A battery powered, hand-held, lightweight electrical shocking device provides a visible and audible display of sparks continuously upon the operation of a switch. The device is capable of delivering a jolting shock. The display of sparks makes clear the nature of the device and serves as a deterrent to unruly persons. The device is comprised of a non-conductive housing in a generally annular shape, permitting it to be gripped in one hand. On one surface away from the hand are first and second conductive plates separated from each other by an insulator. The electrical circuit comprises a free-running multi-vibrator, a small transformer, a rectifier, a voltage doubler and an internal spark gap. The circuit can deliver a series of short duration, high voltage, low current electrical shocks from two penlight batteries.

A knock down spring whip assembly including a hollow housing which serves as a handgrip, and also stores a spring subassembly formed of lengths of helically wound springs of sequentially increasingly larger diameter size to move between a telescoped position within the housing and an extended whipping position projecting from one end of the housing with the springs wedgingly engaging each other in an end to end arrangement. A removable closure unit is provided for plugging the other end of the housing to define a storage compartment. The closure unit includes an integral magnet for retaining the spring subassembly in the telescoped position, where the closure unit can be replaced with other types of closure units. The housing includes a tapered end and an annular constriction for providing both a wedging engagement of the projecting springs as well as a positive locking action. Weighted ball bearings can be included within one of the springs for spiral rotation therethrough to provide an additional striking force. The striking spring can be replaced by a solid rod for an increased striking force. Preferably, the tip portion at the striking end is also removable to permit the spring whip assembly to be disassembled into its component parts.

A knock down spring whip assembly including a hollow housing which serves as a handgrip, and also stores a spring subassembly formed of lengths of helically wound springs of sequentially increasingly larger diameter size to move between a telescoped position within the housing and an extended whipping position projecting from one end of the housing with the springs wedgingly engaging each other in an end to end arrangement. A removable closure unit is provided for plugging the other end of the housing to define a storage compartment. The closure unit includes an integral magnet for retaining the spring subassembly in the telescoped position, where the closure unit can be replaced with other types of closure units. The housing includes a tapered end and an annular constriction for providing both a wedging engagement of the projecting springs as well as a positive locking action. Weighted ball bearings can be included within one of the springs for spiral rotation therethrough to provide an additional striking force. The striking spring can be replaced by a solid rod for an increased striking force. Preferably, the tip portion at the striking end is also removable to permit the spring whip assembly to be disassembled into its component parts.

An animal defensive barrier device comprising a hand-grip portion having end caps; a strap connected to the hand-grip through one of the end caps; a loop portion distal at one end of the hand-grip and a loop portion distal from the first loop end; a plurality of knots between the hand-grip and the distal loop portion; and a plurality of sleeves on the strap between the hand-grip portion and the distal loop portion.

The present invention provides an electrically chargeable garment having a pair of leggings having an outer layer with a pair of closely spaced electrical terminals of opposite polarity disposed on the outer surface of the outer layer. There is also provided means for attaching the leggings to a wearer and means for adjustably supporting the leggings from the wearer.

A personal protection device includes a belt which conceals a whip in an internal sheath formed therein. The whip has a handle which also is concealed by an end portion of the belt. The whip can be quickly and easily withdrawn from the sheath in the belt by releasing the end portion and grasping the handle, all in a substantially single motion. The whip material allows sufficient flexibility to be worn comfortably around the waist, but is rigid enough to be an effective striking device. Embodiments for sports and uniform use are disclosed.

A whip with a braided handle and method of fabrication which includes a generally cylindrical handle portion. The handle portion has an inboard end and an outboard end and is fabricated of a braided rope construction which comprises a plurality of single yarns twisted together to form a plurality of piled yarns which are then braided, with a helical angle of the twist of the single yarns within their respective plied yarn being equal and opposite to the helical angle of the plied yarns in the braid. Also included is an inboard first thread which is wrapped circumferentially about the handle end from adjacent the inboard end and extends outboardly. An outboard second thread is wrapped circumferentially around the handle portion to provide a handle. A whipping portion extends outboardly of the outboard end of the handle portion and is fabricated of extensions of the braided strands from the handle portion but in an unbraided braid form.

