Leukocyte recruitment is a universal feature of tissue inflammation and regulated by the interactions of chemokines with their G protein–coupled receptors. Activation of CC chemokine receptor 2 (CCR2) by its cognate chemokine ligands, including CC chemokine ligand 2 (CCL2), plays a central role in recruitment of monocytes in several inflammatory diseases. In this study, we used phosphoproteomics to conduct an unbiased characterization of the signaling network resulting from CCL2 activation of CCR2. Using data-independent acquisition MS analysis, we quantified both the proteome and phosphoproteome in FlpIn-HEK293T cells stably expressing CCR2 at six time points after activation with CCL2. Differential expression analysis identified 699 significantly regulated phosphorylation sites on 441 proteins. As expected, many of these proteins are known to participate in canonical signal transduction pathways and in the regulation of actin cytoskeleton dynamics, including numerous guanine nucleotide exchange factors and GTPase-activating proteins. Moreover, we identified regulated phosphorylation sites in numerous proteins that function in the nucleus, including several constituents of the nuclear pore complex. The results of this study provide an unprecedented level of detail of CCR2 signaling and identify potential targets for regulation of CCR2 function.

The CRISPR/Cas9 nucleases have been widely applied for genome editing in various organisms. Cas9 nucleases complexed with a guide RNA (Cas9–gRNA) find their targets by scanning and interrogating the genomic DNA for sequences complementary to the gRNA. Recognition of the DNA target sequence requires a short protospacer adjacent motif (PAM) located outside this sequence. Given that the efficiency of target location may depend on the strength of interactions that promote target recognition, here we sought to compare affinities of different Cas9 nucleases for their cognate PAM sequences. To this end, we measured affinities of Cas9 nucleases from Streptococcus pyogenes, Staphylococcus aureus, and Francisella novicida complexed with guide RNAs (gRNAs) (SpCas9–gRNA, SaCas9–gRNA, and FnCas9–gRNA, respectively) and of three engineered SpCas9–gRNA variants with altered PAM specificities for short, PAM-containing DNA probes. We used a “beacon” assay that measures the relative affinities of DNA probes by determining their ability to competitively affect the rate of Cas9–gRNA binding to fluorescently labeled target DNA derivatives called “Cas9 beacons.” We observed significant differences in the affinities for cognate PAM sequences among the studied Cas9 enzymes. The relative affinities of SpCas9–gRNA and its engineered variants for canonical and suboptimal PAMs correlated with previous findings on the efficiency of these PAM sequences in genome editing. These findings suggest that high affinity of a Cas9 nuclease for its cognate PAM promotes higher genome-editing efficiency.

Arrestin-1 is the arrestin family member responsible for inactivation of the G protein–coupled receptor rhodopsin in photoreceptors. Arrestin-1 is also well-known to interact with additional protein partners and to affect other signaling cascades beyond phototransduction. In this study, we investigated one of these alternative arrestin-1 binding partners, the glycolysis enzyme enolase-1, to map the molecular contact sites between these two proteins and investigate how the binding of arrestin-1 affects the catalytic activity of enolase-1. Using fluorescence quench protection of strategically placed fluorophores on the arrestin-1 surface, we observed that arrestin-1 primarily engages enolase-1 along a surface that is opposite of the side of arrestin-1 that binds photoactivated rhodopsin. Using this information, we developed a molecular model of the arrestin-1–enolase-1 complex, which was validated by targeted substitutions of charge-pair interactions. Finally, we identified the likely source of arrestin's modulation of enolase-1 catalysis, showing that selective substitution of two amino acids in arrestin-1 can completely remove its effect on enolase-1 activity while still remaining bound to enolase-1. These findings open up opportunities for examining the functional effects of arrestin-1 on enolase-1 activity in photoreceptors and their surrounding cells.

Cone photoreceptors in the retina enable vision over a wide range of light intensities. However, the processes enabling cone vision in bright light (i.e. photopic vision) are not adequately understood. Chromophore regeneration of cone photopigments may require the retinal pigment epithelium (RPE) and/or retinal Müller glia. In the RPE, isomerization of all-trans-retinyl esters to 11-cis-retinol is mediated by the retinoid isomerohydrolase Rpe65. A putative alternative retinoid isomerase, dihydroceramide desaturase-1 (DES1), is expressed in RPE and Müller cells. The retinol-isomerase activities of Rpe65 and Des1 are inhibited by emixustat and fenretinide, respectively. Here, we tested the effects of these visual cycle inhibitors on immediate, early, and late phases of cone photopic vision. In zebrafish larvae raised under cyclic light conditions, fenretinide impaired late cone photopic vision, while the emixustat-treated zebrafish unexpectedly had normal vision. In contrast, emixustat-treated larvae raised under extensive dark-adaptation displayed significantly attenuated immediate photopic vision concomitant with significantly reduced 11-cis-retinaldehyde (11cRAL). Following 30 min of light, early photopic vision was recovered, despite 11cRAL levels remaining significantly reduced. Defects in immediate cone photopic vision were rescued in emixustat- or fenretinide-treated larvae following exogenous 9-cis-retinaldehyde supplementation. Genetic knockout of Des1 (degs1) or retinaldehyde-binding protein 1b (rlbp1b) did not eliminate photopic vision in zebrafish. Our findings define molecular and temporal requirements of the nonphotopic or photopic visual cycles for mediating vision in bright light.

The quinoprotein glycine oxidase from the marine bacterium Pseudoalteromonas luteoviolacea (PlGoxA) uses a protein-derived cysteine tryptophylquinone (CTQ) cofactor to catalyze conversion of glycine to glyoxylate and ammonia. This homotetrameric enzyme exhibits strong cooperativity toward glycine binding. It is a good model for studying enzyme kinetics and cooperativity, specifically for being able to separate those aspects of protein function through directed mutagenesis. Variant proteins were generated with mutations in four active-site residues, Phe-316, His-583, Tyr-766, and His-767. Structures for glycine-soaked crystals were obtained for each. Different mutations had differential effects on kcat and K0.5 for catalysis, K0.5 for substrate binding, and the Hill coefficients describing the steady-state kinetics or substrate binding. Phe-316 and Tyr-766 variants retained catalytic activity, albeit with altered kinetics and cooperativity. Substitutions of His-583 revealed that it is essential for glycine binding, and the structure of H583C PlGoxA had no active-site glycine present in glycine-soaked crystals. The structure of H767A PlGoxA revealed a previously undetected reaction intermediate, a carbinolamine product-reduced CTQ adduct, and exhibited only negligible activity. The results of these experiments, as well as those with the native enzyme and previous variants, enabled construction of a detailed mechanism for the reductive half-reaction of glycine oxidation. This proposed mechanism includes three discrete reaction intermediates that are covalently bound to CTQ during the reaction, two of which have now been structurally characterized by X-ray crystallography.

