Loading new netlist into 23.1 Apparently it does not like many of the specified footprints or padstacks. I have to open the footprint in 231., save the pad stack then save the footprint. This is very time consuming and frustrating to say the least.

I also get the following message

WARNING(SPMHNI-194): Symbol 'SMD_SOD123_ANODE_PIN1' used by RefDes D30 for device 'DIODE_0_SMD_SOD123_ANODE_PIN1_1N4148W-7-F' not found.

The symbol either does not exist in the library path (PSMPATH) or is an old symbol from a previous release.  

Set the correct library path if not set or use dbdo

     The current version of software is unable to open design smd_sod123_anode_pin1.

The design was last saved using version 16.5 and must be updated using DB Doctor. [help]


Going to DB Doctor does nothing, no option to update a footprint?

Tom

Hello everyone!

Have you ever used the axlDllOpen function for Allegro 16.6?

It doesn't work for me. Please give me your solution.
Thank you.

HoangKhoi

Dear Community,

I have created a PCB layout with multiple high-speed nets, I want to check the SI like how signals are reflected and taken to each other.

I have the OrCAD X Professional, how to check the reflection and crosstalk using the OrCAD X Professional software version 24.1.

I want to create a topology flow to the PCB layout and perform the reflection and crosstalk.

Regards,

Rohit Rohan

Dear Community,

I have created a PCB board and let's say I have found some parts of the PCB board where there are impedance issues, then how to resolve that impedance issue using the OrCAD X Professional.

Regards,

Rohit Rohan

Hai Community,

What are the differences between the Cadence OrCAD / Allegro 24.1 with the Altium Designer 24.

Can I get the grid matrix difference between these two tools?

Regards,

Rohit Rohan

Socionext, a leader in SoC design, recently made significant strides in enhancing its design efficiency for a complex billion-gate project. Faced with the initial challenges of lengthy eight-day iterations and a protracted two-month timing signoff process, the objective was to reduce the iteration cycle to just three days. By integrating Cadence's cutting-edge solutions—Certus Closure Solution, Tempus Timing Solution, and Quantus Extraction Solution—Socionext achieved remarkable improvements.

Notably, the Tempus DSTA tool dramatically cut timing closure time by 73%, outperforming conventional single-machine STA methods. This achievement, combined with the synergistic use of Cadence's Certus Closure and Tempus Timing solutions, allowed Socionext to meet their ambitious three-day iteration target and double productivity. Additionally, integrating these solutions significantly decreased both human and machine resource needs, slashing memory and disk costs by up to 90% and halving engineering resources during the optimization and signoff phases.

For more on this collaboration, check out the "Designed with Cadence" success story video on Cadence's website and YouTube channel.

Also, don't miss the on-demand webinar "Fast, Accurate STA for Large-Scale Design Challenges," which provides a deeper dive into Socionext's breakthroughs and the innovative solutions that powered their success.

Training Bytes are not just short technical videos; they are particularly designed to provide comprehensive support in understanding and learning various concepts and methodologies.

These comprehensive yet small Training Bytes can be created to show various concepts and processes in a shorter pane of five to ten minutes, for example, running DFT synthesis, scanning insertion, inserting advanced testability features, test point insertion, debugging DFT violations, etc.

In this blog, we will show you the DFT Synthesis Flow with Cadence's Genus Synthesis Solution using small Training Bytes available on the Cadence Learning and Support Portal. To explore these training bytes more, log on to support.cadence.com and select the learning section to choose the training videos, as shown below.

DFT Synthesis Flow with Genus Synthesis Solution

First, we will understand the Synthesis Flow with DFT in the Genus Synthesis Solution:

Understanding a Script File that Used to Run the Synthesis Flow With DFT

Here, we will show you "How to run the Test Synthesis Flow to Insert Scan Chains and Improve the Testability of a Design" in the Genus Synthesis Solution:

Running Test Synthesis Flow to Insert Scan Chains And Improve the Testability of a Design in the Genus Synthesis Solution

Let's check the flops marked with the dft_mapped attribute for scan mapping in Genus Synthesis Solution:

How to Check Flops Marked With dft_mapped Attribute For Scan Mapping in Genus Synthesis Solution?

