Covalent chemical modifications of cellular RNAs directly impact all biological processes. However, our mechanistic understanding of the enzymes catalyzing these modifications, their substrates and biological functions, remains vague. Amongst RNA modifications N⁶-methyladenosine (m⁶A) is widespread and found in messenger (mRNA), ribosomal (rRNA), and noncoding RNAs. Here, we undertook a systematic screen to uncover new RNA methyltransferases. We demonstrate that the methyltransferase-like 5 (METTL5) protein catalyzes m⁶A in 18S rRNA at position A₁₈₃₂. We report that absence of Mettl5 in mouse embryonic stem cells (mESCs) results in a decrease in global translation rate, spontaneous loss of pluripotency, and compromised differentiation potential. METTL5-deficient mice are born at non-Mendelian rates and develop morphological and behavioral abnormalities. Importantly, mice lacking METTL5 recapitulate symptoms of patients with DNA variants in METTL5, thereby providing a new mouse disease model. Overall, our biochemical, molecular, and in vivo characterization highlights the importance of m⁶A in rRNA in stemness, differentiation, development, and diseases.

Autophagy captures intracellular components and delivers them to lysosomes for degradation and recycling. Conditional autophagy deficiency in adult mice causes liver damage, shortens life span to 3 mo due to neurodegeneration, and is lethal upon fasting. As autophagy deficiency causes p53 induction and cell death in neurons, we sought to test whether p53 mediates the lethal consequences of autophagy deficiency. Here, we conditionally deleted Trp53 (p53 hereafter) and/or the essential autophagy gene Atg7 throughout adult mice. Compared with Atg7^/ mice, the life span of Atg7^/p53^/ mice was extended due to delayed neurodegeneration and resistance to death upon fasting. Atg7 also suppressed apoptosis induced by p53 activator Nutlin-3, suggesting that autophagy inhibited p53 activation. To test whether increased oxidative stress in Atg7^/ mice was responsible for p53 activation, Atg7 was deleted in the presence or absence of the master regulator of antioxidant defense nuclear factor erythroid 2-related factor 2 (Nrf2). Nrf2^–/–Atg7^/ mice died rapidly due to small intestine damage, which was not rescued by p53 codeletion. Thus, Atg7 limits p53 activation and p53-mediated neurodegeneration. In turn, NRF2 mitigates lethal intestine degeneration upon autophagy loss. These findings illustrate the tissue-specific roles for autophagy and functional dependencies on the p53 and NRF2 stress response mechanisms.

Cell type-specific transcriptional programs that drive differentiation of specialized cell types are key players in development and tissue regeneration. One of the most dramatic changes in the transcription program in Drosophila occurs with the transition from proliferating spermatogonia to differentiating spermatocytes, with >3000 genes either newly expressed or expressed from new alternative promoters in spermatocytes. Here we show that opening of these promoters from their closed state in precursor cells requires function of the spermatocyte-specific tMAC complex, localized at the promoters. The spermatocyte-specific promoters lack the previously identified canonical core promoter elements except for the Inr. Instead, these promoters are enriched for the binding site for the TALE-class homeodomain transcription factors Achi/Vis and for a motif originally identified under tMAC ChIP-seq peaks. The tMAC motif resembles part of the previously identified 14-bp β2UE1 element critical for spermatocyte-specific expression. Analysis of downstream sequences relative to transcription start site usage suggested that ACA and CNAAATT motifs at specific positions can help promote efficient transcription initiation. Our results reveal how promoter-proximal sequence elements that recruit and are acted upon by cell type-specific chromatin binding complexes help establish a robust, cell type-specific transcription program for terminal differentiation.

The emergence of drug resistance is a major obstacle for the success of targeted therapy in melanoma. Additionally, conventional chemotherapy has not been effective as drug-resistant cells escape lethal DNA damage effects by inducing growth arrest commonly referred to as cellular dormancy. We present a therapeutic strategy termed "targeted chemotherapy" by depleting protein phosphatase 2A (PP2A) or its inhibition using a small molecule inhibitor (1,10-phenanthroline-5,6-dione [phendione]) in drug-resistant melanoma. Targeted chemotherapy induces the DNA damage response without causing DNA breaks or allowing cellular dormancy. Phendione treatment reduces tumor growth of BRAF^V600E-driven melanoma patient-derived xenografts (PDX) and diminishes growth of NRAS^Q61R-driven melanoma, a cancer with no effective therapy. Remarkably, phendione treatment inhibits the acquisition of resistance to BRAF inhibition in BRAF^V600E PDX highlighting its effectiveness in combating the advent of drug resistance.

Peripheral somatosensory input is modulated in the dorsal spinal cord by a network of excitatory and inhibitory interneurons. PTF1A is a transcription factor essential in dorsal neural tube progenitors for specification of these inhibitory neurons. Thus, mechanisms regulating Ptf1a expression are key for generating neuronal circuits underlying somatosensory behaviors. Mutations targeted to distinct cis-regulatory elements for Ptf1a in mice, tested the in vivo contribution of each element individually and in combination. Mutations in an autoregulatory enhancer resulted in reduced levels of PTF1A, and reduced numbers of specific dorsal spinal cord inhibitory neurons, particularly those expressing Pdyn and Gal. Although these mutants survive postnatally, at ~3–5 wk they elicit a severe scratching phenotype. Behaviorally, the mutants have increased sensitivity to itch, but acute sensitivity to other sensory stimuli such as mechanical or thermal pain is unaffected. We demonstrate a requirement for positive transcriptional autoregulatory feedback to attain the level of the neuronal specification factor PTF1A necessary for generating correctly balanced neuronal circuits.

