Some Eastern Iowans are ready to go camping.

With Gov. Kim Reynolds allowing campgrounds across the state to open Friday, some people wasted little time in heading outdoors.

“They’re already starting to fill up,” said Ryan Schlader of Linn County Conservation. “By about 7 this morning, we had a dozen at Squaw Creek Park. People were coming in bright and early to camp. We’re not surprised.”

Schlader said Linn County Conservation tried to have the campgrounds open at the county’s Squaw Creek, Morgan Creek and Pinicon Ridge parks at 5 a.m. Friday. He expected all of them would be busy.

“I think people were ready to go,” he said.

Lake Macbride State Park in Johnson County didn’t see quite as much of a rush for campsites, park manager Ron Puettmann reported Friday morning, saying he’d had six walk-ins for the park’s 42 campsites.

Camping this weekend will be done on a first-come, first-served basis. Sites won’t be available for reservations until next week, though online reservations can be made now, Puettmann said.

“I’m quite sure people were waiting anxiously to get on,” he said.

While Reynolds’ campground announcement came Wednesday, Schlader and Puettmann said they had no issues having the campgrounds ready for Friday.

Schlader said county staff have been in touch with the Iowa Department of Natural Resources and other county conservation boards to discuss protocols for reopening to ensure a safe experience for campers and employers.

“We anticipated at some point the order would be lifted,” Schlader said. “We were anticipating maybe May 15. The campgrounds were in good shape and ready to go.”

For now, camping comes with some limitations:

• Campers can camp only in a self-contained unit with a functioning restroom, such as a recreational vehicle.

• Shower houses with restrooms will remain closed for the time being.

• Campsites are limited to six people unless they are from the same household.

• No visitors are allowed at the campsites.

Puettmann said staffers and a DNR officer will be on hand to make sure guidelines are followed, but he didn’t anticipate enforcement would be an issue.

“For the most part, we’re going to allow people to police themselves,” he said.

It’s hard to gauge demand, Schlader said.

The weather isn’t yet deal for camping, and some people might not be ready to camp, given the continuing coronavirus.

“There is a lot of uncertainty,” he said. “Do people feel like they need to get out and enjoy a camping experience within their own campsite, or do people still feel under the weather and think it’s not a good idea for my family to go right now? ... We just want this to be an option for people.”

Comments: (319) 339-3155; lee.hermiston@thegazette.com

DES MOINES — More than 20 days after Iowa signed a $26 million contract with a Utah company to expand testing in the state, the machines the firm supplied to run the samples still have not passed muster.

A time frame for completing the validation process for the Test Iowa lab machines is unknown, as the process can vary by machine, University of Iowa officials said Friday.

The validation process is undertaken to determine if the machines are processing tests accurately. To this point, the lab has processed the Test Iowa results using machines the State Hygienic Lab already had, officials told The Gazette.

Running side-by-side testing is part of the validation process. The lab then compares whether the machines yield the same results when the sample is run, officials said Friday. The side-by-side testing means the Test Iowa samples are being run at least twice to compare results.

The state does not break out how many of the 331,186 Iowans who by Friday have completed the coronavirus assessment at TestIowa.com have actually been tested. Test Iowa was initiated last month to ramp up testing of essential workers and Iowans showing COVID-19 symptoms. The state’s fourth drive-though location where people with appointments can be tested opened Thursday at the Kirkwood Continuing Education Training Center in Cedar Rapids.

On Friday, Iowa posted a fourth straight day of double-digit deaths from coronavirus, with the latest 12 deaths reported by the state Department of Public Health bringing the statewide toll to 243 since COVID-19 was first confirmed March 8 in Iowa.

State health officials reported another 398 Iowans tested positive for the respiratory ailment, bringing that count to 11,457 of the 70,261 residents who have been tested — a positive rate of more than 16 percent.

One in 44 Iowans has been tested for COVID-19, with 58,804 posting negative results, according to state data. A total of 4,685 people have recovered from the disease.

During a Thursday media briefing, Gov. Kim Reynolds told reporters a backlog of test results that occurred due to validation of Test Iowa equipment had been “caught up,” but some Iowans who participated in drive-through sites set up around the state indicated they still were awaiting results.

Reynolds spokesman Pat Garrett confirmed Thursday that “a very small percentage” of coronavirus test samples collected under the Test Iowa program could not be processed because they were “potentially damaged,” resulting in incomplete results.

There were 407 Iowans who were hospitalized (with 34 admitted in the past 24 hours) for coronavirus-related illnesses and symptoms with 164 being treated in intensive care units and 109 requiring ventilators to assist their breathing.

Health officials said the 12 deaths reported Friday were: three in Woodbury County, two in Linn County and one each in Black Hawk, Dallas, Dubuque, Jasper, Louisa, Muscatine and Scott counties. No other information about the COVID-19 victims was available from state data.

According to officials, 51 percent of the Iowans who have died from coronavirus have been male — the same percentage that tested positive.

Iowans over the age of 80 represent 46 percent of the COVID-19 victims, followed by 41 percent between 61 and 80.

Of those who have tested positive, state data indicates about 42 percent are age 18 to 40; 37 percent are 41 to 60; 14 percent are 61 to 80 and 5 percent are 81 or older.

Counties with the highest number of positive test results are Polk (2,150), Woodbury (1,532), Black Hawk (1,463) and Linn (813).

Earlier this week, state officials revamped the data available to the public at coronavirus.iowa.gov, with the new format no longer listing the age range of Iowans who died from coronavirus and providing information using a different timeline than before.

The governor did not hold a daily media briefing Friday due to scheduling conflicts created by Vice President Mike Pence’s trip to Iowa. Garrett said Reynolds would resume her COVID-19 briefings next week.

John McGlothlen and Zack Kucharski of The Gazette contributed to this report.

A man suspected of a workplace shooting last month at a vinyl window manufacturer in southwest Cedar Rapids turned himself into authorities Friday.

Jamal Devonte Edwards, 26, has been wanted since two men were shot at Associated Materials, 3801 Beverly Rd. SW, the morning of April 9.

Cedar Rapids police had indicated Edwards was wanted in particular for the shooting of Mark Robertson, 36.

Edwards faces charges of attempted murder, intimidation with a dangerous weapon, going armed with intent and willful injury.

The U.S. Marshals Service helped locate Edwards, distributing a photo of Edwards along the Gulf Coast. He was located in Mobile, Ala. when his father brought him to the Mobile police department so he could turn himself in, according to a Cedar Rapids police news release.

The April 9 shooting was reported at 5:03 a.m. after two employees were shot at Associated Materials. Both suffered non-life-threatening injuries, police said.

Police said at the time it appeared the shooter knew the two men.

Shawn Hardy, senior vice president of integrated products for Associated Materials, confirmed Edwards worked at the Cedar Rapids business, which gave him access to the building, but said he had been employed through a temp agency.

Iowa State University graduates who celebrated commencement Friday saw lots of caps and gowns, red-and-gold confetti and arenas packed with friends and family.

But none of those images were from this year — which now is defined by the novel coronavirus that has forced education online and put an end to large gatherings like graduation ceremonies.

Appearing in front of a red ISU screen Friday, College of Agriculture and Life Sciences Dean Daniel J. Robison addressed graduates like he usually would at commencement — but this time in a recorded message acknowledging the unprecedented circumstances keeping them apart.

“This year, because of the COVID crisis, we are unfortunately not all together for this happy occasion,” he said, pushing forward in a motivational tone by quoting famed ISU alumnus George Washington Carver.

“When you can do the common things in life in an uncommon way, you will command the attention of the world,” Robison said, citing Carver.

About 12,000 graduates across Iowa’s public universities this month are doing exactly that — capping their collegiate careers with never-before-attempted online-only commencement ceremonies, with each campus and their respective colleges attempting a variety of virtual celebration methods.

ISU and the University of Iowa are attempting some form of socially-distanced livestreamed convocation with countdown clocks and virtual confetti. All three campuses including the University of Northern Iowa have posted online recorded messages, videos and slides acknowledging individual graduates.

Some slides include photos, thank-yous, quotes and student plans for after graduation.

UNI, which didn’t try any form of a live virtual ceremony, instead created a graduation website that went live Thursday. That site hosts an array of recorded video messages — including one from UNI President Mark Nook who, standing alone behind a podium on campus clad in traditional academic regalia, recognized his campus’ 1,500-some spring graduates and their unusual challenges.

“We know the loss you feel in not being able to be on campus to celebrate this time with your friends, faculty and staff,” Nook said. “To walk around campus in your robe and to take those pictures with friends and family members … The loss is felt by many of us as well.”

He reminded those listening that this spring’s UNI graduates — like those at the UI and ISU — can participate in an upcoming in-person commencement ceremony.

And although students were allowed to return caps and gowns they ordered for their canceled walks across the stage, some kept them as keepsakes. The campuses offered other tokens of remembrance as well, including “CYlebration” gift packages ISU sent to graduates in April stuffed with a souvenir tassel, diploma cover, and streamer tube — to make up for the confetti that won’t be falling on graduation caps from the Hilton Coliseum rafters.

In addition to the recorded messages from 17 UI leaders — including President Bruce Harreld — the campus solicited parent messages, which will be included in the live virtual ceremonies.

