Neutralizing antibodies specific for respiratory syncytial virus (RSV) represent a major protective mechanism against RSV infection, as demonstrated by the efficacy of the immune-prophylactic monoclonal antibody palivizumab in preventing RSV-associated lower respiratory tract infections in premature infants. Accordingly, the RSV neutralization assay has become a key functional method to assess the neutralizing activity of serum antibodies in preclinical animal models, epidemiology studies, and clinical trials. In this study, we qualified a 24-h, fluorescent focus-based microneutralization (RSVA FFA-MN) method that requires no medium exchange or pre- or postinfection processing to detect green fluorescent protein-expressing RSV strain A2 (RSVA-GFP)-infected cells, using a high-content imaging system for automated image acquisition and focus enumeration. The RSVA FFA-MN method was shown to be sensitive, with a limit of detection (LOD) and limit of quantitation (LOQ) of 1:10, or 3.32 log₂; linear over a range of 4.27 to 9.65 log₂ 50% inhibitory concentration (IC₅₀); and precise, with intra- and interassay coefficients of variation of <21%. This precision allowed the choice of a statistically justified 3-fold-rise seroresponse cutoff criterion. The repeatability and robustness of this method were demonstrated by including a pooled human serum sample in every assay as a positive control (PC). Over 3 years of testing between two laboratories, this PC generated data falling within 2.5 standard deviations of the mean 98.7% of the time (n = 1,720). This high-throughput and reliable RSV microneutralization assay has proven useful for testing sera from preclinical vaccine candidate evaluation studies, epidemiology studies, and both pediatric and adult vaccine clinical trials.

We have been exploring the use of the live attenuated Salmonella enterica serovar Typhi Ty21a vaccine strain as a versatile oral vaccine vector for the expression and delivery of multiple foreign antigens, including Shigella O-antigens. In this study, we separately cloned genes necessary for the biosynthesis of the Shigella flexneri serotype 2a and 3a O-antigens, which have been shown to provide broad cross-protection to multiple disease-predominant S. flexneri serotypes. The cloned S. flexneri 2a rfb operon, along with bgt and gtrII, contained on the SfII bacteriophage, was sufficient in Ty21a to express the heterologous S. flexneri 2a O-antigen containing the 3,4 antigenic determinants. Further, this rfb operon, along with gtrA, gtrB, and gtrX contained on the Sfx bacteriophage and oac contained on the Sf6 bacteriophage, was sufficient to express S. flexneri 3a O-antigen containing the 6, 7, and 8 antigenic determinants. Ty21a, with these plasmid-carried or chromosomally inserted genes, demonstrated simultaneous and stable expression of homologous S. Typhi O-antigen plus the heterologous S. flexneri O-antigen. Candidate Ty21a vaccine strains expressing heterologous S. flexneri 2a or 3a lipopolysaccharide (LPS) elicited significant serum antibody responses against both homologous S. Typhi and heterologous Shigella LPS and protected mice against virulent S. flexneri 2a or 3a challenges. These new S. flexneri 2a and 3a O-antigen-expressing Ty21a vaccine strains, together with our previously constructed Ty21a strains expressing Shigella sonnei or Shigella dysenteriae 1 O-antigens, have the potential to be used together for simultaneous protection against the predominant causes of shigellosis worldwide as well as against typhoid fever.

The global burden of disease caused by extraintestinal pathogenic Escherichia coli (ExPEC) is increasing as the prevalence of multidrug-resistant strains rises. A multivalent ExPEC O-antigen bioconjugate vaccine could have a substantial impact in preventing bacteremia and urinary tract infections. Development of an ExPEC vaccine requires a readout to assess the functionality of antibodies. We developed an opsonophagocytic killing assay (OPA) for four ExPEC serotypes (serotypes O1A, O2, O6A, and O25B) based on methods established for pneumococcal conjugate vaccines. The performance of the assay was assessed with human serum by computing the precision, linearity, trueness, total error, working range, and specificity. Serotypes O1A and O6A met the acceptance criteria for precision (coefficient of variation for repeatability and intermediate precision, ≤50%), linearity (90% confidence interval of the slope of each strain, 0.80, 1.25), trueness (relative bias range, –30% to 30%), and total error (total error range, –65% to 183%) at five serum concentrations and serotypes O2 and O25B met the acceptance criteria at four concentrations (the lowest concentration for serotypes O2 and O25B did not meet the system suitability test of maximum killing of ≥85% of E. coli cells). All serotypes met the acceptance criteria for specificity (opsonization index value reductions of ≤20% for heterologous serum preadsorption and ≥70% for homologous serum preadsorption). The assay working range was defined on the basis of the lowest and highest concentrations at which the assay jointly fulfilled the target acceptance criteria for linearity, precision, and accuracy. An OPA suitable for multiple E. coli serotypes has been developed, qualified, and used to assess the immunogenicity of a 4-valent E. coli bioconjugate vaccine (ExPEC4V) administered to humans.

At the time of this writing, healthcare systems are facing worldwide the pandemic of the coronavirus severe acute respiratory coronavirus 2 (SARS-COV-2) and its associated disease, named cronavirus disease 19 (COVID-19). This virus is a new human pathogen, and currently, there are no specific treatment options.¹ COVID-19 mostly affects the respiratory system, ranging from mild flu-like symptoms to severe pneumonia, but extrarespiratory multisystemic involvement has also been reported.² Li et al.³ recently described the neuroinvasive potential of COVID-19, but, to our knowledge, no case of acute dysimmune neuropathy has been described so far. Here, the authors report the case of an acute and severe peripheral nervous system disorder possibly related to COVID-19 infection.

Anaplastic lymphoma kinase (ALK) inhibitors have been used in patients with non-small cell lung cancer (NSCLC) harboring EML4-ALK fusion gene.¹ Severe skeletal muscle adverse events of ALK inhibitors, such as muscle weakness, have seldom been reported.^2,3 Herein, we describe a patient who showed a severe skeletal muscle deficit after the administration of the ALK inhibitor, alectinib, and was successfully treated by corticosteroids without withdrawal from the cancer therapy.

