Starting SPB 23.1, Allegro X APD lets you import/export the symbol and component properties by using Die Text-In/Out wizards. 

Exporting the symbol 

You can export the symbol by using File > Export > Die Text-Out Wizard. 

In the Die Text-Out Wizard window, you can see the newly added options, that is, Component Properties and Symbol Properties. 

This entire information including the properties will be saved in a text file. 

Importing the symbol 

You can import the same text file in Allegro X APD by using Die Text-In Wizard. 

Choose the text file you want to import. 

Symbol properties added in the text file will be visible in the Die Text-In Wizard window. 

hello, help me!

There are many change in the bump design. I want to design bump by APD.

The bump(die) is a stagger , create it by die generator. 

Because，the pin is not isometric. In order to RDL routing, so the bump is not isometric.

I move the symbol pin in APD symbol edit（as show in the picture）,  and selected symbol RBM write device file, write library symbol.

Export the bga text( bga text out) ,But the bump is not modified, the bump is still stagger.

Can you help me!

pitch2> pitch1

thanks

In a package design, designers often need to perform degassing. This is typically done at the end of the design process before sending the design to the manufacturer.

Degassing is a process where you perforate power planes, voltage planes, and filled shapes in your design. Degassing holes let the gas escape from beneath the metal during manufacturing of the substrate. The perforations or holes for degassing are generally small, having a specified size and shape, and are spaced regularly across the surface of the plane. If the degassing process is not done, it may result in the formation of gas bubbles under the metal, which may cause the surface of the metal to become uneven. After you degas the design, it is recommended to perform electrical verification.

Allegro X APD has degassing features that allow users to automate the process and place holes in the entire shape.

In today’s topic, we will talk about how to avoid adding  degassing holes on a particular shape.

Sometimes, a designer may need to avoid adding degassing holes to a particular shape on a layer. All other shapes on the layer can have degassing holes but not this shape. Using the Layer Based Degassing Parameters option, the designer can set the degassing parameters for all shapes on the layer. Now, the designer would like to defer adding degassing holes for this particular shape.

You may wonder if there is an easy way to achieve this. We will now see how this can be done with the tool.

Once the degassing parameters are set, performing Display > Element on any of the shapes on that layer will show the degassing parameters set.

You can apply the Degas_Not_Allowed property to a shape to specify that degassing should not be performed on this shape, even if the degassing requirements are met. Select the shape and add the property as shown below.

Switch to Shape Edit application mode (Setup > Application mode > Shape Edit) and window-select all shapes on the layer. Then, right-click and select Deferred Degassing > All Off.

Now, all shapes on the layer will have degassing holes except for the shape which has the Degas_Not_Allowed property attached to it.

The course "Jasper Formal Fundamentals v24.03" introduces formal analysis to those who want to use formal analysis for design or verification. 

To optimally benefit from this course, you must already have sufficient knowledge of the System Verilog assertions to be capable of writing properties for formal verification. Hence, this training provides a module on formal analysis to help cover this essential background. 

In this course, you will learn how to code efficient SVA Properties for formal analysis, understand formal complexity and how to overcome it, and learn the basics of formal coverage.

After completing this course, you will be able to:

• Define reusable, functionally correct SVA properties that are efficient for formal tools. These shall use abstract auxiliary code to simplify descriptions, make code maintenance easier, reduce debug time, and reduce tool-proof runtime.
• Set up, run, and analyze results from formal analysis.
• Identify designs upon which formal is likely to be successful while understanding formal complexity issues and how to identify and overcome them.
• Use a systematic property development process to approach a completely new verification problem.
• Understand the basics of formal coverage.

 The most recently updated release includes new modules on:

• "Basic complexity handling" which discusses the complexity in formal and how to identify and handle them.
• "Complexity reduction methods” which discusses the complexity reduction methods and which is suitable for which type of complexity problem.
• “Coverage in formal” which discusses the basics of coverage in formal verification and how coverage can be used in formal.   

Take this course to learn the basics of formal verification. 

What's Next? 

You can check out the complete training: Jasper Formal Fundamentals. There is a free online version of the training available 24/7 for all customers with a Cadence Learning and Support Portal account. If you are interested in an instructor-led version of the training, please contact Cadence Training. And don't forget to obtain your digital badge after completing the training!

You can also check Jasper University page for more materials on formal analysis and Jasper apps. 

Related Trainings 

Jasper Formal Expert Training Course | Cadence

Verilog Language and Application Training Course | Cadence

SystemVerilog for Design and Verification Training Course | Cadence

SystemVerilog Assertions Training Course | Cadence

Related Training Bytes 

Jasper Formal Property Verification (FPV) App: Basic Usage Demo (Video)

Jasper Formal Methodology playlist

Related Training Blogs

It’s the Digital Era; Why Not Showcase Your Brand Through a Digital Badge!

Training Insights: Introducing the C++ Course for All Your C++ Learning Needs!

