A method and system for a sensor system of a device is disclosed. The sensor system includes a first MEMS sensor (FMEMS), a second MEMS sensor (SMEMS) and a signal processor (SP). An excitation is imparted to the device along a first axis (FA). The FMEMS has a first primary sense axis (FPSA), moves in response to a component of the excitation along the FA aligned with the FPSA and outputs a first signal proportional to an excitation along the FPSA. The SMEMS has a second primary sense axis (SPSA), moves in response to a component of the excitation along the FA aligned with the SPSA and outputs a second signal proportional to an excitation along the SPSA. The SP combines the first signal and the second signal to output a third signal proportional to the excitation along the FA. The FA, the FPSA and the SPSA have different orientations.

A micro-electromechanical (MEMS) apparatus includes a substrate, two first anchors, a frame, and two elastic members. The substrate is provided with a reference point thereon. The frame surrounds the two first anchors, and each of the elastic members connects the corresponding first anchor and the frame. Each of the first anchors is disposed near the center of the MEMS apparatus to decrease an effect caused by warpage of the substrate. The MEMS apparatus can be applied to an MEMS sensor having a rotatable mass, such as a three-axis accelerometer or a magnetometer, to improve process yield, reliability, and measurement accuracy.

A vibration analyzing apparatus includes a vibration detecting unit set in a building where a person can reside and configured to detect vibration and output a detection signal based on the detected vibration, a mode determining unit configured to determine presence or absence of vibration of the building caused by an earthquake, and a control unit including a vibration analyzing unit configured to analyze the vibration on the basis of the detection signal, the control unit setting an analysis mode of the vibration analyzing unit. The control unit sets one of a normal time analysis mode for causing the vibration analyzing unit to analyze a vibration waveform indicated by the detection signal on the basis of a first condition and obtaining information concerning residence of the person and an earthquake analysis mode for obtaining information concerning deformation of the building.

A laser beam having desired properties is output at desired timings. A laser apparatus is a laser apparatus for use with an extreme ultraviolet light generating apparatus that generates extreme ultraviolet light at a repetition frequency which is set in advance, and may be equipped with: a semiconductor laser that outputs a laser beam when a trigger signal is input thereto; an optical switch that switches between a state in which the laser beam passes therethrough and a state in which the laser beam does not pass therethrough, provided along the optical path of the laser beam; and a control unit configured to output the trigger signal to the semiconductor laser at a frequency which is an integer multiple of the repetition frequency, and to control the optical switch such that the laser beam passes therethrough at the repetition frequency.

Electron beam generator comprising an electron emitting device adapted to emit an electron beam when heated to an elevated temperature, wherein the electron emitting device comprises a filament having a spiral portion.

A proximity sensing device includes: a light source, a sensing unit, a light guide unit, and a window. The light source emits light, which is guided by the light guide unit to the window. The emitted light reflected by an object is received by the same window. The light guide unit includes a partial-transmissive-partial-reflective (PTPR) optical element, whereby the light emitted from the light source is reflected by the PTPR optical element, while the light reflected by the object passes through the PTPR optical element. There is only one window required.

An imaging device and method are provided. Light from an object is provided as a plurality of sets of light beams to a phase difference array having a plurality of elements. The phase difference array is configured to provide different optical paths for light included within at least some of a plurality of sets of light beams. The light from the phase difference array is received at an imaging element array. The imaging element array includes a plurality of imaging elements. Information obtained from hyperspectral imaging data based on output signals of the imaging element array can be displayed.

The present invention discloses a mail detection device and method. The device comprises a broad-band terahertz generator, a collimator, a beam splitter, a fixed reflector, a movable reflector, a wave buncher, a matrix detector, an acquisition card and an information processing module; wherein the information processing module is used for generating a terahertz image of a mail to be detected according to the electric signals sent by the acquisition card when the movable reflector is motionless; and when finding suspicious articles according to the terahertz image of a mail to be detected, the information processing module controls the movable reflector to move, and generates spectral information of the suspicious articles according to an electric signal sequence sent by the acquisition card during the movement of the movable reflector.

