High-pressure crystallographic data can be measured using a diamond anvil cell (DAC), which allows the sample to be viewed only along a cell vector which runs perpendicular to the diamond anvils. Although centring a sample perpendicular to this direction is straightforward, methods for centring along this direction often rely on sample focusing, measurements of the direct beam or short data collections followed by refinement of the crystal offsets. These methods may be inaccurate, difficult to apply or slow. Described here is a method based on precise measurement of the offset in this direction using a confocal optical device, whereby the cell centre is located at the mid-point of two measurements of the distance between a light source and the external faces of the diamond anvils viewed along the forward and reverse directions of the cell vector. It is shown that the method enables a DAC to be centred to within a few micrometres reproducibly and quickly.

Understanding the structure–property relationship in electrocatalysts under working conditions is crucial for the rational design of novel and improved catalytic materials. This paper presents the Aarhus University reactor for electrochemical studies using X-rays (AUREX) operando electrocatalytic flow cell, designed as an easy-to-use versatile setup with a minimal background contribution and a uniform flow field to limit concentration polarization and handle gas formation. The cell has been employed to measure operando total scattering, diffraction and absorption spectroscopy as well as simultaneous combinations thereof on a commercial silver electrocatalyst for proof of concept. This combination of operando techniques allows for monitoring of the short-, medium- and long-range structure under working conditions, including an applied potential, liquid electrolyte and local reaction environment. The structural transformations of the Ag electrocatalyst are monitored with non-negative matrix factorization, linear combination analysis, the Pearson correlation coefficient matrix, and refinements in both real and reciprocal space. Upon application of an oxidative potential in an Ar-saturated aqueous 0.1 M KHCO3/K2CO3 electrolyte, the face-centered cubic (f.c.c.) Ag gradually transforms first to a trigonal Ag2CO3 phase, followed by the formation of a monoclinic Ag2CO3 phase. A reducing potential immediately reverts the structure to the Ag (f.c.c.) phase. Following the electrochemical-reaction-induced phase transitions is of fundamental interest and necessary for understanding and improving the stability of electrocatalysts, and the operando cell proves a versatile setup for probing this. In addition, it is demonstrated that, when studying electrochemical reactions, a high energy or short exposure time is needed to circumvent beam-induced effects.

This article presents a web-based framework to build a database without in-depth programming knowledge given a set of CIF dictionaries and a collection of CIFs. The framework consists of two main elements: the public site that displays the information contained in the CIFs in an ordered manner, and the restricted administrative site which defines how that information is stored, processed and, eventually, displayed. Thus, the web application allows users to easily explore, filter and access the data, download the original CIFs, and visualize the structures via JSmol. The modulated structures open database B-IncStrDB, the official International Union of Crystallography repository for this type of material and available through the Bilbao Crystallographic Server, has been re-implemented following the proposed framework.

Here, it is investigated how optical properties of single scatterers in interacting multi-particle systems influence measurable structure factors. Both particles with linear gradients of their scattering length density and core–shell structures evoke characteristic deviations between the weighted sum 〈S(Q)〉 of partial structure factors in a multi-component system and experimentally accessible measurable structure factors SM(Q). While 〈S(Q)〉 contains only the structural information of self-organizing systems, SM(Q) is additionally influenced by the optical properties of their constituents, resulting in features such as changing amplitudes, additional peaks in the low-wavevector region or splitting of higher-order maxima, which are not related to structural reasons. It is shown that these effects can be systematically categorized according to the qualitative behaviour of the form factor in the Guinier region, which enables assessing the suitability of experimentally obtained structure factors to genuinely represent the microstructure of complex systems free from any particular model assumption. Hence, a careful data analysis regarding size distribution and optical properties of single scatterers is mandatory to avoid a misinterpretation of measurable structure factors.

SUBGROUPS is a free online program at the Bilbao Crystallographic Server (https://www.cryst.ehu.es/). It permits the exploration of all possible symmetries resulting from the distortion of a higher-symmetry parent structure, provided that the relation between the lattices of the distorted and parent structures is known. The program calculates all the subgroups of the parent space group which comply with this relation. The required minimal input is the space-group information of the parent structure and the relation of the unit cell of the distorted or pseudo-symmetric structure with that of the parent structure. Alternatively, the wavevector(s) observed in the diffraction data characterizing the distortion can be introduced. Additional conditions can be added, including filters related to space-group representations. The program provides very detailed information on all the subgroups, including group–subgroup hierarchy graphs. If a Crystallographic Information Framework (CIF) file of the parent high-symmetry structure is uploaded, the program generates CIF files of the parent structure described under each of the chosen lower symmetries. These CIF files may then be used as starting points for the refinement of the distorted structure under these possible symmetries. They can also be used for density functional theory calculations or for any other type of analysis. The power and efficiency of the program are illustrated with a few examples.

The two most abundant CaCO3 polymorphs, calcite and aragonite, are universally recognized for the richness of their morphology to which different twins make relevant contributions. The epitaxial transformation calcite ↔ aragonite has long been debated. While the twinning has been thoroughly treated, the homo-epitaxy occurring within each of these minerals has, inexplicably, been overlooked to date, both experimentally and theoretically. Twinning can be deceptive to the point where it can be mistaken for homo-epitaxy, thus making the proposed growth mechanism in the crystal aggregate wrong. Within the present work, the first aim is a theoretical investigation of the homo-epitaxies among the three {10.4}-cleavage, {01.2}-steep and {01.8}-flat rhombohedra of calcite. Accordingly, the specific adhesion energies were calculated between facing crystal forms, unequivocally showing that the {01.2}/{01.8} homo-epitaxy competes with the generation of both {01.2} and {01.8} contact twins. Secondly, the calculation of the specific adhesion energy was extended to consider homo-epitaxy for the {10.4} rhombohedron. The two-dimensional geometric lattice coincidence has been tried for the {00.1} pinacoidal form as well.

Here, a morphologically based approach is used for the in situ characterization of 3D growth rates of facetted crystals from the solution phase. Crystal images of single crystals of the β-form of l-glutamic acid are captured in situ during their growth at a relative supersaturation of 1.05 using transmission optical microscopy. The crystal growth rates estimated for both the {101} capping and {021} prismatic faces through image processing are consistent with those determined using reflection light mode [Jiang, Ma, Hazlehurst, Ilett, Jackson, Hogg & Roberts (2024). Cryst. Growth Des. 24, 3277–3288]. The growth rate in the {010} face is, for the first time, estimated from the shadow widths of the {021} prismatic faces and found to be typically about half that of the {021} prismatic faces. Analysis of the 3D shape during growth reveals that the initial needle-like crystal morphology develops during the growth process to become more tabular, associated with the Zingg factor evolving from 2.9 to 1.7 (>1). The change in relative solution supersaturation during the growth process is estimated from calculations of the crystal volume, offering an alternative approach to determine this dynamically from visual observations.

Presented here is an effective approach to desmearing slit ultra-small-angle neutron scattering (USANS) data, based on complementary small-angle neutron scattering (SANS) measurements, leading to a seamless merging of these data sets. The study focuses on the methodological aspects of desmearing USANS data, which can then be presented in the conventional manner of SANS, enabling a broader pool of data analysis methods. The key innovation lies in the use of smeared SANS data for extrapolating slit USANS, offering a self-consistent integrand function for desmearing with Lake's iterative method. The proposed approach is validated through experimental data on porous anodized aluminium oxide membranes, showcasing its applicability and benefits. The findings emphasize the importance of accurate desmearing for merging USANS and SANS data in the crossover q region, which is particularly crucial for complex scattering patterns.

Here, a recently commissioned five-analyzer Johann spectrometer at the Inner Shell Spectroscopy beamline (8-ID) at the National Synchrotron Light Source II (NSLS-II) is presented. Designed for hard X-ray photon-in/photon-out spectroscopy, the spectrometer achieves a resolution in the 0.5–2 eV range, depending on the element and/or emission line, providing detailed insights into the local electronic and geometric structure of materials. It serves a diverse user community, including fields such as physical, chemical, biological, environmental and materials sciences. This article details the mechanical design, alignment procedures and data-acquisition scheme of the spectrometer, with a particular focus on the continuous asynchronous data-acquisition approach that significantly enhances experimental efficiency.

VMXm joins the suite of operational macromolecular crystallography beamlines at Diamond Light Source. It has been designed to optimize rotation data collections from protein crystals less than 10 µm and down to below 1 µm in size. The beamline has a fully focused beam of 0.3 × 2.3 µm (vertical × horizontal) with a tuneable energy range (6–28 keV) and high flux (1.6 × 1012 photons s−1 at 12.5 keV). The crystals are housed within a vacuum chamber to minimize background scatter from air. Crystals are plunge-cooled on cryo-electron microscopy grids, allowing much of the liquid surrounding the crystals to be removed. These factors improve the signal-to-noise during data collection and the lifetime of the microcrystals can be prolonged by exploiting photoelectron escape. A novel in vacuo sample environment has been designed which also houses a scanning electron microscope to aid with sample visualization. This combination of features at VMXm allows measurements at the physical limits of X-ray crystallography on biomacromolecules to be explored and exploited.

