Teaching advanced programming can be a challenge, especially when the students are pursuing different majors with diverse analytical and problem-solving capabilities. The purpose of this paper is to explore the efficacy of using a particular problem as a vehicle for imparting a broad set of programming concepts and problem-solving techniques. We present a classic brain teaser that is used to communicate and demonstrate advanced software development concepts and techniques. Our results show that students with varied academic experiences and goals, assuming at least one procedural/structured programming pre-requisite, can benefit from and also be challenged by such an exercise. Although this problem has been used by others in the classroom, we believe that our use of this problem in imparting such a broad range of topics to a diverse student population is unique.

Electronic portfolios (e-portfolios) have a positive impact on the learning process in a broad range of educational sectors and on learners of all ages. Yet because most e-portfolio-related studies are about their implementation in higher education, this type of research is less usual in the early childhood context, and there is no available research for Greek schools. This study aims to investigate the impact of e-portfolios on learning in a Greek primary school and to provide a resource regarding the educational benefits of e-portfolio in primary education. To do that, it employs the qualitative naturalistic method to collect data, along with mixed methods which were used to achieve triangulation and strengthen confidence in the outcomes. Participants in the research were fourteen 8-year-old pupils, and one of the researchers was their regular teacher. Data evaluation revealed that the e-portfolio added value in pupils’ learning, acted as a medium to involve parents, promoted pupils’ self-esteem, and was acknowledged as a valuable assessment tool and a challenge for the school community. Based on the experience of the e-portfolio implementation, the authors provide some suggestions that would possibly help researchers and primary school teachers adopt and develop e-portfolio systems in their particular settings.

This paper reports on the outcomes from a pilot study targeted at mothers of school children in Melbourne, Australia. The aim of the study was to engender a positive view of technology in the participants and to introduce the concept of Information Technology (IT) as a potential career. Mothers were given the opportunity to develop basic IT skills and learn about different IT career pathways for their children with an emphasis on their daughters’ choices. Mothers were offered an evening course over a four week period that was designed to introduce them to a range of social media and Web 2.0 tools. Their opinions were documented using both questionnaires and informal discussions. It explored whether their attitudes towards IT can be changed by up-skilling and introducing them to the technologies their children commonly use. The findings of the pilot study suggest that addressing this demographic has the potential to make the participants question their pre-conceptions about IT careers for women.

Prior work demonstrates the importance of introducing young children to programming and engineering content before gender stereotypes are fully developed and ingrained in later years. However, very little research on gender and early childhood technology interventions exist. This pilot study looks at N=45 children in kindergarten through second grade who completed an eight-week robotics and programming curriculum using the KIWI robotics kit. KIWI is a developmentally appropriate robotics construction set specifically designed for use with children ages 4 to 7 years old. Qualitative pre-interviews were administered to determine whether participating children had any gender-biased attitudes toward robotics and other engineering tools prior to using KIWI in their classrooms. Post-tests were administered upon completion of the curriculum to determine if any gender differences in achievement were present. Results showed that young children were beginning to form opinions about which technologies and tools would be better suited for boys and girls. While there were no significant differences between boys and girls on the robotics and simple programming tasks, boys performed significantly better than girls on the advanced programming tasks such as, using repeat loops with sensor parameters. Implications for the design of new technological tools and curriculum that are appealing to boys and girls are discussed.

Since the advent of the iPhone and rise of mobile technologies, educational apps represent one of the fastest growing markets, and both the mobile technology and educational app markets are predicted to continue experiencing growth into the foreseeable future. The irony, however, is that even with a booming market for educational apps, very little research regarding the quality of them has been conducted. Though some instruments have been developed to evaluate apps geared towards student learning, no such instrument has been created for teacher resource apps, which are designed to assist teachers in completing common tasks (e.g., taking attendance, communicating with parents, monitoring student learning and behavior, etc.). Moreover, when teachers visit the App Store or Google Play to learn about apps, the only ratings provided to them are generic, five-point evaluations, which do not provide qualifiers that explain why an app earned three, two, or five points. To address that gap, previously conducted research related to designing instructional technologies coupled with best practices for supporting teachers were first identified. That information was then used to construct a comprehensive rubric for assessing teacher re-source apps. In this article, a discussion that explains the need for such a rubric is offered before describing the process used to create it. The article then presents the rubric and discusses its different components and potential limitations and concludes with suggestions for future research based on the rubric.

Immigrant students face a multitude of problems, among which are poor social adaptation and school integration. On the other hand, although digital narrations are widely used in education, they are rarely used for aiding students or for the resolution of complex problems. This study exploits the potential of digital narrations towards this end, by examining how the development and presentation of an autobiographical digital narration can assist immigrant students in overcoming their adaptation difficulties. For that matter, a female student presenting substantial problems was selected as the study’s subject. Data was collected from all the participating parties (subject, teacher, classmates) using a variety of tools, before, during, and after the intervention. It was found that through the digital narration she was able to externalize her thoughts and feelings and this, in turn, helped her in achieving a smoother integration in the school environment. In addition, the attitudes and perceptions of the other students for their foreign classmate were positively influenced. The intervention was short in duration and it did not require special settings. Hence, it can be easily applied and educators can consider using similar interventions. On the other hand, further research is recommended to establish the generalizability of the study’s findings.

