied in both the solution and solid states.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Hydrogen-bonded supramolecular micelle-mediated drug delivery enhances the efficacy and safety of cancer chemotherapy

Polym. Chem., 2020, 11,2791-2798
DOI: 10.1039/D0PY00082E, Paper
Chih-Chia Cheng, Ya-Ting Sun, Ai-Wei Lee, Shan-You Huang, Wen-Lu Fan, Yu-Hsuan Chiao, Chih-Wei Chiu, Juin-Yih Lai
Multiple hydrogen-bonded supramolecular polymers tend to form stable spherical micelles with oppositely charged anticancer drugs in biological environments, which improves cellular drug uptake and more effectively induces apoptosis in cancer cells.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Polymerization of dopamine accompanying its coupling to induce self-assembly of block copolymer and application in drug delivery

Polym. Chem., 2020, 11,2811-2821
DOI: 10.1039/D0PY00085J, Paper
Yudian Qiu, Zongyuan Zhu, Yalei Miao, Panke Zhang, Xu Jia, Zhongyi Liu, Xubo Zhao
The polymerization of dopamine and its coupling occur in succession, which synergistically induces the self-assembly of block copolymer to yield ordered structures, including micelles and vesicles.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Mussel-inspired coordination functional polymer brushes-decorated rGO-stabilized silver nanoparticles composite for antibacterial application

Polym. Chem., 2020, 11,2822-2830
DOI: 10.1039/D0PY00180E, Paper
Shengnan Zhou, Haixun Ji, Linjing Liu, Sijia Feng, Yuqin Fu, Yu Yang, Changli Lü
A catechol-terminated coordination functional polymer-modified rGO supported AgNPs composite was fabricated. Grafted polymer brushes improve the material's hydrophilicity and dispersion stability of AgNPs on rGO, enhancing antibacterial activity.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Vesicular assemblies of thermoresponsive amphiphilic polypeptide copolymers for guest encapsulation and release

Polym. Chem., 2020, 11,2889-2903
DOI: 10.1039/D0PY00135J, Paper
Mahammad Anas, Somdeb Jana, Tarun K. Mandal
Thermoresponsive amphiphilic polypeptide copolymers are synthesized via different polymerization techniques for their self-assembly into vesicular aggregates for guest encapsulation and release.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Synthesis of a side-chain hole transporting polymer through Mitsunobu post-functionalization for efficient inverted perovskite solar cells

Polym. Chem., 2020, 11,2883-2888
DOI: 10.1039/D0PY00134A, Paper
Liuyuan Lan, Xiang Deng, Jie Zhang, Jingdong Luo, Alex K.-Y. Jen
Mitsunobu post-functionalization was utilized to construct a new efficient dopant-free side-chain hole transporting polymer for inverted perovskite solar cells, exhibiting a power conversion efficiency of 17.75% and a high fill factor over 81%.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Synthesis of biscarboxylic acid functionalised EDTA mimicking polymers and their ability to form Zr(IV) chelation mediated nanostructures

Polym. Chem., 2020, 11,2799-2810
DOI: 10.1039/D0PY00304B, Paper
Meike N. Leiske, Julia A. Walker, Aadarash Zia, Nicholas L. Fletcher, Kristofer J. Thurecht, Thomas P. Davis, Kristian Kempe
We present a new biscarboxylic acid acrylate, which is used for the synthesis of double hydrophilic EDTA-mimicking block copolymers capable of self-assembly upon zirconium complexation.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

A high performance phenyl-free LED photoinitiator for cationic or hybrid photopolymerization and its application in LED cationic 3D printing

Polym. Chem., 2020, 11,2855-2863
DOI: 10.1039/D0PY00142B, Paper
Liqun Tang, Jun Nie, Xiaoqun Zhu
In this work, a high performance LED photoinitiator, 1,3-bis(1-methyl-1H-pyrrol-2-yl)prop-2-en-1-one (BMO), without a benzene ring was synthesized through a one-step aldehyde–ketone condensation reaction.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Tuning polymer properties of non-covalent crosslinked PDMS by varying supramolecular interaction strength

Polym. Chem., 2020, 11,2847-2854
DOI: 10.1039/D0PY00139B, Paper
Open Access
Brigitte A. G. Lamers, Marcin L. Ślęczkowski, Fabian Wouters, Tom A. P. Engels, E. W. Meijer, Anja R. A. Palmans
Linear polydimethylsiloxane (PDMS) is crosslinked by supramolecular grafts to obtain materials with strikingly different mechanical properties by tuning the strength of the non-covalent interactions.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Correction: A facile PEG/thiol-functionalized nanographene oxide carrier with an appropriate glutathione-responsive switch