Multidrug resistance (MDR) in cancer arises from cross-resistance to structurally- and functionally-divergent chemotherapeutic drugs. In particular, MDR is characterized by increased expression and activity of ATP-binding cassette (ABC) superfamily transporters. Sphingolipids are substrates of ABC proteins in cell signaling, membrane biosynthesis, and inflammation, for example, and their products can favor cancer progression. Glucosylceramide (GlcCer) is a ubiquitous glycosphingolipid (GSL) generated by glucosylceramide synthase, a key regulatory enzyme encoded by the UDP-glucose ceramide glucosyltransferase (UGCG) gene. Stressed cells increase de novo biosynthesis of ceramides, which return to sub-toxic levels after UGCG mediates incorporation into GlcCer. Given that cancer cells seem to mobilize UGCG and have increased GSL content for ceramide clearance, which ultimately contributes to chemotherapy failure, here we investigated how inhibition of GSL biosynthesis affects the MDR phenotype of chronic myeloid leukemias. We found that MDR is associated with higher UGCG expression and with a complex GSL profile. UGCG inhibition with the ceramide analog d-threo-1-(3,4,-ethylenedioxy)phenyl-2-palmitoylamino-3-pyrrolidino-1-propanol (EtDO-P4) greatly reduced GSL and monosialotetrahexosylganglioside levels, and co-treatment with standard chemotherapeutics sensitized cells to mitochondrial membrane potential loss and apoptosis. ABC subfamily B member 1 (ABCB1) expression was reduced, and ABCC-mediated efflux activity was modulated by competition with nonglycosylated ceramides. Consistently, inhibition of ABCC-mediated transport reduced the efflux of exogenous C6-ceramide. Overall, UGCG inhibition impaired the malignant glycophenotype of MDR leukemias, which typically overcomes drug resistance through distinct mechanisms. This work sheds light on the involvement of GSL in chemotherapy failure, and its findings suggest that targeted GSL modulation could help manage MDR leukemias.

Interferon-regulated myxovirus resistance protein B (MxB) is an interferon-induced GTPase belonging to the dynamin superfamily. It inhibits infection with a wide range of different viruses, including HIV-1, by impairing viral DNA entry into the nucleus. Unlike the related antiviral GTPase MxA, MxB possesses an N-terminal region that contains a nuclear localization signal and is crucial for inhibiting HIV-1. Because MxB previously has been shown to reside in both the nuclear envelope and the cytoplasm, here we used bioinformatics and biochemical approaches to identify a nuclear export signal (NES) responsible for MxB's cytoplasmic location. Using the online computational tool LocNES (Locating Nuclear Export Signals or NESs), we identified five putative NES candidates in MxB and investigated whether their deletion caused nuclear localization of MxB. Our results revealed that none of the five deletion variants relocates to the nucleus, suggesting that these five predicted NES sequences do not confer NES activity. Interestingly, deletion of one sequence, encompassing amino acids 505–527, abrogated the anti-HIV-1 activity of MxB. Further mutation experiments disclosed that amino acids 515–519, and Pro-515 in particular, regulate MxB oligomerization and its binding to HIV-1 capsid, thereby playing an important role in MxB-mediated restriction of HIV-1 infection. In summary, our results indicate that none of the five predicted NES sequences in MxB appears to be required for its nuclear export. Our findings also reveal several residues in MxB, including Pro-515, critical for its oligomerization and anti-HIV-1 function.

Phosphoglycerate kinase 1 (PGK1) plays important roles in glycolysis, yet its forward reaction kinetics are unknown, and its role especially in regulating cancer cell glycolysis is unclear. Here, we developed an enzyme assay to measure the kinetic parameters of the PGK1-catalyzed forward reaction. The Km values for 1,3-bisphosphoglyceric acid (1,3-BPG, the forward reaction substrate) were 4.36 μm (yeast PGK1) and 6.86 μm (human PKG1). The Km values for 3-phosphoglycerate (3-PG, the reverse reaction substrate and a serine precursor) were 146 μm (yeast PGK1) and 186 μm (human PGK1). The Vmax of the forward reaction was about 3.5- and 5.8-fold higher than that of the reverse reaction for the human and yeast enzymes, respectively. Consistently, the intracellular steady-state concentrations of 3-PG were between 180 and 550 μm in cancer cells, providing a basis for glycolysis to shuttle 3-PG to the serine synthesis pathway. Using siRNA-mediated PGK1-specific knockdown in five cancer cell lines derived from different tissues, along with titration of PGK1 in a cell-free glycolysis system, we found that the perturbation of PGK1 had no effect or only marginal effects on the glucose consumption and lactate generation. The PGK1 knockdown increased the concentrations of fructose 1,6-bisphosphate, dihydroxyacetone phosphate, glyceraldehyde 3-phosphate, and 1,3-BPG in nearly equal proportions, controlled by the kinetic and thermodynamic states of glycolysis. We conclude that perturbation of PGK1 in cancer cells insignificantly affects the conversion of glucose to lactate in glycolysis.

Site-specific recombinases, such as Cre, are a widely used tool for genetic lineage tracing in the fields of developmental biology, neural science, stem cell biology, and regenerative medicine. However, nonspecific cell labeling by some genetic Cre tools remains a technical limitation of this recombination system, which has resulted in data misinterpretation and led to many controversies in the scientific community. In the past decade, to enhance the specificity and precision of genetic targeting, researchers have used two or more orthogonal recombinases simultaneously for labeling cell lineages. Here, we review the history of cell-tracing strategies and then elaborate on the working principle and application of a recently developed dual genetic lineage-tracing approach for cell fate studies. We place an emphasis on discussing the technical strengths and caveats of different methods, with the goal to develop more specific and efficient tracing technologies for cell fate mapping. Our review also provides several examples for how to use different types of DNA recombinase–mediated lineage-tracing strategies to improve the resolution of the cell fate mapping in order to probe and explore cell fate–related biological phenomena in the life sciences.

Site-specific arrest of RNA polymerases (RNAPs) is fundamental to several technologies that assess RNA structure and function. Current in vitro transcription “roadblocking” approaches inhibit transcription elongation by blocking RNAP with a protein bound to the DNA template. One limitation of protein-mediated transcription roadblocking is that it requires inclusion of a protein factor extrinsic to the minimal in vitro transcription reaction. In this work, we developed a chemical approach for halting transcription by Escherichia coli RNAP. We first established a sequence-independent method for site-specific incorporation of chemical lesions into dsDNA templates by sequential PCR and translesion synthesis. We then show that interrupting the transcribed DNA strand with an internal desthiobiotin-triethylene glycol modification or 1,N6-etheno-2'-deoxyadenosine base efficiently and stably halts Escherichia coli RNAP transcription. By encoding an intrinsic stall site within the template DNA, our chemical transcription roadblocking approach enables display of nascent RNA molecules from RNAP in a minimal in vitro transcription reaction.

The heterodimeric cytokine interleukin-23 (IL-23 or IL23A/IL12B) is produced by dendritic cells and macrophages and promotes the proinflammatory and regenerative activities of T helper 17 (Th17) and innate lymphoid cells. A recent study has reported that IL-23 is also secreted by lung adenoma cells and generates an inflammatory and immune-suppressed stroma. Here, we observed that proinflammatory tumor necrosis factor (TNF)/NF-κB and mitogen-activated protein kinase (MAPK) signaling strongly induce IL23A expression in intestinal epithelial cells. Moreover, we identified a strong crosstalk between the NF-κB and MAPK/ERK kinase (MEK) pathways, involving the formation of a transcriptional enhancer complex consisting of proto-oncogene c-Jun (c-Jun), RELA proto-oncogene NF-κB subunit (RelA), RUNX family transcription factor 1 (RUNX1), and RUNX3. Collectively, these proteins induced IL23A secretion, confirmed by immunoprecipitation of endogenous IL23A from activated human colorectal cancer (CRC) cell culture supernatants. Interestingly, IL23A was likely secreted in a noncanonical form, as it was not detected by an ELISA specific for heterodimeric IL-23 likely because IL12B expression is absent in CRC cells. Given recent evidence that IL23A promotes tumor formation, we evaluated the efficacy of MAPK/NF-κB inhibitors in attenuating IL23A expression and found that the MEK inhibitor trametinib and BAY 11–7082 (an IKKα/IκB inhibitor) effectively inhibited IL23A in a subset of human CRC lines with mutant KRAS or BRAFV600E mutations. Together, these results indicate that proinflammatory and mitogenic signals dynamically regulate IL23A in epithelial cells. They further reveal its secretion in a noncanonical form independent of IL12B and that small-molecule inhibitors can attenuate IL23A secretion.