High-repetition-rate free-electron lasers impose stringent requirements on the thermal deformation of beamline optics. The Shanghai HIgh-repetition-rate XFEL aNd Extreme light facility (SHINE) experiences high average thermal power and demands wavefront preservation. To deeply study the thermal field of the first reflection mirror M1 at the FEL-II beamline of SHINE, thermal analysis under a photon energy of 400 eV was executed by fluid and solid heat transfer method. According to the thermal analysis results and the reference cooling water temperature of 30 °C, the temperature of the cooling water at the flow outlet is raised by 0.15 °C, and the wall temperature of the cooling tube increases by a maximum of 0.5 °C. The maximum temperature position of the footprint centerline in the meridian direction deviates away from the central position, and this asymmetrical temperature distribution will directly affect the thermal deformation of the mirror and indirectly affect the focus spot of the beam at the sample.

X-ray multi-projection imaging (XMPI) is an emerging experimental technique for the acquisition of rotation-free, time-resolved, volumetric information on stochastic processes. The technique is developed for high-brilliance light-source facilities, aiming to address known limitations of state-of-the-art imaging methods in the acquisition of 4D sample information, linked to their need for sample rotation. XMPI relies on a beam-splitting scheme, that illuminates a sample from multiple, angularly spaced viewpoints, and employs fast, indirect, X-ray imaging detectors for the collection of the data. This approach enables studies of previously inaccessible phenomena of industrial and societal relevance such as fractures in solids, propagation of shock waves, laser-based 3D printing, or even fast processes in the biological domain. In this work, we discuss in detail the beam-splitting scheme of XMPI. More specifically, we explore the relevant properties of X-ray splitter optics for their use in XMPI schemes, both at synchrotron insertion devices and XFEL facilities. Furthermore, we describe two distinct XMPI schemes, designed to faciliate large samples and complex sample environments. Finally, we present experimental proof of the feasibility of MHz-rate XMPI at the European XFEL. This detailed overview aims to state the challenges and the potential of XMPI and act as a stepping stone for future development of the technique.

X-ray ghost imaging with a crystal beam splitter has advantages in highly efficient imaging due to the simultaneous acquisition of signals from both the object beam and reference beam. However, beam splitting with a large field of view, uniform distribution and high correlation has been a great challenge up to now. Therefore, a dedicated beam splitter has been developed by optimizing the optical layout of a synchrotron radiation beamline and the fabrication process of a Laue crystal. A large field of view, consistent size, uniform intensity distribution and high correlation were obtained simultaneously for the two split beams. Modulated by a piece of copper foam upstream of the splitter, a correlation of 92% between the speckle fields of the object and reference beam and a Glauber function of 1.25 were achieved. Taking advantage of synthetic aperture X-ray ghost imaging (SAXGI), a circuit board of size 880 × 330 pixels was successfully imaged with high fidelity. In addition, even though 16 measurements corresponding to a sampling rate of 1% in SAXGI were used for image reconstruction, the skeleton structure of the circuit board can still be determined. In conclusion, the specially developed beam splitter is applicable for the efficient implementation of X-ray ghost imaging.

Soft X-ray spectroscopy is an important technique for measuring the fundamental properties of materials. However, for measurements of samples in the sub-millimetre range, many experimental setups show limitations. Position drifts on the order of hundreds of micrometres during thermal stabilization of the system can last for hours of expensive beam time. To compensate for drifts, sample tracking and feedback systems must be used. However, in complex sample environments where sample access is very limited, many existing solutions cannot be applied. In this work, we apply a robust computer vision algorithm to automatically track and readjust the sample position in the dozens of micrometres range. Our approach is applied in a complex sample environment, where the sample is in an ultra-high vacuum chamber, surrounded by cooled thermal shields to reach sample temperatures down to 2.5 K and in the center of a superconducting split coil. Our implementation allows sample-position tracking and adjustment in the vertical direction since this is the dimension where drifts occur during sample temperature change in our setup. The approach can be easily extended to 2D. The algorithm enables a factor of ten improvement in the overlap of a series of X-ray absorption spectra in a sample with a vertical size down to 70 µm. This solution can be used in a variety of experimental stations, where optical access is available and sample access by other means is reduced.

The Takagi–Taupin equations are solved in their simplest form (zero deformation) to obtain the Bragg-diffracted and transmitted complex amplitudes. The case of plane-parallel crystal plates is discussed using a matrix model. The equations are implemented in an open-source Python library crystalpy adapted for numerical applications such as crystal reflectivity calculations and ray tracing.

Hard X-ray microscopes with 20–30 nm spatial resolution ranges are an advanced tool for the inspection of materials at the nanoscale. However, the limited efficiency of the focusing optics, for example, a Fresnel zone plate (ZP) lens, can significantly reduce the power of a nanoprobe. Despite several reports on ZP lenses that focus hard X-rays with 20 nm resolution – mainly constructed by zone-doubling techniques – a systematic investigation into the limiting factors has not been reported. We report the structural effects on the focusing and imaging efficiency of 20–30 nm-resolution ZPs, employing a modified beam-propagation method. The zone width and the duty cycle (zone width/ring pitch) were optimized to achieve maximum efficiency, and a comparative analysis of the zone materials was conducted. The optimized zone structures were used in the fabrication of Pt-hydrogen silsesquioxane (HSQ) ZPs. The highest focusing efficiency of the Pt-HSQ-ZP with a resolution of 30 nm was 10% at 7 keV and >5% in the range 6–10 keV, whereas the highest efficiency of the Pt-HSQ-ZP with a resolution of 20 nm was realized at 7 keV with an efficiency of 7.6%. Optical characterization conducted at X-ray beamlines demonstrated significant enhancement of the focusing and imaging efficiency in a broader range of hard X-rays from 5 keV to 10 keV, demonstrating the potential application in hard X-ray focusing and imaging.

Autonomous methods to align beamlines can decrease the amount of time spent on diagnostics, and also uncover better global optima leading to better beam quality. The alignment of these beamlines is a high-dimensional expensive-to-sample optimization problem involving the simultaneous treatment of many optical elements with correlated and nonlinear dynamics. Bayesian optimization is a strategy of efficient global optimization that has proved successful in similar regimes in a wide variety of beamline alignment applications, though it has typically been implemented for particular beamlines and optimization tasks. In this paper, we present a basic formulation of Bayesian inference and Gaussian process models as they relate to multi-objective Bayesian optimization, as well as the practical challenges presented by beamline alignment. We show that the same general implementation of Bayesian optimization with special consideration for beamline alignment can quickly learn the dynamics of particular beamlines in an online fashion through hyperparameter fitting with no prior information. We present the implementation of a concise software framework for beamline alignment and test it on four different optimization problems for experiments on X-ray beamlines at the National Synchrotron Light Source II and the Advanced Light Source, and an electron beam at the Accelerator Test Facility, along with benchmarking on a simulated digital twin. We discuss new applications of the framework, and the potential for a unified approach to beamline alignment at synchrotron facilities.

The Australian Synchrotron Imaging and Medical Beamline (IMBL) uses a superconducting multipole wiggler (SCMPW) source, dual crystal Laue monochromator and 135 m propagation distance to enable imaging and computed tomography (CT) studies of large samples with mono-energetic radiation. This study aimed to quantify two methods for CT dose reduction: wiggler source operation at reduced magnetic field strength, and beam modulation with spatial filters placed upstream from the sample. Transmission measurements with copper were used to indirectly quantify the influence of third harmonic radiation. Operation at lower wiggler magnetic field strength reduces dose rates by an order of magnitude, and suppresses the influence of harmonic radiation, which is of significance near 30 keV. Beam shaping filters modulate the incident beam profile for near constant transmitted signal, and offer protection to radio-sensitive surface organs: the eye lens, thyroid and female breast. Their effect is to reduce the peripheral dose and the dose to the scanned volume by about 10% for biological samples of 35–50 mm diameter and by 20–30% for samples of up to 160 mm diameter. CT dosimetry results are presented as in-air measurements that are specific to the IMBL, and as ratios to in-air measurements that may be applied to other beamlines. As CT dose calculators for small animals are yet to be developed, results presented here and in a previous study may be used to estimate absorbed dose to organs near the surface and the isocentre.

Abu Dhabi Islamic Bank (ADIB) has announced that...

InComm Payments has acquired the digital gift card provider

The inaugural edition of the Global Payments and Fintech Trends Report offers a comprehensive overview of the key trends in fintech and payments for the year 2024 and beyond.

The Global Overview of Payment Providers Report provides insights into the leading companies and trends in the field of payments.

The first edition of the Unlocking the Potential of A2A Payments Report 2024 provides the latest insights into the A2A space.

The Next-Gen Technologies to Detect Fraud and Financial Crime Report 2024 highlights how banks, fintechs, and PSPs leverage AI and emerging tech to detect and combat advanced fraud.

Tadanobu Asano (L) and Chin Han (R) in "Mortal Kombat."; Credit: Warner Bros. Pictures

This content is from Southern California Public Radio. View the original story at SCPR.org.

Chris Rock as Detective Zeke Banks in the film "Spiral."; Credit: Lionsgate

This content is from Southern California Public Radio. View the original story at SCPR.org.

HSBC has launched a cross-border virtual account solution aimed at...

Mastercard has launched the Mastercard Move Commercial...

The Federal Trade Commission (FTC) has...

