Cadence Protium prototyping platforms rapidly bring up an SoC or system prototype and provide a pre-silicon platform for early software development, SoC verification, system validation, and hardware regressions. In this Training W ebinar, we will explore debugging using Save/Restart on Protium X2 . This feature saves execution time and lets you focus on actual debugging. The system state can be saved before the bug appears and restartS directly from there without spending time in initial execution. We’ll cover key concepts and applications, explore Save/Restart performance metrics, and provide examples to help you understand the concepts. Agenda: The key concepts of debugging using save/restart Capabilities, limitations, and performance metrics Some examples to enable and use save/restart on the Protium X2 system Date and Time Thursday, November 7, 2024 07:00 PST San Jose / 10:00 EST New York / 15:00 GMT London / 16:00 CET Munich / 17:00 IST Jerusalem / 20:30 IST Bangalore / 23:00 CST Beijing REGISTER To register for this webinar, sign in with your Cadence Support account (email ID and password) to log in to the Learning and Support System*. Then select Enrol to register for the session. Once registered, you’ll receive a confirmation email containing all login details. A quick reminder: If you haven’t received a registration confirmation within 1 hour of registering, please check your spam folder and ensure your pop-up blockers are off and cookies are enabled. For issues with registration or other inquiries, reach out to eur_training_webinars@cadence.com . Want to See More Webinars? You can find recordings of all past webinars here Like This Topic? Take this opportunity and register for the free online course related to this webinar topic: Protium Introduction Training The course includes slides with audio and downloadable lab exercises designed to emphasize the topics covered in the lecture. There is also a Digital Badge available for the training. Want to share this and other great Cadence learning opportunities with someone else? Tell them to subscribe . Hungry for Training? Choose the Cadence Training Menu that’s right for you. To view our complete training offerings, visit the Cadence Training website . Related Courses Protium Introduction Training Course | Cadence Palladium Introduction Training Course | Cadence Related Blogs Training Insights – A New Free Online Course on the Protium System for Beginner and Advanced Users Training Insights – Palladium Emulation Course for Beginner and Advanced Users Related Training Bytes Protium Flow Steps for Running Design on Protium System ICE and IXCOM mode comparison ICE compile flow IXCOM compile flow PATH settings for using Protium System Please see the course learning maps for a visual representation of courses and course relationships. Regional course catalogs may be viewed here

Allegro X System Capture offers a complete ecosystem for library development. This post introduces the latest DE-HDL Library Development using System Capture course in which you learn how to create different library objects. As a librarian, you often work with numerous libraries. Your tasks include creating or modifying symbols for libraries. To use Allegro X System Capture to create a library, you can follow the steps in the following flowchart: Let’s go through each step in detail. Setting the CDS_SITE Variable Before you start library development for a new project, set the CDS_SITE system environment variable. This step is required to access libraries and other configuration files. Creating a Project in Allegro X System Capture The next step is to create a project in Allegro X System Capture. Adding a Library to the Project Symbol development consists of creating symbol graphics, electrical data, and properties used by different tools in the PCB design flow. To add a library to a project, first create a library in the Libraries pane of the Project e xplorer. Creating Library Symbols The library development process supports the creation of various types of symbols. Creating a Symbol with Multiple Views You can generate multiple views of the same symbol using the Duplicate command. For example, a discrete symbol, such as a resistor, can have multiple views, as shown in the following image: Creating a Split Symbol For advanced designs, you often need to create library symbols and break them into multiple sections to support the design process. When a symbol shows all the logical pins in the physical package, it is called a single-section or flat symbol. Many large ICs have several pins and the symbols need to fit on a single schematic page. One workaround is to use vector pin names on a symbol to reduce its size, although manufacturers prefer schematics that show each pin. You can divide these high-pin count devices into smaller pieces, where each piece is a separate version of the part. Such parts are referred to as split parts or multi-section symbols. For multi-section symbols, you can create two types of split parts—symmetrical and asymmetrical. Symmetrical Split Symbols A symmetrical split symbol has only one symbol graphic, which holds two or more identical logic symbols, each with its own unique physical pin numbers. You can create a symmetrical split symbol using the Duplicate Section icon in the canvas window. Each symbol section contains the same set of pins but different pin numbers, as shown in the following image: Asymmetrical Split Symbols An asymmetrical split symbol is a symbol whose physical package contains one or more unique schematic symbols. You can create an asymmetrical split symbol by clicking the New Section icon in the canvas window. Asymmetrical symbols have a unique set of logical pins, as shown in the following image: Creating Symbols Using the Spreadsheet Interface To simplify the development of large symbols, Allegro X System Capture has a Spreadsheet Interface . You can copy from a spreadsheet into the interface. This saves time and helps minimize errors introduced by manual entry. In conclusion, the DE-HDL library development using Allegro X System Capture course involves several critical steps and supports various symbol creation techniques. This course helps librarians create and modify symbols effortlessly and deepens their understanding of library development within Allegro X System Capture. To learn more about this topic, enroll in the DE-HDL Library Development using Allegro X System Capture course on the Cadence Support portal . Click the training byte link now or visit Cadence Support and search for training bytes under Video Library. If you find the post useful and want to delve deeper into training details, enroll in the following online training course for lab instructions and a downloadable design: DE-HDL Library Development using Allegro X System Capture (Online). You can become Cadence Certified once you complete the course. Cadence Training Services now offers free Digital Badges for all popular online training courses. These badges indicate proficiency in a certain technology or skill and give you a way to validate your expertise to managers and potential employers. You can add the digital badge to your email signature or any social media channels, such as Facebook or LinkedIn, to highlight your expertise. To find out more, see the blog post Take a Cadence Masterclass and Get a Badge . You might also be interested in the training Learning Map that guides you through recommended course flows as well as tool experience and knowledge-level training modules. To find information on how to get an account on the Cadence Learning and Support portal, see here . SUBSCRIBE to the Cadence training newsletter to be updated about upcoming training, webinars, and much more. If you have any questions about courses, schedules, online training, blended/virtual live training, or public, or onsite live training, reach out to us at Cadence Training .