To date, about 3,100 of the more than 5,400 UI graduates have RSVP’d to participate in the ceremony, which spokeswoman Anne Bassett said is a required affirmation from the students to have their names read.

“Students do not have to sign up to watch,” she said. “So there’s no way at this time to predict how many will do so.”

Despite the historic nature of the first online-only commencement ceremonies — forever bonding distanced graduates through the shared experience — UI graduate Omar Khodor, 22, said it’s a club he would have liked to avoid.

“I’d definitely prefer not to be part of that group,” the environmental science major said, sharing disappointment over the education, experiences and celebrations he lost to the pandemic.

“A lot of students like myself, we’re upset, but we’re not really allowed to be upset given the circumstances,” Khodor said. “You have this sense that something is unfair, that something has been taken from you. But you can’t be mad about it at all.”

‘Should I Dance Across the Stage?’

Life is too short to dwell on what could have been or what should have been — which sort of captures graduate Dawn Hales’ motivation to get an ISU degree.

The 63-year-old Ames grandmother calls herself the “oldest BSN Iowa State grad ever.”

“It’s the truth, because we’re only the second cohort to graduate,” Hales said. “I’ll probably be the oldest for a while.”

ISU began offering a Bachelor of Science in nursing degree in fall 2018 for registered nurses hoping to advance their careers — like Hales, who spent years in nursing before becoming director of nursing at Accura Healthcare, a skilled nursing and rehabilitation center in Ames.

In addition to wanting more education, Hales said, she felt like the “odd man out” in her red-and-gold family — with her husband, three sons and their wives all earning ISU degrees. She earned an associate degree and became a registered nurse with community college training.

“I was director of nursing at different facilities, but I did not have a four-year degree,” she said. “I always wanted to get my BSN.”

So in January 2019, she started full-time toward her three-semester pursuit of a BSN — even as she continued working. And her education took a relevant and important turn when COVID-19 arrived.

“My capstone project was infection control,” she said, noting her focus later sharpened to “infection control and crisis management” — perfect timing to fight the coronavirus, which has hit long-term care facilities particularly hard.

“We were hyper vigilant,” Hales said of her facility, which has yet to report a case of COVID-19. “I think we were probably one of the first facilities that pretty much shut down and started assessing our staff when they would come in.”

Hales said she was eager to walk in her first university graduation and was planning antics for it with her 10-year-old granddaughter.

“We were trying to think, should I dance across the stage?” Hales said. “Or would I grab a walker and act like an old lady going across the stage?

“She was trying to teach me to do this ‘dab’ move,” Hales said. “I said, ‘Honey, I cannot figure that out.’”

In the end, Hales watched the celebration online instead. She did, however, get a personalized license plate that reads, “RN2BSN.”

In From Idaho To Exalt ‘In ‘Our Own Way’

Coming from a family-run dairy farm in Jerome, Idaho, EllieMae Millenkamp, 22, is the first in her family to graduate college.

Although music is her passion, Millenkamp long expected to study at an agriculture school — but Colorado State was her original choice.

Then, while visiting family in Iowa during a cousin’s visit to ISU, she fell in love with the Ames campus and recalibrated her academic path.

While at ISU, the musical Millenkamp began writing more songs and performing more online, which led to in-person shows and a local band.

And then, during her junior year, a talent scout reached out to invite her to participate in an audition for NBC’s “The Voice.” That went well and Millenkamp, in the summer before her senior year, moved to Los Angeles and made it onto the show.

She achieved second-round status before being bumped, but the experience offered her lifelong friendships and connections and invigorated her musical pursuits — which have been slowed by COVID-19. Shows have been canceled in now idled bars.

Millenkamp went back to Idaho to be with her family, like thousands of her peers also did with their families, when the ISU campus shut down.

After graduation she plans on returning and working the family farm again until her musical career has the chance to regain momentum.

But she recently returned to Ames for finals. And she and some friends, also in town, plan to celebrate graduation, even if not with an official cap and gown.

“We’ll probably have a bonfire and all hang out,” she said. “We’ll celebrate in our own way.”

Seeking Closure After Abrupt Campus Exits

Most college seniors nearing graduation get to spend their academic hours focusing on their major and interests, wrapping their four or sometimes five years with passion projects and capstone experiences.

That was Omar Khodor’s plan — with lab-based DNA sequencing on tap, along with a geology trip and policy proposal he planned to present to the Iowa Legislature. But all that got canceled — and even some requirements were waived since COVID-19 made them impossible.

“There were still a lot of a lot of things to wrap up,” he said. “A lot of things I was looking forward to.”

He’s ending the year with just three classes to finish and “absolutely” would have preferred to have a fuller plate.

But Khodor’s academic career isn’t over. He’s planning to attend law school in the fall at the University of Pennsylvania, where he’ll pursue environmental law. But this spring has diminished his enthusiasm, with the question lingering of whether in-person courses will return to campus soon.

If they don’t, he’s still leaning toward enrolling — in part — because of all the work that goes into applying and getting accepted, which he’s already done.

“But online classes are definitely less fulfilling, less motivating. You feel like you learn less,” he said. “So it will kind of be a tossup. There’ll be some trade-offs involved in what I would gain versus what I would be paying for such an expensive endeavor like law school.”

As for missing a traditional college commencement, Khodor said he will, even though he plans to participate in the virtual alternative.

“Before it got canceled, I didn’t think that I was looking forward to it as much as I actually was,” he said.

Not so much for the pomp and circumstance, but for the closure, which none of the seniors got this year. When the universities announced no one would return to campus this semester, students were away on spring break.

They had already experienced their last in-person class, their last after-class drink, their last cram session, their last study group, their last lecture, their last Iowa Memorial Union lunch — and they didn’t even know it.

“So many of us, we won’t have closure, and that can kind of be a difficult thing,” he said.

Comments: (319) 339-3158; vanessa.miller@thegazette.com

Online Celebrations

For a list of commencement times and virtual celebrations, visit:

The University of Iowa’s commencement site at https://commencement.uiowa.edu/

Iowa State University’s commencement site at https://virtual.graduation.iastate.edu/

University of Northern Iowa’s commencement site at https://vgrad.z19.web.core.windows.net/uni/index.html

A 10th wedding anniversary traditionally is celebrated with a gift of aluminum or tin.

For Sondy Daggett, her 10th year of marriage to Liz Hoskins was marked with a gift of Champagne and chocolate-covered strawberries shared through a window.

Employees at Bickford of Marion, the assisted living and memory care center where Hoskins is a resident, surprised the couple with the anniversary gift on May 1. Despite the current coronavirus-related mitigation practices, the staff had created a special moment for the couple, who have been partners for 24 years.

Daggett burst into tears as employees played their wedding song — Billy Joel’s “The Longest Time.”

“It just touched my soul,” Daggett said.

Across the state, moments like this are relegated through windows or over a phone call. As the novel coronavirus pandemic sweeps through the country, long-term care facilities have locked down in an effort to keep residents healthy, which means their families are no longer able to hug their loved ones, or sit with them in their rooms.

For many families, the feelings at such times this time are conflicted. Typical Mother’s Day celebrations have been placed on hold, and recent milestones have been missed by those living in long-term care facilities. Simple visits through windows feel distant.

“Those are the moments you remember and you miss,” said Daggett, recalling memories of visits to Bickford of Marion from Hoskins’s grandchildren and family gatherings during the holidays.

Hoskins, who has dementia, has been a resident at Bickford since August 2019.

“The pandemic has taken this away,” Daggett said.

But beyond this new dynamic with which family members are left to grapple, they also have the constant worry that their loved one could fall ill.

So far, Bickford of Marion has not seen any cases.

“Every time you read about another outbreak — whether it’s close to home or anywhere in the country — it brings home how fortunate we are so far,” said Matt Hoskins, Liz Hoskin’s son. “I can’t imagine the anxiety the residents and staff are having once it breaks through the wall.”

As of Friday, 29 long-term care facilities across the state, which includes skilled nursing facilities and senior living centers, among others — have reported outbreaks of COVID-19 among hundreds of their staff and residents.

As a result, for some Iowans, that fear has become a reality.

‘I have to trust’

Ruth Brackett’s son Jamie Degner, a 38-year-old resident at Harmony House Health Care Center in Waterloo, tested positive for COVID-19 this past week.

Degner, who has severe autism and intellectual disabilities, has been a resident there since he was 15 years old.

More than 60 residents and staff have tested positive for COVID-19 at Harmony House, an intermediate care facility. It’s one of two long-term care facilities in Black Hawk County reporting an outbreak, defined as three or more positive tests among residents.

Degner received his test results on Tuesday. He’s had lower-than-normal oxygen levels, but otherwise has recorded his usual vital signs and has not experienced symptoms.

Brackett said it is “unbelievably difficult to not be able to go be with him through this.”

As with many facilities across the state, Harmony House closed its doors to visitors in early March, when the first cases of COVID-19 began being reported across Iowa and the nation. Brackett said her son’s cognitive abilities make it impossible for him to understand that she is unable to visit because she might make him sick, so the staff instead tell Degner his mom is “at work.”

While she’s optimistic he’ll improve, Brackett worries whether Degner’s virus would take a turn for the worse.

“It’s tough because I have to trust” the staff, Brackett said. “There’s nothing I can do, so I can’t spend a lot of time dwelling on what I might do differently.”