A battery operated hand held device for use in handling or controlling livestock, particularly cattle, swine, sheep and horses. This invention provides a novel alternative to conventional electric livestock prods, which deliver an electric shock to the animal. While operating on the principle of external stimulus to invoke a flight response, this invention relies on vibration and/or sound rather than painful electric shock. This unique mode of action satisfies the needs in the livestock industry for low stress handling equipment and techniques with the welfare of the animal as a priority.

Disclosed is a container system that is adapted to be accessed by horse mounted users. The container system finds particular application in storing equestrian implements, such as riding crops. The container is mounted at an elevated height upon a fence and additionally includes rounded forward faces. Thus, the container is easy to access by riders and presents less of a danger to the horse and its rider. Furthermore, the container is advantageously formed from a weather resistant plastic material.

The invention provides a device for use in partially or fully immobilizing animals such as cattle, sheep and the like. The device includes a probe for insertion in the anal canal of the animal the probe comprising a pair of spaced electrodes connected by way of electrical conductors to a power source. The power source providing a pulsed electrical current having a voltage of between 2 and 10 Volts and a frequency of between 20 and 50 Hz to the electrodes.

The invention provides a device for use in partially or fully immobilizing animals such as cattle, sheep and the like. The device includes a probe for insertion in the anal canal of the animal the probe comprising a pair of spaced electrodes connected by way of electrical conductors to a power source. The power source providing a pulsed electrical current having a voltage of between 2 and 10 Volts and a frequency of between 20 and 50 Hz to the electrodes.

An extendable electronic discharge staff will consist of a central sliding member translating within a tubular body member to be positioned by the means of a spring-loaded ball detent. When the central sliding member is positioned, it will be locked in place by the means of a locking nut at the distal end of the tubular body member. A forward adjustable handgrip will be located and locked into position along the length of the tubular body member to accommodate the size and comfort of the person using the device. By rotating the rear hand grip, the device will be turned on or off, and by sliding the rear handgrip forward or backward a high or low voltage will be delivered to the distal contact end of the central sliding member. On an alternate embodiment having three contact positions, the default center position delivers low voltage while both forward and backward outer positions deliver high voltage. This action gives the operator two different voltage capabilities along with a visible snapping arc to indicate the potential of the device. A sealed cylindrical housing fixed to the rear of the tubular body member will house a removable battery pack and electronic control module. The device is capable of giving a momentary delivery, a prolonged delivery, or several prolonged deliveries and has been designed not to stun an individual unless necessary, giving the unruly individual several warnings in advance.

A device designed to prod livestock is intended to create an audible sound to aid in the controlled movement of animals. The device takes the form of a long pole comprising an upper end provided with a comfortable handle and a wrist strap and a lower end provided with a whistle. To use, the user would hold the device by the handle in one hand and whip it in a fast, circular motion, causing the whistle to make a sound. When done near an animal, the sound will cause the animal to move away, thus allowing the user to control the movement of the animal. The device is suitable for use by farmers, ranchers, auctioneers, herdsmen, or anyone who loads or moves livestock.

The present invention relates to a gum dispenser for automatically dispensing gum by the vertical lifting of a gum case. Particularly, the present invention provides a container that has a self-sealing means, accurately dispenses a piece of gum one by one, prevents the generation of container defects, and provides ease of operation and molding. Currently, in the above operation structure, an inner case receiving gum therein is fitted in a lifting shaft of an outer case to be lifted or lowered so that a piece of gum is pushed up to an upper end of the lifting shaft, and then the gum is exposed to a dispensing hole perforated in a lid, which is coupled with the inner case, one by one for a user to enjoy. The above structure, however, has a disadvantage in that if two pieces of gum are lifted to the upper end of the lifting shaft and the lifting shaft is exposed to the perforated hole of the lid, then the lifting shaft and the dispensing hole correspond to each other 1:1 so that the two pieces of gum pop out, which makes the gum difficult to catch. In addition, if the lifting shaft is molded integrally with the outer case, the lifting shaft is likely to be twisted or bent due to the thickness thereof in the cooling procedure during the molding thereof so that it is difficult to achieve a precisely standing structure. Furthermore, if the inner case is repetitively lifted or lowered in the outer case, an outer force may be applied in the lifting motion according to a vacuum state, so that smooth operation becomes impossible and longer molding time is required in the molding. In addition, in the state that the lid is sealingly coupled with the outer case and the inner case for the sealing of the container during storage or delivery thereof, a perforated lid for implementing the dispensing hole may be pressed by the lifting shaft and the container may burst. If the perforated lid is formed to be thick in order to prevent the bursting, a pulling portion to be pulled for cutting the perforated lid is likely to be cut, and implementation of the dispensing hole may fail. As a result, the present invention is aimed at resolving the above problems.