The arrangement of functionally-related genes in operons is a fundamental element of how genetic information is organized in prokaryotes. This organization ensures coordinated gene expression by co-transcription. Often, however, alternative genetic responses to specific stress conditions demand the discoordination of operon expression. During cold temperature stress, accumulation of the gene encoding the sole Asp–Glu–Ala–Asp (DEAD)-box RNA helicase in Synechocystis sp. PCC 6803, crhR (slr0083), increases 15-fold. Here, we show that crhR is expressed from a dicistronic operon with the methylthiotransferase rimO/miaB (slr0082) gene, followed by rapid processing of the operon transcript into two monocistronic mRNAs. This cleavage event is required for and results in destabilization of the rimO transcript. Results from secondary structure modeling and analysis of RNase E cleavage of the rimO–crhR transcript in vitro suggested that CrhR plays a role in enhancing the rate of the processing in an auto-regulatory manner. Moreover, two putative small RNAs are generated from additional processing, degradation, or both of the rimO transcript. These results suggest a role for the bacterial RNA helicase CrhR in RNase E-dependent mRNA processing in Synechocystis and expand the known range of organisms possessing small RNAs derived from processing of mRNA transcripts.

Carbon monoxide (CO) remains the most common cause of human poisoning. The consequences of CO poisoning include cardiac dysfunction, brain injury, and death. CO causes toxicity by binding to hemoglobin and by inhibiting mitochondrial cytochrome c oxidase (CcO), thereby decreasing oxygen delivery and inhibiting oxidative phosphorylation. We have recently developed a CO antidote based on human neuroglobin (Ngb-H64Q-CCC). This molecule enhances clearance of CO from red blood cells in vitro and in vivo. Herein, we tested whether Ngb-H64Q-CCC can also scavenge CO from CcO and attenuate CO-induced inhibition of mitochondrial respiration. Heart tissue from mice exposed to 3% CO exhibited a 42 ± 19% reduction in tissue respiration rate and a 33 ± 38% reduction in CcO activity compared with unexposed mice. Intravenous infusion of Ngb-H64Q-CCC restored respiration rates to that of control mice correlating with higher electron transport chain CcO activity in Ngb-H64Q-CCC–treated compared with PBS-treated, CO-poisoned mice. Further, using a Clark-type oxygen electrode, we measured isolated rat liver mitochondrial respiration in the presence and absence of saturating solutions of CO (160 μm) and nitric oxide (100 μm). Both CO and NO inhibited respiration, and treatment with Ngb-H64Q-CCC (100 and 50 μm, respectively) significantly reversed this inhibition. These results suggest that Ngb-H64Q-CCC mitigates CO toxicity by scavenging CO from carboxyhemoglobin, improving systemic oxygen delivery and reversing the inhibitory effects of CO on mitochondria. We conclude that Ngb-H64Q-CCC or other CO scavengers demonstrate potential as antidotes that reverse the clinical and molecular effects of CO poisoning.

Endorepellin, the C-terminal fragment of the heparan sulfate proteoglycan perlecan, influences various signaling pathways in endothelial cells by binding to VEGFR2. In this study, we discovered that soluble endorepellin activates the canonical stress signaling pathway consisting of PERK, eIF2α, ATF4, and GADD45α. Specifically, endorepellin evoked transient activation of VEGFR2, which, in turn, phosphorylated PERK at Thr980. Subsequently, PERK phosphorylated eIF2α at Ser51, upregulating its downstream effector proteins ATF4 and GADD45α. RNAi-mediated knockdown of PERK or eIF2α abrogated the endorepellin-mediated up-regulation of GADD45α, the ultimate effector protein of this stress signaling cascade. To functionally validate these findings, we utilized an ex vivo model of angiogenesis. Exposure of the aortic rings embedded in 3D fibrillar collagen to recombinant endorepellin for 2–4 h activated PERK and induced GADD45α vis à vis vehicle-treated counterparts. Similar effects were obtained with the established cellular stress inducer tunicamycin. Notably, chronic exposure of aortic rings to endorepellin for 7–9 days markedly suppressed vessel sprouting, an angiostatic effect that was rescued by blocking PERK kinase activity. Our findings unravel a mechanism by which an extracellular matrix protein evokes stress signaling in endothelial cells, which leads to angiostasis.

The plasmas of diabetic or uremic patients and of those receiving peritoneal dialysis treatment have increased levels of the glucose-derived dicarbonyl metabolites like methylglyoxal (MGO), glyoxal (GO), and 3-deoxyglucosone (3-DG). The elevated dicarbonyl levels can contribute to the development of painful neuropathies. Here, we used stimulated immunoreactive Calcitonin Gene–Related Peptide (iCGRP) release as a measure of nociceptor activation, and we found that each dicarbonyl metabolite induces a concentration-, TRPA1-, and Ca2+-dependent iCGRP release. MGO, GO, and 3-DG were about equally potent in the millimolar range. We hypothesized that another dicarbonyl, 3,4-dideoxyglucosone-3-ene (3,4-DGE), which is present in peritoneal dialysis (PD) solutions after heat sterilization, activates nociceptors. We also showed that at body temperatures 3,4-DGE is formed from 3-DG and that concentrations of 3,4-DGE in the micromolar range effectively induced iCGRP release from isolated murine skin. In a novel preparation of the isolated parietal peritoneum PD fluid or 3,4-DGE alone, at concentrations found in PD solutions, stimulated iCGRP release. We also tested whether inflammatory tissue conditions synergize with dicarbonyls to induce iCGRP release from isolated skin. Application of MGO together with bradykinin or prostaglandin E2 resulted in an overadditive effect on iCGRP release, whereas MGO applied at a pH of 5.2 resulted in reduced release, probably due to an MGO-mediated inhibition of transient receptor potential (TRP) V1 receptors. These results indicate that several reactive dicarbonyls activate nociceptors and potentiate inflammatory mediators. Our findings underline the roles of dicarbonyls and TRPA1 receptors in causing pain during diabetes or renal disease.

Manganese (Mn) is an essential micronutrient required for the normal development of many organs, including the brain. Although its roles as a cofactor in several enzymes and in maintaining optimal physiology are well-known, the overall biological functions of Mn are rather poorly understood. Alterations in body Mn status are associated with altered neuronal physiology and cognition in humans, and either overexposure or (more rarely) insufficiency can cause neurological dysfunction. The resultant balancing act can be viewed as a hormetic U-shaped relationship for biological Mn status and optimal brain health, with changes in the brain leading to physiological effects throughout the body and vice versa. This review discusses Mn homeostasis, biomarkers, molecular mechanisms of cellular transport, and neuropathological changes associated with disruptions of Mn homeostasis, especially in its excess, and identifies gaps in our understanding of the molecular and biochemical mechanisms underlying Mn homeostasis and neurotoxicity.

