A variable refrigerant package air conditioner is shown that is easy to install in new construction with a unique base that causes collected mixture that overflows to drain outside the building. A control system is shown that has motors and compressor that are pulse width modulated so the air conditioner is infinitely variable while maintaining the highest possible power factor. Dehumidification of outside air occurs as it is mixed with inside air. By gradually approaching a temperature set point and even reheating after dehumidification, moisture is removed from the room.

A novel process for activating available compressors in multiple compressor air conditioning systems, using an Optimum Stage-Up Process. This process is programmed into a controller as an algorithm, to provide a process for fast compressor start. This process shortens the time to initiate operation of compressors in a multi-compressor air conditioning system required to meet the demand call under any load condition, and hence shortens the time required for the actual sensed interior region air temperature to reach the interior region temperature set point. The Optimum Stage-up Algorithm estimates the number of compressor stages or steps that must be initiated, based on sensed or measured values, to meet the demand at any load condition. These measured values include the sensed temperature of the interior region being cooled, which is compared to the temperature set point of this interior region as well as measured mixed air temperature and supply air temperature.

An ice making machine having a refrigeration system designed for hydrocarbon (HC) refrigerants, and particularly propane (R-290), that includes dual independent refrigeration systems and a unique evaporator assembly comprising of a single freeze plate attached to two cooling circuits. The serpentines are designed in an advantageous pattern that promotes efficiency by ensuring the even bridging of ice during freezing and minimizing unwanted melting during harvest by providing an even distribution of the heat load. The charge limitations imposed with flammable refrigerants would otherwise prevent large capacity ice maker from being properly charged with a single circuit. The ice making machine includes a single water circuit and control system to ensure the proper and efficient production of ice. Material cost is conserved as compared to a traditional dual system icemaker.

An ice machine may include a compressor, a first heat exchanger, an expansion device, an evaporator, an ice tray, and a water pump. The first heat exchanger may receive compressed working fluid from the compressor. The expansion device may receive working fluid from the first heat exchanger. The evaporator may receive working fluid from the expansion device. The ice tray may be in a heat transfer relationship with the evaporator. The ice tray may include a plurality of ice molds. The water pump may be in fluid communication with the ice molds and may be configured to pump water from a water source to the ice molds.

Systems and methods for recovering light hydrocarbons from refinery waste gas using a back-end turboexpander to generate a higher recovery of the light hydrocarbons for use as petrochemical feedstock and to remove the liquid light hydrocarbons before entering the turboexpander.

A process is described herein for removing high freeze point hydrocarbons, including benzene compounds, from a mixed feed gas stream. The process involves cooling process streams in one or more heat exchangers and separating condensed compounds in multiple separators to form a methane-rich product gas stream. Select solvent streams from a fractionation train and/or separate solvent streams are employed to lower the freeze point of one or more streams that contain high freeze point hydrocarbons. A corresponding system also is disclosed.

An assembly comprising a duct (1) for passing a flow of cryogenic fluid, and a valve (2); the assembly being characterized in that the duct (1) includes an interface for inserting the valve, the interface forming an internal abutment (51) and an external abutment (52);the valve (2) being configured in such a manner as to be inserted into said insertion interface by sliding, the valve (2) comprising a valve body (3) presenting a first end (31) and a second end (32), the valve body (3) being adapted to be bolted in said insertion interface in such a manner that the first end (31) and the second end (32) come into abutment respectively against the internal abutment (51) and against the external abutment (52), the assembly including an internal sealing element (61) arranged between the internal abutment (51) and the first end (31), and an external sealing element (62) arranged between the external abutment (52) and the second end (32).