This paper examines how to leverage the design studio learning environment throughout long-term Digital Design education in order to support students to progress from tactical, well-defined, device-centric routine design, to confidently design sustainable solutions for strategic, complex, problems for a wide range of devices and platforms in the digital space. We present a framework derived from literature on design, creativity, and theories on learning that: (a) implements a theory of formal learning sequences as a user-centered design process in the studio; and (b) describes design challenge progressions in the design studio environment modeled in seven dimensions. The framework can be used as a tool for designing, evaluating, and communicating course progressions within – and between series of – design studio courses. This approach is evaluated by implementing a formal learning sequence framework in a series of design studio courses that progress in an undergraduate design-oriented Informatics program. Reflections from students, teachers, and external clients indicate high student motivation and learning goal achievement, high teacher satisfaction and skill development, and high satisfaction among external clients.

The pilot research presented here explores the classroom use of Emerging Literacy in Mathematics (ELM) software, a research-based bilingual interactive multimedia instructional tool, and its potential to develop emerging numeracy skills. At the time of the study, a central theme of early mathematics curricula, Number Concept, was fully developed. It was broken down into five mathematical concepts including counting, comparing, adding, subtracting and decomposing. Each of these was further subdivided yielding 22 online activities, each building in a level of complexity and abstraction. In total, 234 grade one students from 12 classes participated in the two-group post-test study that lasted about seven weeks and for which students in the experimental group used ELM for about 30 minutes weekly. The results for the final sample of 186 students showed that ELM students scored higher on the standardized math test (Canadian Achievement Test, 2008) and reported less boredom and lower anxiety as measured on the Academic Emotions Questionnaire than their peers in the control group. This short duration pilot study of one ELM theme holds great promise for ELM’s continued development.

Aim/Purpose: To examine the early perceptions (acceptability) and usability of EASEL (Education through Application-Supported Experiential Learning), a mobile platform that delivers reflection prompts and content before, during, and after an experiential learning activity. Background: Experiential learning is an active learning approach in which students learn by doing and by reflecting on the experience. This approach to teaching is often used in disciplines such as humanities, business, and medicine. Reflection before, during, and after an experience allows the student to analyze what they learn and why it is important, which is vital in helping them to understand the relevance of the experience. A just-in-time tool (EASEL) was needed to facilitate this. Methodology: To inform the development of a mobile application that facilitates real-time guided reflection and to determine the relevant feature set, we conducted a needs analysis with both students and faculty members. Data collected during this stage of the evaluation helped guide the creation of a prototype. The user experience of the prototype and interface interactions were evaluated during the usability phase of the evaluation study. Contribution: Both the needs analysis and usability assessment provided justification for continued development of EASEL as well as insight that guides current development. Findings: The interaction design of EASEL is understandable and usable. Both students and teachers value an application that facilitates real-time guided reflection. Recommendations for Practitioners: The use of a system such as EASEL can leverage time and location-based services to support students in field experiences. This technology aligns with evidence that guided reflection provides opportunities for metacognition. Recommendation for Researchers: Iterative prototyping, testing, and refinement can lead to a deliberate and effective app development process. Impact on Society: The EASEL platform leverages inherent functionality of mobile devices, such as GPS and persistent network connectivity, to adapt reflection tasks based on lo-cation or time. Students using EASEL will engage in guided reflection, which leads to metacognition and can help instructors scaffold learning Future Research: We will continue to advance the application through iterative testing and development. When ready, the application will be vetted in larger studies across varied disciplines and contexts.

Aim/Purpose: Over the past few years, new approaches to introducing young children to computational thinking have grown in popularity. This paper examines the role that user interfaces have on children’s mastery of computational thinking concepts and positive interpersonal behaviors. Background: There is a growing pressure to begin teaching computational thinking at a young age. This study explores the affordances of two very different programming interfaces for teaching computational thinking: a graphical coding application on the iPad (ScratchJr) and tangible programmable robotics kit (KIBO). Methodology : This study used a mixed-method approach to explore the learning experiences that young children have with tangible and graphical coding interfaces. A sample of children ages four to seven (N = 28) participated. Findings: Results suggest that type of user interface does have an impact on children’s learning, but is only one of many factors that affect positive academic and socio-emotional experiences. Tangible and graphical interfaces each have qualities that foster different types of learning

