I am trying to install IC231 on RHEL 8 using installscape, however configuring keeps failing.

I tried to run the configuration file manually as suggested in one of the previous posts and it gives me following errors:

sh batch_configure.sh
/home/rs/cadence/installs/IC231/install/tmp/slconfig.sh: line 165: xterm: command not found
cat: ncvhdl23.03-d103lnx86_101124125631.stat: No such file or directory
rm: cannot remove 'ncvhdl23.03-d103lnx86_101124125631.stat': No such file or directory
/home/rs/cadence/installs/IC231/install/tmp/slconfig.sh: line 165: xterm: command not found
cat: ncvhdl64b23.03-d103lnx86_101124125631.stat: No such file or directory
rm: cannot remove 'ncvhdl64b23.03-d103lnx86_101124125631.stat': No such file or directory
/home/rs/cadence/installs/IC231/install/tmp/slconfig.sh: line 165: xterm: command not found
cat: oaRedist22.61-p003lnx86_101124125631.stat: No such file or directory
rm: cannot remove 'oaRedist22.61-p003lnx86_101124125631.stat': No such file or directory
/home/rs/cadence/installs/IC231/install/tmp/slconfig.sh: line 165: xterm: command not found
cat: amsEnv64b23.10-p043lnx86_101124125631.stat: No such file or directory
rm: cannot remove 'amsEnv64b23.10-p043lnx86_101124125631.stat': No such file or directory
/home/rs/cadence/installs/IC231/install/tmp/slconfig.sh: line 165: xterm: command not found
cat: ihdl64b23.10-p043lnx86_101124125631.stat: No such file or directory
rm: cannot remove 'ihdl64b23.10-p043lnx86_101124125631.stat': No such file or directory

I am not very well versed with Linux at the moment but trying. Could any one suggest something or point to what is missing?

The Cadence AWR Design Environment V22.1 production release is now available for download at Cadence Downloads with design environment, AWR Microwave Office, AWR VSS, AWR Analyst, and other enhancements.(read more)

Ensuring that the RTL designs correctly implement the C++ algorithmic intent in every circumstance is difficult to achieve with conventional verification. Learn more how Jasper C2RTL App helps to perform equivalence checking with 100x performance improvement(read more)

Explore Impacts of Finite Interconnect Impedance on PDN Characterization

Over the past few decades, many details have been worked out in the power distribution network (PDN) in the frequency and time domains. We have simulation tools that can analyze the physical structure from DC to very high frequencies, including spatial variations of the behavior. We also have frequency- and time-domain test methods to measure the steady-state and transient behavior of the built-up systems.

All of these pieces in our current toolbox have their own assumptions, limitations, and artifacts, and they constantly raise the challenging question that designers need to answer: How to select the design process, simulation, measurement tools, and processes so that we get reasonable answers within a reasonable time frame with a reasonable budget.

Read this award-winning DesignCon 2024 paper titled “Impact of Finite Interconnect Impedance Including Spatial and Domain Comparison of PDN Characterization.” Led by Samtec’s Istvan Novak and written with a team of nine authors from Cadence, Amazon, and Samtec, the paper discusses a series of continually evolving challenges with PDN requirements for cutting-edge designs.

Read the full paper now: “Impact of Finite Interconnect Impedance Including Spatial and Domain Comparison of PDN Characterization.”

The OrCAD X and Allegro X 24.1 release is now available at Cadence Downloads. This blog post provides links to access the release and describes some major changes and new features.   OrCAD X /Allegro X 24.1 (SPB241) Here is a representative li...(read more)

Cadence is super excited to announce SPB 23.1 release —Your freedom to design boldly!  

These tools help engineers build better PCBs faster with the new 3D engine and optimized interface.  

We have been hard at work to bring you this release and believe that it will help you take control of the PCB design process with the powerful new features in Allegro X APD like: 

• Packaging Support in 3DX Canvas 

• 3DX Wire DRCs 

• Aligning Components by Offset 

• Text Wizard Enhancements 

• Device File Reuse for Existing Components for Netlist and Logic Import 

Watch this space to know all about What’s New in SPB 23.1.  

Regards 

Team PCBTech 

Cadence Design System 

For individuals, small businesses, or teams, START YOUR FREE TRIAL. 

Starting SPB 23.1, Allegro Package Designer Plus (APD+) has been rebranded as Allegro X Advanced Package Designer (Allegro X APD).

The splash screen for Allegro X APD will appear as shown below, instead of showing APD+ 2023:

For the Windows Start menu in 23.1, it will display as Allegro X APD 2023 instead of APD+ 2023, as shown below

23.1 Start menu 

In the Product Choices window for 23.1, you will see Allegro X Advanced Package Designer in the place of Allegro Package Designer +, as shown below: 

23.1 product title

The course "Jasper Formal Fundamentals v24.03" introduces formal analysis to those who want to use formal analysis for design or verification. 

To optimally benefit from this course, you must already have sufficient knowledge of the System Verilog assertions to be capable of writing properties for formal verification. Hence, this training provides a module on formal analysis to help cover this essential background. 

In this course, you will learn how to code efficient SVA Properties for formal analysis, understand formal complexity and how to overcome it, and learn the basics of formal coverage.

After completing this course, you will be able to:

• Define reusable, functionally correct SVA properties that are efficient for formal tools. These shall use abstract auxiliary code to simplify descriptions, make code maintenance easier, reduce debug time, and reduce tool-proof runtime.
• Set up, run, and analyze results from formal analysis.
• Identify designs upon which formal is likely to be successful while understanding formal complexity issues and how to identify and overcome them.
• Use a systematic property development process to approach a completely new verification problem.
• Understand the basics of formal coverage.

 The most recently updated release includes new modules on:

• "Basic complexity handling" which discusses the complexity in formal and how to identify and handle them.
• "Complexity reduction methods” which discusses the complexity reduction methods and which is suitable for which type of complexity problem.
• “Coverage in formal” which discusses the basics of coverage in formal verification and how coverage can be used in formal.   

Take this course to learn the basics of formal verification. 

What's Next? 

You can check out the complete training: Jasper Formal Fundamentals. There is a free online version of the training available 24/7 for all customers with a Cadence Learning and Support Portal account. If you are interested in an instructor-led version of the training, please contact Cadence Training. And don't forget to obtain your digital badge after completing the training!

You can also check Jasper University page for more materials on formal analysis and Jasper apps. 

Related Trainings 

Jasper Formal Expert Training Course | Cadence

Verilog Language and Application Training Course | Cadence

SystemVerilog for Design and Verification Training Course | Cadence

SystemVerilog Assertions Training Course | Cadence

Related Training Bytes 

Jasper Formal Property Verification (FPV) App: Basic Usage Demo (Video)

Jasper Formal Methodology playlist

Related Training Blogs

It’s the Digital Era; Why Not Showcase Your Brand Through a Digital Badge!

Training Insights: Introducing the C++ Course for All Your C++ Learning Needs!