Background and objective

Exercise is a cornerstone of management for type 2 diabetes; however, little is known about the cardiovascular (CV) response to submaximal functional exercise in people with type 2 diabetes. The aim of this study was to compare performance and CV response during a 6-minute walk test (6MWT) between people with type 2 diabetes and matched control subjects.

Editor’s Note: This article is adapted from the address Ms. Valentine delivered as the recipient of the American Diabetes Association’s (ADA’s) Outstanding Educator in Diabetes Award for 2019. She delivered the address in June 2019 at the Association’s 79th Scientific Sessions in San Francisco, CA. A webcast of this speech is available for viewing at the ADA website (professional.diabetes.org/webcast/outstanding-educator-diabetes-award-lecture%E2%80%94-most-important-thing-we-give-people-hope).

A multidisciplinary endocrinologist-led shared medical appointment (SMA) model showed statistically significant reductions in A1C from baseline over 3 years that were not significantly different from appointments with endocrinologists or primary care providers alone within a resource-poor population. Similarly, the SMA model achieved clinical outcomes on par with endocrinologist-only visits with the added benefit of improving endocrine provider productivity and specialty access for patients. Greater patient engagement with the SMA model was associated with significantly lower A1C.

From a behavioral perspective, therapeutic inertia can happen when obstacles to changing a diabetes treatment plan outweigh perceived benefits. There is a complex interaction of important treatment-related obstacles for people with diabetes (PWD), their treating health care professional (HCP), and the clinical setting in which they interact. Tipping the scales toward more effective action involve strategies that increase perceptions of the benefits of treatment intensification while addressing important obstacles so that treatment changes are seen by both PWD and HCPs as worthwhile and achievable.

Despite significant advances in therapies for pediatric type 1 diabetes, achievement of glycemic targets remains elusive, and management remains burdensome for patients and their families. This article identifies common challenges in diabetes management at the patient-provider and health care system levels and proposes practical approaches to overcoming therapeutic inertia to enhance health outcomes for youth with type 1 diabetes.

Many people with diabetes do not achieve individualized treatment targets. Therapeutic inertia, the underuse of effective therapies in preventing serious clinical end points, is a frequent, important contributor to this failure. Clinicians, patients, health systems, payors, and producers of medications, devices, and other products for those with diabetes all play a role in the development of therapeutic inertia and can all help to reduce it.

Background and objectives

The effects of active case finding (ACF) models that mobilise community networks for early identification and treatment of tuberculosis (TB) remain unknown. We investigated and compared the effect of community-based ACF using a seed-and-recruit model with one-off roving ACF and passive case finding (PCF) on the time to treatment initiation and identification of bacteriologically confirmed TB.

Recent advances in cough research suggest a more widespread use of cough-provocation tests to demonstrate the hypersensitivity of the cough reflex arc. Cough-provocation tests with capsaicin or acidic aerosols have been used for decades in scientific studies. Several factors have hindered their use in everyday clinical work: i.e. lack of standardisation, the need for special equipment and the limited clinical importance of the response. Cough-provocation tests with hypertonic aerosols (CPTHAs) involve provocations with hypertonic saline, hypertonic histamine, mannitol and hyperpnoea. They probably act via different mechanisms than capsaicin and acidic aerosols. They are safe and well tolerated and the response is repeatable. CPTHAs can assess not only the sensitivity of the cough reflex arc but also the tendency of the airway smooth muscles to constrict (airway hyper-responsiveness). They can differentiate between subjects with asthma or chronic cough and healthy subjects. The responsiveness to CPTHAs correlates with the cough-related quality of life among asthmatic subjects. Furthermore, the responsiveness to them decreases during treatment of chronic cough. A severe response to CPTHAs may indicate poor long-term prognosis in chronic cough. The mannitol test has been stringently standardised, is easy to administer with simple equipment, and has regulatory approval for the assessment of airway hyper-responsiveness. Manual counting of coughs during a mannitol challenge would allow the measurement of the function of the cough reflex arc as a part of clinical routine.

Management of cystic fibrosis has been revolutionised by the introduction of cystic fibrosis transmembrane conductance regulator (CFTR) modulators. These compounds treat the underlying molecular basis of the disease by increasing activity of defective CFTR channels, which improves many clinical parameters and enhances patient quality of life [1]. Next-generation modulators, also known as triple combination therapy, promise to be highly efficacious in up to 90% of patients [2] and will likely dramatically change the landscape of cystic fibrosis disease. Studies examining individuals before and after initiation of CFTR modulators have revealed novel functions of CFTR and shown that CFTR modulators do not reverse all disease manifestations [3–5]. Thus, knowledge of the post-modulator cystic fibrosis disease state is crucial for understanding what continued therapies will be needed for people with cystic fibrosis and what new challenges may arise.

Background

The increasing incidence of life-threatening Pneumocystis pneumonia (PCP) in non-HIV immunocompromised patients is a global concern. Yet, no reports have examined the prognostic significance of pre-existing interstitial lung disease (ILD) in non-HIV PCP.

Chronic cough is a common complaint in the general population but there are no precise data on the incidence of, and prospectively examined risk factors for chronic cough in a population-based setting. Therefore, we investigated the period prevalence, incidence and risk factors for chronic cough in adult subjects.