3-Mercaptopyruvate sulfur transferase (MPST) catalyzes the desulfuration of 3-mercaptopyruvate (3-MP) and transfers sulfane sulfur from an enzyme-bound persulfide intermediate to thiophilic acceptors such as thioredoxin and cysteine. Hydrogen sulfide (H2S), a signaling molecule implicated in many physiological processes, can be released from the persulfide product of the MPST reaction. Two splice variants of MPST, differing by 20 amino acids at the N terminus, give rise to the cytosolic MPST1 and mitochondrial MPST2 isoforms. Here, we characterized the poorly-studied MPST1 variant and demonstrated that substitutions in its Ser–His–Asp triad, proposed to serve a general acid–base role, minimally affect catalytic activity. We estimated the 3-MP concentration in murine liver, kidney, and brain tissues, finding that it ranges from 0.4 μmol·kg−1 in brain to 1.4 μmol·kg−1 in kidney. We also show that N-acetylcysteine, a widely-used antioxidant, is a poor substrate for MPST and is unlikely to function as a thiophilic acceptor. Thioredoxin exhibits substrate inhibition, increasing the KM for 3-MP ∼15-fold compared with other sulfur acceptors. Kinetic simulations at physiologically-relevant substrate concentrations predicted that the proportion of sulfur transfer to thioredoxin increases ∼3.5-fold as its concentration decreases from 10 to 1 μm, whereas the total MPST reaction rate increases ∼7-fold. The simulations also predicted that cysteine is a quantitatively-significant sulfane sulfur acceptor, revealing MPST's potential to generate low-molecular-weight persulfides. We conclude that the MPST1 and MPST2 isoforms are kinetically indistinguishable and that thioredoxin modulates the MPST-catalyzed reaction in a physiologically-relevant concentration range.

Sperm head shaping is a key event in spermiogenesis and is tightly controlled via the acrosome–manchette network. Linker of nucleoskeleton and cytoskeleton (LINC) complexes consist of Sad1 and UNC84 domain–containing (SUN) and Klarsicht/ANC-1/Syne-1 homology (KASH) domain proteins and form conserved nuclear envelope bridges implicated in transducing mechanical forces from the manchette to sculpt sperm nuclei into a hook-like shape. However, the role of LINC complexes in sperm head shaping is still poorly understood. Here we assessed the role of SUN3, a testis-specific LINC component harboring a conserved SUN domain, in spermiogenesis. We show that CRISPR/Cas9-generated Sun3 knockout male mice are infertile, displaying drastically reduced sperm counts and a globozoospermia-like phenotype, including a missing, mislocalized, or fragmented acrosome, as well as multiple defects in sperm flagella. Further examination revealed that the sperm head abnormalities are apparent at step 9 and that the sperm nuclei fail to elongate because of the absence of manchette microtubules and perinuclear rings. These observations indicate that Sun3 deletion likely impairs the ability of the LINC complex to transduce the cytoskeletal force to the nuclear envelope, required for sperm head elongation. We also found that SUN3 interacts with SUN4 in mouse testes and that the level of SUN4 proteins is drastically reduced in Sun3-null mice. Altogether, our results indicate that SUN3 is essential for sperm head shaping and male fertility, providing molecular clues regarding the underlying pathology of the globozoospermia-like phenotype.

Kainate and α-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) receptors are two major, closely related receptor subtypes in the glutamate ion channel family. Excessive activities of these receptors have been implicated in a number of central nervous system diseases. Designing potent and selective antagonists of these receptors, especially of kainate receptors, is useful for developing potential treatment strategies for these neurological diseases. Here, we report on two RNA aptamers designed to individually inhibit kainate and AMPA receptors. To improve the biostability of these aptamers, we also chemically modified these aptamers by substituting their 2'-OH group with 2'-fluorine. These 2'-fluoro aptamers, FB9s-b and FB9s-r, were markedly resistant to RNase-catalyzed degradation, with a half-life of ∼5 days in rat cerebrospinal fluid or serum-containing medium. Furthermore, FB9s-r blocked AMPA receptor activity. Aptamer FB9s-b selectively inhibited GluK1 and GluK2 kainate receptor subunits, and also GluK1/GluK5 and GluK2/GluK5 heteromeric kainate receptors with equal potency. This inhibitory profile makes FB9s-b a powerful template for developing tool molecules and drug candidates for treatment of neurological diseases involving excessive activities of the GluK1 and GluK2 subunits.

Triple-negative breast cancer (TNBC) is characterized by its aggressive biology, early metastatic spread, and poor survival outcomes. TNBC lacks expression of the targetable receptors found in other breast cancer subtypes, mandating use of cytotoxic chemotherapy. However, resistance to chemotherapy is a significant problem, encountered in about two-thirds of TNBC patients, and new strategies are needed to mitigate resistance. In this issue of the Journal of Biological Chemistry, Geck et al. report that TNBC cells are highly sensitive to inhibition of the de novo polyamine synthesis pathway and that inhibition of this pathway sensitizes cells to TNBC-relevant chemotherapy, uncovering new opportunities for addressing chemoresistance.

Treatment of patients with triple-negative breast cancer (TNBC) is limited by a lack of effective molecular therapies targeting this disease. Recent studies have identified metabolic alterations in cancer cells that can be targeted to improve responses to standard-of-care chemotherapy regimens. Using MDA-MB-468 and SUM-159PT TNBC cells, along with LC-MS/MS and HPLC metabolomics profiling, we found here that exposure of TNBC cells to the cytotoxic chemotherapy drugs cisplatin and doxorubicin alter arginine and polyamine metabolites. This alteration was because of a reduction in the levels and activity of a rate-limiting polyamine biosynthetic enzyme, ornithine decarboxylase (ODC). Using gene silencing and inhibitor treatments, we determined that the reduction in ODC was mediated by its negative regulator antizyme, targeting ODC to the proteasome for degradation. Treatment with the ODC inhibitor difluoromethylornithine (DFMO) sensitized TNBC cells to chemotherapy, but this was not observed in receptor-positive breast cancer cells. Moreover, TNBC cell lines had greater sensitivity to single-agent DFMO, and ODC levels were elevated in TNBC patient samples. The alterations in polyamine metabolism in response to chemotherapy, as well as DFMO-induced preferential sensitization of TNBC cells to chemotherapy, reported here suggest that ODC may be a targetable metabolic vulnerability in TNBC.

Allostery exploits the conformational dynamics of enzymes by triggering a shift in population ensembles toward functionally distinct conformational or dynamic states. Allostery extensively regulates the activities of key enzymes within biosynthetic pathways to meet metabolic demand for their end products. Here, we have examined a critical enzyme, 3-deoxy-d-arabino-heptulosonate 7-phosphate synthase (DAH7PS), at the gateway to aromatic amino acid biosynthesis in Mycobacterium tuberculosis, which shows extremely complex dynamic allostery: three distinct aromatic amino acids jointly communicate occupancy to the active site via subtle changes in dynamics, enabling exquisite fine-tuning of delivery of these essential metabolites. Furthermore, this allosteric mechanism is co-opted by pathway branchpoint enzyme chorismate mutase upon complex formation. In this study, using statistical coupling analysis, site-directed mutagenesis, isothermal calorimetry, small-angle X-ray scattering, and X-ray crystallography analyses, we have pinpointed a critical node within the complex dynamic communication network responsible for this sophisticated allosteric machinery. Through a facile Gly to Pro substitution, we have altered backbone dynamics, completely severing the allosteric signal yet remarkably, generating a nonallosteric enzyme that retains full catalytic activity. We also identified a second residue of prime importance to the inter-enzyme communication with chorismate mutase. Our results reveal that highly complex dynamic allostery is surprisingly vulnerable and provide further insights into the intimate link between catalysis and allostery.