Aim/Purpose: Electronic examinations have some inherent problems. Students have expressed negative opinions about electronic examinations (e-examinations) due to a fear of, or unfamiliarity with, the technology of assessment, and a lack of knowledge about the methods of e-examinations. Background: Electronic examinations are now a viable alternative method of assessing student learning. They provide freedom of choice, in terms of the location of the examination, and can provide immediate feedback; students and institutions can be assured of the integrity of knowledge testing. This in turn motivates students to strive for deeper learning and better results, in a higher quality and more rigorous educational process. Methodology : This paper compares an e-examination system at FUT Minna Nigeria with one in Australia, at the University of Tasmania, using case study analysis. The functions supported, or inhibited, by each of the two e-examination systems, with different approaches to question types, cohort size, technology used, and security features, are compared. Contribution: The researchers’ aim is to assist stakeholders (including lecturers, invigilators, candidates, computer instructors, and server operators) to identify ways of improving the process. The relative convenience for students, administrators, and lecturer/assessors and the reliability and security of the two systems are considered. Challenges in conducting e-examinations in both countries are revealed by juxtaposing the systems. The authors propose ways of developing more effective e-examination systems. Findings: The comparison of the two institutions in Nigeria and Australia shows e-examinations have been implemented for the purpose of selecting students for university courses, and for their assessment once enrolled. In Nigeria, there is widespread systemic adoption for university entrance merit selection. In Australia this has been limited to one subject in one state, rather than being adopted nationally. Within undergraduate courses, the Nigerian scenario is quite extensive; in Australia this adoption has been slower, but has penetrated a wide variety of disciplines. Recommendations for Practitioners: Assessment integrity and equipment reliability were common issues across the two case studies, although the delivery of e-examinations is different in each country. As with any procedural process, a particular solution is only as good as its weakest attribute. Technical differences highlight the link between e-examination system approaches and pedagogical implications. It is clear that social, cultural, and environmental factors affect the success of e-examinations. For example, an interrupted electrical power supply and limited technical know-how are two of the challenges affecting the conduct of e-examinations in Nigeria. In Tasmania, the challenge with the “bring your own device” (BYOD) is to make the system operate on an increasing variety of user equipment, including tablets. Recommendation for Researchers: The comparisons between the two universities indicate there will be a productive convergence of the approaches in future. One key proposal, which arose from the analysis of the existing e-examination systems in Nigeria and Australia, is to design a form of “live” operating system that is deployable over the Internet. This method would use public key cryptography for lecturers to encrypt their questions online. Impact on Society : If institutions are to transition to e-examinations, one way of facilitating this move is by using computers to imitate other assessment techniques. However, higher order thinking is usually demonstrated through open-ended or creative tasks. In this respect the Australian system shows promise by providing the same full operating system and software application suite to all candidates, thereby supporting assessment of such creative higher order thinking. The two cases illustrate the potential tension between “online” or networked reticulation of questions and answers, as opposed to “offline” methods. Future Research: A future design proposition is a web-based strategy for a virtual machine, which is launched into candidates’ computers at the start of each e-examination. The new system is a form of BYOD externally booted e-examination (as in Australia) that is deployable over the Internet with encryption and decryption features using public key cryptography (Nigeria). This will allow lecturers to encrypt their questions and post them online while the questions are decrypted by the administrator or students are given the key. The system will support both objective and open-ended questions (possibly essays and creative design tasks). The authors believe this can re-define e-examinations as the “gold standard” of assessment.

Aim/Purpose: The present study investigated and compared students’ attention in terms of time-on-task and number of distractors between using a touchscreen and a pen tablet in mathematical problem-solving activities with virtual manipulatives. Background: Although there is an increasing use of these input devices in educational practice, little research has focused on assessing student attention while using touchscreens or pen tablets in a mathematics classroom. Methodology: A qualitative exploration was conducted in a public elementary school in New Taipei, Taiwan. Six fifth-grade students participated in the activities. Video recordings of the activities and the students’ actions were analyzed. Findings: The results showed that students in the activity using touchscreens maintained greater attention and, thus, had more time-on-task and fewer distractors than those in the activity using pen tablets. Recommendations for Practitioners: School teachers could employ touchscreens in mathematics classrooms to support activities that focus on students’ manipulations in relation to the attention paid to the learning content. Recommendation for Researchers: The findings enhance our understanding of the input devices used in educational practice and provide a basis for further research. Impact on Society: The findings may also shed light on the human-technology interaction process involved in using pen and touch technology conditions. Future Research: Activities similar to those reported here should be conducted using more participants. In addition, it is important to understand how students with different levels of mathematics achievement use the devices in the activities.

Aim/Purpose: To prepare students with both theoretical knowledge and practical skills in the field of wireless communications. Background: Teaching wireless communications and networking is not an easy task because it involves broad subjects and abstract content. Methodology: A pedagogical method that combined lectures, labs, assignments, exams, and readings was applied in a course of wireless communications. Contribution: Five wireless networking labs, related to wireless local networks, wireless security, and wireless sensor networks, were developed for students to complete all of the required hands-on lab activities. Findings: Both development and implementation of the labs achieved a successful outcome and provided students with a very effective learning experience. Students expressed that they had a better understanding of different wireless network technologies after finishing the labs. Recommendations for Practitioners: Detailed instructional lab manuals should be developed so that students can carry out hands-on activities in a step-by-step fashion. Recommendation for Researchers: Hands-on lab exercises can not only help students understand the abstract technical terms in a meaningful way, but also provide them with hands-on learning experience in terms of wireless network configuration, implementation, and evaluation. Impact on Society: With the help of a wireless network simulator, students have successfully enhanced their practical skills and it would benefit them should they decide to pursue a career in wireless network design or implementation. Future Research: Continuous revision of the labs will be made according to the feedback from students. Based on the experience, more wireless networking labs and network issues could be studied in the future.