Yuno, a provider of payment orchestration, has...

TerraPay, a global money movement company,...

US-based digital payments provider Checkout.com has...

Source: Rob Goff 11/11/2024

Volatus Aerospace Inc. (TSXV:FLT; OTCQX:TAKOF:ABBA.F) secured CA$2.8 million (CA$2.8M) through a private placement after having recently completed a financing package for CA$15M, reported Ventum Capital Markets analyst Rob Goff in a Nov. 6 research note. Volatus provides aerial intelligence solutions using drones and other aircraft systems, including inspections, surveillance, design, and sales.

"We believe the two financing rounds should be positively rewarded by investors for the financial flexibility they bring to Volatus, while the commitment of the two debt partners represents a strong validation," Goff wrote.

192% Return Implied

Goff reiterated Ventum's target price on the Canadian aircraft solutions provider of CA$0.38 per share. In comparison, it was trading at the time of the report at CA$0.13 per share. From this price, the return to target is 192%.

Volatus is a Buy.

Plans for Using the Funds

Goff discussed the private placement and Volatus' intended uses of it. For the offering, a total of 19,766,000 units was sold at CA$0.14 apiece. Each unit consists of one common Volatus voting share and one common Volatus voting share purchase warrant. With each warrant, the holder may purchase one Volatus common share for CA$0.20 per warrant share during the 24 months after the close of the raise.

"We believe the equity and debt financing will allow Volatus to invest in working capital to support higher equipment sales," an advantage its smaller peers do not have, Goff wrote.

The company expects to fund about CA$9–12M in unmet equipment sales demand, so Goff forecasts it will designate CA$3–4M to this purpose, to purchase working capital. Other uses of the proceeds are for research and development, capital expenditures and inventory.

Goff reported that Volatus wants to leverage every incremental CA$1M of invested working capital into about CA$3–4M of incremental equipment sales annually, aiming for gross profit margins of about 25% and modest incremental operating costs.

Volatus plans to use proceeds from the debt raise to back pay the outstanding CA$6M senior loan it has with a major Canadian bank. The company also intends to open a new secured line of credit to support anticipated growth. Current debt related to its fleet financing is about CA$5M.

Opportunities for Growth

With more balance sheet flexibility, Goff wrote, Volatus may pursue longer-term contracts with utilities and pipelines for inspection services using unmanned and manned fleets. This would position the company to become a leader in this specific market.

Volatus can monetize its portfolio of drones and landing stations. The U.S.' initiatives and intention to reduce use of Chinese-manufactured products could help drive this expansion. The company has third-party manufacturing capabilities to significantly boost its equipment sales.

"We anticipate that Volatus will leverage its unique software, network, and equipment capabilities, stewarded by an experienced and commercially focused leadership team," Goff wrote.

Future Financial Expectations

Goff discussed forecasts for merger synergies, EBITDA, and revenue. As for initial efficiencies achieved from Volatus' merger with Drone Delivery Canada, they should be seen in Volatus' Q4/24 and Q1/25 financial results, Goff wrote. Already, the company has exceeded CA$2.6M in cost synergies and expects to surpass CA$3M in the near term. By 2026, the company estimates revenue synergies will be about CA$5M-plus and will include initial traction gained from business-to-business cargo delivery.

Looking to 2025, Ventum expects Volatus to turn EBITDA break even in Q2/25 and produce CA$5.7M in positive EBITDA in 2025 versus Volatus' estimate of CA$10M-plus, Goff reported. Ventum estimates that Volatus will generate CA$60.3M in revenue in full-year 2025, less than Volatus' guidance of CA$70M+.

"We anticipate that Volatus will leverage its unique software, network, and equipment capabilities, stewarded by an experienced and commercially focused leadership team," wrote Goff.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1. Doresa Banning wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an independent contractor.
2. This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

Disclosures for Ventum Capital Markets, Volatus Aerospace Inc., November 6, 2024

Analyst Certification I, Rob Goff, hereby certify that all of the views expressed in this report accurately reflect my personal views about the subject securities or issuers. I also certify that no part of my compensation was, is, or will be, directly or indirectly related to the specific recommendations or views expressed in this report. I am the research analyst primarily responsible for preparing this report.

Research Disclosures

1. Ventum Financial Corp. and its affiliates’ holdings in the subject company’s securities, in aggregate exceeds 1% of each company’s issued and outstanding securities.
2. Ventum Financial Corp. and/or its affiliates have received compensation for investment banking services for the subject company over the preceding 12- month period.
3. Ventum Financial Corp. and/or its affiliates expect to receive or intend to seek compensation for investment banking services from the subject company.
4. Ventum Financial Corp. and/or its affiliates have managed or co-managed a public offering of securities for the subject company in the past 12 months.

General Disclosure The affiliates of Ventum Financial Corp. are Ventum Financial (US) Corp., Ventum Financial Services Corp., and Ventum Capital Corp. Analysts are compensated through a combined base salary and bonus payout system. The bonus payout is amongst other factors determined by revenue generated directly or indirectly from various departments including Investment Banking. Evaluation is largely on an activity-based system that includes some of the following criteria: reports generated, timeliness, performance of recommendations, knowledge of industry, quality of research and investment guidance, and client feedback. Analysts and all other Research staff are not directly compensated for specific Investment Banking transactions. None of the material, nor its content, nor any copy of it, may be altered in any way, transmitted to, copied or distributed to any other party, without the prior express written permission of Ventum Financial Corp. Ventum Financial Corp.’s policies and procedures regarding dissemination of research, stock rating and target price changes can be reviewed on our corporate website at www.ventumfinancial.com (Research: Research and Conflict Disclosure).

Participants of all Canadian Marketplaces. Members: Canadian Investment Regulatory Organization, Canadian Investor Protection Fund and AdvantageBC International Business Centre - Vancouver. Estimates and projections contained herein are our own and are based on assumptions which we believe to be reasonable. Information presented herein, while obtained from sources we believe to be reliable, is not guaranteed either as to accuracy or completeness, nor in providing it does Ventum Financial Corp. assume any responsibility or liability. This information is given as of the date appearing on this report, and Ventum Financial Corp. assumes no obligation to update the information or advise on further developments relating to securities. Ventum Financial Corp. and its aೀiliates, as well as their respective partners, directors, shareholders, and employees may have a position in the securities mentioned herein and may make purchases and/or sales from time to time. Ventum Financial Corp. may act, or may have acted in the past, as a ೃnancial advisor, ೃscal agent or underwriter for certain of the companies mentioned herein and may receive, or may have received, a remuneration for their services from those companies. This report is not to be construed as an oೀer to sell, or the solicitation of an oೀer to buy, securities and is intended for distribution only in those jurisdictions where Ventum Financial Corp. is registered as an advisor or a dealer in securities. Any distribution or dissemination of this report in any other jurisdiction is strictly prohibited. Ventum Financial Corp. is a Canadian broker-dealer and is not subject to the standards or requirements of MiFID II. Readers of Ventum Financial Corp. research in the applicable jurisdictions should make their own eೀorts to ensure MiFID II compliance. For further disclosure information, reader is referred to the disclosure section of our website

( Companies Mentioned: TSXV:FLT;OTCQX:TAKOF:ABBA.F), )

In this Saturday, Sept. 6, 2014 file photo, Paris Barclay attends the LA Premiere Screening of "Sons Of Anarchy" at TCL Chinese Theatre, in Los Angeles. A new guild study says that women and minorities were largely shut out of the ranks of TV directors again last season. In a Wednesday, Sept. 17, 2014 statement, Directors Guild President Barclay said it can be "shockingly difficult" to persuade those who control industry hiring to make even small improvements.; Credit: Paul A. Hebert/Paul A. Hebert/Invision/AP

A new guild study says women and minorities were largely shut out of the ranks of TV directors again last season.

The Directors Guild of America report released Wednesday said employers have made no significant improvement in diversity hiring for TV series in the last four years.

According to the study, white males directed the vast majority of the 3,500 cable, broadcast and high-budget online episodes made for the 2013-14 season.

The same holds true for the three previous years, according to guild findings.

In a statement, Directors Guild President Paris Barclay said it can be "shockingly difficult" to persuade those who control industry hiring to make even small improvements.

File: Stephen Yan dresses as Deadpool at Comic-Con on July 19, 2013 in San Diego.; Credit: Sandy Huffaker/Getty Images

Hey, you! Yeah, you reading this! They're finally making a Deadpool movie!

If you like fourth-wall breaking, second-person addresses like the above, you may be in the target audience for the long-in-development "Deadpool," which Twentieth Century Fox announced Thursday that it was finally moving ahead with, according to the Hollywood Reporter. The studio announced a Feb. 12, 2016 release date for the film with Tim Miller set to direct the character who's served as both friend and foe to the X-Men.

The so-called "Merc with a Mouth" is a mercenary character created in the early '90s by artist Rob Liefeld, with Liefeld being an outspoken champion for the character. The character was part of the same Weapon X program that created Wolverine, with a similar healing factor power, but with a horribly scarred face he covers with a mask. He's also been played as crazy, which manifests itself as the character often knowing he's in a comic book and talking directly to the reader.

Ryan Reynolds has long been tied to the project, including playing a version of the character in the much-hated "X-Men Origins: Wolverine," but no deal has been made yet, according to the Reporter.