Training Insights: Reaching Your Verification Closure Using Verisium Manager

Training Insights - Free Online Courses on Cadence Learning and Support Portal

Cadence Protium prototyping platforms rapidly bring up an SoC or system prototype and provide a pre-silicon platform for early software development, SoC verification, system validation, and hardware regressions. In this Training W ebinar, we will explore debugging using Save/Restart on Protium X2 . This feature saves execution time and lets you focus on actual debugging. The system state can be saved before the bug appears and restartS directly from there without spending time in initial execution. We’ll cover key concepts and applications, explore Save/Restart performance metrics, and provide examples to help you understand the concepts. Agenda: The key concepts of debugging using save/restart Capabilities, limitations, and performance metrics Some examples to enable and use save/restart on the Protium X2 system Date and Time Thursday, November 7, 2024 07:00 PST San Jose / 10:00 EST New York / 15:00 GMT London / 16:00 CET Munich / 17:00 IST Jerusalem / 20:30 IST Bangalore / 23:00 CST Beijing REGISTER To register for this webinar, sign in with your Cadence Support account (email ID and password) to log in to the Learning and Support System*. Then select Enrol to register for the session. Once registered, you’ll receive a confirmation email containing all login details. A quick reminder: If you haven’t received a registration confirmation within 1 hour of registering, please check your spam folder and ensure your pop-up blockers are off and cookies are enabled. For issues with registration or other inquiries, reach out to eur_training_webinars@cadence.com . Want to See More Webinars? You can find recordings of all past webinars here Like This Topic? Take this opportunity and register for the free online course related to this webinar topic: Protium Introduction Training The course includes slides with audio and downloadable lab exercises designed to emphasize the topics covered in the lecture. There is also a Digital Badge available for the training. Want to share this and other great Cadence learning opportunities with someone else? Tell them to subscribe . Hungry for Training? Choose the Cadence Training Menu that’s right for you. To view our complete training offerings, visit the Cadence Training website . Related Courses Protium Introduction Training Course | Cadence Palladium Introduction Training Course | Cadence Related Blogs Training Insights – A New Free Online Course on the Protium System for Beginner and Advanced Users Training Insights – Palladium Emulation Course for Beginner and Advanced Users Related Training Bytes Protium Flow Steps for Running Design on Protium System ICE and IXCOM mode comparison ICE compile flow IXCOM compile flow PATH settings for using Protium System Please see the course learning maps for a visual representation of courses and course relationships. Regional course catalogs may be viewed here

The Sigrity and Systems Analysis (SIGRITY/SYSANLS) 2024.1 release is now available for download at Cadence Downloads . For the list of CCRs fixed in this release, see the README.txt file in the installation hierarchy. SIGRITY/SYSANLS 2024.1 Here is a list of some of the key updates in the SIGRITY/SYSANLS 2024.1 release: For more details about these and all the other new and enhanced features introduced in this release , refer to the following document: Sigrity Release Overview and Common Tools What's New . Supported Platforms and Operating Systems Platform and Architecture X86_64 (lnx86) Windows (64 bit) Development OS RHEL 8.4 Windows Server 2022 Supported OS RHEL 8.4 and above RHEL 9 SLES 15 (SP3 and above) Windows 10 Windows 11 Windows Server 2019 Windows Server 2022 Systems Analysis 2024.1 Clarity 3D Solver Clarity 3D Layout Structure Optimization Workflow : A new workflow, Clarity 3D Layout Structure Optimization Workflow, has been added to Clarity 3D Layout. This workflow integrates Allegro PCB Designer with Clarity 3D Layout for high-speed structure optimization. Component Geometry Model Editor : The new Clarity 3D Layout editor lets you set up ports, solder bumps/balls/extrusions, and two-terminal and multi-terminal circuits using a single GUI. Coaxial Open Port Option Added to Port Setup Wizard : The Coaxial Open Port option lets you create ports for each target net pin and reference net pin in Clarity 3D Layout. The nearby reference net pins are then used as a reference for each target net pin, reducing the number of ports needed. In addition, the ports of unused reference net pins are shorted to the ground. Parametric Import Option Added : Two new options, Parametric Import and Default Import , have been added to the Tools – Launch Clarity3DWorkbench menu. The Parametric Import option lets you import the design along with its parameters into Clarity 3D Workbench. The Default Import option lets you ignore the parameters when importing the design into Clarity 3D Workbench. Component Library Added to Generate 3D Components : Clarity 3D Workbench now includes a new component library that lets you use predefined 3D component templates or add existing 3D components to create 3D designs and simulation models. AI-Powered Content Search Capability : Clarity 3D Workbench and Clarity 3D Transient Solver now support an AI-powered capability for searching the content and displaying relevant information. Expression Parser to Handle Undefined Parameters : Clarity 3D Workbench and Clarity 3D Transient Solver support writing expressions or equations containing undefined parameters in the Property window to describe a simulation variable. The improved expression parser automatically detects any undefined parameter in an expression and prompts users to specify their values. This capability lets you define a model or a simulation variable as a function instead of specifying static values. For detailed information, refer to Clarity 3D Layout User Guide and Clarity 3D Workbench User Guide on the Cadence Support portal. Clarity 3D Transient Solver Mesh Processing Improved to Simulate Large Use Cases : Clarity 3D Transient Solver leverages a new meshing algorithm that enhances overall mesh processing, specifically for large designs and use cases. The new algorithm dramatically improves the mesh quality, minimum mesh size, number of mesh key points, total mesh number, and memory usage. Advanced Material Processing Engine : The material processing capability has been enhanced to handle thin outer metal, which previously resulted in open and short issues in some designs. In addition, the material processing engine offers improved mode extraction for particular use cases, including waveguide and coaxial designs. Characteristic Impedance Calculation Improved : The solver engine now uses a new analytical calculation method to calculate the characteristic impedance of coaxial designs with improved accuracy. For detailed information, refer to Clarity 3D Transient Solver User Guide on the Cadence Support portal. Celsius Studio Celsius Interchange Model Introduced : Celsius Studio now supports Celsius Interchange Model generation, which is a 3D model derived from detailed physical designs for multi-physics and multi-scale analysis. This Celsius Interchange Model file ( .cim ) serves as a design information carrier across Celsius Studio tools, enabling a variety of simulation and analysis tasks . Celsius 3DIC Thermal Workflow Improvements : The Thermal Simulation workflows in Celsius 3DIC have been significantly enhanced. Key improvements include: Advanced Power Setup with Transient Power Function and Multi Mode options Enhanced GUI for the Mesh Control and Simulation Control tabs Improved meshing capabilities Celsius Interchange Model ( .cim ) generation Material library support for block and connections Import of Heat Transfer Coefficients (HTCs) from a CFD file Bump creation through the Bump Array Wizard Layer Stackup CSV file generation Celsius 3DIC Warpage and Stress Workflow Enhancements : The Warpage and Stress workflow in Celsius 3DIC has undergone significant improvements, such as: Improved multi-stage warpage simulation flow for 3DIC packaging process Enhanced GUI for the Mesh Control , Simulation Control , and Stress Boundary Conditions tabs Support for large deformations and temperature profiles Bump creation through the Bump Array Wizard New constraint types Enhanced meshing capabilities Geometric Nonlinearity Support in Warpage and Stress Analysis : Large deformation analysis is now supported in warpage and stress studies. This study uses the Total Lagrangian approach to model geometric nonlinearities in simulation, which allows accurate prediction of final deformations. Thermal Network Extraction and Simulation : In the solid extraction flow in Celsius 3D Workbench, you can now import area-based power map files to create terminals. For designs with multiple blocks, this capability allows automatic terminal creation, eliminating the need to manually create and set up 2D sheets individually. Additionally, thermal throttling feature is now supported in Celsius Thermal Network. This makes it ideal for preliminary analyses or when a quick estimation is required. It runs significantly faster than 3D models, allowing for quicker iterations and more efficient decision-making. For detailed information, refer to the Celsius 3DIC User Guide , Celsius Layout User Guide and Celsius 3D Workbench User Guide on the Cadence Support portal. Sigrity 2024.1 Layout Workbench Improved Graphical User Interface : A new option, Use Improved User Interface , has been added in the Themes page of the Options dialog box in the Layout Workbench GUI. In the new GUI, the toolbar icons and menu options have been enhanced and rearranged. For detailed information, refer to Layout Workbench User Guide on the Cadence Support portal. Broadband SPICE Python Script Integration with Command Line for Simulation Tasks : Broadband SPICE lets you run Python scripts directly from the command line for performing simulation and analysis. The new -py and *.py options make it easier to integrate Python scripts with the command-line operations. This update streamlines the process of automating and customizing simulations from the command line, which makes your simulation tasks faster and easier. For detailed information, refer to Broadband SPICE User Guide on the Cadence Support portal. Celsius PowerDC Block Power Assignment (BPA) File Format Support : PowerDC now supports the BPA file format. Similar to the Pin Location (PLOC) file, the BPA file is a current assignment file that defines the total current of a power grid cell, which is then equally distributed across the power pins within the cell. This provides better control over the power distribution. Ability to Run Multiple IR Drop Cases Sequentially : You can now select multiple result sinks from the Current-Limited IR Drop flow and run IR Drop analysis for them sequentially. PowerDC automatically runs the simulations in sequence after you select multiple result sinks. This saves time by automating the process. Enhanced Support for Mixed Conversion Devices : PowerDC now supports mixing different conversion devices, such as switching regulators and linear regulators within a single DC-DC/LDO instance. This enhancement offers added flexibility by letting you configure each instance in your design according to your specific needs. For detailed information, refer to PowerDC User Guide on the Cadence Support portal. PowerSI Monte Carlo Method Added : A new option, Monte Carlo Method, has been added in the Optimality dialog box. This option lets you create multiple random samples to depict variations in the input parameters and assess the output. Channel Check Optimization Added : The S-Parameter Assessment workflow in PowerSI now supports Channel Check Optimization . It uses the AI-driven Multidisciplinary Analysis and Optimization (MDAO) technology that lets you optimize your design quickly and efficiently with no accuracy loss. For detailed information, refer to PowerSI User Guide on the Cadence Support portal. SPEEDEM Multi-threaded Matrix Solver Support Added : The Enable Multi-threaded Matrix Solver check box has been added that lets you accelerate the simulation speed for high-performance computing. This check box provides two options, Automatic and Always, to include the -lhpc4 or -lhpc5 parameter, respectively, in the SPEEDEM Simulator (SPDSIM) before running the simulation. For detailed information, refer to the SPEEDEM User Guide on the Cadence Support portal. XtractIM Options to Skip or Calculate Special DC-R Simulation Results : The Skip DC_R of Each Path and Only DC_R of Each Path options have been added to the Setup menu. Skip DC_R of Each Path : This option lets you skip the calculation of the DC-R result during the simulation. Other results, such as SPICE T-model , RL_C of Each Path , Coupling of Each Path , etc., are still calculated. Only DC_R of Each Path : This option lets you calculate the DC-R result only during the simulation. Other results, such as SPICE T-model , RL_C of Each Path , Coupling of Each Path , etc., are not calculated. Color Assignment for Pin Matching : The MCP Auto Connection window includes the Display Color Editor , which lets you assign a color for pin matching. It helps you easily identify the matching pins in the left and right sections of the MCP Auto Connection window . Ability to Save Simulations Individually : The Save each simulation individually check box has been added to the Tools - Options - Edit Options - Simulation (Basic) - General form. Select this check box and run the simulation to generate a simulation results folder containing files and logs with a timestamp for each simulation. Reuse of SPD File Settings : The XtractIM setup check box lets you import an existing package setup to reuse the configurations and settings from one .spd file to another. For detailed information, refer to XtractIM User Guide on the Cadence Support portal. Documentation Enhancements Cloud-Based Help System Upgraded The cloud-based help system, Doc Assistant, has been upgraded to version 24.10, which contains several new features and enhancements over the previous 2.03 version. Sigrity Release Team Please send your questions and feedback to sigrity_rmt@cadence.com .

