Stone is a leading engineering scholar and pioneer in fluid dynamics research. University Professor is Princeton’s highest honor for faculty.

A commitment to the liberal arts is at the core of Princeton University's mission. A new cohort of outstanding postdocs has joined the Society of Fellows for three years of teaching and research.

In the Class of 2028, 71.5% of students qualify for financial aid and 21.7% of the class are lower-income students eligible for federal Pell grants.

Princeton engineers and industry leaders have squelched a threat that had lurked for years in the internet’s encryption system.

The award supports independent research in the arts and humanities at the American Academy in Rome. Both Princeton recipients are undergraduate alumni.

Princeton University will present the honors at Alumni Day, scheduled for Feb. 22, 2025.

Jordan will also receive the American Historical Society's Award for Scholarly Distinction in January.

See the Shaggy Parasol mushrooms? They were not there two or three days ago. Yet Lammas comes and they burst forth, full of fungal goodness. Here just north of the Colorado-New Mexico line, August is the heart of mushroom season. … Continue reading →

The New York Post had two articles recently on apparent animal sacrifice in the Jamaica Bay area of Long Island (politically in both Brooklyn and Queens). “Animal Sacrifices on the Rise in Queens with Chickens, Pigs being Tortured in ‘Twisted’ … Continue reading →

As followers may recall, I started hand stitching hexies for a Grandmother's Flower Garden quilt in March, 2012... three years ago. Watching my friend, Christy, basting sweet, reproduction fabrics around paper forms, making little stacks of 3/4-inch hexagons, I just couldn't resist! These Beadlust posts show the various steps to making the quilt top and the start of  hand-quilting in more detail than this post.

Although I'm still hand-quilting, the end is in sight now. I'm hoping to finish in time for our County Fair in August.

In this post, I thought it might interest you to look at how much time it takes to complete each of the steps in hand piecing and quilting a 3/4" hexie quilt, and the total number of hours involved. I'm basing time estimates for all of the repetitive steps on how long it takes me to do a large number in one sitting, after having practiced... in other words, at my best speed.

Step 1 - Planning the Quilt and Getting Fabrics - time: 20 hours

I decided to make a version of the traditional 1930's Grandmother's Flower Garden quilt that is less common than the one with a path or ring around each of the flowers. I chose this design. Note the green hexie leaves, which form a vertical-horizontal grid.


The final size is 72 x 92 inches, a comfortable size for a twin bed, a total of 4,694 hexies. I wanted to use as many different fabrics in this quilt as possible.

• flowers = 280 different print fabrics with any background color except green or white.
• leaves = 150 different print fabrics in green
• flower centers (repeats OK) = 25 different solids
• double border = 1 print + 1 solid

Although I had collected 30's reproduction fabrics for a few years, I certainly needed more. From a selection of fabrics given to me, fabrics purchased in an eBay auction, and my stash, I found enough to make each of the flowers unique. Although there were not enough greens to make the leaves unique, I had about 60 different green prints, such that each is not repeated more than 3 times in the quilt. So, in the end the quilt includes more than 360 unique fabrics!

Step 2 - Wash and Iron all of the Fabrics - time: 15 hours

Yikes! A few of the fabrics I wanted to use were already washed; most were not. Knowing it should be consistent, and worrying that the reds might bleed, I decided to pre-wash and iron all of the fabrics. Doing this step in stages, as I acquired fabrics, I'm not really sure how long it took, perhaps quite a bit more than the above estimate.

Step 3 - Cutting and Trimming all of the Hexies - time: 28 hours

For each of the  4,694 hexies, I cut a 2" square of fabric, and trimmed off the four corners. Of course, I cut and trimmed in multiples, except for a few that I fussy cut individually. Again, since I did this step in stages, the above time estimate is a bit rough.

Step 4 - Basting the Fabric to the Paper Hexie Forms - time: 235 hours

Once I learned that using YLI quilting thread for basting makes it go much faster than using regular sewing thread, I was able to baste 20 hexies per hour.

Step 5 - Stitching Hexies Together to Make Flowers - time: 105 hours

Averaging 2.5 complete flowers per hour, it took me about two and a half 40-hour-work-weeks to whip-stitch all 238 full and 42 partial flowers. There are 14-17 whip-stitches per 3/4 inch seam.

Step 6 - Stitching a White Hexie Ring Around 130 of the Flowers - time: 130 hours

On average, it takes me 1 hour to whip-stitch 12 white hexies around each flower.

Step 7 - Layout Flowers for Quilt Top; Note Position on Each - time: 4 hours

I didn't fuss too much about the layout, spreading out the flowers randomly, making sure the red ones were evenly spaced, and that no areas were overly dominated by one color. Assigning each row a letter and each position within the row a number, I marked each flower on the back (writing on the center paper piece).

Step 7a - Half Flowers and Double Border All Around - time 90 hours

This is an update, added Feb. 2018. (I can't believe I forgot this important step when writing the original time line.) To make 42 partial flowers to fill in the gaps around the edges of the top, I cut fabrics, basted hexies, joined petals, and then stitched the partials into the gaps. To make the outer border, I made 522 individual hexies, stitched them into rows, and then stitched the rows onto the top.

Step 8 - Sew Flowers into Small Groups - time: 90 hours

To assemble the quilt top, I grouped 8-12 flowers, and whip-stitched them into a solid piece. There were 30 pieces, which took about 3 hours each to complete.