Objective

To describe the safety and efficacy of rituximab (RTX) in MS and pregnancy, we conducted a retrospective cohort study of 74 pregnancies among 55 women treated with RTX for MS and their offspring.

Objective

To describe the presentations, radiologic features, and outcomes of children with autoimmune encephalitis associated with myelin oligodendrocyte glycoprotein antibodies (MOG abs).

Objective

To investigate the immunologic impact of a single cycle of rituximab (RTX) in children and adolescents with immune-mediated disorders, we evaluated B cells and immunoglobulin levels of 20 patients with neuroimmunologic, nephrologic, dermatologic, and rheumatologic disorders treated under recommended guidelines.

Objective

To assess possible adverse effects on breastfed infants of mothers receiving monoclonal antibodies (MAbs) during pregnancy and/or lactation.

Alemtuzumab is approved for the treatment of relapsing-remitting MS and is used off-label for patients with chronic lymphocytic leukemia and as induction and antirejection therapy in kidney transplant recipients.¹ Guillain-Barré syndrome (GBS) or chronic inflammatory demyelinating polyradiculoneuropathy (CIDP) complicating alemtuzumab treatment was reported in 9 patients with hematologic malignancy or MS.^1–3 The risk of GBS or CIDP in solid organ transplant recipients treated with alemtuzumab is unknown.

Objective

To assess whether neuropathy with anti-myelin-associated glycoprotein (MAG) antibody may improve after treatment with ibrutinib, an oral inhibitor of Bruton tyrosine kinase, we prospectively treated with ibrutinib a cohort of 3 patients with anti-MAG neuropathy and Waldenström macroglobulinemia (WM).

Objective

To provide first real-world experience on patients with MS treated with the B cell–depleting antibody ocrelizumab.

Objective

To determine whether serum neurofilament light chain (sNfL) levels are associated with recent MRI activity in patients with relapsing-remitting MS (RRMS).

Most British railway embankments were constructed between 120 and 180 years ago without the benefit of modern design and construction methods. This can result in undesirable load-deformation characteristics and consequent disruption to present-day railway operations, for which there is unprecedented demand. Annual rail passenger kilometres have approximately doubled in the last 20 years and freight has increased by 60% over the same period. Whereas elements such as rails or bridges can be refurbished or replaced to meet increasing demand, the same is not usually feasible for embankments. Development of techniques to assess embankment performance risks posed by operational capacity enhancements is therefore of increasing significance to railway geotechnical asset management. The two case studies presented in this paper demonstrate how geospatial analysis and data management techniques may be applied to this challenge at both strategic (regional or national) and tactical (site-specific) scales for embankments incorporating plastic clay fill. The case studies also demonstrate, in a world of ever more abundant data, the growing need for engineering geologists and geotechnical engineers to augment their traditional knowledge with comprehensive data management and geospatial analysis skills, these being essential for modern infrastructure asset management.

Thematic collection: This article is part of the ‘Ground-related risk to transportation infrastructure’ collection available at: https://www.lyellcollection.org/cc/Ground-related-risk-to-transportation-infrastructure

Transportation infrastructure owners manage an array of different asset types such as bridges, road pavements, earthworks and drainage. Currently, most organization management procedures are siloed by asset type; however, there are important interactions between these asset groups that need to be managed in a cross-asset way. Although these interactions are known, there is little or no quantification of these interactions. For the first time, this paper quantifies that 74% of Highways England's earthwork failures are a result of drainage-related problems, either the lack of drainage infrastructure or the poor performance of it. The analysis undertaken is an important first step not only in moving towards more connected asset management planning for earthworks and drainage, but to also provide guidance for other owners of earthwork infrastructure assets to improve their strategic asset management procedures.

Thematic collection: This article is part of the Ground-related risk to transportation infrastructure collection available at https://www.lyellcollection.org/cc/Ground-related-risk-to-transportation-infrastructure

South Africa is a mineral-rich country with a diverse geology and a long history of mining. The rich history of mining activities includes the extraction of coal from the Ecca Group Sediments of the Karoo Supergroup (250 Ma), gold and uranium from the Witwatersrand Supergroup (2900 Ma), as well as platinum, uranium, tin and lead from the layered Bushveld Igneous Complex (BIC) (2150 Ma). The extraction of gold, copper, tin, lead and rare earth minerals also took place in the Archean rocks of Swazium age (3500–3000 Ma). The historical mining records have either not been accurately recorded or have been lost over time. This has resulted in significant geohazard risk during infrastructure development, especially in and around historical mining towns, such as Johannesburg and Ermelo. These geohazard risks require careful appraisal and quantification prior to any infrastructure design or construction.

This case study aims to set out the development aspects of the Multi-Faceted Geophysical Modelling Systems approach, which was used by the South African National Roads Agency SOC Ltd (SANRAL) during an investigation of undermined ground for the historical coal-mining town of Ermelo in South Africa. The N11/N2 ring road was planned to go around Ermelo to ensure mobility between major routes, whilst still maintaining town access.

The systems approach used a combination of airborne geophysics (Versatile Time Domain Electromagnetic System (VTEM^TM) and magnetics), generally used in mining exploration, land-based and borehole geophysics, borehole water testing, and ground-truthing. The approach was continuous and iterative, building on the data at hand and reducing unnecessary investigations while eliminating the possibility of anomalies being missed, as in the case of conventional discrete drilling. The investigation ensured that 100% of the route was comprehensively investigated with a high confidence in the geological and geophysical data, and concomitant mitigation of infrastructure risk.

The Multi-Faceted Geophysical Modelling Systems approach was successfully used to identify a previously unknown 1 x 1 m mining stope cavity at 90 m depth and a 3 x 5 m access tunnel at 24 m depth in a timely and cost-effective manner. Seven reverse-circulation percussion boreholes confirmed the structural integrity of these underground cavities, as well as the structural geology along the centreline. Based on the great success achieved in identifying shallow anomalies, this Multi-Faceted Geophysical Modelling Systems approach is now being considered for field trails on the dolomitic formations and the Wild Coast greenfields road project where there are large historical slumps and many fault lines.