A system for adaptive cooling and energy harvesting comprising at least one thermoelectric device capable of acting as a thermoelectric cooler and as a thermoelectric generator, a hierarchical multiple-level control system, and electronics controlled by the control system and connected to the thermoelectric device. The electronics selectively configure the thermoelectric device in at least in a thermoelectric cooler operating mode and in a thermoelectric generation operating mode. The thermoelectric device can incorporate quantum-process and quantum-well materials for higher heat transfer and thermoelectric generation efficiencies. The invention provides for thermoelectric devices to additionally operate in temperature sensing mode. The hierarchical control system can comprise a plurality of control system, each of which can operate in isolation and can be interconnected with additional subsystems associated with other hierarchical levels. The hierarchical control system can comprise linear (additive) control, bilinear (additive and multiplicative) control, nonlinear control, and hysteresis.

LIKE many drivers in Southampton, I will be delighted when the long-running roadworks near the Red Funnel ferry terminal at Town Quay finally comes to an end.

The BBC has defended its policy of using the term Islamic State when referring to the blood-soaked terrorists that claimed the lives of 30 Britons in Tunisia and tens of thousands of people in the Middle East.

It is interesting that the Greek Prime Minister, Alexis Tsipras, summons the very real fact his nation invented democracy to bolster his government’s argument for a favourable solution to the debt crisis wracking its citizens.

Set in 225 wooded acres in the rolling Hampshire countryside just north of Fareham, Meon Valley offers 2 beautifully designed banqueting rooms for both Civil Wedding Ceremonies and Wedding Breakfasts.

News you don't want to miss for April 8:

1. Schools in Alameda County, and five other Bay Area counties, will not re-open this academic year, the San Francisco Chronicle reports.…

News you don't want to miss for April 13:

1. "If the country’s most popular coronavirus model proves accurate, California will reach the peak of its outbreak this Wednesday," the San Francisco Chronicle reports, when it will reach a predicted 66 deaths.…

News you don't want to miss for April 17-19:

1. "The good news: California has an $18 billion rainy day fund, the biggest in its history.…

News you don't want to miss for April 24:

1. San Francisco Mayor London Breed provided a hint on Friday that the city's shelter in place order will be extended past May 4, possibly weeks or a month, KPIX reports.…

News you don't want to miss for April 27:

1. Alameda County, along with five other Bay Area counties, announced the shelter in place order will be extended through the end of May, the San Francisco Chronicle reports.…

News you don't want to miss for April 28:

1. The upcoming school year could open early, maybe in July, Gov. Gavin Newsom said on Tuesday, the East Bay Times reports.…

The LA Times drops into Richmond and gets it all wrong. Richmond, the second largest city in Contra Costa County, has had remarkable success fighting the coronavirus — so much so that it and the county are national models. Officials acted quickly and decisively to mobilize resources, info, and healthcare services while providing economic protections for renters and homeowners.…

Coronavirus Journal: Virus hitting unincorporated areas in Alameda County hard. The forecast for Alameda County's short-term fiscal health will come into focus this week and it could be sobering news for those who depend greatly on the county's safety net services. County supervisors will learn at a budget workshop session on Thursday the extent of the damage caused by COVID-19 on the local economy.…

News you don't want to miss for April 29:

1. Alameda County and five other Bay Area counties issued a revised shelter in place order on Wednesday that will allow for some outdoor activities to resume, such as, construction work, landscaping, gardening, golf and tennis, SFGate reports.…

News you don't want to miss for April 30:

1. The five fired Oakland police officers involved in the shooting of Joshua Pawlik in 2018 were reinstated after it was found the Oakland Police Commission violated the Brown Act, the state law for transparency in public meetings, KPIX reports.…

Coronavirus Journal: restrictions are easing across the region and state Bay Area health officials have eased some restrictions in the latest shelter-in-place order that's at curbing the coronavirus outbreak.…

East Bay governments plan for revenue declines and budget cuts while bemoaning lack of federal assistance The massive $2.2 trillion Coronavirus Aid, Relief, and Economic Security Act set aside $339.8 billion in federal aid for state and local governments affected by the novel coronavirus pandemic.…

News you don't want to miss for May 7:

Just a few months ago, California was sitting on an overflowing reserve fund. After covid-19, the state is now reconciling with a massive $54.3 billion deficit over the next fiscal year, Calmatters reports.…

A method includes embedding clothing with at least one sensor and at least one control unit; a power unit powering on the at least one sensor and the at least one control unit; the at least one sensor monitoring a sensed condition; the at least one control unit conducting a heat prediction based on the sensed condition; and the at least one control unit controlling threads within the clothing based on the heat prediction to actively adjust properties of the clothing.