Step 9 - Sew Small Groups Together to Complete Quilt Top - time: 123 hours

I first sewed the small groups into rows, then stitched the rows together. As the sections got larger, the stitching took longer, making it difficult to estimate the time with total accuracy. I did a couple of time tests at different stages of the process in order to figure the above total. I completed this step on March 1st, 2013, one year after basting the first hexie.

Step 10 - Iron/Starch Top, Remove Papers and Basting Stitches - time: 33 hours

Removing all the basting stitches and papers took a lot longer than I would have guessed. But when I look at the pile of basting threads, it begins to make sense.

Step 11 - Assemble Quilt Layers, and Baste - time: 12 hours

Christy and Lunnette helped me layout the back, batting, and top on the floor; then baste in a 4 inch grid. I think we pinned it first, then basted, then removed the pins. On our knees for most of the time, it sure was wonderful to have their help!

Step 10 - Quilt and Embroider the Flower Centers - time: 70 hours

Choosing a floss in a similar color to each flower center, I embroidered a flower. Intentionally, some of the stitches act as quilting stitches, while others slip between the layers and don't show on the back. Around the edges of the quilt, it took about 15 minutes per flower center. Toward the middle of the quilt, it took about 20 minutes per flower center.

Step 11 - Quilt Flower Petals - time: 106 hours

Quilting around the petals of each flower requires turning the quilt 270 degrees for each petal, which is why it takes at least 20 minutes per flower, longer toward the middle of the quilt when the whole weight of the quilt must be constantly shifted. There are 238 whole and 42 partial flowers. I'm figuring an average of 25 minutes per whole and 10 minutes per partial flower.

Step 12 - Quilt Around White Rings - time: 65 hours

Like quilting the flower petals, quilting around the outside edge of each of the 130 white rings requires turning the whole quilt as I work, which adds a lot to the time it takes. I believe quilting the entire top in a diagonal grid of straight lines would take about half the time it takes to follow the curved, zig-zagging path of the hexie flowers, leaves, and rings.

Step 13 - Quilt Around Each of the Leaves - time: 79 hours

Not only does this step require turning the quilt as I stitch 360 degrees around each leaf, it also requires knotting and burying the tail at the start and finish of each leaf. Also I'm changing color of thread to more or less match the fabric color for each set of 4 leaves. Around the edge, it takes about 9 minutes per leaf; toward the center 11 minutes per leaf. There are 474 leaves total, at an average of 10 minutes/leaf.

Step 14 - Assemble Hexies for the Border Facing - time: 37 hours

To face the double (print + blue) border on the back of the quilt requires 522 hexies. To sew them together, forming the border strips, takes about 1 hour per 14 hexies.

Step 15 - Trim Backing and Batting; Blind-stitch Facing to Border - time: 13 hours

There are 264 hexies around the outside edge of the quilt top. Since I have not done this step yet, the time estimate (blind-stitching 20 hexies together per hour) is somewhat rough.

Step 16 - Remove Paper Pieces and Basting from Border and Facing - time: 10 hours

Again, since I have not done this step yet, the time estimate is based on the time it took to remove paper pieces and basting threads from the quilt top.

Step 17 - Blind-stitch Facing to Quilt Back - time: 13 hours

Step 18 - Quilt Around Print Fabric Border - time: 13 hours

Step 19 - Blanket Stitch Around Outside Edge of Quilt - time: 10 hours

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Total Time to Complete Hand-Piecing the Quilt Top: 873 hours

This is equivalent to nearly 20 weeks or 5 months on a 40 hours/week job. It took me a year. Mostly the time flew by as I basted and hand-stitched the little hexies together. Always there was a new print to enjoy, a new stack mounting in size to admire, a growing quilt top to thrill me.

Total Time to Complete Hand-Quilting: 428 hours

Since this job isn't completed yet, the time is only a rough estimate, based on the times it took to do some of the already completed steps. In all, hand quilting will take the equivalent to 10 or 11 weeks of full-time work. I find the quilting rather very boring. After taking a break for more than a year, I started working on it again and hope to be finished by August this year. Audio books are the answer to the tedium for me.

Total Time, Start to Finish: 1,301 hours

With Steps15-19 still to complete, the total is a rough estimate. Still, it is obvious that making a quilt like this, start to finish, requires more than 1,300 hours or the equivalent of over 8 months of full time work. If I were to be paid only minimum wages (2015, Seattle, WA - $11/hr.), the cost of the quilt would be $14,311 + about $500 in materials, or a total of $14,800.  Good thing I intend to keep and use it myself!

UPDATE, July 4, 2016

By June, 2015, I completely finished one corner, an area big enough to photograph so I could submit an entry form to the 2015 La Conner Quilt Festival, sponsored by the La Conner Quilt & Textile Museum. On August 7th, 2015, I received notice that it was juried into the show. Wow! That sent me into high gear for sure. After working non-stop, 7 days a week, and an average of 10 hours per day, I inserted my needle into that quilt for the last/final time on Aug. 24th, 2015, just days before delivering it to the museum. It took me 3 years and 3 months, start to finish!