A label dispenser having a body and a hinged lid attached thereto. The lid is held in a closed position by way of magnets. The interior of the body has guides that hold label packs in a vertical arrangement. The labels and liner are passed between the body of the dispenser and the lid.

The present invention provides a system that allows an easy and quick exchange of small batteries of hearing devices as well as a method for exchanging a battery of a hearing device that combines the installation of a new battery into the hearing device with the deinstallation of the battery to be replaced from the hearing device in a single action using a single mechanism. The inventive battery exchange system comprises a carrier module 1, which features a hearing device receiving means shaped to receive a part of a hearing device 4 and a battery passage that traverses the carrier module 1, a battery dispensing module 2 adapted to accommodate at least one battery 7 and a battery ejection means 3 adapted to eject a battery 7 from the battery dispensing module 2 into the battery passage of the carrier module 1.

A paper towel cabinet includes a first side wall and a second side wall, a pivotally mounted front wall defining a door, a back wall extending between the side walls, and a paper towel tray having an opening to provide access to paper towels. The paper towel cabinet also includes a module assembly comprising a first module having a front surface extending transversely relative to the first side wall and toward the second side wall. When the door is in an open position, the front surface prevents paper towels leaning toward the door from falling out of the cabinet. The cabinet also includes a bar mounted proximate to the opening and having a length extending between the side walls. The bar is positioned between a stack of paper towels and the opening when the stack of paper towels is placed on the paper towel tray.

In order to provide a card case in which cards can be automatically and promptly discharged one by one, the case has a case body capable of accommodating more than one cards inside, a card discharging plate mounted so as to proceed from and retreat into the case body via a card discharging opening provided on a side portion of the case body, with a card being placed on its upper surface, and an elastic piece for movably urging the card discharging plate in one direction.

A fire pit includes a circular bottom plate and a circular, centrally-apertured log-supporting plate. A plurality of legs secured about the periphery of the log-supporting plate maintain the bottom and log-supporting plates in vertically spaced, parallel relation to one another. Each leg has a hollow uppermost end. A plurality of arcuate grates is mounted about the periphery of the log-supporting plate and a vertically-oriented post is secured to each of the grates, mid-length thereof. Each of the posts has a lowermost end slideably received within the hollow uppermost end of its associated leg to releasably connect each grate to the log-supporting plate. Arcuate openings positioned radially outwardly of the central opening enhance the flow of oxygen into the areas where combustion occurs. The log-supporting plate is inverted and the grates are stacked atop it when the fire pit is in its storage configuration.

A product dispenser including a housing for housing dispensable products in a product reservoir defined by the housing and a cover member defining a dispensing opening through which the products are dispensed. The cover member includes a lid member and a support member and the lid member is openable relative to the support member about a hinge. The cover member is removably mountable to the housing by at least one engagement member of the support member engaging at least one complementary engagement member of the housing. A strength of connection of the hinge to the support member and a strength of connection of at least one engagement member of the support member for removably mounting the support member to the housing is such that when the lid member is opened to a stop position and further opening force is applied to the lid member, at least one engagement member dismounts between the housing and the support member before the force gets so great as to break the hinge.

A station combines a toilet paper dispenser, dispenser for dispensing hand wipes, a dispenser for dispensing surface antibiotic wipes, and a deodorant feature. The station includes a toilet paper dispenser made from a plastic type material and the toilet paper dispenser may be a single or double roll dispenser. The station cover houses a battery-operated fan that pulls air from inside the dispenser. A tray inside the dispenser holds a fragrance cup holding a quantity of deodorant. The base holds one or two rolls of commercial toilet paper, each of which rolls on a hollow plastic axle to hold a bottle containing wipes. A microswitch may be integrated in the cover to disengage the fan when the cover of the unit is open.