Aim/Purpose: This paper presents the findings of an Activity-Oriented Teaching Strategy (AOTS) conducted for a postgraduate level Software Engineering (SE) course with the aim of imparting meaningful software development experience for the students. The research question is framed as whether the activity-oriented teaching strategy helps students to acquire practical knowledge of Software Engineering and thus bridge the gap between academia and software industry. Background: Software Engineering Education (SEE) in India is mainly focused on teaching theoretical concepts rather than emphasizing on practical knowledge in software development process. It has been noticed that many students of CS/IT background are struggling when they start their career in the software industry due to inadequate familiarity with the software development process. In the current context of SE education, there is a knowledge gap between the theory learned in the classroom and the actual requirement demanded by the software industry. Methodology: The methodology opted for in this study was action research since the teachers are trying to solve the practical problems and deficiencies encountered while teaching SE. There are four pedagogies in AOTS for fulfilling the requirements of the desired teaching strategy. They are flipped classroom, project role-play for developing project artifacts, teaching by example, and student seminars. The study was conducted among a set of Postgraduate students of the Software Engineering programme at Cochin University of Science and Technology, India. Contribution: AOTS can fulfil both academic and industrial requirements by actively engaging the students in the learning process and thus helping them develop their professional skills. Findings: AOTS can be molded as a promising teaching strategy for learning Software Engineering. It focuses on the essential skill sets demanded by the software industry such as communication, problem-solving, teamwork, and understanding of the software development processes. Impact on Society: Activity-oriented teaching strategies can fulfil both academic and industrial requirements by actively engaging the students in the SE learning process and thus helping them in developing their professional skills. Future Research: AOTS can be refined by adding/modifying pedagogies and including different features like an online evaluation system, virtual classroom etc.

Aim/Purpose: This paper describes the context, development, implementation, and the potential transferability of an integrated online research environment that allows its users to conduct all aspects of research online. Background: While the content of most traditional courses can be delivered online and learning outcomes can be achieved by adopting equivalents to face-to-face pedagogic approaches, certain courses, such as those that require a substantial research component, present significant constraints for delivery online. To overcome these limitations, Australia’s largest university developed and implemented a Research Portal. Methodology: The development team conducted a functional requirements analysis, identified the components that would be necessary to meet user needs, and reviewed existing solutions. The Monash University Psychology Research Portal was designed, tested, developed, tested for user experience, implemented, and reviewed. The Research Portal is structured according to the usual research sequence and provides users with access to supporting information and integrated capacities including research supervision, participant acquisition, and data collection, analysis, and storage. Contribution: This integrated online research environment is equivalent to and, in some ways, superior to an on campus/non-online research capacity. Findings: The usage of the Research Portal has grown rapidly and has satisfied the requirements and met the research needs of students of an online course that includes a research project, providing a common, ubiquitously accessible, and integrated online research environment. Recommendations for Practitioners: Further refinement, personalization, and expanded implementation and dissemination of the Research Portal components are required. The formation of networks and working partnerships to operate, maintain, and promote Research Portal initiatives is recommended to reduce operational costs, increase access, and create an impact. Impact on Society: The Research Portal is an efficient resource that provides easy access to a standard interface at any time and from anywhere and can potentially be used by other online research courses, as well as by online and non-online researchers.

Aim/Purpose: This study was aimed at enhancing students’ learning of software engineering methods. A collaboration between the Computer Science, Business Management, and Product Design programs was formed to work on actual projects with real clients. This interdisciplinary form of collaboration simulates the realities of a diverse Software Engineering team. Background: A collaborative approach implemented through projects has been the established pedagogy for introducing the Software Engineering course to undergraduate Computer Science students. The collaboration, however, is limited to collaboration among Computer Science students and their clients. This case study explored an enhancement to the collaborative approach to project development by integrating other related disciplines into the project development framework; hence, the Interdisciplinary Approach. Methodology: This study adopted the case method approach. An interdisciplinary service innovation activity was proposed to invite other disciplines in the learning process of the computer science students. The agile methodology Scrum was used as the software development approach during project development. Survey data were collected from the students to establish (a) their perception of the interdisciplinary approach to project development; (b) the factors that influenced success or failure of their team to deliver the project; and (c) the perceived skills or knowledge that they acquired from the interdisciplinary approach. Analysis of data followed a mixed method approach. Contribution: The study improved the current pedagogy for Software Engineering education by integrating other related disciplines into the software project development framework. Findings: Data collected showed that the students generally accepted the interdisciplinary approach to project development. Factors such as project relevance, teamwork, time and schedule, and administration support, among others, affect team performance towards project completion. In the case of the Computer Science students, results show that students have learned skills during the experience that, as literature reveal, can only be acquired or mastered in their future profession as software engineers. Recommendations for Practitioners: The active collaboration of the industry with the University and the involvement of the other related courses in teaching software engineering methods are critical to the development of the students, not only in learning the methodology but also as a working professional. Recommendation for Researchers: It is interesting to know and eventually understand the interactions between interdisciplinary team members in the conduct of Software Engineering practices while working on their projects. More specifically, what creative tensions arise and how do the interdisciplinary teams handle the discourse? Impact on Society: This study bridges the gap between how Software Engineering is taught in the university and how Software Engineering teams work in real life. Future Research: Future research is targeted at refining and elaborating the elements of the interdisciplinary framework presented in this paper towards an integrated course module for Software Engineering education.

