In the first reported crystal structure involving the potential ligand N,N',N''-tris­(2-pyridin­yl)-1,3,5-benzene­tricarboxamide, inter­molecular N—H⋯O hydrogen bonds link the mol­ecules via their amide groups into slanted ladder-like chains. Only two of the three amide groups in the mol­ecule are involved in hydrogen bonding, which influences the degree of out-of-plane twisting at each amide group.

In the structure of the title salt, second-order Jahn–Teller distortion of the coordination octa­hedra around V ions is reflected by coexistence of short V—O bonds and trans-positioned long V—F bonds, with four equatorial V—F distances being inter­mediate in magnitude. Hydrogen bonding of the anions is restricted to F-atom acceptors only, with particularly strong N–H⋯F inter­actions [N⋯F = 2.5072 (15) Å] established by axial and cis-positioned equatorial F atoms.

The cationic cyclo­metallated iridium(III) complex [Ir(C9H7N2)2(C12H8N2)](PF6) has been synthesized and crystallized by the inter-diffusion method. It contains an unknown number of solvent mol­ecules and has a different space-group symmetry (C2/c) structure than its solvatomorph (P21/c).

The asymmetric unit of the title compound contains two independent mol­ecules, consisting of perimidine and phenol units, which are linked through an N—H⋯O hydrogen bond. Intra­molecular O—H⋯N hydrogen bonds are observed in both independent mol­ecules.

The title compound, 1-(2,5-di­meth­oxy­phen­yl)-2,2,6,6-tetra­methyl­piperidine, was synthesized as a side-product during the synthesis of the inter­mediate, methyl 3,6-dimeth­oxy-2-(2-meth­oxy-2-oxoeth­yl)benzoate, necessary for the total synthesis of the isocoumarin 5,8-dimeth­oxy-3-methyl-1H-isochromen-1-one.

The title compound exhibits exceptionally weak inter­molecular C—H⋯π hydrogen bonding of the ethynyl groups, with the corresponding H⋯π separations [2.91 (2) and 3.12 (2) Å] exceeding normal vdW distances. This bonding compliments distal contacts of the CH (aliphatic)⋯π type [H⋯π = 3.12 (2)–3.14 (2) Å] to sustain supra­molecular layers.

The dihedral angle between the two aromatic rings of the title compound is 64.12 (14)°. The crystal structure is stabilized by a short Cl⋯H contact, C—Cl⋯π and van der Waals inter­actions.

The title complex, Cu(L)2 or [Cu(C15HF10O2)2], comprising one copper ion and two fully fluorinated ligands (L−), was crystallized with 3,4-ethyl­ene­dioxy­thio­phene (EDOT, C6H6O2S) as a guest mol­ecule to give in a di­chloro­methane solution a unique co-crystal, Cu(L)2·3C6H6O2S.

The development of antiviral strategies requires a clear understanding of the principles that control the protein arrangements in viral shells. Considered here are those capsids that violate the paradigmatic Caspar and Klug (CK) model, and it is shown that the important structural features of such anomalous shells from the Picobirnaviridae, Flaviviridae and Leviviridae families can be revealed by models in the form of spherical icosahedral packings of equivalent rhombic structural units (SUs). These SUs are composed of protein dimers forming the investigated capsids which, as shown here, are based on the rhombic triacontahedron (RT) geometry. How to modify the original CK approach in order to make it compatible with the considered rhombic tessellations of a sphere is also discussed. Analogies between capsids self-assembled from dimers and trimers are demonstrated. This analysis reveals the principles controlling the localization of receptor proteins (which recognize the host cell) on the capsid surface.