Disc dispensing device for dispensing discs impregnated with antibiotics onto a culture dish. The device comprises a stationary support on which a magazine is removably mounted. The magazine holds a plurality of tubular containers each containing a stack of discs to be dispensed. A moving means moves one disc from a bottom end of a tubular container to a pick-up position. From the pick-up position a transfer means picks up said one disc and transfers it to the culture dish where it is dispensed. The removable culture dish is supported by a moveable carriage which is mounted on the stationary support. The carriage is moveable relative to the magazine from a starting position to an operating position and vice versa. Control means control the operation of the device. The plurality of tubular containers is rotatable around a magazine center under control of the control means.

A control system for a common access cabinet having a plurality of drawers and electrically controlled latches. Each latch corresponds to one drawer and is configured to receive an electrical signal. The electrical signal contains an address assigned to a particular drawer. When a latch receives a signal that defines the address of the drawer to which that latch corresponds, the latch unlocks that corresponding drawer. The latches receive the signals over an asynchronous serial interface bus. A user input device receives user identification data that is processed by a processor device to determine if the user is authorized to access any of the drawers. If the user is authorized, the processor device generates a signal that contains an address that corresponds to a drawer identified in the user identification data. The signal is converted to an asynchronous serial signal which is routed to the asynchronous serial interface bus.

A method and device for feeding beads in a tobacco industry system including a bead container, a bead feeding unit having a plurality of channels for supplying a plurality of bead streams, a unit for transferring the beads to the filter material, where the beads are fed from holding pockets of the bead feeding unit to receiving pockets of the bead transfer unit, in which the beads are supplied from the bead container to a plurality of channels of the bead feeding unit which form holding pockets; the beads are fed from the holding pockets of the bead feeding unit to the receiving pockets of the bead transfer unit and to a delivery wheel by a movable feeding device; the beads are picked up from the receiving pockets by a movable guiding device.

A black powder pellet loader for a revolver. Tip ends of a number of fingers are movable from a closed position to an open position by sliding a thumb bracket toward a main bottom right end tube. One end of a penetrating tube may penetrate through the second end of a sliding raised rib tube, through a reducer adapter and a finger retaining nut until the end of the penetrating tube strikes a downward bend of each of the fingers. The downward bend of the fingers may continue to slide over the penetrating tube, which may force the tip ends of the fingers diverge from the closed position to the open position. Black powder pellets may be inserted between the fingers when in the open position, and upon release of the thumb bracket may be retained in the fingers when in the closed position.

A vending machine to dispense purchased goods includes a frame, a dispensing member, a controlling member, a blocking member and a driving member. The controlling member can slide a limiting shaft between a latched position and a releasing position. The driving member is a spring which is partly uncoiled and which constantly pulls the dispensing member, and thus a line of goods, towards the blocking member. When the limiting shaft is in the latched position, the limiting shaft prevents the blocking member rotating, so holding back the line of unpurchased goods. When the limiting shaft is retracted to the releasing position, the pressure of the line of goods rotates the blocking member through ninety degrees to allow one of the goods to pass out of the goods channel.

A medicine dispensing device includes a shell-like base unit, a shell-like cassette with a number of compartments for storage of medicines which is rotatable relative to the base unit, a unit for rotating the cassette relative to the base unit at predetermined times, a lid firmly connected to the base unit, and an aperture situated in the lid in such a way as to be movable to become central to any desired compartment of the cassette when the cassette is rotated relative to the base unit and the lid. A hatch is provided close to the aperture and can assume a position in which the aperture is closed and a position in which the aperture is exposed. The hatch is pivotable relative to a pivot axis. The hatch has a rear edge which has an extent in the circumferential direction of the device.

Methods, apparatuses and systems for radio frequency identification (RFID)-enabled information collection are disclosed, including an enclosure, a collector coupled to the enclosure, an interrogator, a processor, and one or more RFID field sensors, each having an individual identification, disposed within the enclosure. In operation, the interrogator transmits an incident signal to the collector, causing the collector to generate an electromagnetic field within the enclosure. The electromagnetic field is affected by one or more influences. RFID sensors respond to the electromagnetic field by transmitting reflected signals containing the individual identifications of the responding RFID sensors to the interrogator. The interrogator receives the reflected signals, measures one or more returned signal strength indications (“RSSI”) of the reflected signals and sends the RSSI measurements and identification of the responding RFID sensors to the processor to determine one or more facts about the influences. Other embodiments are also described.