In a prospective population-based cohort study among subjects aged ≥45 years, data on chronic cough were collected on two separate occasions using a standardised questionnaire. Chronic cough was defined as daily coughing for at least 3 months duration during the preceding 2 years. Potential risk factors were gathered by interview, physical examination and several investigations.

Of the 9824 participants in this study, 1073 (10.9%) subjects had chronic cough at baseline. The prevalence of chronic cough increased with age and peaked in the eighth decade. In subjects aged <70 years, chronic cough was more common in women. During an average follow-up of 6 years, 439 incident cases of chronic cough occurred with an overall incidence rate of 11.6 per 1000 person-years (95% CI 10.6–12.8). In current smokers, the incidence of chronic cough was higher in men. In the multivariable analysis, current smoking, gastro-oesophageal reflux disease (GORD), asthma and COPD were identified as risk factors for chronic cough.

Chronic cough is common among adults and highly prevalent in the older population. Current smoking, GORD, asthma and COPD are independent risk factors for chronic cough. Individuals at risk of developing chronic cough may benefit from smoking cessation and control of the underlying disease.

Background

COPD patients account for a large proportion of lung transplants; lung transplantation survival benefit for COPD patients is not well established.

Background

We aimed to investigate the epidemiological and clinical features, and medical care-seeking process of patients with the 2019 coronavirus disease (COVID-19) in Wuhan, China, to provide useful information to contain COVID-19 in other places with similar outbreaks of the virus.

Background

Positive serology for cytomegalovirus (CMV) has been associated with all-cause mortality risk but its role in COPD mortality is unknown. The objective of the present study was to assess the relationship between CMV serology and COPD mortality.

Electronic cigarettes (e-cigarettes) have been used in many countries for >10 years and in this time, there has been a division of opinions amongst both the general public and health professionals regarding the benefit or harms of e-cigarettes. Prior to the reporting of a new phenomenon known as vaping-associated pulmonary injury (VAPI), public opinion about the relative harm of e-cigarettes were increasing but they were perceived as less harmful than cigarettes by one third of people [1]. The recent cases of severe illness and death attributable to VAPI were first described in September 2019 [2]. VAPI appears to be related to either the addition of cannabis/cannabis derivates or vitamin E acetate [3], and as such has not caused radical swing away from the use of e-cigarettes without cannabis or cannabis derivates.

Eligibility criteria for a biologic treatment for severe asthma include poor disease control despite a full medication plan according to Global Initiative for Asthma steps 4–5 [1]. Adherence to inhaled therapy should be verified as part of that prescription requirement [2]. In fact, it has been demonstrated that poor adherence is a major cause of uncontrolled asthma, regardless of its severity [3]. Furthermore, biologics do not exert a disease-modifying effect [4]; in contrast to allergen immunotherapy, which is able to permanently modulate the way the immune system reacts to allergens beyond the immunotherapy treatment course [5], biologic therapy withdrawal usually leads to asthma relapse [4]. Thus, a low adherence rate to inhaled treatment in patients undergoing biologic therapy raises some issues related to sustainability.

ABSTRACT

Bezlotoxumab is a human monoclonal antibody against Clostridium difficile toxin B, indicated to prevent recurrence of C. difficile infection (rCDI) in high-risk adults receiving antibacterial treatment for CDI. An exploratory genome-wide association study investigated whether human genetic variation influences bezlotoxumab response. DNA from 704 participants who achieved initial clinical cure in the phase 3 MODIFY I/II trials was genotyped. Single nucleotide polymorphisms (SNPs) and human leukocyte antigen (HLA) imputation were performed using IMPUTE2 and HIBAG, respectively. A joint test of genotype and genotype-by-treatment interaction in a logistic regression model was used to screen genetic variants associated with response to bezlotoxumab. The SNP rs2516513 and the HLA alleles HLA-DRB1*07:01 and HLA-DQA1*02:01, located in the extended major histocompatibility complex on chromosome 6, were associated with the reduction of rCDI in bezlotoxumab-treated participants. Carriage of a minor allele (homozygous or heterozygous) at any of the identified loci was related to a larger difference in the proportion of participants experiencing rCDI versus placebo; the effect was most prominent in the subgroup at high baseline risk for rCDI. Genotypes associated with an improved bezlotoxumab response showed no association with rCDI in the placebo cohort. These data suggest that a host-driven, immunological mechanism may impact bezlotoxumab response. Trial registration numbers are as follows: NCT01241552 (MODIFY I) and NCT01513239 (MODIFY II).

IMPORTANCE Clostridium difficile infection is associated with significant clinical morbidity and mortality; antibacterial treatments are effective, but recurrence of C. difficile infection is common. In this genome-wide association study, we explored whether host genetic variability affected treatment responses to bezlotoxumab, a human monoclonal antibody that binds C. difficile toxin B and is indicated for the prevention of recurrent C. difficile infection. Using data from the MODIFY I/II phase 3 clinical trials, we identified three genetic variants associated with reduced rates of C. difficile infection recurrence in bezlotoxumab-treated participants. The effects were most pronounced in participants at high risk of C. difficile infection recurrence. All three variants are located in the extended major histocompatibility complex on chromosome 6, suggesting the involvement of a host-driven immunological mechanism in the prevention of C. difficile infection recurrence.