Training Insights: Reaching Your Verification Closure Using Verisium Manager

Training Insights - Free Online Courses on Cadence Learning and Support Portal

Cadence PCIe/CXL VIP support for Partial Header Encryption in Integrity and Data Encryption.(read more)

Cadence Protium prototyping platforms rapidly bring up an SoC or system prototype and provide a pre-silicon platform for early software development, SoC verification, system validation, and hardware regressions. In this Training W ebinar, we will explore debugging using Save/Restart on Protium X2 . This feature saves execution time and lets you focus on actual debugging. The system state can be saved before the bug appears and restartS directly from there without spending time in initial execution. We’ll cover key concepts and applications, explore Save/Restart performance metrics, and provide examples to help you understand the concepts. Agenda: The key concepts of debugging using save/restart Capabilities, limitations, and performance metrics Some examples to enable and use save/restart on the Protium X2 system Date and Time Thursday, November 7, 2024 07:00 PST San Jose / 10:00 EST New York / 15:00 GMT London / 16:00 CET Munich / 17:00 IST Jerusalem / 20:30 IST Bangalore / 23:00 CST Beijing REGISTER To register for this webinar, sign in with your Cadence Support account (email ID and password) to log in to the Learning and Support System*. Then select Enrol to register for the session. Once registered, you’ll receive a confirmation email containing all login details. A quick reminder: If you haven’t received a registration confirmation within 1 hour of registering, please check your spam folder and ensure your pop-up blockers are off and cookies are enabled. For issues with registration or other inquiries, reach out to eur_training_webinars@cadence.com . Want to See More Webinars? You can find recordings of all past webinars here Like This Topic? Take this opportunity and register for the free online course related to this webinar topic: Protium Introduction Training The course includes slides with audio and downloadable lab exercises designed to emphasize the topics covered in the lecture. There is also a Digital Badge available for the training. Want to share this and other great Cadence learning opportunities with someone else? Tell them to subscribe . Hungry for Training? Choose the Cadence Training Menu that’s right for you. To view our complete training offerings, visit the Cadence Training website . Related Courses Protium Introduction Training Course | Cadence Palladium Introduction Training Course | Cadence Related Blogs Training Insights – A New Free Online Course on the Protium System for Beginner and Advanced Users Training Insights – Palladium Emulation Course for Beginner and Advanced Users Related Training Bytes Protium Flow Steps for Running Design on Protium System ICE and IXCOM mode comparison ICE compile flow IXCOM compile flow PATH settings for using Protium System Please see the course learning maps for a visual representation of courses and course relationships. Regional course catalogs may be viewed here

As a verification engineer, you’re surely looking for ways to automate the debugging process. Have you developed your own scripts to ease specific debugging steps that tools don’t offer? Working with scripts locally and manually is challenging—so is reusing and organizing them. What if there was a way to create your own app with the required functionality and register it with the tool? The answer to that question is “Yes!” The Verisium Debug Python App Store lets you instantly add additional features and capabilities to your Verisium Debug Application using Python Apps that interact with Verisium Debug via the Python API. Join me, Principal Education Application Engineer Bhairava Prasad, for this Training Webinar and discover the Verisium Debug Python App Store. The app store allows you to search for existing apps, learn about them, install or uninstall them, and even customize existing apps. Date and Time Wednesday, November 20, 2024 07:00 PST San Jose / 10:00 EST New York / 15:00 GMT London / 16:00 CET Munich / 17:00 IST Jerusalem / 20:30 IST Bangalore / 23:00 CST Beijing REGISTER To register for this webinar, sign in with your Cadence Support account (email ID and password) to log in to the Learning and Support System*. Then select Enroll to register for the session. Once registered, you’ll receive a confirmation email containing all login details. A quick reminder: If you haven’t received a registration confirmation within one hour of registering, please check your spam folder and ensure your pop-up blockers are off and cookies are enabled. For issues with registration or other inquiries, reach out to eur_training_webinars@cadence.com . Like this topic? Take this opportunity and register for the free online course related to this webinar topic: Verisium Debug Training To view our complete training offerings, visit the Cadence Training website Want to share this and other great Cadence learning opportunities with someone else? Tell them to subscribe . Hungry for Training? Choose the Cadence Training Menu that’s right for you. Related Courses Xcelium Simulator Training Course | Cadence Related Blogs Unveiling the Capabilities of Verisium Manager for Optimized Operations - Verification - Cadence Blogs - Cadence Community Verisium SimAI: SoC Verification with Unprecedented Coverage Maximization - Corporate News - Cadence Blogs - Cadence Community Verisium SimAI: Maximizing Coverage, Minimizing Bugs, Unlocking Peak Throughput - Verification - Cadence Blogs - Cadence Community Related Training Bytes Introducing Verisium Debug (Video) (cadence.com) Introduction to UVM Debug of Verisium Debug (Video) (cadence.com) Verisium Debug Customized Apps with Python API Please see course learning maps a visual representation of courses and course relationships. Regional course catalogs may be viewed here . *If you don’t have a Cadence Support account, go to Cadence User Registration and complete the requested information. Or visit Registration Help .

