While adding an element created from a netlist file in AWR, I am getting the error 'The element type being dropped is not compatible with the window it is being dropped into'. The netlist file in AWR has the following contents:

.subckt BFG520W base collector emitter npn
.model BFG520W NPN(IS=1.016E-15 NF=1.000 BF=220.1 IKF=510E-3 VAF=48.06
+ ISE=2.83E-13 NE=2.035 NR=0.988 BR=100.7 IKR=2.352E-3
+ VAR=1.692 ISC=24.48E-18 NC=1.022 RB=10.00 RE=0.7753
+ RC=2.21 CJC=447.6E-15 MJC=0.07 VJC=0.1892
+ CJE=1.245E-12 TF=8.616E-12 TR=5.437E-12 mfg=NXP)

I have attached screenshots of the element BFG520W2 created due to the above netlist and the error I am getting while adding this element.

Hi everyone,

I'm currently working on my thesis, which involves a beamformer system using CMOS 65nm technology. I'm trying to use the EMX tool for EM simulation but have encountered a few problems. Before diving into my questions about EMX, let me briefly explain how I conduct EM simulations with other software (ADS).

In ADS, I use the EM simulator with the Momentum microwave engine. However, my EM layout is quite large, and the mesh generated is extremely detailed, making it difficult to simulate the entire system. As a workaround, I divide the system into smaller parts and simulate each one individually. I've attached a snapshot of my setup, which includes an amplifier and a 1-to-2 Wilkinson power divider. I've separated these circuits and placed pins to facilitate EM simulations for each. I also placed ground pins at the boundaries of each circuit to connect them to the ground plane.

Here’s the link to the image (I'm unable to upload it due to an error): https://drive.google.com/file/d/13Qn4-DvMBj_K1JQLXrTWaWZ8uaLJr15u/view?usp=sharing

Now, moving on to EMX (version 6.3). For a maximum frequency of 31 GHz, I set the edge mesh = thickness = 0.4 µm (approximately the skin depth). However, when I simulate the circuit (amplifier + divider), the mesh on the ground plane becomes very dense, which makes running the simulation impossible due to excessive memory requirements. I reverted to my ADS approach and divided the circuit into two parts, placing ports to connect them. Unfortunately, EMX doesn't allow me to place multiple edge ports on the same edge for the ground plane, which has left me confused. Here are a couple of questions I have:

1. Is breaking the circuit into smaller parts a valid approach? Given the large ground plane, the mesh size for the ground is significant, making simulations challenging. Are there any methods to manage this issue?

2. Regarding the ground pins, why can't I place multiple edge ports to connect the ground planes of both circuits as I did in ADS? If this approach is incorrect, could you suggest alternative methods for simulating individual circuits and connecting them to estimate system performance?

Any insights would be greatly appreciated. Thank you in advance for your help!

This blog describes the new capabilities in Spectre 21.1 ISR2 through which it provides support to the Voltus-XFi Custom Power Integrity Solution.(read more)

This blog introduces you to an efficient way to debug interface elements or connect modules in a mixed-signal simulation.(read more)

Hi

I have fixed a SPACING RULE (SP1) for a CLASS_DIFF_PAIR whereas for via associated to the net (DP_VIA), the DISTANCE > 60mils respect to ANY other vias (PTH, BB, TEST vias)

Now my problem is that this rules should NOT be applied for GND VIAS (STICHING VIA) which must be placed at a distance < 40mils respect to DP_VIA

How to create an exemption to the SPACING RULE (SP1)?

Hai Community,

I have a PCB board which has multiple high speed nets and I want to perform the EMI and EMC checking.

Which Cadence tool should I use for checking the EMI and EMC coupling?

Regards,

Rohit Rohan

The blog discusses Voltus InsightAI RAK that is designed to give you an accelerated start on the execution of Voltus InsightAI flow.(read more)

The world of electronics design thrives on efficient tools that bridge the gap between concept and silicon. Virtuoso Digital Implementation is a powerful ally for mixed-signal designs, which integrate both analog and digital components. This blog post will examine Virtuoso Digital Implementation's capabilities and explore how it can streamline your mixed-signal design workflow.