The present disclosure provides a ray calibration device and a working method thereof, and a radiation imaging system and a working method thereof, and belongs to the field of radiation imaging technology. The present disclosure can solve the problems that the existing calibration devices have low calibration efficiency and require relatively large spaces. The ray calibration device of the present disclosure includes a driving part, a cam part and a calibration part, wherein the calibration part is located below the cam part; the driving part is adapted to drive the cam part to rotate; and the cam part is adapted to exert a force on the calibration part to enable the calibration part to move into a ray area downwards.

The present technology provides methods for increasing sensitivity of detection and/or quantification of a negatively charged analyte, e.g., an oligonucleotide, using an analytical system that comprises liquid chromatography and mass spectrometry. The methods comprise passing an acidic solution through the analytical system, i.e., through a fluidic path from the mobile phase reservoir to the detector to remove or displace, at least in part, metal ions adsorbed to charged sites in the fluidic path.

An electronic device may have a display with a cover layer. A light-based component such as an infrared-light proximity sensor or other infrared-light-based component may be aligned with a window in the display cover layer. The window may block visible light and transmit infrared light. A coating in the window may include a thin-film filter formed from a stack of inorganic dielectric layers. The thin-film filter may block visible light and transmit infrared light. The coating may also include at least one layer of material such as a semiconductor material that absorbs visible light and that passes infrared light. This material may be interposed between the thin-film filter and the display cover layer. Antireflection properties and color adjustment properties may be provided using thin-film layers between the thin-film filter and the display cover layer.

A display device comprising a first image display device comprising a light guide plate, a dimmer, and a light control device. The light control device is configured to identify a start time of change in quantity of light received by the display device, and control transmissivity of the dimmer based on quantity of light received by the display device, after a predetermined amount of time after the start time has elapsed.

Embodiments of the present invention provide a protective device including a sliding door and a housing, together forming a closed space, wherein, a guide rail is provided on the housing, and the sliding door is slidable along the guide rail to open or close the closed space. In addition, embodiments of the present invention also provide a laser Raman safety inspection apparatus including the abovementioned protective device.

A solid-state imaging device includes a detector, a count value storage, and a reader. The detector includes an avalanche amplification type light receiving element that detects a photon, and a resetter that resets an output potential of the light receiving element, and outputs a digital signal that indicates the presence or absence of incidence of a photon on the light receiving element. The count value storage performs counting by converting the digital signal output from the detector to an analog voltage, and stores the result of counting as a count value. The reader outputs an analog signal indicating the count value.

Methods for producing alcohols and oligomers contemporaneously from a hydrocarbon feed containing mixed butenes using an acid based catalyst are provided. Additionally, methods for producing fuel compositions having alcohols and oligomers prepared from mixed olefins are also provided as embodiments of the present invention. In certain embodiments, the catalyst can include a dual phase catalyst system that includes a water soluble acid catalyst and a solid acid catalyst.

A device for preparing bio-oil, a system for preparing bio-oil and a method for preparing bio-oil using the same are provided. Biomass is supplied to an inclined portion of a reactor, and high-temperature hot sand is supplied to an upper side of the biomass supplied to the inclined portion. Then, a heater heats the inclined portion. Thus, the fast pyrolysis performance of the biomass can be enhanced, thereby increasing the yield of bio-oil. Also, combustion gas produced from the heater is supplied to the interior of the reactor, so that the interior of the reactor can be simply formed under a nonoxidizing atmosphere. Accordingly, the device for preparing bio-oil can be manufactured into a very simple structure.

Embodiments presented herein describe an apparatus and method to control the conversion of carbonaceous materials, particularly biomass and those biomass resources, into a high performance solid fuel. This method, and the apparatus described as the means to accomplish this method, provides a process having a control system that enables the system to produce a fuel of uniform quality, even with a change in biomass supply.

Use of a reaction product of saturated or unsaturated aliphatic mono- or polycarboxylic acids with aliphatic polyamines for improving or boosting the separation of water from fuel oils which comprise additives with detergent action. A Fuel additive concentrate comprising the said reaction product, certain additives with detergent action and optionally dehazers, cetane number improvers and solvents or diluents.

A method comprising applying a chemical change reagent to coal prior to combustion of the coal is provided. In some instances, the chemical change reagent can include an effective amount of a material to reduce NOx emissions, SOx emissions, or both from combustion of the coal.