I was surprised, honored, and incredibly pleased to find out it won the Curator's Award of Excellence, one of the top awards, which then qualified it to be shown at the museum for the month following the Festival. Note, the finished size is 71 x 93 inches, and there are 4,700 individual hexagons in it.


Big work for both hands, but sooooo satisfying!


In fact it was so satisfying that I've started another hexie quilt... Can you believe it? So far, I've made 733 hexie flowers for it! Although they are the same size hexies, there are no reproduction fabrics and the arrangement will be anything but traditional. Don't know why I love the hexagon shape so much... but it's certain that I do.

A week of finishing!!! Oh my, it feels good to finish things, doesn't it?!

Last October, I started the applique process, stitching chick bodies and wings cut from felled wool onto the wool background fabric. Seven months later, 16 chicks, embroidered with threads and beads, run free! Please click the picture to enlarge it, so you can enjoy the fanciful details.

If you are new to this process, you can see the various steps and pictures of the chicks on these posts. Of course, they are inspired by Sue Spargo's exhibit at the La Conner Quilt Museum, by her book, Creative Stitching, and by taking a one-day class from her to get me going. Along the way, other books, embroideries, and drawings also inspired me.


As you might guess, most of the chicks have at least a few beads. Here is one with the main motif embroidered with beads.


And, here is one with just a few beads, the center of the "flowers," and one with no beads at all.

Also note that I've quilted the piece with Danish Flower Thread in a shade which closely matches the background color.

At first, I thought it would be pleasing to embellish the areas between the chicks with flowers, vines, and leaves using three close shades of the background color. Here is an example.


It looks OK when you look at just four chicks with the flower/vine motif in the center. But when I had finished 6 of the areas (sorry no photo), some of them with larger spaces and larger vines/leaves, it looked too busy. It took away from the chicks. I couldn't tell if I was supposed to look at the chicks or the flowers. So I picked out the vines and leaves, leaving just the flowers, which weren't such a distraction.


After sewing on the binding, the chicks seemed to need a little warming around them. So I added a line of stem stitch in variegated pearl-cotton in a magenta color. It pleases me!


Oh, and one more thing... This is a quilt, designed to hang on the wall, with lots of details to enjoy as you view it up close. But what happens to wool felt when it is out in the open? MOTH DAMAGE and DUST are the enemies. My solution? Find, buy, or have somebody make a wall-mounted display case, with a hinged door. Hang the quilt inside the case, which remains closed except when somebody wants to take a closer look. The above, found on the internet, is close to what I have in mind, with a white background of course.


What's next in chick-land? Well, my dear niece just got married... Here is the start of her wedding gift... I'll post a finished photo soon.

Kitty Sorgen, quilter extraordinaire, and Jenny Bowker, the pattern developer, are to blame for this madness! Shimmering Triangles Jenny calls it, and shimmer it does. In fact, it can be over done to the point where it's difficult to look at. But not Kitty's... Kitty, a member of our local guild and the best colorist I know, brought her shimmer quilt to Wednesday night quilting a few months ago, and

It sure was a lovely surprise one day last fall when a representative from the Bead&Button Show called to ask if I would be interested in sending my beaded quilts for exhibition at the 2015 show in Milwaukee, WI.

Would I be interested? Of course I would!!! But since I'm more of a beader and don't have that many beaded quilts, I suggested they also contact my brother, Thom Atkins, who has made a mind-boggling number of beaded quilts in the last 10 years or so.

Brother-sister exhibition... how fun is that! You can see all 22 quilts in the Artisan Area of the Exhibition Hall if you're attending the show, May 27 - June 8. For those who can't make it, here are my quilts, the ones in the show. When you click on the first picture, you can see a slide show with full-size pictures.

It's really special how,in recent years, quilters are interested in beads, and beaders are playing with quilting, both finding ways to expand their creativity! And it's super fun to show with my bro!

If you're a Beadlust reader, you know I worked for three years (more than 1,300 hours) to hand piece, hand embroider, and hand quilt Mama's Garden, with 4,700 3/4-inch hexies, a true labor of love. A big push this spring got it finished in time to enter into the International Quilt Festival in La Conner, WA. Hooray, hooray, the judges accepted it into the show!!!!

This coming weekend, October 2-4, all you quilting enthusiasts will find it rewarding to make the effort and get to La Conner (WA) for the Festival, where you will see an excellent selection of quilts and fiber arts, plus a variety of interesting vendors! Here is the information. Head first for Maple Hall, a huge 2-story building, filled with quilts, at the corner of 1st Street (the main drag) and Douglas Street! Bring your camera, because photos are allowed (at least in the past they were).

What do you think? After all those hours, would it be crazy to even THINK about making another hexie quilt, another one with 3/4-inch hexies? Well, then I guess I'm crazy, because the irresistible call of the hexie hooked me again. And why not re-use the same paper pieces?

This one will not be traditional, and will definitely NOT be hand quilted. It will be hand pieced, using small left-over fabrics (I refuse to call them scraps), cotton prints (but not batiks). I have no idea how I will arrange them, how big it will be, or anything else about how this new project will develop.

The first step was to cut out sets of  2" x 2" squares (6 per set) to make flower petals. So far, I've cut about 130 sets. Here are 80 of them, ready to baste onto the 3/4" paper hexie pieces.

From very small pieces, I cut single 2"  x 2" squares to make flower centers. These I've already basted to the paper hexie pieces.