Differences in REE patterns of calcite from extensional and shear veins of the Sestola Vidiciatico Tectonic Unit in the Northern Apennines suggest variations in fluid source during the seismic cycle in an ancient analogue of a shallow megathrust (T_max c. 100–150°C). In shear veins, a positive Eu anomaly suggests an exotic fluid source, probably hotter than the fault environment. Small-scale extensional veins were derived instead from a local fluid in equilibrium with the fault rocks. Mutually crosscutting relations between two extensional vein sets, parallel and perpendicular to the megathrust, suggest repeated shifting of the ₁ and ₃ stresses during the seismic cycle. This is consistent with: (1) a seismic phase, with brittle failure along the thrust, crystallization of shear veins from an exotic fluid, stress drop and stress rotation; (2) a post-seismic phase, with fault-normal compaction and formation of fault-normal extensional veins fed by local fluids; (3) a reloading phase, where shear stress and pore pressure are gradually restored and fault-parallel extensional veins form, until the thrust fails again. The combination of geochemical and structural analyses in veins from exhumed megathrust analogues represents a promising tool to better understand the interplay between stress state and fluids in modern subduction zones.

Supplementary material: Cathodoluminescence microphotographs, methodological details of the microstructural analysis, microphotographs of the location of analysed spots and a geochemical data table are available at https://doi.org/10.6084/m9.figshare.c.4842165

Thematic collection: This article is part of the Polygenetic mélanges collection available at: https://www.lyellcollection.org/cc/polygenetic-melanges

The authors present results of the first high-resolution deep seismic reflection survey in the Pieniny Klippen Belt (PKB) in Poland. This survey sheds new light on the matter of olistostromes and the mélange character of the PKB. The sedimentary mass-transport deposits represented by olistoliths and olistostromes manifest themselves by different petrophysical parameters of rocks (velocity, density and resistivity) and seismic attributes. Seismic attributes are very effective in the interpretation of the geology of complex mélanges. The authors used selected attributes: low-pass filter, energy, energy gradient, dip-steered median filter, Prewitt filter, Laplacian edge enhancing filter and square root of the energy gradient. These attributes emphasize changes of the seismic image inside mélange zones. The distinguished olistoliths are now inside imbricated thrust structures and they are tectonically rearranged. Polygenetic mélanges in the PKB originated as a result of sedimentary and tectonic processes. The PKB in the investigated area forms several north-vergent thrust sheets belonging to the Złatne and Hulina nappes. Both nappes contain large chaotic, non-reflective olistoliths as well as the smaller mainly high-reflective olistoliths. Olistoliths are arranged parallel to the flysch layering and thrusts. The results presented confirm the postulated two olistostrome belts within the PKB structure.

Thematic collection: This article is part of the Polygenetic mélanges collection available at: https://www.lyellcollection.org/cc/polygenetic-melanges

The progressive development of microfabrics from initial deposition to slump deformation and then a submarine slide was investigated in an active subduction zone using cores recovered during the Integrated Ocean Drilling Program Expedition 333. A Pleistocene–Holocene sequence was recovered at Site C0018A, which was located on a slope basin on the footwall of the megasplay fault in the Nankai Trough, SW Japan. Six mass-transport deposit units intercalated with coherent intervals were recovered from the upper 190 m of the drilled succession. The initial microfabrics in the undeformed hemipelagic sediments were characterized by random and porous fabrics composed predominantly of clay aggregations and connectors. The initial fabrics were cardhouse fabrics, which consist of clay flakes with edge-to-edge (E–E) and/or edge-to-face (E–F) contacts. These initial microfabrics developed into compacted microfabrics, which are random and consolidated fabrics (bookhouse fabrics) that consist of clay flakes with E–F and/or face-to-face (F–F) contacts and develop during burial as a pure shear deformation. During slumping, these fabrics were then deformed under simple shear to become predominantly F–F contacts and form clay chains. Thus, the microfabrics in these submarine slides are a sedimentary mélange that developed locally into a preferred clay orientation with F–F contacts.

Supplementary material: A schematic illustration showing sedimentation processes and fabrics is available at https://doi.org/10.6084/m9.figshare.c.4483385

Thematic collection: This article is part of the Polygenetic mélanges collection available at: https://www.lyellcollection.org/cc/polygenetic-melanges

The Dukla Nappe in the Skrzydlna area exposes two types of mélange reflecting two different phases of basinal and tectonic evolution of the Outer West Carpathian orogen in its Polish sector. The Oligocene-age sedimentary mélange (olistostrome) is related to growth of the accretionary wedge, whereas the Miocene-age diapiric mélange postdates the orogenic thrusting. Textural and structural features of the very coarse-grained sedimentary mélange suggest non-cohesive debris flows and high-density turbidity currents as predominant emplacement mechanisms. Growth strata, associated with progressive unconformities, and facies contrast between the underlying fine-grained unit and the overlying olistostrome reflect a considerable uplift of the source area and rotation of the adjacent part of the basin floor. The olistostrome and the overlying turbidite succession form a retrogressive sequence interpreted as a submarine canyon infill grading to a small submarine fan. The diapiric mélange, injected into the Oligocene-age succession of the Dukla Nappe, contains the Early and Late Cretaceous-age blocks and matrix derived from the underlying Silesian Nappe. The features reflecting diapiric emplacement include matrix proportion increase and block content decrease towards the mélange margins, scaly fabric and shear zones. Both mélanges, interpreted in the past as chaotic bodies, upon detailed examination reveal genesis-related subtle internal organization.

In the Northern Apennine (Italy), the Internal Ligurian Units consist of Middle–Late Jurassic ophiolites covered by thick sedimentary deposits whose top is represented by the Early Paleocene Bocco Shale. This formation is characterized by mass-transport deposits interlayered with thin-bedded siliciclastic turbidites. The sedimentological and structural features of these mass-transport deposits reveal a long-lived history of recycling of heterogeneous material in a subduction setting. This history started with the frontal accretion of a fragment of oceanic crust into an accretionary prism whose lower slope was subsequently affected by tectonic erosion and consequent instability, leading to the production of mass-transport deposits and the transfer of material to the lower plate. These mass-transport deposits were subsequently underthrust and then again transferred to the base of the accretionary prism by coherent underplating, before their exhumation to the surface. The Bocco Shale is thus representative of a subduction setting where both accretionary and erosive events occurred, depending on changing boundary conditions. The reconstructed history for the Bocco Shale indicates that the sedimentary and gravitational processes both at the prism front and on the prism slope, possibly induced by alternating accretion and erosion events, are the most efficient mechanisms of lithological mixing and recycling in subduction margins.

Upper Lutetian–Bartonian sedimentary mélanges, corresponding to ancient mud-rich submarine mass transport deposits, are widely distributed over an area c. 300 km long and tens of kilometres wide along the exhumed outer part of the External Ligurian accretionary wedge in the Northern Apennines. The occurrence of methane-derived carbonate concretions (septarians) in a specific tectonostratigraphic position below these sedimentary mélanges allows us to document the relationships among a significant period of regional-scale slope failure, climate change (the Early and Mid-Eocene Optimum stages), the dissociation of gas hydrates and accretionary tectonics during the Ligurian Tectonic Phase (early–mid-Lutetian). The distribution of septarians at the core of thrust-related anticlines suggests that the dissociation of gas hydrates was triggered by accretionary tectonics rather than climate change. The different ages of slope failure emplacement and the formation of the septarians support the view that the dissociation of gas hydrates was not the most important trigger for slope failure. The latter occurred during a tectonic quiescence stage associated with a regressive depositional trend, and probably minor residual tectonic pulses, which followed the Ligurian Tectonic Phase, favouring the dynamic re-equilibrium of the External Ligurian accretionary wedge. Our findings provide useful information for a better understanding of the factors controlling giant slope failure events in modern accretionary settings, where they may cause tsunamis.

