Adsorptive media for chromatography, particularly ion-exchange chromatography, derived from a shaped fiber. In certain embodiments, the functionalized shaped fiber presents a fibrillated or ridged structure which greatly increases the surface area of the fibers when compared to ordinary fibers. Also disclosed herein is a method to add surface pendant functional groups that provides cation-exchange or anion-exchange functionality to the high surface area fibers. This pendant functionality is useful for the ion-exchange chromatographic purification of biomolecules, such as monoclonal antibodies (mAbs).

A fluid filter assembly with sight glass provides an upper housing carrying a transparent sight glass for visualizing the interior of the filter assembly and fluids passing therethrough. A sight glass retainer secures the sight glass within the upper housing. A screen filter is carried between the upper housing and a mating lower housing. A fluid inlet port is defined in the upper housing above the screen filter and a fluid output port is defined in the lower housing below the screen filter. The sight glass retainer carries plural fluid deflectors and plural sight glass supports for fluid dispersion and fluid cooling. A pressurized air input communicating with fluid inlet port allows pressurized air to be injected into the assembly to force fluids through the screen filter and out of the filter assembly. A low pressure drain valve and a bypass valve are carried in the lower housing.

This is a scalable water cleansing system intended for very low technology primitive communities buildable for between $600 and $1,000 of parts. A gravity feed system is contemplated with one or more of an initial filtering stage(s), a settling stage, a UV treatment stage, and an ozonator stage. A stand-alone power system with solar power needing no infrastructure is contemplated to enhance purification. The system can improve the worst of water quality, including for small groups; and under some conditions to end up with clean water of a quality found in developed countries with mature water systems. For water to the site in communities with low precipitation, the water brought in would be emptied into the initial stage of the water cleansing system, and the person who brought the water would draw from the last stage most or all of the amount of water carried in.

A device for filtering liquids has a container, units for introducing a liquid to be filtered into the container, a container outlet for unfiltered liquid to be discharged from the container, and at least one rotor, which is drivable to rotate around the container axis. The rotor has a hollow shaft mounted in an end wall and a support device fastened thereon for filter elements, which are arranged with a clearance to the container axis or rotate around their own axis. The interior of the filter elements opens via the support device and the hollow shaft out of the container as the discharge for filtered liquid. To provide improved filtration conditions, the container internal radius of the inner wall of the container circumferential shell is enlarged up to a maximum in the container circumferential direction while bulging the inner wall between two minima. The bulge forms a guide unit which guides the liquid toward the filter elements.

Disclosed herein are an apparatus and method of increasing dialysis dose and waste removal with the introduction of mechanical energy, such as vibration, to a hemodiafiltration membrane The method generally includes providing a dialyzer that includes a vibration element in engaged vibratory communication with a hemodiafiltration membrane The method also includes enabling extracorporeal flow of pre-dialyzed blood and a dialysate through the dialyzer and respectively past opposing surfaces of a vibrating hemodiafiltration membrane to achieve a solute clearance from the pre-dialyzed blood that is at least about 10% greater than a solute clearance from the pre-dialyzed blood obtained in the absence of the engaged vibratory communication Various apparatus are also disclosed, each of which includes a vibration element in vibratory communication with the dialyzer.

A system for monitoring water chemistry of a recreational water installation includes a sensor configured to detect bather load in the recreational water installation and a controller configured to determine a required adjustment to the water chemistry of the recreational water installation based upon the detected bather load.

The separation of single-walled carbon nanotubes (SWNTs), by electronic type using centrifugation of compositions of SWNTs and surface active block copolymers in density gradient media.

The present invention is a method and material for using a sorbent material to capture and stabilize mercury. The method for using sorbent material to capture and stabilize mercury contains the following steps. First, the sorbent material is provided. The sorbent material, in one embodiment, is nano-particles. In a preferred embodiment, the nano-particles are unstabilized nano-Se. Next, the sorbent material is exposed to mercury in an environment. As a result, the sorbent material captures and stabilizes mercury from the environment. In the preferred embodiment, the environment is an indoor space in which a fluorescent has broken.