Polym. Chem., 2020, 11,2923-2923
DOI: 10.1039/D0PY90048F, Correction
Open Access
  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Bingjie Hao, Wei Li, Sen Zhang, Ying Zhu, Yongjun Li, Aishun Ding, Xiaoyu Huang
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Aromatic thioketone-mediated radical polymerization of methacrylates and the preparation of amphiphilic quasi-block copolymers

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00322K, Paper
Haoyu Yu, Jianwei Shao, Dong Chen, Li Wang, Wantai Yang
TfXT exhibits strong ability to control radical polymerization of methyl methacrylate and has been used in preparing amphiphilic quasi-block copolymer.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Alternating ring-opening copolymerization of epoxides with saturated and unsaturated cyclic anhydrides: reduced viscosity poly(propylene fumarate) oligomers for use in cDLP 3D printing

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00453G, Paper
Yongjun Shin, Matthew L. Becker
A ring-opening copolymerization of propylene oxide with saturated and unsaturated anhydrides using Mg(BHT)2(THF)2 catalyst followed by an isomerization yields poly(propylene fumarate) (PPF) oligomers with improved properties for 3D printing.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Sequential and alternating RAFT single unit monomer insertion: model trimers as the guide for discrete oligomer synthesis

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00390E, Paper
Ruizhe Liu, Lei Zhang, Zixuan Huang, Jiangtao Xu
A complete set of model trimers and their synthetic kinetics are established to guide the synthesis of diverse sequence-defined polymers.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Hierarchical self-assembled nanostructures of lactone-derived thiobarbiturate homopolymers for stimuli-responsive delivery applications

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00367K, Paper
Piyali Mandal, Diptendu Patra, Raja Shunmugam
Hierarchical self-assembled nanostructures of lactone-derived thiobarbiturate homopolymers for stimuli-responsive delivery applications are shown.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Self-assembly of strawberry-like organic–inorganic hybrid particle clusters with directionally distributed bimetal and facile transformation of the core and corona

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00237B, Paper
Shuxing Mei, Mingwang Pan, Juan Wang, Xiaopeng Zhang, Shaofeng Song, Chao Li, Gang Liu
Controllable structure of organic–inorganic hybrid particle clusters were successfully fabricated by self-assembly which derived from the strong interaction between carboxyl groups of the organic particles and amino groups of the inorganic particles.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

A 3D printed drug delivery implant formed from a dynamic supramolecular polyurethane formulation

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00068J, Paper
S. Salimi, Y. Wu, M. I. Evangelista Barreiros, A. A. Natfji, S. Khaled, R. Wildman, L. R. Hart, F. Greco, E. A. Clark, C. J. Roberts, W. Hayes
Prototype drug eluting implants have been 3D printed using a supramolecular polyurethane-PEG formulation. The implants are capable of releasing a pharmaceutical active with effective drug release over a period of up to 8.5 months.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Multi-photon polymerization of bio-inspired, thymol-functionalized hybrid materials with biocompatible and antimicrobial activity

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00281J, Communication
Open Access
Kostas Parkatzidis, Maria Chatzinikolaidou, Eleftherios Koufakis, Maria Kaliva, Maria Farsari, Maria Vamvakaki
Thymyl-methacrylate functionalized, hybrid 3D scaffolds, fabricated by multi-photon lithography, exhibit excellent biocompatibility and antimicrobial action for bone and dental tissue engineering.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Correction: Flow-facilitated ring opening metathesis polymerization (ROMP) and post-polymerization modification reactions

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY90065F, Correction
Open Access
  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Selesha I. Subnaik, Christopher E. Hobbs
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Fluorescent chemosensors based on conjugated polymers with N-heterocyclic moieties: two decades of progress

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00336K, Review Article
Open Access
  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Taisheng Wang, Na Zhang, Wei Bai, Yinyin Bao
A brief summary of representative fluorescent chemosensors based on conjugated polymers with N-heterocyclic moieties, followed by a discussion on the limitations and challenges of current systems, as well as possible future research directions.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Optimizing the Thermoelectric Performance of Conjugated Polymer Backbones via Incorporating Tailored Platinum (II) Acetylides

Polym. Chem., 2020, Accepted Manuscript
DOI: 10.1039/D0PY00464B, Paper
Chunfa Liu, Xiaojun Yin, Jianwen Liu, Chunmei Gao, Lei Wang
Efforts to improve the electrical conductivity (σ) of the organic semiconductors propose the critical challenge for high performance organic thermoelectric (TE) devices. Herein, five new conjugated polymers incorporated with different...
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Photo-induced copper mediated copolymerization of activated-ester methacrylate polymers and their use as reactive precursors to prepare multi-dentate ligands for the water transfer of inorganic nanoparticles