We document that the undifferentiated chaotic Ligurian Units of the Monferrato–Torino Hill sector (MO-TH) at the Alps–Apennines junction consist of three different units that are comparable with the Cassio, Caio and Sporno Units of the External Ligurian Units of the Northern Apennines. Their internal stratigraphy reflects the character of units deposited in an ocean–continent transition (OCT) zone between the northwestern termination of the Ligurian–Piedmont oceanic basin and the thinned passive margin of Adria microcontinent. The inherited wedge-shaped architecture of this OCT, which gradually closed toward the north in the present-day Canavese Zone, controlled the Late Cretaceous–early Eocene flysch deposition at the trench of the External Ligurian accretionary wedge during the oblique subduction. This favoured the formation of an accretionary wedge increasing in thickness and elevation toward the SE, from the MO-TH to the Emilia Northern Apennines. Our results therefore provide significant information on both the palaeogeographical reconstruction of the northwestern termination of the Ligurian–Piedmont oceanic basin and the role played by inherited along-strike variations (stratigraphy, structural architecture and morphology) of OCT zones in controlling subduction–accretionary processes.

Supplementary material: A spreadsheet with X-ray fluorescence spectrometry and inductively coupled plasma mass spectrometry whole-rock major and trace element composition of mantle peridotites, and photomicrographs of mantle peridotites are available at https://doi.org/10.6084/m9.figshare.c.4519643

A significant part of mélanges recognized in exhumed convergent margins around the world has been recently documented to have chiefly originated from masse transport and subsurface remobilization and disruption (i.e. mélanges, from sedimentary and mud–serpentinite diapiric processes and from in situ fluidification–disruption). Tectonic and/or sedimentary processes occurring during subsequent multiple deformational events of convergent margin evolution commonly overprint and significantly rework the primary (sedimentary or diapiric) mélange fabric, forming polygenetic mélanges. This ultimately complicates their distinction from true tectonic mélanges, masking part of the recorded tectono-sedimentary evolution of the associated convergent margin. The contributions gathered in this thematic collection explore with different approaches (from field structural and stratigraphic observations to geophysical analyses) different types of polygenetic mélange, at various scales, around the world. These studies conclude that the understanding of this type of mélange may provide crucial insights for a more detailed interpretation of the evolution of ancient and modern convergent margins, and of processes and mechanisms triggering potential natural hazards (earthquakes and tsunamis). Case studies include the Apennines in the Central Mediterranean region, the Carpathians in Central Europe and the Nankai Prism in Japan.

Thematic collection: This article is part of the ‘Polygenetic mélanges: a glimpse on tectonic sedimentary and diapiric recycling in convergent margins’ collection available at https://www.lyellcollection.org/cc/polygenetic-melanges

The Lower and Middle Ordovician of the Yangtze Platform, China, is characterized by a sedimentary succession dominated by carbonate rocks. Three sections spanning the Nantsinkuan/Lunshan, Fenhsiang, Hunghuayuan, and Dawan/Zitai formations, corresponding to the Tremadocian–Dapingian in age, have been sampled for high-resolution ¹³C chemostratigraphy (542 samples in total). Our new ¹³C data reveal five tie-points with the potential for global correlation: (1) a positive ¹³C excursion in the lower Nantsinkuan Formation within the Tremadocian Rossodus manitouensis Zone; (2) an excursion with two peaks roughly within the late Tremadocian Paltodus ‘deltifer’ Zone; (3) a positive ¹³C shift in the lower Hunghuayuan Formation, within the early Floian Serratognathus diversus Zone; (4) a gradual positive ¹³C shift in the late Floian, ranging from the uppermost S. diversus Zone to the basal Oepikodus evae Zone; (5) a minor negative shift in the lower Dawan/Zitai Formation, within the early Dapingian Baltoniodus triangularis Zone. These excursions are herein used for correlation of the Yangtze Platform strata with successions from South China, North China, the Argentine Precordillera, North America and Baltica. From a palaeogeographical perspective the Gudongkou, Xiangshuidong and Daling sections represent depositional environments along an inner to outer ramp profile. ¹³C data from these sections show successively heavier (higher) ¹³C values with increasing depositional depth. This is interpreted as due to remineralization of organic carbon within the carbonate rocks.

Supplementary material: Carbon and oxygen isotope data are available at: https://doi.org/10.6084/m9.figshare.c.4767080

Laterites preserved on both sides of the Western Ghats Escarpment of Peninsular India have formed by long-term lateritic weathering essentially after India–Seychelles continental break-up following Deccan Traps emplacement (c. 63 myr ago). Supergene manganese ores of the Western Ghats were formed on Late Archean manganese protores. Among Mn oxides composing the ores, cryptomelane (K-rich Mn oxide) was characterized and dated by ⁴⁰Ar/³⁹Ar geochronology. Measured ages complement those previously obtained in other South Indian manganese ores from the hinterland plateau and further document three major weathering periods, c. 53–44, c. 39–22 and c. 14–10 Ma, the last being documented for the first time in India. These periods coincide with global palaeoclimatic proxies and date the lateritic weathering of three successive palaeolandscapes of the Western Ghats that evolved under slow denudation (c. 8 m Ma^–1) over the last 44 myr and were mostly incised during the Neogene (<22 Ma). This indicates that the Western Ghats are a relict of a South Indian plateau preserved at the headwaters of very long east-flowing river systems and above the Western Ghats Escarpment. Topography and denudation history of this landscape do not require Neogene tilt of the Peninsula as recently proposed.

Supplementary material: Full details of field and sample description, methods and analytical data including electron probe microanalyses of cryptomelane, and isotopic analyses and degassing spectra of irradiated cryptomelane grains are available at https://doi.org/10.6084/m9.figshare.c.4726661

In the Central Western Carpathians (CWC), most published paleomagnetic results from Permo-Mesozoic rocks document extensive remagnetizations and come from thin-skinned thrust units that have undergone multistage deformation. We present results from lower Triassic redbeds from the autochthonous cover overlying the basement that carry a primary magnetization. Petromagnetic results indicate that the dominant ferromagnetic carrier is hematite, while magnetic susceptibility and its anisotropy are controlled by both ferromagnetic and paramagnetic minerals. Magnetic fabrics document weak deformation related to Late Cretaceous shortening. The directions of the high unblocking temperature remanence components pass both reversal and fold tests, attesting to their primary nature. Paleomagnetic inclinations are flatter than expected from reference datasets, suggesting small latitudinal separation between the CWC and stable Europe. Paleomagnetic declinations are mostly clustered within individual mountain massifs, implying their tectonic coherence. They show only minor differences between the massifs, indicating a lack of significant vertical-axis tectonic rotations within the studied central parts of the CWC. The paleomagnetic declinations are therefore representative of the whole of the CWC in terms of regional paleogeographic interpretations, and imply moderate counterclockwise rotations (c. 26°) of the region with respect to stable Europe since the Early Triassic.