A patient wearable, continuously operating extracorporeal pump apparatus which accesses the patient's arterial venous pressure differential by applying external pressure to a subcutaneous graft that has been cannualized to modulate blood flow through an extracorporeal circuit and to drive the pump for delivering a medicament, such as an anticoagulant, to the site of an intravenous cannula to prevent clogging thereof and also to move a dialysate through a circuit, including a dialyzer and a dialysate rejuvenating cartridge, whereby kidney failure can be treated without recourse to prior art hemodialysis machines found in most treatment facilities. With slight modification, the present invention can be used to remove excess fluids from CHF patients, to remove toxins from the blood in those suffering from liver failure and to facilitate administration of insulin to diabetics and/or glucose to those having hypoglycemia.

The present invention describes a method of optimizing CO2 concentration to increase the specific growth rate of Anammox bacteria and methanogens in wastewater and sludge treatment, as well as novel systems and methods of treating wastewater and sludge. The specific growth rate or doubling time of the Anammox bacteria and methanogens were determined to be sensitive to dissolved CO2 concentration. Optimizing dissolved CO2 concentration increases the specific growth rate of the Anammox bacteria, which may be used as an alternative biological nitrogen removal process for the treatment of domestic wastewater. In the method and system of treating sludge, the CO2 stripper returns biogas with low CO2 concentration to the headspace of an anaerobic digester in order to lower the headspace CO2 concentration and therefore, the soluble CO2 concentration. The lower soluble CO2 concentration increases the specific growth rate of the methanogens for a more efficient anaerobic digestion process.

Separation processes using osmotically driven membrane systems are disclosed generally involving the extraction of solvent from a first solution to concentrate solute by using a second concentrated solution to draw the solvent from the first solution across a semi-permeable membrane. Enhanced efficiency may result from using low grade waste heat from industrial or commercial sources. Pre-treatment and post-treatment may also enhance the osmotically driven membrane processes.

A water treatment system is disclosed having electrolytic cell for liberating hydrogen from a base solution. The base solution may be a solution of brine for generating sodium hypochlorite, or potable water to be oxidized. The cell has first and second opposing electrode endplates held apart from each other by a pair of supports such that the supports enclose opposing sides of the endplates to form a cell chamber. One or more inner electrode plates are spaced apart from each other in the cell chamber in between the first and second electrode plates. The supports are configured to electrically isolate the first and second electrode plates and the inner electrode plates from each other. The first and second electrode plates are configured to receive opposite polarity charges that passively charge the inner electrode plates via conduction from the base solution to form a chemical reaction in the base solution as the base solution passes through the cell chamber.

Systems for treating biomass for the production of ethanol are disclosed. The systems are configured to treat a liquid component separated from biomass to yield sugars available to be fermented into a fermentation product. The systems comprise a filter configured to remove particulate matter to provide a filtered component and an apparatus configured to remove inhibitors from the filtered liquid component provide a treated liquid component comprising sugars available for fermentation. Methods for treating for treating biomass useful in the production of a fermentation product are also disclosed. The methods include the steps of filtering a liquid component to remove particulate matter thereby yielding a filtered liquid component, and treating the filtered liquid component to remove inhibitors thereby yielding a treated liquid component comprising sugars available to be fermented into a fermentation product.

A dispensing system includes a detection device and a dispenser configured to dispense at least one of ice and a liquid. The detection device is configured to detect a container positioned with respect to the dispenser and generate a first signal representative of the container position. The dispensing system also includes a controller coupled to the detection device and the dispenser. The controller is configured to determine a stability of the container and activate the dispenser to dispense at least one of an amount of the ice and an amount of the liquid into the container based on the first signal and the determined stability of the container.