Thematic collection: This article is part of the Ground-related risk to transportation infrastructure collection available at https://www.lyellcollection.org/cc/Ground-related-risk-to-transportation-infrastructure

In spite of the Kozeny–Carman formula having been applied effectively to sands, there is at present no generally accepted explanation for why it is inadequate for clays. The impermeable adsorbed water layer surrounding the soil particles throws further light on the issue. By introducing the pervious void ratio, which accounts for the effective voids that a fluid flows through, a modified Kozeny–Carman formula is presented. The results presented here show that the modified Kozeny–Carman formula predicts fairly well the hydraulic conductivity of clays, especially for fine-grained soils.

The presence of large palaeo-landslides can hinder the construction of railway lines if they cause an alteration of the natural balance of the slope, significantly increasing the cost of the project. During the construction works in a section of the Madrid–Asturias high-speed railway line (Spain), a large-scale hillside instability affected 460 m of the section. The ground movement began 10 months after the start of the excavations and remained active throughout the observation period (2008–2010). Data provided by fieldwork, boreholes and instrumental monitoring have allowed the investigation of the geological units involved, together with the geometry and the kinematics of the mass movement. This landslide involves a Paleozoic basement with an estimated volume of 4 400 000 m³. It shows low displacement rates (<45 mm a^–1) and was accommodated on a single surface of rupture, which reaches more than 60 m depth. The kinematics is favoured by structural and lithological conditions, there being a strong rheological contrast in the lower part of the mobilized ground. This movement is linked to a large palaeo-landslide that was partially reactivated when excavations undermined the lower slopes of the hillside. Technical solutions for the stabilization have already caused an additional cost of 17% over the initial budget.

Loess, a wind-blown silty soil, can be deposited under a variety of moisture conditions, including dry deposition, wet deposition and gravitational settling of aggregations formed in moist air by capillary forces at grain contacts. This experimental study uses single and double oedometer tests to assess the effect of depositional water content on the collapse potential of reconstituted samples of the Langley Silt Member, known as Brickearth, a natural loessic soil. A freefall sample preparation technique was used to mimic loess formation and environmental scanning electron microscopy was used to relate the observed behaviour to sample fabric. The results show that loess deposited at higher water contents has a greater collapse potential, which is shown to be related to its looser, more granular fabric.

This case study aims to identify the cubic capacity and geometry of the geological body of silt–organic sediments in the environment of a former gravel pit situated in a drainless depression of the alluvium of the Čierna voda River. It is located in the well-known geotourism locality of Slnečné Jazera in Senec, in the SW of Slovakia. To identify the body, electrical resistivity tomography was combined with the use of sonar. The research shows that this approach is appropriate for a number of activities that are subjects of engineering-geological investigations. The cubic capacity and geometry of specific aqueous engineering-geological environments must be determined in connection with the need for the management, control, quantification and extraction of selected sedimentary bodies. In addition, the management of sustainable development of reservoirs, sedimentation basins, industrial ponds, settling pits and natural pools for recreation (the subject of the case study) is important to control the limit amounts of sediments in such environments. The results of this study may be applied in analogous engineering-geological conditions. The drainless depression Slnečné Jazera contained a body of silt–organic sediments amounting to 23 000 m³ (41 Olympic-size pools of 25 m x 12.5 m x 1.8 m). The maximum thickness of the bottom sediments was about 6.3 m on the alluvium with an articulated morphology owing to the submerged digging of gravel. The proposed approach improved the control of extraction of the sedimentary body and optimized the engineering-geological conditions in this geotourism locality.

Rock is a material that is affected by wear, and the curvature of the asperities on a rock joint surface increases with the degree of wear after shearing. Based on the Greenwood and Williamson (GW) model, a new model considering the change of asperity curvature is proposed to explain the wear behaviour of rock joints. First, the shear stiffness formula for a joint surface is derived when the asperity curvature is constant, which shows that the shear stiffness increases with increase of asperity curvature. According to the Mohr–Coulomb criterion, the yield position of a single asperity under normal force and tangential friction force is discussed. Then, the critical normal force for a single asperity at a specific friction coefficient is obtained, which shows that the normal force corresponds to the curvature radius of the asperity. A rough surface model with multi-level curvature radius is proposed. With increase of normal force, the higher-order asperities gradually fail and the curvature radius become larger. A specific pressure value excites a specific radius of curvature, and the larger the pressure, the larger the radius of curvature. The relation between the normal force and the curvature radius is proposed and a shear stiffness formula considering the change of curvature radius of the asperity is derived. The proposed model is verified on the basis of the published experimental results. The calculation results of the proposed model can reflect the test results well: for a given joint surface, with increase in normal force the joint surface gradually becomes smooth; for different joint surfaces, with increase in roughness, the joint surface is more easily smoothed.

This paper uses a 3D model for stability assessment of Zhujiabaobao waste dump with ground cracks. The study data were gathered via reconnaissance, geomorphological analysis and laboratory experiment. A 3D finite extended element method model that can consider cracks was then used to calculate the factor of safety (FOS) of the waste dump via the strength reduction technique. The simulation shows the dump to have an FOS of 1.22 and both the position and depth of penetration of cracks in the waste dump have a crucial impact on the stability of the slope. Because the study area is located in a seismically active area, simulation and analysis of the dynamic response of the waste dump under different magnitudes of seismic waves (peak acceleration is 0.05, 0.15, 0.25 and 0.45g) were performed via an explicit dynamic model. The simulation shows that high steps in the slope are particularly responsive to earthquakes. The approach used here for analysing stability under static and dynamic loads is useful for hazard prevention and mitigation.