ABSTRACT

The prevailing paradigm in obstetrics has been the sterile womb hypothesis. However, some are asserting that the placenta, intra-amniotic environment, and fetus harbor microbial communities. The objective of this study was to determine whether the fetal and placental tissues of rhesus macaques harbor bacterial communities. Fetal, placental, and uterine wall samples were obtained from cesarean deliveries without labor (~130/166 days gestation). The presence of bacteria in the fetal intestine and placenta was investigated through culture. The bacterial burden and profiles of the placenta, umbilical cord, and fetal brain, heart, liver, and colon were determined through quantitative real-time PCR and DNA sequencing. These data were compared with those of the uterine wall as well as to negative and positive technical controls. Bacterial cultures of fetal and placental tissues yielded only a single colony of Cutibacterium acnes. This bacterium was detected at a low relative abundance (0.02%) in the 16S rRNA gene profile of the villous tree sample from which it was cultured, yet it was also identified in 12/29 background technical controls. The bacterial burden and profiles of fetal and placental tissues did not exceed or differ from those of background technical controls. By contrast, the bacterial burden and profiles of positive controls exceeded and differed from those of background controls. Among the macaque samples, distinct microbial signals were limited to the uterine wall. Therefore, using multiple modes of microbiologic inquiry, there was not consistent evidence of bacterial communities in the fetal and placental tissues of rhesus macaques.

IMPORTANCE Microbial invasion of the amniotic cavity (i.e., intra-amniotic infection) has been causally linked to pregnancy complications, especially preterm birth. Therefore, if the placenta and the fetus are typically populated by low-biomass microbial communities, current understanding of the role of microbes in reproduction and pregnancy outcomes will need to be fundamentally reconsidered. Could these communities be of benefit by competitively excluding potential pathogens or priming the fetal immune system for the microbial bombardment it will experience upon delivery? If so, what properties (e.g., microbial load and community membership) of these microbial communities preclude versus promote intra-amniotic infection? Given the ramifications of the in utero colonization hypothesis, critical evaluation is required. In this study, using multiple modes of microbiologic inquiry (i.e., culture, quantitative real-time PCR [qPCR], and DNA sequencing) and controlling for potential background DNA contamination, we did not find consistent evidence for microbial communities in the placental and fetal tissues of rhesus macaques.

ABSTRACT

Members of family Coronaviridae cause a variety of diseases in birds and mammals. Porcine hemagglutinating encephalomyelitis virus (PHEV), a lesser-researched coronavirus, can infect naive pigs of any age, but clinical disease is observed in pigs ≤4 weeks of age. No commercial PHEV vaccines are available, and neonatal protection from PHEV-associated disease is presumably dependent on lactogenic immunity. Although subclinical PHEV infections are thought to be common, PHEV ecology in commercial swine herds is unknown. To begin to address this gap in knowledge, a serum IgG antibody enzyme-linked immunosorbent assay (ELISA) based on the S1 protein was developed and evaluated on known-status samples and then used to estimate PHEV seroprevalence in U.S. sow herds. Assessment of the diagnostic performance of the PHEV S1 ELISA using serum samples (n = 924) collected from 7-week-old pigs (n = 84; 12 pigs per group) inoculated with PHEV, porcine epidemic diarrhea virus, transmissible gastroenteritis virus, porcine respiratory coronavirus, or porcine deltacoronavirus showed that a sample-to-positive cutoff value of ≥0.6 was both sensitive and specific, i.e., all PHEV-inoculated pigs were seropositive from days postinoculation 10 to 42, and no cross-reactivity was observed in samples from other groups. The PHEV S1 ELISA was then used to estimate PHEV seroprevalence in U.S. sow herds (19 states) using 2,756 serum samples from breeding females (>28 weeks old) on commercial farms (n = 104) with no history of PHEV-associated disease. The overall seroprevalence was 53.35% (confidence interval [CI], ±1.86%) and herd seroprevalence was 96.15% (CI, ±3.70%).

IMPORTANCE There is a paucity of information concerning the ecology of porcine hemagglutinating encephalomyelitis virus (PHEV) in commercial swine herds. This study provided evidence that PHEV infection is endemic and highly prevalent in U.S. swine herds. These results raised questions for future studies regarding the impact of endemic PHEV on swine health and the mechanisms by which this virus circulates in endemically infected populations. Regardless, the availability of the validated PHEV S1 enzyme-linked immunosorbent assay (ELISA) provides the means for swine producers to detect and monitor PHEV infections, confirm prior exposure to the virus, and to evaluate the immune status of breeding herds.

ABSTRACT

Aspergillus flavus, a ubiquitous and saprophytic fungus, is the second most common cause of aspergillosis worldwide. Several mechanisms contribute to the establishment of the fungal infection. Extracellular vesicles (EVs) have been described as "virulence factor delivery bags" in several fungal species, demonstrating a crucial role during the infection. In this study, we evaluated production of A. flavus EVs and their immunomodulatory functions. We verified that A. flavus EVs induce macrophages to produce inflammatory mediators, such as nitric oxide, tumor necrosis factor alpha (TNF-α), interleukin-6 (IL-6), and IL-1β. Furthermore, the A. flavus EVs enhance phagocytosis and killing by macrophages and induce M1 macrophage polarization in vitro. In addition, a prior inoculation of A. flavus EVs in Galleria mellonella larvae resulted in a protective effect against the fungal infection. Our findings suggest that A. flavus EVs are biologically active and affect the interaction between A. flavus and host immune cells, priming the innate immune system to eliminate the fungal infection. Collectively, our results suggest that A. flavus EVs play a crucial role in aspergillosis.