This follows footage leaking over the summer of a "Deadpool" test with Reynolds voicing the character in a CGI clip. Reynolds said in an interview in the Niagara Falls Review earlier this month that that it's unfortunate the footage leaked, "but who cares," because the positive response to the clip had helped push the film forward after being stuck in development hell.

"The movie has been in a state of limbo for a while. There was such an overpowering reaction to the footage, you sort of feel like, 'Oh, so we weren't crazy for our reasons for loving this character, for loving this role.' It's interesting to see the power of the Internet. It's awe-inspiring, actually," Reynolds told the Review. "And it's neat that Twitter and Facebook and Instagram can move mountains when used in the right way."

Watch the "Deadpool" test footage below (Warning: Contains some adult language):

Deadpool test footage

There'd also been debate about whether a movie would stay true to the character's outrageous attitude mixed with violence and go for an R rating, or whether it would go for a wider audience by staying at PG-13. Deadpool creator Liefeld has argued that the film would work just fine without restricting its audience with an R.

Liefeld tweet 1

Liefeld tweet 2

Liefeld told the Daily Superhero in a previous interview that the footage for the test was filmed three years ago, using motion capture over footage of Reynolds. He also talked up Miller as a director, noting that he directed the pre-credits scene for "Thor: The Dark World."

"Fox had released a relatively small budget for Tim to present his vision of the script written by Rhett Reese and Paul Wernick," Liefeld said. "The digital costume over Ryan Reynold's motion capture (Mo-Cap) performance was an approach they wanted to explore and they had a relatively small window to create this short so they opted to 'test' the look of a digital Deadpool costume over Ryan. I'm quite pleased at how it turned out, especially considering Baraka-Deadpool from Wolverine Origins."

Liefeld was referring to the transformation of Deadpool in "X-Men Origins: Wolverine" to a mouthless, pointy-limbed character in the film, which many fans argued took away what they loved most about Deadpool: His sense of humor. Liefeld also said he'd seen even more impressive sequences than the one that made its way online.

It's unclear whether this will tie in with the other X-Men films, but with the studio's recent attempt to tie together the "First Class" franchise with the older X-Men films in "Days of Future Past" and the character's long history of involvement with the X-Men and other related teams, it seems like a likely move.

MPK Night Market. ; Credit: MPK Night Market (via YouTube)

Ahhhhh. Can you feel that breeze? Cool temps are here to stay through Sunday and we're going ham (in a totally respectable, public radio kind of way). Because frankly, we all deserve a break after sweating ourselves through this near-awful workweek. 

Here's everything you need to know: 

1. Pro volleyball at Hermosa Beach

Video: NVL highlights

These people are serious about volleyball — and they look damn good doing it. Take a trip to Hermosa Beach this weekend, where the National Volleyball League will be hosting its fifth tour stop of the season. The championship will feature 32 elite men’s and women’s teams, all competing for a prize of $50,000. Come by at noon Saturday for a free juniors’ clinic (all ages welcome). Sign up here. 

When: Friday through Sunday | Schedule here

Where: Hermosa Beach Pier | MAP

Price: Free

2. #DTLA salsa dancing

Video: Music Center's Dance Downtown

We know you're dying to show off your salsa skills. Join dancers of all levels at the Music Center's last Dance Downtown of the summer on Friday night. Temps are dropping (hallelujah!) so pack a picnic and get movin'.

When: 6:30 to 10 p.m. Friday 

Where: The Music Center Plaza | MAP 

Price: Free

3. Shades and Shadows 

Looking for something a little different and a bit creepy? The reading series Shades and Shadows focuses solely on horror, sci-fi, fantasy and any other form of dark literature that you’re afraid to put down. To honor its one-year anniversary, the group will be haunting the California Institute of Abnormalarts. (Yes, this exists. It's in North Hollywood). Stop by for an all-female lineup, including Nancy Holder of "Buffy the Vampire Slayer" and the Internet's most famous mortician, Caitlin Doughty.  

When: 8 p.m. Saturday

Where: California Institute of Abnormalarts | MAP

Price: $10

4. Oktoberfest at Angel City

It doesn't feel like fall. The sun is blazing and the thought of drinking a pumpkin-spice latte is just gross. That's why we're sipping on cold beer instead. Savor seasonal craft brews with sausage, sauerkraut and soft pretzels at Angel City Brewery's Oktoberfest on Sunday. Festivities will include keg races, live polka music, ping pong and brewery tours. The best part? You're drinking for a good cause — a portion of the event’s beer and retail store sales will go to the Downtown Women’s Center.

When: Noon to 8 p.m. Sunday

Where: Angel City Brewery | MAP

Price: Free admission

5. Monterey Park Night Market 

Video: Every food you ever wanted

Have your pick of tacos, sliders, pressed juice or even a sushi burrito at Monterey Park's Night Market on Friday. That's not all — other highlights include food and dessert from Sticky Rice and Ice Cream Lab. After indulging, walk it off while viewing funky art prints, interesting hand-painted rocks and L.A.-inspired oil pantings. 

When: 5:30 to 10:30 p.m. Friday

Where: Barnes Park | MAP

Price: Free admission; eat at your own will 

6. Friday Night Flicks 

Watch: The best of Johnny Depp

Take a break from Netflix and catch classic Johnny Depp in "Benny and Joon" at Pershing Square on Friday. Pack a picnic, bring a blanket or lawn chair and watch the '90s flick on a 20-foot inflatable screen. Pro tip: Dogs are welcome (if on a leash). For quick easy access to Pershing Square take the Metro (Pershing Square 5th street stop) or park in the Pershing Square Garage.

When: 8 p.m. Friday

Where: Pershing Square | MAP

Price: Free 

7. Kayaking in Malibu

(Photo: Benjamin Brayfield/KPCC)

Spend a leisurely day kayaking the waves of the Pacific. Head to Malibu Surf Shack and grab a one- or two-seater before staking your spot on Malibu Lagoon State Beach. The state park has shallow tide pools and a lagoon with pelicans — plus, it's home to the Malibu Pier. Pro tip: Wear sunscreen and don't drop your phone in the ocean while taking selfies, people.

When: The Surf Shack is open daily 10 a.m. to 6 p.m. 

Where: Malibu Lagoon State Beach | MAP

Price: $35 per day for single kayak; $50 per day for double kayak

8. Feline Film Festival 

Video: We are gonna have a cat party

Imagine watching "America's Funniest Home Videos," but every entry includes a cat. That's what's happening Sunday at the L.A. Feline Film Festival. Sit back and enjoy over an hour of the most popular feline flicks from the Internet. Special guests include Lil Bub, Tara the Hero and Dusty Klepto Kitty. There will also be music, cat adoptions, a cat costume contest, food and drink. Pro tip: Cat flair is obviously encouraged.

When: 1 to 10 p.m. Sunday

Where: Exposition Park | MAP

Price: $15 admission; $15 parking | Purchase tix here

What'd we miss? Let me know on Twitter @KristenLepore.

Liam Neeson stars as Matthew Scudder in "A Walk Among the Tombstones." ; Credit: Universal Pictures

Screenwriter and director Scott Frank has been trying to make “A Walk Among the Tombstones” for more than a decade, but it wasn't until Liam Neeson signed on that his efforts finally came into view.

Based on the Lawrence Block novel, “Tombstones” stars Liam Neeson as Matthew Scudder, an ex-cop working as an unlicensed private investigator. He agrees to help a well-to-do drug trafficker hunt down the kidnappers who have brutally murdered his wife.

Frank wrote the screenplay and, after the departures of other attached directors, Frank decided to step behind the cameras himself. 

When he came by The Frame studio, Frank spoke with host John Horn about Neeson's great strengths as an action hero and how he convinced Neeson to sign on to the project.

Interview Highlights:

John Horn: Liam Neeson has evolved in a fascinating way as an action hero. When did you start having conversations with him about this movie, and what was it about him as an actor that made it feel like the right fit?

"Well, what's interesting is that Larry Block, the novelist, had always said, going way back to 2003 or something, that the perfect actor for this, after [he saw] 'Michael Collins'...would be Liam Neeson. Chris Andrews, who is Liam's agent, always loved the script and was always trying to find a way to put it together, and he's the one who gave it to Liam back when D.J. [Caruso] was going to direct. So the first time I met Liam to talk about the movie, I was talking to him as the writer, not as the director of the movie. And then when D.J. fell out to go do a different movie at Sony...we had a conversation about directing the movie.

JH: Was this before or after the first "Taken" had come out?

This was well after the first 'Taken,' this was right before the second 'Taken.'

JH: So Liam is...succeeding as a version of that character, and I wonder if that success cuts both ways, that maybe there's a reluctance on his part to not do something that's quite as similar? Or is that part of your conversation that you have with him? 

It absolutely cuts both ways, and that was a huge part of the conversation because there's a kidnapping in this story, and there he is on the telephone for a few minutes at the end of the movie talking to kidnappers, and there are similarities [to 'Taken']. And he knew that was the way to sell the movie, and so he was very reluctant. And I talked to him and I had him watch 'Klute,' and I said, "That's the movie we're gonna make. We're not going to make 'Taken,' we're going to make a movie that's like 'Klute,' or a little bit like 'Dirty Harry,' or one of those old-school '70s films. It's going to feel more like that than an action movie."