This November, the engineering and simulation community is set to converge in China for an event that promises to be nothing short of revolutionary. The 2024 BETA CAE Systems China Open Meeting, taking place in the vibrant cities of Beijing and Shanghai on November 5 and 7 , respectively, is a must-attend for anyone looking to stay at the forefront of technological innovation in simulation solutions. Prepare to be inspired by Ben Gu , the visionary Corporate VP of Research and Development at Cadence. He will lead both meetings in Beijing and Shanghai with his keynote on " A New Millennium in Multiphysics System Analysis ." This thought-provoking keynote is expected to provide attendees with a glimpse into the future of engineering simulation and analysis. What sets the BETA CAE Systems Open Meetings apart is not just the high caliber of speakers but also the hands-on training sessions designed to enhance your technical expertise with the BETA CAE software suite. Whether you are an inexperienced individual seeking to acquire fundamental knowledge or an accomplished professional endeavoring to hone your expertise, these training sessions following the open meetings are meticulously tailored to meet your needs. Join Us at the BETA CAE Systems Open Meeting in Beijing The BETA CAE Systems Open Meeting in Beijing will feature a keynote speech by Peng Qiao , Senior Engineer at Great Wall Motors Co., Ltd, on Multidisciplinary Optimization Techniques for Automotive Control Arms . ( View detailed agenda for Beijing. ) When: November 5, 2024 Where: Grand Metropark Hotel Beijing If this sounds interesting, register today for the BETA CAE Systems Beijing Open Meeting by clicking the button below. Don't Miss Out on the BETA CAE Systems Open Meeting in Shanghai After the BETA CAE Systems Open Meeting in Beijing, the next meeting in China will be in Shanghai. During this event, Liu Deping, CAE Engineer from Zhejiang Geely Automobile Research Institute Co., Ltd, will deliver a keynote speech on the Application of ANSA in the Simulation Development Cycle . ( View detailed agenda for Shanghai. ) When: November 7, 2024 Where: InterContinental Shanghai Jing'an Following the open meeting on November 7 will be an exclusive training day on November 8. This session will provide attendees with practical experience using the BETA CAE software to improve their technical skills and provide hands-on knowledge of the software. If you find this intriguing, register now for the BETA CAE Systems Shanghai Open Meeting by clicking the button below. Why Attend? Gain firsthand insights into the latest developments in simulation technology Learn from real-world applications and success stories from various industries Connect and exchange ideas with experts in a collaborative environment Mark your calendars for this unparalleled opportunity to explore the forefront of simulation technology. Whether you're aiming to broaden your knowledge, enhance your technical skills, or connect with industry leaders, the BETA CAE Systems Open Meetings are your gateway to the future of engineering. Join us and be part of shaping the next wave of innovation in the simulation world.