The structural and nonlinear optical properties of a new anilinium hybrid crystal of chemical formula (C6H7NCl+·NO3−)3 have been investigated. The crystal structure was determined from single-crystal X-ray diffraction measurements performed at a temperature of 100 K which show that the compound crystallizes in a noncentrosymmetric space group (Pna21). The structural analysis was coupled with Hirshfeld surface analysis to evaluate the contribution of the different intermolecular interactions to the formation of supramolecular assemblies in the solid state that exhibit nonlinear optical features. This analysis reveals that the studied compound is characterized by a three-dimensional network of hydrogen bonds and the main contributions are provided by the O...H, C...H, H...H and Cl...H interactions, which alone represent ∼85% of the total contributions to the Hirshfeld surfaces. It is noteworthy that the halogen...H contributions are quite comparable with those of the H...H contacts. The nonlinear optical properties were investigated by nonlinear diffuse femtosecond-pulse reflectometry and the obtained results were compared with those of the reference material LiNbO3. The hybrid crystals exhibit notable second (SHG) and third (THG) harmonic generation which confirms its polarity is generated by the different intermolecular interactions. These measurements also highlight that the THG signal of the new anilinium compound normalized to its SHG counterpart is more pronounced than for LiNbO3.

The methods for X-ray crystal orientation are rapidly evolving towards versatility, fewer goniometry measurements, automation, high accuracy and precision. One method that attracts a lot of attention is energy-dispersive X-ray diffraction (EDXRD) which is based on detecting reflections from crystallographic planes in a crystal at fixed angles of a parallel polychromatic X-ray incident beam. In theory, an EDXRD peak can move in a diffraction pattern as a function of a crystallographic plane d-spacing and its orientation relative to a fixed direction in space can change also. This is equivalent to the possibility of measuring the orientation of single crystals. The article provides a modeling for the EDXRD method whose main feature is the nonmoving crystal in the sense of traditional goniometry where the angle measurements of diffracting planes are a must. The article defines the equation of orientation for the method and shows the derivation in great detail. It is shown that the exact solutions of the equations can be obtained using the generalized reduced gradient method, a mathematical subroutine that is implemented in Excel software. The significance and scientific impact of the work are discussed along with the validated tested results.

One of the essential components of molecular electronic circuits are switching elements that are stable in two different states and can ideally be switched on and off many times. Here, distinct buckminsterfullerenes within a self-assembled monolayer, forming a two-dimensional dodecagonal quasicrystal on a Pt-terminated Pt3Ti(111) surface, are identified to form well separated molecular rotational switching elements. Employing scanning tunneling microscopy, the molecular-orbital appearance of the fullerenes in the quasicrystalline monolayer is resolved. Thus, fullerenes adsorbed on the 36 vertex configuration are identified to exhibit a distinctly increased mobility. In addition, this finding is verified by differential conductance measurements. The rotation of these mobile fullerenes can be triggered frequently by applied voltage pulses, while keeping the neighboring molecules immobile. An extensive analysis reveals that crystallographic and energetic constraints at the molecule/metal interface induce an inequality of the local potentials for the 36 and 32.4.3.4 vertex sites and this accounts for the switching ability of fullerenes on the 36 vertex sites. Consequently, a local area of the 8/3 approximant in the two-dimensional fullerene quasicrystal consists of single rotational switching fullerenes embedded in a matrix of inert molecules. Furthermore, it is deduced that optimization of the intermolecular interactions between neighboring fullerenes hinders the realization of translational periodicity in the fullerene monolayer on the Pt-terminated Pt3Ti(111) surface.

To date X-ray protein crystallography is the most successful technique available for the determination of high-resolution 3D structures of biological molecules and their complexes. In X-ray protein crystallography the structure of a protein is refined against the set of observed Bragg reflections from a protein crystal. The resolution of the refined protein structure is limited by the highest angle at which Bragg reflections can be observed. In addition, the Bragg reflections alone are typically insufficient (by a factor of two) to determine the structure ab initio, and so prior information is required. Crystals formed from an imperfect packing of the protein molecules may also exhibit continuous diffraction between and beyond these Bragg reflections. When this is due to random displacements of the molecules from each crystal lattice site, the continuous diffraction provides the necessary information to determine the protein structure without prior knowledge, to a resolution that is not limited by the angular extent of the observed Bragg reflections but instead by that of the diffraction as a whole. This article presents an iterative projection algorithm that simultaneously uses the continuous diffraction as well as the Bragg reflections for the determination of protein structures. The viability of this method is demonstrated on simulated crystal diffraction.