One embodiment of the present invention relates to a method for inflating a chamber within an inflatable avalanche safety system. The method includes providing an inflatable avalanche safety system including an inflatable chamber; receiving a user-triggered action intended to activate the avalanche safety system; transmitting ambient air from an external region to within the inflatable chamber; and inflating the inflatable chamber entirely with the transmitted external ambient air to a particular internal pressure and shape configured to protect the user from burial during an avalanche. The transmission of ambient air within the inflatable chamber may be accomplished with a fan or an electrical component.

A filling system for a detergent vessel comprises a reservoir (2) having a dispensing nozzle (3) and a detergent vessel (16) having a filling spout (15). The nozzle has a collar with engagement means which when inserted into the filling spout engage a portion of the filling spout providing an effective seal.

The invention relates to a filling system for filling bottles or similar containers (2) with a liquid filling material, said system comprising at least one filling element, a liquid channel formed in a housing of the filling element and connected to a tank for providing the liquid filling material, and at least one outlet for dispensing the liquid filling material into the respective container attached to the filling element. Said filling system also comprises a liquid valve in the liquid channel, a gas return tube that projects past the at least one outlet on one end, for controlling the level of the filling material in the filled container, and is connected to a gas chamber, formed for example in the tank, by means of a fluid connection. The filling system also comprises an open fluid channel inside the filling element, in the region of the outlet. Said channel can be connected to a ring channel guiding a gaseous and/or vaporous fluid under pressure, preferably an inert gas under pressure, and controlled by at least one first control valve.

A system for filling a jar with powdery material, for example for the manufacture of nuclear fuel, including a device for connection between the jar and a material feed system, where the device includes: a stationary connection portion connected to the feed system,a connection portion which moves relative to the stationary connection portion intended to be connected to the container's filling orifice, where the moving connection portion includes in the area of a downstream end a lip seal to achieve a tight connection by contact with the contours of the jar's filling orifice and where the said downstream end is connected to the stationary connection portion by a bellows so as to provide mechanical disengagement between the downstream end of the moving connection portion and the stationary connection portion.

White-pigmented and unpigmented base paints and stains are custom-tinted using an automated colorant dispenser having a minimum fluid dispensing quantity less than 0.01 fluid ounce (

A material-channeling tray comprising a tray surface, an opposing bottom surface, and a sidewall extending from the tray surface and bottom surface. The tray surface has a plurality of channel openings and a handle opening extending through the tray surface and the bottom surface. The sidewall has an exterior surface and an interior surface, with the interior surface and tray surface defining a tray volume. The sidewall extends away from the tray surface forming an angle between the interior surface and the tray surface that is at least ninety degrees. The invention further comprises a plurality of channel walls, each forming a channel, wherein the plurality of channel walls are attached to and extend from the bottom surface, and each of the channels is positioned subjacent to one of the channel openings.

A gas filling system (1) includes a gas tank (30); a gas filling device (2) that fills gas into the gas tank (30); and a controller (24) that calculates a temperature increase ΔT and a pressure increase ΔP in the gas tank (30) during a predetermined period of time (t seconds) that elapses from a start of gas filling. The controller (24) selects a filling rate map (Ma, Mb) from a prepared filling rate map group on the basis of the calculated temperature increase ΔT and the calculated pressure increase ΔP. The gas filling device (2) carries out gas filling using the filling rate map selected by the controller (24).

A device, system and/or method for dispensing a fuel additive to a fuel tank that employs a fuel additive delivery device secured to an opening of the fuel tank. The delivery device is fluidly coupled to a fuel additive reservoir. The delivery device includes a cap that automatically opens or closes fluid communication with the fuel additive reservoir. The delivery device also includes a bore defined through the delivery device configured to receive a fuel filler spout with a fuel passageway outlet positioned in the bore such that, as fuel passes through the bore and into the fuel tank, the bore is configured to create a suction at the fuel additive outlet to pull fuel additive from the reservoir, through the delivery device, and into the fuel tank with the fuel.