A blade dispenser (100) has a blade supply container (110), a blade disposal container (120), and a detachable and reconnectable connecting means (130, 131, 132) that is embodied to connect the blade supply container (110) and blade disposal container (120) detachably to one another. The blade supply container (110) has a blade supply container upper side and a blade supply container underside, and is embodied to receive a blade stack (111) made up of multiple mutually abutting blades (112, 115). The blade supply container (110) also has a removal opening (116) through which at least one blade (112, 115) of the blade stack (111) is removable from the blade supply container (110). The blade disposal container (120) has a blade disposal container upper side and a blade disposal container underside, and is embodied to receive blades (120) to be disposed of.

A product distribution device for accommodating at least one row of products with products which can be arranged in succession on a support surface of a product guide element in a receiving space with the following features: at least one door for stocking the receiving space with the products, guide means which are guided along the support surface in one conveyance direction F for advancing the products in the conveyance direction F, a catch element which can be switched between one catch position of the conveyance means and one conveyance position of the conveyance means.

A featherboard assembly for use with a work table. The featherboard assembly includes a featherboard having a body and an axis. The featherboard assembly further includes an adjustment mechanism associated with the featherboard for attaching the featherboard to the work table. The adjustment mechanism permits the featherboard to be adjusted on the table along a first axis and permits the featherboard to be adjusted along a second axis. The adjustment mechanism is capable of locking the featherboard against movement along the second axis while the featherboard is moved along the first axis and locking the featherboard against movement along the first axis while the featherboard is moved along the second axis.

A board comprised of a wood structure having a first surface, a second surface, a first lateral edge, a second lateral edge and opposing ends. Sound attenuating elements embedded within the wood structure and stiffening elements positioned within the wood structure to coincide with the location of floor joist to which the board will be secured. The boards further forming a ceiling/floor structure by laying a single set of the boards adjacent to each other and securing them to the floor joists.

The present invention relates to a device for the treatment of a workpiece, in particular of a substantially flat substrate, comprising a table (2) for supporting the workpiece (5), a flow generation apparatus (6, 11) producing a gas flow (22) on a top face (17.1, 17.2) of the table (2) in a region between the workpiece (5) and the top face (17.1, 17.2) of the table (2), on which gas flow the workpiece (5) is supported during the treatment.

Method and apparatus for cutting out balsa blanket parts comprising the following steps: providing on a surface of a conveyor (12) a row of balsa blankets (1) abutting each other end edge to end edge in butt areas at the joining stations (14.1-14.5); interjoining the balsa blankets (1) in the butt areas at the joining stations (14.1-14.5) to form a balsa blanket web; feeding the balsa blanket web in a direction of feed (F) to a cutting station (15) where the balsa blanket web is stepwise conveyed and cut through crosswise at positions to form the desired parts; providing a next row of balsa blankets on the surface of the conveyor when the rearmost end edge on the rearmost blanket of the balsa blanket web is at the last joining station (14.5), said blankets of the next row abutting each other end edge (4) to end edge (5) and the leading end edge of the foremost balsa blanket in the next row of balsa blankets abutting the rearmost end edge of the rearmost balsa blanket in the balsa blanket web; at the joining stations (14.1-14.5) interjoining the next row of the balsa blankets and joining it with the balsa blanket web in the butt areas.

A twin beam shelf including a wood grain support structure defining a first major surface, a second major surface and longitudinally spaced front and rear edges with a rabbet extending along the front and rear edges. The front and rear wood grain beams are configured and arranged for cooperatively engaging the front and rear edges of the support structure to form a flush adhesive joint. The front and rear wood grain beams either extend laterally beyond the second major surface of the support structure or are flush with both surfaces of the support structure.

A woodworking machine includes a base, an adjusting device, and an adjustable worktable. The adjusting device is engaged with the base and includes a platform, a plurality of adjusters, and a plurality of fastening members. The platform is slidably engaged with the base. The plurality of adjusters are adjustable, and the plurality of fastening members are releasably inserted through the plurality of adjustors respectively. The adjustable worktable is engaged with the adjusting device. Moreover, the platform bears the adjustable worktable and the plurality of adjusters are abutted against the adjustable worktable. Additionally, the adjustable worktable is adjustably moved upon adjusting of the adjustors, and prior to adjusting each adjustor, the fastening member engaged therewith is removed.