Is there a way to generate coverage reports, not in ucd or any other format. I have written basic covergroup and passed arguments[-covoverwrite -cov_cgsample -cov_debuglog -coverage u] to the xrun command, however I don't see anything in sim directory, nor do I see anything in the logs indicating the covergroups have been hit. How can I confirm that cover groups are getting hit and essentially observe the bins. In Questa sim, you essentially get them as part of the log itself.

This is the 16th installment of The Rationalist, my column for the Times of India.

Steven Pinker, in his book Enlightenment Now, relates an old Russian joke about two peasants named Boris and Igor. They are both poor. Boris has a goat. Igor does not. One day, Igor is granted a wish by a visiting fairy. What will he wish for?

“I wish,” he says, “that Boris’s goat should die.”

The joke ends there, revealing as much about human nature as about economics. Consider the three things that happen if the fairy grants the wish. One, Boris becomes poorer. Two, Igor stays poor. Three, inequality reduces. Is any of them a good outcome?

I feel exasperated when I hear intellectuals and columnists talking about economic inequality. It is my contention that India’s problem is poverty – and that poverty and inequality are two very different things that often do not coincide.

To illustrate this, I sometimes ask this question: In which of the following countries would you rather be poor: USA or Bangladesh? The obvious answer is USA, where the poor are much better off than the poor of Bangladesh. And yet, while Bangladesh has greater poverty, the USA has higher inequality.

Indeed, take a look at the countries of the world measured by the Gini Index, which is that standard metric used to measure inequality, and you will find that USA, Hong Kong, Singapore and the United Kingdom all have greater inequality than Bangladesh, Liberia, Pakistan and Sierra Leone, which are much poorer. And yet, while the poor of Bangladesh would love to migrate to unequal USA, I don’t hear of too many people wishing to go in the opposite direction.

Indeed, people vote with their feet when it comes to choosing between poverty and inequality. All of human history is a story of migration from rural areas to cities – which have greater inequality.

If poverty and inequality are so different, why do people conflate the two? A key reason is that we tend to think of the world in zero-sum ways. For someone to win, someone else must lose. If the rich get richer, the poor must be getting poorer, and the presence of poverty must be proof of inequality.

But that’s not how the world works. The pie is not fixed. Economic growth is a positive-sum game and leads to an expansion of the pie, and everybody benefits. In absolute terms, the rich get richer, and so do the poor, often enough to come out of poverty. And so, in any growing economy, as poverty reduces, inequality tends to increase. (This is counter-intuitive, I know, so used are we to zero-sum thinking.) This is exactly what has happened in India since we liberalised parts of our economy in 1991.

Most people who complain about inequality in India are using the wrong word, and are really worried about poverty. Put a millionaire in a room with a billionaire, and no one will complain about the inequality in that room. But put a starving beggar in there, and the situation is morally objectionable. It is the poverty that makes it a problem, not the inequality.

You might think that this is just semantics, but words matter. Poverty and inequality are different phenomena with opposite solutions. You can solve for inequality by making everyone equally poor. Or you could solve for it by redistributing from the rich to the poor, as if the pie was fixed. The problem with this, as any economist will tell you, is that there is a trade-off between redistribution and growth. All redistribution comes at the cost of growing the pie – and only growth can solve the problem of poverty in a country like ours.

It has been estimated that in India, for every one percent rise in GDP, two million people come out of poverty. That is a stunning statistic. When millions of Indians don’t have enough money to eat properly or sleep with a roof over their heads, it is our moral imperative to help them rise out of poverty. The policies that will make this possible – allowing free markets, incentivising investment and job creation, removing state oppression – are likely to lead to greater inequality. So what? It is more urgent to make sure that every Indian has enough to fulfil his basic needs – what the philosopher Harry Frankfurt, in his fine book On Inequality, called the Doctrine of Sufficiency.

The elite in their airconditioned drawing rooms, and those who live in rich countries, can follow the fashions of the West and talk compassionately about inequality. India does not have that luxury.

The India Uncut Blog © 2010 Amit Varma. All rights reserved.
Follow me on Twitter.

Read on to know about the Operating Point Parameters Summary window that gives you a one-stop view of the categorized and tabulated details on all operating point parameters in your design. This window improves your review cycle with its many benefits.(read more)

Designers have long recognized the need to analyze the reliability of ICs. Two commonly used approaches for performing reliability analysis include calculating the change in device degradation and relying on safe operating checks in circuit simulators. 

With the advent of the ever-increasing use of ICs in mission-critical applications, the need for reliable reliability analysis has become of paramount importance. Over the years, you have been using reliability analysis in Virtuoso ADE Assembler and Virtuoso ADE Explorer to measure and review aging effects, such as device characteristic degradations, model parameter changes, self-heating effects, and so on.