An apparatus for safety-compliant emptying and filling of a reagent container (24, 40) for a tissue processor (20) comprises a suction line (30, 42) for aspirating a reagent out of the reagent container (24, 40) and a delivery line (32, 44) for filling the reagent container (24, 40) with the reagent, a terminating opening (31, 43) of the suction line (30, 42) being spaced away from a terminating opening (33, 45) of the delivery line (32, 44).

A container and method are provided for storing fat containing liquid products. The container includes a body defining a storage chamber for receiving the product, and a container closure. A first material portion forms at least most of the surface area overlying the storage chamber that can contact any product therein. Neither the body nor the first material portion leach more than a predetermined amount of leachables into the product or undesirably alter a taste profile thereof. A needle penetrable and thermally resealable second material portion either (i) overlies the first material portion and cannot contact any product within the storage chamber, or (ii) forms a substantially lesser surface area overlying the storage chamber that can contact any product therein in comparison to the first material portion. A sealing portion is engageable with the body to form a substantially dry hermetic seal between the container closure and body.

A communication device or auxiliary ECU is activated when a fuel door of a fuel cell vehicle is open. Upon closing the fuel door, the communication device/ECU is shut off. The communication device/auxiliary ECU is operational regardless of whether the keys in the vehicle or not. This assures that communication of information can occur when a refueling station is most likely to request the information, i.e. when the fuel door is open. A temperature measurement device may monitor a vehicle tank temperature, communicate the tank temperature data to a filling station, and confirm that the tank temperature data is associated with the tank being filled.

A funnel has a cylindrical upper first section with a first axial height and a first diameter, a cylindrical lower second section with a second axial height and a second diameter, and a frusto-conical intermediate section coupling the upper and lower sections and having a third axial height. Each of a plurality of similarly configured housings has a hollow cylindrical configuration forming cylindrical chambers, a housing axial height, a housing diameter, an upper end coupled to the intermediate section closer to the second section than to the first section, and a housing lower end at an elevation beneath the intermediate section laterally spaced from an upper extent of the second section. Each housing is adapted to removably receive and frictionally retain a magnet.

A semi-automated system suitable for use in a hospital setting for filling patient-specific liquid prescriptions to be administered by oral syringes on a just-in-time basis. The system enables hospital pharmacists to simplify and streamline their task, increasing the number of prescriptions that can be filled in a day, improving patient safety and care by minimizing medication errors and the consequences that ensue.

A processing system according to embodiments has an article supplier which supplies an article; a first conveyor which conveys an object to be processed; a workbench which is provided on the downstream side of the first conveyor and places thereon the object to be processed, conveyed by the first conveyor; a robot which takes out the article from the article supplier and subjects the object to be processed, placed on the workbench, to an operation using the article according to a previously instructed operation movement; and a second conveyor which is provided on the downstream side of the workbench and conveys the object to be processed, which has been subjected to the operation by the robot.

A pressure-stable cylinder/piston unit which blocks water vapor and oxygen and is designed for a needle-free injector, with a chamber arranged in a cylinder, which blocks water vapor and oxygen, and designed for long-term and sterile storage of an injection solution, an end wall with at least one nozzle bore or one outlet element, a pressure-stable outer cylinder, and a pressure-stable piston arranged movably in the chamber and blocking water vapor and oxygen. Methods for bubble-free, automatic or manual filling of the cylinder/piston unit, also at atmospheric pressure are also disclosed.

A conveying device for free-flowing fine-particle solids, in particular for powdery and/or granular (mixed) material, especially plastic granulate, includes a vertically arranged and flexibly mountable telescopic pipe for the conveyance of, preferably, polymer granulates, for example in a plant for the filling of polymer granulates.