A ballast water treatment device attached to a vessel provided with: a line (1) through which drawn treatment target water flows; and a ballast tank (5) connected to a downstream side of the line (1). The ballast water treatment device is provided with: a filter (3) which is disposed in the line (1) and which filters the treatment target water; and a controller (7). The controller (7) causes the treatment target water to be discharged outboard from an upstream side of the filter (3) in an early stage of drawing of the treatment target water, until water quality is stabilized, and, when the water quality of treatment target water has stabilized, causes the filter (3) to filter the treatment target water. Thus, ballast water filtering can be efficiently performed.

A method includes removing glyphosate from a solution by contacting the solution with a mesoporous inorganic particle having an average pore size of greater than zero and less than about 50 nm, wherein the mesoporous inorganic particle is functionalized with a positively charged moiety selected from ammonium, amine and combinations thereof.

A method for removing glyphosate from a solution by contacting the solution with a polymeric particle including a moiety selected from the group consisting of ammonium, amine and combinations thereof, wherein the moiety is positively charged in the solution.

Methods and systems are provided for disinfecting water mains using ultraviolet (UV) light and advanced oxidation processes. One or more UV light sources are provided and secured to a movable device that moves axially in a pipe. The frequency and intensity of the UV light is determined based on characteristics of the pipe, such as its material and size. The rate at which the movable device moves through the pipe is also determined so that the interior surface of the pipe is properly disinfected. The movable device is remotely caused to move through the pipe. An oxidant supply component having a dispensing portion dispenses an oxidizing agent into the pipe. A portion of the emitted UV light may convert the dispensed oxidizing agent into additional oxidizing agents that further disinfect the pipe.

Devices and methods for characterization of analyte mixtures are provided. Some methods described herein include performing enrichment steps on a device before expelling enriched analyte fractions from the device for subsequent analysis. Also included are devices for performing these enrichment steps.

A lattice and distribution network for a stackable chromatography cassette comprising: a peripheral seal;at least one screen forming the lattice surrounded by the peripheral seal, each at least one screen comprising a plurality of struts in a latticed arrangement;a first internal distribution network fluidly coupled to the lattice and surrounded by the peripheral seal;a second internal distribution network disposed opposite the first internal distribution network, fluidly coupled to the lattice and surrounded by the peripheral seal;wherein a direction of fluid flow is established from the first internal distribution network through the lattice to the second internal distribution network; andwherein preferential streamlines are minimized.

A slurry filtering device is provided, including a shell body, having a receiving space, an outlet portion and an inlet portion, the outlet portion and the inlet portion respectively communicating with the receiving space, the inlet portion and the outlet portion defining a flow passage therebetween; a first filter, received in the receiving space and connected to the inlet portion, the first filter laterally arranged in the flow passage; a second filter, received in the receiving space and connected to the outlet portion, the second filter laterally arranged in the flow passage.

a filtering method, with which a fluid to be filtered is led through a filter (4), the filter (4) is back-flushed at regular time intervals and a pre-treatment agent is added to the fluid at the entry side of the filter. A process variable which describes the efficiency of the filtration is continuously computed during the filtration, and a metering quantity of the pre-treatment agent is reset on the basis of the values for the process variable or a characteristic values derived from this.

A reverse osmosis (RO) water filtration device includes a body, a RO cartridge, a first cartridge, a second cartridge and a storage tank all mounted inside the body. Water to be filtered sequentially goes through a water inlet of the RO water filtration device, the first cartridge, the RO cartridge, the storage tank, the second cartridge, and a faucet to get the water filtered. The storage tank provides additional water supply when the pressure between the faucet and RO cartridge is below the water pressure inside the storage tank to increase water volume upon opening a faucet.

A blood filtration device comprising a generally cylindrical housing having an interior wall. An interior member is mounted interior of the housing and comprises an outer surface having a porous membrane disposed thereon. The housing and interior member are relatively rotatable and define an annular gap therebetween. The blood filtration device also comprises an inlet for directing fluid into the annular gap, a first outlet for exiting filtrate passing through the membrane, and a second outlet for directing from the annular gap the remaining retentate. The porous membrane comprises a first layer and a second layer.