IMPORTANCE Immunocompromised patients are susceptible to several fungal infections. The genus Aspergillus can cause increased morbidity and mortality. Developing new therapies is essential to understand the fungal biology mechanisms. Fungal EVs carry important virulence factors, thus playing pivotal roles in fungal pathophysiology. No study to date has reported EV production by Aspergillus flavus, a fungus considered to be the second most common cause of aspergillosis and relevant food contaminator found worldwide. In this study, we produced A. flavus EVs and evaluated the in vitro immunomodulatory effects of EVs on bone marrow-derived macrophages (BMDMs) and in vivo effects in a Galleria mellonella model.

ABSTRACT

The chemical structures of soluble fiber carbohydrates vary from source to source due to numerous possible linkage configurations among monomers. However, it has not been elucidated whether subtle structural variations might impact soluble fiber fermentation by colonic microbiota. In this study, we tested the hypothesis that subtle structural variations in a soluble polysaccharide govern the community structure and metabolic output of fermenting microbiota. We performed in vitro fecal fermentation studies using arabinoxylans (AXs) from different classes of wheat (hard red spring [AX_HRS], hard red winter [AX_HRW], and spring red winter [AX_SRW]) with identical initial microbiota. Carbohydrate analyses revealed that AX_SRW was characterized by a significantly shorter backbone and increased branching compared with those of the hard varieties. Amplicon sequencing demonstrated that fermentation of AX_SRW resulted in a distinct community structure of significantly higher richness and evenness than those of hard-AX-fermenting cultures. AX_SRW favored OTUs within Bacteroides, whereas AX_HRW and AX_HRS favored Prevotella. Accordingly, metabolic output varied between hard and soft varieties; higher propionate production was observed with AX_SRW and higher butyrate and acetate with AX_HRW and AX_HRS. This study showed that subtle changes in the structure of a dietary fiber may strongly influence the composition and function of colonic microbiota, further suggesting that physiological functions of dietary fibers are highly structure dependent. Thus, studies focusing on interactions among dietary fiber, gut microbiota, and health outcomes should better characterize the structures of the carbohydrates employed.

IMPORTANCE Diet, especially with respect to consumption of dietary fibers, is well recognized as one of the most important factors shaping the colonic microbiota composition. Accordingly, many studies have been conducted to explore dietary fiber types that could predictably manipulate the colonic microbiota for improved health. However, the majority of these studies underappreciate the vastness of fiber structures in terms of their microbial utilization and omit detailed carbohydrate structural analysis. In some cases, this causes conflicting results to arise between studies using (theoretically) the same fibers. In this investigation, by performing in vitro fecal fermentation studies using bran arabinoxylans obtained from different classes of wheat, we showed that even subtle changes in the structure of a dietary fiber result in divergent microbial communities and metabolic outputs. This underscores the need for much higher structural resolution in studies investigating interactions of dietary fibers with gut microbiota, both in vitro and in vivo.

ABSTRACT

In numerous instances, tracking the biological significance of a nucleic acid sequence can be augmented through the identification of environmental niches in which the sequence of interest is present. Many metagenomic data sets are now available, with deep sequencing of samples from diverse biological niches. While any individual metagenomic data set can be readily queried using web-based tools, meta-searches through all such data sets are less accessible. In this brief communication, we demonstrate such a meta-metagenomic approach, examining close matches to the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in all high-throughput sequencing data sets in the NCBI Sequence Read Archive accessible with the "virome" keyword. In addition to the homology to bat coronaviruses observed in descriptions of the SARS-CoV-2 sequence (F. Wu, S. Zhao, B. Yu, Y. M. Chen, et al., Nature 579:265–269, 2020, https://doi.org/10.1038/s41586-020-2008-3; P. Zhou, X. L. Yang, X. G. Wang, B. Hu, et al., Nature 579:270–273, 2020, https://doi.org/10.1038/s41586-020-2012-7), we note a strong homology to numerous sequence reads in metavirome data sets generated from the lungs of deceased pangolins reported by Liu et al. (P. Liu, W. Chen, and J. P. Chen, Viruses 11:979, 2019, https://doi.org/10.3390/v11110979). While analysis of these reads indicates the presence of a similar viral sequence in pangolin lung, the similarity is not sufficient to either confirm or rule out a role for pangolins as an intermediate host in the recent emergence of SARS-CoV-2. In addition to the implications for SARS-CoV-2 emergence, this study illustrates the utility and limitations of meta-metagenomic search tools in effective and rapid characterization of potentially significant nucleic acid sequences.

IMPORTANCE Meta-metagenomic searches allow for high-speed, low-cost identification of potentially significant biological niches for sequences of interest.

This paper focuses on handheld and top-of-hole techniques which have appeared since 2007 or have undergone major improvements, and discusses their benefits, challenges and pitfalls, why we use them and what to expect from them. There is an ongoing need to be innovative with the way we undertake mineral exploration. Recent technological advances that have been applied to successful mineral exploration include on-site or portable instruments, on-site laboratory technologies, various core scanners, and technologies for fluid analysis. Portable or field technologies such as pXRF, pXRD, pNIR-SWIR, µRaman and LIBS aid in obtaining chemical and mineralogical information. Spectral gamma tools, a well-known technology, recently took advantage of improved ground and airborne (drone) instruments, to complement hyperspectral imagery. At mine and exploration sites, top-of-hole sensing technologies, such as Lab-at-Rig® and various core scanners (both spectral- and XRF-based) have become useful tools to analyse metres of core as it is being drilled. Fluid analyses are not as common as analyses of solid materials, but there are advances in such technologies as anodic stripping voltammetry, polarography and ion-exchange electrodes aiming for analysis of commodity or environmentally important elements.