The demand for higher compute performance, energy efficiency, and faster time-to-market drove the conversations at this year's Open Compute Project (OCP) Global Summit in San Jose, California. It was the scene of showcasing groundbreaking innovations, expert-led sessions, and networking opportunities to drive the future of data center technology. For those who didn't get to attend or stop by our booth, here's a recap of Cadence's comprehensive solutions that enable next-generation compute technology, AI data center design, analysis, and optimization. Optimized Data Center Design and Operations As the data center community increasingly faces demands for enhanced efficiency, thermal management, sustainability, and performance optimization, data center operators, IT managers, and executives are looking for solutions to these challenges. At the Cadence booth, attendees explored the Cadence Reality Digital Twin Platform and Celsius EC Solver. These technologies are pivotal in achieving high-performance standards for AI data centers, providing advanced digital twin modeling capabilities that redefine next-generation data center design and operation. The Celsius EC Solver demonstration showed how it solves challenging thermal and electronics cooling management problems with precision and speed. CadenceCONNECT: Take the Heat Out of Your AI Data Center Cadence hosted a networking reception on October 16 titled "Take the Heat Out of Your AI Data Center." In today's AI era, managing the heat generated by high-density computing environments is more critical than ever. This reception offered insights into current and emerging data center technologies, digital twin cooling strategies that deliver energy-saving operations, and a chance to engage with industry leaders, Cadence experts, and peers to explore the latest cooling, AI, and GPU acceleration advancements. Here's a recap: Researcher, author, and entrepreneur Dr. Jon Koomey highlighted the inefficiency of data centers in his talk "The Rise of Zombie Data Centers," noting that 20-30% of their capacity is stranded and unused. He advocated for organizational changes and technological solutions like digital twins to reduce wasted energy and improve computational effectiveness as AI deployments increase. In "A New Millennium in Multiphysics System Analysis," Cadence Corporate VP Ben Gu explained the company's significant strides in multiphysics system analysis, evolving from chip simulation to a broader application of computational software for simulating various physical systems, including entire data centers. He noted that the latest Cadence venture, a digital twin platform for data center optimization, opened the opportunity to use simulation technology to optimize the efficiency of data centers. Senior Software Engineering Group Director Albert Zeng highlighted the Cadence Reality DC suite's ability to transform data center operations through simulation, emphasizing its multi-phase engine for optimal thermal performance and the integration of AI capabilities for enhanced design and management. A panel discussion titled "Turning AI Factory Blueprints into Reality at the Speed of Light" featured industry experts from NVIDIA, Norman Wright Precision Environmental and Power, NV5, Switch Data Centers, and Cadence, who explored the evolving requirements and multidimensional challenges of AI factories, emphasizing the need for collaboration across the supply chain to achieve high-performing and sustainable data centers. Watch the highlights. Transforming Designs from Chips to Data Centers The OCP Global Summit 2024 has reaffirmed its status as a pivotal event for data center professionals seeking to stay at the forefront of technological advancements. Cadence's contributions, from groundbreaking digital twin technologies to innovative cooling strategies, have shed light on the path forward for efficient, sustainable data centers. For data center professionals, IT managers, and engineers, the insights gained at this summit are invaluable in navigating the challenges and opportunities presented by the burgeoning AI era. Partnering with Arm Arm Total Design Cadence is a member of the Arm Total Design program. At an invitation-only special Arm event, Cadence's VP of Research and Development, Lokesh Korlipara, delivered a presentation focusing on data center challenges and design solutions with Arm Neoverse Compute Subsystem (CSS). The session highlighted: Efficient integration of Arm Neoverse CSS into system on chips (SoCs) with pre-integrated connectivity IP Performance analysis and verification of the Neoverse CSS integration into the SoC through Cadence's System VIP verification suite and automated testbench creation, enhancing both quality and productivity Jumpstarting designs through Cadence's collaboration with Arm for 3D-IC system planning, chiplets, and interposers Design Services readiness and global scale to support and/or deliver the most demanding Arm Neoverse CSS-based SoC design projects Cadence Supports Arm CSS in Arm Booth During the event, Cadence conducted a demo in the Arm booth that showcased the Cadence System VIP verification suite. The demo highlighted automated testbench creation and performance analysis for integrating the Arm CSS into SoCs while enhancing verification quality and productivity. Summary Cadence offers data center solutions for designing everything from the compute and networking chips to the board, racks, data centers, and campuses. Stay connected with Cadence and other industry leaders to continue exploring the innovations set to redefine the future of data centers. Learn More Cadence Joins Arm Total Design Cadence Arm-Based Solutions Cadence Reality Digital Twin Platform

Hi ,

  FIrst of all , I hope I have posted my query in the right place . I am expecting software support/suggestions for the below issue.

   I am working on LTE which use USB interface and the Host Controller is USB 2.0 . The BSP is from NXP which supports Cadence USB 3.0 Host controller and with USB 3.0 supported cadence driver.NXP had used the   USB 3.0 host controller for USB type C based device.

  Cadence USB 3.0 based device driver seems to be backward compatible for USB 2.0 host controller .Since basic LTE functionalities seems to be working fine I continued to use the same driver in Linux 4.14.62 

  But I am facing a kernel warning of unhandled interrupt and the crash log points to cdns_irq function as shown below  The crash/kerenel warning is very random and not occuring all the time.

.691533] irq 36: nobody cared (try booting with the "irqpoll" option)

[ 1.698242] CPU: 0 PID: 87 Comm: kworker/0:1 Not tainted 4.9.88 #24

[ 1.704509] Hardware name: Freescale i.MX8QXP MEK (DT)

[ 1.709659] Workqueue: pm pm_runtime_work

[ 1.713675] Call trace:

[ 1.716123] [<ffff0000080897d0>] dump_backtrace+0x0/0x1b0

[ 1.721523] [<ffff000008089994>] show_stack+0x14/0x20

[ 1.726582] [<ffff0000083daff0>] dump_stack+0x94/0xb4

[ 1.731638] [<ffff00000810f064>] __report_bad_irq+0x34/0xf0

[ 1.737212] [<ffff00000810f4ec>] note_interrupt+0x2e4/0x330

[ 1.742790] [<ffff00000810c594>] handle_irq_event_percpu+0x44/0x58

[ 1.748974] [<ffff00000810c5f0>] handle_irq_event+0x48/0x78

[ 1.754553] [<ffff0000081100a8>] handle_fasteoi_irq+0xc0/0x1b0

[ 1.760390] [<ffff00000810b584>] generic_handle_irq+0x24/0x38

[ 1.766141] [<ffff00000810bbe4>] __handle_domain_irq+0x5c/0xb8

[ 1.771979] [<ffff000008081798>] gic_handle_irq+0x70/0x15c

1.807416] 7a40: 00000000000002ba ffff80002645bf00 00000000fa83b2da 0000000001fe116e

[ 1.815252] 7a60: ffff000088bf7c47 ffffffffffffffff 00000000000003f8 ffff0000085c47b8

[ 1.823088] 7a80: 0000000000000010 ffff800026484600 0000000000000001 ffff8000266e9718

[ 1.830925] 7aa0: ffff00000b8b0008 ffff800026784280 ffff00000b8b000c ffff00000b8d8018

[ 1.838760] 7ac0: 0000000000000001 ffff000008b76000 0000000000000000 ffff800026497b20

[ 1.846596] 7ae0: ffff00000810bd24 ffff800026497b20 ffff000008851d18 0000000000000145

[ 1.854433] 7b00: ffff000008b8d6c0 ffff0000081102d8 ffffffffffffffff ffff00000810dda8

[ 1.862268] [<ffff000008082eec>] el1_irq+0xac/0x120

[ 1.867155] [<ffff000008851d18>] _raw_spin_unlock_irqrestore+0x18/0x48

[ 1.873684] [<ffff00000810bd24>] __irq_put_desc_unlock+0x1c/0x48

[ 1.879695] [<ffff00000810de10>] enable_irq+0x48/0x70

[ 1.884756] [<ffff0000085ba8f8>] cdns3_enter_suspend+0x1f0/0x440

[ 1.890764] [<ffff0000085baca0>] cdns3_runtime_suspend+0x48/0x88

[ 1.896776] [<ffff0000084cf398>] pm_generic_runtime_suspend+0x28/0x40

[ 1.903223] [<ffff0000084dc3e8>] genpd_runtime_suspend+0x88/0x1d8

[ 1.909320] [<ffff0000084d0e08>] __rpm_callback+0x70/0x98

[ 1.914724] [<ffff0000084d0e50>] rpm_callback+0x20/0x88

[ 1.919954] [<ffff0000084d1b2c>] rpm_suspend+0xf4/0x4c8

[ 1.925184] [<ffff0000084d20fc>] rpm_idle+0x124/0x168

[ 1.930240] [<ffff0000084d26c0>] pm_runtime_work+0xa0/0xb8

[ 1.935732] [<ffff0000080dc1dc>] process_one_work+0x1dc/0x380

[ 1.941481] [<ffff0000080dc3c8>] worker_thread+0x48/0x4d0

[ 1.946885] [<ffff0000080e2408>] kthread+0xf8/0x100
[ 1.957080] handlers:

[ 1.959350] [<ffff0000085ba668>] cdns3_irq

[ 1.963449] Disabling IRQ #36

 Kindly provide a solution to solve this issue.

