Hello,

I have a sensitive trace on layer 2 and I would like to prevent any routing along or across it on adjacent layers (L1 and L3).

My idea was to use a route keepout shape on L1 and L3, however that also removed the ground pour on those layers and I would like to keep the ground pour.

Can I get around this somehow or should I use something else than route keepout?

Regards,

Filip

hello.

i have asked this question a few years back but no good answer so i ask again.

i would like to spread clines with equal spacing.

i do know how to spread clines between vias.

but i would like to simply spread clines between two clines (not between two vias).

for instance, there are 4 parallel clines but the inner 3 spaces are not equal so i would like to move the inner 2 clines to make the 3 spaces equal.

regards

masa

Hi

the signal SPI_SCLK belongs to TWO Spacing CLASSES: CLS_SP_SPI and CLS_SP_SPI_CLOCK

I then assign TWO different SPACING RULES to each class : CLS_SP_SPI  > 2H and CLS_SP_SPI_CLOCK > 3.5H

Which SPACING RULE will inherit the signal SPI_SCLK ??

Is it possible to manually define the PRIORITY on Design Rules ??

Loading new netlist into 23.1 Apparently it does not like many of the specified footprints or padstacks. I have to open the footprint in 231., save the pad stack then save the footprint. This is very time consuming and frustrating to say the least.

I also get the following message

WARNING(SPMHNI-194): Symbol 'SMD_SOD123_ANODE_PIN1' used by RefDes D30 for device 'DIODE_0_SMD_SOD123_ANODE_PIN1_1N4148W-7-F' not found.

The symbol either does not exist in the library path (PSMPATH) or is an old symbol from a previous release.  

Set the correct library path if not set or use dbdo

     The current version of software is unable to open design smd_sod123_anode_pin1.

The design was last saved using version 16.5 and must be updated using DB Doctor. [help]


Going to DB Doctor does nothing, no option to update a footprint?

Tom

hello

is there a way to scale a footprint of a symbol?

scaling a footprint means moving all the pad locations of the symbol by +x% or -x%. 

regards

masa

Dear Community,

I have created a PCB layout with multiple high-speed nets, I want to check the SI like how signals are reflected and taken to each other.

I have the OrCAD X Professional, how to check the reflection and crosstalk using the OrCAD X Professional software version 24.1.

I want to create a topology flow to the PCB layout and perform the reflection and crosstalk.

Regards,

Rohit Rohan

Dear Community,

In OrCAD X Profession, the workspace feature enables the users to store the libraries (Schematic Symbol, Footprint and PSpice Models) and Designs (Schematic and PCB layout) in the cloud workspace.

But storing these libraries and design are stored in servers in the USA, Europe, Asia and Japan Servers.

I don't want to store my designs in any of these servers instead I want to create the workspace in my local PC and store all my libraries and designs in the local workspace.

Is this possible, if possible then can anyone provide the steps/procedure or videos of how to do it?

Regards,

Rohit Rohan

Dear Community,

I have created a PCB board and let's say I have found some parts of the PCB board where there are impedance issues, then how to resolve that impedance issue using the OrCAD X Professional.

Regards,

Rohit Rohan

In the era of Artificial Intelligence, front-end designers need a magical key to empower them with technology that enables fully optimized RTL for implementation handoff and provides RTL designers with capabilities to accurately assist in the implementation convergence process.

The magic lies with Cadence Joules RTL Design Studio, an expert system that leverages generative AI for RTL design exploration, triages possible causes of violations, and additional insights that empower designers to understand how to address issues in their RTL, leading to smarter and more efficient chip design.

This unlocks the immense debugging and design analysis capabilities from a single, unified cockpit, enabling fully optimized RTL design prior to implementation handoff for the front-end designers and addresses all aspects of physical design by adding visibility into power, performance, area, and congestion (PPAC)

One critical component is the clock tree, which distributes the clock signal to all sequential elements, such as flip-flops and latches. Designers need the right techniques in the beginning stage to optimize the clock tree structure, ensuring that their designs meet the required timing specifications, reduce power consumption, maintain signal integrity, and increase reliability.

 This incredible feature is part of the Joules RTL Design Studio.

How do you efficiently explore the clock tree structure to optimize the results using Joules RTL Design Studio?

Joules Studio allows viewing a simplified version of the clock structure. This feature is primarily designed to help display clock frequency scaling through clock dividers. You can customize colors, symbols, and design elements using an input file. Additionally, you can cross-probe the custom clock tree structure to other widgets and the main schematic view in Joules Studio.

Moreover, with the clock tree preference features of the ideal clock tree wizard in Joules Studio GUI, you can highlight clock path, generate clocks and master clock, set case analysis, fold and unfold instances, undo and redo, set sense and disable timing, color preference, etc.

You can binge on these features through the channel videos posted on the support portal, which covers the Joules RTL Design Studio GUI Clock Tree Structure and Features of Ideal Clock Tree Wizard.

You can refer to the videos on Cadence Online Support (Cadence login required).

​Video Links:
Viewing Custom Clock Tree Structure in Joules RTL Design Studio (Video) 

Exploring Clock Tree Preference Widget of Ideal Clock Tree Wizard in Joules RTL Design Studio (Video) 

Want to learn more?

Explore the one-stop solution Joules RTL Design Studio Product Page on Cadence Online Support (Cadence login required).

Related Resources 

Related Training Bytes:

Understanding Prototype Design Flow in Joules RTL Design Studio (Video)

Running Prototype Implementation Flow in Joules RTL Design Studio (Video)

Understanding Analyze Timing By Hierarchy In Joules RTL Design Studio (Video)

Related Courses:

• Joules Power Calculator

Want to Enroll in this Course?

We organize this training for you as a "Blended" or "Live" training. Please reach out to Cadence Training for further information.

