Wormtrack is a network IDS that helps detect scanning worms on a local area network by monitoring anomalous ARP traffic. This allows detection of scanning threats on the network, without having privileged access on a switch to set up a dedicated monitor port, nor does it require a constant updating of the rules engine to address new threats.

Hackers Information Report #10. Contains Defcon 7 in a nutshell, Flying Below The Radar: Avoiding IDS Systems, BeOS Revealed, RISC, CISC and The concept of the Power-PC, and Hacker News.

Hackers Information Report #10. Contains Defcon 7 in a nutshell, Flying Below The Radar: Avoiding IDS Systems, BeOS Revealed, RISC, CISC and The concept of the Power-PC, and Hacker News.

HP Security Bulletin - A potential security vulnerability has been identified in the Aries PA-RISC emulation software running on HP-UX IA-64 platforms only. This vulnerability may allow local unauthorized access.

Ubuntu Security Notice USN-715-1 - Hugo Dias discovered that the ATM subsystem did not correctly manage socket counts. It was discovered that the inotify subsystem contained watch removal race conditions. Dann Frazier discovered that in certain situations sendmsg did not correctly release allocated memory. Helge Deller discovered that PA-RISC stack unwinding was not handled correctly. It was discovered that the ATA subsystem did not correctly set timeouts. It was discovered that the ib700 watchdog timer did not correctly check buffer sizes.

John the Ripper is a fast password cracker, currently available for many flavors of Unix (11 are officially supported, not counting different architectures), DOS, Win32, and BeOS. Its primary purpose is to detect weak Unix passwords, but a number of other hash types are supported as well.

John the Ripper is a fast password cracker, currently available for many flavors of Unix (11 are officially supported, not counting different architectures), DOS, Win32, and BeOS. Its primary purpose is to detect weak Unix passwords, but a number of other hash types are supported as well.

John the Ripper is a fast password cracker, currently available for many flavors of Unix (11 are officially supported, not counting different architectures), DOS, Win32, and BeOS. Its primary purpose is to detect weak Unix passwords, but a number of other hash types are supported as well.

John the Ripper is a fast password cracker, currently available for many flavors of Unix (11 are officially supported, not counting different architectures), DOS, Win32, and BeOS. Its primary purpose is to detect weak Unix passwords, but a number of other hash types are supported as well.

John the Ripper is a fast password cracker, currently available for many flavors of Unix (11 are officially supported, not counting different architectures), DOS, Win32, and BeOS. Its primary purpose is to detect weak Unix passwords, but a number of other hash types are supported as well.

John the Ripper is a fast password cracker, currently available for many flavors of Unix (11 are officially supported, not counting different architectures), DOS, Win32, and BeOS. Its primary purpose is to detect weak Unix passwords, but a number of other hash types are supported as well.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro. This is the community enhanced version.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro. This is the community enhanced version.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro. This is the community enhanced version.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro. This is the community enhanced version.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro. This is the community enhanced version.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro. This is the community enhanced version.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro.

John the Ripper is a fast password cracker, currently available for many flavors of Unix, Windows, DOS, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. It supports several crypt(3) password hash types commonly found on Unix systems, as well as Windows LM hashes. On top of this, many other hash types are added with contributed patches, and some are added in John the Ripper Pro.

No information is available for this file.

10xxx Phone Code Lookup (no 10-10-xxx yet). From Attrition

ShokDial 4.1, an excellent war dialer for linux. Another great tool from w00w00. (

DTMF dialer for X. Uses sound card. Screenshot.

WARD v1.7 is a classic war dialer: it scans a list of phone numbers, finding the ones where a modem is answering the call. WARD can generate phone numbers lists based on a user-supplied mask, in incremental or random order. Remember to change some defines to make it fit your current system configuration. WARD is one of the fastest PBX scanners around (and possibly the best for UNIX environment). Tested on OpenBSD and Linux.