This work considers the scaling properties characterizing the hyperuniformity (or anti-hyperuniformity) of long-wavelength fluctuations in a broad class of one-dimensional substitution tilings. A simple argument is presented which predicts the exponent α governing the scaling of Fourier intensities at small wavenumbers, tilings with α > 0 being hyperuniform, and numerical computations confirm that the predictions are accurate for quasiperiodic tilings, tilings with singular continuous spectra and limit-periodic tilings. Quasiperiodic or singular continuous cases can be constructed with α arbitrarily close to any given value between −1 and 3. Limit-periodic tilings can be constructed with α between −1 and 1 or with Fourier intensities that approach zero faster than any power law.

In a Model block, if the instance-specific value of a model argument has an anonymous structure type, an update diagram reports an error when there are multiple bus types that match that anonymous structure type.This bug exists in the following release(s):
R2020a

This bug has a workaround

Interested in Upgrading?

When creating a System Composer architecture model, if the following functions are called with an invalid or missing stereotype, it can cause the model to get corrupted and might lead to a MATLAB crash:

• addComponent
• addPort
• connect

Simulink might produce an incorrect sorted order for a model that meets all of the following conditions:

• The model contains blocks from the SoC Blockset
• The Signal logging option is selected in the model configuration set
• Signals using asynchronous sample time are configured for logging

If you try to open a text file with UTF-16 or UTF-32 encoding, the Import Tool displays a warning message stating that the encoding is not supported.  If you continue to load the file anyways, it is opened with UTF-8 encoding, and the file may not be displayed or imported as expected.This bug exists in the following release(s):
R2020a

This bug has a workaround

Interested in Upgrading?

When the Signal Editor is saving data, the indicator that the save is occurring does not appear.  You might notice a delay when saving large data files.This bug exists in the following release(s):
R2020a

Interested in Upgrading?

In certain scenarios, a Subsystem Reference block changes its position. It can happen during: 

1. Loading of top model which contains the Subsystem Reference block 
2. Synchronization of Subsystem Reference block's contents
3. Converting a subsystem to Subsystem Reference block 

This free report highlights the main facts, numbers and trends of the Russian ecommerce and e-payments markets in an international perspective.

The Open Banking Report 2019 clarifies the role of key key-players in a post-September 14th world and assesses how the landscape has shifted within Europe and beyond.

The GDC Compliance Advisory Board (CAB) provides insight into how to interpret the Strong Consumer Authentication (SCA) mandate described in PSD 2 without jeopardizing data privacy concerns protected by GDPR. 

In the title compound, C16H14Cl2FN3, the dihedral angle between the two aromatic rings is 64.12 (14)°. The crystal structure is stabilized by a short Cl...H contact, C—Cl...π and van der Waals interactions. The Hirshfeld surface analysis and two-dimensional fingerprint plots show that H...H (33.3%), Cl...H/H...Cl (22.9%) and C...H/H...C (15.5%) interactions are the most important contributors towards the crystal packing.

The title compound, C14H16, exhibits exceptionally weak intermolecular C—H...π hydrogen bonding of the ethynyl groups, with the corresponding H...π separations [2.91 (2) and 3.12 (2) Å] exceeding normal vdW distances. This bonding complements distal contacts of the CH (aliphatic)...π type [H...π = 3.12 (2)–3.14 (2) Å] to sustain supramolecular layers. Hirshfeld surface analysis of the title compound suggests a relatively limited significance of the C...H/H...C contacts to the crystal packing (24.6%) and a major contribution from H...H contacts accounting 74.9% to the entire surface.

The cationic complex in the title compound, [Ir(C9H7N2)2(C12H8N2)]PF6, comprises two phenylpyrazole (ppz) cyclometallating ligands and one 1,10-phenanthroline (phen) ancillary ligand. The asymmetric unit consists of one [Ir(ppz)2(phen)]+ cation and one [PF6]− counter-ion. The central IrIII ion is six-coordinated by two N atoms and two C atoms from the two ppz ligands as well as by two N atoms from the phen ligand within a distorted octahedral C2N4 coordination set. In the crystal structure, the [Ir(ppz)2(phen)]+ cations and PF6− counter-ions are connected with each other through weak intermolecular C—H...F hydrogen bonds. Additional C—H...π interactions between the rings of neighbouring cations consolidate the three-dimensional network. Electron density associated with additional disordered solvent molecules inside cavities of the structure was removed with the SQUEEZE procedure in PLATON [Spek (2015). Acta Cryst. C71, 9–18]. The given chemical formula and other crystal data do not take into account the unknown solvent molecule(s). The title compound has a different space-group symmetry (C2/c) from its solvatomorph (P21/c) comprising 1.5CH2Cl2 solvent molecules per ion pair.