Virtuoso Digital Implementation in a Nutshell

Virtuoso Digital Implementation is a license package within the Cadence Virtuoso Design Platform. It offers a streamlined RTL-to-GDSII flow to implement smaller digital blocks within a mixed-signal design environment. Here's what makes Virtuoso Digital Implementation stand out:

• Focus on Small Digital Blocks: Optimized for digital blocks with an instance count of up to 50,000 (expandable to 150,000 with specific configurations), Virtuoso Digital Implementation is ideal for integrating digital logic into your analog-centric design.
• Leveraging Industry Leaders: Virtuoso Digital Implementation utilizes cut-down versions of the renowned Cadence Genus Synthesis Solution and Innovus Implementation System under the hood. This ensures you get access to proven technologies for logic optimization and place-and-route.
• Seamless Integration with the Virtuoso Environment: Virtuoso Digital Implementation's key advantage is its tight integration with the Virtuoso Layout Suite. You can launch the synthesis and place-and-route tools directly from the Virtuoso environment, eliminating the need to switch between platforms.

Benefits of Using Virtuoso Digital Implementation

 By incorporating Virtuoso Digital Implementation into your mixed-signal design flow, you can get several benefits:

• Simplified Workflow: Virtuoso Digital Implementation offers a centralized environment for both digital block implementation and layout editing within the Virtuoso environment. This reduces context switching and streamlines the design process.
• Faster Time-to-Market: Virtuoso Digital Implementation's streamlined workflow can significantly reduce design turnaround times, allowing you to get your product to market quicker.
• Improved Design Quality: Leveraging industry-leading synthesis and place-and-route engines from Cadence ensures high-quality digital block implementation within your mixed-signal design.

Who Should Consider Virtuoso Digital Implementation?

 Virtuoso Digital Implementation is a valuable tool for anyone working on mixed-signal designs with smaller digital blocks. It's particularly well-suited for:

• Analog IC designers who need to integrate digital logic into their designs.
• Circuit design teams working on mixed-signal applications like data converters, power management ICs, and RF transceivers.

Virtuoso Digital Implementation provides a compelling solution for designers working on mixed-signal projects. Its streamlined workflow, tight integration with the Virtuoso design platform, and access to proven digital design tools can significantly improve design efficiency and time-to-market. Virtuoso Digital Implementation is worth considering if you're looking to optimize your mixed-signal design flow.

I am here to help and guide you on how to learn more about Virtuoso Digital Implementation flow.

Welcome to Virtuoso Digital Implementation, an online course recently released. This course teaches implementing digital blocks using Cadence tools based on the Virtuoso Digital Implementation flow. Also, you can download a lab database after the lecture and get hands-on experience in each stage.

Want to Enroll in this Course?

We organize this Virtuoso Digital Implementation training for you as a "Blended" or "Live" training. Please reach out to Cadence Training for further information.

Register for the Online Training with the following steps:

• Log on to cadence.com with your registered Cadence ID and password.
• Select Learning from the menu > Online Courses.
• Search for Virtuoso Digital Implementation using the search bar.
• Select the course and click Enroll.

And don't forget to obtain your Digital Badge after completing the training!

Related Resources

Online Courses

• Cadence RTL-to-GDSII Flow v6.0
• Virtuoso Digital Implementation Training

Training Byte Videos

• How Do You Run Placement Optimization in the Innovus Implementation System?
• How to Run the Synthesis Without DFT?
• How to Run the Synthesis Flow with DFT?
• Creating Power Rings, Power Stripes, and Power Rails in the Innovus Implementation System
• How to Run Power Analysis and Analyze the Results in Innovus?

Happy Learning!

Power efficiency is a critical factor in the fast-evolving world of semiconductor design.

The IEEE 1801 standard, also known as UPF (Unified Power Format), was developed by the IEEE to address the intricate challenges associated with power management in contemporary semiconductor designs. This standard offers a uniform framework for defining power domains, power states, and power intent, ensuring consistency across diverse tools and phases of the design process. By utilizing UPF, you can precisely model and regulate power consumption, a critical aspect for battery-operated devices, high-performance computing, and energy-efficient designs.

The key concepts of IEEE 1801 are:

1. Power domains
2. Power states
3. Power gating and isolation
4. Power switches
5. Level shifters, isolation, and retention cells
6. Macro model

Based on these building blocks, you write the power intent of the design.

The power intent for the design includes identifying/implementing low-power strategies that provide a clear description of the power architecture of a design.

The power definitions can effectively manage power consumption and ensure the chip meets its power and performance requirements.

You can start by creating the Power Supply Network, which defines how power is supplied to the design's various power domains and logic cells.

What's the next step to build the file? How do you understand the various concepts related to IEEE 1801? How do you complete the rest of the power intent file?

Relax!

Gear up to attend the training class created just for you to dive deep into the entire format and explore this exciting power specification method/format with hands-on labs in one day!