Thanks & Regards,

Anjali

Hello,

I am new in formal verification and I have a concept question about how to verify an I2C Slave block.

I think the response should be valid for any serial interface which needs to receive information for several clocks before making an action.

The the protocol description is the following: 

I have a serial clock (SCL), Serial Data Input (SDI) and Serial Data Output (SDO), all are ports of the I2C Slave block.

The protocol looks like this:

The first byte which is received by the slave consists in 7bits of sensor address and the 8th bit is the command 0/1 Write/Read.

After the first 8 bits, the slave sends an ACK (SDO = 1 for 1 clock) if the sensor address is correct.

Lets consider only this case, where I want to verify that the slave responds with an ACK if the sensor address is correct.

The only solution I found so far was to use the internal buffer from the block which saves the received bits during 8 clocks. The signal is called shift_s.

I also needed to use internal chip state (state_s) and an internal counter (shift_count_s).

Instead of doing an direct check of the SDO(sdo_o) depending on SDI (sdi_d_i), I used the internal shift_s register.

My question is if my approach is the correct one or there is a possibility to write the verification at a blackbox level.

Below you have the 2 properties: first checks connection from SDI to internal buffer, the second checks the connection between internal buffer and output.

property prop_i2c_sdi_store;
  @(posedge sclk_n_i)
  $past(i2c_bl.state_s == `STATE_RECEIVE_I2C_ADDR)
    |-> i2c_bl.shift_s == byte'({ $past(i2c_bl.shift_s), $past(sdi_d_i)});
endproperty
APF_I2C_CHECK_SDI_STORE: assert property(prop_i2c_sdi_store);

property prop_i2c_sensor_addr(sens_addr_sel, sens_addr);
@(posedge sclk_n_i) (i2c_bl.state_s == `STATE_RECEIVE_I2C_ADDR) && (i2c_addr_i == sens_addr_sel) && (i2c_bl.shift_count_s == 7)
  ##1 (i2c_bl.shift_s inside {sens_addr, sens_addr+1}) |-> sdo_o;
endproperty
APF_I2C_CHECK_SENSOR_ADDR0: assert property(prop_i2c_sensor_addr(0, `I2C_SENSOR_ADDRESS_A0));
APF_I2C_CHECK_SENSOR_ADDR1: assert property(prop_i2c_sensor_addr(1, `I2C_SENSOR_ADDRESS_A1));
APF_I2C_CHECK_SENSOR_ADDR2: assert property(prop_i2c_sensor_addr(2, `I2C_SENSOR_ADDRESS_A2));
APF_I2C_CHECK_SENSOR_ADDR3: assert property(prop_i2c_sensor_addr(3, `I2C_SENSOR_ADDRESS_A3));

PS: i2c_addr_i is address selection for the slave (there are 4 configurable sensor addresses, but this is not important for the case).

Thank you!

Hi,

I need to design EPC8002 eGaN switch in cadence. Can someone provide me step by step guide on hoe to add EPC8002 into my cadence. I am working on BCD180.

Thank you 

Ihsan

Virtuoso Studio IC23.1 ISR7 production release is now available for download.(read more)

At a bustling Cadence event, we met Adrian, an intern at a startup who immerses himself in Cadence tools for his research and work.

Adrian was enthusiastic about the innovative technologies at his disposal but faced a significant challenge: internet access was limited to a single machine for new joiners, forcing interns to wait in line for their turn to use online resources.

Adrian's excitement soared when he discovered a game-changing solution: Doc Assistant. The cloud-based help viewer, Doc Assistant, ships with all Cadence tools, enabling Adrian to access help resources offline from any machine equipped with the software. This meant Adrian could continue his research and work seamlessly, irrespective of internet availability!

Meeting Cadence users and customers at such events has given us the opportunity to showcase how they can benefit from the diverse features that Doc Assistant offers.

With that note, welcome back to our Doc Assistant A-Z blog series! In Part 1, we explored key features and benefits that our innovative viewer brings to the table. Today, in Part 2, we'll dive deeper into the advanced functionalities and customization options that make Doc Assistant indispensable for its users.

Whether you're looking to streamline your workflow or enhance your user experience, this blog will provide the insights you need to fully leverage the capabilities of our documentation viewer. Let’s get started!

What Makes Doc Assistant Stand Out?

Here are a few (more) cool features of Doc Assistant!

That's not all. We have more coming your way. Until next time, take care and stay tuned for our next edition!

Want to Know More?

For any questions or general feedback, write to docassistant.support@cadence.com.

Subscribe to receive email notifications about our latest Custom IC Design blog posts.

Happy reading!

-Priya Sriram, on behalf of the Doc Assistant Team

Virtuoso Studio IC23.1 ISR8 production release is now available for download.(read more)

This blog explores how Virtuoso Studio Net Tracer can help you perform a design review.

We’ll use the net connectivity option, which allows the user to get a clean highlighted net. You can use the Net Tracer tool to highlight the nets. You can find the Net Tracer command under the connectivity pulldown menu in the layout window.

Trace manager and the ability to display different islands on the same net with other colors, you can identify and connect the unconnected islands as you wish.

The Net Tracer utility traces the nets in the physical view (layout). The trace is a highlighted net, which is a non-selectable object. The Net Tracer utility is available from Virtuoso Layout Suite XL onwards. You can use this utility based on your specific needs and preferences.

For a better understanding of the Net Tracer feature, let’s see one scenario between the circuit designer and layout engineer for a layout design review.

Circuit designer: Can we go through the routed input nets “inm” and “inp”?

Layout engineer: From the below layout view where they are highlighted using the XL connectivity, today I will use Net Tracer utility for the design review.

Circuit designer: I have never heard of this feature. Let's see how it works.

Layout engineer: Sure, now we turn on the Net Tracer toolbar using the below option.

You see the Net Tracer options form here:

As you can see on my screen, I have opened the layout view and engaged the Net Tracer utility.

Net Tracer allows shapes to be traced on a net in two tracing modes, namely, physical and logical, where shapes on the same net are physically or logically connected.

Physical tracing gathers all the shapes physically connected on the same net.

Logical tracing gathers all the shapes assigned to the same net. It highlights the net as in the source design (schematic). It will highlight shapes on the same net, even if they are isolated shapes that are not physically connected.

For this scenario, let us use physical tracing for input nets “inm” and “inp."

Highlighted nets are shown below:

Net “inm”                    Net “inp”                   Nets “inm” and “inp” 

Net Tracer has features like physical and logical tracing, preview, step-by-step mode, ease of tracing a net on a shape out of multiple underlying shapes, and so on.

Let us explore logical tracing for output nets “outm” and “outp”:

Here, you can see how to enable true color and halo before enabling logical tracing to identify the metal route. After enabling the true color halo, enable the logical trace.

Here, I am opening the trace manager to search “outm” and “outp” and click trace. That will trace the particular nets as shown.

Net Tracer has a preview feature, which is helpful in terms of the number of previewed objects. This preview capability hints at how the trace would appear when you create it. This useful feature in Virtuoso Studio highlights both completed and incomplete nets, helping the user better understand the status of the highlighted nets.