After basting some of the petals and centers, I started choosing centers for the petal sets. This part is fun! I enjoy "auditioning" various centers until one of them seems right. I'm avoiding high value contrast between petals and centers, because I might want to do a color study with them (no borders).

When the urge gets really strong, I allow myself to start stitching the hexies together to make flowers.

This quilt will probably have about 650 flowers! I've cut 130 so far, each different. I cut flower petals from all of my small pieces, every one. My preference is to have all 650 flowers different.

Sooooooo, if YOU have some small fabric pieces you'd be willing to donate, I'd love to have part of you in my quilt. This is what I need:

The quilting community is awesomely generous!!!  Thanks to all who have sent me scraps for making hexie flowers:


I really understand and appreciate that it takes time to sort through your scraps, selecting some that you feel might work for me, packing them to send, getting them to the post office. In some cases, you even took time to cut them into 2" squares for me... WOW! Bless your hearts!

The most interesting thing is that all the fabrics I've received so far are ones I might have picked myself, yet so far there are no duplicates. As of Oct. 19th, I have cut petal sets for about 650 flowers (from my own scraps and fat quarter stash, as well as scraps I've received from other quilters), all of them unique! That's about 90% of what I need to make the quilt, and certainly enough to keep me busy for a looooooong time. It will probably take me a year or so to baste and stitch all of the flowers, although I admit to going at it with a lot of gusto.

Oh dear, I'm sorry to have neglected posting here for so long. Although many suitable topics and photos have passed through my mind and camera, there just hasn't seemed to be a nice chunk of time available for putting it all together. Today is the day to begin again!

Inspired by Alice, by Marilyn Lidstrom Larson of Willow City, ND (detail of border)

For the past two months, it's been all about quilts and quilting for me, with beading taking a bit of a back seat for a while. My quilt and travel buddy, Lunnette, and I flew to Ontario, California for The Road to California, which is a ginormous quilt show with more than 1,000 quilts on exhibition and over 200 vendors. We gawked (and spent all of our allotted budget) for 3 whole days, barely noticing our fatigue and sore footies.

There are several intriguing subjects to cover, inspired by our experiences there. Today's post is about traditional applique and machine quilting.

Inspired by Alice, by Marilyn Lidstrom Larson of Willow City, ND photo credit (for this photo only): Road 2 CA

Inspired by Alice, by Marilyn Lidstrom Larson, detail showing back

Inspired by Alice, by Marilyn Lidstrom Larson, detail of center

Inspired by Alice, by Marilyn Lidstrom Larson, detail of center quilting

Inspired by Alice, shown in the photos above, won the first prize of $1,000 in the Traditional, Wall, Applique category of the main (judged) exhibit! Take a moment to study the pictures, click on them to enlarge them, notice the way the applique and machine quilting compliment each other. Also think about what this might have looked like if the maker, Marilyn Lidstrom Larson, had hand-quilted her work the way Alice, her grandmother (and inspiration for the central portion of the quilt), would have done. I love this quilt, totally love it, and believe it deserved the award it received.

At the same time, it saddens me that in all the juried/judged shows I've seen (and entered) recently, there is no category specifically for hand sewn quilts... quilts which are hand-pieced, hand-appliqued, hand-embroidered, and/or hand-embellished, and finished with hand-quilting. Nope, hand-sewn quilts are judged right along with machine-sewn quilts. In my observation, machine-quilted pieces are the ones that win almost all the prizes, even in the traditional categories. Why is that? Is hand-quilting considered passe, a thing of our grandmothers' time? Is it because machine-quilting has more pizzazz in the viewers' and makers' eyes? Is it because the machine manufacturers are huge financial supporters of these shows and providers of much of the prize money? Is it because the machine manufacturers run the training programs for judges?

OK, let's look into this subject a bit more. Later, I'll tackle the subject of the influence of the machine manufacturers. For now let's consider this question:

Does machine-quilting enhance quilts that are otherwise hand-sewn?

This fabric is called Kékfestö in Hungarian, a word that roughly translates as blue-dyed or blue-dying. Producing these fabrics is a cottage industry in Hungary, which dates back several centuries. The dye is indigo; the cloth is cotton; and the long, arduous process results in a type of batik fabric. The photo above shows a small fold of each of the fabrics I bought at the blue-dyed studio shown below. (As always, please click on the photos if you'd like to see more detail.)

When in Hungary in October, 2016, my quilting/travel friend (Lunnette) and I, as guests of my Hungarian bead sister, Anna Fehér, had the very exciting experience of visiting the hand-dying studio of Miklós Kovács in the little village of Tiszakécske, SE of Budapest. The studio, located behind his home, includes two rooms, one for printing the raw cloth with a wax resist, and the second for dying the printed cloth with indigo. In front of the building, you can see rods above the deck, which are used for hanging the fabric to dry after it is dyed, and a wagon loaded with printed cloth ready to be dyed.

Meet Mr. Miklós Kovács, now in his 80s! Charming and animated, he is explaining his traditional, hand-dying process to Anna. Blue-dying has been the Kovács family's livelihood since 1878, each new generation being trained by the previous Master. It is strictly a family affair. Miklós, his wife, Margit, and their two daughters, Gabriella and Mária, currently produce about 10,000 meters of Kékfestö (blue-dyed) fabric every year. When Mr. and Mrs. Kovács retire, the business will pass to their daughters. This post shows how they turn plain white cloth into beautiful fabrics with white motifs on an indigo background.