Reliability analysis can be performed using two modes: Spectre native and RelXpert. The reliability analysis analyzes the effect of time on circuit performance drift and predicts the reliability of designs in terms of performance. In ADE Assembler, you can run the reliability simulation for fresh test (when time is zero), stress test (to generate degradation data), and aged test (at specific intervals, such as one year, three years, or 10 years). In the stress test, extreme environmental conditions are used to stress devices before aging analysis.

The following figure shows the reliability simulation flow.

The Reliability Options form has the following four tabs: 

• Basic: Enables you to specify analysis type, aging options, start and stop time of reliability simulation, and options related to device masking, degradation ratio, and lifetime calculation. 

• Modeling: Enables you to choose the modeling type you want to use during reliability simulation. 

• Degradation: Enables you to specify the options to print device and subcircuit degradation information into a .bt0 file. 

• Output: Enables you to specify the degradation reports to be generated and methods to filter degradation results in the reports.

While the Basic and the Output tabs are used by design engineers, the Modeling and the Degradation tabs are primarily used by model developers.

Reviewing degradation reports in text or XML formats can be a tiresome exercise because degradation data can be large and can contain a large number of instances due to advanced technology nodes and post-layout simulations. For you to work effectively and interactively with these reports, the new reliability report is based on the SQLite database, which adds the benefit of improved performance and capabilities of sorting and filtering reliability data using SQLite operators.

As they say, watching this in action might help you more than reading about it, so please take a look at our Training Bytes video channel, which offers many helpful videos on how to run Reliability Analysis in Virtuoso Studio.

All the related videos are linked together in a channel so that you can easily access and watch as many as you like.

Reliability Analysis in Virtuoso Studio

Want to Learn More?

For lab instructions and a downloadable design, enroll for the online training courses of your interest on

Reliability Analysis in Virtuoso Studio vIC23.1 (Online)

 Training is also available as "Blended" or "live" class.

Digital Badge Available

You can become Cadence Certified once you complete the course (s) and share your knowledge and certifications on social media channels. Go straight to the course exam at the Learning and Support Portal.

Note: Some of the above links are accessible only to Cadence customers who have a valid login ID for the Cadence Learning and Support Portal.

Do You Have Access to the Cadence Support Portal?

If not, follow the steps below to create your account.

• On the Cadence Support portal, select Register Now and provide the requested information on the Registration page.
• You will need an email address and host ID in order to sign up.
• If you need help with registration, contact support@cadence.com.

To stay up-to-date with the latest news and information about Cadence training and webinars, subscribe to the Cadence Training emails.

If you have questions about courses, schedules, online, public, or live onsite training, reach out to us at Cadence Training.

Related Resources

About Knowledge Booster Training Bytes

Knowledge Booster Training Bytes is an online journal that relays information about Cadence Training videos, online courses, and upcoming webinars that are available in the Learning section of the Cadence Learning and Support portal. This blog category brings you direct links to these videos, courses, and other related material on a regular basis.

Niyati Singh

On behalf of the Cadence Training team

Virtuoso Studio IC23.1 ISR7 production release is now available for download.(read more)

During a mixed-signal simulation, the analog engine usually dominates the simulation time and resources. If you need to run only the analog engine in several windows, or if you would like to to run multiple tests of the same circuit with different stimuli or test pattern, then you need to run the simulation multiple times. View this blog to know more about the the two advanced technologies that Spectre AMS Designer provides to help you improve the efficiency of your mixed-signal designs and to increase the simulation speed.(read more)

This blog describes an efficient way to name the histories saved by the simulation runs in Virtuoso ADE Assembler.(read more)

Read this blog to know how you can easily create and insert connect modules using Spectre AMS Designer with the Verilog-AMS standard language defined by Accellera. (read more)

Virtuoso Studio IC23.1 ISR8 production release is now available for download.(read more)

Read this blog to know more about the innovation behind Universal Connect Modules (UCM).(read more)

This blog explores how Virtuoso Studio Net Tracer can help you perform a design review.

We’ll use the net connectivity option, which allows the user to get a clean highlighted net. You can use the Net Tracer tool to highlight the nets. You can find the Net Tracer command under the connectivity pulldown menu in the layout window.

Trace manager and the ability to display different islands on the same net with other colors, you can identify and connect the unconnected islands as you wish.

The Net Tracer utility traces the nets in the physical view (layout). The trace is a highlighted net, which is a non-selectable object. The Net Tracer utility is available from Virtuoso Layout Suite XL onwards. You can use this utility based on your specific needs and preferences.

For a better understanding of the Net Tracer feature, let’s see one scenario between the circuit designer and layout engineer for a layout design review.

Circuit designer: Can we go through the routed input nets “inm” and “inp”?

Layout engineer: From the below layout view where they are highlighted using the XL connectivity, today I will use Net Tracer utility for the design review.

Circuit designer: I have never heard of this feature. Let's see how it works.

Layout engineer: Sure, now we turn on the Net Tracer toolbar using the below option.

You see the Net Tracer options form here:

As you can see on my screen, I have opened the layout view and engaged the Net Tracer utility.