Field-portable geochemical techniques and on-site technologies now offer instant response and flexibility for most exploration tasks. By providing relevant data within minutes, they allow safer field decisions and focus on the most promising finds, while saving valuable resources in sampling grids or drilling. More efficient laboratory analysis programs are supported by sample screening and homogeneity checking on-site. Field analyses are not always as accurate as laboratory ones, but most of the time can be correlated with them, enabling reliable decisions. The level of confidence in field-made decisions needs to be compared between later and less numerous laboratory analyses, and less precise but more abundant and immediate field analyses. It may be demonstrated that, in many cases, the fit–for-purpose nature of the latter allows a better confidence level. Quality compromises associated with field analyses can be reduced by the application of better sample preparation and quality assurance/quality control (QA/QC) procedures. Most of the further development of on-site chemical analysis is expected to be based on its integration with lab methods and on sound QA/QC practice, allowing a precise evaluation of its confidence level and uncertainties. Mineralogical analyses are constrained by our ability to interpret the data in near-real time but offer promising approaches in both surface and drilling exploration campaigns.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

Among the emerging techniques to detect the real footprint of buried ore deposits is isotope tracing. Novel and automated preparation systems such as continuous flow isotope ratio mass spectrometry, off-axis integrated cavity output spectroscopy for isotopic compositions of selected molecules, multi-collector inductively coupled-plasma mass spectrometry (ICP-MS), triple quadrupole ICP-MS, laser ablation ICP-MS, and a multitude of inline preparation systems have facilitated the use of isotopes as tracers in mineral exploration, as costs for isotope analyses have decreased and the time required for the analyses has improved. In addition, the isotope systems being used have expanded beyond the traditional light stable and Pb isotopes to include a multitude of elements that behave differently during processes that promote the mobilization of elements during both primary and secondary dispersion. Isotopes are also being used to understand barren areas that lack a critical process to form an ore deposit and to reveal precise redox mechanisms. The goal is to be able to use isotopes to reflect a definitive process that occurs in association with the deposit and not in barren systems, and then to relate these to something that is easier to measure, namely elemental concentrations. As new generations of exploration and environmental scientists are becoming more comfortable with the application of isotopes to effectively trace processes involved in geoscience, and new technologies for rapid and inexpensive analyses of isotopes are continually being developed, novel applications of isotope tracing are becoming more mainstream.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

There is a pressing need for new exploration tools to target and vector towards mineralization in covered terrains. Groundwater provides a valuable and under-utilized geochemical sampling medium, and represents an important and cost-effective tool to expose covered terrains to systematic exploration. For Au exploration, researchers agree the best hydrogeochemistry pathfinder is dissolved Au itself, with additional potential from other pathfinders (albeit non-unique) such as As, Ag, W and Mo. Despite Au's relatively low solubility, with rigorous field protocols and appropriate analytical methods, explorers can respond to dissolved Au directly with robust parts per trillion (ppt)-level analyses.

Even with ppt-level analyses, a practical implication of Au's low solubility is that a deposit's dissolved Au signature is generally weaker than seen in other more mobile pathfinders, producing a smaller detectable footprint, which must be considered when designing exploration programmes. Using purpose-drilled groundwater sampling bores, explorers can collect groundwater samples at the density required to respond to dissolved Au where existing borehole coverage is otherwise insufficient. In addition to its use at the regional scale, with even tighter sample density, hydrogeochemistry also shows promise at the project scale, allowing the 3D modelling of pathfinder dispersion.

For hydrogeochemistry to be widely adopted for Au exploration, explorers need confidence in ppt-level dissolved Au analyses, and the context to understand their significance. This paper aims to address these topics and provide a straightforward starting point for Au explorers interested in applying hydrogeochemistry by: (i) summarizing examples of regional sampling programmes and more focused case studies to illustrate how covered Au deposits create measurable dissolved Au footprints distinguishable from background; and (ii) sharing examples of dissolved Au analyses that are being integrated into exploration at the regional and project scales.

As seen in the results, the distributions of dissolved Au in the regional- and project-scale programmes show remarkably similar and easy to interpret high-contrast, low-frequency anomalies against relatively low backgrounds. These are desirable attributes of any geochemical pathfinder. When combined with the benefits of hydrogeochemistry v. other geochemical exploration tools (e.g. groundwater can create larger footprints requiring fewer samples to detect, and groundwater can recharge from depth to reflect deeper mineralization), dissolved Au is a powerful pathfinder ideally suited for Au exploration in covered terrains.

While this paper focuses on the use of dissolved Au, additional pathfinders can provide valuable information, including indications of lithological changes, hydrothermal alteration and different styles of mineralization, as well as opportunities to use secondary pathfinders when sample density or local conditions may not result in detectable dissolved Au signatures.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