This disclosure relates to a garment having zippers for separating the garment into two halves. The garment has a zipper on the front and a zipper on the back. The halves can be mixed and matched according to preference for color, surface ornamentation, or material. Each half has an inside pocket that can be used for storing an additional garment half. The garment may optionally include a hood. In embodiments where the garment has a hood, the back zipper may unzip as the slider is moved in the downward direction, thereby allowing the user to separate the hood and fold the hood into a collar.

A system and method for identifying areas of a processing plant in which a glove is damaged. The system includes utilizing color-coded sets of gloves in different areas or processing steps within the plant. All the gloves used in a particular plant are provided with a unique identifier. If a piece of a glove is located in the product within the plant, the color of that piece indicates the area or process of the plant in which the glove was used. If a piece of a damaged glove is located in the product at a remote destination, the unique identifier in that piece is matched with a registry to determine the plant in which the glove was used. The color of the piece then helps the plant to identify where the damaged glove was used. The system and method are particularly helpful in the food processing industry, especially meat processing.

A preferred embodiment of the present invention contemplates a baseball cap-type hat having a head covering portion as well as a forward facing bill. A sweat or liquid absorbing element preferably a terry cloth towel is removably attached to the bill or permanently affixed using hook and pile fastening means. In a preferred embodiment, the hook and pile fastening means half attached to the bill includes an opening to provide a storage compartment in which a key, coin, or other small object may be stored. If desired, the towel may be permanently stitched to the underside of the bill of the cap. In a further alternative, the towel may be made of a hyper-evaporative material.

The disclosed herein is a personal rain protection device that serves as an umbrella combined and connected with a vest. The umbrella and vest combination can function in all types of rainstorms. The vest aspect is located at the torso of a wearer and extends from the users shoulders. The vest element also includes relatively light weights at the tail end of the vest to protect against succumbing to powerful wind gusts. The present invention, including the umbrella, is not handheld, but rather it is worn along with the vest to which the umbrella is attached to.

Clothing articles (e.g., aquatic “board” shorts) are generally comprised of at least one unitary woven fabric panel having multiple seamlessly adjacent different fabric weave sections. These seamlessly adjacent different fabric weave sections may be selected from plain fabric weaves, twill fabric weaves and/or Dobby fabric weaves. Aquatic activity shorts are provided which include a one piece rear fabric panel providing a seamless back rise.

Articles of apparel include: (a) a garment structure having one or more fabric elements structured and arranged to provide a close fit to at least one predetermined portion of a body (e.g., area(s) of the body for which enhanced position sensing and/or feedback are desired, such as the lower back, the arch of the foot, etc.); and (b) a body position feedback system engaged with or integrally formed as part of the garment structure. The body position feedback system may apply higher tensile or constricting forces to selected portions of the wearer's body, which can help stimulate or interact with nerves and deep tissue receptors located in various portions of the body. The increased forces at selected locations of the body give the wearer sensory feedback regarding the position or orientation of these parts of the body and can improve or accelerate development of “muscle memory.”

The present invention provides color-coded accessories such as wristbands, bibs, and other patient wearables, color-coded pillows and pillow cases, and a universal chart wherein the color code is associated with a specific medical diagnosis. These accessories alert healthcare providers to the medical diagnosis of the patient and enhance patient safety by reducing medical errors during administration of treatments and medicines to the patients. These accessories also provide protection to healthcare providers assisting them to identify diagnostic categories and alerting them to take proper precautions with patients, for example those with infectious diseases, thereby decreasing or preventing transmission of infectious diseases.