Net Tracer allows shapes to be traced on a net in two tracing modes, namely, physical and logical, where shapes on the same net are physically or logically connected.

Physical tracing gathers all the shapes physically connected on the same net.

Logical tracing gathers all the shapes assigned to the same net. It highlights the net as in the source design (schematic). It will highlight shapes on the same net, even if they are isolated shapes that are not physically connected.

For this scenario, let us use physical tracing for input nets “inm” and “inp."

Highlighted nets are shown below:

Net “inm”                    Net “inp”                   Nets “inm” and “inp” 

Net Tracer has features like physical and logical tracing, preview, step-by-step mode, ease of tracing a net on a shape out of multiple underlying shapes, and so on.

Let us explore logical tracing for output nets “outm” and “outp”:

Here, you can see how to enable true color and halo before enabling logical tracing to identify the metal route. After enabling the true color halo, enable the logical trace.

Here, I am opening the trace manager to search “outm” and “outp” and click trace. That will trace the particular nets as shown.

Net Tracer has a preview feature, which is helpful in terms of the number of previewed objects. This preview capability hints at how the trace would appear when you create it. This useful feature in Virtuoso Studio highlights both completed and incomplete nets, helping the user better understand the status of the highlighted nets.

Circuit designer: Thanks for the design review. You have done good work. Net Tracer clearly shows both types of tracing, and it was even easy for the circuit designer to understand.

Layout engineer: Let me share the link to the Net Tracer RAK, where other layout engineers can explore many more amazing features of the Net Tracer.

Do You Have Access to the Cadence Support Portal?

If not, follow the steps below to create your account.

• On the Cadence Support portal, select Register Now and provide the requested information on the Registration page.
• You will need an email address and host ID to sign up.
• If you need help with registration, contact support@cadence.com.

To stay up to date with the latest news and information about Cadence training and webinars, subscribe to the Cadence Training emails.

If you have questions about courses, schedules, online, public, or live onsite training, reach out to us at Cadence Training.

For any questions, general feedback, or future blog topic suggestions, please leave a comment.

Become Cadence Certified

Cadence Training Services now offers digital badges for this training course. These badges indicate proficiency in a certain technology or skill and give you a way to validate your expertise to managers and potential employers. You can highlight your expertise by adding these digital badges to your email signature or any social media platform, such as Facebook or LinkedIn. To become Cadence Certified, you can find additional information here.

Related Resources

About Knowledge Booster Training Bytes

Knowledge Booster Training Bytes is an online journal that relays information about Cadence Training videos, online courses, and upcoming webinars that are available in the Learning section of the Cadence Learning and Support portal. This blog category brings you direct links to these videos, courses, and other related material on a regular basis.

Sandhya.

On behalf of the Cadence Training team

Virtuoso Studio IC23.1 ISR9 production release is now available for download.(read more)

Welcome back to the Doc Assistant A-Z blog series!

Since the launch of Doc Assistant, we've been gathering feedback and input from our customers regarding their experiences with our latest documentation viewer. My interaction with Ralf was particularly useful and interesting.

Ralf is a design engineer who works on complex schematics and intricate layouts. For each release, he is challenged with the task of verifying the tool and feature changes across multiple releases. He shared with me that he has been using Doc Assistant’s capabilities to help him achieve this.

Ralf explained that he utilizes Doc Assistant to open and compare documents from different releases side-by-side, seamlessly tracking updates across multiple releases and verifying those updates in his Cadence tools. Additionally, in Doc Assistant’s online mode, he compares documents across previous tool versions, ensuring a thorough review of any changes. Finally, he was happy to share with me that Doc Assistant features have helped him significantly reduce the time he spends on identifying such changes.

You, of course, can also achieve such productivity gains using several Doc Assistant features designed to help simplify such tasks!

In previous editions of this blog series, we looked at some key features and benefits of Doc Assistant. If you've missed these editions, I would highly recommend that you read them:

• Doc Assistant A-Z: Making the Most of the Cadence Cloud-Based Help Viewer: Part 1
• Doc Assistant A-Z: Making the Most of the Cadence Cloud-Based Help Viewer: Part 2
  

In this third installment, we're diving into some more of Doc Assistant's key capabilities.

To learn more about how to use the above features, check out the Doc Assistant User Guide.

These are just a few of the productivity gain features in Doc Assistant. We’ll cover more in the next blog in the series.

Want to Know More?

If you have any feedback on Doc Assistant or would like to request more information or a demo, please contact docassistant.support@cadence.com.

Subscribe to receive email notifications about our latest Custom IC Design blog posts.

Happy reading!

- Priya Sriram, on behalf of the Doc Assistant Team

Virtuoso Studio IC23.1 ISR10 production release is now available for download.(read more)

Hello..

I'm updating part in part editor in orcad capture, and I wonder how to align pin numbers using menu or tcl/tk command.

Please, let me know. Thank you.

Allegro part of DPI does not support scaling above 150%

Hello. I am using Cadence 17.4 tools. When I open a package symbol (.dra) or board file (.brd) in Allegro that was created in an older version of the tool I get a message like this one (as expected):

"The design created using release 17.2 will be updated for compatibility with the current software..."

