The standardization of screw threads has been a historical endeavor involving several organizations. However, the ASME B1 Screw Thread Committee has emerged as the primary organization responsible for holding, updating, and curating these standards.

For automation-focused companies, Autonomous Process Control (APC) isn’t just a tech advancement—it’s essential for achieving six sigma quality and boosting yields and profitability.

EVs could represent 45 to 58 percent of all vehicles by 2030, with the lithium-ion battery market expected to grow over 30 percent annually. The question is whether battery quality can keep up with this surge.

Recently a discussion centered on organizational empowerment, its relationship to employee self-determination, and the impact on opportunity. The following is a summary of a recent conversation with one of our readers.

The Association for Manufacturing Excellence (AME) is pleased to present its Innovation Summit in Irvine, CA, March 13-14. Leading industry innovators and longtime lean and innovation advocates will converge at the Irvine Marriot to share exclusive insider knowledge with attendees.

Since 2012, Dr. Fübi has served as CEO for RWE Technology.

Gerresheimer, a manufacturer for the pharma and life science industry, will invest more than $88 million in expanding its manufacturing operations in Peachtree City, creating over 200 new jobs for Fayette County.

The official document is titled ISO/IEC 17025: 2017, General requirements for the competence of testing and calibration laboratories. It is the international reference for laboratories performing calibration and testing activities.

In the medical device industry, reliability is critical. Manufacturers conduct extensive testing to ensure devices meet required standards, such as 95/95 or 95/99 confidence and reliability, assessed using Minitab Statistical Software.

System integration strategies vary by industry and project scale. Success relies on thorough planning and execution, especially in machine vision technology. Here are key integration elements for success with vision technologies.

Reverse engineering is the process of taking apart a product to understand its design and functionality. This knowledge is helpful for creating similar products or improving existing designs.

GigE Vision® sets the standard for high-performance industrial cameras, leveraging Gigabit Ethernet for fast, cost-effective image transfer. Introduced in 2006, it enables the transmission of digital images and video over Ethernet networks up to 100 meters. With version 3.0 on the horizon, GigE Vision remains the top choice for long-distance camera setups, offering unmatched performance and affordability.

In a world where AI vision technology is setting new quality control standards across industries, machines can now detect even the smallest defects in car parts and ensure that every packaged product meets health standards.

Industry solutions and products rely on common standards and interfaces, enabling seamless collaboration and increasing efficiency.

Machine vision has evolved significantly over the past forty years, and the demand for specialized solutions has increased in recent years. This article will explore current and future imaging requirements.

The growing use of AI in manufacturing has revolutionized quality control. Traditional inspection methods struggle to keep pace with complex production processes, but AI augments accuracy and efficiency, upholding high-quality standards.

Selecting the correct LED lighting for machine vision can be challenging, even for experienced professionals. While red LEDs are commonly used, blue LEDs can be a superior choice for certain applications.

As businesses increasingly rely on machine vision to enhance quality, improve productivity, and increase the bottom line, technology providers are relying more on industrial computing solutions that enable faster processing speeds and higher efficiency, or that support new tasks altogether. 

The aerospace industry is known for manufacturing parts with critical dimensions and tight tolerances. Despite the high-demanding inspections they are required to perform, important players in the industry have managed to reduce bottlenecks and detect problems early in the manufacturing process.

For fast measurements of displacement, distance and position with high accuracy and resolution, laser triangulation sensors can be used in a variety of applications. The reasons are wear-free measurement, a large measuring range, high precision and easy installation.

The Thermo Scientific™ Niton™ Apollo™ handheld LIBS analyzer gives users confidence when engaging in Quality Control (QC) and Positive Material Identification (PMI).

High temperatures in industrial settings are a leading cause of downtime. Controlling units and microprocessors age quickly under heat pressure, which means that generated heat must be removed efficiently or heat damage will occur.

Quality is a non-negotiable point in manufacturing, especially when it comes to aerospace and defense parts.

Connectivity is the key for companies that want to improve quality.