A wheeled mobile work bench which has an adjustable tabletop surface. The tabletop surface removably engages an adjustable rectangular frame which, in turn, is attached atop a pair of upright frame members, each upright frame member being attached to a respective bottom frame component. An electrical box attached to one of the right and left upright frame members is operationally connectable connected to a power cord having a plug. While the mobile work bench is in use, the plug is operationally connectable to a source of standard electrical current to permit use of a power tool plugged into the electrical box.

Wood particles having fibers aligned in a grain, wherein: the wood particles are characterized by a length dimension (L) aligned substantially parallel to the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L; the L×H dimensions define two side surfaces characterized by substantially intact longitudinally arrayed fibers; the W×H dimensions define two cross-grain end surfaces characterized individually as aligned either normal to the grain or oblique to the grain; the L×W dimensions define two substantially parallel top and bottom surfaces; and, a majority of the W×H surfaces in the mixture of wood particles have end checking.

Embodiments provide a unidirectional multi-path kiln with two or more chambers and generally parallel flow paths extending through the kiln, on opposite sides, from charge entry portals at a first end of the kiln to charge exit portals at a second end of the kiln. Moist heated air flowing from the second heated chamber is received in the first chamber and circulated around the lumber charges with one or more fans. The lumber charges proceed in the same direction on the flow paths through the heated second chamber, which may be an existing kiln. Charge exit portals at the distal end of the kiln and/or intermediate charge portals between the second chamber and a third chamber may be provided with insulating members configured to reduce airflow from the second chamber through the charge exit portals.

A device for at least one self-heated and dense ceramic tube for gas separation. The device includes at least one dense ceramic tube in an environment accessible to a mixture of gases, the at least one tube acting as a diffusion membrane for separating at least one gas from the mixture of gases. Two electrical contacts are provided which allow connecting a power supply to the ceramic tube and driving an electric current through the ceramic tube. The contacts can be in the farm of short coils wrapped around the ceramic tube at difference places. When a voltage is applied to the contacts, an electrical current flows from one contact to the other through the ceramic tube. The current in the ceramic tube heats the tube. Thus, the tubes heat themselves. The hot tube allows separating a gas from the mixture of gases. The driving force for the diffusion is achieved by a pressure difference generated by pumping at the side of the separated gas and pressing at the side of the mixture of gases.

This application is directed to groove milling devices for milling a groove in a component. In one example, a groove milling device includes a milling disk which is rotatable about a rotational axis, wherein the groove milling device comprises a displacement device for moving the milling disk along the rotational axis during the milling process. In an example, the groove milling device may include a control device which actuates the displacement device automatically when a predetermined depth of the milled groove is reached during the milling process. In an example, the groove milling device may include a switch for activating the displacement device by an operator during the milling process. In an example, the energy required for actuating the displacement device may be generated by a generator coupled to a main drive spindle of the groove milling device.

A simulation apparatus includes a storing unit that stores therein information about a shape of a blank piece to be cut out from raw wood, information about a final shape of a wooden piece obtained by compressing the blank piece, and image data of a surface of the blank piece. The apparatus also includes detecting unit that detects a knot appearing on the surface of the blank piece by image recognition using the image data; a shape estimating unit that estimates a shape of the detected knot using shape information on the blank piece; and a determining unit that determines, in accordance with the shape of the estimated knot, a cutting location and a cutting shape of the blank piece in such a manner that the cutting location and shape include a part and a thickness of the knot is substantially the same as that of the compressed blank piece.

A cutting device for cutting a material grappled by a grapple member of a grapple device is mounted on one side wall portion of a bucket which is pivotable vertically with respect to an arm swung vertically and is rotatable on an axis in an extension direction of the arm. The cutting device includes a cutting blade which is positioned outside or inside a side wall of the bucket and is pivotally supported on a base end portion of the open mouth portion of the bucket to be pivoted in a direction along the side wall from a position separated from an opening edge of the bucket to a position along the side wall of the bucket. A hydraulic cylinder is provided on a rear surface portion of the bucket and is connected to a pivoting base portion of the blade.