Training

Fundamentals of IEEE 1801 Low-Power Specification Format Training

This course is a complete tutorial for understanding the fundamentals of IEEE 1801 low-power specification format concepts. You learn about IEEE 1801 power supply networks, ground ports and nets, creating and connecting supply ports/nets, power domain, power switch, power states, defining isolation and level shifter strategies, hierarchical IEEE 1801, and various versions of the IEEE 1801. You also explore how power intent information can be used for a design across various flow stages, such as functional verification, synthesis, logic equivalency checking, place-and-route, test, timing signoff, power integrity, and so forth, using Cadence^® tools.

Labs

We ensure that your learning journey is smooth with hands-on labs covering various design scenarios.

Lab Videos

Now, the exciting part is that to help you further, we have created engaging videos of the training labs. You can refer to the lab module's instructions in demo format at https://support.cadence.com.

Lab Demo: Checking Power Supply Network in IEEE 1801 format and Running IEEE 1801 Quality Checks using Conformal Low Power

Lab Demo: Checking Power Intent for The Macro Connections in IEEE 1801 Format And Running IEEE 1801 Quality Checks using Conformal Low Power 

Online Class

Here is the course link.

Get ready for the most thrilling experience with Accelerated Learning!

The more you know, the faster you go!

Grab the cycle  or hike it, based on your existing knowledge.

Take the quiz and increase your learning pace!!

What's Next?

Grab your Badge after finishing the training and flaunt the expertise you have built up. 😊

Ready to take a tour of this power specification world? Let's help you enroll in this course.

We organize this training for you as a "Blended" or "Live" training. Please reach out to Cadence Training for further information. If you want to ensure you are always the first to know about anything new in training, you can use the SUBSCRIBE button on the landing page to sign up for our regular training newsletters.

Related Short Training Bytes/Videos

Enhance the learning experience with short videos:

Genus Synthesis Solution: Video Library

 Joules RTL Power Solution: Video Library

Related Training

 Low-Power Synthesis Flow with Genus Synthesis Solution

Genus Low-Power Synthesis Flow with IEEE 1801

Related Blogs

It's the Digital Era; Why Not Showcase Your Brand Through a Digital Badge! - Digital Design - Cadence Blogs - Cadence Community

Relax in Summer with Cooler IC chips and Ice-Cream! Do you want to Explore the Recipe? - Digital Design - Cadence Blogs - Cadence Community

Power Is HOT and Touches Everything and Everybody! But the Challenge Is To Deal With Low Power During Design Synthesis; How? - Digital Design - Cadence Blogs - Cadence Community

Binge on Chip Design Concepts this Weekend! - Digital Design - Cadence Blogs - Cadence Community

The Cadence Cerebrus Intelligent Chip Explorer is a revolutionary, machine learning-driven, automated approach to chip design flow optimization. Block engineers specify the design goals, and Cadence Cerebrus will intelligently optimize the Cadence digital full flow to meet the power, performance, and area (PPA) goals in a completely automated way. Use Cerebrus Apps to optimize some aspects of the design as well.

Running a full RTL to GDSII flow, Cadence Cerebrus has a lot of possibilities and combinations of different tool settings to explore.

Using the knowledge from previous runs, combined with on-the-fly analysis within the flow, Cadence Cerebrus can assess many settings combinations and fine-tune the flow accordingly in a very efficient manner.

As technology advances, projects become bigger and way more complex than before. The ability of a single engineer to run simultaneously a large number of blocks in a traditional way is limited. Cadence Cerebrus allows a single engineer to work more efficiently and implement more blocks, while maintaining the same or even better PPA, using compute power.

Being such a revolutionary tool, integrating Cerebrus into your existing flow is surprisingly simple as it can wrap around any existing flow scripts.

Please join me in this course, to learn about the features and basics of Cadence Cerebrus Intelligent Chip Explorer.

We’ll walk through the tool setting stage, explain what is a primitive and how it effects our run, talk about the cost function and the run goals.

We’ll understand the concept of scenarios, learn how to analyze the results of the different runs, and compare them.

In addition, we’ll talk about basic debug rules and methods to analyze failures.

Sounds Interesting?

Please join our “live” one-day Cadence Cerebrus Intelligent Chip Explorer Training @Cadence Feldkirchen planned for October 9th, 2024!

For more details and registration, please contact Training Germany.

If you would like to have an instructor-led training session in another region please contact your local training department.

Become Cadence Certified

Cadence Training Services offers a digital badge for this training course. This badge indicates proficiency in a certain technology or skill and gives you a way to validate your expertise to managers and potential employers. You can highlight your expertise by adding this digital badge to your email signature or any social media platform, such as Facebook or LinkedIn.