Mechanical heterogeneity of a sedimentary sequence exerts a primary control on the geometry of fault zones and the proportion of offset accommodated by folding. The Wildensbuch Fault Zone in the Swiss Molasse Basin, with a maximum throw of 40 m, intersects a Mesozoic section containing a thick (120 m) clay-dominated unit (Opalinus Clay) over- and underlain by more competent limestone units. Interpretation of a 3D seismic reflection survey indicates that the fault zone formed by upward propagation of an east–west-trending basement structure, through the Mesozoic section, in response to NE–SW Miocene extension. This configuration formed an array of left-stepping normal fault segments above and below the Opalinus Clay. In cross-section a broad monoclinal fold is observed in the Opalinus Clay. Folding, however, is not ubiquitous and occurs in the Opalinus Clay where fault segments above and below are oblique to one another; where they are parallel the fault passes through the Opalinus Clay with little folding. These observations demonstrate that, even in strongly heterogeneous sequences, here a four-fold difference in both Young's modulus and cohesion between layers, the occurrence of folding may depend on the local relationship between fault geometry and applied stress field rather than rheological properties alone.

The Northern Paraguai Belt, at the SE border of the Amazonian Craton, central Brazil, has been interpreted as a Brasiliano–Pan-African (c. 650–600 Ma) belt with a foreland basin, recording collisional polyphase tectonism and greenschist-facies metamorphism extending from the late Precambrian to the Cambrian–Ordovician. New structural investigations indicate that the older metasedimentary rocks of the Cuiabá Group represent a Tonian–Cryogenian basement assemblage deformed in two contemporaneous fault-bounded structural sub-domains of wrench-dominated (rake <10°) and contraction-dominated (rake ~30–40°) sinistral transpression, with tectonic vergence towards the SE. The younger late Cryogenian to early Cambrian sedimentary rocks lying to the NW of the Cuiabá Group are non-metamorphic and display only pervasive brittle transtension characterized by normal-oblique faults, fractures and forced drag folds with no consistent vergence pattern. Our analyses suggest that an unconformity separates the metasedimentary Cuiabá Group basement of the Northern Paraguai Belt from the unmetamorphosed sedimentary cover. It is proposed that the latter units were deposited during a post-glacial marine transgression (after c. 635 Ma) in a post-collisional basin. The Paraguai Belt basement and its post-collisional sedimentary cover share a number of significant geological similarities with sequences in the Bassarides Belt and Taoudéni Basin in the SW portion of the West African Craton.

The Tabaquito batholith (Frontal Cordillera, western Argentina), is mainly composed of shallowly emplaced granodiorite to minor monzogranite with abundant mafic microgranular enclaves. New sensitive high-resolution ion microprobe U–Pb zircon ages of c. 337 Ma (biotite granodiorite) and c. 284 Ma (mafic dyke) along with previously published geochronological data suggest that a long-lived magmatic system formed through at least two magmatic pulses at c. 337 and c. 322 Ma with later superimposition of Permian magmatism. The Tabaquito granitoids are metaluminous, calc-alkalic and magnesian with I-type affinity. Elevated Th/Nb, Y/Nb and La/Nb ratios along with negative Nb–Ta and positive Pb anomalies are consistent with a continental arc setting. Hf, Nd and Sr isotopic composition of the Tabaquito granitoids suggests that their source could result from mixing of an old felsic crustal component and a juvenile mafic to intermediate component. New geochronological and geochemical data together with published data reveal a continuous arc setting from the Carboniferous to the Permian in Argentina, and important magmatic compositional variations through time and space controlled by episodic fluctuations in the subduction angle of the oceanic plate. Reported and compiled data allow us to infer the continuity of the Carboniferous magmatic arc along the west margin of Gondwana.

Supplementary material: Detailed petrography, analytical methods and data, zircon cathodoluminescence images and supplementary figures are available at https://doi.org/10.6084/m9.figshare.c.4763993

Most British railway embankments were constructed between 120 and 180 years ago without the benefit of modern design and construction methods. This can result in undesirable load-deformation characteristics and consequent disruption to present-day railway operations, for which there is unprecedented demand. Annual rail passenger kilometres have approximately doubled in the last 20 years and freight has increased by 60% over the same period. Whereas elements such as rails or bridges can be refurbished or replaced to meet increasing demand, the same is not usually feasible for embankments. Development of techniques to assess embankment performance risks posed by operational capacity enhancements is therefore of increasing significance to railway geotechnical asset management. The two case studies presented in this paper demonstrate how geospatial analysis and data management techniques may be applied to this challenge at both strategic (regional or national) and tactical (site-specific) scales for embankments incorporating plastic clay fill. The case studies also demonstrate, in a world of ever more abundant data, the growing need for engineering geologists and geotechnical engineers to augment their traditional knowledge with comprehensive data management and geospatial analysis skills, these being essential for modern infrastructure asset management.

Thematic collection: This article is part of the ‘Ground-related risk to transportation infrastructure’ collection available at: https://www.lyellcollection.org/cc/Ground-related-risk-to-transportation-infrastructure

Transportation infrastructure owners manage an array of different asset types such as bridges, road pavements, earthworks and drainage. Currently, most organization management procedures are siloed by asset type; however, there are important interactions between these asset groups that need to be managed in a cross-asset way. Although these interactions are known, there is little or no quantification of these interactions. For the first time, this paper quantifies that 74% of Highways England's earthwork failures are a result of drainage-related problems, either the lack of drainage infrastructure or the poor performance of it. The analysis undertaken is an important first step not only in moving towards more connected asset management planning for earthworks and drainage, but to also provide guidance for other owners of earthwork infrastructure assets to improve their strategic asset management procedures.

Thematic collection: This article is part of the Ground-related risk to transportation infrastructure collection available at https://www.lyellcollection.org/cc/Ground-related-risk-to-transportation-infrastructure

South Africa is a mineral-rich country with a diverse geology and a long history of mining. The rich history of mining activities includes the extraction of coal from the Ecca Group Sediments of the Karoo Supergroup (250 Ma), gold and uranium from the Witwatersrand Supergroup (2900 Ma), as well as platinum, uranium, tin and lead from the layered Bushveld Igneous Complex (BIC) (2150 Ma). The extraction of gold, copper, tin, lead and rare earth minerals also took place in the Archean rocks of Swazium age (3500–3000 Ma). The historical mining records have either not been accurately recorded or have been lost over time. This has resulted in significant geohazard risk during infrastructure development, especially in and around historical mining towns, such as Johannesburg and Ermelo. These geohazard risks require careful appraisal and quantification prior to any infrastructure design or construction.

This case study aims to set out the development aspects of the Multi-Faceted Geophysical Modelling Systems approach, which was used by the South African National Roads Agency SOC Ltd (SANRAL) during an investigation of undermined ground for the historical coal-mining town of Ermelo in South Africa. The N11/N2 ring road was planned to go around Ermelo to ensure mobility between major routes, whilst still maintaining town access.

The systems approach used a combination of airborne geophysics (Versatile Time Domain Electromagnetic System (VTEM^TM) and magnetics), generally used in mining exploration, land-based and borehole geophysics, borehole water testing, and ground-truthing. The approach was continuous and iterative, building on the data at hand and reducing unnecessary investigations while eliminating the possibility of anomalies being missed, as in the case of conventional discrete drilling. The investigation ensured that 100% of the route was comprehensively investigated with a high confidence in the geological and geophysical data, and concomitant mitigation of infrastructure risk.