First, they need thousands of meters of fine-quality, tightly-woven, raw cotton cloth, which is rinsed to remove impurities, then carefully ironed and rolled onto wooden rods which fit onto the printing machine. This pile of untreated cotton cloth, manufactured in Turkey, is the remainder of a big shipment purchased at the start of the year.

Next they need a print block or plate. These are made with wire pins of various diameters, which are pounded into blocks of dense wood. Here you see the many plate choices available in the Kovács studio, each yielding a different motif on the fabric. The length of each print block is the same as the width of the fabric; the width is the width of the pattern repeat, generally designed to be about 4.5 inches..

This is the end of one of the print blocks, showing how the design is formed by setting metal pins of different diameters into the wooden block.

And here is the fabric (after dying it with indigo, and removing the wax resist), which was printed with the block in the photo above it. Naturally, a half-meter of this one came home with me!

This is the machine which is used to print the motif on the raw cotton cloth with a wax resist. Mr. Kovács keeps his printing machine, built in Germany 120 years ago, in good running condition with machinist skills he learned alongside his father.

You can see the sprocket, lower right, which is adjusted to advance the fabric through the machine in increments exactly the length of the pattern repeat. For most motifs, the fabric advances 4 to 5 inches after each time the print block is applied to the fabric, thus revealing the next short stretch of un-printed cloth.

Here you can see many meters of raw cotton cloth, suspended on a metal rod at the back of the printing press. There is a leader of waste cloth stitched to the end of the roll which has been fed through the rollers of the machine to get the process started.

At the front of the printing machine, a worker swipes a tray with wax resist, which is tinted green so that it will be visible on the printed cloth. The printing block touches down on the waxed tray, picks up a coating of was, and then presses firmly against the fabric.

After being imprinted with wax resist, the fabric is wound up and down through a drying rack located behind the printing machine.

When it is dry, the printed fabric is folded and stacked until there is a sufficient quantity to begin the dying process. You can see that some of the raw cloth in this pile was pre-dyed pink, blue, or beige. After over-dying with indigo and removing the resist, the motif on these pieces will be pink, blue or beige with an indigo background, rather than the much more common white motif with an indigo background.

This close-up photo shows how the fabric looks after the wax resist (tinted green so that is shows on white cloth) is dry. This is the motif being printed while we were there. Liking the design a lot, I was very pleased to find finished fabric in this pattern available to purchase.

And this is how the cloth will look after it is dyed with indigo, the wax resist removed, and the fabric washed and ironed. As you might have already guessed, a half-meter of this one came home with me!

As we watch the cloth passing slowly through the rollers of the printing machine, Lunnette holds a scrap of dyed fabric which was tied to the machine, indicating the motif currently being printed.

At last, we get to the dye pot!  Here on the burner, a concentrated indigo dye formula is being readied to pour into the dye vat.

Don't forget to wear those heavy rubber gloves, or the skin on your hands will be tinged with blue for a long time.
Mr. Kovács gave a long, animated talk (all in Hungarian, which I only slightly comprehend) about the whole process of blue dying. You've already seen how the cloth is printed with wax resist. The next step is to dye the background.

The cloth is dyed in a vat with the indigo dye-bath at 85 degrees C., then washed to remove the wax and rinsed to remove the excess dye. After rinsing, the cloth is looped over racks to dry outdoors, which completes the dying process. Sadly, he did no dying while we were there, so I don't have pictures or first-hand experience with precisely how it is done to share with you.

However the fabric is not yet ready to use. It must be starched, dried, and then pressed using both steam and steel rollers with heavy pressure, in order to create the traditionally desirable shiny finish on the cloth. Finally, the fabric is folded onto bolts for distribution to shops and end-users.

We learned how they hand-print motifs on cloth using a template, such that after dying, the fabric can be cut out and hemmed as a finished table cloth. You can see the templates hanging on the wall. The desired template is placed over the fabric, and a pencil used to mark the registration points for lining up the printing block. Fabrics which have already been printed are stacked in front of the templates. After being dyed, this fabric will be made into table cloths and runners of various sizes.

This is a section of cloth which as been marked with a template, and hand-stamped with wax resist. After dying with indigo and removing the wax, it will be made into a rectangular table cloth with a lovely double border all the way around.

Mrs. Kovács demonstrates for us how she lines up the print block with the penciled registration marks, and then lowers it onto the fabric. With the stamp resting on the cloth, she lightly pounds it with her fist to set the wax into the fabric. It was obvious to us that carefully making each wax impression all the way around the cloth takes a lot of time and concentration. As you an see below, the results of her hand-printing are stunning!.

Here is an example of a hand-stamped, indigo-dyed fabric made into a round table cloth. Obviously, it came home with me, and is perfect for my kitchen table!  This fabric is quite wide, and takes a great deal of space and time to print. Yet, the prices were very reasonable!

After spending several hours in the studio, we were invited to the house for a shopping bonanza! Fortunately, hoping ahead of time that we would be visiting a Kékfestö studio when we got to Hungary, we had saved our allowances for some months, and were prepared to shop for future quilting and sewing projects. The prices, ranging $10 to $15 per meter depending on the width, seemed very reasonable considering the quality of the fabric, and the extreme amount of work that goes into producing it.