This study addresses the major geo-environmental hazards caused by shallow coal mining in China's western eco-environment frangible area. These hazards are related to the high overburden pressure, surface subsidence, soil and water losses, and land desertification, with consequent vegetation and wildlife losses. To mitigate these hazards, three alternative backfill mining methods are proposed, for three typical shallow coal mining conditions, using aeolian sand-based backfilling materials, which are readily available in this area. The main influencing factor is the backfill material compaction ratio. Its effect on aquiclude deformation and water-conducting fracture evolution are assessed by numerical and physical simulation methods. The potential application of the proposed backfill coal mining alternatives is evaluated and discussed in detail. The results obtained are considered to be valuable for developing a strategy for the coordinated exploitation of coal resources and environmental protection in China's western frangible eco-environment area.

A logistic regression model and a bivariate statistical analysis were used in this paper to evaluate the groundwater recharge susceptibility. The approach is based on the assessment of the relationship involving groundwater recharge and parameters that influence this hydrological process. Surface parameters and aquifer-related parameters were evaluated as thematic map layers using ArcGIS. Then, a weighted-rating method was adopted to categorize each parameter's map. To assess the role of each parameter in the aquifer recharge, a logistic regression model and a bivariate statistical analysis were applied to the Guenniche phreatic aquifer (Tunisia). Models are explored to establish a map showing the aquifer recharge susceptibility. The code Modflow was used to simulate the consequence of the recharge. The recharge amount was introduced in the model and was tested to verify the recharge effect on the hydraulic head for the two models. The obtained results reveal that the recharge as mapped in the bivariate statistical model has a minor impact on the hydraulic head. Results of the logistic regression model are more significant as the hydraulic head is widely affected. This model provides good results in mapping the spatial distribution of the aquifer recharge susceptibility.

Leprosy is caused by Mycobacterium leprae, and it remains underdiagnosed in Burkina Faso. We investigated the use of fluorescent in situ hybridization (FISH) for detecting M. leprae in 27 skin samples (skin biopsy samples, slit skin samples, and skin lesion swabs) collected from 21 patients from Burkina Faso and three from Côte d’Ivoire who were suspected of having cutaneous leprosy. In all seven Ziehl-Neelsen-positive skin samples (four skin biopsy samples and three skin swabs collected from the same patient), FISH specifically identified M. leprae, including one FISH-positive skin biopsy sample that remained negative after testing with PCR targeting the rpoB gene and with the GenoType LepraeDR assay. Twenty other skin samples and three negative controls all remained negative for Ziehl-Neelsen staining, FISH, and rpoB PCR. These data indicate the usefulness of a microscopic examination of skin samples after FISH for first-line diagnosis of cutaneous leprosy. Accordingly, FISH represents a potentially useful point-of-care test for the diagnosis of cutaneous leprosy.

Routine identification of fungal pathogens from positive blood cultures by culture-based methods can be time-consuming, delaying treatment with appropriate antifungal agents. The GenMark Dx ePlex investigational use only blood culture identification fungal pathogen panel (BCID-FP) rapidly detects 15 fungal targets simultaneously in blood culture samples positive for fungi by Gram staining. We aimed to determine the performance of the BCID-FP in a multicenter clinical study. Blood culture samples collected at 10 United States sites and tested with BCID-FP at 4 sites were compared to the standard-of-care microbiological and biochemical techniques, fluorescence in situ hybridization using peptide nucleic acid probes (PNA-FISH) and matrix-assisted laser desorption ionization–time of flight mass spectrometry (MALDI-TOF MS). Discrepant results were analyzed by bi-directional PCR/sequencing of residual blood culture samples. A total of 866 clinical samples, 120 retrospectively and 21 prospectively collected, along with 725 contrived samples were evaluated. Sensitivity and specificity of detection of Candida species (C. albicans, C. auris, C. dubliniensis, C. famata, C. glabrata, C. guilliermondii, C. kefyr, C. krusei, C. lusitaniae, C. parapsilosis, and C. tropicalis) ranged from 97.1 to 100% and 99.8 to 100%, respectively. For the other organism targets, sensitivity and specificity were as follows: 100% each for Cryptococcus neoformans and C. gattii, 98.6% and 100% for Fusarium spp., and 96.2% and 99.9% for Rhodotorula spp., respectively. In 4 of the 141 clinical samples, the BCID-FP panel correctly identified an additional Candida species, undetected by standard-of-care methods. The BCID-FP panel offers a faster turnaround time for identification of fungal pathogens in positive blood cultures that may allow for earlier antifungal interventions and includes C. auris, a highly multidrug-resistant fungus.

Infections due to methicillin-resistant Staphylococcus aureus (MRSA) are present worldwide and represent a major public health concern. The capability of PCR followed by high-resolution melt (HRM) curve analysis for the detection of community-associated and livestock-associated MRSA strains and the identification of staphylococcal protein A (spa) locus was evaluated in 74 MRSA samples which were isolated from the environment, humans, and pigs on a single piggery. PCR-HRM curve analysis identified four spa types among MRSA samples and differentiated MRSA strains accordingly. A nonsubjective differentiation model was developed according to genetic confidence percentage values produced by tested samples, which did not require visual interpretation of HRM curve results. The test was carried out at different settings, and result data were reanalyzed and confirmed with DNA sequencing. PCR-HRM curve analysis proved to be a robust and reliable test for spa typing and can be used as a tool in epidemiological studies.