Related Training

Innovus Block Implementation with Stylus Common UI

Related Training Bytes

Cerebrus Primitives (Video) 

How to Reuse Cerebrus (Video) 

Cerebrus - Verifying Distribution Script (Video)

How to distribute Cerebrus Scenarios (Video) 

Cerebrus Web Interface Monitor and Control (Video) 

How to Setup Cerebrus for a Successful Run (Video) 

Flow Wrapping: The Cadence Cerebrus Intelligent Chip Explorer Must Have (Webinar) (Video) 

Cerebrus Cost Functions (Video) 

Related Blogs

Training Insights: Cadence Cerebrus Webinar Recording Now Available!

Keep Up with the Revolution—Cadence Cerebrus Training

New to Equivalence Checking? Restart from the Basic Concepts

Training Insights - Free Online Courses on Cadence Learning and Support Portal

Training Insights – Important Facts You Should know About Our Cadence Learning and Support Portal

Emerging states must re-orientate their investment efforts to increasingly target those with an outsized social impact

Sustainability is gaining traction in the creative industries, with the Italian region of Trentino designing a film production rating protocol that is being considered by the EU.

London has retained its position as fDi’s European City of the Future, while Paris has climbed to second place, knocking Dublin into the third spot. 

Paris Region has kept its fDi European Region of the Future title, while Dublin Region holds on to second place and North Rhine-Westphalia is in third. 

Lower fertility rates will boost economic growth, according to a demographic model developed by Renaissance Capital. 

$73.8m mega-project will be the first of its kind in the city.

Announced greenfield projects into China plummeted in early 2020 with the US and Europe taking the lion's share of global foreign investment. 

US-led vetting and certification of big-ticket projects may go a long way to allaying western investor concerns about rule of law and transparency issues, says intelligence firm Alaco’s head of content.

Up to 18 countries across Latin America have joined China’s new Belt and Road Initiative, hoping to boost their infrastructure development and investment.  

The coronavirus pandemic could change human behaviour more permanently in future.

The fallout from the pandemic looks set to stall trade and investment to Latin America.

Utilities in Australia are looking to the sky when it comes to avoiding costly network failures and bushfires, enlisting the expertise of investors such as Canada’s Aethon Aerial Solutions to monitor power lines.

Australia’s demand for cyber services has prompted PwC Australia to open a new onshore delivery centre in Adelaide, South Australia.

Recent South American free trade agreements will have implications for Australian agricultural exports.

Australian raw sugar exporters can take advantage of unused US quotas in 2023.

Connections is a New York Times word game that's all about finding the "common threads between words." How to solve the puzzle.

Here's the answer for "Wordle" #1241 on November 11, as well as a few hints, tips, and clues to help you solve it yourself.

Starting at 12 p.m. ET on Nov. 11, Walmart+ members can buy the Beats Solo3 wireless headphones for just $69.

Starting at noon ET, Walmart+ members can score the Dyson V12 Detect Slim for just $399.99.

Google Gemini may be getting its own iOS app

Xbox Game Pass Ultimate gives gamers access to hundreds of games, exclusive deals, and more. Three-month stackable memberships are on sale for £28.35.

The NYT Strands hints and answers you need to make the most of your puzzling experience.

Answers to each clue for the November 12, 2024 edition of NYT's The Mini crossword puzzle.

Connections: Sports Edition is a New York Times word game about finding common sports threads between words. How to solve the puzzle.

Hints and answers to today's Hurdle all in one place.

Answers to each clue for the November 12, 2024 edition of Arkadium daily mini crossword on Mashable.com.

Apple now lets you share location of lost items with third parties via Find My accessories and AirTags.

Here's the answer for "Wordle" #1242 on November 12, as well as a few hints, tips, and clues to help you solve it yourself.

Connections is a New York Times word game that's all about finding the "common threads between words." How to solve the puzzle.

Jon Stewart spoke about why the Democrats lost the 2024 election during his "Daily Show" monologue.

As of Nov. 12, get the Shark Clean and Empty Cordless Vacuum for $199 at Walmart, down from its usual price of $319. That's 37% off.

Here's the answer for "Wordle" #1243 on November 13, as well as a few hints, tips, and clues to help you solve it yourself.

Connections is a New York Times word game that's all about finding the "common threads between words." How to solve the puzzle.

Australia’s landmark AI-ECTA trade deal to come into force on 29 December

Temporary changes to the Work Bonus offer an opportunity for the visitor economy to employ mature-aged workers and overcome labour shortfalls.

Austrade is seeking feedback on options to improve the Export Market Development Grants (EMDG) program.

Austrade hosted a Landing Pad for 9 First Nations businesses in Singapore. The program included activities, workshops and masterclasses on the essential tools for export success.