Circuit designer: Thanks for the design review. You have done good work. Net Tracer clearly shows both types of tracing, and it was even easy for the circuit designer to understand.

Layout engineer: Let me share the link to the Net Tracer RAK, where other layout engineers can explore many more amazing features of the Net Tracer.

Do You Have Access to the Cadence Support Portal?

If not, follow the steps below to create your account.

• On the Cadence Support portal, select Register Now and provide the requested information on the Registration page.
• You will need an email address and host ID to sign up.
• If you need help with registration, contact support@cadence.com.

To stay up to date with the latest news and information about Cadence training and webinars, subscribe to the Cadence Training emails.

If you have questions about courses, schedules, online, public, or live onsite training, reach out to us at Cadence Training.

For any questions, general feedback, or future blog topic suggestions, please leave a comment.

Become Cadence Certified

Cadence Training Services now offers digital badges for this training course. These badges indicate proficiency in a certain technology or skill and give you a way to validate your expertise to managers and potential employers. You can highlight your expertise by adding these digital badges to your email signature or any social media platform, such as Facebook or LinkedIn. To become Cadence Certified, you can find additional information here.

Related Resources

About Knowledge Booster Training Bytes

Knowledge Booster Training Bytes is an online journal that relays information about Cadence Training videos, online courses, and upcoming webinars that are available in the Learning section of the Cadence Learning and Support portal. This blog category brings you direct links to these videos, courses, and other related material on a regular basis.

Sandhya.

On behalf of the Cadence Training team

Virtuoso Studio IC23.1 ISR9 production release is now available for download.(read more)

The SPECTRE 24.1 release is now available for download at Cadence Downloads. For information on supported platforms and other release compatibility information, see the README.txt file in the installation hierarchy.(read more)

Virtuoso Studio IC23.1 ISR10 production release is now available for download.(read more)

I have managed to convert our old schematic and PCD file to from Layout 16.2 to 17.4

I have exported the footprints and moved them to the correct lib directory. 

I get no DRC errors and I can build a new netlist file. The problem is I can't get the PCB editor to update using the new netlist and get the following error:

I cannot figure out how to fix the Name is too long error. 

(---------------------------------------------------------------------)

(                                                                     )

(    Allegro Netrev Import Logic                                      )

(                                                                     )

(    Drawing          : 70055R2.brd                                   )

(    Software Version : 17.4S023                                      )

(    Date/Time        : Tue Dec 14 18:54:25 2021                      )

(                                                                     )

(---------------------------------------------------------------------)

------ Directives ------------

Ripup etch:                  Yes

Ripup delete first segment:  No

Ripup retain bondwire:       No

Ripup symbols:               IfSame

Missing symbol has error:    No

DRC update:                  Yes

Schematic directory:         'C:/AFS/70055 PCB Test 2'

Design Directory:            'C:/AFS/70055 PCB Test 2'

Old design name:             'C:/AFS/70055 PCB Test 2/70055R2.brd'

New design name:             'C:/AFS/70055 PCB Test 2/70055R2.brd'

CmdLine: netrev -$ -i C:/AFS/70055 PCB Test 2 -x -u -t -y 2 -h -z -q netrev_constraint_report.xml C:/AFS/70055 PCB Test 2/#Taaaaae57776.tmp

------ Preparing to read pst files ------

Starting to read C:/AFS/70055 PCB Test 2/pstchip.dat 

   Finished reading C:/AFS/70055 PCB Test 2/pstchip.dat (00:00:00.02)

Starting to read C:/AFS/70055 PCB Test 2/pstxprt.dat 

   Finished reading C:/AFS/70055 PCB Test 2/pstxprt.dat (00:00:00.00)

Starting to read C:/AFS/70055 PCB Test 2/pstxnet.dat 

   Finished reading C:/AFS/70055 PCB Test 2/pstxnet.dat (00:00:00.00)

------ Oversights/Warnings/Errors ------

#1   ERROR(SPMHNI-176): Device library error detected.

ERROR(SPMHNI-189): Problems with the name of device 'SW DPDT_9_SWITCH_OTTO_ALT_SW DPDT': 'Name is too long.'.

ERROR(SPMHNI-170): Device 'SW DPDT_9_SWITCH_OTTO_ALT_SW DP' has library errors. Unable to transfer to Allegro.

#2   ERROR(SPMHNI-176): Device library error detected.

ERROR(SPMHNI-189): Problems with the name of device 'SW DPDT_10_SWITCH_OTTO_LIGHTS_SW DPDT': 'Name is too long.'.

ERROR(SPMHNI-170): Device 'SW DPDT_10_SWITCH_OTTO_LIGHTS_S' has library errors. Unable to transfer to Allegro.

#3   ERROR(SPMHNI-176): Device library error detected.

ERROR(SPMHNI-189): Problems with the name of device 'SW DPDT_7_SWITCH_OTTO_ALT_SW DPDT': 'Name is too long.'.

ERROR(SPMHNI-170): Device 'SW DPDT_7_SWITCH_OTTO_ALT_SW DP' has library errors. Unable to transfer to Allegro.

#4   ERROR(SPMHNI-176): Device library error detected.

ERROR(SPMHNI-189): Problems with the name of device 'SW DPDT_3_SWITCH_OTTO_MASTER_SW DPDT': 'Name is too long.'.

ERROR(SPMHNI-170): Device 'SW DPDT_3_SWITCH_OTTO_MASTER_SW' has library errors. Unable to transfer to Allegro.

#5   ERROR(SPMHNI-176): Device library error detected.

ERROR(SPMHNI-189): Problems with the name of device 'SW DPDT_6_SWITCH_OTTO_LIGHTS_SW DPDT': 'Name is too long.'.

ERROR(SPMHNI-170): Device 'SW DPDT_6_SWITCH_OTTO_LIGHTS_SW' has library errors. Unable to transfer to Allegro.

#6   ERROR(SPMHNI-176): Device library error detected.

ERROR(SPMHNI-189): Problems with the name of device 'SW DPDT_3_SWITCH_OTTO_MASTER_DPDT': 'Name is too long.'.

ERROR(SPMHNI-170): Device 'SW DPDT_3_SWITCH_OTTO_MASTER_DP' has library errors. Unable to transfer to Allegro.

#7   ERROR(SPMHNI-176): Device library error detected.

ERROR(SPMHNI-189): Problems with the name of device 'CONNECTOR DB15_DSUBVPTM15_CONNECTOR DB15': 'Name is too long.'.

ERROR(SPMHNI-170): Device 'CONNECTOR DB15_DSUBVPTM15_CONNE' has library errors. Unable to transfer to Allegro.

#8   ERROR(SPMHNI-176): Device library error detected.

ERROR(SPMHNI-189): Problems with the name of device 'CONNECTOR DB9_DSUBVPTM9_CONNECTOR DB9': 'Name is too long.'.

ERROR(SPMHNI-170): Device 'CONNECTOR DB9_DSUBVPTM9_CONNECT' has library errors. Unable to transfer to Allegro.

#9   ERROR(SPMHNI-175): Netrev error detected.

ERROR(SPMHDB-195): Error processing 'M6': Text line is outside of the extents..

------ Library Paths ------

MODULEPATH =  . 

           C:/Cadence/SPB_17.4/share/local/pcb/modules 

PSMPATH =  . 

           symbols 

           .. 

           ../symbols 

           C:/Cadence/SPB_17.4/share/local/pcb/symbols 

           C:/Cadence/SPB_17.4/share/pcb/pcb_lib/symbols 

           C:/Cadence/SPB_17.4/share/pcb/allegrolib/symbols 

           C:/Cadence/SPB_17.4/share/pcb/pcb_lib/symbols 

PADPATH =  . 

           symbols 

           .. 