Q fever, caused by Coxiella burnetii, is a worldwide zoonotic disease that may cause severe forms in humans and requires a specific and prolonged antibiotic treatment. Although current serological and molecular detection tools allow a reliable diagnosis of the disease, culture of C. burnetii strains is mandatory to assess their susceptibility to antibiotics and sequence their genome in order to optimize patient management and epidemiological studies. However, cultivating this fastidious microorganism is difficult and restricted to reference centers, as it requires biosafety level 3 laboratories and relies on cell culture performed by experienced technicians. In addition, the culture yield is low, which results in a small number of isolates being available. In this work, we developed a novel high-content screening (HCS) isolation strategy based on optimized high-throughput cell culture and automated microscopic detection of infected cells with specifically designed algorithms targeting cytopathic effects. This method was more efficient than the shell vial assay, at the level of time dependency, when applied to both frozen specimens (7 isolates recovered by HCS only, sensitivity 91% versus 78% for shell vial) and fresh samples (1 additional isolate using HCS, sensitivity 7% versus 5% for shell vial), for which most strains were recovered more rapidly with the new technique. In addition, detecting positive cultures by an automated microscope reduced the need for expertise and saved 24% of technician working time. Application of HCS to antibiotic susceptibility testing of 12 strains demonstrated that it was as efficient as the standard procedure that combines shell vial culture and quantitative PCR.

Quantitative bacterial culture of bronchoalveolar lavage fluids (BALF) is labor-intensive, and the delay involved in performing culture, definitive identification, and susceptibility testing often results in prolonged use of broad-spectrum antibiotics. The Unyvero lower respiratory tract (LRT) panel (Curetis, Holzgerlingen, Germany) allows the multiplexed rapid detection and identification of 20 potential etiologic agents of pneumonia within 5 h of collection. In addition, the assay includes detection of gene sequences that confer antimicrobial resistance. We retrospectively compared the performance of the molecular panel to routine quantitative bacterial culture methods on remnant BALF. Upon testing 175 BALF, we were able to analyze positive agreement of 181 targets from 129 samples, and 46 samples were negative. The positive percent agreement (PPA) among the microbial targets was 96.5%, and the negative percent agreement (NPA) was 99.6%. The targets with a PPA of <100% were Staphylococcus aureus (34/37 [91.9%]), Streptococcus pneumoniae (10/11 [90.9%]), and Enterobacter cloacae complex (2/4 [50%]). For the analyzable resistance targets, concordance with phenotypic susceptibility testing was 79% (14/18). This study found the Unyvero LRT panel largely concordant with culture results; however, no outcome or clinical impact studies were performed.

Klebsiella species are problematic pathogens in neonatal units and may cause outbreaks, for which the sources of transmission may be challenging to elucidate. We describe the use of whole-genome sequencing (WGS) to investigate environmental sources of transmission during an outbreak of extended-spectrum-β-lactamase (ESBL)-producing Klebsiella michiganensis colonizing neonates. Ceftriaxone-resistant Klebsiella spp. isolated from neonates (or their mothers) and the hospital environment were included. Short-read sequencing (Illumina) and long-read sequencing (MinION; Oxford Nanopore Technologies) were used to confirm species taxonomy, to identify antimicrobial resistance genes, and to determine phylogenetic relationships using single-nucleotide polymorphism profiling. A total of 21 organisms (10 patient-derived isolates and 11 environmental isolates) were sequenced. Standard laboratory methods identified the outbreak strain as an ESBL-producing Klebsiella oxytoca, but taxonomic assignment from WGS data suggested closer identity to Klebsiella michiganensis. Strains isolated from multiple detergent-dispensing bottles were either identical or closely related by single-nucleotide polymorphism comparison. Detergent bottles contaminated by K. michiganensis had been used for washing milk expression equipment. No new cases were identified once the detergent bottles were removed. Environmental reservoirs may be an important source in outbreaks of multidrug-resistant organisms. WGS, in conjunction with traditional epidemiological investigation, can be instrumental in revealing routes of transmission and guiding infection control responses.

Screening for Chlamydia trachomatis and Neisseria gonorrhoeae at the pharyngeal, urogenital, and anorectal sites is recommended for men who have sex with men (MSM). Combining the three individual-site samples into a single pooled sample could result in significant cost savings, provided there is no significant sensitivity reduction. The aim of this study was to examine the sensitivity of pooled samples for detecting chlamydia and gonorrhea in asymptomatic MSM using a nucleic acid amplification test. Asymptomatic MSM who tested positive for chlamydia or gonorrhoea were invited to participate. Paired samples were obtained from participants prior to administration of treatment. To form the pooled sample, the anorectal swab was agitated in the urine specimen transport tube and then discarded. The pharyngeal swab and 2 ml of urine sample were then added to the tube. The difference in sensitivity between testing of pooled samples and individual-site testing was calculated against an expanded gold standard, where an individual is considered positive if either pooled-sample or individual-site testing returns a positive result. All samples were tested using the Aptima Combo 2 assay. A total of 162 MSM were enrolled in the study. Sensitivities of pooled-sample testing were 86% (94/109; 95% confidence interval [CI], 79 to 92%]) for chlamydia and 91% (73/80; 95% CI, 83 to 96%) for gonorrhea. The sensitivity reduction was significant for chlamydia (P = 0.02) but not for gonorrhea (P = 0.34). Pooling caused 22 infections (15 chlamydia and 7 gonorrhoea) to be missed, and the majority were single-site infections (19/22). Pooling urogenital and extragenital samples from asymptomatic MSM reduced the sensitivity of detection by approximately 10% for chlamydia but not for gonorrhea.

Microscopy and rapid diagnostic tests (RDTs) are the main diagnostic tools for malaria but fail to detect low-density parasitemias that are important for maintaining malaria transmission. To complement existing diagnostic methods, an isothermal reverse transcription-recombinase polymerase amplification and lateral flow assay (RT-RPA) was developed. We compared the performance with that of ultrasensitive reverse transcription-quantitative PCR (uRT-qPCR) using nucleic acid extracts from blood samples (n = 114) obtained after standardized controlled human malaria infection (CHMI) with Plasmodium falciparum sporozoites. As a preliminary investigation, we also sampled asymptomatic individuals (n = 28) in an area of malaria endemicity (Lambaréné, Gabon) to validate RT-RPA and assess its performance with unprocessed blood samples (dbRT-RPA). In 114 samples analyzed from CHMI trials, the positive percent agreement to uRT-qPCR was 90% (95% confidence interval [CI], 80 to 96). The negative percent agreement was 100% (95% CI, 92 to 100). The lower limit of detection was 64 parasites/ml. In Gabon, RT-RPA was 100% accurate with asymptomatic volunteers (n = 28), while simplified dbRT-RPA showed 89% accuracy. In a subgroup analysis, RT-RPA detected 9/10 RT-qPCR-positive samples, while loop-mediated isothermal amplification (LAMP) detected 2/10. RT-RPA is a reliable diagnostic test for asymptomatic low-density infections. It is particularly useful in settings where uRT-qPCR is difficult to implement.