In addition to yardage, both of us bought a table cloth and an apron. Mine is shown above.

What a totally delightful experience we had! Mr. and Mrs. Kovács are as friendly and nice as can be!  If you ever get to Hungary, you can find their fabrics and finished products in the picturesque town of Szentendre, just a short drive or train ride north of Budapest on the Danube River. Here is a website link.

To end our visit at the Kovács studio, here is a tribute photo of the elder Mr. Kovács, who during his boyhood in the 1920's was immersed in the world of his family's blue-dying business, and who continued producing Kékfestö indigo-dyed fabrics for his entire life, while training his own son to continue the trade.

Like his father, the younger Mr. Kovács has trained his daughters to continue when he retires, although I'm sure he has many more years to go, probably well into his 90s..

My last two photos in this post are a little surprise for you. Before falling in love with beading and quilting, my main passion was Hungarian folk dancing. I danced in a performance group for 10 years (and later became one of the group's choreographers), performing at many events in the Seattle area, including Bumbershoot and the Folklife Festival. We also performed at the World's Fair when it was in Vancouver, British Columbia. I and several of the other dancers in the group made most of our costumes using Hungarian fabrics and original costumes as patterns.

It was folk music and dance that first called my heart and soul into Hungary, where I have since spent a cumulative total of well over a year of my life, spaced over 14 different visits so far.

So, here you go. This is me, wearing a costume I made with Kékfestö fabric for performing the dances of the Szatmár region, located in northeastern Hungary. This photo was taken in September, 1986 at the World's Fair in Vancouver, Canada, where we performed on two separate occasions.

And this is me on stage at a festival in Redmond, WA, happy as can be, Hungarian folk music, song and dance, filling me with joy!  Michael Kappleman and I are the second couple from the left.

So you see...  Kékfestö and I go back a long way. Next, I'll be quilting with it!

*****
My apologies to Hungarians for not using the correct accent mark for the last letter of the Hungarian word Kékfestö. I spent 4 hours trying to do it, but could not get Blogger to accept anything I tried.

I learned to create decorative painted papers from Paulus Berensohn, Albie Smith, Lynne Perrella, Anne Bagby, and others by taking wonderful workshops from them in the 1990s, and soon adapted their techniques to making books with beadwork inserted into the covers, like the one below. I use my painted papers on the book covers and for signature covers, which look great with this type of binding.

But after moving to the island where I've lived for 20 years now, I gradually got into quilting and textile arts, kept the beadwork going, and cut way back on painting. Until now!

Inspired, cajoled, and arm-twisted by one of the Textile Guild members, who wants to learn how to paint papers and make books like mine, I agreed to teach a workshop (2 days of painting and 2 days of bookmaking) for the guild members. Of course, since I hadn't painted for many years, I first had to get back into practice. Yay! What fun I've been having, painting in my shed (thankfully heated). The paper below is my favorite of about 20 painted in the last two weeks. The size is 18 x 24 inches. (Please click to see the details!)

And below are two more to go with it.  The paper above will be used for a book cover, even though it will be hard for me to cut it up. The two papers below will be cut (horizontally) into thirds, and used as signature covers. For those unfamiliar with bookmaking, a signature is a section of papers within a book. Each of the six signatures in my book will be covered with this decorative paper.


It's a fun, playful, and experimental process to paint like this, easier for me than it would be to paint figuratively (landscape, still life, or people). With this type of painting, I just mix matte medium with a color or two of acrylic paint, and apply it by rolling, stamping, stenciling in layers. I keep adding layers until I like it, at which point it's a finished paper. There is always at least part of each paper that pleases me enough to use it for bookmaking and paper arts.

These are the basic supplies and tools I use to paint the papers:

1.) Although acrylic paints and this method can be used to paint on almost any surface or paper, I usually paint on 80-90# drawing paper to make decorative papers.

2.) I prefer using a roller to apply background colors or glazes, rather than a brush. My favorite, purchased online from Dick Blick Art Supplies, is a 2.2"  dense foam roller.

3.) Assorted stamps and stencils. I carve a lot of my own stamps, as you will see below, but sometimes also use commercial stamps. Note that commercial rubber stamps with fine detail for stamping with inks do not work well with acrylics, as the paint clogs the fine lines, ruining the stamp.

4.) Assorted materials, such as a notched adhesive-spreader, coarse sea-sponge, webbed food packaging materials, and bubble wrap are useful to print, texture, and stencil.

5.) Acrylic paints. I use heavy-body paint (rather than fluid acrylics) of student-grade or better quality.

6.) Matte medium and glazing medium (slow drying) are added to extend the paint.

I know, maybe you're thinking I should do a video tutorial. OK. You set it up, and I'll do it. In the meantime, I'd rather be painting...  Here are three more recently painted papers for your viewing pleasure (I hope).



The one directly above is my attempt to emulate batik fabric from India. I had a bedspread back in the hippy 60s with a burgundy design on a mustard yellow background, the memory of which was the inspiration for this paper. I carved all of the stamps used to make it.