The Multi-Faceted Geophysical Modelling Systems approach was successfully used to identify a previously unknown 1 x 1 m mining stope cavity at 90 m depth and a 3 x 5 m access tunnel at 24 m depth in a timely and cost-effective manner. Seven reverse-circulation percussion boreholes confirmed the structural integrity of these underground cavities, as well as the structural geology along the centreline. Based on the great success achieved in identifying shallow anomalies, this Multi-Faceted Geophysical Modelling Systems approach is now being considered for field trails on the dolomitic formations and the Wild Coast greenfields road project where there are large historical slumps and many fault lines.

Thematic collection: This article is part of the Ground-related risk to transportation infrastructure collection available at https://www.lyellcollection.org/cc/Ground-related-risk-to-transportation-infrastructure

Strategic geotechnical asset management considers the whole of an organization's earthworks portfolio and is concerned with setting an overall earthworks asset management policy with long-term objectives related to asset performance, safety and condition, and identifying how those objectives can best be met, now and into the future. A risk-based approach is adopted that requires an understanding of the likelihood that any of the earthworks may fail, combined with a knowledge of the consequences should they fail. Procedures are required to identify those earthworks that are most vulnerable to failure under the influence of triggering events, such as extreme weather. The risks are managed through a mix of interventions to reduce the likelihood of failure and mitigations to reduce the impact of failure. Many of the challenges of implementing a strategic earthworks policy have, or are, being met by the main UK transportation infrastructure organizations.

Thematic collection: This article is part of the Ground-related risk to transportation infrastructure collection available at https://www.lyellcollection.org/cc/Ground-related-risk-to-transportation-infrastructure

In spite of the Kozeny–Carman formula having been applied effectively to sands, there is at present no generally accepted explanation for why it is inadequate for clays. The impermeable adsorbed water layer surrounding the soil particles throws further light on the issue. By introducing the pervious void ratio, which accounts for the effective voids that a fluid flows through, a modified Kozeny–Carman formula is presented. The results presented here show that the modified Kozeny–Carman formula predicts fairly well the hydraulic conductivity of clays, especially for fine-grained soils.

The presence of large palaeo-landslides can hinder the construction of railway lines if they cause an alteration of the natural balance of the slope, significantly increasing the cost of the project. During the construction works in a section of the Madrid–Asturias high-speed railway line (Spain), a large-scale hillside instability affected 460 m of the section. The ground movement began 10 months after the start of the excavations and remained active throughout the observation period (2008–2010). Data provided by fieldwork, boreholes and instrumental monitoring have allowed the investigation of the geological units involved, together with the geometry and the kinematics of the mass movement. This landslide involves a Paleozoic basement with an estimated volume of 4 400 000 m³. It shows low displacement rates (<45 mm a^–1) and was accommodated on a single surface of rupture, which reaches more than 60 m depth. The kinematics is favoured by structural and lithological conditions, there being a strong rheological contrast in the lower part of the mobilized ground. This movement is linked to a large palaeo-landslide that was partially reactivated when excavations undermined the lower slopes of the hillside. Technical solutions for the stabilization have already caused an additional cost of 17% over the initial budget.

Loess, a wind-blown silty soil, can be deposited under a variety of moisture conditions, including dry deposition, wet deposition and gravitational settling of aggregations formed in moist air by capillary forces at grain contacts. This experimental study uses single and double oedometer tests to assess the effect of depositional water content on the collapse potential of reconstituted samples of the Langley Silt Member, known as Brickearth, a natural loessic soil. A freefall sample preparation technique was used to mimic loess formation and environmental scanning electron microscopy was used to relate the observed behaviour to sample fabric. The results show that loess deposited at higher water contents has a greater collapse potential, which is shown to be related to its looser, more granular fabric.

This case study aims to identify the cubic capacity and geometry of the geological body of silt–organic sediments in the environment of a former gravel pit situated in a drainless depression of the alluvium of the Čierna voda River. It is located in the well-known geotourism locality of Slnečné Jazera in Senec, in the SW of Slovakia. To identify the body, electrical resistivity tomography was combined with the use of sonar. The research shows that this approach is appropriate for a number of activities that are subjects of engineering-geological investigations. The cubic capacity and geometry of specific aqueous engineering-geological environments must be determined in connection with the need for the management, control, quantification and extraction of selected sedimentary bodies. In addition, the management of sustainable development of reservoirs, sedimentation basins, industrial ponds, settling pits and natural pools for recreation (the subject of the case study) is important to control the limit amounts of sediments in such environments. The results of this study may be applied in analogous engineering-geological conditions. The drainless depression Slnečné Jazera contained a body of silt–organic sediments amounting to 23 000 m³ (41 Olympic-size pools of 25 m x 12.5 m x 1.8 m). The maximum thickness of the bottom sediments was about 6.3 m on the alluvium with an articulated morphology owing to the submerged digging of gravel. The proposed approach improved the control of extraction of the sedimentary body and optimized the engineering-geological conditions in this geotourism locality.

Rock is a material that is affected by wear, and the curvature of the asperities on a rock joint surface increases with the degree of wear after shearing. Based on the Greenwood and Williamson (GW) model, a new model considering the change of asperity curvature is proposed to explain the wear behaviour of rock joints. First, the shear stiffness formula for a joint surface is derived when the asperity curvature is constant, which shows that the shear stiffness increases with increase of asperity curvature. According to the Mohr–Coulomb criterion, the yield position of a single asperity under normal force and tangential friction force is discussed. Then, the critical normal force for a single asperity at a specific friction coefficient is obtained, which shows that the normal force corresponds to the curvature radius of the asperity. A rough surface model with multi-level curvature radius is proposed. With increase of normal force, the higher-order asperities gradually fail and the curvature radius become larger. A specific pressure value excites a specific radius of curvature, and the larger the pressure, the larger the radius of curvature. The relation between the normal force and the curvature radius is proposed and a shear stiffness formula considering the change of curvature radius of the asperity is derived. The proposed model is verified on the basis of the published experimental results. The calculation results of the proposed model can reflect the test results well: for a given joint surface, with increase in normal force the joint surface gradually becomes smooth; for different joint surfaces, with increase in roughness, the joint surface is more easily smoothed.

This paper uses a 3D model for stability assessment of Zhujiabaobao waste dump with ground cracks. The study data were gathered via reconnaissance, geomorphological analysis and laboratory experiment. A 3D finite extended element method model that can consider cracks was then used to calculate the factor of safety (FOS) of the waste dump via the strength reduction technique. The simulation shows the dump to have an FOS of 1.22 and both the position and depth of penetration of cracks in the waste dump have a crucial impact on the stability of the slope. Because the study area is located in a seismically active area, simulation and analysis of the dynamic response of the waste dump under different magnitudes of seismic waves (peak acceleration is 0.05, 0.15, 0.25 and 0.45g) were performed via an explicit dynamic model. The simulation shows that high steps in the slope are particularly responsive to earthquakes. The approach used here for analysing stability under static and dynamic loads is useful for hazard prevention and mitigation.

The decline or drying up of groundwater sources near a tunnel route is damaging to groundwater users. Therefore, forecasting the impact of a tunnel on nearby groundwater sources is a challenging task in tunnel design. In this study, numerical and analytical approaches were applied to the Qomroud water conveyance tunnel (located in Lorestan province, Iran) to assess the impact of tunnelling on the nearby extraction water wells. Using simulation of groundwater-level fluctuation owing to tunnelling, the drawdown at the well locations was determined. From the drawdowns and using Dupuit's equation, the depletion of well flow rates after tunnelling was estimated. To evaluate the results, observed well flow rates before and after tunnelling were compared with the predicted flow rates. The observed and estimated water well flows (before and after tunnelling) showed a regression factor of 0.64, pointing to satisfactory results