A reductant fill system is provided. A reductant tank is configured to store a reductant. A receiver is configured to receive a supply of the reductant from an off-board reservoir. A first valve is in communication with the reductant tank and is configured to control a reductant flow into the reductant tank. A reductant supply line is in fluid communication with the receiver. The reductant supply line is configured to provide the reductant flow to the first valve. The reductant level sensor is configured to generate a signal based on a level of reductant in the reductant tank. A controller is communicably coupled to the reductant level sensor. The controller is configured to purge a stranded reductant in the reductant supply line, based on the signal generated by the reductant level sensor.

A DC-DC converter includes a first amplifier that amplifies a first difference between a first reference voltage and a feedback voltage corresponding to an output voltage, a second amplifier that amplifies a second difference between the first reference voltage and an integrated value of the feedback voltage, and a controller that controls a switching circuit to change the output voltage when the first difference reaches the second different.

A power supply for a load control device generates a DC voltage and provides an asymmetrical output current, while drawing a substantially symmetrical input current. The power supply comprises a controllably conductive switching circuit for controllably charging an energy storage capacitor across which the DC voltage is produced. The energy storage capacitor begins charging at the beginning of a half-cycle and stops charging after a charging time in response to the magnitude of the DC voltage and the amount of time that the energy storage capacitor has been charging during the present half-cycle. The charging time is maintained substantially constant from one half-cycle to the next. The power supply is particularly beneficial for preventing asymmetrical current from flowing in a multiple location load control system having a master load control device supplying power to a plurality of remote load control devices all located on either the line-side or the load-side of the system.

Efficiency of a switch mode power supply (SMPS) is optimized by operating the SMPS in an asynchronous mode when current being supplied therefrom is less than a certain current value and operating the SMPS in a synchronous mode when the current being supplied therefrom is equal to or greater than the certain current value. When the SMPS is operating in the synchronous mode high-side and low-side power transistors alternately turn on and off. When the SMPS is operating in the asynchronous mode only the high-side power transistor turns on and off and the low-side power transistor remains off. When charging a battery with the SMPS discharge of the battery is eliminated when operating in the asynchronous mode at a low current output.

A power conversion system has a power converter configured to receive an input voltage signal, convert the input voltage to an output voltage signal, and provide the output voltage signal to a load and a closed loop compensator configured to receive the output voltage signal and a reference voltage signal, the closed loop compensator configured to transmit an error signal indicative of a difference between the output voltage signal and the reference voltage signal. The power conversion system further has a pulse with modulator configured to receive the error signal and modulate a control signal with the error signal to control the output voltage signal, the pulse width modulator configured to transmit the control signal to the power converter and logic configured to receive the error signal and control the closed loop compensator based upon the error signal. A controller observes the error signal characterstics such as peak-to-peak values, frequency and phase and adjust the closed loop controller variables and other power converter system variables in order to improve the dynamic performance and improve stability.

In some aspects of the invention, overcurrent protection is carried out by suppressing fluctuations in current flowing through a switching element after overcurrent detection. A peak current reaching time detection circuit detects a peak current reaching time needed until current flowing through a switching element reaches a peak value. A difference voltage detection circuit, including a ½ time detection circuit which detects a time of ½ an ON time of the preceding cycle of the switching element, detects difference voltage between reference voltage used when detecting overcurrent flowing to a load and a signal which has detected current flowing through the switching element for the ½ time. A delay time adjustment circuit, based on at least one of the peak current reaching time and difference voltage, carries out adjustment and control of a delay time occurring until the time when the switching element is turned off after detecting the overcurrent.

Methods and systems are described for providing power factor correction for high-power loads using two interleaved power factor correction stages. Each power factor correction stage includes a controllable switch that is operated to control the phasing of each power factor correction stage. The phasing of output current from the second power factor correction stage is shifted 180 degree relative to the output current from the first power factor correction stage.