The families that spoke to The Gazette believe the leadership at long-term care facilities are doing what they can to keep its residents safe and healthy.

At Bickford of Marion, officials have taken the unique step of promising public transparency of possible COVID-19 cases in its facility. On the website of every Bickford location is a feature recording the number of residents who have tested positive for COVID-19.

“Whether it’s COVID-19 or not, we want to be transparent with families about their loved ones’ care,” Bickford of Marion Executive Director Jacobi Feckers said. “I don’t know why other nursing homes haven’t taken that step because I haven’t spoken to other facilities, but I’m thankful that’s the route we’ve taken.”

It’s not just families who are placing their trust in management. Ron Moore is an independent living resident at Cottage Grove Place, one of the largest senior living centers in Cedar Rapids that has reported an outbreak of COVID-19 this past week.

According to the latest data from public health officials, five residents and staff there have tested positive.

The outbreak originated in the skilled nursing unit, and officials said they are working to ensure the virus doesn’t spread to the assisted-living and independent-living portions of the facility. They restricted movement between the facilities and conduct frequent temperature checks of staff.

So far, the general feeling among residents at Cottage Grove Place’s independent-living housing is that management has “done a good job” of controlling exposure.

“The feelings of the residents here are positive,” Moore said. “They appreciate what management has done to protect us.”

‘Any opportunity to celebrate’

Still, life looks much differently at Cottage Grove Place. Moore said his schedule typically is packed with weekly book clubs and coffees with friends. Now he and his wife take walks, or try to connect with friends over email.

“I’ve found (residents) are not depressed at this time,” he said. “But in the future, if this goes on for many months? My prediction is yes, depression will be a serious thing.”

Local senior living centers have come up with unique ways to allow visitors to see their loved ones. Gina Hausknecht, a 55-year-old Iowa City resident, was able to see her mother in person for the first time in weeks after her assisted-living home, Oaknoll Retirement Community in Iowa City, created a “drive up” visit option this past weekend.

While Hausknecht sat in the car, she was able to speak with her mother, 93-year-old Ellen Hausknecht, for an hour outside the facility. Before this, it had been emotionally difficult for Hausknecht not to see her mom weekly as she usually does

“It sunk in that I don’t know when I’m going to see my mom again, and that felt really terrible,” Hausknecht previously told The Gazette.

Hausknecht said she hopes to take this year’s Mother’s Day as an opportunity to do something special, particularly given the difficult past few weeks.

“Our family isn’t super-big on these kinds of holidays but we do like to acknowledge them, and this year it feels important to take hold of any opportunity to celebrate,” she said.

Other facilities, including Bickford of Marion, also have eased restrictions on sending food and gifts to residents in time for Mother’s Day. Matt Hoskins, Liz’s Hoskins’ son, said the family’s usual Mother’s Day plans are impossible this year, so they hope to send Liz’s Hoskins artwork from her grandchildren along with other gifts.

Brackett, who will be apart from her son Degner this year, said she hadn’t planned anything for the holiday. She looks forward to her first in-person visit with him after the pandemic, when she will bring his favorite meal from McDonald’s and a new deck of Phase 10 cards.

Despite the feelings of being separated, their wedding anniversary on May 1 likely is something Daggett will cherish, she said. With Daggett acting as Hoskins caregiver since her dementia diagnosis in 2016, their wedding anniversary has been something the couple hasn’t celebrated in a significant way in some time, she said.

But that worry still creeps in the back of her mind. Daggett said she’s trying to remain “as confident as anyone can at this point.”

“I learned a long time ago you can’t worry about what you can’t control,” Daggett said. “But does that mean I still wake up at 2 in the morning worried about it? Of course I do.”

Comments: (319) 398-8469; michaela.ramm@thegazette.com

11 a.m. Iowa sees 214 more positive tests for coronavirus

The Iowa Department of Public Health on Saturday reported nine more deaths from COVID-19, for a total of 252 since March 8.

An additional 214 people tested positive for the virus, bringing the state’s total to 11,671.

A total of 71,476 Iowans have been tested for COVID-19, the department reported.

With Saturday’s new figures from the Department of Public Health, these are the top 10 counties in terms of total cases:

• Polk — 2194

• Woodbury — 1554

• Black Hawk — 1477

• Linn — 819

• Marshall — 702

• Dallas — 660

• Johnson — 549

• Muscatine — 471

• Tama — 327

• Louisa — 282.

CEDAR RAPIDS — An injured pelican rescued at Cedar Lake on Wednesday will have a permanent home at one of the top zoos in the Midwest.

“We downloaded all of the paperwork (on Friday), and we want to get it transported (to Henry Doorly Zoo and Aquarium in Omaha) within a week,” said Tracy Belle, founder and director of Wildthunder Wildlife and Animal Rehabilitation and Sanctuary in Independence.

“It’s doing well — we’re going to get it outside today to decompress a little.”

Belle, who also serves as primary animal rehabilitator at Wildthunder, believes the pelican is young — the average life span is 20 to 25 years — and she is not sure of its gender.

It suffered broken carpal bones and, according to Belle, surgical repair is unlikely.

“The veterinarian told me that the injury appears to be five to six weeks old,” she said. “I can only speculate, but I think when it flew into the lake, it may have clipped a power line.”

Belle said the pelican will need one more veterinary exam before transport to Omaha. In the meantime, “its appetite is good,” she said. “It’s eating five to 10 pounds of fish per day.”

Henry Doorly is closed due to the COVID-19 pandemic. In a typical year, the complex attracts about 2 million visitors.

Comments: (319) 368-8857; jeff.linder@thegazette.com

CEDAR RAPIDS — Like other members of the United States House, the “new normal” for Rep. Dave Loebsack involves a lot of time on the phone and in video conferences.

Although the Senate returned to Washington this past week, the House may not return to the Capitol until mid-May. As representatives work from their districts, many face the same challenges as their constituents who are working from home via various phone and video meeting platforms.

“They’re clunky, difficult, frustrating at times,” the 2nd District Democrat said after a 90-minute Energy and Commerce Committee teleconference meeting, “but we can get a lot of things done that way without necessarily going into Washington. It’s not the same by any means ... but I think we can get a lot of our work done that we have to get done even though were not there.”

If there’s an upside to the telecommuting downside, it’s that the poor connections, dropped calls and sometimes spotty internet signals highlight an issue Loebsack has been working on — Congress and the country need better broadband connectivity. A member of the Communications and Technology subcommittee of the Energy and Commerce Committee, which has jurisdiction over telecommunications issues, Loebsack also serves as a co-chair of the Rural Broadband Caucus.

In one meeting, Loebsack said, a fellow committee member was unable to ask questions because the Wi-Fi signal at his home outside of a southwestern city was so poor.

“So I think we’re going to make some progress” convincing congressional colleagues of the need to connect all Americans to reliable and affordable broadband internet, Loebsack said.

“In times like these, when families are at home, millions of K-12 students do not have access to the high-speed internet needed to take classes and complete their assignments online,” he said in an announcement with House Majority Whip James Clyburn and others of a House Democratic plan to connect all Americans to high-speed internet.

When the transmission of COVID-19 slows, the need for high-speed internet connectivity will remain as well as the need for Congress to provide incentives for internet service providers to close the “broadband gap” by extending service to the las mile in rural areas and eliminate what he called “internet deserts” that exist in cities.

The plan calls for an investment of $80 billion over five years for internet infrastructure and another $5 billion over five years for low-interest financing of projects.

With more reliable connectivity, Congress could consider remote voting at times like this when members don’t want to gather in Washington. House Speaker Nancy Pelosi has been cool to the idea, but Loebsack thinks members are “more open” to voting remotely.

“But we have to make sure that it’s completely secure, that the system can’t get hacked, and that votes are recorded properly,” he said.

Remote voting may be a may be a generational issue, “but I think this is doable.”

“I’m not making that prediction, but I would not be shocked if we move in that direction, especially the longer this (isolation) goes on,” Loebsack said.

Comments: (319) 398-8375; james.lynch@thegazette.com

Announcement of the Members - Give Integration add-on that creates a nicer UI when the GiveWP and Members plugins are active.

Announcement of the Members - ACF Integration plugin, which creates custom capabilities for the Advanced Custom Fields plugin.

Introducing an add-on plugin for Members that integrates the Easy Digital Downloads plugin roles and capabilities.

An add-on plugin that integrates WooCommerce's roles and capabilities into the Members user role editor.