Human granulocytic anaplasmosis (HGA) is a tick-borne disease caused by the obligate intracellular Gram-negative bacterium Anaplasma phagocytophilum. The disease often presents with nonspecific symptoms with negative serology during the acute phase. Direct pathogen detection is the best approach for early confirmatory diagnosis. Over the years, PCR-based molecular detection methods have been developed, but optimal sensitivity is not achieved by conventional PCR while real-time PCR requires expensive and sophisticated instruments. To improve the sensitivity and also develop an assay that can be used in resource-limited areas, an isothermal DNA amplification assay based on recombinase polymerase amplification (RPA) was developed. To do this, we identified a 171-bp DNA sequence within multiple paralogous copies of msp2 within the genome of A. phagocytophilum. Our novel RPA assay targeting this sequence has an analytical limit of detection of one genome equivalent copy of A. phagocytophilum and can reliably detect 125 bacteria/ml in human blood. A high level of specificity was demonstrated by the absence of nonspecific amplification using genomic DNA from human or DNA from other closely-related pathogenic bacteria, such as Anaplasma platys, Ehrlichia chaffeensis, Orientia tsutsugamushi, and Rickettsia rickettsii, etc. When applied to patient DNA extracted from whole blood, this new RPA assay was able to detect 100% of previously diagnosed A. phagocytophilum cases. The sensitivity and rapidness of this assay represents a major improvement for early diagnosis of A. phagocytophilum in human patients and suggest a role for better surveillance in its reservoirs or vectors, especially in remote regions where resources are limited.

Limited treatment options contribute to high morbidity/mortality rates with carbapenem-resistant, Gram-negative bacterial infections. New approaches for carbapenemase-producing organism (CPO) detection may help inform clinician decision-making on patient treatment and infection control. BD Phoenix CPO detect (CPO detect) detects and classifies carbapenemases in Enterobacterales, Acinetobacter baumannii, and Pseudomonas aeruginosa during susceptibility testing. The clinical performance of CPO detect is reported here. Enterobacterales, Acinetobacter baumannii, and Pseudomonas aeruginosa isolates were evaluated across three sites using CPO detect and a composite reference method (RM); the latter was comprised of the modified carbapenem inactivation method and a MIC screen for ertapenem, imipenem, and meropenem. Multiplex PCR testing was also utilized for Ambler class determination. Positive and negative percentages of agreement (PPA and NPA, respectively) between CPO detect and the RM were determined. The PPA and NPA for Enterobacterales were 98.5% (confidence intervals, 96.6%, 99.4%) and 97.2% (95.8%, 98.2%), respectively. The A. baumannii PPA and NPA, respectively, were 97.1% (90.2%, 99.2%) and 97.1% (89.9%, 99.2%). The P. aeruginosa PPA and NPA, respectively, were 95.9% (88.6%, 98.6%) and 92.3% (86.7%, 95.6%). The PPA values for carbapenemase class designations for all organisms combined and Enterobacterales alone, respectively, were 95.3% (90.2%, 97.8%) and 94.6% (88.8%, 97.5%) for class A, 94.0% (88.7%, 96.6%) and 96.4% (90.0%, 98.8%) for class B, and 95.0% (90.1%, 97.6%) and 99.0% (94.4%, 99.8%) for class D carbapenemases. NPA values for all organisms and Enterobacterales alone ranged from 98.5% to 100%. CPO detect provided accurate detection and classification of CPOs for the majority of isolates of Enterobacterales, Acinetobacter baumannii, and Pseudomonas aeruginosa tested.

MALDI-TOF mass spectrometry (MS) identification of pathogenic filamentous fungi is often impaired by difficulties in harvesting hyphae embedded in the medium and long extraction protocols. The ID Fungi Plate (IDFP) is a novel culture method developed to address such difficulties and improve the identification of filamentous fungi by MALDI-TOF MS. We cultured 64 strains and 11 clinical samples on IDFP, Sabouraud agar-chloramphenicol (SAB), and ChromID Candida agar (CAN2). We then compared the three media for growth, ease of harvest, amount of material picked, and MALDI-TOF identification scores after either rapid direct transfer (DT) or a long ethanol-acetonitrile (EA) extraction protocol. Antifungal susceptibility testing and microscopic morphology after subculture on SAB and IDFP were also compared for ten molds. Growth rates and morphological aspects were similar for the three media. With IDFP, harvesting of fungal material for the extraction procedure was rapid and easy in 92.4% of cases, whereas it was tedious on SAB or CAN2 in 65.2% and 80.3% of cases, respectively. The proportion of scores above 1.7 (defined as acceptable identification) were comparable for both extraction protocols using IDFP (P = 0.256). Moreover, rates of acceptable identification after DT performed on IDFP (93.9%) were significantly higher than those obtained after EA extraction with SAB (69.7%) or CAN2 (71.2%) (P = <0.001 and P = 0.001, respectively). Morphological aspects and antifungal susceptibility testing were similar between IDFP and SAB. IDFP is a culture plate that facilitates and improves the identification of filamentous fungi, allowing accurate routine identification of molds with MALDI-TOF-MS using a rapid-extraction protocol.