A support stand for movable support of a power tool features the use of rollers to support a tool mount along an elongated track. The track features a cover arrangement disposed over the surfaces on which the rollers move so as to avoid sawdust or other debris from building up on the track and interfering with smooth rolling motion of the tool mount. The stand is assembled in a working position by attaching two stand sections end to end to form the track, and is also configured for arrangement into a collapsed condition in which the stand sections stack one atop the other for space efficient storage and convenient transport.

A board straightening tool able to provide the force to straighten bent boards by simultaneously maintaining a grasping connection to both the joist being used to support the straightening device and the board being fastened to that joist, and maintaining a clearance between the straightening tool and board for the use of an Install the fastening device on the same joist that the tool is using for support is required to obtain the straightest installed boards possible and to maintain the maximum straightness of the deck board after the straightening device is released. The grasping pins are constructed either from a knurled metal for more grasp power or have a smooth surface providing for a reduction of marring of the joist. The tool also provides the force required to maintain consistently spaced gaps between the boards for a more desirable appearance.

A waste strip-removing apparatus for use with a ripsaw that saws an incoming board into one or more usable boards and removes the opposite side edges, which become two waste strips that must be removed and transported to a different destination from that to which the usable board(s) is (are) transported. The apparatus includes two air-blasting units each having one or more air nozzles assigned to each waste strip. The air-blasting units are positioned with respect to a lateral direction by a positioning mechanism so that air directed from the nozzles impinges on the waste strips and moves them laterally away from the usable board(s). The positioning mechanism can include a linear motor having two forcers movable along a platen and respectively attached to air-blasting units.

A gouging machine for cane includes: (a) a base; (b) a cane bed, having a trough disposed parallel to a bottom surface of the cane bed, and having grooves on opposing sides thereof that slope at a groove angle with respect to the bottom surface of the cane bed, the cane bed being affixed to the base so that the trough is parallel to a top surface of the base and to a predetermined line; and (c) clamps, disposed on the opposing sides of the cane bed, each clamp having a tongue that slopes at the groove angle with respect to a clamping surface thereof, which clamping surface is adapted to grip edges of cane placed in the trough of the cane bed, and wherein the tongues of the clamps slidably engage the grooves of the cane bed so that the clamping surface of the clamps are parallel to a bottom of the trough.

An automated lumber handling system laser-scans the top profile of multiple stacks of lumber, each of which contain boards of a unique size. Based on the scanned profiles, the system determines the order in which individual boards from a chosen stack should be transferred to a numerically controlled saw. The saw cuts the boards to proper size, and in the proper sequence to facilitate orderly assembly of a roof truss or prefabricated wall. In some examples, the system lifts individual boards by driving two retractable screws, or some other piercing tool, down into the upward facing surface of the board. A track mounted cantilever, holding the screws and a laser unit, translates over the lumber stacks to retrieve and deliver individual boards and, while doing so, the laser repeatedly scans the stacked lumber profiles on-the-fly to continuously update the profiles. The open cantilever design facilitates replenishing the stacks of lumber.

A table tool includes a table which carries a power tool. The table includes table base and a table top. The table top includes a central table top portion fixed to the table base. The central table top portion of the table top includes a left perimeter, a right perimeter, and a rear perimeter. A first table top extension is configured to be selectively coupled to the table on the left perimeter, and the right perimeter of the central table top portion with the first table top extension slideable relative to the central table top portion. A second table top extension is configured to be selectively coupled to the left perimeter, the right perimeter, and the rear perimeter of the central table top portion with the second table top extension fixed relative to the central table top portion.

A method of assembling a structure of timber lengths, e.g. roof trusses, includes a number of upper and lower structure lengths or pieces, as well as a number of diagonals or braces etc., in which the timber lengths are laid out and fixed to one another. The structure formed from the timber lengths fixed to one another is observed by a first camera for positional determination of the structure and comparison of observation data with structure data and for controlling at least a second camera. The structure is fed into a unit for pressing in place of jointing pieces, e.g. corrugated fasteners, over the joints between the timber lengths by at least one positionable press unit, and the second camera observes the infed structure and positions the press unit at the correct position over a joint for pressing in place of a jointing piece.