If I create a symbol or board file from scratch in the 17.4 tool then open it later, I get the same message. (always referring to version 17.2 which is the previous version I was using here).

So far this has not caused me any problems, but I would like to understand why it is doing this in case I have something setup incorrectly.

I only have version 17.4 installed. I am not exporting to a downrev version when I save (i.e. not using File->Export->Downrev design…) and in User Preferences->Drawing I don’t have anything selected for database_compatibility_mode. What else might I check?

FYI here is the tool version information that I see after selecting Help->About Symbol:

OrCAD PCB Designer Standard 17.4-2019 S012 [10/26/2020] Windows SPB 64-bit Edition

Thanks -Jason

Hi,

I have a LEF file with simple definitions of pad design which uses M8, M9, and AP layers. However, I failed to import the design with CIW > Import > LEF... as I encountered "ERROR: (OALEFDEF-90019): Ignoring the line 30 in the layer map file ... as it contains a syntax error. Each entry in the layer map file must have two values, LEFLayerName and OALayerNumber separated by a blank space." All lines in the file report the same OALEFDEF-90019 error.

The tech.layermap file looks like this:


# techLayer       techPurpose     stream# dataType

ref drawing 0 0
DNW drawing 1 0
PW drawing 2 0

Hi, 

When I try to run Monte Carlo it gives me a 3 items message for possible failure:

1. It says the machine selected in the current job setup policy isnot reachable

2. The Cadence hierarchy is not detected, not installed properly. or

3. Job start script (with a path and a name like swiftNetlistService#) is not found on the remote machines.

Any recommendation on how to fix this?

I want to use PSpice model (download from TI) in Virtuoso , but it can not work. Please help me to check the error message, Thanks

ADE-> Setup-> simulation files->Pspice  Files  /TPS628502-Q1_TRANS.LIB

Parse error before token ']' in expression '[[STEADY_STATE]*0.6]'. If '[[STEADY_STATE]*0.6]'  is a spice expression, quotes are required for the expression.

ERROR(SFE-46): An instance of 'TPS628502-Q1_TRANS'  can have at most 8 terminals (but has 9).

*****************************************************************************
.SUBCKT TPS628502-Q1_TRANS COMP_FSET EN FB GND PG SW SYNC_MODE VIN
+ PARAMS: STEADY_STATE=0
V_U9_V45 U9_N16725824 0 5
E_U9_ABM22 U9_N16725392 0 VALUE { V(FREQ)*1e-12 }
X_U9_U161 U9_N16849713 U9_N16846056 one_shot PARAMS: T=20

Hi

I have a rather strange question - is there a way to tell layout XL to NOT place the error/warning markers on a design when I open a cell?  I do a lot of my layout by using arrays from placed instances and create mosaics that completely ignore the metadata that Layout XL uses with its bindings with schematic (and instances get deleted etc. but I do like using it to generate all my pins etc.) and it's just really annoying when I open a design that I know is LVS clean and since the connectivity metadata is all screwed up (because I did not use it to actually complete the layout) I have a design that's just blinking at me at every gate, source and drain.  I typically delete them at the high level heirarchically but the second I go in and modify something and come back up it places all of them again.  I know that if I flatten all the p cells it goes away but sometimes it's nice to have that piece of metadata but that's about it.  Is there a way to "break" the features of XL like this?  I realize what a weird question this is but it's becoming more of an issue since we moved to IC 23 from IC 6 where there is no longer a layout L that I can use free from these annoyances that can't use any of the connectivity metadata.

Thanks

Chris

I exported vplan to .odf file in vManager and after editing it I imported it to vManager. The vplan was expected to be synchronized and updated. However, nothing has changed to it. Does anyone know why?

Hi all, I've trained a device model with the approach of an artificial neural network, and it shows well fit. 

May I know how to transfer the trained model to Verilog-A, so that, we can use this model to do circuit simulation?

And I've searched for some lectures that provide the Verilog-A code in the appendix, but I'm freshman in the field of Verilog-A, 

could anyone tell me each statement? such as

real hlayer-w[0:(NI*NNHL)-1   

With the latest release (Sigrity and Systems Analysis 2022.1 HF2) of Clarity  3D Solver, support for encrypted component models is now available. With this functionality, vendors that supply 3D components, such as connectors, can now merge their...(read more)

Dear All,

To design an outphasing combiner, I need to extract the input impedances when the circuit is driven by two sources concurrently with a varying phase-shift and plot them on a Smith Chart. However, I can't find a way to display the simulated S-parameters on a Smith Chart.