Product demonstrations and technical presentations on 3D and CT scanning engage audiences in Wisconsin and Ohio.

Solar has held AS and ISO quality management systems registration certificates since 2001.

Olympus now distributes Creaform’s Pipecheck Analyze software.

Do I need a 3D CT volume with the highest resolution for a detailed analysis, or is a fast overview scan sufficient to define the regions from which I want to make additional high-resolution detail scans?

Through its memberships in America Makes, WMT&R joins other leading member organizations from industry, academia, government, non-government agencies, and workforce and economic development resources that are working together to innovate and accelerate additive manufacturing and 3-D printing.

The Irvine, Calif. facility has tripled the local lab size and will offer increased technical support capabilities.

This show hosted the highest number of exhibiting companies ever (2,407). After move in, the building was 76 million pounds heavier.

The importance of plastics was on full display in Orlando this week.

National Association of Manufacturers President and CEO Jay Timmons and Canadian Manufacturers & Exporters (CME) President and CEO Dennis Darby released a joint statement on NAFTA.

SHE requirements are standards and practices to ensure the safety and health of employees, clients, and the public, and to protect the environment. They arise from legal regulations, industry standards, and best practices to minimize occupational hazards and environmental impacts.

Lithium-ion (Li-ion) batteries power many of our daily devices. However, manufacturing them requires scarce base metals and has supply and sustainability challenges. Battery recycling is vital for the supply chain. This article discusses using analytical technologies to maximize Li-ion materials and optimize production.

NDT certification is essential for professionals in industries where material and structural integrity is critical. It demonstrates expertise and professionalism, benefiting individuals and organizations by improving career prospects, quality control, and compliance with industry standards.

Fatigue testing has made significant progress in recent years, especially in test and environmental conditions. Remote monitoring has advanced with the use of AI-enabled camera systems, making it easier to integrate legacy instruments.

FTIR is the primary method for material and contaminant identification but lacks sensitivity to metallic components. X-ray fluorescence (XRF) can fill this gap and improve identification accuracy.

Eddy current inspection is one of the five main non-destructive testing (NDT) methods in the industry, alongside liquid penetrant, magnetic particle, ultrasonic, and radiographic testing. Due to its complex theoretical basis, it is the least used and hardest to understand.

The New Heise PTE-2 handheld calibrator features include a USB port, SD card, backlit LCD and an onboard loop power supply.

The 5790B AC Measurement Standard is an ac voltage and current measurement or transfer standard designed for the most demanding calibration applications.

Air gauges are non-contact devices that utilize air pressure for measurement. They play a crucial role in ensuring precision and quality control in the manufacturing industry, from automotive to aerospace industries. They are particularly valuable for measuring delicate or easily deformable materials.

Clear Seas Research conducted a study on behalf of Quality in order to look at trends in compensation, work hours, and job constraints; overall job satisfaction; and quality improvements, as well as provide a demographic profile of industry professionals. How does your work compare?

AS9100 is a quality management system standard tailored for the aviation, space, and defense industries. It addresses the unique challenges of aerospace operations and was created to improve quality and reduce costs in the industry by the International Aerospace Quality Group.

The aerospace industry constantly seeks new technologies for a competitive edge and enhanced capability. AI and maching learning in additive manufacturing offer significant value for meeting industry needs.

Quality training is crucial for success in rapidly evolving industries like additive manufacturing, welding, and nondestructive testing.

The aerospace industry uses automation and metrology to improve product quality and safety. Components require precise measurements for high quality and efficient production.

The aerospace industry relies on advanced nondestructive testing (NDT) to ensure safety and reliability. Automated technologies, such as phased arrays and 3D scanning, enhance defect detection in aircraft structures, reducing human error. This overview emphasizes the importance of these advancements.

Styli and probe extensions can provide certainty for most measurements. Find the right tools made from the right materials for your quality needs.

What exactly is an audit? An audit is essentially a health check for your business processes. Picture a doctor’s visit, but for your company