Clostridioides difficile infection (CDI) is one of the most common health care-associated infections that can cause significant morbidity and mortality. CDI diagnosis involves laboratory testing in conjunction with clinical assessment. The objective of this study was to assess the performance of various C. difficile tests and to compare clinical characteristics, Xpert C. difficile/Epi (PCR) cycle threshold (C_T), and Singulex Clarity C. diff toxins A/B (Clarity) concentrations between groups with discordant test results. Unformed stool specimens from 200 hospitalized adults (100 PCR positive and 100 negative) were tested by cell cytotoxicity neutralization assay (CCNA), C. diff Quik Chek Complete (Quik Chek), Premier Toxins A and B, and Clarity. Clinical data, including CDI severity and CDI risk factors, were compared between discordant test results. Compared to CCNA, PCR had the highest sensitivity at 100% and Quik Chek had the highest specificity at 100%. Among clinical and laboratory data studied, prevalences of leukocytosis, prior antibiotic use, and hospitalizations were consistently higher across all subgroups in comparisons of toxin-positive to toxin-negative patients. Among PCR-positive samples, the median C_T was lower in toxin-positive samples than in toxin-negative samples; however, C_T ranges overlapped. Among Clarity-positive samples, the quantitative toxin concentration was significantly higher in toxin-positive samples than in toxin-negative samples as determined by CCNA and Quik Chek Toxin A and B. Laboratory tests for CDI vary in sensitivity and specificity. The quantitative toxin concentration may offer value in guiding CDI diagnosis and treatment. The presence of leukocytosis, prior antibiotic use, and previous hospitalizations may assist with CDI diagnosis, while other clinical parameters may not be consistently reliable.

The number of onsite clinical microbiology laboratories in hospitals is decreasing, likely related to the business model for laboratory consolidation and labor shortages, and this impacts a variety of clinical practices, including that of banking isolates for clinical or epidemiologic purposes. To determine the impact of these trends, infectious disease (ID) physicians were surveyed regarding their perceptions of offsite services. Clinical microbiology practices for retention of clinical isolates for future use were also determined. Surveys were sent to members of the Infectious Diseases Society of America’s (IDSA) Emerging Infections Network (EIN). The EIN is a sentinel network of ID physicians who care for adult and/or pediatric patients in North America and who are members of IDSA. The response rate was 763 (45%) of 1,680 potential respondents. Five hundred forty (81%) respondents reported interacting with the clinical microbiology laboratory. Eighty-six percent of respondents thought an onsite laboratory very important for timely diagnostic reporting and ongoing communication with the clinical microbiologist. Thirty-five percent practiced in institutions where the core microbiology laboratory has been moved offsite, and an additional 7% (n = 38) reported that movement of core laboratory functions offsite was being considered. The respondents reported that only 24% of laboratories banked all isolates, with the majority saving isolates for less than 30 days. Based on these results, the trend toward centralized core laboratories negatively impacts the practice of ID physicians, potentially delays effective implementation of prompt and targeted care for patients with serious infections, and similarly adversely impacts infection control epidemiologic investigations.

Prosthetic joint infections are difficult to diagnose and treat due to biofilm formation by the causative pathogens. Pathogen identification relies on microbial culture that requires days to weeks, and in the case of chronic biofilm infections, lacks sensitivity. Diagnosis of infection is often delayed past the point of effective treatment such that only the removal of the implant is curative. Early diagnosis of an infection based on antibody detection might lead to less invasive, early interventions. Our study examined antibody-based assays against the Staphylococcus aureus biofilm-upregulated antigens SAOCOL0486 (a lipoprotein), glucosaminidase (a domain of SACOL1062), and SACOL0688 (the manganese transporter MntC) for detection of chronic S. aureus infection. We evaluated these antigens by enzyme-linked immunosorbent assay (ELISA) using sera from naive rabbits and rabbits with S. aureus-mediated osteomyelitis, and then we validated a proof of concept for the lateral flow assay (LFA). The SACOL0688 LFA demonstrated 100% specificity and 100% sensitivity. We demonstrated the clinical diagnostic utility of the SACOL0688 antigen using synovial fluid (SF) from humans with orthopedic implant infections. Elevated antibody levels to SACOL0688 in clinical SF specimens correlated with 91% sensitivity and 100% specificity for the diagnosis of S. aureus infection by ELISA. We found measuring antibodies levels to SACOL0688 in SF using ELISA or LFA provides a tool for the sensitive and specific diagnosis of S. aureus prosthetic joint infection. Development of the LFA diagnostic modality is a desirable, cost-effective option, potentially providing rapid readout in minutes for chronic biofilm infections.

Pyrazinamide (PZA) is considered the pivot drug in all tuberculosis treatment regimens due to its particular action on the persistent forms of Mycobacterium tuberculosis. However, no drug susceptibility test (DST) is considered sufficiently reliable for routine application. Although molecular tests are endorsed, their application is limited to known PZA resistance associated mutations. Microbiological DSTs for PZA have been restricted by technical limitations, especially the necessity for an acidic pH. Here, for the first time, MODS culture at neutral pH was evaluated using high PZA concentrations (400 and 800 μg/ml) to determine PZA susceptibility directly from sputum samples. Sputum samples were cultured with PZA for up to 21 days at 37°C. Plate reading was performed at two time points: R1 (mean, 10 days) and R2 (mean, 13 days) for each PZA concentration. A consensus reference test, composed of MGIT-PZA, pncA sequencing, and the classic Wayne test, was used. A total of 182 samples were evaluated. The sensitivity and specificity for 400 μg/ml ranged from 76.9 to 89.7 and from 93.0 to 97.9%, respectively, and for 800 μg/ml ranged from 71.8 to 82.1 and from 95.8 to 98.6%, respectively. Compared to MGIT-PZA, our test showed a similar turnaround time (medians of 10 and 12 days for PZA-sensitive and -resistant isolates, respectively). In conclusion, MODS-PZA is presented as a fast, simple, and low-cost DST that could complement the MODS assay to evaluate resistance to the principal first-line antituberculosis drugs. Further optimization of test conditions would be useful in order to increase its performance.