Polym. Chem., 2020, 11,2969-2985
DOI: 10.1039/D0PY00212G, Paper
Binh T. Mai, Markus J. Barthel, Aidin Lak, Tommaso Avellini, Ana Maria Panaite, Emille M. Rodrigues, Luca Goldoni, Teresa Pellegrino
Polymers bearing activated ester groups are synthesized using photo-ATRP and used as precursors for direct synthesis of multi-phosphonic acid functionalized ligands which are able to transfer different nanoparticles with distinct cores into water.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Viscoelastic and thermoreversible networks crosslinked by non-covalent interactions between “clickable” nucleic acid oligomers and DNA

Polym. Chem., 2020, 11,2959-2968
DOI: 10.1039/D0PY00165A, Paper
Alex J. Anderson, Heidi R. Culver, Stephanie J. Bryant, Christopher N. Bowman
An approach to efficient and scalable production of oligonucleotide-based gel networks is presented.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Effects of tacticity and chiral center-to-dipole distance on mesogen-free liquid crystalline self-assembly of sulfonyl-containing comb-like polymers

Polym. Chem., 2020, 11,3018-3031
DOI: 10.1039/D0PY00199F, Paper
Caleb A. Bohannon, Man-Hin Kwok, Ruipeng Li, Lei Zhu, Bin Zhao
Mesogen-free comb-like polyethers bearing strongly interacting mono- and di-sulfonylated side chains exhibit well-defined liquid crystalline self-assembly.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Development and disassembly of single and multiple acid-cleavable block copolymer nanoassemblies for drug delivery

Polym. Chem., 2020, 11,2934-2954
DOI: 10.1039/D0PY00234H, Review Article
Arman Moini Jazani, Jung Kwon Oh
Acid-degradable block copolymer-based nanoassemblies are promising intracellular candidates for tumor-targeting drug delivery as they exhibit the enhanced release of encapsulated drugs through their dissociation.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Synthesis of well-defined heteroglycopolymers via combining sequential click reactions and PPM: the effects of linker and heterogeneity on Con A binding

Polym. Chem., 2020, 11,3054-3065
DOI: 10.1039/D0PY00302F, Paper
Meina Liu, Xingyou Wang, Dengyun Miao, Caiyun Wang, Wei Deng
A versatile post- polymerization modification strategy to synthesize well-defined glycopolymers via the combination of RAFT polymerization and sequential CuAAC and thiol–ene click reactions was developed.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Metal-free polycycloaddition of aldehyde-activated internal diynes and diazides toward post-functionalizable poly(formyl-1,2,3-triazole)s

Polym. Chem., 2020, 11,3075-3083
DOI: 10.1039/D0PY00193G, Paper
Baixue Li, Anjun Qin, Ben Zhong Tang
A metal-free polycycloaddition of aldehyde-activated internal diynes and diazides was successfully established and post-functionalizable poly(formyl-1,2,3-triazole)s were readily produced.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Metallopolymer-block-oligosaccharide for sub-10 nm microphase separation

Polym. Chem., 2020, 11,2995-3002
DOI: 10.1039/D0PY00271B, Paper
Satoshi Katsuhara, Hiroaki Mamiya, Takuya Yamamoto, Kenji Tajima, Takuya Isono, Toshifumi Satoh
The novel high-χ BCPs comprising poly(vinyl ferrocene) and oligosaccharides formed hexagonal cylinder morphology with d values of ∼8 nm. Lamellar morphology with d values of ∼9 nm was also realized by mixing these polymers and glucose.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Double-click synthesis of polysiloxane third-order nonlinear optical polymers with donor–acceptor chromophores

Polym. Chem., 2020, 11,3046-3053
DOI: 10.1039/C9PY01771B, Paper
Zhitao Li, Dong Wang, Daniele Ramella, Hong Gao, Hui Cao, Yuzhen Zhao, Zongcheng Miao, Zhou Yang, Wanli He
A series of third-order nonlinear polysiloxane polymer materials were prepared by thiol–ene click polymerization and [2 + 2] click chemistry. All the polymers exhibit good electron transfer capabilities and nonlinear optical properties.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Two-stage thiol-based click reactions for the preparation and adhesion of hydrogels

Polym. Chem., 2020, 11,2986-2994
DOI: 10.1039/C9PY01503E, Paper
Wen Jing Yang, Wenya Xu, Xi Tao, Wen Wang, Yaqin Hu, Xue Li, En-Tang Kang, Lianhui Wang
Two-stage thiol-based click reactions have been employed as a facile strategy for hydrogel preparation and self-adhesion.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Gold nanoparticles standing on PEG/PAMAM/thiol-functionalized nanographene oxide as aqueous catalysts

