In a world grappling with climate change, the push for sustainability has made electric vehicles (EVs) a popular choice. Some states are even phasing out gas engine vehicle sales by 2030/2035. However, considering the total impact of producing and operating EVs reveals a more complex picture.

The 1894 Horse Manure Crisis revealed the negative effects of rapid industrialization. Today, we can learn from past strategies to address the current climate crisis and promote a sustainable future.

The integration of 3D scanning and additive manufacturing has opened new possibilities in metrology. Analyzing the technical intricacies of 3D laser scanning hardware and software reveals their pivotal role in shaping engineering's future.

3D printing is a revolutionary technology that enables the creation of intricate and complex designs by adding material layer by layer. The final surface roughness of the printed part is critical to its overall performance and can have a major impact on its functionality.

Plant engineers and quality departments often struggle with zero point drift during air leak testing, where the initial zero reading shifts over time, leading to frequent adjustments of the leak test instrument. This article addresses the causes of zero drift, commonly attributed to changes in shop floor temperature, and provides strategies to minimize or eliminate this issue for improved efficiency in quality control processes.

Artificial intelligence brings a new dimension of precision and efficiency to automated inspection applications.

UTM is versatile and cost-effective, evaluating physical properties while adhering to industry standards. They test durability and establish load thresholds for functionality, safety during use, and minimum loads for usability, improving the quality of the final product.

I started my career in quality assurance and configuration management in 1963. On April 10th of the same year, the USS Thresher SSN 593 sank during its sea trials, leading to the tragic loss of 112 Naval Personnel and 17 civilians.

The standardization of screw threads has been a historical endeavor involving several organizations. However, the ASME B1 Screw Thread Committee has emerged as the primary organization responsible for holding, updating, and curating these standards.

This article introduces materials testing for metal powder and parts made using metal additive manufacturing. It covers types of testing and their objectives for characterizing printed metal, aimed at non-experts new to metal printing and testing.

VICTOR, NY—New Scale Robotics has been named an authorized systems integrator (ASI) for FANUC America Corp., enabling the company to more effectively use its Q-Span automated gauging technology in conjunction with FANUC’s collaborative robots.

For automation-focused companies, Autonomous Process Control (APC) isn’t just a tech advancement—it’s essential for achieving six sigma quality and boosting yields and profitability.

EVs could represent 45 to 58 percent of all vehicles by 2030, with the lithium-ion battery market expected to grow over 30 percent annually. The question is whether battery quality can keep up with this surge.

Time series analysis enables manufacturers to track quality data, revealing patterns, trends, and anomalies to maintain consistent production standards. This method can be applied to daily production output or hourly quality measurements.

Recently a discussion centered on organizational empowerment, its relationship to employee self-determination, and the impact on opportunity. The following is a summary of a recent conversation with one of our readers.

In March 2013, Lululemon, a billion-dollar Canadian athletic apparel company, made headlines after the media got wind of an unusual story. The Vancouver-based company recalled its popular black yoga pants after customers complained that the active wear was too sheer.

Green manufacturing doesn’t have to involve solar power and wind turbines. It can be turning equipment to a lower setting when not in use, switching the lighting, or even changing a plant’s operating hours in order to save electricity.

Though FaciliWorks CMMS is already used by hundreds of Mexican companies, there is still an enormous number of potential clients who are in need of a system like FaciliWorks.

The President announced new steps with the private sector to strengthen the manufacturing sector, boost advanced manufacturing, and attract the good paying jobs that a growing middle class requires.

The Association for Manufacturing Excellence (AME) is pleased to present its Innovation Summit in Irvine, CA, March 13-14. Leading industry innovators and longtime lean and innovation advocates will converge at the Irvine Marriot to share exclusive insider knowledge with attendees.

The initiative is designed to accelerate manufacturing nationwide.

Manufacturers of products ranging from military airplanes to lawnmowers all have something in common; each needs to be confident that their product can withstand the environmental conditions that their materials and components might be exposed to.

The solar cells that have a conversion efficiency of 21 percent.

Westinghouse and Holtec also support the bank's re-authorization.