There are roughly 48,000 deaths caused by influenza annually and an estimated 200,000 people who have undiagnosed human immunodeficiency virus (HIV). These are examples of acute and chronic illnesses that can be identified by employing a CLIA-waived test. Pharmacies across the country have been incorporating CLIA-waived point-of-care tests (POCT) into disease screening and management programs offered in the pharmacy. The rationale behind these programs is discussed. Additionally, a summary of clinical data for some of these programs in the infectious disease arena is provided. Finally, we discuss the future potential for CLIA-waived POCT-based programs in community pharmacies.

This minireview focuses on the microbiologic evaluation of patients with asymptomatic bacteriuria, as well as indications for antibiotic treatment. Asymptomatic bacteriuria is defined as two consecutive voided specimens (preferably within 2 weeks) with the same bacterial species, isolated in quantitative counts of ≥10⁵ CFU/ml in women, including pregnant women; a single voided urine specimen with one bacterial species isolated in a quantitative count ≥10⁵ CFU/ml in men; and a single catheterized urine specimen with one or more bacterial species isolated in a quantitative count of ≥10⁵ CFU/ml in either women or men (or ≥10² CFU/ml of a single bacterial species from a single catheterized urine specimen). Any urine specimen with ≥10⁴ CFU/ml group B Streptococcus is significant for asymptomatic bacteriuria in a pregnant woman. Asymptomatic bacteriuria occurs, irrespective of pyuria, in the absence of signs or symptoms of a urinary tract infection. The two groups with the best evidence of adverse outcomes in the setting of untreated asymptomatic bacteriuria include pregnant women and patients who undergo urologic procedures with risk of mucosal injury. Screening and treatment of asymptomatic bacteriuria is not recommended in the following patient populations: pediatric patients, healthy nonpregnant women, older patients in the inpatient or outpatient setting, diabetic patients, patients with an indwelling urethral catheter, patients with impaired voiding following spinal cord injury, patients undergoing nonurologic surgeries, and nonrenal solid-organ transplant recipients. Renal transplant recipients beyond 1 month posttransplant should not undergo screening and treatment for asymptomatic bacteriuria. There is insufficient evidence to recommend for or against screening of renal transplant recipients within 1 month, patients with high-risk neutropenia, or patients with indwelling catheters at the time of catheter removal. Unwarranted antibiotics place patients at increased risk of adverse effects (including Clostridioides difficile diarrhea) and contribute to antibiotic resistance. Methods to reduce unnecessary screening for and treatment of asymptomatic bacteriuria aid in antibiotic stewardship.

Human herpesvirus 6 (HHV-6) is an important cause of meningitis and meningoencephalitis. As testing for HHV-6 in cerebrospinal fluid (CSF) is more readily available using the FilmArray Meningitis/Encephalitis panel (FA-ME; BioFire Diagnostics, Salt Lake City, UT), we aimed to determine the clinical significance of detecting HHV-6 in order to identify true infections and to ensure appropriate antiviral initiation. Chart review on 25 patients positive for HHV-6 by FA-ME was performed to determine clinical presentation, comorbidity, treatment, and outcome. The presence of chromosomally integrated HHV-6 (ciHHV-6) DNA was also investigated. Of 1,005 children tested by FA-ME, HHV-6 was detected in 25 (2.5%). Five patients were diagnosed with either HHV-6 meningitis or meningoencephalitis based on HHV-6 detection in CSF, clinical presentation, and radiographic findings. Detection of HHV-6 by FA-ME led to discontinuation of acyclovir within 12.0 h in all 12 patients empirically treated with acyclovir. Six of the 12 patients were started on ganciclovir therapy within 6.8 h; 4 of these were treated specifically for HHV-6 infection, whereas therapy was discontinued in the remaining 2 patients. CSF parameters were not generally predictive of HHV-6 positivity. The presence of ciHHV-6 was confirmed in 3 of 18 patients who could be tested. Five of the 25 patients included in the study were diagnosed with HHV-6 meningitis/meningoencephalitis. FA-ME results led to discontinuation of empirical antiviral treatment in 12 patients and appropriate initiation of ganciclovir in 4 patients. In our institution, detection of HHV-6 using FA-ME led to faster establishment of disease etiology and optimization of antimicrobial therapy.

On 31 December 2019, the World Health Organization was informed of a cluster of cases of pneumonia of unknown etiology in Wuhan, China. Subsequent investigations identified a novel coronavirus, now named severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), from the affected patients. Highly sensitive and specific laboratory diagnostics are important for controlling the rapidly evolving SARS-CoV-2-associated coronavirus disease 2019 (COVID-19) epidemic. In this study, we developed and compared the performance of three novel real-time reverse transcription-PCR (RT-PCR) assays targeting the RNA-dependent RNA polymerase (RdRp)/helicase (Hel), spike (S), and nucleocapsid (N) genes of SARS-CoV-2 with that of the reported RdRp-P2 assay, which is used in >30 European laboratories. Among the three novel assays, the COVID-19-RdRp/Hel assay had the lowest limit of detection in vitro (1.8 50% tissue culture infective doses [TCID₅₀]/ml with genomic RNA and 11.2 RNA copies/reaction with in vitro RNA transcripts). Among 273 specimens from 15 patients with laboratory-confirmed COVID-19 in Hong Kong, 77 (28.2%) were positive by both the COVID-19-RdRp/Hel and RdRp-P2 assays. The COVID-19-RdRp/Hel assay was positive for an additional 42 RdRp-P2-negative specimens (119/273 [43.6%] versus 77/273 [28.2%]; P < 0.001), including 29/120 (24.2%) respiratory tract specimens and 13/153 (8.5%) non-respiratory tract specimens. The mean viral load of these specimens was 3.21 x 10⁴ RNA copies/ml (range, 2.21 x 10² to 4.71 x 10⁵ RNA copies/ml). The COVID-19-RdRp/Hel assay did not cross-react with other human-pathogenic coronaviruses and respiratory pathogens in cell culture and clinical specimens, whereas the RdRp-P2 assay cross-reacted with SARS-CoV in cell culture. The highly sensitive and specific COVID-19-RdRp/Hel assay may help to improve the laboratory diagnosis of COVID-19.