           ../symbols 

           C:/Cadence/SPB_17.4/share/local/pcb/padstacks 

           C:/Cadence/SPB_17.4/share/pcb/pcb_lib/symbols 

           C:/Cadence/SPB_17.4/share/pcb/allegrolib/symbols 

           C:/Cadence/SPB_17.4/share/pcb/pcb_lib/symbols 

------ Summary Statistics ------

#10  Run stopped because errors were detected

netrev run on Dec 14 18:54:25 2021

   DESIGN NAME : '70055R2'

   PACKAGING ON Nov  2 2021 14:32:04

   COMPILE 'logic'

   CHECK_PIN_NAMES OFF

   CROSS_REFERENCE OFF

   FEEDBACK OFF

   INCREMENTAL OFF

   INTERFACE_TYPE PHYSICAL

   MAX_ERRORS 500

   MERGE_MINIMUM 5

   NET_NAME_CHARS '#%&()*+-./:=>?@[]^_`|'

   NET_NAME_LENGTH 24

   OVERSIGHTS ON

   REPLACE_CHECK OFF

   SINGLE_NODE_NETS ON

   SPLIT_MINIMUM 0

   SUPPRESS   20

   WARNINGS ON

 10 errors detected

 No oversight detected

 No warning detected

cpu time      0:00:27

elapsed time  0:00:00

Hello. I am using Cadence 17.4 tools. When I open a package symbol (.dra) or board file (.brd) in Allegro that was created in an older version of the tool I get a message like this one (as expected):

"The design created using release 17.2 will be updated for compatibility with the current software..."

If I create a symbol or board file from scratch in the 17.4 tool then open it later, I get the same message. (always referring to version 17.2 which is the previous version I was using here).

So far this has not caused me any problems, but I would like to understand why it is doing this in case I have something setup incorrectly.

I only have version 17.4 installed. I am not exporting to a downrev version when I save (i.e. not using File->Export->Downrev design…) and in User Preferences->Drawing I don’t have anything selected for database_compatibility_mode. What else might I check?

FYI here is the tool version information that I see after selecting Help->About Symbol:

OrCAD PCB Designer Standard 17.4-2019 S012 [10/26/2020] Windows SPB 64-bit Edition

Thanks -Jason

hello,

We have a number of workstations with version 17.2 that work on a floating license server

We want to know if it can be upgraded to version 17.4

If so, should the floating license server be upgraded as well?

In addition, how can you know where the license was purchased from?

Thanks!

I decided it was time to update my spectre install (currently a version of Spectre211).  Since 241 was a larger number than 211 I thought it would be a good idea (LOL)

Anyway, the simulator failed to run, and since I didn't have the time to debug why, I reverted to 211.

What's the difference in the two?

Hello All,

Following is the einstein's puzzle solved by cadence Incisive92  (solved in less than 3 seconds -> FAST!!!!!!)

Thanks,

Vinay Honnavara

Verification engineer at Keyu Tech

vinayh@keyutech.com

 // Author: Vinay Honnavara

// Einstein formulated this problem : he said that only 2% in the world can solve this problem
// There are 5 different parameters each with 5 different attributes
// The following is the problem

// -> In a street there are five houses, painted five different colors (RED, GREEN, BLUE, YELLOW, WHITE)

// -> In each house lives a person of different nationality (GERMAN, NORWEGIAN, SWEDEN, DANISH, BRITAIN)

// -> These five homeowners each drink a different kind of beverage (TEA, WATER, MILK, COFFEE, BEER),

// -> smoke different brand of cigar (DUNHILL, PRINCE, BLUE MASTER, BLENDS, PALL MALL)

// -> and keep a different pet (BIRD, CATS, DOGS, FISH, HORSES)


///////////////////////////////////////////////////////////////////////////////////////
// *************** Einstein's riddle is: Who owns the fish? ***************************
///////////////////////////////////////////////////////////////////////////////////////

/*
Necessary clues:

1. The British man lives in a red house.
2. The Swedish man keeps dogs as pets.
3. The Danish man drinks tea.
4. The Green house is next to, and on the left of the White house.
5. The owner of the Green house drinks coffee.
6. The person who smokes Pall Mall rears birds.
7. The owner of the Yellow house smokes Dunhill.
8. The man living in the center house drinks milk.
9. The Norwegian lives in the first house.
10. The man who smokes Blends lives next to the one who keeps cats.
11. The man who keeps horses lives next to the man who smokes Dunhill.
12. The man who smokes Blue Master drinks beer.
13. The German smokes Prince.
14. The Norwegian lives next to the blue house.
15. The Blends smoker lives next to the one who drinks water.
*/




typedef enum bit [2:0]  {red, green, blue, yellow, white} house_color_type;
typedef enum bit [2:0]  {german, norwegian, brit, dane, swede} nationality_type;
typedef enum bit [2:0]  {coffee, milk, water, beer, tea} beverage_type;
typedef enum bit [2:0]  {dunhill, prince, blue_master, blends, pall_mall} cigar_type;
typedef enum bit [2:0]  {birds, cats, fish, dogs, horses} pet_type;




class Einstein_problem;

    rand house_color_type house_color[5];
    rand nationality_type nationality[5];
    rand beverage_type beverage[5];
    rand cigar_type cigar[5];
    rand pet_type pet[5];
        rand int arr[5];
    
    constraint einstein_riddle_solver {
    
        
    
        foreach (house_color[i])
            foreach (house_color[j])
               if (i != j)
                house_color[i] != house_color[j];
        foreach (nationality[i])
            foreach (nationality[j])
               if (i != j)
                nationality[i] != nationality[j];
        foreach (beverage[i])
            foreach (beverage[j])
               if (i != j)
                beverage[i] != beverage[j];
        foreach (cigar[i])
            foreach (cigar[j])
               if (i != j)
                cigar[i] != cigar[j];
        foreach (pet[i])
            foreach (pet[j])
               if (i != j)
                pet[i] != pet[j];
    
    
        //1) The British man lives in a red house.
        foreach(nationality[i])
                (nationality[i] == brit) -> (house_color[i] == red);
                
        
        //2) The Swedish man keeps dogs as pets.
        foreach(nationality[i])
                (nationality[i] == swede) -> (pet[i] == dogs);
                
                
        //3) The Danish man drinks tea.        
        foreach(nationality[i])
                (nationality[i] == dane) -> (beverage[i] == tea);
        
        
        //4) The Green house is next to, and on the left of the White house.
        foreach(house_color[i])        
                 if (i<4)
                    (house_color[i] == green) -> (house_color[i+1] == white);
        
        
        //5) The owner of the Green house drinks coffee.
        foreach(house_color[i])
                (house_color[i] == green) -> (beverage[i] == coffee);
                
        
        //6) The person who smokes Pall Mall rears birds.
        foreach(cigar[i])
                (cigar[i] == pall_mall) -> (pet[i] == birds);
        
        
        //7) The owner of the Yellow house smokes Dunhill.
        foreach(house_color[i])
                (house_color[i] == yellow) -> (cigar[i] == dunhill);
        
        
        //8) The man living in the center house drinks milk.
        foreach(house_color[i])
                if (i==2) // i==2 implies the center house (0,1,2,3,4) 2 is the center
                    beverage[i] == milk;
        
        
        
        //9) The Norwegian lives in the first house.
        foreach(nationality[i])        
                if (i==0) // i==0 is the first house
                    nationality[i] == norwegian;
        
        
        