Aim/Purpose: The dynamic nature of the information systems (IS) field presents educators with the perpetual challenge of keeping course offerings current and relevant. This paper describes the process at a College of Business (COB) to redesign the introductory IS course to better prepare students for advanced business classes and equip them with interdisciplinary knowledge and skills demanded in today’s workplace. Background: The course was previously in the Computer Science (CSC) Department, itself within the COB. However, an administrative restructuring resulted in the CSC department’s removal from the COB and left the core course in limbo. Methodology: This paper presents a case study using focus groups with students, faculty, and advisory council members to assess the value of the traditional introductory course. A survey was distributed to students after implementation of the newly developed course to assess the reception of the course. Contribution: This paper provides an outline of the decision-making process leading to the course redesign of the introductory IS course, including the context and the process of a new course development. Practical suggestions for implementing and teaching an introductory IS course in a business school are given. Findings: Focus group assessment revealed that stakeholders rated the existing introductory IS course of minimal value as students progressed through the COB program, and even less upon entering the workforce. The findings indicated a complete overhaul of the course was required. Recommendations for Practitioners: The subject of technology sometimes requires more than a simple update to the curriculum. When signs point to the need for a complete overhaul, this paper gives practical guidance supplemented with relevant literature for other academicians to follow. Recommendation for Researchers: Students are faced with increasing pressure to be proficient with the latest technology, in both the classroom where educators are trying to prepare them for the modern workplace, as well as the organization which faces an even greater pressure to leverage the latest technology. The newly designed introductory IS course provides students, and eventually organizations, a better measure of this proficiency. Future Research: Future research on the efficacy of this new course design should include longitudinal data to determine the impact on graduates, and eventually the assessment of those graduates’ performance in the workplace.

Aim/Purpose: Bioengineering is a burgeoning interdisciplinary learning domain that could inspire the imaginations of elementary aged children but is not traditionally taught to this age group for reasons unrelated to student ability. This pilot study presents the BacToMars videogame and accompanying curricular intervention, designed to introduce children (aged 7-11) to foundational concepts of bioengineering and to the interdisciplinary nature of scientific endeavors. Background: This pilot study explores the bioengineering-related learning outcomes and attitudes of children after engaging with the BacToMars game and curriculum intervention. Methodology: This study drew on prior findings in game-based learning and applied them to a videogame designed to connect microbiology with Constructionist microworlds. An experimental comparison showed the learning and engagement affordances of integrating this videogame into a mixed-media bioengineering curriculum. Elementary-aged children (N = 17) participated in a 9-hour learning intervention, with one group of n = 8 children receiving the BacToMars videogame and the other group (n = 9) receiving traditional learning activities on the same content. Pre- and post-surveys and interview data were collected from both groups. Contribution: This paper contributes to education research on children’s ability to meaningfully engage with abstract concepts at the intersection of science and engineering through bioengineering education, and to design research on developing educational technology for introducing bioengineering content to elementary school children. Findings: Children in both groups showed improved knowledge and attitudes related to bioengineering. Children who used BacToMars showed slightly stronger performance on game-specific concepts, while children in the control condition showed slightly higher generalized knowledge of bioengineering concepts. Recommendations for Practitioners: Practitioners should consider bioengineering as a domain for meaningful, interdisciplinary learning in elementary education.. Recommendation for Researchers: Design researchers should develop playful ways to introduce bioengineering concepts accurately and to engage children’s imaginations and problem-solving skills. Education researchers should further investigate developmentally appropriate ways to introduce bioengineering in elementary education. Impact on Society: BacToMars introduces a meaningful scenario to contextualize complex con-cepts at the intersection of science and engineering, and to engage children in real-world, interdisciplinary problem solving. Future Research: Future research should explore BacToMars and bioengineering curricula for elementary-aged children in larger samples, with longer intervention times.

Aim/Purpose: The aim of this article is to develop a tool to detect plagiarism in real time amongst students being evaluated for learning in a computer-based assessment setting. Background: Cheating or copying all or part of source code of a program is a serious concern to academic institutions. Many academic institutions apply a combination of policy driven and plagiarism detection approaches. These mechanisms are either proactive or reactive and focus on identifying, catching, and punishing those found to have cheated or plagiarized. To be more effective against plagiarism, mechanisms that detect cheating or colluding in real-time are desirable. Methodology: In the development of a tool for real-time plagiarism prevention, literature review and prototyping was used. The prototype was implemented in Delphi programming language using Indy components. Contribution: A real-time plagiarism detection tool suitable for use in a computer-based assessment setting is developed. This tool can be used to complement other existing mechanisms. Findings: The developed tool was tested in an environment with 55 personal computers and found to be effective in detecting unauthorized access to internet, intranet, and USB ports on the personal computers. Recommendations for Practitioners: The developed tool is suitable for use in any environment where computer-based evaluation may be conducted. Recommendation for Researchers: This work provides a set of criteria for developing a real-time plagiarism prevention tool for use in a computer-based assessment. Impact on Society: The developed tool prevents academic dishonesty during an assessment process, consequently, inculcating confidence in the assessment processes and respectability of the education system in the society. Future Research: As future work, we propose a comparison between our tool and other such tools for its performance and its features. In addition, we want to extend our work to include testing for scalability of the tool to larger settings.