WARD v1.8 is a classic war dialer - it scans a list of phone numbers, finding the ones where a modem is answering the call. WARD can generate phone numbers lists based on a user-supplied mask, in incremental or random order. Remember to change some defines to make it fit your current system configuration. WARD is one of the fastest PBX scanners around (and possibly the best for UNIX environment). Tested on OpenBSD and Linux.

WARD v1.9 is a classic war dialer - it scans a list of phone numbers, finding the ones where a modem is answering the call. WARD can generate phone numbers lists based on a user-supplied mask, in incremental or random order. Remember to change some defines to make it fit your current system configuration. WARD is one of the fastest PBX scanners around (and possibly the best for UNIX environment). Tested on OpenBSD, Linux, and Windows under Cygwin.

Iwar is a war dialer written for Unix type (Linux/OpenBSD/etc) operating systems. It supports a nice curses based front end, ASCII/MySQL logging, system identification, multiple modems support, random/sequential dialing, key stroke logging, and more.

IWar is a war dialer used for auditing your PSTN (phone) network. Its features include random/sequential dialing, Voice over IP using the IAX2 (Intra-Asterisk eXchange) protocol, ASCII flat file and MySQL logging, a curses-based front end, key stroke marking, multiple modem support, several methods of tone detection, save/load state, banner detections (to determine remote system types) and blacklist support.

Tenshi is a log monitoring program, designed to watch a log file for lines matching user defined regular expression and report on the matches. The regular expressions are assigned to queues which have an alert interval and a list of mail recipients. Queues can be set to send a notification as soon as there is a log line assigned to it, or to send periodic reports.

Network Interface Events Logging Daemon is a tool that receives notifications from the kernel through the rtnetlink socket, and generates logs related to link state, neighbor cache(ARP,NDP), IP address(IPv4,IPv6), route, FIB rules.

Network Interface Events Logging Daemon is a tool that receives notifications from the kernel through the rtnetlink socket, and generates logs related to link state, neighbor cache(ARP,NDP), IP address(IPv4,IPv6), route, FIB rules.

Tenshi is a log monitoring program, designed to watch a log file for lines matching user defined regular expression and report on the matches. The regular expressions are assigned to queues which have an alert interval and a list of mail recipients. Queues can be set to send a notification as soon as there is a log line assigned to it, or to send periodic reports.

iXKeylog is an X11 keylogger for Unix that basically uses xlib to interact with the users keyboard. It will listen for certain X11 events and then trigger specific routines to handle these events.

Network Interface Events Logging Daemon is a tool that receives notifications from the kernel through the rtnetlink socket, and generates logs related to link state, neighbor cache (ARP,NDP), IP address (IPv4,IPv6), route, FIB rules.

Tenshi is a log monitoring program, designed to watch a log file for lines matching user defined regular expression and report on the matches. The regular expressions are assigned to queues which have an alert interval and a list of mail recipients. Queues can be set to send a notification as soon as there is a log line assigned to it, or to send periodic reports.

ZedLog is a robust cross-platform input logging tool (or key logger). It is based on a flexible data logging system which makes it easy to get the required data. It captures all keyboard and mouse events, has a full GUI, and supports logging to a file and basic hiding.

Network Interface Events Logging Daemon is a tool that receives notifications from the kernel through the netlink socket and generates logs related to link state, neighbor cache (ARP,NDP), IP address (IPv4,IPv6), route, FIB rules, and traffic control.

tenshi is a log monitoring program, designed to watch one or more log files for lines matching user defined regular expressions and report on the matches. The regular expressions are assigned to queues which have an alert interval and a list of mail recipients. Queues can be set to send a notification as soon as there is a log line assigned to it, or to send periodic reports.

Network Interface Events Logging Daemon is a tool that receives notifications from the kernel through the netlink socket and generates logs related to link state, neighbor cache (ARP,NDP), IP address (IPv4,IPv6), route, FIB rules, and traffic control.

tenshi is a log monitoring program, designed to watch one or more log files for lines matching user defined regular expressions and report on the matches. The regular expressions are assigned to queues which have an alert interval and a list of mail recipients. Queues can be set to send a notification as soon as there is a log line assigned to it, or to send periodic reports.