JH: Liam Neeson's not physically imposing, but there's something about him that really kind of makes the hair on the back of your neck stand up. What is it about him as an actor in this kind of part?

Well, there's a couple things. One: you believe him. No matter what he's talking about, it seems authentic and true...he has this thing about him that, whatever he's doing, you believe him. Two: he's one of those actors like Gene Hackman where he can convey exposition and make it feel like character. He can talk pages of exposition and make it all feel like it's character and drama — it's a great thing. The other thing about him is that he has this real gravitas, and it almost borders on sadness sometimes; it's interesting when you watch him and you feel like there's all this other life going on behind him.

JH: That he has nothing to lose, in other words.

Nothing to lose, and he says that at one point in the film, but I think it's those things that are all at work at the same time.

The general equation of the δ direct methods is established and applied in its difference form to the definition of one of the two residuals that constitute the SMAR phasing algorithm. These two residuals use the absolute value of ρ and/or the zero conversion of negative Fourier ripples (≥50% of the unit-cell volume). Alternatively, when solved for ρ, the general equation provides a simple derivation of the already known δM tangent formula.

We enumerate the 55083357 iso-edge subdivisions of six-dimensional translational lattices. We report on the use of the method of canonical forms that allows us to apply hashing techniques used in modern databases.

Source: Streetwise Reports 10/18/2024

American Salars Lithium Inc. (USLI:CSE; USLIF:OTC; Z3P:FWB; A3E2NY:WKN) announced it is strategically reviewing multiple Canadian mineral properties prospective for lithium close to recent pegmatite, or hard-rock, lithium discoveries.

The first project under review is about 150 kilometers north of Matagami, where there is a small town with a rail link to much of James Bay, and has the Billy Diamond Highway running through it.

American Salars said it's close to Q2 Metals Corp. (QTWOTSX-V; OTCQB:QUEXF) Cisco Lithium Project, which reported drill intercepts of 215.6 meters at 1.69% Li2O, including 64.6 meters at 2.29%. Also nearby are multiple projects owned by Sayona Mining Ltd (SYA:ASX), which is currently Canada's only lithium producer.

"Our primary objective remains the acquisition of low-cost lithium brine assets in Argentina while expanding our existing NI 43-101 lithium brine resources," said Chief Executive Officer and Director R. Nick Horsley. "We believe that Quebec-based hard rock lithium assets can now be acquired at deeply discounted prices and advanced with critical mineral flow through financing incentives in anticipation of the next lithium rally."

American Salars said it is reviewing additional projects close to Sayona, which will be subject to disclosure "once due diligence is completed and a deal is completed." The company stressed that its "intent to acquire property and current strategic review does not necessarily mean that a transaction will occur."

Current Assets Also in Argentina, Nevada

The company's existing portfolio of lithium deposits includes two NI 43-101-compliant Inferred Mineral Resource Estimates (MREs) consisting of 457,000 tonnes of lithium carbonate equivalent (LCE) at the Candela 2 Lithium Brine Project and a shared MRE at the Pocitos 1 Lithium Brine Project consisting of 760,000 tonnes LCE. The Pocitos MRE is shared with the neighboring Pocitos 2 property, which is not under contract or owned by American Salars, but the company noted that none of the drilling that makes up a partial basis for the MRE took place on the Pocitos 2 block. Both brine projects are located in Salta Province, Argentina.

Major mining company Rio Tino recently invested in Argentina by acquiring Argentina lithium producer Arcadium Lithium for US$6.7 billion, making the company the world's third-largest lithium producer.

American Salars recently released assay results from soil samples collected during its Phase 1 exploration program at its 100%-owned Black Rock South lithium project close to Tesla's Gigafactory in Nevada.

Technical Analyst Clive Maund wrote that the entire "San Emidio Desert basin is a highly prospective lithium exploration zone and is about 38 kilometers long and up to 11 kilometers wide at the widest point, with the central playa measuring about 8.5 kilometers north-south and 4.5 kilometers east-west."

Out of 38 samples, 33 recorded lithium concentration of more than 100 parts per million (ppm) or higher, the company said. The highest grade was 180.5 ppm with an average grade of 131 ppm across the 33 samples of the surface of the property.

Technical Analyst Clive Maund wrote that the entire "San Emidio Desert basin is a highly prospective lithium exploration zone and is about 38 kilometers long and up to 11 kilometers wide at the widest point, with the central playa measuring about 8.5 kilometers north-south and 4.5 kilometers east-west."*

"After a massive speculative runup in 2020 and especially in 2021, the lithium price fell victim to a severe bear market that ran from mid-2022 through the end of 2023," Maund continued. "By the end of last year, this bear market had exhausted itself, and a basing process began that has continued up to the present."

In addition to its location near the Gigafactory, Black Rock South is 93 miles southwest of Thacker and 215 miles northwest of the United States' only producing lithium mine, the Silver Peak lithium brine mine owned by Albermarle.

The Catalyst: More Growth Coming

Lithium is critical in the energy transition for its use in batteries for EVs and other applications. It also is used in electronics, medicine and other industries.

According to a report by Grand View Research, market size for the metal was estimated at US$31.75 billion last year and is projected to grow at a compound annual growth rate (CAGR) of 17.7% from this year through 2030.

"The automotive application segment is expected to witness substantial growth, driven by stringent regulations imposed by government bodies on ICE automakers to reduce carbon dioxide emissions from vehicles," researchers at Grand View said. "This has shifted the interest of automakers toward producing EVs, which is anticipated to benefit the demand for lithium and related products."

EVs and battery storage primarily will fuel future growth of the lithium market, Marin Katusa of Katusa Research wrote recently. He pointed out that all major electric vehicle batteries require lithium, about 1.55 pounds per kilowatt hour of battery capacity, on average.

"I think the data speaks for itself that there's more growth and opportunity on the horizon," Katusa wrote.

According to FastMarkets, prices for the metal have fallen over the past 18 months as weaker demand improved availability. However, this "has done little to deter the appetite for expansion," raw battery materials analyst Jordan Roberts told the publication.[OWNERSHIP_CHART-11095]

The consensus among market analysts points to a recovery in lithium prices in the fourth quarter of 2024, Fastmarkets reported.

"This optimism is grounded in expectations of increased activity . . . to meet end of year targets, strong battery production seen in March and April finally filtering through upstream and low inventory levels necessitating restocking," the website noted.

Ownership and Share Structure

American Salars said it has 28.8 million shares outstanding and 5.5 million warrants, according to the company.

As for insiders, the CEO Horsley owns about 1.83 million, or about 7.37%, with 4666,666 warrants. Strategic investor Hillcrest Merchant Partners owns 1 million shares or 4.03%. There are no institutional investors, and the rest is retail.

Its market cap is CA$4.79 million. It trades in a 52-week range of CA$0.45 and CA$0.08.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1. American Salars Lithium Inc. has a consulting relationship with Street Smart an affiliate of Streetwise Reports. Street Smart Clients pay a monthly consulting fee between US$8,000 and US$20,000.
2. As of the date of this article, officers and/or employees of Streetwise Reports LLC (including members of their household) own securities of American Salars Lithium Inc.
3. Steve Sobek wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an employee.
4. This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

* Disclosure for the quote from the Clive Maund source June 17, 2024

1. For the quote (sourced on June 17, 2024), the Company has paid Street Smart, an affiliate of Streetwise Reports, US$1,500.
2. Author Certification and Compensation: [Clive Maund of clivemaund.com] is being compensated as an independent contractor by Street Smart, an affiliate of Streetwise Reports, for writing the article quoted. Maund received his UK Technical Analysts’ Diploma in 1989. The recommendations and opinions expressed in the article accurately reflect the personal, independent, and objective views of the author regarding any and all of the designated securities discussed. No part of the compensation received by the author was, is, or will be directly or indirectly related to the specific recommendations or views expressed.

Clivemaund.com Disclosures

The quoted article represents the opinion and analysis of Mr. Maund, based on data available to him, at the time of writing. Mr. Maund's opinions are his own, and are not a recommendation or an offer to buy or sell securities. As trading and investing in any financial markets may involve serious risk of loss, Mr. Maund recommends that you consult with a qualified investment advisor, one licensed by appropriate regulatory agencies in your legal jurisdiction and do your own due diligence and research when making any kind of a transaction with financial ramifications. Although a qualified and experienced stock market analyst, Clive Maund is not a Registered Securities Advisor. Therefore Mr. Maund's opinions on the market and stocks cannot be only be construed as a recommendation or solicitation to buy and sell securities.

( Companies Mentioned: USLI:CSE; USLIF:OTC; Z3P:FWB; A3E2NY:WKN, )

Source: Streetwise Reports 10/18/2024

Aero Energy Ltd. (AERO:TSXV; AAUGF:OTC; UU3:FRA) has announced significant advancements at its Murmac and Sun Dog uranium projects in Northern Saskatchewan, with the first drill program revealing high-grade uranium potential. Situated near Uranium City on the Athabasca Basin's northern margin, the projects aim to capitalize on basement-hosted uranium deposits similar to high-grade discoveries in the region.