I love to carve my own stamps, and sometimes cut my own stencils as well. Let's take a look at that process. It's quite easy really, requiring only a block of Speedy-Carve (or other high-density rubber carving block), and a Speed-Ball Carving tool. Designs can be free cut, drawn right on the carving block, or transferred from a tracing. Here's a fairly decent tutorial on the stamp carving process.

Designs? Well, everywhere I look I see possibilities for carving more stamps! Recently, visiting a fabric store with my quilting buddies, I spied a fat quarter of batik fabric with a luscious design. Here is the fabric:

And here is the stamp I carved from a tracing I made of the central flower. The stamp is the same size as on the fabric, about 3" in diameter.

I also cut a stencil, which you can see below. A friend had a commercial stencil of these three leaves, which I really liked. After borrowing her stencil to use on one of my papers, I traced the painted image, and cut out my own stencil. The tool in this image is a Speed-Ball cutter, which I use to carve the rubber to make stamps.

You've already seen (way above) the whole sheet of paper I painted using just this stamp and stencil, but here's a detail. If you click to enlarge, you can see more about how I paint in layers, first the background colors, next the leaves, then a different color over-stencil on the leaves, and last the flowers.

If you like to play with paint, you might want to give it a try! Here are just a few more of my recently painted papers to tempt you...





I'll be teaching a 2-day bookmaking workshop in mid-May using papers like these to create three different books. There may still be a spot or two available in the class. If you are interested, you can contact me for more information.

You may want to visit my website to see more about my handmade books and painted papers. And there are several earlier posts here on Beadlust with pictures of books made with painted decorative papers and beading by my students, as well as other related topics. Here are a few of them:

1. Wedding book
2. Lisa's book (from a workshop I taught in Wisconsin); her fabulous website is here.
3. Susan's book (from a workshop I taught in Wisconsin)
4. painting papers for making Christmas cards
5. Using symbols in our art and symbols in acrylic painting  
6. Using these techniques to paint with dyes on fabric and more fabric paint/dye examples

Susan Anderson took my bookmaking/painting/beading workshop twice at the Coupeville Art Center. These are the papers for her first book, and if you click to enlarge, you can also see her finished book.

And, to close this post, here is a photo of some of the handmade books I've created over the years... most of them utilize decorative painted papers and bead embroidery.

Thanks for sticking with me to the end of this long post :)!

 

It All Started with Hexie-lust!

Getting Hooked on Crochet

Original Crochet-Along, Frida's Flowers

Bored with making 6 identical flowers - Colors calling us!

Designing Our Afghans

Entering at the San Juan County Fair

Charles (Charlie) Tennyson has been appointed Princeton’s new director of Transportation and Parking Services following a national search to fill the position. He previously served for five years as deputy director of the department.

Gilbert Harman, the James S. McDonnell Distinguished University Professor of Philosophy, Emeritus, died at his home in Princeton on Nov. 13 after a long illness with Alzheimer’s. He was 83.

The new producing artistic director of the theater and music theater season at the arts center sat for an interview for our ‘What I think’ series.

Jacques R. Fresco, the emeritus Damon B. Pfeiffer Professor in the Life Sciences and an emeritus professor of molecular biology, died on Dec. 5. He served on Princeton's faculty for 53 years before retiring in July 2013.

The Princeton microbiologist has also created a non-infectious version of the COVID-19 virus that researchers can study safely.

Arden helped usher computers into widespread use and played a key role in establishing Princeton's Department of Computer Science.

Tanyaradzwa Tawengwa, a Princeton alumna and current Hodder Fellow who's a composer, vocalist and scholar, has come full circle since the day she sat in a McCarter audience 10 years ago and made a wish to one day be up on that stage. 

In honor of his parents, Chemistry Nobel Laureate David MacMillan has founded The May and Billy MacMillan Foundation to provide educational opportunities for financially disadvantaged students in Scotland.

Austin Newton, a founding member of the Department of Molecular Biology, established a new experimental system and mentored generations of undergraduates, graduate students and postdoctoral fellows. He died May 13 in Princeton at age 85.

Daniel Osherson, Princeton’s Henry R. Luce Professor in Information Technology, Consciousness, and Culture, Emeritus, known for his  creative scientific explorations with collaborators in many disciplines, died at home on Sept. 4. 

The book joins others by Princeton faculty on The New Yorker list of the year’s best. Jarrett gives a talk at Labyrinth Books on Thursday, Nov. 3.

“His mathematical legacy is enormous,” said John D’Angelo *76. “Joe was among the most friendly, popular and influential mathematicians of his generation.”

Hubbard, the top-ranking information technology administrator at the Georgia Institute of Technology, will join the University in January.

Two full professors and four assistant professors have been newly appointed to the Princeton University faculty.

The Princeton University Board of Trustees has approved the appointment of 14 faculty members, including two full professors, two associate professors and 10 assistant professors.

The Princeton University Board of Trustees has approved the appointment of 22 faculty members, including five full professors, one associate professor and 16 assistant professors.

ⓒ keico has added a photo to the pool:

in silent.

'roid week 2024, day 4

A lecture on the legacy of Catholic women in the arts and sciences.