Aim/Purpose: This paper presents a data mining approach for analyzing responses to advanced declarative programming questions. The goal of this research is to find a model that can explain the results obtained by students when they perform exams with Constructed Response questions and with equivalent Multiple-Choice Questions. Background: The assessment of acquired knowledge is a fundamental role in the teaching-learning process. It helps to identify the factors that can contribute to the teacher in the developing of pedagogical methods and evaluation tools and it also contributes to the self-regulation process of learning. However, better format of questions to assess declarative programming knowledge is still a subject of ongoing debate. While some research advocates the use of constructed responses, others emphasize the potential of multiple-choice questions. Methodology: A sensitivity analysis was applied to extract useful knowledge from the relevance of the characteristics (i.e., the input variables) used for the data mining process to compute the score. Contribution: Such knowledge helps the teachers to decide which format they must consider with respect to the objectives and expected students results. Findings: The results shown a set of factors that influence the discrepancy between answers in both formats. Recommendations for Practitioners: Teachers can make an informed decision about whether to choose multiple-choice questions or constructed-response taking into account the results of this study. Recommendation for Researchers: In this study a block of exams with CR questions is verified to complement the area of learning, returning greater performance in the evaluation of students and improving the teaching-learning process. Impact on Society: The results of this research confirm the findings of several other researchers that the use of ICT and the application of MCQ is an added value in the evaluation process. In most cases the student is more likely to succeed with MCQ, however if the teacher prefers to evaluate with CR other research approaches are needed. Future Research: Future research must include other question formats.

Aim/Purpose: The main aim of this study was modeling a collaborative process for knowledge visualization, via the creation of infographics. Background: As an effective method for visualizing complex information, creating infographics requires learners to generate and cultivate a deep knowledge of content and enables them to concisely visualize and share this knowledge. This study investigates creating infographics as a knowledge visualization process for collaborative learning situations by integrating the infographic design model into the team-based and technology-mediated Bridge21 learning model. Methodology: This study was carried out using an educational design perspective by conducting three main cycles comprised of three micro cycles: analysis and exploration; design and construction; evaluation and reflection. The process and the scaffolding were developed and enhanced from cycle to cycle based on both qualitative and quantitative methods by using the infographic design rubric and researcher observations acquired during implementation. Respectively, twenty-three, twenty-four, and twenty-four secondary school students participated in the infographic creation process cycles. Contribution: This research proposes an extensive step-by-step process model for creating infographics as a method of visualization for learning. It is particularly relevant for working with complex information, in that it enables collaborative knowledge construction and sharing of condensed knowledge. Findings: Creating infographics can be an effective method for collaborative learning situations by enabling knowledge construction, visualization and sharing. The Bridge21 activity model constituted the spine of the infographic creation process. The content generation, draft generation, and visual and digital design generation components of the infographic design model matched with the investigate, plan and create phases of the Bridge21 activity model respectively. Improvements on infographic design results from cycle to cycle suggest that the revisions on the process model succeeded in their aims. The rise in each category was found to be significant, but the advance in visual design generation was particularly large. Recommendations for Practitioners: The effectiveness of the creation process and the quality of the results can be boosted by using relevant activities based on learner prior knowledge and skills. While infographic creation can lead to a focus on visual elements, the importance of wording must be emphasized. Being a multidimensional process, groups need guidance to ensure effective collaboration. Recommendation for Researchers: The proposed collaborative infographic creation process could be structured and evaluated for online learning environments, which will improve interaction and achievement by enhancing collaborative knowledge creation. Impact on Society: In order to be knowledge constructors, innovative designers, creative communicators and global collaborators, learners need to be surrounded by adequate learning environments. The infographic creation process offers them a multidimensional learning situation. They must understand the problem, find an effective way to collect information, investigate their data, develop creative and innovative perspectives for visual design and be comfortable for using digital creation tools. Future Research: The infographic creation process could be investigated in terms of required learner prior knowledge and skills, and could be enhanced by developing pre-practices and scaffolding.

Aim/Purpose: The current study examines the impact of an intervention program to train teachers to collaborate with their students while creating digital games. Background: Teachers seem unable to leverage the potential of ICT to present students with a rich learning environment. ICT integration is usually at a relatively simple and concrete level without changing the traditional teacher-student paradigm. Methodology: The study is both quantitative and qualitative. Participants were 63 active teachers studying in the M.Ed. program at a teacher education college. The teachers responded to a series of pre- and post-questionnaires and wrote a concluding reflection. Contribution: Teaching based on creating digital games, combined with teacher-class collaboration, is a viable and real alternative of constructivist teaching, adapted to different learners. Findings: The SEM path analysis showed that it was only after the intervention that the lower the teachers’ resistance to changing teaching patterns, the higher their intrinsic motivation to learn an innovative pedagogical-technological program and likewise the sense of mastery of 21st-century skills, resulting in a positive attitude towards classroom collaboration. The qualitative findings reveal eight categories dealing with two main themes: the first is professional development, including conceptual, behavioral and emotional change, and the second is the teachers’ perception of the learners. Recommendations for Practitioners: Teacher training should be ongoing in order to change teaching-learning processes and promote an active approach based on constructive principles, 21st-century skills and collaboration between teachers and students in a computer environment. Recommendation for Researchers: Future studies should start by sampling teachers and education professionals who have convenient access to technology in their teaching-learning environment. Impact on Society: Collaboration between teachers and students in creating learning games in a computer environment and teacher-class collaboration, in general, require very different training than that which exists today. Hence there should be some rethinking of teacher training. The proposed pedagogical model is one such idea in the right direction. Future Research: A larger study with a greater number of participants, including a control group, should be conducted.