It has almost been two months. First, allow me to apologize for not providing any updates during this time. As … Continue reading Returning to Our Community Roots →

I first released the Members plugin in September 2009. I had not long moved back home to Alabama from Atlanta, … Continue reading The Members plugin has a new home →

I like the philosophy behind shooting with primes; that a photographer shouldn’t stand still but instead, continuously move closer, further, lower, or higher relative to his/her subject as a means of establishing a deeper connection. ????????
—
Save 50% on my custom Lightroom presets with HOLIDAY50. Link in profile. (at Toronto, Ontario)

Missing Berlin’s gorgeous buildings again. ???? (at Berlin, Germany)

And while we’re in the process of missing European architecture… ????
—
4 more days left to catch my Lightroom presets for 50% off! ⌛️ (at Copenhagen, Denmark)

Trying to straighten all the lines on this shot is a sure fire way to go blind. ???? (at London, United Kingdom)

I’ve gone subway hopping for photos in every city I’ve been to except the one I live in. ???? (at Toronto, Ontario)

This trip solidified my conviction to learning photography. A lot has happened since this shot was taken.
Can you pinpoint the moment you decided to pursue photography? (at Toronto, Ontario)

A lot to look forward to in 2017. How did 2016 treat you: ???? or ????? (at San Francisco, California)

Four days from now I’ll be boarding a one way flight to San Francisco to take on the next evolution of my role at @shopify. Leaving the city that I’ve called home my entire life and the people who have defined everything I am was one of the most uncomfortable decisions I’ve ever had to make. But this wouldn’t be the first time I’ve chased discomfort in my career.
.
I wrote about my ongoing pursuit for discomfort this morning in hopes of inspiring others to do the things that scare and challenge them this year. You can find the link in my profile.
.
Happy 2017! ????
.
????: @jonasll (at San Francisco, California)

Yesterday, Cameron Koczon shared a link to the dingbat font, Pictos, by the talented, Drew Wilson. Cameron predicted that dingbats will soon be everywhere. Symbol fonts, yes, I thought. Dingbats? No, thanks. Jason Santa Maria replied:

@FictiveCameron I hope not, dingbat fonts sort of spit in the face of accessibility and semantics at the moment. We need better options.

Jason rightly pointed out the accessibility and semantic problems with dingbats. By mapping icons to letters or numbers in the character map, they are represented on the page by that icon. That’s what Pictos does. For example, by typing an ‘a’ on your keyboard, and setting Pictos as the font-face for that letter, the Pictos anchor icon is displayed.

Other folks suggested SVG and JS might be better, and other more novel workarounds to hide content from assistive technology like screen readers. All interesting, but either not workable in my view, or just a bit awkward.

Falling down with CSS text-replacement

A CSS solution in an article from Pictos creator, Drew Wilson, relies on the fact that most of his icons are mapped to a character that forms part of the common name for that symbol. The article uses the delete icon as an example which is mapped to ‘d’. Using :before and :after pseudo-elements, Drew suggests you can kind-of wrangle the markup into something sort-of semantic. However, it starts to fall down fast. For example, a check mark (tick) is mapped to ‘3’. There’s nothing semantic about that. Clever replacement techniques just hide the evidence. It’s a hack. There’s nothing wrong with a hack here and there (as box model veterans well know) but the ends have to justify the means. The end of this story is not good as a VoiceOver test by Scott at Filament Group shows. In fairness to Drew Wilson, though, he goes on to say if in doubt, do it the old way, using his font to create a background image and deploy with a negative text-indent.

I agreed with Jason, and mentioned a half-formed idea:

@jasonsantamaria that’s exactly what I was thinking. Proper unicode mapping if possible, perhaps?

The conversation continued, and thanks to Jason, helped me refine the idea into this post.

Jon Hicks flagged a common problem for some Windows users where certain Unicode characters are displayed as ‘missing character’ glyphs depending on what character it is. I think most of the problems with dingbats or missing Unicode characters can be solved with web fonts and Unicode.

Rising with Unicode and web fonts

I’d love to be able to use custom icons via optimised web fonts. I want to do so accessibly and semantically, and have optimised font files. This is how it could be done:

1. Map the icons in the font to the existing Unicode code points for those symbols wherever possible.

   Unicode code points already exist for many common symbols. Fonts could be tiny, fast, stand-alone symbol fonts. Existing typefaces could also be extended to contain symbols that match the style of individual widths, variants, slopes, and weights. Imagine a set of Clarendon or Gotham symbols for a moment. Wouldn’t that be a joy to behold?

   There may be a possibility that private code points could be used if a code-point does not exist for a symbol we need. Type designers, iconographers, and foundries might agree a common set of extended symbols. Alternatively, they could be proposed for inclusion in Unicode.

2. Include the font with font-face.

   This assumes ubiquitous support (as any use of dingbats does) — we’re very nearly there. WOFF is coming to Safari and with a bit more campaigning we may even see WOFF on iPad soon.

3. In HTML, reference the Unicode code points in UTF-8 using numeric character references.

   Unicode characters have corresponding numerical references. Named entities may not be rendered by XML parsers. Sean Coates reminded me that in many Cocoa apps in OS X the character map is accessible via a simple CMD+ALT+t shortcut. Ralf Herrmann mentioned that unicode characters ‘…have “speaking” descriptions (like Leftwards Arrow) and fall back nicely to system fonts.’

Limitations

1. Accessibility: Limited Unicode / entity support in assistive devices.

   My friend and colleague, Jon Gibbins’s old tests in JAWS 7 show some of the inconsistencies. It seems some characters are read out, some ignored completely, and some read as a question mark. Not great, but perhaps Jon will post more about this in the future.

   Elizabeth Pyatt at Penn State university did some dingbat tests in screen readers. For real Unicode symbols, there are pronunciation files that increase the character repertoire of screen readers, like this file for phonetic characters. Symbols would benefit from one.

2. Web fonts: font-face not supported.

   If font-face is not supported on certain devices like mobile phones, falling back to system fonts is problematic. Unicode symbols may not be present in any system fonts. If they are, for many designers, they will almost certainly be stylistically suboptimal. It is possible to detect font-face using the Paul Irish technique. Perhaps there could be a way to swap Unicode for images if font-face is not present.

Now, next, and a caveat

I can’t recommend using dingbats like Pictos, but the icons sure are useful as images. Beautifully crafted icon sets as carefully crafted fonts could be very useful for rapidly creating image icons for different resolution devices like the iPhone 4, and iPad.

Perhaps we could try and formulate a standard set of commonly used icons using the Unicode symbols range as a starting point. I’ve struggled to find a better visual list of the existing symbols than this Unicode symbol chart from Johannes Knabe.

Icons in fonts as Unicode symbols needs further testing in assistive devices and using font-face.

Last, but not least, I feel a bit cheeky making these suggestions. A little knowledge is a dangerous thing. Combine it with a bit of imagination, and it can be lethal. I have a limited knowledge about how fonts are created, and about Unicode. The real work would be done by others with deeper knowledge than I. I’d be fascinated to hear from Unicode, accessibility, or font experts to see if this is possible. I hope so. It feels to me like a much more elegant and sustainable solution for scalable icons than dingbat fonts.

For more on Unicode, read this long, but excellent, article recommended by my colleague, Andrei, the architect of Unicode and internationalization support in PHP 6: The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets.

Analog, Mapalong, more tries at trans-Atlantic sleep, Cuba, Fontdeck, and my youngest son entering school; it all happened in the last year. At the end of 2007, I wrote up the year very differently. After skipping a couple of years, this is a different wrap-up. To tell the truth I put this together for me, being the very worst of diarists. It meant searching through calendars, Aperture, and elsewhere. I hope it prompts me to keep a better diary. I give you: 2010 in pictures and words:

Analog.coop is still fresh after launching in December. We’re still a bit blown away by the response but decide not to do client work, but to make Mapalong instead. We jump through all kinds of hoops trying to make it happen, but ultimately it comes down to our friend and colleague, Chris Shiflett. He gets us going. It snows a lot in Bristol. The snow turns to ice. I slip around, occasionally grumpy, but mostly grinning like an idiot.

My family and I go to Cuba on our first ever all inclusive ‘package’ holiday. It’s a wonderful escape from winter, tempered by surreptitious trips out of the surreal, tourist-only island, to the other Cuba with an unofficial local guide. My boys love the jacuzzi, and sneaking into the gym. Z shoots his first arrow. Just after we return, he turns 4 years old. Now, he wants to go back.

I visit Chris in Brooklyn to work on Mapalong. We play football. Well, Chris plays. I cripple myself, and limp around a lot. At the same time I meet the irrepressible, Cameron Koczon. We all get drunk on good beer at Beer Table. Life is good. Cameron comes up with the Brooklyn Beta name. It starts to move from idea to action.

Just before Brooklyn, a discussion about First Things First opens during a talk at BathCamp. The follow-ups become passionate with posts like this straw man argument and a vociferous rejoinder.

The sun comes out. The garden becomes the new studio. Alan Colville and Jon Gibbins stop by as we work on Mapalong. The hunt starts for a co-working space in Bristol. I write pieces about self-promotion and reversed type. Worn out from the sudden burst, I go quiet again.

We find a place for our Bristol co-working studio studio. Mild Bunch HQ is born! I design desks for the first time. Our first co-workers are Adam Robertson, Kester Limb, Eugene Getov, and Ben Coleman. Chris and I meet again across the Atlantic; he makes a flying visit to Bristol. The gentle pressure mounts on fellow Analogger, Jon Gibbins to come to Bristol, too. Something special begins. Beer Fridays have started.

Fontdeck comes out of private beta! Almost 17 months after Rich Rutter and I talked about a web fonts service in Brighton for the first time, the site was live thanks to the hard work of Clearleft and OmniTI. Now it features thousands of fonts prepared for the Web, and many of the best type designers and foundries in the world.