The asymmetric unit of the title compound, C17H14N2O, contains two independent molecules each consisting of perimidine and phenol units. The tricyclic perimidine units contain naphthalene ring systems and non-planar C4N2 rings adopting envelope conformations with the C atoms of the NCN groups hinged by 44.11 (7) and 48.50 (6)° with respect to the best planes of the other five atoms. Intramolecular O—H...N hydrogen bonds may help to consolidate the molecular conformations. The two independent molecules are linked through an N—H...O hydrogen bond. The Hirshfeld surface analysis of the crystal structure indicates that the most important contributions for the crystal packing are from H...H (52.9%) and H...C/C...H (39.5%) interactions. Hydrogen bonding and van der Waals interactions are the dominant interactions in the crystal packing. Density functional theory (DFT) optimized structures at the B3LYP/ 6–311 G(d,p) level are compared with the experimentally determined molecular structure in the solid state. The HOMO–LUMO behaviour was elucidated to determine the energy gap.

In the title compound, C17H27NO2, the piperidine ring has a chair conformation and is positioned normal to the benzene ring. In the crystal, molecules are linked by C—H...O hydrogen bonds, forming chains propagating along the c-axis direction.

In the structure of the title salt, (C7H12N6)[VOF5], second-order Jahn–Teller distortion of the coordination octahedra around V ions is reflected by coexistence of short V—O bonds [1.5767 (12) Å] and trans-positioned long V—F bonds [2.0981 (9) Å], with four equatorial V—F distances being intermediate in magnitude [1.7977 (9)–1.8913 (9) Å]. Hydrogen bonding of the anions is restricted to F-atom acceptors only, with particularly strong N–H...F interactions [N...F = 2.5072 (15) Å] established by axial and cis-positioned equatorial F atoms. Hirshfeld surface analysis indicates that the most important interactions are overwhelmingly H...F/F...H, accounting for 74.4 and 36.8% of the contacts for the individual anions and cations, respectively. Weak CH...F and CH...N bonds are essential for generation of three-dimensional structure.

In the first reported crystal structure involving the potential ligand N,N',N''-tris(pyridin-2-yl)benzene-1,3,5-tricarboxamide, C24H18N6O3, intermolecular N—H...O hydrogen bonds link the molecules via their amide groups into slanted ladder-like chains, in which the uprights of the ladder are formed by the hydrogen-bonding interactions and the benzene ring cores of the molecules act as the rungs of the ladder. Only two of the three amide groups in the molecule are involved in hydrogen bonding and this influences the degree of out-of-plane twisting at each amide group, with the twist being more significant for those amide groups participating in hydrogen bonds.

An intuitive method is presented for detecting pseudosymmetries in Z' > 1 cases as a complement to well-proven strategies already available in the literature. It is based in the simple idea that the mid-points between equivalent atoms in symmetrically related mol­ecules are disposed according to simple well-known patterns, which are easily recognizable by optical inspection. A number of Z' = 4 cases in the literature are analyzed, which allows some of the potentialities of the method to be revealed.

Experimental electron-density studies based on high-resolution diffraction experiments allow halogen bonds between heavy halogens to be classified. The topological properties of the electron density in Cl⋯Cl contacts vary smoothly as a function of the inter­action distance. The situation is less straightforward for halogen bonds between iodine and small electronegative nucleophiles, such as nitro­gen or oxygen, where the electron density in the bond critical point does not simply increase for shorter distances. The number of successful charge–density studies involving iodine is small, but at least individual examples for three cases have been observed. (a) Very short halogen bonds between electron-rich nucleophiles and heavy halogen atoms resemble three-centre–four-electron bonds, with a rather symmetric heavy halogen and without an appreciable σ hole. (b) For a narrow inter­mediate range of halogen bonds, the asymmetric electronic situation for the heavy halogen with a pronounced σ hole leads to rather low electron density in the (3,−1) critical point of the halogen bond; the properties of this bond critical point cannot fully describe the nature of the associated inter­action. (c) For longer and presumably weaker contacts, the electron density in the halogen bond critical point is only to a minor extent reduced by the presence of the σ hole and hence may be higher than in the aforementioned case. In addition to the electron density and its derived properties, the halogen–carbon bond distance opposite to the σ hole and the Raman frequency for the associated vibration emerge as alternative criteria to gauge the halogen-bond strength. We find exceptionally long C—I distances for tetra­fluoro­diiodo­benzene molecules in cocrystals with short halogen bonds and a significant red shift for their Raman vibrations.