The testbench, shown below, consists of two sources set to 50 Ohm with variable phase (PORT0: theta, PORT1: -theta) swept from -90° to 90°. The NPORTs are couplers used to isolate the forward and reflected power at each source, i.e. the S-parameters are:

• S13 = S31 = 1; through path
• S21 = S41 = 1; forward and reflected power
• All other are zero

The testbench is simulated with an "hb" analysis instead of "sp", as the two sources have to be excited simultaneously with varying phase-shift to see their load-modulation effect. The sweep is setup in the "Choosing Analysis" window. The powers of the forward (pXa) and reflected (pXb) waves are found through the "Direct Plot" window, e.g. pvr('hb "/p1a" 0 50.0 '(1)) as the power for p1a, and named P1A_Watt. The S-parameters are then calculated as the reflected power w.r.t. the forward power P1B_Watt/P1A_Watt. This approach is based on a Hot S-parameter testbench from ADS.

At this point I would like to display these S-parameters on a Smith Chart. However, this seemed more challenging than expected. One straightforward method would seem to create an empty Smith Chart window in the Display Window and dragging the S-parameters from the rectangular plot on it, but this just deletes them from the Display Window. Hence my question:

How can I display these S-parameters on a Smith Chart?

Hi, in EMX I'm trying to define the ports of a CPW line as suggested in one document of the support area (i.e. P1:Gright,Gleft). The EMX simulation works fine. When I generate the schematic, I get this:

Basically, the two ground ports of each end of the CPW are properly defined as a unique node (e.g. G2_1, G2_2). 

However, when I try a simulation I get this error: 

I hope you can help me. Thanks.

Hi,

In our design team, we're looking for a strategy to make all cell views self-contained. We are struggling to do so when nport devices are involved.

The nport file requires a full path, whereas what we need is a relative path to the current path of the cell in which we're using the nport.

I have browsed through the forums & cadence support pages, but could not find a solution.

1) There is a proposal from Andrew to add the file directory in ADE option "Simulation Files." :https://community.cadence.com/cadence_technology_forums/f/rf-design/27167/s-parameter-datafile-path-in-nport . This, however, is not suitable, because the cell is not self contained.

2) The new cadence version off DataSource "cellView" in nport options:

This however is not suitable for us due to two reasons:

i- Somehow we don't get this option in the nport cell (perhaps some custom modification from our PDK team)

ii- Even if we had this option, it requires to select the library, which again makes it unsuitable: We often copy design libraries for derivative products using "Hierarchical Copy" feature. And when the library is copied, the nport will still be pointing to the old library. Thus, it is still not self-contained.

In principle, it should not be difficult (technically) to point to a text file relative to the cell directory (f.ex we can make a folder under the same cell with name "sparFiles" & place all spar files under this folder), however it does not seem to be possible.

Could you perhaps recommend us a work-around to achieve our goal: making the cells which contain nport devices self-contained so that when we copy a cell, we do not have to update all the nport file destinations ?

Thanks in advance.

My Cadence Version: IC23.1-64b.ISR4.51

My Spectre version: 23.1.0.362.isr5

Hi

I'm learning Hb analysis for the IIP3 simulation of a gilbert mixer. My f_RF=5GHz, f_LO=4GHz and f_IF=1GHz . I'm a bit confused about setting the 1st order and 3rd order harmonic at the Direct plot form. I have set 1st order harmonic = 1GHz and 3rd order harminic = 2*f_LO-f_RF = 3GHz and it gives me the following results.

This is my 1dB compression point result

Hb analysis window

Direct plot window

Please let me know if my harmonic selection is correct and whether I'm getting a correct IIP3 and P1db curve

Hi I noticed that some figures from the old posts in the cadence blogs have been missing.

I think this problem happened before and Andrew Beckett asked the original author to fix the issue:

 Figures missing in the RF Design Blogs article of "Measuring Fmax for MOS Transistors" 

Some of these posts are quite valuable, and would be nice to have access to the figures, which are a very important part of some posts,

Thanks

Leandro

Read through this blog to know more about the new Reliability Report view in Virtuoso ADE Assembler and Virtuoso ADE Explorer.(read more)

I have been involved in the Virtuoso RF Solution for the last four years. Most of the customers I work with have a SiP package already in progress. They often ask "How do I get my SiP design into Virtuoso RF Solution?" I am excited about new functionality in the latest ICADVM20.1 ISR25 release. It is a new GUI under the Tools menu called Enablement. (read more)

An AMS Designer Flex simulation gives you the most immediate access to the latest simulation technology on either side, gets out of the way of the core engines and allows the engine performance to shine while providing access to new features. Check out this blog to know more.