For the first time in around 15 years I visit Belfast. At the invitation of the Standardistas, Chris and Nik, Elliot Stocks and I talk typography at the Ulster Festival of Art and Design. We’re working on the Brooklyn Beta branding, so talk about that with a bit of neuroscience thrown in as food for thought. Belfast truly is a wonderful place with fantastic people. It made it hard to miss Build for the second time later in the year.

June was busier than it felt. :)

Summer arrived in earnest. X has a blast at his school sports day. I do, too. Mild Bunch HQ is liberally dosed with shared lunches from Herbert’s bakery and Licata’s deli, and beers on balmy evenings outside The Canteen with friends. That’s all the Mild Bunch is, a group of friends with a name that made us laugh; everyone of friendly disposition is welcome!

8 Faces number 1 is published and sells out in a couple of hours. I was lucky enough to be interviewed, and to sweat over trying to narrow my choices. The .Net interview was me answering a few questions thrown my way from folks on Twitter. Great fun. Elliot, Samantha Cliffe, and I had spent a great day wandering around Montpelier taking pictures in the sun earlier in the year. One of her portraits of me appeared in both magazines. Later that month, I write about Web Fonts, Dingbats, Icons, and Unicode. It’s only my fourth post of the year.

Sometimes, some things strip me of words. Thank you.

The whole of Analog heads to Brooklyn for a Mapalong hack week with the Fictive Kin guys. We start to show it to friends and Brooklyn studio mates like Tina (Swiss Miss) who help us heaps. It’s a frantic week. I get to spend a bit of time with my Analog friend Andrei Zmievski who I haven’t seen in the flesh since 2009. Everyone works and plays hard, and we stay in some fantastic places thanks to Cameron and AirBnB.

Just before I head to NY, Z starts big school. He looks too small to start. He’s 4. How did time pass so fast? I’m still wondering that after I get back.

The whole of Analog, the Mild Bunch HQ and many others from Bristol, and as far away as Australia and India, head to New York for Brooklyn Beta! A poster whipped together my me, printed in a rush by Rik at Ripe, and transported to NY by Adam Robertson, is given as one of the souvenirs to everyone who comes.

Meanwhile, Jon Gibbins works frantically to get Mapalong ready to give BB an early glimpse of what we’re up to. Two thousand people reserve their usernames before we even go to private beta!

Chris and Cameron work tirelessly. Many, many fine people lend a hand. We add some last minute touches to the site, like listing all the crew and attendees as well as the speakers. Cameron shows off Gimme Bar with an hilarious voice-over from Bedrich Rios. Alan narrates Mapalong and we introduce our mapping app to our peers and friends!

It’s something we hoped, but never expected: Brooklyn Beta goes down as one of the best conferences ever in the eyes of veteran conference speakers and attendees. ‘Are you sure you’ve not done this before?’ I hear Jonathan Hoefler of Hoefler Frere-Jones ask Cameron. It makes me smile. The fact one of our sponsors asked this question in admiration of Chris and Cameron’s work meant a lot to me. I was proud of them, and grateful to everyone who helped it be something truly friendly, open, smart, and special.

The BB Flickr group has a lot of pictures and links to blog posts. Brooklyn Beta will return again in 2011!

X turns 7. I realise he really isn’t such a toddler anymore. It took me a while even though he amazes me constantly with his vocabulary and eloquence. His birthday party ensues with a trip to Legoland on the last weekend of the season to watch fireworks and get into trouble. Fun times finding Yoda and the rest of the Star Wars posse battling each other below the Space Shuttle exhibit.

8 Faces number two is published after being announced at Build. Much of the month was spent juggling Mapalong work, and having a great time typesetting the selections spreads for each of the eight faces chosen by the interviewees. That, and worrying with Elliot how it might print with litho. It all turned out OK. I think.

The .Net Awards take place in London. Christened the ‘nutmeg’ awards thanks to iPhone auto-correction, I’m one of millions of judges. We use it as an excuse for a party. At the end of the month, lots of the Mild Bunch go to see Caribou at The Thekla. Good times.

Mapalong goes into private beta! We start inviting many of the Brooklyn Beta folks, and others who’ve reserved their usernames. Lots of placemarks get added. Lots of feedback comes our way. Bug hunting starts. Next design steps start. We push frequently and add people as we go. Big things are planned for the new year!

The Mild Bunch Christmas do goes off with a bang thanks to Adam Robertson making sure it happened. Folks come from far and wide for a great party in The Big Chill Bar in Bristol. Lowri sneaks shots of Sambuca for the girls onto my tab, and we drink all the Innis and Gunn they have.

A few parties later, and the year draws to a close with a very traditional family Christmas in our house. Wood fires, music, the Christmas tree, and two small boys doing what kids do at Christmas. It’s just about perfect; A tonic to the background strife of the month, with a personal tragedy for me, and illness in my close family. Everything worked out OK. Steam-powered fairground rides, dressing up as dinosaurs, and detox follows with a bit of reflection. New Year’s Eve probably means staying in. Babysitters are like gold dust, but I just found we have one for tonight, so it looks like our celebration is coming early!

In the new year, I’ll be mostly trying to do the best I can for my family, my colleagues, and myself. The only goals I have are to help my children be everything they can be, make Mapalong everything we wish it to be, and feel that calm, quiet sense of peace in the evening that only comes from a day well done. Other than that I’ll keep my mind open to serendipity. (…and do something about some bits of my site and the typesetting that’s bugging me after writing this. :)

If you made it this far, thank you, and here’s to you and yours in 2011; may the best of your past be the worst of your future!

Wow, this has been a busy period. I’m just back from the Ampersand web typography conference in Brighton, and having a catch-up day in Mild Bunch HQ. Just before that I’ve been working flat out. First on Mapalong which was a grass-roots sponsor of Ampersand, and is going great guns. Then on an article for The Manual which is being published soon, and on 8 Faces #3 which is in progress right now. Not to mention the new talk for Ampersand which left me scratching my head and wondering if I was making any sense at all. More on that in a subsequent post.

In the meantime two previous events deserve a mention. (This is me starting more of a journalistic blog. :)

First of all, an interview with Simon Pascal Klien, the typographer and designer who’s curating the Design Festival podcast at the moment. We talked about all things web typography. Pascal cheekily left in a bit of noise from me in the prelude, and that rant pretty much sets the tone for the rest of the conversation. Thanks for your time, Pascal! If anyone reading this would care to listen in, the podcast can be downloaded or played from here:

Secondly, Daniel Bogan of The Setup sent me a few questions about my own tools. My answers are pretty clipped because of time, but you may find it interesting to compare this designer’s setup with your own:

I should note that in the meantime I’ve started writing with Writer, and discovered the great joy of keeping a journal and notes with a Midori Traveler’s Notebook. The latter is part of an on-going search I’m having to find Tools for Life. More on that, too at some point. Here’s my current list of topics I want to write about shortly:

• Ampersand, the aftermath
• Marrying a FujiFilm X100
• No-www
• Tools for life
• Paper versus pixels

There, I’ve written it!

I’m pleased to be able to say that Analog is joining forces with Fictive Kin! We already work together on Brooklyn Beta and other projects. We share the same ethics and ambitions. We have fun together. We’re good friends, and often old friends, too. They asked, we said yes. We had a beer. That’s pretty much how it went.

The Analog adventure that started in 2009 continues, just bigger, and hopefully better, with more fun, inspiration, and collaboration. I like to think of it like assembling Dai-X from Star Fleet but Voltron may serve if that’s more familiar to you.

It think Cameron came up with the word ‘Anakin’ from our two brands in 2010. It’s been used by us ever since whenever we get together to work or celebrate. It made me smile at the time, and even more so now, just like the echoes of the Analog identity in the lovely new Fictive Kin logo.

If you fancy keeping an eye on what we’re up to, follow @fictivekin. There’s more on the Fictive Kin blog, and in a post by Chris. Thanks for reading. Onwards!

Facebook is not only a social media giant, the company also provides valuable tools for broadcasting. Today we release a connection to Facebook, which allows to use the Facebook tools for video/audio production and publishing within Auphonic and our connected services.

The following workflows are possible with Facebook and Auphonic:

• Use Facebook for live streaming, then import, process and distribute the audio/video with Auphonic.
• Post your Auphonic audio or video productions directly to the news feed of your Facebook Page or User.
• Use Facebook as a general media hosting service and share the link or embed the audio/video on any webpage (also visible to non-Facebook users).

Connect to Facebook

First you have to connect to a Facebook account at our External Services Page, click on the "Facebook" button.

Select if you want to connect to your personal Facebook User or to a Facebook Page:

It is always possible to remove or edit the connection in your Facebook Settings (Tab Business Integrations).

Import (Live) Videos from Facebook to Auphonic

Facebook Live is an easy (and free) way to stream live videos:

We implemented an interface to use Facebook as an Incoming External Service. Please select a (live or non-live) video from your Facebook Page/User as the source of a production and then process it with Auphonic:

This workflow allows you to use Facebook for live streaming, import and process the audio/video with Auphonic, then publish a podcast and video version of your live video to any of our connected services.