The initial drill campaign completed 16 holes, targeting 12 key areas, with 12 holes yielding anomalous radioactivity. A major highlight is the new high-grade uranium discovery in drill hole M24-017, which intersected 8.4 meters of mineralization at 0.3% U3O8, including assays peaking at 13.8% U3O8 at just 64 meters below surface. The results confirm Aero's exploration model, which focuses on basement-hosted deposits within graphitic structures, a common feature in Athabasca Basin uranium deposits like Arrow and Triple R.

"From the launch of the company in January, we took a very diligent yet aggressive approach to discovery," stated Galen McNamara, CEO of Aero Energy. "The combination of historical data and the results from the first drill program serve as evidence that basement-hosted mineralization akin to the large deposits beneath and adjacent to the Athabasca Basin is present in the area."

The Murmac project spans 25,607 acres and holds a production legacy of approximately 70 million pounds of U3O8. Similarly, the 48,443-acre Sun Dog property hosts the historic Gunnar uranium mine, which once held the title of the world's largest uranium producer. Past exploration focused on fault-hosted mineralization, missing the basement-hosted uranium potential that Aero's recent findings have validated.

Recent exploration efforts included a VTEM Plus survey, flown over 3,350 kilometers, identifying graphite-rich rocks that support Aero's exploration thesis. Additionally, two new occurrences of strong radioactivity were identified at surface-level scout locations: Target A15 showed 60,793 counts per second, and Target P4 displayed 13,533 counts per second. Summer 2024 drilling included 1,550 meters at Murmac and 1,600 meters at Sun Dog, highlighting shallow, high-grade potential in both areas.

In parallel, Aero Energy has announced a CA$2.5 million non-brokered private placement to support further exploration. The proceeds from flow-through units will fund work programs across Murmac, Sun Dog, and the Strike property, with the remaining funds allocated to general working capital.

Why Uranium?

The uranium sector has recently experienced strong growth, largely driven by increasing global demand and efforts to diversify from Russian supply chains. On September 30, The New York Times discussed the resurgence in Western uranium production, highlighting that "uranium mines are ramping up across the West, spurred by rising demand for electricity and federal efforts to cut Russia out of the supply chain." Aero Energy's recent discoveries and forthcoming winter drilling plans at Murmac and Sun Dog reflect this trend, with CEO Galen McNamara remarking, "The combination of historical data and the results from the first drill program serve as evidence that basement-hosted mineralization . . . is present in the area," suggesting strong potential for the Canadian uranium market to contribute to non-Russian nuclear fuel supplies.

Jeff Clark of The Gold Advisor highlighted his continued confidence in the company by stating, "I remain overweight the stock."

On October 9, Reuters reported that demand from U.S. buyers has been on the rise, as "a strong rise in demand from its U.S. customers" pushed Orano's recent plans to expand uranium enrichment in the United States and France. This shift underscores Aero Energy's recent investments in Northern Saskatchewan, where the company has identified high-grade uranium mineralization in both the Murmac and Sun Dog projects, aiming to meet future supply demands with a focus on basement-hosted deposits.

As Forbes reported on October 11, the uranium market experienced renewed momentum after Russian President Vladimir Putin hinted at the possibility of a ban on uranium exports to Western nations. This suggestion "jolted the uranium market," which had been declining after peaking earlier in the year. The price of uranium rebounded to US$83.50 per pound, reflecting rising concerns about potential supply disruptions. Citi analysts noted that “Russia supplies close to 12% of U3O8, 25% of UF6, and 35% of EUP to international markets,” underscoring the challenges that Western nations, particularly the U.S. and Europe, could face in replacing these critical materials. This market dynamic positions uranium companies operating outside of Russia, like those in the Athabasca Basin, to benefit from supply gaps and heightened demand.

MSN reported on October 13 that the UK's nuclear power capacity is set to decrease dramatically in the coming years, with the planned closure of four out of five remaining nuclear plants by 2028. This reduction in capacity is expected to increase pressure on global uranium supplies as demand for nuclear energy continues to rise amid efforts to meet climate goals. The ongoing shift toward low-carbon energy sources, coupled with the planned closures, could create further supply constraints and drive demand for uranium from alternative sources.

Aero's Catalysts

According to the company's October 2024 investor presentation, the ongoing development at Murmac and Sun Dog highlights Aero Energy's strategy to enhance shareholder value by targeting high-grade uranium deposits in underexplored regions. Aero has leveraged recent technology investments, including VTEM Plus aerial surveys, which identified graphite-rich formations favorable for uranium. The exploration efforts build on the CA$7.6 million previously invested by project partners Fortune Bay and Standard Uranium, which has contributed to refining the drill targets. As Aero works with its partners to maximize the impact of this winter's drilling program, the company's strategic location on the north rim of the Athabasca Basin positions it well to expand these discoveries and attract continued investor interest.

The recently announced CA$2.5 million private placement will further strengthen Aero's financial capacity to carry out its targeted drill campaigns and exploration work.

Analyzing Aero

Jeff Clark of The Gold Advisor, in his October 17 update, noted that Aero Energy has "identified more than 70 kilometers of strike to test for high-grade basement-hosted uranium," emphasizing the company's significant exploration potential in a region known for some of the world's richest uranium deposits.

Clark further commented on Aero Energy's recent results, underscoring the importance of drill hole M24-017, which intersected 8.4 meters of uranium mineralization, grading 0.3% U3O8, with assays reaching as high as 13.8% U3O8. He stated, "While not a discovery hole, per se, this hole underscores the company's thesis that these two projects are prospective for the same type of uranium mineralization as Arrow and Triple R." This observation reinforces Aero Energy's exploration model, which targets basement-hosted uranium deposits similar to those found at other significant Athabasca Basin discoveries. [OWNERSHIP_CHART-11173]

Additionally, Clark expressed optimism regarding Aero Energy's current valuation and future prospects, recommending it as a strong buy at current levels. He highlighted his continued confidence in the company by stating, "I remain overweight the stock," suggesting that Aero Energy presents a compelling opportunity for speculative investors in the uranium exploration space.

The recently announced CA$2.5 million private placement was also acknowledged by Clark as a necessary step to fund further exploration activities. While he expressed some caution about potential dilution, he affirmed his overall support for the financing, noting that "its projects are very much worthy of follow-up."

Ownership and Share Structure

According to Refinitiv, management and insiders own 3.11% of Aero Energy. Of those, CEO Galen McNamara has the most at 2.97%. Institutions owns 4.79% with MMCAP Asset Management holding 3.89%. The rest is retail.

Aero has 92.3 million free float shares and a market cap of CA$4.5 million. The 52 week range is CA$0.040–$0.26.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1) James Guttman wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an employee.

2) This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

( Companies Mentioned: AERO:TSXV;AAUGF:OTC;UU3:FRA, )

Source: Streetwise Reports 10/28/2024

Atlas Lithium Corp. (ATLX:NASDAQ) announced that it has received the operational permit for its Neves Project. This marks a significant milestone for the company's ambitions in lithium production. The permit, approved by the Minas Gerais government in Brazil, allows Atlas Lithium to assemble and operate its processing plant, develop open-pit mining operations, and produce lithium concentrate. The unanimously voted October 25 decision officially progressed with the publication in Minas Gerais' government gazette the following day.

The Neves Project permit, a comprehensive triphasic license (LI/LP/LO), enables a more streamlined development, encompassing initial, installation, and operating permissions.

"Permitting is widely considered the most critical risk in any mining project," said Atlas Lithium CEO Marc Fogassa in the news release. The company's success in obtaining this permit underscores its commitment to sustainable, responsible operations in Brazil's "Lithium Valley."

The Allure of The Lithium Market

According to Visual Capitalist on September 29, battery metal prices have recently "struggled as a surge in new production overwhelmed demand." However, with battery demand projected to increase ninefold by 2040, companies positioned to produce high-quality lithium concentrate, such as Atlas Lithium, are likely to see enhanced market relevance as the demand trajectory for lithium-ion batteries strengthens significantly over the coming decades.

Jake Sekelsky from Alliance Global Partners reaffirmed his "Buy" rating for Atlas Lithium, setting a price target of US$45.00.

As Forbes wrote on October 8, 2024, recent industry dynamics have shown that "a 50% rise in the price of a downtrodden lithium producer has boosted investor hopes that a revival in the battery metal is possible after two grim years of oversupply and low prices."

This improvement in lithium prices reflects a broader trend that may positively impact companies like Atlas Lithium, whose operational progress aligns with the gradual sector recovery. The recent permitting for Atlas Lithium's Neves Project positions it to capitalize on these trends as it advances its lithium production capabilities.

On that same day, Barry Dawes of Martin Place Securities commented that "the lithium market is showing strong signs of upturn," anticipating "lithium shortages post-2027." This outlook emphasizes the sector's potential for heightened demand and supply constraints, which is particularly beneficial for projects advancing toward production. Atlas Lithium's strategy, which includes a modular processing plant and environmentally responsible operations, underscores the company's readiness to meet this anticipated demand.

What's Driving Atlas Forward?

Atlas Lithium's Neves Project's recent permit positions the company to advance toward its production goals with key environmental and operational clearances in place. According to the company's September 2024 investor presentation, this approval aligns with an expedited project timeline and enhances the company's potential to become a low-cost lithium concentrate producer. With Brazil's favorable mining conditions and Atlas Lithium's established partnerships with Tier 1 global companies, the Neves Project is poised for cost-effective operations and market alignment.