Aim/Purpose: This paper presents a study about changes in computer science and software engineering students’ perceptions of their soft skills during their progress through the Computer Science Soft Skills course. Background: Soft skills are often associated with a person’s social, emotional and cognitive capabilities. Soft skills are increasingly sought out and are well recognized by employers alongside standard qualifications. Therefore, high importance is attributed to soft skills in computer science and software engineering education. Methodology: Content analysis was applied to interpret, categorize and code statements from students’ course assignment answers. Data analysis was performed gradually at the three main stages of the course and by the two students’ study populations. Contribution: The paper highlights the variety of (a) soft skills that can be learnt in one course, both on the individual level and on the team level and (b) assignments that can be given to students to increase their awareness and motivation to practice and learn soft skills. Findings: Data analysis revealed the following: (a) five individual soft skills categories, with 95 skills, and five team-related soft skills categories, with 52 skills (in total, the students mentioned 147 soft skills); (b) course assignments and particularly team-based activities elicited student awareness of their individual soft skills, both as strengths and weaknesses; (c) students developed their reflection skills, particularly with respect to team-related soft skills; and (d) significant differences exist between the two groups of students in several categories. Recommendations for Practitioners: It is important to provide undergraduate students with opportunities to integrate soft skills during their training. Establishing a meaningful learning process, such as project-based learning, enables students to apply and develop soft skills when accompanied by reflective thought processes. Recommendation for Researchers: A similar course can be taught and be accompanied by similar analysis of students’ learning outcomes, to examine the influence of local culture on the characteristics of soft skills. Impact on Society: Increased awareness of soft skills in scientists and engineers’ undergraduate education. University graduates who will strengthen their variety of soft skills in their academic training process and will be more meaningful employees in the workplace and in society. Future Research: Our future research aims (a) to explore additional innovative ways to increase students’ learning processes, awareness and practices in relation to soft skills and (b) to research how students’ soft skills are developed during the entire undergraduate studies both on the individual level and the team level.

Aim/Purpose: The purpose of this study is to develop an efficient methodology that can assist the evaluators in assessing a variable number of individuals that are working in groups and guarantee that the assessment is dependent on the group members’ performance and contribution to the work developed. Background: Collaborative work has been gaining more popularity in academic settings. However, group assessment needs to be performed according to each individual’s performance. The problem rests on the need to distinguish each member of the group in order to provide fair and unbiased assessments. Methodology: Design Science Research methodology supported the design of a framework able to provide the evaluator with the means to distinguish individuals in a workgroup and deliver fair results. Hevner’s DSR guidelines were fulfilled in order to describe WebAVALIA. To evaluate the framework, a quantitative study was performed and the first results are presented. Contribution: This paper provides a methodological solution regarding a fair evaluation of collaborative work through a tool that allows its users to perform their own assessment and peer assessment. These are made accordingly to the user’s perspectives on the performance of each group member throughout the work development. Findings: The first analysis of the results indicates that the developed method provides fairness in the assessment of group members, delivering a distinction amongst individuals. Therefore, each group member obtains a mark that corresponds to their specific contribution to the workgroup. Recommendations for Practitioners: For those who intend to apply this workgroup assessment method, it is relevant to raise student awareness about the methodology that is going to be used. That is, all the functionalities and steps in WebAVALIA have to be thoroughly explained before beginning of the project. Then, the evaluators have to decide about the students’ intermediate voting, namely if the evaluator chooses or not to publish student results throughout the project’s development. If there is the decision to display these intermediate results, the evaluator must try to encourage collaboration among workgroup members, instead of competition. Recommendation for Researchers: This study explores the design and development of an e-assessment tool – WebAVALIA. In order to assess its feasibility, its use in other institutions or contexts is recommended. The gathering of user opinions is suggested as well. It would then be interesting to compare the findings of this study with the results from other experimentations Impact on Society: Sometimes, people develop a rejection of collaborative work because they feel exploited due to the biased evaluation results. However, the group members assessment distinction, according to each one’s performance, may give each individual a sense of fairness and reward, leading to an openness/willingness towards collaborative work. Future Research: As future work, there are plans to implement the method in other group assessment contexts – such as sports and business environments, other higher education institutions, technical training students – in other cultures and countries. From this myriad of contexts, satisfaction results would be compared. Other future plans are to further explore the mathematical formulations and the respective WebAVALIA supporting algorithms.