The title com­pound, tetra­ethyl­ammonium tetra­thio­rhenate, [(C2H5)4N][ReS4], has, at room temperature, a disordered structure in the space group P63mc (Z = 2, α-phase). A phase transition to the monoclinic space group P21 (Z = 2, γ-phase) at 285 K leads to a pseudo-merohedral twin. The high deviation from the hexa­gonal metric causes split reflections. However, the different orientations could not be separated, but were integrated using a large integration box. Rapid cooling to 110–170 K produces a metastable β-phase (P63, Z = 18) in addition to the γ-phase. All crystals of the β-phase are contaminated with the γ-phase. Additionally, the crystals of the β-phase are merohedrally twinned. In contrast to the α-phase, the β- and γ-phases do not show disorder.

During investigations of the formation of hydrated magnesium carbonates, a sample of the previously unknown magnesium carbonate hexa­hydrate (MgCO3·6H2O) was synthesized in an aqueous solution at 273.15 K. The crystal structure consists of edge-linked isolated pairs of Mg(CO3)(H2O)4 octa­hedra and noncoordinating water mol­ecules, and exhibits similarities to NiCO3·5.5H2O (hellyerite). The recorded X-ray diffraction pattern and the Raman spectra confirmed the formation of a new phase and its transformation to magnesium carbonate trihydrate (MgCO3·3H2O) at room temperature.

An efficient synthesis of 1-aryl­isochromeno[3,4-d][1,2,3]triazol-5(1H)-ones, involving the diazo­tization of 3-amino-4-aryl­amino-1H-isochromen-1-ones in weakly acidic solution, has been developed and the spectroscopic characterization and crystal structures of four examples are reported. The mol­ecules of 1-phenyl­isochromeno[3,4-d][1,2,3]triazol-5(1H)-one, C15H9N3O2, (I), are linked into sheets by a combination of C—H⋯N and C—H⋯O hydrogen bonds, while the structures of 1-(2-methyl­phen­yl)isochromeno[3,4-d][1,2,3]triazol-5(1H)-one, C16H11N3O2, (II), and 1-(3-chloro­phen­yl)isochromeno[3,4-d][1,2,3]triazol-5(1H)-one, C15H8ClN3O2, (III), each contain just one hydrogen bond which links the mol­ecules into simple chains, which are further linked into sheets by π-stacking inter­actions in (II) but not in (III). In the structure of 1-(4-chloro­phen­yl)isochromeno[3,4-d][1,2,3]triazol-5(1H)-one, (IV), isomeric with (III), a combination of C—H⋯O and C—H⋯π(arene) hydrogen bonds links the mol­ecules into sheets. When com­pound (II) was exposed to a strong acid in methanol, qu­anti­tative conversion occurred to give the ring-opened transesterification product methyl 2-[4-hy­droxy-1-(2-methyl­phen­yl)-1H-1,2,3-triazol-5-yl]benzoate, C17H15N3O3, (V), where the mol­ecules are linked by paired O—H⋯O hydrogen bonds to form centrosymmetric dimers.