In the past decade, significant research efforts have been devoted to mineral chemistry studies to assist porphyry exploration. These activities can be divided into two major fields of research: (1) porphyry indicator minerals (PIMs), which are used to identify the presence of, or potential for, porphyry-style mineralization based on the chemistry of magmatic minerals such as zircon, plagioclase and apatite, or resistate hydrothermal minerals such as magnetite; and (2) porphyry vectoring and fertility tools (PVFTs), which use the chemical compositions of hydrothermal minerals such as epidote, chlorite and alunite to predict the likely direction and distance to mineralized centres, and the potential metal endowment of a mineral district. This new generation of exploration tools has been enabled by advances in and increased access to laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), short-wave length infrared (SWIR), visible near-infrared (VNIR) and hyperspectral technologies. PIMs and PVFTs show considerable promise for exploration and are starting to be applied to the diversity of environments that host porphyry and epithermal deposits globally. Industry has consistently supported development of these tools, and in the case of PVFTs encouraged by several successful blind tests where deposit centres have successfully been predicted from distal propylitic settings. Industry adoption is steadily increasing but is restrained by a lack of the necessary analytical equipment and expertise in commercial laboratories, and also by the ongoing reliance on well-established geochemical exploration techniques (e.g. sediment, soil and rock chip sampling) that have aided the discovery of near-surface resources over many decades, but are now proving less effective in the search for deeply buried mineral resources and for those concealed under cover.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

There have been several advances in inductively coupled plasma-mass spectrometer (ICP-MS) analytical technologies in the last decade. Collision/reaction cell ICP-MS and triple quadrupole ICP-MS techniques can produce lower detection limits for select elements that experience interferences with a standard quadrupole (e.g. Se and As). Triple quadrupole ICP-MS, in particular, can eliminate virtually all polyatomic or isobaric interferences for highly accurate measurements of some element isotopes systematics that are of great interest in mineral exploration, namely Pb/Pb. Laser ablation ICP-MS has become more popular as an effective analytical tool to measure mineral grain trace elements, which could assist in vectoring to mineralization or exploration drill targets. The ablation of a spot on a Li-borate fused glass disk paired with XRF analysis has also gained popularity as an alternative to total whole rock characterization packages that employ several separate digestions and analytical methods. While there have been several advancements in ICP-MS technologies in exploration geochemistry, they have not been widely accepted or implemented. This slow adaptation could be due to the extended recession in the mining industry between 2012 and 2017. It is also possible that standard ICP-MS data (i.e. no collision/reaction cell) is still fit for purpose. This stands in stark contrast to implementation of ICP-MS in the previous decade (1997–2007), which was transformational for the industry.

Consideration of all elements from large multi-element ICP-MS analytical suites for mineral exploration can be an extremely powerful tool in the exploration toolkit. The discovery of the White Gold District, Yukon, is a prime example of how the utilization of soil geochemical data, when plotted spatially, can vector to gold mineralization. The presence of Au + As + Sb soil anomalies were key to delineating mineralization, especially when accompanied by publicly available geological, geographical and geophysical data. Additionally, elements and element ratios not typically considered in Au exploration, including Ni and U, were utilized to determine the lithological and structural controls on mineralization. The availability of multi-element ICP-MS data was also useful in the discovery of the Cascadero Copper Taron Caesium deposit. Ore-grade Cs was discovered only because Cs was included in the multi-element ICP-MS exploration geochemistry suite. Before the availability of ICP-MS, it is unlikely that this deposit would have been discovered.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

Mineral exploration under relatively young, exotic cover still presents a major challenge to discovery. Advances and future developments can be categorized in four key areas, (1) understanding metal mobility and mechanisms, (2) rapid geochemical analyses, (3) data access, integration and interoperability and (4) innovation in laboratory-based methods.

Application of ‘regolith-style' surface mapping in covered terrains outside of conventional lateritic terrains is achieving success in terms of reducing background noise and improving geochemical contrasts. However, process models for anomaly generation are still uncertain and require further research. The interaction between the surface environment, microbes, hydrocarbons and chemistry is receiving greater attention. While significant progress has been achieved in understanding the role of vegetation, interaction with the water table and cycling of metals in the near surface environment in Australia, other regions of the world, for example, the till-covered terrains in the northern hemisphere and arid colluvium-covered areas of South America, have seen less progress. In addition to vegetation, the influence of bacteria, fungi and invertebrates is not as well studied with respect to metal mobilization in cover. Field portable XRF has become a standard field technique, though more often used in a camp setting. Apart from a tweaking of analytical quality, instruments have probably reached their peak of analytical development with add-ons, such as cameras, beam-limiters, wireless transmission and GPS as the main differences between instrument suppliers. Their future rests in automated application in unconventional configurations, for example, core scanning and better integration of analytical data with other information such as spectral analyses. Pattern drilling that persists in industry, however, has benefited from innovative application of field-portable tools along with rock and mineral chemistry to provide near real-time results and assist in a shift toward more flexible and targeted drilling in greenfields settings.

Innovation in the laboratory continues to progress. More selective geochemical analysis, imaging of fine particle size fractions and resistate mineral phases and isotope analysis are faster and more accessible than ever before. The application of genomics (and data analysis) as mineral exploration tools is on the horizon. A continuing problem in geoscience, the supply to industry of suitably trained geochemists, persists although some needs, particularly at junior level, will be met by recent initiatives at various universities at graduate level. Unfortunately, the current economic climate has had a significant impact on R&D and retention of geochemistry skills by the industry. Whilst the future is positive, significant investment is required to develop the next generation of geochemical exploration tools and concepts.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

The bioprocessing industry uses recombinant mammalian cell lines to generate therapeutic biologic drugs. To ensure consistent product quality of the therapeutic proteins, it is imperative to have a controlled production process. Regulatory agencies and the biotechnology industry consider cell line "clonal origin" an important aspect of maintaining process control. Demonstration of clonal origin of the cell substrate, or production cell line, has received considerable attention in the past few years, and the industry has improved methods and devised standards to increase the probability and/or assurance of clonal derivation. However, older production cell lines developed before the implementation of these methods, herein referred to as "legacy cell lines," may not meet current regulatory expectations for demonstration of clonal derivation. In this article, the members of the IQ Consortium Working Group on Clonality present our position that the demonstration of process consistency and product comparability of critical quality attributes throughout the development life cycle should be sufficient to approve a license application without additional genetic analysis to support clonal origin, even for legacy cell lines that may not meet current day clonal derivation standards. With this commentary, we discuss advantages and limitations of genetic testing methods to support clonal derivation of legacy cell lines and wish to promote a mutual understanding with the regulatory authorities regarding their optional use during early drug development, subsequent to Investigational New Drug (IND) application and before demonstration of product and process consistency at Biologics License Applications (BLA) submission.