In accordance with one embodiment of the present disclosure, a multi-phase voltage regulator may comprise a plurality of phases, each phase configured to supply electrical current to one or more information handling resources electrically coupled to the voltage regulator. A controller may be electrically coupled to the plurality of phases. The controller may designate at least one of the plurality of phases as a first state phase, and designate each of the plurality of phases not designated as a first state phase as a second state phase. The controller may alternate the designation of at least two of the plurality of phases between a first state phase and a second state phase. Each first state phase may be configured to supply a first electrical current regardless of electrical current demand. Each second state phase may be configured to supply a second electrical current based on the current demand.

The invention relates to a system for eliminating current surges that includes a first voltage regulator (7) having a current limit programmable to a value (I(limit)) that depends on the value of the intermittent current surges (IO(surge)) required by the intermittent load (3) and the relationship thereof to the work cycle, a second voltage regulator (9), a condenser (4) connected between the first and second regulators (7, 9), that loads when the current is no longer required and that unloads when there is a need for output current to provide current to the second regulator (9) which absorbs the changes in voltage produced by the loading/unloading of the condenser and provides a constant voltage for any value of the required output current surge, independently of voltage changes in the condenser (4), and a control loop between a sensor for the output current provided to the load and an input limit (15) for the input current (II) in the first regulator (7). Thus, the input current (I(limit)) (1) and the output voltage (VLoad) are constant for any value of the output current surge (IO(surge)).

A device (200) includes a circuit (202) and a driver stage (204) therefor. The circuit includes two sub-circuits (231 and 232). The driver stage includes switcher logic (206) that produces signals that control switching on and off of the sub-circuits. The switcher logic also produces other signals in advance of the signals that control the switching of the sub-circuits. The driver stage includes delay compensations circuits (221 and 222), coupled to the switcher logic and to the circuit, that produce timing signals for the switcher logic. The timing signals are closely aligned with moments that a changing voltage at a node between the sub-circuits passes through threshold voltages. The timing signals compensate for all delays of signals through the device such that a period that both sub-circuits are off is minimized, while ensuring that both sub-circuits are not on at a same time.

A power supply device includes a first converter which converts an input voltage to a first voltage, a second converter which converts the first voltage from the first converter to a second voltage, a voltage comparison section which compares the first voltage outputted from the first converter with a predetermined reference voltage, a voltage comparison result output section which outputs a first signal until the first voltage is determined to be higher than the predetermined reference voltage by the voltage comparison section and retains a second signal as an output after the first voltage is determined to be higher than the predetermined reference voltage, and a converter control section which controls the second converter to stop when the first signal is outputted from the voltage comparison result output section and controls the second converter to operate when the second signal is outputted from the voltage comparison result output section.

A synchronous DC-DC converter having a soft-stop function includes an output stage for supplying an output voltage, wherein the output stage includes a high-side transistor for charging the output voltage and a low-side transistor for discharging the output voltage; an output control circuit, coupled to the output stage, for controlling the high-side transistor and the low-side transistor of the output stage; at least one protection device, for controlling the high-side transistor to be turned off when a specific situation occurs, in order to stop supplying the output voltage; and a soft-stop control circuit, coupled to the output control circuit, for controlling the low-side transistor of the output stage to be turned on when the protection device controls the high-side transistor to be turned off or the synchronous DC-DC converter is disabled, in order to discharge the output voltage.

Systems and methods that provide control circuits having multiple sub-control inputs that control operation of a power electronics device (e.g., a power converter). Each of the multiple sub-control inputs are output from a separate sub-control circuit that includes a feedback circuit having an input tied to a common control node. The common control node is coupled to an input of a controller (e.g., a PWM controller). Outputs of each of the sub-control circuits are coupled to the common control node by a respective switch (e.g., diode, transistor, etc.) so that each of the sub-control circuits may be selectively coupled to the common control node to provide a control signal to a controller. Since components of each of the feedback compensations circuits are biased at a regulation voltage instead of a higher power supply voltage, the control circuit may switch between control modes with minimal delay.