Export from Auphonic to Facebook

Similar to Youtube, it is possible to use Facebook for media file hosting.
Please add your Facebook Page/User as an External Service in your Productions or Presets to upload the Auphonic results directly to Facebook:

Options for the Facebook export:

• Distribution Settings
  • Post to News Feed: The exported video is posted directly to your news feed / timeline.
  • Exclude from News Feed: The exported video is visible in the videos tab of your Facebook Page/User (see for example Auphonic's video tab), but it is not posted to your news feed (you can do that later if you want).
  • Secret: Only you can see the exported video, it is not shown in the Facebook video tab and it is not posted to your news feed (you can do that later if you want).
• Embeddable
  Choose if the exported video should be embeddable in third-party websites.

It is always possible to change the distribution/privacy and embeddable options later directly on Facebook. For example, you can export a video to Facebook as Secret and publish it to your news feed whenever you want.

If your production is audio-only, we automatically generate a video track from the Cover Image and (possible) Chapter Images.
Alternatively you can select an Audiogram Output File, if you want to add an Audiogram (audio waveform visualization) to your Facebook video - for details please see Auphonic Audiogram Generator.

Auphonic Title and Description metadata fields are exported to Facebook as well.
If you add Speech Recognition to your production, we create an SRT file with the speech recognition results and add it to your Facebook video as captions.
See the example below.

Facebook Video Hosting Example with Audiogram and Automatic Captions

Facebook can be used as a general video hosting service: even if you export videos as Secret, you will get a direct link to the video which can be shared or embedded in any third-party websites. Users without a Facebook account are also able to view these videos.

In the example below, we automatically generate an Audiogram Video for an audio-only production, use our integrated Speech Recognition system to create captions and export the video as Secret to Facebook.
Afterwards it can be embedded directly into this blog post (enable Captions if they don't show up per default) - for details please see How to embed a video:

It is also possible to just use the generated result URL from Auphonic to share the link to your video (also visible to non-Facebook users):
https://www.facebook.com/auphonic/videos/1687244844638091/

Important Note:
Facebook needs some time to process an exported video (up to a few minutes) and the direct video link won't work before the processing is finished - please try again a bit later!
On Facebook Pages, you can see the processing progress in your Video Library.

Conclusion

Facebook has many broadcasting tools to offer and is a perfect addition to Auphonic.
Both systems and our other external services can be used to create automated processing and publishing workflows. Furthermore, the export and import to/from Facebook is also fully supported in the Auphonic API.

Please contact us if you have any questions or further ideas!

At the Subscribe 9 Conference, we presented the first version of our new Audio Inspector:
The Auphonic Audio Inspector is shown on the status page of a finished production and displays details about what our algorithms are changing in audio files.

A screenshot of the Auphonic Audio Inspector on the status page of a finished Multitrack Production.
Please click on the screenshot to see it in full resolution!

It is possible to zoom and scroll within audio waveforms and the Audio Inspector might be used to manually check production result and input files.

In this blog post, we will discuss the usage and all current visualizations of the Inspector.
If you just want to try the Auphonic Audio Inspector yourself, take a look at this Multitrack Audio Inspector Example.

Inspector Usage

Control bar of the Audio Inspector with scrollbar, play button, current playback position and length, button to show input audio file(s), zoom in/out, toggle legend and a button to switch to fullscreen mode.

Seek in Audio Files

Click or tap inside the waveform to seek in files. The red playhead will show the current audio position.

Zoom In/Out

Use the zoom buttons ([+] and [-]), the mouse wheel or zoom gestures on touch devices to zoom in/out the audio waveform.

Scroll Waveforms

If zoomed in, use the scrollbar or drag the audio waveform directly (with your mouse or on touch devices).

Show Legend

Click the [?] button to show or hide the Legend, which describes details about the visualizations of the audio waveform.

Show Stats

Use the Show Stats link to display Audio Processing Statistics of a production.

Show Input Track(s)

Click Show Input to show or hide input track(s) of a production: now you can see and listen to input and output files for a detailed comparison. Please click directly on the waveform to switch/unmute a track - muted tracks are grayed out slightly:

Showing four input tracks and the Auphonic output of a multitrack production.

Please click on the fullscreen button (bottom right) to switch to fullscreen mode.
Now the audio tracks use all available screen space to see all waveform details:

A multitrack production with output and all input tracks in fullscreen mode.
Please click on the screenshot to see it in full resolution.

In fullscreen mode, it’s also possible to control playback and zooming with keyboard shortcuts:
Press [Space] to start/pause playback, use [+] to zoom in and [-] to zoom out.

Singletrack Algorithms Inspector

First, we discuss the analysis data of our Singletrack Post Production Algorithms.

The audio levels of output and input files, measured according to the ITU-R BS.1770 specification, are displayed directly as the audio waveform. Click on Show Input to see the input and output file. Only one file is played at a time, click directly on the Input or Output track to unmute a file for playback:

Singletrack Production with opened input file.
See the first Leveler Audio Example to try the audio inspector yourself.

Waveform Segments: Music and Speech (gold, blue)

Music/Speech segments are displayed directly in the audio waveform: Music segments are plotted in gold/yellow, speech segments in blue (or light/dark blue).

Waveform Segments: Leveler High/No Amplification (dark, light blue)

Speech segments can be displayed in normal, dark or light blue: Dark blue means that the input signal was very quiet and contains speech, therefore the Adaptive Leveler has to use a high amplification value in this segment.
In light blue regions, the input signal was very quiet as well, but our classifiers decided that the signal should not be amplified (breathing, noise, background sounds, etc.).

Yellow/orange background segments display leveler fades.

Background Segments: Leveler Fade Up/Down (yellow, orange)

If the volume of an input file changes in a fast way, the Adaptive Leveler volume curve will increase/decrease very fast as well (= fade) and should be placed in speech pauses. Otherwise, if fades are too slow or during active speech, one will hear pumping speech artifacts.
Exact fade regions are plotted as yellow (fade up, volume increase) and orange (fade down, volume decrease) background segments in the audio inspector.

Horizontal red lines display noise and hum reduction profiles.

Horizontal Lines: Noise and Hum Reduction Profiles (red)

Our Noise and Hiss Reduction and Hum Reduction algorithms segment the audio file in regions with different background noise characteristics, which are displayed as red horizontal lines in the audio inspector (top lines for noise reduction, bottom lines for hum reduction).
Then a noise print is extracted in each region and a classifier decides if and how much noise reduction is necessary - this is plotted as a value in dB below the top red line.
The hum base frequency (50Hz or 60Hz) and the strength of all its partials is also classified in each region, the value in Hz above the bottom red line indicates the base frequency and whether hum reduction is necessary or not (no red line).

You can try the singletrack audio inspector yourself with our Leveler, Noise Reduction and Hum Reduction audio examples.

Multitrack Algorithms Inspector

If our Multitrack Post Production Algorithms are used, additional analysis data is shown in the audio inspector.

The audio levels of the output and all input tracks are measured according to the ITU-R BS.1770 specification and are displayed directly as the audio waveform. Click on Show Input to see all the input files with track labels and the output file. Only one file is played at a time, click directly into the track to unmute a file for playback:

Input Tracks: Waveform Segments, Background Segments and Horizontal Lines

Input tracks are displayed below the output file including their track names. The same data as in our Singletrack Algorithms Inspector is calculated and plotted separately in each input track:

• Waveform Segments with different colors: Music and Speech Segments (gold, blue), Leveler High/No Amplification (dark blue, light blue)
• Background Segments: Leveler Fade Up/Down (yellow, orange)
• Horizontal Lines: Noise and Hum Reduction Profiles Noise and Hum Reduction Profiles (red)

Output Waveform Segments: Multiple Speakers and Music

Each speaker is plotted in a separate, blue-like color - in the example above we have 3 speakers (normal, light and dark blue) and you can see directly in the waveform when and which speaker is active.
Audio from music input tracks are always plotted in gold/yellow in the output waveform, please try to not mix music and speech parts in music tracks (see also Multitrack Best Practice)!

You can try the multitrack audio inspector yourself with our Multitrack Audio Inspector Example or our general Multitrack Audio Examples.

Ducking, Background and Foreground Segments

Music tracks can be set to Ducking, Foreground, Background or Auto - for more details please see Automatic Ducking, Foreground and Background Tracks.

Ducking Segments (light, dark orange)

In Ducking, the level of a music track is reduced if one of the speakers is active, which is plotted as a dark orange background segment in the output track.
Foreground music parts, where no speaker is active and the music track volume is not reduced, are displayed as light orange background segments in the output track.

Background Music Segments (dark orange background)

Here the whole music track is set to Background and won’t be amplified when speakers are inactive.
Background music parts are plotted as dark organge background segments in the output track.

Foreground Music Segments (light orange background)

Here the whole music track is set to Foreground and its level won’t be reduced when speakers are active.
Foreground music parts are plotted as light organge background segments in the output track.

You can try the ducking/background/foreground audio inspector yourself: Fore/Background/Ducking Audio Examples.

Audio Search, Chapters Marks and Video

Audio Search and Transcriptions

If our Automatic Speech Recognition Integration is used, a time-aligned transcription text will be shown above the waveform. You can use the search field to search and seek directly in the audio file.
See our Speech Recognition Audio Examples to try it yourself.

Chapters Marks

Chapter Mark start times are displayed in the audio waveform as black vertical lines.
The current chapter title is written above the waveform - see “This is Chapter 2” in the screenshot above.

A video production with output waveform, input waveform and transcriptions in fullscreen mode.
Please click on the screenshot to see it in full resolution.