Global capital project and infrastructure spending is expected to reach $9 trillion annually by 2025.

Since 2012, Dr. Fübi has served as CEO for RWE Technology.

Clean energy gets attention from around the world. In June, the United States, Brazil and China made new commitments to fight climate change.

Manufacturers add three to policy and government relations division, member and board relations adds one.

Company to reduce carbon footprint 25% by 2025, launch STEM scholarship program.

The single most important thing manufacturing leaders can do to engage their employees is to share the ‘why’ behind their daily work, says Kathleen Skarvan, CEO at New Prague, MN-based Electromed—Quality’s 2021 Plant of the Year.

For their dedication to quality, Larsen Manufacturing (Mundelein, IL) has earned our 2022 Quality Plant of the Year award.

We will explore the use of CMMs, advancements in technology, and their growing contribution to support leading developments in automation, artificial intelligence, and machine learning.

Gerresheimer, a manufacturer for the pharma and life science industry, will invest more than $88 million in expanding its manufacturing operations in Peachtree City, creating over 200 new jobs for Fayette County.

Traditional machine vision used rule-based programming for controlled environments but struggled in less controlled settings. Edge learning AI, operating directly on vision systems, enhances machine vision's power and usability, revolutionizing quality assurance and manufacturing processes.

The official document is titled ISO/IEC 17025: 2017, General requirements for the competence of testing and calibration laboratories. It is the international reference for laboratories performing calibration and testing activities.

In the medical device industry, reliability is critical. Manufacturers conduct extensive testing to ensure devices meet required standards, such as 95/95 or 95/99 confidence and reliability, assessed using Minitab Statistical Software.

Automating testing and inspection requires careful consideration of tools, including robot type, end-of-arm tooling, and ancillary systems. While cobots are popular for quality tasks, their full collaborative capabilities may not be utilized in some applications, leading to higher costs without maximizing benefits.

System integration strategies vary by industry and project scale. Success relies on thorough planning and execution, especially in machine vision technology. Here are key integration elements for success with vision technologies.

Reverse engineering is the process of taking apart a product to understand its design and functionality. This knowledge is helpful for creating similar products or improving existing designs.

Labor shortages continue to pressure manufacturers, with some dedicating up to 20% of their workforce to manual inspection. Embracing Quality 4.0 with automated in-line inspections and AI process analytics could provide significant value.

GigE Vision® sets the standard for high-performance industrial cameras, leveraging Gigabit Ethernet for fast, cost-effective image transfer. Introduced in 2006, it enables the transmission of digital images and video over Ethernet networks up to 100 meters. With version 3.0 on the horizon, GigE Vision remains the top choice for long-distance camera setups, offering unmatched performance and affordability.

Quality spoke with David Dechow of Machine Vision Source following his recent presentation at The Quality Show South about vision solutions for quality applications and integration that drives application success with current and emerging technologies.

In a world where AI vision technology is setting new quality control standards across industries, machines can now detect even the smallest defects in car parts and ensure that every packaged product meets health standards.

In the fast-paced and dynamic world of manufacturing, one trend is clear: short-wave infrared (SWIR) imaging and sensing is revolutionizing the industry.

Industry solutions and products rely on common standards and interfaces, enabling seamless collaboration and increasing efficiency.

Machine vision has evolved significantly over the past forty years, and the demand for specialized solutions has increased in recent years. This article will explore current and future imaging requirements.

The growing use of AI in manufacturing has revolutionized quality control. Traditional inspection methods struggle to keep pace with complex production processes, but AI augments accuracy and efficiency, upholding high-quality standards.

In battery cell production, maintaining high quality and reducing material waste is crucial. Digital image processing and machine vision solutions enable reliable defect detection, ensuring the production of safe, high-quality battery cells for electric mobility.

Selecting the correct LED lighting for machine vision can be challenging, even for experienced professionals. While red LEDs are commonly used, blue LEDs can be a superior choice for certain applications.

Machine vision projects often face challenges such as slow progress, difficulty in getting quotes, cost overruns, and unreliable operation. These issues require recognizing and adapting to the unique nature of machine vision projects compared to other types of projects.