A power-supply circuit for a DC appliance includes an input unit including a first terminal and a second terminal so as to receive a DC current, an output unit including a third terminal to output the DC current entered by the input unit and a fourth terminal, a connection unit including a first conductive line and a second conductive line so as to interconnect the input unit and the output unit, a rectifier unit including first to fourth diodes coupled as a bridge diode format so as to rectify the input DC current in a predetermined direction, an inductor unit that is connected in series to the rectifier unit in such a manner that the input DC current is gradually increased from an abrupt change time point of the DC current, and a condenser unit that is connected in series to the inductor unit.

In accordance with an embodiment, a circuit includes a first transistor, a second transistor having a reference node coupled to an output node of the first transistor, and a control circuit. The control circuit is configured to couple a second reference node to a control terminal of the second transistor during a first mode of operation, couple a floating reference voltage between the control terminal of the second transistor and the reference terminal of the second transistor during a second mode of operation and during a third mode of operation, and couple a third reference node to the reference terminal of the second transistor during the third mode of operation. The second reference node is configured to have a voltage potential operable to turn-on the second transistor, and the floating reference voltage is operable to turn on the second transistor.

Polyphase converter, comprising a plurality of electrical phases (11 to 16), which can each be driven by switching means (21 to 26), wherein at least one coupling means (31 to 39) is provided, which magnetically couples at least one first phase (11) to at least one further phase (12, 14, 16), wherein at least two phases (11, 12) to be coupled are surrounded at least partially by the coupling means (31), wherein at least one insulating body (72) is provided, which on the upper or lower side thereof accommodates the phases (11 to 16) to be coupled and on which at least one fastening means (74, 76, 90) is provided, which interacts with at least one of the phases (11 to 16) for fastening purposes.

An integrated power quality control system includes a transformer with a primary winding, a secondary winding and a compensation winding wound on a magnetic core. A power electronic converter in the system provides a reference voltage to the compensation winding for injecting a series voltage in the secondary winding of the transformer. A controller is utilized to generate a reference control voltage for the power electronic converter based on a power quality control requirement.

A bridge-less step-up switching power supply device includes (i) a first and a second reactor having: a first and a second main winding connected to a first and a second input terminal, respectively; and a first and a second auxiliary winding magnetically coupled to the first main winding and connected to the first and second main windings, the first and second auxiliary windings having a first and a second leakage inductance, respectively; (ii) a first and a second diode connected between the first and second auxiliary windings and a first output terminal, respectively; (iii) a first capacitor connected between the first output terminal and a second output terminal; (iv) a second capacitor connected between a connection point of a third switch and a fourth switch, and the first output terminal; and (v) a controller for controlling turning on/off of first to fourth switches.

A system that manages a supplemental energy source connected to a power grid uses a two stage control strategy to manage power transfers in and out of the power grid as well as in and out of an energy storage system, such as a battery bank. One stage uses a non-linear transfer function to control an output frequency of a DC-to-AC inverter to limit undesired effects of power transients that occur on the grid. A second stage uses control strategy for transferring energy between the energy storage system and an internal DC link based on a relationship between a voltage on a DC link connecting the first and second stages and a DC link reference voltage, the voltage on the DC link, and a voltage at the energy storage system. The control strategy includes rapid charging, over-charging protection, and grid transient stabilization.

A switched mode power supply provides a reduction of switching losses and increased efficiency. The switched mode power supply includes a first switch coupled to an input terminal configured to receive an input voltage, a second switch, an inductor and an output capacitor. The first switch and the second switch are coupled together at a node, the inductor is coupled between the node and an output terminal, and the output capacitor is coupled to the output terminal. The switched mode power supply further includes a transformer coupled between a control input of the first switch and the node and a pulse generator connected to a control input of the second switch. Further, the transformer includes at most two windings, in particular a primary winding and a secondary winding which are not directly connected to each other.