Video Display

If you add a Video Format or Audiogram Output File to your production, the audio inspector will also show a separate video track in addition to the audio output and input tracks. The video playback will be synced to the audio of output and input tracks.

Supported Audio Formats

We use the native HTML5 audio element for playback and the aurora.js javascript audio decoders to support all common audio formats:

WAV, MP3, AAC/M4A and Opus

These formats are supported in all major browsers: Firefox, Chrome, Safari, Edge, iOS Safari and Chrome for Android.

FLAC

FLAC is supported in Firefox, Chrome, Edge and Chrome for Android - see FLAC audio format.
In Safari and iOS Safari, we use aurora.js to directly decode FLAC files in javascript, which works but uses much more CPU compared to native decoding!

ALAC

ALAC is not supported by any browser so far, therefore we use aurora.js to directly decode ALAC files in javascript. This works but uses much more CPU compared to native decoding!

Ogg Vorbis

Only supported by Firefox, Chrome and Chrome for Android - for details please see Ogg Vorbis audio format.

We suggest to use a recent Firefox or Chrome browser for best performance.
Decoding FLAC and ALAC files also works in Safari and iOS with the help of aurora.js, but javascript decoders need a lot of CPU and they sometimes have problems with exact scrolling and seeking.

Please see our blog post Audio File Formats and Bitrates for Podcasts for more details about audio formats.

Mobile Audio Inspector

Multiple responsive layouts were created to optimize the screen space usage on Android and iOS devices, so that the audio inspector is fully usable on mobile devices as well: tap into the waveform to set the playhead location, scroll horizontally to scroll waveforms, scroll vertically to scroll between tracks, use zoom gestures to zoom in/out, etc.

Unfortunately the fullscreen mode is not available on iOS devices (thanks to Apple), but it works on Android and is a really great way to inspect everything using all the available screen space:

Audio inspector in horizontal fullscreen mode on Android.

Conclusion

Try the Auphonic Audio Inspector yourself: take a look at our Audio Example Page or play with the Multitrack Audio Inspector Example.

The Audio Inspector will be shown in all productions which are created in our Web Service.
It might be used to manually check production result/input files and to send us detailed feedback about audio processing results.

Please let us know if you have some feedback or questions - more visualizations will be added in future!

We are pleased to announce a new Audio Inserts feature in the Auphonic API: audio inserts are separate audio files (like intros/outros), which will be inserted into your production at a defined offset.
This blog post shows how one can use this feature for Dynamic Ad Insertion and discusses other Audio Manipulation Methods of the Auphonic API.

API-only Feature

For the general podcasting hobbyist, or even for someone producing a regular podcast, the features that are accessible via our web interface are more than sufficient.

However, some of our users, like podcasting companies who integrate our services as part of their products, asked us for dynamic ad insertions. We teamed up with them to develop a way of making this work within the Auphonic API.

We are pleased therefore to announce audio inserts - a new feature that has been made part of our API. This feature is not available through the web interface though, it requires the use of our API.

Before we talk about audio inserts, let's talk about what you need to know about dynamic ad insertion!

Dynamic Ad Insertion

There are two ways of dealing with adverts within podcasts. In the first, adverts are recorded or edited into the podcast and are fixed, or baked in. The second method is to use dynamic insertion, whereby the adverts are not part of the podcast recording/file but can be inserted into the podcast afterwards, at any time.

This second approach would allow you to run new ad campaigns across your entire catalog of shows. As a podcaster this allows you to potentially generate new revenue from your old content.

As a hosting company, dynamic ad insertion allows you to choose up to date and relevant adverts across all the podcasts you host. You can make these adverts relevant by subject or location, for instance.

Your users can define the time for the ads and their podcast episode, you are then in control of the adverts you insert.

Audio Inserts in Auphonic

Whichever approach to adverts you are taking, using audio inserts can help you.

Audio inserts are separate audio files which will be inserted into your main single or multitrack production at your defined offset (in seconds).

When a separate audio file is inserted as part of your production, it creates a gap in the podcast audio file, shifting the audio back by the length of the insert. Helpfully, chapters and other time-based information like transcriptions are also shifted back when an insert is used.

The biggest advantage of this is that Auphonic will apply loudness normalization to the audio insert so, from an audio point of view, it matches the rest of the podcast.

Although created with dynamic ad insertion in mind, this feature can be used for any type of audio inserts: adverts, music songs, individual parts of a recording, etc. In the case of baked-in adverts, you could upload your already processed advert audio as an insert, without having to edit it into your podcast recording using a separate audio editing application.

Please note that audio inserts should already be edited and processed before using them in production. (This is usually the case with pre-recorded adverts anyway). The only algorithm that Auphonic applies to an audio insert is loudness normalization in order to match the loudness of the entire production. Auphonic does not add any other processing (i.e. no leveling, noise reduction etc).

Audio Inserts Coding Example

Here is a brief overview of how to use our API for audio inserts. Be warned, this section is coding heavy, so if this isn't your thing, feel free to move along to the next section!

You can add audio insert files with a call to https://auphonic.com/api/production/{uuid}/multi_input_files.json, where uuid is the UUID of your production.
Here is an example with two audio inserts from an https URL. The offset/position in the main audio file must be given in seconds:

curl -X POST -H "Content-Type: application/json" 
    https://auphonic.com/api/production/{uuid}/multi_input_files.json 
    -u username:password 
    -d '[
            {
                "input_file": "https://mydomain.com/my_audio_insert_1.wav",
                "type": "insert",
                "offset": 20.5
            },
            {
                "input_file": "https://mydomain.com/my_audio_insert_2.wav",
                "type": "insert",
                "offset": 120.3
            }
        ]'

More details showing how to use audio inserts in our API can be seen here.

Additional API Audio Manipulations

In addition to audio inserts, using the Auphonic API offers a number of other audio manipulation options, which are not available via the web interface:

Cut start/end of audio files: See Docs

In Single-track productions, this feature allows the user to cut the start and/or the end of the uploaded audio file. Crucially, time-based information such as chapters etc. will be shifted accordingly.

Fade In/Out time of audio files: See Docs

This allows you to set the fade in/out time (in ms) at the start/end of output files. The default fade time is 100ms, but values can be set between 0ms and 5000ms.
This feature is also available in our Auphonic Leveler Desktop App.

Adding intro and outro: See Docs

Automatically add intros and outros to your main audio input file, as it is also available in our web interface.

Add multiple intros or outros: See Docs

Using our API, you can also add multiple intros or outros to a production. These intros or outros are played in series.

Overlapping intros/outros: See Docs

This feature allows intros/outros to overlap either the main audio or the following/previous intros/outros.

Conclusion

If you haven't explored our API already, the new audio inserts feature allows for greater flexibility and also dynamic ad insertion.
If you offer online services to podcasters, the Auphonic API would also then allow you to pass on Auphonic's audio processing algorithms to your customers.

If this is of interest to you or you have any new feature suggestions that you feel could benefit your company, please get in touch. We are always happy to extend the functionality of our products!

If listeners find themselves using the volume up and down buttons a lot, level differences within your podcast or audio file are too big.
In this article, we are discussing why audio dynamic range processing (or leveling) is more important than loudness normalization, why it depends on factors like the listening environment and the individual character of the content, and why the loudness range descriptor (LRA) is only reliable for speech programs.

Photo by Alexey Ruban.

Why loudness normalization is not enough

Everybody who has lived in an apartment building knows the problem: you want to enjoy a movie late at night, but you're constantly on the edge - not only because of the thrilling story, but because your index finger is hovering over the volume down button of your remote. The next loud sound effect is going to come sooner rather than later, and you want to avoid waking up your neighbors with some gunshot sounds blasting from your TV.

In our previous post, we talked about the overall loudness of a production. While that's certainly important to keep in mind, the loudness target is only an average value, ignoring how much the loudness varies within a production. The loudness target of your movie might be in the ideal range, yet the level differences between a gunshot and someone whispering can still be enormous - having you turn the volume down for the former and up for the latter.

While the average loudness might be perfect, level differences can lead to an unpleasant listening experience.

Of course, this doesn't apply to movies alone. The image above shows a podcast or radio production. The loud section is music, the very quiet section just breathing, and the remaining sections are different voices.

To be clear, we're not saying that the above example is problematic per se. There are many situations, where a big difference in levels - a high dynamic range - is justified: for instance, in a movie theater, optimized for listening and without any outside noise, or in classical music.
Also, if the dynamic range is too small, listening can be tiring.

But if you watch the same movie in an outdoor screening in the summer on a beach next to the crashing waves or in the middle of a noisy city, it can be tricky to hear the softer parts.
Spoken word usually has a smaller dynamic range, and if you produce your podcast for a target audience of train or car commuters, the dynamic range should be even smaller, adjusting for the listening situation.

Therefore, hitting the loudness target has less impact on the listening experience than level differences (dynamic range) within one file!
What makes a suitable dynamic range does not only depend on the listening environment, but also on the nature of the content itself. If the dynamic range is too small, the audio can be tiring to listen to, whereas more variability in levels can make a program more interesting, but might not work in all environments, such as a noisy car.