The ICADVM20.1 ISR26 and IC6.1.8 ISR26 production releases are now available for download.(read more)

This blog introduces you to an efficient way to debug interface elements or connect modules in a mixed-signal simulation.(read more)

Read this blog for an overview to the Circuit physical verification and parasitic extraction design stage in the Custom IC Design methodology and the key design steps which can help you achieve this.(read more)

This blog describes how to efficiently use Virtuoso Visualization and Analysis XL.(read more)

In my last blog, Getting Your Existing SiP File Into Virtuoso RF, I talked about the new enhancements in ICADVM20.1 ISR25 for Virtuoso RF Solution. At the end of the blog, I told you about the Fully Assisted Roundtrip flow, which includes importing SiP files that are compatible with the Virtuoso RF Solution assisted import flow into the Virtuoso platform. Let's examine how the Fully Assisted Roundtrip flow works in this blog.(read more)

The ICADVM20.1 ISR27 and IC6.1.8 ISR27 production releases are now available for download.(read more)

Concurrent Layout Editing enables more than one designer to work in a hierarchy at the same time. Check out this blog to know more. (read more)

This blog introduces the new Voltus-XFi Custom Power Integrity Solution, a transistor-level EM-IR tool that enables designers to complete comprehensive analysis and debugging easily and quickly.(read more)

This blog helps in demonstrating the use of Pin to trunk routing style which helps in enhancing the layout experience.(read more)

hello:

i place a symbol into my design.

on my design, i change the symbol property by unlocking the symbol and unfixing pins so that i can move pins on the symbol.

i move some pins on my design.

but when i export the symbol from my design, the symbol is not current but has the original pin location.

is there a way to retain the pin locations after moving pins on a symbol when exporting the symbol?

regards

masa

The world of electronics design thrives on efficient tools that bridge the gap between concept and silicon. Virtuoso Digital Implementation is a powerful ally for mixed-signal designs, which integrate both analog and digital components. This blog post will examine Virtuoso Digital Implementation's capabilities and explore how it can streamline your mixed-signal design workflow.

Virtuoso Digital Implementation in a Nutshell

Virtuoso Digital Implementation is a license package within the Cadence Virtuoso Design Platform. It offers a streamlined RTL-to-GDSII flow to implement smaller digital blocks within a mixed-signal design environment. Here's what makes Virtuoso Digital Implementation stand out:

• Focus on Small Digital Blocks: Optimized for digital blocks with an instance count of up to 50,000 (expandable to 150,000 with specific configurations), Virtuoso Digital Implementation is ideal for integrating digital logic into your analog-centric design.
• Leveraging Industry Leaders: Virtuoso Digital Implementation utilizes cut-down versions of the renowned Cadence Genus Synthesis Solution and Innovus Implementation System under the hood. This ensures you get access to proven technologies for logic optimization and place-and-route.
• Seamless Integration with the Virtuoso Environment: Virtuoso Digital Implementation's key advantage is its tight integration with the Virtuoso Layout Suite. You can launch the synthesis and place-and-route tools directly from the Virtuoso environment, eliminating the need to switch between platforms.

Benefits of Using Virtuoso Digital Implementation

 By incorporating Virtuoso Digital Implementation into your mixed-signal design flow, you can get several benefits:

• Simplified Workflow: Virtuoso Digital Implementation offers a centralized environment for both digital block implementation and layout editing within the Virtuoso environment. This reduces context switching and streamlines the design process.
• Faster Time-to-Market: Virtuoso Digital Implementation's streamlined workflow can significantly reduce design turnaround times, allowing you to get your product to market quicker.
• Improved Design Quality: Leveraging industry-leading synthesis and place-and-route engines from Cadence ensures high-quality digital block implementation within your mixed-signal design.

Who Should Consider Virtuoso Digital Implementation?

 Virtuoso Digital Implementation is a valuable tool for anyone working on mixed-signal designs with smaller digital blocks. It's particularly well-suited for:

• Analog IC designers who need to integrate digital logic into their designs.
• Circuit design teams working on mixed-signal applications like data converters, power management ICs, and RF transceivers.

Virtuoso Digital Implementation provides a compelling solution for designers working on mixed-signal projects. Its streamlined workflow, tight integration with the Virtuoso design platform, and access to proven digital design tools can significantly improve design efficiency and time-to-market. Virtuoso Digital Implementation is worth considering if you're looking to optimize your mixed-signal design flow.

I am here to help and guide you on how to learn more about Virtuoso Digital Implementation flow.

Welcome to Virtuoso Digital Implementation, an online course recently released. This course teaches implementing digital blocks using Cadence tools based on the Virtuoso Digital Implementation flow. Also, you can download a lab database after the lecture and get hands-on experience in each stage.

Want to Enroll in this Course?

We organize this Virtuoso Digital Implementation training for you as a "Blended" or "Live" training. Please reach out to Cadence Training for further information.

Register for the Online Training with the following steps:

• Log on to cadence.com with your registered Cadence ID and password.
• Select Learning from the menu > Online Courses.
• Search for Virtuoso Digital Implementation using the search bar.
• Select the course and click Enroll.

And don't forget to obtain your Digital Badge after completing the training!

Related Resources

Online Courses

• Cadence RTL-to-GDSII Flow v6.0
• Virtuoso Digital Implementation Training

Training Byte Videos

• How Do You Run Placement Optimization in the Innovus Implementation System?
• How to Run the Synthesis Without DFT?
• How to Run the Synthesis Flow with DFT?
• Creating Power Rings, Power Stripes, and Power Rails in the Innovus Implementation System
• How to Run Power Analysis and Analyze the Results in Innovus?

Happy Learning!