A protective sports accessory for protecting a hand of a user when striking includes a wrist wrap configured for strapping around a wrist of the user. A finger grip is configured for gripping with fingers when the hand is formed into a fist. A tensioning member interconnects the wrist wrap and the finger grip, the wrist wrap, the finger grip and the tensioning member being configured for setting up tension in the tensioning member when the hand is formed into the fist.

A polymeric housing may have a channel defined therein. A first conductive trace may at least partially coincide with the channel. A first wire may have a first conductor surrounded by a first insulating jacket. The first conductor may be in electrical communication with the first conductive trace. A jacket bonding region of the first jacket may be welded to a housing bonding region of the housing. The jacket bonding region and the housing bonding region may be formed from a common type of polymer.

A shoe having a bio foot pad, including a plurality of circumferential elastic fibers surrounded by a viscoelastic material; wherein said fibers impart a biphasic characteristic to said viscoelastic material; and wherein said fibers under compression develop a plurality of hoop stresses to facilitate load conversion and distribution of axial forces exerted against a heel area of a user.

A traction cleat applicable for use in field sports is provided with dynamic traction elements having larger radial thickness, cross-sectional area and mass than dynamic elements in golf shoe cleats. The strength of a locking arrangement for the cleat in a shoe-mounted receptacle is enhanced by providing an annular array of spaced locking stubs on the receptacle to engage a similar array of spaced locking posts on the cleat.

An article of footwear includes projection members providing sensory feedback. The projection members are movable relative to an upper of the article of footwear. When the upper encounters a surface of an object, the projection members may be displaced in a direction towards wearer's foot. The projection members may be configured so that they are inserted into apertures located on the upper, and extend above an outer surface of the upper.

A footwear effects toning of the leg muscles. It includes two soles and a redress mechanism contained within each of the soles for redressing the positions of the soles, in order to adjust corresponding feet positions by toning the leg muscles. A shock absorbing pebble for use within the soles, includes an elastic membrane that deforms under pressure, and that defines two chambers that are connected by means of a gas permeable membrane. In a balanced position, the first chamber is filled with a mixture of gas along with fluid, and the second chamber is filled with gas. As an external force is applied to the membrane, gas molecules are forced into the second chamber, inflating it until equilibrium is achieved, thus dampening the external force.

A shoe, and method of manufacture, comprised of (i) a shoe upper having an arrangement of holes in the bottom surface, (ii) an outer sole having an arrangement of holes corresponding to the arrangement of holes in the bottom surface of the shoe upper, and (iii) an inner sole disposed within the shoe upper, the inner sole having a plurality of pegs that extend from its bottom surface that are arranged in alignment with the arrangement of holes in the shoe upper and outer sole when the inner sole is disposed within the shoe upper, each peg extending downwardly through its associated hole in the shoe upper and the outer sole, so that, in the preferred embodiment, the bottom surface of each peg is exposed to, and forms part of, bottom surface of the shoe.

A SOUTHAMPTON home has been pelted with bricks in a series of targeted attacks.

POLICE have arrested a man for assaulting officers after he was told he was breaching the new coronavirus laws.

Every bride wants to look spectacular on her wedding day, so here trainer Janette Cardy shares her top 10 tips for getting in shape and looking radiant.

IT’S the “life-saving” organisation that is slowly emerging from the shadows.

IT IS an ambitious fundraising target but one that dedicated fundraisers are confident of reaching in a bid to make a state-of-the art children’s emergency department in Hampshire a reality.

A ?SOUTHAMPTON man has ?received? ?one? ?of? ?the? ?most? ?prestigious? ?awards? ?in ?sailing in recognition of a life spent inspiring thousands of people to take up the past time.

IT may be small in size but for what The Eclipse Inn lacks in square feet it makes up for with an abundance of character and charm.

A QUIRKY pub in Winchester has 'the widest diversity of customers you can find in the city' according to its landlady.

EASTLEIGH are through to the FA Cup first round after two penalties for Scott Rendell.

All the photos from Saints' 1-0 victory against Crystal Palace, as Sadio Mane's late goal decides the match.