An operationally simple and time-efficient approach has been developed for the synthesis of racemic N-substituted 3-(2-aryl-2-oxoeth­yl)-3-hy­droxy­indolin-2-ones by a piperidine-catalysed aldol reaction between aryl methyl ketones and N-alkyl­isatins. These aldol products were used successfully as strategic inter­mediates for the preparation of N-substituted (E)-3-(2-hetaryl-2-oxo­ethyl­idene)indolin-2-ones by a stereoselective dehydration reaction under acidic conditions. The products have all been fully characterized by 1H and 13C NMR spectroscopy, by mass spectrometry and, for a representative selection, by crystal structure analysis. In each of (RS)-1-benzyl-3-hy­droxy-3-[2-(4-meth­oxy­phen­yl)-2-oxoeth­yl]indolin-2-one, C24H21NO4, (Ic), and (RS)-1-benzyl-3-{2-[4-(di­methyl­amino)­phen­yl]-2-oxoeth­yl}-3-hy­droxy­indolin-2-one, C25H24N2O3, (Id), inversion-related pairs of mol­ecules are linked by O—H⋯O hydrogen bonds to form R22(10) rings, which are further linked into chains of rings by a combination of C—H⋯O and C—H⋯π(arene) hydrogen bonds in (Ic) and by C—H⋯π(arene) hydrogen bonds in (Id). The mol­ecules of (RS)-1-benzyl-3-hy­droxy-3-[2-oxo-2-(pyridin-4-yl)eth­yl]indolin-2-one, C22H18N2O3, (Ie), are linked into a three-dimensional framework structure by a combination of O—H⋯N, C—H⋯O and C—H⋯π(arene) hydrogen bonds. (RS)-3-[2-(Benzo[d][1,3]dioxol-5-yl)-2-oxoeth­yl]-1-benzyl-3-hy­droxy­indolin-2-one, C24H19NO5, (If), crystallizes with Z' = 2 in the space group Poverline{1} and the mol­ecules are linked into com­plex sheets by a combination of O—H⋯O, C—H⋯O and C—H⋯π(arene) hydro­gen bonds. In each of (E)-1-benzyl-3-[2-(4-fluoro­phen­yl)-2-oxo­ethyl­idene]indolin-2-one, C23H16FNO2, (IIa), and (E)-1-benzyl-3-[2-oxo-2-(thiophen-2-yl)ethylidene]indolin-2-one, C21H15NO2S, (IIg), the mol­ecules are linked into simple chains by a single C—H⋯O hydrogen bond, while those of (E)-1-benzyl-3-[2-oxo-2-(pyridin-4-yl)ethyl­idene]indolin-2-one, C22H16N2O2, (IIe), are linked by three C—H⋯O hydrogen bonds to form sheets which are further linked into a three-dimensional structure by C—H⋯π(arene) hydrogen bonds. There are no hydrogen bonds in the structures of either (E)-1-benzyl-3-[2-(4-meth­oxy­phen­yl)-2-oxo­ethyl­idene]indolin-2-one, C24H19NO3, (IIc), or (E)-1-benzyl-5-chloro-3-[2-(4-chloro­phen­yl)-2-oxo­ethyl­idene]indolin-2-one, C23H15Cl2NO2, (IIh), but the mol­ecules of (IIh) are linked into chains of π-stacked dimers by a combination of C—Cl⋯π(arene) and aromatic π–π stacking inter­actions.

The com­pound poly[2-hy­droxy-N-methyl­ethan-1-aminium [μ3-cyanido-κ3C:C:N-di-μ-cyanido-κ4C:N-dicuprate(I)]], {(C3H10NO)[Cu2(CN)3]}n or [meoenH]Cu2(CN)3, crystallizes in the tetra­gonal space group P43. The structure consists of a three-dimensional (3D) anionic CuICN network with noncoordinated protonated N-methyl­ethano­lamine cations providing charge neutrality. Pairs of cuprophilic Cu atoms are bridged by the C atoms of μ3-cyanide ligands, which link these units into a 43 spiral along the c axis. The spirals are linked together into a 3D anionic network by the two other cyanide groups. The cationic moieties are linked into their own 43 spiral via N—H⋯O and O—H⋯O hydrogen bonds, and the cations inter­act with the 3D network via an unusual pair of N—H⋯N hydrogen bonds to one of the μ2-cyanide groups. Thermogravimetric analysis indicates an initial loss of the base cation and one cyanide as HCN at temperatures in the range 130–250 °C to form CuCN. We show how loss of a specific cyanide group from the 3D CuCN structure could form the linear CuCN structure. Further heating leaves a residue of elemental copper, isolated as the oxide.