Dynamic range experiment in a car

Wolfgang Rein, audio technician at SWR, a public broadcaster in Germany, did an experiment to test how drivers react to programs with different dynamic ranges. They monitored to what level drivers set the car stereo depending on speed (thus noise level) and audio dynamic range.
While the results are preliminary, it seems like drivers set the volume as low as possible so that they can still understand the content, but don't get distracted by loud sounds.

As drivers adjust the volume to the loudest voice in a program, they won't understand quieter speakers in content with a high dynamic range anymore. To some degree and for short periods of time, they can compensate by focusing more on the radio program, but over time that's tiring. Therefore, if the loudness varies too much, drivers tend to switch to another program rather than adjusting the volume.
Similar results have been found in a study conducted by NPR Labs and Towson University.

On the other hand, the perception was different in pure music programs. When drivers set the volume according to louder parts, they weren't able to hear softer segments or the beginning of a song very well. But that did not matter to them as much and didn't make them want to turn up the volume or switch the program.

Listener's reaction in response to frequent loudness changes. (from John Kean, Eli Johnson, Dr. Ellyn Sheffield: Study of Audio Loudness Range for Consumers in Various Listening Modes and Ambient Noise Levels)

Loudness comfort zone

The reaction of drivers to variable loudness hints at something that BBC sound engineer Mike Thornton calls the loudness comfort zone.

Tests (...) have shown that if the short-term loudness stays within the "comfort zone" then the consumer doesn’t feel the need to reach for the remote control to adjust the volume.

In a blog post, he highlights how the series Blue Planet 2 and Planet Earth 2 might not always have been the easiest to listen to. The graph below shows an excerpt with very loud music, followed by commentary just at the bottom of the green comfort zone. Thornton writes: "with the volume set at a level that was comfortable when the music was playing we couldn’t always hear the excellent commentary from Sir David Attenborough and had to resort to turning on the subtitles to be sure we knew what Sir David was saying!"

Planet Earth 2 Loudness Plot Excerpt. Colored green: comfort zone of +3 to -5LU around the loudness target. (from Mike Thornton: BBC Blue Planet 2 Latest Show In Firing Line For Sound Issues - Are They Right?)

As already mentioned above, a good mix considers the maximum and minimum possible loudness in the target listening environment.
In a movie theater the loudness comfort zone is big (loudness can vary a lot), and loud music is part of the fun, while quiet scenes work just as well. The opposite was true in the aforementioned experiment with drivers, where the loudness comfort zone is much smaller and quiet voices are difficult to understand.

Hence, the loudness comfort zone determines how much dynamic range an audio signal can use in a specific listening environment.

How to measure dynamic range: LRA

When producing audio for various environments, it would be great to have a target value for dynamic range, (the difference between the smallest and largest signal values of an audio signal) as well. Then you could just set a dynamic range target, similarly to a loudness target.

Theoretically, the maximum possible dynamic range of a production is defined by the bit-depth of the audio format. A 16-bit recording can have a dynamic range of 96 dB; for 24-bit, it's 144 dB - which is well above the approx. 120 dB the human ear can handle. However, most of those bits are typically being used to get to a reasonable base volume. Picture a glass of water: you want it to be almost full, with some headroom so that it doesn't spill when there's a sudden movement, i.e. a bigger amplitude wave at the top.

Determining the dynamic range of a production is easier said than done, though. It depends on which signals are included in the measurement: for example, if something like background music or breathing should be considered at all.
The currently preferred method for broadcasting is called Loudness Range, LRA. It is measured in Loudness Units (LU), and takes into account everything between the 10th and the 95th percentile of a loudness distribution, after an additional gating method. In other words, the loudest 5% and quietest 10% of the audio signal are being ignored. This way, quiet breathing or an occasional loud sound effect won't affect the measurement.

Loudness distribution and LRA for the film 'The Matrix'. Figure from EBU Tech Doc 3343 (p.13).

However, the main difficulty is which signals should be included in the loudness range measurement and which ones should be gated. This is unfortunately often very subjective and difficult to define with a purely statistical method like LRA.

Where LRA falls short

Therefore, only pure speech programs give reliable LRA values that are comparable!
For instance, a typical LRA for news programs is 3 LU; for talks and discussions 5 LU is common. LRA values for features, radio dramas, movies or music very much depend on the individual character and might be in the range between 5 and 25 LU.

To further illustrate this, here are some typical LRA values, according to a paper by Thomas Lund (table 2):

Program	Loudness Range
Matrix, full movie	25.0
NBC Interstitials, Jan. 2008, all together (3:30)	9.4
Friends Episode 16	6.6
Speak Ref., Male, German, SQUAM Trk 54	6.2
Speak Ref., Female, French, SQUAM Trk 51	4.8
Speak Ref., Male, English, Sound Check	3.3
Wish You Were Here, Pink Floyd	22.1
Gilgamesh, Battle of Titans, Osaka Symph.	19.7
Don’t Cry For Me Arg., Sinead O’Conner	13.7
Beethoven Son in F, Op17, Kliegel & Tichman	12.0
Rock’n Roll Train, AC/DC	6.0
I.G.Y., Donald Fagen	3.6

LRA values of music are very unpredictable as well.
For instance, Tom Frampton measured the LRA of songs in multiple genres, and the differences within each genre are quite big. The ten pop songs that he analyzed varied in LRA between 3.7 and 12 LU, country songs between 3.6 and 14.9 LU. In the Electronic genre the individual LRAs were between 3.7 and 15.2 LU. Please see the tables at the bottom of his blog post for more details.

We at Auphonic also tried to base our Adaptive Leveler parameters on the LRA descriptor. Although it worked, it turned out that it is very difficult to set a loudness range target for diverse audio content, which does include speech, background sounds, music parts, etc. The results were not predictable and it was hard to find good target values. Therefore we developed our own algorithm to measure the dynamic range of audio signals.

In conclusion, LRA comparisons are only useful for productions with spoken word only and the LRA value is therefore not applicable as a general dynamic range target value. The more complex a production gets, the more difficult it is to make any judgment based on the LRA.
This is, because the definition of LRA is purely statistical. There's no smart measurement using classifiers that distinguish between music, speech, quiet breathing, background noises and other types of audio. One would need a more intelligent algorithm (as we use in our Adaptive Leveler), that knows which audio segments should be included and excluded from the measurement.

From theory to application: tools

Loudness and dynamic range clearly is a complicated topic. Luckily, there are tools that can help. To keep short-term loudness in range, a compressor can help control sudden changes in loudness - such as p-pops or consonants like t or k. To achieve a good mid-term loudness, i.e. a signal that doesn't go outside the comfort zone too much, a leveler is a good option. Or, just use a fader or manually adjust volume curves. And to make sure that separate productions sound consistent, loudness normalization is the way to go. We have covered all of this in-depth before.

Looking at the audio from above again, with an adaptive leveler applied it looks like this:

Leveler example. Output at the top, input with leveler envelope at the bottom.

Now, the voices are evened out and the music is at a comfortable level, while the breathing has not been touched at all.
We recently extended Auphonic's adaptive leveler, so that it is now possible to customize the dynamic range - please see adaptive leveler customization and advanced multitrack audio algorithms.
If you wanted to increase the loudness comfort zone (or dynamic range) of the standard preset by 10 dB (or LU), for example, the envelope would look like this:

Leveler with higher dynamic range, only touching sections with extremely low or extremely high loudness to fit into a specific loudness comfort zone.

When a production is done, our adaptive leveler uses classifiers to also calculate the integrated loudness and loudness range of dialog and music sections separately. This way it is possible to just compare the dialog LRA and loudness of complex productions.

Assessing the LRA and loudness of dialog and music separately.

Conclusion

Getting audio dynamics right is not easy. Yet, it is an important thing to keep in mind, because focusing on loudness normalization alone is not enough. In fact, hitting the loudness target often has less impact on the listening experience than level differences, i.e. audio dynamics.

If the dynamic range is too small, the audio can be tiring to listen to, whereas a bigger dynamic range can make a program more interesting, but might not work in loud environments, such as a noisy train.
Therefore, a good mix adapts the audio dynamic range according to the target listening environment (different loudness comfort zones in cinema, at home, in a car) and according to the nature of the content (radio feature, movie, podcast, music, etc.).

Furthermore, because the definition of the loudness range / LRA is purely statistical, only speech programs give reliable LRA values that are comparable.
More "intelligent" algorithms are in development, which use classifiers to decide which signals should be included and excluded from the dynamic range measurement.

If you understand German, take a look at our presentation about audio dynamic processing in podcasts for further information:

Like most paddlers I have a tendency to shoot pictures in a horizontal (landscape) format. It is more tricky to shoot in a vertical format from my tippy kayaks, especially, when I have to use a paddle to stabilize my camera.

I love paddling on the Horsetooth Reservoir in cold season. Boat ramps are closed, no power boat traffic, usually quiet and calm. Snow and ice can enhance scenery. A great time to paddle, train, relax or photograph. The Horsetooth stays […]

Australia has introduced a streamlined, priority visa pathway for highly skilled and talented individuals to work and live permanently in Australia. The Government and industry has recognised there is growing competition for talent around the globe and to compete we must have a pathway that leads to certainty for people wishing to come to Australia. […]

The post Australia is recruiting – New Global Talent Visa appeared first on Visa Australia - Immigration Lawyers & Registered Migration Agents.