        //10) The man who smokes Blends lives next to the one who keeps cats.
        foreach(cigar[i])        
                if (i==0) // if the man who smokes blends lives in the first house then the person with cats will be in the second
                    (cigar[i] == blends) -> (pet[i+1] == cats);
        
        foreach(cigar[i])        
                if (i>0 && i<4) // if the man is not at the ends he can be on either side
                    (cigar[i] == blends) -> (pet[i-1] == cats) || (pet[i+1] == cats);
        
        foreach(cigar[i])        
                if (i==4) // if the man is at the last
                    (cigar[i] == blends) -> (pet[i-1] == cats);
        
        foreach(cigar[i])        
                if (i==4)
                    (pet[i] == cats) -> (cigar[i-1] == blends);
        
        
        //11) The man who keeps horses lives next to the man who smokes Dunhill.
        foreach(pet[i])
                if (i==0) // similar to the last case
                    (pet[i] == horses) -> (cigar[i+1] == dunhill);
        
        foreach(pet[i])        
                if (i>0 & i<4)
                    (pet[i] == horses) -> (cigar[i-1] == dunhill) || (cigar[i+1] == dunhill);
                    
        foreach(pet[i])        
                if (i==4)
                    (pet[i] == horses) -> (cigar[i-1] == dunhill);
                    


        //12) The man who smokes Blue Master drinks beer.
        foreach(cigar[i])
                (cigar[i] == blue_master) -> (beverage[i] == beer);
        
        
        //13) The German smokes Prince.
        foreach(nationality[i])        
                (nationality[i] == german) -> (cigar[i] == prince);
        

        //14) The Norwegian lives next to the blue house.
        foreach(nationality[i])
                if (i==0)
                    (nationality[i] == norwegian) -> (house_color[i+1] == blue);
        
        foreach(nationality[i])        
                if (i>0 & i<4)
                    (nationality[i] == norwegian) -> (house_color[i-1] == blue) || (house_color[i+1] == blue);
        
        foreach(nationality[i])        
                if (i==4)
                    (nationality[i] == norwegian) -> (house_color[i-1] == blue);
        

        //15) The Blends smoker lives next to the one who drinks water.            
        foreach(cigar[i])            
                if (i==0)
                    (cigar[i] == blends) -> (beverage[i+1] == water);
        
        foreach(cigar[i])        
                if (i>0 & i<4)
                    (cigar[i] == blends) -> (beverage[i-1] == water) || (beverage[i+1] == water);
                    
        foreach(cigar[i])        
                if (i==4)
                    (cigar[i] == blends) -> (beverage[i-1] == water);
        
    } // end of the constraint block
    


    // display all the attributes
    task display ;
        foreach (house_color[i])
            begin
                $display("HOUSE : %s",house_color[i].name());
            end
        foreach (nationality[i])
            begin
                $display("NATIONALITY : %s",nationality[i].name());
            end
        foreach (beverage[i])
            begin
                $display("BEVERAGE : %s",beverage[i].name());
            end
        foreach (cigar[i])
            begin
                $display("CIGAR: %s",cigar[i].name());
            end
        foreach (pet[i])
            begin
                $display("PET : %s",pet[i].name());
            end
        foreach (pet[i])
            if (pet[i] == fish)
                $display("THE ANSWER TO THE RIDDLE : The %s has %s ", nationality[i].name(), pet[i].name());
    
    endtask // end display
    
    
endclass




program main ;

    initial
        begin
            Einstein_problem ep;
            ep = new();
            if(!ep.randomize())
                $display("ERROR");
            ep.display();
        end
endprogram // end of main

        

RF Design Solutions for Next-Generation Products The International Microwave Symposium (IMS2022), otherwise known as Microwave Week, was recently held (June 19-24) at the Denver Convention center, returning to its long-standing g...(read more)

The Sigrity and Systems Analysis (SIGRITY/SYSANLS) 2022.1 HF2 release is now available for download at Cadence Downloads. For the list of CCRs fixed in the 2022.1 HF2 release, see the README.txt file in the installation hierarchy.(read more)

Hi, 
In the MATLAB, I am using cds_srr and cds_innersrr commands. Although I set the path to the spectre root, I face this error:

One or more output arguments not assigned during call to "cds_innersrr".

Error in cds_srr (line 20)
sig = cds_innersrr(dirname, dataset, signame, verbose);

Error in techsweep_spectre_run (line 64)
struct_n = cds_srr(c.outfile, c.sweep, params_n{1});

I would highly appreciate it if you could help me.

Sample clues

11 across: Chandigarh’s is 0172 (3,4)

21 across: He’s a loser, baby (4)

1 down: Garment meant to shape the torso (6)

12 down: It’s slogan: “Life, Liberty and the Pursuit” (8)

18 down: Noise made by badminton players? (6)

Extrowords © 2007 IndiaUncut.com. All rights reserved.
India Uncut * The IU Blog * Rave Out * Extrowords * Workoutable * Linkastic

Sample clues

5 across: The US president’s bird (3,5,3)

11 down: Group once known as the Quarrymen (7)

10 across: Cavalry sword (5)

19 across: Masonic ritual (5,6)

1 down: Pioneer of Ostpolitik (6)

Extrowords © 2007 IndiaUncut.com. All rights reserved.
India Uncut * The IU Blog * Rave Out * Extrowords * Workoutable * Linkastic

The ICADVM20.1 ISR26 and IC6.1.8 ISR26 production releases are now available for download.(read more)

The ICADVM20.1 ISR27 and IC6.1.8 ISR27 production releases are now available for download.(read more)

Hai Community,

What are the differences between the Cadence OrCAD / Allegro 24.1 with the Altium Designer 24.

Can I get the grid matrix difference between these two tools?

Regards,

Rohit Rohan

Cyprus is ranked first in fDi’s Island Economies of the Future rankings, followed by the Dominican Republic and Sri Lanka. Cathy Mullan and Naomi Davies detail the results.

New York continues to reign as leader of fDi’s American Cities of the Future 2019/20 ranking. San Francisco retains second place with Toronto rising to third. Naomi Davies reports.

A more detailed look at fDi's judges’ top five American Cities of the Future 2019/20 for FDI strategy. Naomi Davies reports.

Research by fDi Intelligence reveals which countries receive more than their ‘expected share’ of FDI. 

London has been named fDi’s inaugural Fintech Location of the Future for 2019/20, followed by Singapore and Belfast. 

Singapore has retained its place at the top of fDi's Asia-Pacific Cities of the Future ranking, with Shanghai and Tokyo completing the top three list. 

The UAE's DMCC takes home the top prize in fDi’s Global Free Zones of the Year for a fifth consecutive year. 

Research by fDi Intelligence reveals which cities received the most tech start-up FDI relative to their population between 2016 and 2018, with European cities coming out on top.

Australia tops the FDI Strategy category of fDi's Tourism Locations of the Future 2019/20 rankings, followed by Costa Rica and Azerbaijan.

Lithuania's Go Vilnius has been named fDi’s IPA of the Year for 2019, and organisations from across the globe are commended for their investment promotion and economic development activities. 

A look at the results of fDi’s rankings throughout 2019 finds that Singapore and New York dominated the year’s league tables, followed by Shanghai, Tokyo and London

In spite of the uncertainty caused by Brexit, London retains its position as fDi's European City of the Future for 2020/21, while Paris keeps the regional crown.

London has retained its position as fDi’s European City of the Future, while Paris has climbed to second place, knocking Dublin into the third spot. 

London is crowned best major city in Europe in fDi's FDI Strategy category, with Glasgow, Vilnius, Reykjavik and Galway also winning out.

Paris Region has kept its fDi European Region of the Future title, while Dublin Region holds on to second place and North Rhine-Westphalia is in third.