Atlas's modular processing plant, currently in the final pre-shipment stage, also demonstrates a strategic focus on efficiency and ESG standards. This advanced plant is set for rapid assembly and installation. It reflects Atlas Lithium's intention to minimize environmental impact and expedite production ramp-up, contributing to a streamlined path toward production in Brazil's burgeoning lithium sector.

Analysts On Atlas

Jake Sekelsky from Alliance Global Partners reaffirmed his "Buy" rating for Atlas Lithium, setting a price target of US$45.00. He described the recent operational permit issuance for the Neves Project as a "significant de-risking event," emphasizing that this milestone positions the project to move forward with construction and operations. Sekelsky highlighted that the approval "marks the final step in the permitting process" and grants Atlas Lithium the authorization to proceed with assembling its processing facility and initiating open-pit mining operations. This development aligns with a clear production path, with Sekelsky noting that the project is now at "shovel-ready status," a critical advancement toward fulfilling Atlas Lithium's strategic objectives. [OWNERSHIP_CHART-11040]

Sekelsky also pointed to the current market environment for lithium, expressing optimism regarding "signs of an upcoming recovery" in lithium prices. He interpreted recent merger and acquisition activities within the sector, including other acquisitions in Brazil's Lithium Valley, as indicators that larger players anticipate a rebound. Sekelsky remarked that this resurgence could benefit advanced hard-rock lithium projects, such as Neves, which "continue to command attention from potential suitors."

Ownership and Share Structure

About 34% of Atlas Lithium is owned by management and insiders. About 11% of the shareholders are institutional. Strategic partners hold another 12%. The rest, about 43%, is retail.

Top shareholders include Waratah Capital Advisors Ltd. with 4.34%, Mitsui & Co. Ltd. with 12.27%, and Candace Shira Associates LLC with 1.39%, according to Reuters.

Its market cap is about US$165 million. It trades in a 52-week range of US$34 and US$6.25.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1) James Guttman wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an employee.

2) This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

( Companies Mentioned: ATLX:NASDAQ, )

Source: Streetwise Reports 11/05/2024

Revolve Renewable Power Corp. (TSXV:REVV; OTCQB:REVVF) released its strongest financial results since going public in 2022, those for fiscal year 2024 (FY24) ended June 30, 2024, the company announced in a news release.

"FY24 marked significant progress for the company as it continues its transition to an owner and operator of renewable energy projects, incorporating a focus on building long-term recurring revenues and cash flow for the business," the release noted.

This company, headquartered in British Columbia, develops utility-scale solar, wind, hydro, and battery storage projects in North America. The Revolve Renewable Business Solutions division installs and operates sub-20-megawatt, behind-the-meter distributed generation assets.

FY24 revenue of US$6.7 million (US$6.7M) exceeded guidance by 35% and surpassed FY23 revenue by 509%. Significant contributors to total revenue for this latest fiscal year were deferred revenues and milestone payments of US$4.25M from the sale of the Bouse and Parker projects to ENGIE. Completion of the WindRiver Power Corp. acquisition in February added $671,738 of total revenue. In the future, WindRiver business is projected to generate recurring revenue of US$1.8M on a 12-month basis.

Adjusted EBITDA in FY24 also was up year over year (YOY), at US$2.7M versus US$1.5M of guidance and (US$2.1M) in FY23.

The gross margin in FY24 was strong at 96%. This was due to increased recurring revenues from the distributed generation portfolio, low operating costs of the rooftop solar projects therein, the addition of operating utility-scale projects in Canada, and sale proceeds from utility-scale projects in the U.S.

FY24 resulted in a net income of US$2.6M, whereas FY23 saw a net loss of US$2.3M.

As for the balance sheet, at FY24's end, Revolve had US$3.2M in cash. Total liabilities were US$10M, up from US$2.6M in FY23 due to nonrecourse debt taken on via the WindRiver acquisition plus additional loans granted by RE Royalties Ltd., a Canadian royalty finance company, throughout FY24.

Operational Progress Made

Operationally, in FY24, according to the release, Revolve generated 8,048,729 kilowatt-hours (8,048,729 kWh) of renewable energy, up 397% from 1,618,456 kWH the year before. The main drivers were continuing output from the company's operational distributed generation portfolio and power produced at the Box Springs wind farm.

During the 15 months between July 1, 2023, and Oct. 31, 2024, Revolve added of 76.1 megawatts (76.1 MW) net of development hydro projects in Canada through the WindRiver acquisition and 480 MW of new greenfield development projects in Canada and the U.S. These took the total of Revolve's utility-scale projects under development to 3,015 MW.

The company made significant progress on its 20 megawatt (20 MW)/80 MWh Vernal BESS battery storage project and 49.5 MW Primus wind projects, now in the late stage of development and expected to reach ready-to-build status at the end of 2025 (2025E).

Revolve is still building its two distributed generation assets in Mexico, totaling 3.45 MW. Permitting work continues on the 3 MW CHP project continues, and the final commissioning of the 450-KW-peak rooftop solar project is taking place.

The distributed generation project pipeline remains at about 150 MW, and efforts are ongoing to sign additional power purchase agreements for new projects from it.

Also, Revolve recently announced its acquisition of a 30-MW-peak solar development project in Alberta, Canada, and expects a 20-MW-peak first phase will be ready for construction by 2025E.

Independent Power Producer

Revolve is a revenue-generating, renewable-focused independent power producer formed in 2012 to capitalize on the growing global demand for renewable power, according to its October 2024 Corporate Presentation.

The company began as solely a developer of utility-scale projects, a line of business that provides investors access to higher returns. Currently, the company has two projects under construction, the ones in Mexico and 3,000-plus MW worth of projects in development in Canada, the U.S., and Mexico. To date, Revolve has developed and sold more than 1,550 MW of utility-scale projects and is now targeting 5,000 MW under development.

Today, Revolve is also an owner-operator of renewable energy distribution generation projects that provide recurring revenue and cash flow via long-term power purchase agreements. Currently, the portfolio contains 150-plus MW of generation projects in Canada and Mexico. The company will continue expanding this line of business through organic growth and mergers and acquisitions (M&A) activity.

Revolve's management team has a successful track record in taking renewable energy projects from greenfield to ready-to-build status and in selling them to large operators. Collectively, it has generated about US$23M in revenue historically from the sale of 1,550 MW of development assets and has raised US$10.3M in equity capital.

Significant Sector Growth Forecasted

The transition to net zero emissions continues driving the renewable energy industry after nearly 200 countries at the COP28 UN Climate Change Conference in December 2023 pledged to triple global capacity by the end of this decade. In a report last month, the International Energy Agency (IEA) forecasted global renewable capacity reaching almost 11,000 gigawatts (GW) by then, reflecting 2.7 times growth, falling short of the goal.

Solar Photovoltaic (PV) Power: Of the growth predicted for renewable energy during this period, solar photovoltaic power will make up 80% of it, according to the IEA, due to its increasing economic attractiveness in most countries.

"At the end of this decade, solar PV is set to become the largest renewable source, surpassing both wind and hydropower," the agency wrote. Hydropower currently is the top source worldwide.

Wind Power: Wind power will account for 15% of all forecasted renewable capacity growth, noted the IEA. This sector has suffered recently from macroeconomic factors and supply chain difficulties, but it is expected to recover. Global wind capacity is projected to expand between 2024 and 2029 at double the rate it grew between 2017 and 2023.

"Policy changes concerning auction design, permitting, and grid connection in Europe, the United States, India, and other emerging and developing economies are expected to enhance project bankability and help the wind sector recover from recent financial difficulties," the article noted.

Hydropower: As for hydropower, capacity is continuing to grow consistently, noted the IEA, due primarily to efforts by China, India, Africa and the Association of Southeast Asian Nations region.

In North America, the U.S. is expected to be the biggest market for hydropower, according to Mordor Intelligence. Between 2024 and 2029, the market is forecasted to expand at a compound annual growth rate of 1%, spurred by demand for renewable energy and investments in hydropower plants.

"The technological advancements in efficiency and decrease in the production cost of hydropower projects are expected to create ample opportunity for market players," the article noted.

The Catalysts: Results of Business as Usual

As Revolve continues effecting its growth strategies, numerous potential stock-boosting events should occur, according to its corporate presentation.

Catalysts resulting from ongoing efforts include further M&A transactions, signing additional power purchase agreements, and bringing new distributed generation projects online. wo increasing revenue and cash flow growth.

Specifically, the company reaching its goals of advancing 70 MW of the BESS and Wind projects to ready-to-build status as well as 30 MW of solar in Canada, in 2025. These have the potential to generate material revenue and add value.

Another catalyst is Revolve achieving ready-to-build status for its two wind projects in Mexico, the 103 MW El 24 and the 400 MW Presa Nueva. The company's ultimate goal with these assets is to partner on or sell them. [OWNERSHIP_CHART-10982]

Finally, payments toward the remaining US$45–55M balance still owed to Revolve regarding the ENGIE sale could boost its stock.

Ownership and Share Structure

About 60% of the company is owned by insiders and management, Revolve said.