Please don't forget to obtain your Digital Badge after completing the training.

Related Blogs:

Let's Discover the Secret to Enhance Design's PPAC in a Single Cockpit! - Digital Design - Cadence Blogs - Cadence Community

Joules RTL Design Studio: Accelerating Fully Optimized RTL - Digital Design - Cadence Blogs - Cadence Community

Let's Replay the Process of Power Estimation with the Power of 'x'! - Digital Design - Cadence Blogs - Cadence Community

Is Design Power Estimation Lowering Your Power? Delegate and Relax! - Digital Design - Cadence Blogs - Cadence Community

The EU is considering a broader mandate for the EBRD, and its president, Sir Suma Chakrabarti, believes its model would work in sub-Saharan Africa.

Authorities in the US, the EU and across the developed world are stepping up efforts to scrutinise foreign investment on the grounds of both national security and tech sovereignty.

Sustainability is gaining traction in the creative industries, with the Italian region of Trentino designing a film production rating protocol that is being considered by the EU.

London has retained its position as fDi’s European City of the Future, while Paris has climbed to second place, knocking Dublin into the third spot. 

London is crowned best major city in Europe in fDi's FDI Strategy category, with Glasgow, Vilnius, Reykjavik and Galway also winning out.

Paris Region has kept its fDi European Region of the Future title, while Dublin Region holds on to second place and North Rhine-Westphalia is in third. 

Having opened new production facilities in Rwanda and South Africa, Mara Phones is looking to alter Africa's mindset from being a 'consumer' to being a 'manufacturer'. 

Despite its thriving automotive sector, Gothenburg is vulnerable to global economic pressures. However, local authorities are confident that their strategies will see the city ride out the uncertainties related to Brexit and the US-China trade wars.

Bradford has been rated as the most improved city by the Good Growth for Cities 2019 index, while Oxford remained the highest performing UK city.

Lower fertility rates will boost economic growth, according to a demographic model developed by Renaissance Capital. 

Escalation in protests across the globe in 2019 are forecast to persist into the new decade, according to Verisk Maplecroft report.

German chemical giant BASF has begun construction of its $10bn mega project in southern China, which will be the country’s first wholly foreign-owned chemical complex. 

Kyrgyzstan is trying to stabilise a volatile business environment by diversifying its economy away from gold and remittances, and employing an ombudsman to reassure investors. 

Sardar Popalzai, president of the Balochistan Economic Forum, talks about the blue economy and the Pakistani province’s tourism potential.

The fallout from the pandemic looks set to stall trade and investment to Latin America.

Ford's bestselling F-150 full-size pickup truck receives minor changes for the 2025 model year, including some removal of standard equipment on certain trim levels in exchange for lower starting prices. Ford also rolls out BlueCruise 1.4 and expands the availability of the latest iteration of its limited hands-free driving system. The base F-150...

Cadillac Vistiq revealed as brand's “globally sized” electric three-row SUV Vistiq comes standard with 615 hp and 102 kwh Pricing starts at $78,790, including destination Cadillac's expansion of its electric vehicle lineup continues with the arrival of the 2026 Vistiq, a midsize SUV with third-row seats designed to fill the gap between...

Rustam Issatayev, deputy CEO of Kazakhstan’s national investment promotion agency, talks to fDi about the country’s new FDI strategy, which involves a proactive approach to attracting investment instead of simply talking up the country.

As the Digital Kazakhstan programme creates an environment conducive to innovation, start-up hubs are springing up across the country. Their task? To move the economy beyond commodities and make the country a regional centre of innovation. 

Pedro Calado, vice-president of Madeira’s regional government, tells Sebastian Shehadi about the island's capacity for more upmarket tourism and its ongoing struggle to gain financial independence from Portugal. 

Canada's Atlantic Ocean-bordering provinces are making the most of their coastal resources, using decades of knowhow to balance economic growth with sustainability.

Cyprus’s record-breaking 2018 was driven by tourism and second-tier cities. 

The Mexican Government has suspended tariffs on a range of agricultural and fishery products.

New rule changes mean Australian dairy establishments exporting to Chile will no longer be required to undergo periodic in-country audits by Chilean officials.

Saudi Arabia’s Vision 2030 identifies mining as a key component of the Kingdom’s industry strategy. This will open major opportunities for Australian companies in the mining, equipment, technology and services (METS) sector.

Global energy prices have eased, but Australian farmers will continue to pay elevated prices for fertiliser and diesel.

This article examines the key drivers of price volatility for vegetable oils and cereals, and the implications for Australian exporters.

As of Nov. 11, the Beats Studio Pro headphones are $100 off at Target from their $349.99 list price to $249.99.

The 44mm Samsung Galaxy Watch 6 in graphite normally retails for $329.99. As of Nov. 11, it's on sale for $169.99.

"Dune: Prophecy" premieres November 17 at 9 p.m. ET on HBO and Max. Read Mashable's review.

The trailer for the Mission: Impossible – The Final Reckoning sees Tom Cruise returning for the eighth instalment of the action franchise.

Starting at noon ET on Nov. 11, Walmart+ members can buy a Keurig K-Express Essentials single-serve coffee maker for just $29.88.

The Apple Watch Series 10 is on sale for $50-off at this early Black Friday deal at Walmart.

Starting at noon ET, Walmart+ members can score the Dyson V12 Detect Slim for just $399.99.

Here's who Elon Musk is considering for a Donald Trump administration that benefits him and his companies like Tesla and SpaceX.

Disney+'s 2025 slate also includes new seasons of 'Andor' and 'Percy Jackson and the Olympians,' and originals like 'Chad Powers.'

The Shark Pet Pro cordless stick vacuum is just $144 at Walmart, down from the normal price of $249.99. That's a 42% discount.