How to Find Non-Scan Flops of a Design in Genus? (Video)

Once the flops are mapped to scan flip flops and the scan chain inserted, we will see how to handle the flops marked with the dft_dont_scan attribute for scan mapping in Genus Synthesis Solution.

How to Handle the Flops Marked With the dft_dont_scan Attribute For Scan Mapping in Genus Synthesis Solution?

Here, we will see how to fix DFT Violations using the command fix_dft_violations:

Fixing DFT Violations (Video)

Once the design has been synthesized, let's explore the DFT design hierarchy in Genus Stylus CUI:

Exploring DFT Design Hierarchy in Genus Stylus CUI (Video)

Understand why sequential elements are not mapped to a scan flop:

Why Are Sequential Elements Not Mapped to a Scan Flop?

Explore hierarchical scan synthesis in Genus Stylus Common UI:

Understanding Hierarchical Scan Synthesis in Genus Stylus Common UI. (Video)

To understand how to resolve different warnings and errors (for example, DFT-415, DFT-512, DFT-304, etc.) in Genus Synthesis Solution, here are some videos you can refer to:

How to Resolve Warning: DFT-415 (Video)

How to Resolve Error: DFT-407 (Video)

How to Resolve Error: DFT-404 (Video)

DFT-510 Warning During Mapping (Video)

How to Resolve Warning: DFT-512 (Video)

How to Resolve Warning: DFT-511 (Video)

How to Resolve Warning: DFT-304 (Video)

How to Resolve Warning: DFT-302 (Video)

How to Resolve Error: DFT-515 (Video)

How to Resolve Error: DFT-500 (Video)

Here, we will see how we can generate SDC constraints for DFT constructs for many scan insertion techniques, such as FULLSCAN, OPCG, Boundary Scan, PMBIST, XOR Compression, SmartScan Compression, LBIST, and IEEE 1500:

How to Generate SDC Constraints for DFT Constructs in Genus Synthesis Solution? (Video)

Explore advanced testability features that can be inserted in Genus Synthesis Solution, such as Boundary Scan, Programmable Memory built-in Self-Test Logic (PMBIST), Compression Logic, Masking, and On-Product Clock Generation Logic (OPCG):

Advanced Testability Features (Video)

To understand What the IEEE 1500 Wrapper and its Insertion Flow in Genus Synthesis Solution, follow the bytes:

What Is IEEE 1500 Wrapper? (Video)

IEEE 1500 Wrapper Insertion Flow in Genus Synthesis Solution (Video)

Understand the On-product Clock Generation (OPCG) insertion flow in Genus Synthesis Solution Stylus CUI with this byte:

Understanding On Product Clock Generator (OPCG) Insertion in Genus Stylus CUI (Video)

To debug DFT violations, you can use DFT Analyzer from Genus GUI and explore its features here:

Debugging Using GUI: DFT Analyzer (Video)

Exploring DFT Analyzer View of Genus Synthesis Solution GUI (Video)

To understand What is Shadow Logic, How to Insert Test Points, How to do Testability Analysis Using LBIST, and How to Deterministic Fault Analysis in Genus, follow this article:

What is Shadow Logic

To insert the Boundary Scan Logic in and control Boundary Optimization in Genus Synthesis Solution, refer to these small bytes:

How to Insert Boundary Scan Logic in Genus? Video)

Controlling Boundary Optimization in Genus Synthesis Solution Stylus CUI (Video)

Compression techniques are used during scan insertion to reduce the test data volume and test application time (TAT) while retaining the test coverage. To understand what compression and the compression techniques are, watch this article:

What is Compression Technique During Scan Insertion? (Video)

Interested to know what "Unified Compression" is? To get the concept, you can watch this small demo:

What Is Unified Compression? (Video)

To Explore More, Register for Online Training

• Log on to Cadence.com with your registered Cadence ID and password.
• Select Learning from the menu > Online Courses.
• Search for "Test Synthesis with Genus Stylus Common UI" using the search bar.
• Select the course and click "Enroll."

The Cadence Cerebrus Intelligent Chip Explorer is a revolutionary, machine learning-driven, automated approach to chip design flow optimization. Block engineers specify the design goals, and Cadence Cerebrus will intelligently optimize the Cadence digital full flow to meet the power, performance, and area (PPA) goals in a completely automated way. Use Cerebrus Apps to optimize some aspects of the design as well.