Provided is an integral 3D graphene-carbon hybrid foam composed of multiple pores and pore walls, wherein the pore walls contain single-layer or few-layer graphene sheets chemically bonded by a carbon material having a carbon material-to-graphene weight ratio from 1/100 to 1/2, wherein the few-layer graphene sheets have 2-10 layers of stacked graphene planes having an inter-plane spacing d002 from 0.3354 nm to 0.40 nm and the graphene sheets contain a pristine graphene material having essentially zero % of non-carbon elements, or a non-pristine graphene material having 0.01% to 25% by weight of non-carbon elements wherein said non-pristine graphene is selected from graphene oxide, reduced graphene oxide, graphene fluoride, graphene chloride, graphene bromide, graphene iodide, hydrogenated graphene, nitrogenated graphene, doped graphene, chemically functionalized graphene, or a combination thereof. Also provided are a process for producing the hybrid form, products containing the hybrid foam, and its applications.

A brine filtration device disposable at a bottom portion of a brine storage tank has inner and outer tubes having a plurality of fine slits in order to mechanically trap any large undissolved salt crystals that may be entrained within a sodium chloride solution. A plurality of beads are disposed between the inner and outer tubes to cause the sodium chloride solution to change direction (i.e., cause turbulence) which further promotes or facilitates dissolution of any undissolved salt crystals entrained within the sodium chloride solution. The sodium chloride solution continues to flow through the slits of the inner tube which further traps or catches any undissolved salt crystals. Additional changes in flow direction of the sodium chloride solution are also contemplated to further increase or facilitate dissolution of undissolved salt crystals entrained in the sodium chloride solution.

A pollution mitigation system is disclosed. The system can include a valve forming a passage the valve installable to form an orifice in a storm drain retention chamber that passes storm water into a conduit of a storm water management system. The valve having a stem connected to a closure member that can plug the orifice. The valve can have a spring loaded actuator that can move the closure member into a closed position. The system can also include a node such as a wireless sensor node or a mote that has sensors, a transceiver, an antenna, a microcontroller, memory, an energy source and at least one output to control movement of the closure member via the preloaded actuator. The node can have an output that provides the stimulus to the preloaded actuator to cause the preloaded actuator to move the closure member to a position that obstructs the passage in response to either the sensor or a transmission from a mobile telephone such as a cell phone or a smartphone.

A method for treating contaminated liquids in a flow by ozone, wherein the ozone is fed in gas form into the flow at one point and then is mixed into the flow in stages by mixers following one another in the flow direction, so that an absolute quantity of introduced ozone increases after each mixer until a feed efficiency of more than 95 percent is reached.

The Bay Area Vibez festival landed at the Port of Oakland this past weekend, bringing world-renowned reggae, electronic, and hip-hop artists to Middle Harbor Shoreline Park — a vast, open space that overlooks the San Francisco skyline. In its first year, the event arrived with a seemingly enormous budget and star-studded lineup that included living legends Stephen Marley, Damian Marley, and Nas.

But despite the festival’s grandiosity, the event ultimately felt like a way to capitalize on people’s nostalgia for bygone eras, prioritizing artists who haven’t released new material in years or are descendants of celebrated musicians.…

'Don’t build technology for Mordor.' On Saturday at Peter Thiel’s San Francisco home overlooking the Bay, protesters demonstrated against a collaboration between Immigration and Customs Enforcement and Palantir Technologies, a data-mining firm that Thiel co-founded. As reported in The Intercept, ICE will be using a new Palantir product called Investigative Case Management to to aid in its expanded deportation mission.…

Including a photo slideshow. Even at 10 a.m. this past Saturday morning, hours before a throng of anti-fascists and Trump-supporting white nationalists overtook downtown Berkeley’s streets, it was clear that most of the attendees were less interested in speeches, protesting, and free speech — and were mostly there just to tee-off on each other. Before the brawling began, officers stationed themselves at the entrances to downtown's "Peace Park."…

ACT for America, which the Southern Poverty Law Center has designated as an anti-muslim hate group, showed up on Saturday morning in cities nationwide, dubbing its protest a "March Against Sharia." Berkeley was spared, but the group appeared in nearby Santa Clara, and in Roseville, a suburb of Sacramento.…

The last time J Balvin was at Oracle arena was back on Feb. 15, 2015 when he was the opening act for Pitbull and Enrique Iglesias' joint tour. I was at that show with my mom as my date, and vividly remember her saying, “one day he’s going to headline his own tour here.” I brushed off her comment, it wasn’t that I didn’t believe that he was talented.…

Scroll from the bottom up to read in chronological order.…