Aim/Purpose: This study reports the outcome of how a first pilot semester introductory programming course was designed to provide tangible evidence in support of the concept of Student Ownership of Learning (SOL) and how the outcomes of this programming course facilitate effective student learning. Background: Many instructors want to create or redesign their courses to strengthen the relationship between teaching and learning; however, the researchers of this study believe that the concept of Student Ownership of Learning (SOL) connects to student engagement and achievement in the classroom setting. The researchers redesigned the introductory programming course to include valuable teaching methods to increase Student Ownership of Learning and constructive approaches such as making students design an authentic mobile app project as individuals, partners, or within teams. The high quality of students’ projects positioned them as consultants to the university IT department. Methodology: This paper employs a case study design to construct a qualitative research method as it relates to the phenomenon of the study’s goals and lived experiences of students in the redesigned introductory programming course. The redesigned course was marketed to students as a new course with detailed description and elements that were different from the traditional computer science introductory programming course requirement. The redesigned introductory programming course was offered in two sections: one section with 14 registered students and the other section with 15 registered students. One faculty member instructed both sections of the course. A total of 29 students signed up for the newly redesigned introductory programming course, more than in previous semesters, but two students dropped out within the first two weeks of the redesigned course making a total of 27 students. The redesigned coursework was divided into two parts of the semester. The first part of the semester detailed description and elements of the coursework including a redesigned approach with preparation for class, a quiz, and doing homework in class, which gives students control of decisions whenever possible; and working with each other, either with a partner or in a team. The second part of the semester focuses on students designing a non-trivial working mobile app and presenting their developing mobile app at a significant public competition at the end of the semester. Students developed significantly complex mobile apps and incorporated more complex functionality in their apps. Both Management Information System (MIS) major students and Computer Science major students were in the same course despite the fact that MIS students had never taken a programming course before; however, the Computer Science students had taken at least one course of programming. Contribution: This study provides a practical guide for faculty members in Information Technology programs and other faculty members in non-Computer Science programs to create or redesign an introductory course that increases student engagement and achievement in the classroom based on the concept of Student Ownership of Learning (SOL). This study also deepens the discussion in curriculum and instruction on the value to explore issues that departments or programs should consider when establishing coursework or academic programs. Findings: This study found two goals evidently in support to increase Student Ownership of Learning (SOL). The first goal (Increase their ownership of learning SOL) showed that students found value in the course contents and took control of their learning; therefore, the faculty no longer had to point out how important different programming concepts were. The students recognized their own learning gap and were excited when shown a programming concept that addressed the gap. For example, student comments were met with “boy, we can really use this in our app” instead of comments about how complex they were. The coursework produced a desired outcome for students as they would get the knowledge needed to make the best app that they could. The second goal (Develop a positive attitude toward the course) showed positive results as students developed a more positive attitude towards the course. Student actions in the classroom strongly reflected a positive attitude. Attendance was almost 100% during the semester even though no points for attendance were given. Further evidence of Student Ownership of Learning and self-identity was students’ extensive use of the terminology and concept of the course when talking to others, especially during the public competition. Students were also incorporating their learning into their identities. For example, teams became known by their app such as the Game team, the Recipe team, and the Parking team. One team even made team t-shirts. Another exciting reflection of the Student Ownership of Learning which occurred was the learning students did by themselves. Recommendations for Practitioners: Practitioners can share best practices with faculty in different departments, programs, universities, and educational consultants to cultivate the best solution for Student Ownership of Learning based on student engagement and achievement in the classroom setting. Recommendation for Researchers: Researchers can explore different perspectives with scholars and practitioners in various disciplinary fields of study to create or redesign courses and programs to reflect Student Ownership of Learning (SOL). Impact on Society: Student Ownership of Learning is relevant for faculty and universities to incorporate in the creation or redesigning of coursework in academic programs. Readers can gain an understanding that student engagement and achievement are two important drivers of Student Ownership of Learning (SOL) in the classroom setting. Future Research: Practitioners and researchers could follow-up in the future with a study to provide more understanding and updated research information from different research samples and hypotheses on Student Ownership of Learning (SOL).

Aim/Purpose: Multi-threaded software design is considered to be difficult, especially to novice programmers. In this study, we explored how students cope with a task that its solution requires a multi-threaded architecture to achieve optimal runtime. Background: An efficient exploit of multicore processors architecture requires computer programs that use parallel programming techniques. However, parallel programming is difficult to understand and apply by novice programmers. Methodology: The students had to address a two-stage problem: (1) design an optimal runtime solution to a given problem with no additional instructions; and (2) provide an optimal runtime multi-threaded design to the same problem. Interviews were conducted with a representative group of students to understand the underlying causes of their provided designs. We used qualitative research methods to gain refined insights regarding the students’ decision making during the design process. To analyze the gained data, we used content analysis tools. Contribution: The case study presented in this paper will help the teacher to stress the merits and limitations of various parallel architectures and confront students with the consequences of their solutions via performances’ benchmark. Findings: Analysis of the student’s solutions to the first stage revealed that the majority of them did not provide a multi-threaded solution ignoring the optimal runtime requirement. At the second stage, seven various architectures were provided differing in the number of involved threads, the data structures used, and the synchronization mechanism employed. The majority of the solutions were sub-optimal and only a few students provided an optimal one. Recommendations for Practitioners: We recommend conducting class discussions that will follow a task similar to the one used in this study. Recommendation for Researchers: To be able to generalize the received results this research should be repeated with larger study participant groups from various academic institutions. Impact on Society: Understanding the difficulties of novice programmers may lead to quality software systems. Future Research: To be able to generalize the received results this research should be repeated with larger study participant groups from various academic institutions.