For manufacturers of both sterile and nonsterile pharmaceuticals, there is an expectation that the manufacturing process is performed in a manner that prevents extraneous contamination so that the products are provided in a safe, integral, pure, and unadulterated form. As part of that process, cleaning and disinfection are an absolute necessity. Although cleaning and disinfection support control of microbial contamination through preventive and corrective action, specific compendia methods do not currently exist. The intent of this paper is to provide a general guidance on how to perform disinfectant efficacy validation and implementation. This includes how to make sure the concepts are understood, how to interpret facility data and utilize it to demonstrate control awareness for your facilities, and how to leverage the data to reduce redundancies in validation or verification. This paper represents the thoughts and best practices of the authoring team and their respective companies and provides an efficient way to qualify disinfectants without impacting the quality of the study. If you choose to follow the recommendations in this paper, you must ensure that the appropriate rationale is sound and the scientific data is documented. It is the belief of the authoring team that only then will this approach meet regulatory requirements.

Trumenba (MenB-FHbp; bivalent rLP2086), the first meningococcal serogroup B vaccine approved in the United States and subsequently approved in Europe, Canada, and Australia, is well-characterized. Pfizer devised a control strategy approach by using a simplified control strategy wheel for Trumenba based on International Council for Harmonisation (ICH) Q8 (R2), Q9, Q10, and Q11 guidelines, which provide complementary guidance on pharmaceutical development, quality risk management, quality systems, and development and manufacture of drug substances, respectively. These guidelines ensure product quality using a scientific and risk-based approach. Trumenba contains two factor H binding proteins (FHbps), one from each of the two FHbp subfamilies (A and B), adsorbed onto aluminum phosphate. Trumenba manufacturing processes are complicated by the recombinant protein expression of Subfamily A and B proteins and the nature of the drug product (suspension in syringes); the latter also introduces challenges in controlling product critical quality attributes during the development process. In such complex systems, the control strategy is critical to ensuring consistent desired product quality; it also supports the regulatory requirement of continued improvement through continuous process verification and aids regulatory filing. This article describes Pfizer's approach toward robust control strategy development, built on product and process understanding, and links control strategy to regulatory document sections and flow of controls. Specifically, an approach is presented on product quality attribute criticality determination based on safety and efficacy and on an understanding of process parameter criticality. This was achieved by studying the impact of the approach on product quality attributes to define process parameter and in-process controls. This approach is further explained through Trumenba case studies, highlighting specific quality attributes and the associated controls implemented, and provides a holistic view of controls employed for both drug substance and drug product.

Glass is the favorite material for parenteral packaging because of its physico-chemical properties. Type I borosilicate glass is worldwide use at this scope, but it may have some issues related to breakage, corrosion and delamination that might compromise the drug quality, safety and efficacy. These issues can be mitigated and avoided starting from the appropriate selection of the most suitable raw material at the early stage of the glass container design. In this study, Type I borosilicate glass vials manufactured using two glass tubes having different chemical compositions, were studied and compared in terms of their resistance to corrosion. Testing design was applied with the aim to select the best practice approach comparing different storage simulation conditions: ageing treatment through autoclaving and stability testing (real-time and accelerated). Clear differences were found between the different glass types in terms of hydrolytic and corrosion resistance that highlighted the relation between chemical composition and glass chemical durability. Non-negligible differences were also observed using different storage conditions.

A vial-capping process for lyophilization stopper configurations was previously quantified using residual seal force (RSF). A correlation between RSF and container closure integrity (CCI) was established, and component positional offsets were identified to be the primary source of variability in RSF measurements.

To gain insight into the effects of stopper geometry on CCI, serum stoppers with the same rubber formulation were investigated in this study. Unlike lyophilization stoppers that passed CCI (per helium leak testing) even with RSF of 0 N owing to their excellent valve seal, serum stoppers consistently failed CCI when RSF was <15.8 N. When the plug was removed, both types of stoppers exhibited a comparable critical lower RSF limit (19–20 N), below which CCI could not be maintained. When CCI was retested at later time points (up to 6 mo), some previously failed vials passed CCI, suggesting that CCI improvement might be related to rubber relaxation (viscous flow), which can fill minor imperfections on the vial finish.

To confirm component positional offsets are the primary sources of RSF variability, a novel quantification tool—micro-computed tomography (micro-CT)—was used in this study. Micro-CT provided images for quantification of positional offsets of the cap and stopper that directly correlated with RSF fluctuations. Serum stoppers and lyophilization stoppers are comparable in RSF variations, although lyophilization stoppers are more robust in CCI. The use of micro-CT provides a nondestructive and innovative tool in quantitatively analyzing component features of capped vials that would otherwise be difficult to investigate.