Running a full RTL to GDSII flow, Cadence Cerebrus has a lot of possibilities and combinations of different tool settings to explore.

Using the knowledge from previous runs, combined with on-the-fly analysis within the flow, Cadence Cerebrus can assess many settings combinations and fine-tune the flow accordingly in a very efficient manner.

As technology advances, projects become bigger and way more complex than before. The ability of a single engineer to run simultaneously a large number of blocks in a traditional way is limited. Cadence Cerebrus allows a single engineer to work more efficiently and implement more blocks, while maintaining the same or even better PPA, using compute power.

Being such a revolutionary tool, integrating Cerebrus into your existing flow is surprisingly simple as it can wrap around any existing flow scripts.

Please join me in this course, to learn about the features and basics of Cadence Cerebrus Intelligent Chip Explorer.

We’ll walk through the tool setting stage, explain what is a primitive and how it effects our run, talk about the cost function and the run goals.

We’ll understand the concept of scenarios, learn how to analyze the results of the different runs, and compare them.

In addition, we’ll talk about basic debug rules and methods to analyze failures.

Sounds Interesting?

Please join our “live” one-day Cadence Cerebrus Intelligent Chip Explorer Training @Cadence Feldkirchen planned for October 9th, 2024!

For more details and registration, please contact Training Germany.

If you would like to have an instructor-led training session in another region please contact your local training department.

Become Cadence Certified

Cadence Training Services offers a digital badge for this training course. This badge indicates proficiency in a certain technology or skill and gives you a way to validate your expertise to managers and potential employers. You can highlight your expertise by adding this digital badge to your email signature or any social media platform, such as Facebook or LinkedIn.

Related Training

Innovus Block Implementation with Stylus Common UI

Related Training Bytes

Cerebrus Primitives (Video) 

How to Reuse Cerebrus (Video) 

Cerebrus - Verifying Distribution Script (Video)

How to distribute Cerebrus Scenarios (Video) 

Cerebrus Web Interface Monitor and Control (Video) 

How to Setup Cerebrus for a Successful Run (Video) 

Flow Wrapping: The Cadence Cerebrus Intelligent Chip Explorer Must Have (Webinar) (Video) 

Cerebrus Cost Functions (Video) 

Related Blogs

Training Insights: Cadence Cerebrus Webinar Recording Now Available!

Keep Up with the Revolution—Cadence Cerebrus Training

New to Equivalence Checking? Restart from the Basic Concepts

Training Insights - Free Online Courses on Cadence Learning and Support Portal

Training Insights – Important Facts You Should know About Our Cadence Learning and Support Portal

This blog informs about the new badge certification available for Cadence Certus Closure Solution, that grants credit to your proficiency.(read more)

London LEP and Thames Valley Berkshire LEP hold on to their respective first and second places in the Local Enterprise Partnership rankings, while Oxfordshire LEP jumps up eight places to third. 

Serbia’s technology cluster is gaining momentum and attracting FDI, for both its software and hardware expertise.

Despite its thriving automotive sector, Gothenburg is vulnerable to global economic pressures. However, local authorities are confident that their strategies will see the city ride out the uncertainties related to Brexit and the US-China trade wars.

Bradford has been rated as the most improved city by the Good Growth for Cities 2019 index, while Oxford remained the highest performing UK city.

FDI levels have already fallen throughout Iran's main sphere of influence in the region. 

Lower fertility rates will boost economic growth, according to a demographic model developed by Renaissance Capital. 

Global FDI flows recorded a marginal 1% fall in 2019, but the value of announced greenfield investment projects plummets by 22%.

The situation between the US and China is bad news for South Korea’s investment climate.

President Obrador aims to mobilise billions in public and private investment to create an alternative to the Panama Canal along the Tehuantepec corridor. 

Up to 18 countries across Latin America have joined China’s new Belt and Road Initiative, hoping to boost their infrastructure development and investment.  

A government bailout for the ailing subsidiary of the telecoms powerhouse has fallen through. 

The XT4 compact crossover ends production in January after one generation The Cadillac Optiq electric crossover will take the place as the entry point into the Cadillac brand Production of the XT4 ends not longer after it ended on the Chevy Malibu as GM retools its Fairfax Assembly for the next Bolt EV A year after an interior glow-up, Cadillac...