Top shareholders include Joseph O'Farrell with 13.21%, Roger Norwich with 12.15%, the CEO and Director Stephen Dalton with 6.01%, President and Director Omar Bojorquez with 4.82%, and Jonathan Clare with 1.84%, according to Reuters and the company.

The rest is retail.

Revolve has a market cap of CA$17.96M. It has 63.04M outstanding shares and 38.75M free float traded shares. Its 52-week high and low are CA$0.50 and CA$0.21 per share, respectively.

Sign up for our FREE newsletter at: www.streetwisereports.com/get-news

Important Disclosures:

1. As of the date of this article, officers and/or employees of Streetwise Reports LLC (including members of their household) own securities of Revolve Renewable Power Corp.
2. Doresa Banning wrote this article for Streetwise Reports LLC and provides services to Streetwise Reports as an independent contractor.
3. This article does not constitute investment advice and is not a solicitation for any investment. Streetwise Reports does not render general or specific investment advice and the information on Streetwise Reports should not be considered a recommendation to buy or sell any security. Each reader is encouraged to consult with his or her personal financial adviser and perform their own comprehensive investment research. By opening this page, each reader accepts and agrees to Streetwise Reports' terms of use and full legal disclaimer. Streetwise Reports does not endorse or recommend the business, products, services or securities of any company.

For additional disclosures, please click here.

( Companies Mentioned: TSXV:REVV;OTCQB:REVVF, )

L-R Access Hollywood film critic Scott Mantz moderates a talk by Neil deGrasse Tyson at the Aero Theatre in Santa Monica, June 9, 2017. Courtesy of the American Cinematheque; Credit: Robert Enger

Neil deGrasse Tyson came onto the science-themed, late night talk show circuit with some clout. The "Cosmos" host, author, educator, and Hayden Planetarium director's first guest when StarTalk "jumped species" from podcast to television was Whoopi Goldberg. 

On Friday June 9, 2017, Tyson opened up a screening of "Star Trek II: The Wrath of Khan" at the American Cinematheque's Aero Theatre in Santa Monica with a talk on his career as an astrophysicist-turned-broadcaster. Access Hollywood's film critic, Scott Mantz, moderated the event and asked Tyson for his three favorite StarTalk guests.

1. Nichelle Nichols

While StarTalk was still just a podcast, Nichols appeared on StarTalk twice. Tyson learned that Star Trek had been a holdover gig for Nichols while paying her dues to land dancing parts on Broadway. Tyson didn't think being Lieutenant Uhura was anything to sneeze at. "She is actually in the chain of command to be captain of the ship," remarked Tyson.

Early on into the series, Nichols decided it was time to go back to New York and find her dream job, Tyson said. However, before leaving she attended a party where she bumped into Dr. Martin Luther King Jr. 

"And he says, 'Oh, my children! We line up at night, and you make us all proud.' And she said, 'Oh, thank you, but I'm going back to New York,' and he said, 'You can't do that. There are no other black people on television. Much less, what there are, they're not in any kind of role of responsibility, and integrity, and dignity.' And he convinced her to stay with the series." - Neil deGrasse Tyson

Tyson teared up, searched for tissues, and said he opened up a bottle of wine at eleven in the morning during the taping with Nichols. "And then, I think it was only one and a half glasses of wine," Tyson said, before he asked Nichols about her and William Shatner's interracial kiss on Star Trek, one of the first interracial kisses on television. Tyson said Nichols told him that the producers of the show wanted to film a version of the scene without the kiss, but that she and Shatner purposefully kept messing up the non-kiss until they ran out of filming time so that the editors of the show wouldn't have any such scene to work with.

Nichols then asked Tyson if he wanted to see what a "racial kiss" was, and then she kissed him.

Tyson also recognized Nichols for her role in recruiting women and people of color for NASA space missions from engineering schools across the United States. Tyson said Nichols was able to find these recruits by looking where NASA had not been looking.

"You were only looking at the U.S. Naval Academy and not Tuskegee Institute where they have a huge engineering group. So she laid out this recipe, and that first astronaut class: it had black people, it had Asians, it had women. And they were at the top of their class when they came out of college and graduate school, so she shaped the modern view of NASA."

2. Biz Stone

"The name doesn't even sound real," said Tyson, referring to the co-founder of Twitter. Tyson counts Stone among the great entrepreneurs who never finished college: Bill Gates, Michael Dell, Mark Zuckerberg.

"Until he described how he envisioned Twitter, I had not fully appreciated what it was," said Tyson. Stone asked Tyson if he had ever seen birds suddenly take flight and flock together after behaving independently, and then, just as swiftly as they started, return to their posts and be "individuals again."

"Twitter is a flocking mechanism for humans," Tyson said. "I live near Ground Zero in New York City," Tyson recalled what could be described as a Twitter moment from 2011. "I'm watching TV, all of a sudden I heard noises in the street. Crowds were developing. I said, 'What's going on?'" While Tyson was sitting in his home, it had been announced that Osama Bin Laden had been killed.

Tyson got on the internet and read the news. "I missed all that, but all these people got the tweet, and everyone gathered back at Ground Zero." That realization of the nature of social media made Biz Stone Tyson's number two guest.

3. Kareem Abdul-Jabbar

Jabbar's appearance on StarTalk is from the upcoming season, so Tyson did not want to reveal the topics of the episode, but he could not resist including Jabbar because of his numerous qualifications.

• He has written a novel about Sherlock Holmes' older brother, Mycroft Holmes (which Jabbar talked with Off-Ramp about in 2015)
• He had a column in Time Magazine
• His high scores on Celebrity Jeopardy
• He's the highest scorer ever for the NBA, with 38,387 career points (Kobe Bryan is third with 33,643 points)
• He played in the All-Star Game 19 times out of his 20 NBA seasons
• He has six NBA Championship rings
• And he was in "Airplane!" and Bruce Lee's "Game of Death"

Tyson gives us one giveaway though, from Jabbar's interview. The one film role that Jabbar is disappointed about never being cast in was Chewbacca in "Star Wars."

Neil deGrasse Tyson's new book is Astrophysics for People in a Hurry. Thanks to him and the American Cinematheque for allowing us to excerpt their presentation on Off-Ramp.

This content is from Southern California Public Radio. View the original story at SCPR.org.

Former LA Times food writer Russ Parsons offers John Rabe a piece of pie, in John's Mercedes; Credit: John Rabe/KPCC

Semi-retired, former LA Times food writer Russ Parsons appeared often on Off-Ramp over the years, helping to explain the city’s communities through their food, as well as giving solid cooking advice. For the final edition of Off-Ramp, John picked up Russ at Jongewaard's Bake-N-Broil, a Long Beach institution.

Parsons brought John an olallieberry pie (a cross of 'Black Logan' blackberries and youngberries), whilst the inimitable Parsons -- author of "How to Pick a Peach: The Search for Flavor from Farm to Table" and "How to Read a French Fry: And Other Stories of Intriguing Kitchen Science" -- opted for the coconut cream.

Listen to the audio for John and Russ' observations on how food brings the disparate cultures of Los Angeles together, and to hear about which part of hosting Off-Ramp is as humbling for John as it is for Parsons when readers tell him they cook his food at Thanksgiving.

This content is from Southern California Public Radio. View the original story at SCPR.org.

L-R: Three Southern California retro fanatics, John Rabe, Chris Nichols, and Charles Phoenix; Credit: John Rabe/KPCC

Is it possible that the two titans of retro Southern California - Charles Phoenix and Charles Nichols - have never been on Off-Ramp at the same time? But maybe that brings up a larger question. Is it even possible for them to exist in the same place, at the same time, or would their meeting cause a cosmic singularity, an undarnable rending of the time-space continuum?

The answers are, stupidly, yes; and thankfully, yes.

Over the 11 years of Off-Ramp, "God Bless Americana" author Charles Phoenix and Los Angeles Magazine's Chris Nichols have played a large part in bringing interesting and endangered places to our listeners. From Pomona to Chatsworth to Bellflower to Anaheim, both men have made careers of highlighting and preserving things that in their day were seen as expendable, flavor-of-the-month, mass marketed creations. Like programmatic architecture (buildings that look like what they're selling or making, i.e. the Donut Hole in La Puente, the Idle Hour - a giant wine cask - in NoHo).

Yet, with hindsight, we've been able to see them as archetypal and important touchstones of our region.

For their final appearances on the show, they got in the Mercedes and shared their love of getting lost in Southern California.

This content is from Southern California Public Radio. View the original story at SCPR.org.

Off-Ramp host John Rabe and Mayor Eric Garcetti playing backgammon in John’s car. Julian “The First Lady of Off-Ramp” Bermudez in the passenger seat with camera. ; Credit: Andrea Garcia

John Rabe’s last show coincides with Eric Garcetti’s inauguration for his second term as Mayor of Los Angeles. In John's car, the two talked about:

• The joys of exploring Los Angeles
• The time the future Mayor's mom and dad took his drivers' license away
• Where Justin Trudeau should visit when he comes to LA
• And how the drop in crime has led to more people doing the Off-Ramp thing

The Mayor also did some slam poetry, and then played a competitive game of backgammon. Listen with the audio player to see who was brown and who was white. And listen to Off-Ramp on the radio to find out who won the game! (Saturday at noon/Sunday at 6pm)

This content is from Southern California Public Radio. View the original story at SCPR.org.