Men's Basketball vs Nazareth

Geosciences Department Lecture Series

A 30-minute guided tour of the latest exhibition in the Milberg Gallery in Firestone Library at Princeton University. Tours meet in the lobby of Firestone Library. The exhibition is open Monday to Friday from 10 a.m. to 6 p.m., and 11 a.m. to 6 p.m. on Saturday and Sunday in the Milberg Gallery, Firestone Library. Open to the public. “Monsters and Machines: Caricature, Visual Satire, and the Twentieth-Century Bestiary” will focus on the use of bestiary – animal or zoological motifs – in visual satire during the period between World War I and the end of the Cold War. Drawing from PUL’s rich collections of 20th-century posters, illustrated periodicals, and ephemera from North America, Europe, Asia, Eurasia, and the Middle East, the exhibition will look at works of weaponized visual humor created by and aimed at exponents of different national cultures and ideologies. The exhibition will run from September 12 to December 8, 2024.

Early Music Princeton presents a melange of Italian and English masterpieces. The EMP Singers will present pieces representing the “Cult of Melancholy”- mournful pieces by Dowland, Tallis, and Campion that celebrate the beauty and artistry of romantic despair. The EMP Treble quintet will be performing pieces by Strozzi, Monteverdi and Morley: love songs of passion and torment! To complete the program, the EMP Chamber Players and Viol Consort will present spirited Italian works by Frescobaldi and Corelli alongside the rich textures of English composers Tomkins and Coperario.

About the Event Our resident ensemble of Princeton University performance faculty and talented students presents a Sunday-afternoon program of songs with and without words written by female composers on both sides of the Atlantic. Songs for mezzo-soprano and piano by prolific lieder composer Josephine Lang and for mezzo-soprano and mixed chamber ensemble by Dame Ethel Smyth bookend the program, with works for string quartet, solo piano, and flute, viola, and harp, that reference American, Jamaican, and European song and poetry in between. This event is presented by Princeton University Concerts. For a full event listing and tickets, please visit this link.

An introduction to the typesetting system LaTeX will be provided using the online editor Overleaf. LaTeX allows advanced document preparation and typesetting of complex mathematical formulas. Overleaf offers advanced functionality like collaborative editing and versioning. Peer consultations and troubleshooting also offered throughout the semester. Visit https://libcal.princeton.edu/appointments/jfz to book an appointment.

Princeton Jazz Vocal Ensemble, directed by Michelle Lordi, presents a series of jazz pieces from the year 1959.

In this talk, Graham Neubig will discuss a new frontier in AI models, vision-language models that understand the world's cultures. The talk will be in two parts. First, Neubig will discuss training of multilingual multimodal multicultural models that understand images and text, and have increased ability to answer culture-specific questions about multimodal data. Second, he will discuss work on "image transcreation", where models have been developed that can transform images to make them more relevant to a particular culture. This work has applications in a number of areas, such as cultural localization of educational materials (to accompany translated text). While these methods cover many languages, African and not, the talk will focus on examples specifically from the African context, and challenges we currently face therein.

“Chigumadzi argues that within the liberal international order, it is “reasonable” and “workable” to struggle to end apartheid and racial segregation, while it is “unreasonable” and “unworkable” to struggle to end settler colonialism and indigenous land dispossession. In arguing that apartheid is overrepresented in the International Left’s racial discourse and historiography, Chigumadzi draws from generations of Black South African political activists, philosophers, and historians—most notably from the Pan Africanist-Black Consciousness Tradition. These traditions critique apartheid’s relatively short 54 years of institutionalized racial segregation as the paradigmatic historical framework for analyzing South Africa’s three centuries of settler colonialism and land dispossession. Drawing from this black radical critique, Chigumadzi rejects the liberal notion that apartheid’s end is the object of liberation struggle, and, instead asserts the centrality of the struggle for the return of indigenous lands.” Dr. Panashe Chigumadzi is an award-winning writer and Assistant Professor of African History at Brandeis University. Chigumadzi holds a doctorate from Harvard University’s Department of African and African American Studies, and a masters in African Literature from the University of the Witwatersrand, Johannesburg, South Africa.

Give yourself an extra relaxation boost with an aromatherapy pillow that you’ll customize with fabric and essential oils of your own choosing. The pillow can be hand-stitched or you can use a Makerspace-provided sewing machine. All supplies will be provided. Drop-ins welcome! Come for the entire time or only part of the session. Registration is optional, but if you know you’ll be attending please register so we can anticipate the number of people to expect.

Wednesday, November 20, 2024 7-8:30PM: Speed Dating 9PM: Concert featuring the Isidore String Quartet Find your perfect harmony among music-loving singles* in your age group by participating in 8-minute speed dates while enjoying catered appetizers on the historic Princeton University campus! Everyone will then head over to the concert hall to experience the trailblazing Isidore String Quartet. May you enjoy Isidore with a fellow music-lover you adore! Age Groups: Group Do: 24-39 Group Re: 40-59 Group Mi: 60+ Tickets for the full evening—admission to both the Do-Re-Meet event and the ensuing concert—are $50 General/$25 Student (an $80 value). If you already have a ticket to the concert and want to add on this experience, please contact us. *This event is designated for individuals seeking heterosexual connections. There will be an LGBTQIA+ and Allies Mingle on Saturday, December 7, 2024. To learn more about the Do-Re-Meet program and see more of Princeton University Concerts' social events for music lovers, click here. This event is presented by Princeton University Concerts. For a full event listing and tickets, please visit this link. Presented in partnership with TheSinglesGroup.com and Olsson's Fine Foods.