Cadillac Vistiq revealed as brand's “globally sized” electric three-row SUV Vistiq comes standard with 615 hp and 102 kwh Pricing starts at $78,790, including destination Cadillac's expansion of its electric vehicle lineup continues with the arrival of the 2026 Vistiq, a midsize SUV with third-row seats designed to fill the gap between...

The Cadillac Vistiq will serve as the electric XT6 three-row SUV replacement Cadillac Vistiqs are expected to have about 300 miles of EPA-rated range The Vistiq will cost $78,790 when it arrives in 2025. Cadillac on Tuesday confirmed additional details of the Vistiq three-row electric SUV, which remains on track for a launch next year as a 2026...

Foreign explorers claimed Madeira 600 years ago. Today, foreign investors are taking advantage of abundant opportunities in upmarket tourism, as well as a burgeoning tech sector on the island. Sebastian Shehadi reports.

Pedro Calado, vice-president of Madeira’s regional government, tells Sebastian Shehadi about the island's capacity for more upmarket tourism and its ongoing struggle to gain financial independence from Portugal. 

On top of EU access, an impressive quality of life, talented labour and a thriving tourism sector, Madeira offers a white-listed preferential tax regime that is conducive to long-term, productive investments. Sebastian Shehadi reports.

Canada's Atlantic Ocean-bordering provinces are making the most of their coastal resources, using decades of knowhow to balance economic growth with sustainability.

Ecuador's stability was recognised in 2018, as the South American country attracted its highest level of investment since 2004.

Canada has seen a four-year peak in FDI, with the technology, real estate and aerospace sectors enjoying substantial growth. Zara Fennell reports.

Australia’s proud mining history, the quality of its workers and high working standards were instrumental in bringing Canadian mining and exploration company Kirkland Lake Gold to the Victorian gold fields.

The US has granted new market access for Australian roasted macadamia nuts.

Recent South American free trade agreements will have implications for Australian agricultural exports.

Australian Hass avocados have received provisional access to the Indian market. New access was granted after Australia demonstrated that its high-quality avocados could meet India’s biosecurity and food import requirements.

Australian raw sugar exporters can take advantage of unused US quotas in 2023.

The world’s largest food and beverage (F&B) trade show – Gulfood – took place in Dubai, UAE from 19–23rd February. It brought together over 5,000 leading F&B companies. Over 120 Australian companies took part.

As of Nov. 11, the Beats Studio Pro headphones are $100 off at Target from their $349.99 list price to $249.99.

The 44mm Samsung Galaxy Watch 6 in graphite normally retails for $329.99. As of Nov. 11, it's on sale for $169.99.

Ai-Da, the humanoid robot, sold the artwork "AI God" for a whopping $1.3 million at Sotheby's. Here's how it happened.

Paul Mescal, Denzel Washington, and Pedro Pascal face off in Ridley Scott's "Gladiator II." Review.

Black Friday is still weeks away but early deals are rolling in. Kindle Book Deals are especially hot with e-books as low as $1.99.

Starting at 12 p.m. ET on Nov. 11, Walmart+ members can buy the Beats Solo3 wireless headphones for just $69.

As of Nov. 11, Chromebook deals are aplenty ahead of Black Friday 2024. Check out our top picks from Lenovo, Asus, Samsung, and others.

The best two headphones deals ahead of Black Friday are the Bose QuietComfort Ultra earbuds on sale for $229 and the Sony WH-1000XM5 headphones for $102.99 off.

As of Nov. 12, the RayNeo Air 2s AR glasses are $40 off at Amazon, now $399.99 as an early Black Friday deal.

As of Nov. 12, Apple’s latest Series 10 46mm smartwatch is now $50 off at Amazon, priced at $379.

NASA's Voyager 2 spacecraft detected an unexpected phenomenon in the environment around the planet Uranus in 1986. Years later, scientists found the cause.

Ahead of Black Friday, the Google Pixel 8 is $300 off at Amazon, down to $399 (was $699) as of Nov. 12.

Scientists conducted a genetic analysis and found that avian flu H5N1 evolved and spread efficiently between marine mammals during a recent viral outbreak, revealing a risk to other species.

Normally, a Target Circle 360 annual membership costs $99. As of Nov. 12, you can save 50% on it, dropping it to just $49 for your first year.