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00471E, Paper
Bingjie Hao, Guolin Lu, Sen Zhang, Yongjun Li, Aishun Ding, Xiaoyu Huang
Gold nanoparticles were aptly in situ grown on PEG/PAMAM/thiol-functionalized nanographene oxide platforms for aqueous catalysis.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Polymerization-induced self-assembly for the fabrication of polymeric nano-objects with enhanced structural stability by cross-linking

Polym. Chem., 2020, Accepted Manuscript
DOI: 10.1039/D0PY00368A, Review Article
Wen-Jian Zhang, Jamshid Kadirkhanov, Chang-Hui Wang, Sheng-Gang Ding, Chun-Yan Hong, Fei Wang, Ye-Zi You
Polymerization-induced self-assembly (PISA) has been established as a robust strategy to synthesize block copolymer nano-objects with varying morphologies, size, and surface chemistry, which greatly enlarges the library of functional nano-objects...
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Effect of the side, ethylene glycol and hydroxyl groups on the polymerization kinetics of oligo(ethylene glycol methacrylates). An experimental and modeling investigation

Polym. Chem., 2020, Accepted Manuscript
DOI: 10.1039/D0PY00498G, Paper
Mohammad Siddiqui, Dimitris Achilias, Halim Hamid Redhwi
Polymers based on methacrylates bearing short oligo(ethylene glycol) side parts constitute a modern class of stimuli-responsive, biocompatible materials exhibiting several important biological applications. A study of their polymerization kinetics considering...
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Light and Latex: Advances in the photochemistry of polymer colloids

Polym. Chem., 2020, Accepted Manuscript
DOI: 10.1039/D0PY00349B, Review Article
Philip Scott, Christopher Kasprzak, Keyton Feller, Viswanath Meenakshisundaram, Christopher Williams, Timothy Long
Unparalleled temporal and spatial control of colloidal chemical processes introduces immense potential for the manufacturing, modification, and manipulation of latex particles. This review highlights major advances in photochemistry, both as...
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Morphological Evolution and Mechanical Properties of "Anchor Chain" Nanodomain Structure of Reactive Amphiphilic Triblock Copolymer in Epoxy Resin

Polym. Chem., 2020, Accepted Manuscript
DOI: 10.1039/D0PY00365D, Paper
Quan Zhou, Qi Liu, Yueru Yu, Yuxiao Zhuang, Yizhe Lv, Hanliang Xiao, Ning Song, Lizhong Ni
A novel epoxy-reactive amphiphilic poly(3,4-epoxy cyclohexyl methyl methacrylate)-block-poly(dimethylsiloxane)-block-poly(3,4-epoxy cyclohexylmethyl methacrylate) (PMETHB-b-PDMS-b-PMETHB) triblock polymer was synthesized via atomic transfer radical polymerization (ATRP) with a controlled molecular chain length and low dispersion,...
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Controlling the crystal structure of precisely spaced polyethylene-like polyphosphoesters

Polym. Chem., 2020, Accepted Manuscript
DOI: 10.1039/D0PY00272K, Paper
Open Access
  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Tobias Haider, Oksana Suraeva, Miriam Leslie O'Duill, Julian Mars, Markus Mezger, Ingo Lieberwirth, Frederik R Wurm
Understanding polymer crystallization is important for polyethylene-like materials. A small fraction of monomers with functional groups within the polyethylene chain can act as crystallization “defects”. Such defects can be used...
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Design of new phenothiazine derivatives as visible light photoinitiators

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00497A, Paper
Mahmoud Rahal, Mira Abdallah, Thanh-Tuân Bui, Fabrice Goubard, Bernadette Graff, Frédéric Dumur, Joumana Toufaily, Tayssir Hamieh, Jacques Lalevée
In this article, four new phenothiazine derivatives (denoted as PT1, PT2, PT3 and PT4) are specifically in silico designed by molecular modelling for good light absorption properties @405 nm.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




li

Alicyclic Polyesters from a Bicyclic 1,3-Dioxane-4-one

Polym. Chem., 2020, Accepted Manuscript
DOI: 10.1039/D0PY00448K, Paper
Yuechao Xu, Theona Șucu, Mitchell Perry, Michael Patrick Shaver
Alicyclic polymers with in-chain aliphatic rings promote improved thermal and optical performance due to backbone rigidity but remain limited in their functional diversity. In this paper we report the first...
The content of this RSS Feed (c) The Royal Society of Chemistry