As a verification engineer, you’re surely looking for ways to automate the debugging process. Have you developed your own scripts to ease specific debugging steps that tools don’t offer? Working with scripts locally and manually is challenging—so is reusing and organizing them. What if there was a way to create your own app with the required functionality and register it with the tool? The answer to that question is “Yes!” The Verisium Debug Python App Store lets you instantly add additional features and capabilities to your Verisium Debug Application using Python Apps that interact with Verisium Debug via the Python API. Join me, Principal Education Application Engineer Bhairava Prasad, for this Training Webinar and discover the Verisium Debug Python App Store. The app store allows you to search for existing apps, learn about them, install or uninstall them, and even customize existing apps. Date and Time Wednesday, November 20, 2024 07:00 PST San Jose / 10:00 EST New York / 15:00 GMT London / 16:00 CET Munich / 17:00 IST Jerusalem / 20:30 IST Bangalore / 23:00 CST Beijing REGISTER To register for this webinar, sign in with your Cadence Support account (email ID and password) to log in to the Learning and Support System*. Then select Enroll to register for the session. Once registered, you’ll receive a confirmation email containing all login details. A quick reminder: If you haven’t received a registration confirmation within one hour of registering, please check your spam folder and ensure your pop-up blockers are off and cookies are enabled. For issues with registration or other inquiries, reach out to eur_training_webinars@cadence.com . Like this topic? Take this opportunity and register for the free online course related to this webinar topic: Verisium Debug Training To view our complete training offerings, visit the Cadence Training website Want to share this and other great Cadence learning opportunities with someone else? Tell them to subscribe . Hungry for Training? Choose the Cadence Training Menu that’s right for you. Related Courses Xcelium Simulator Training Course | Cadence Related Blogs Unveiling the Capabilities of Verisium Manager for Optimized Operations - Verification - Cadence Blogs - Cadence Community Verisium SimAI: SoC Verification with Unprecedented Coverage Maximization - Corporate News - Cadence Blogs - Cadence Community Verisium SimAI: Maximizing Coverage, Minimizing Bugs, Unlocking Peak Throughput - Verification - Cadence Blogs - Cadence Community Related Training Bytes Introducing Verisium Debug (Video) (cadence.com) Introduction to UVM Debug of Verisium Debug (Video) (cadence.com) Verisium Debug Customized Apps with Python API Please see course learning maps a visual representation of courses and course relationships. Regional course catalogs may be viewed here . *If you don’t have a Cadence Support account, go to Cadence User Registration and complete the requested information. Or visit Registration Help .

Hearing is one of the most essential senses for engaging with the world. It enables us to converse, appreciate music, and remain alert to our surroundings. Hearing loss is a prevalent issue affecting millions of individuals globally and disconnecting them from a world where sound is vital to others and the environment. The World Health Organization (WHO) reports that over 5% of the global population requires hearing rehabilitation, a striking statistic highlighting this issue's pervasive nature. Technology has transformed audiology, evolving from simple ear trumpets to sophisticated modern hearing aids. This advancement began with the invention of the transistor, paving the way for devices that are fully wearable inside or behind the ear. Although hearing aids have been available for many years, historically, access to these critical devices has been insufficient, resulting in numerous individuals lacking the necessary support. However, recent advances in hearing aid technology promise improved acoustic experiences, employing modern techniques like binaural processing and neural networks. These innovations demand sophisticated architecture to balance high memory needs with low power consumption in a user-friendly design. Cadence is at the forefront of this technological evolution, offering tools and IP solutions that enhance the accessibility, efficiency, and impact of hearing aids, paving the way for a more inclusive future. This blog explores how Cadence's advanced DSPs are transforming hearing aid design and making them more accessible, efficient, and impactful. Hearing Aids: A Testament to Human Ingenuity The transition from analo g to digital technology in the late 20th century further transformed hearing aids, offering superior sound quality, customization, and the ability to connect to various electronic devices, thus enhancing the user experience markedly. Today's hearing aids are highly effective, versatile, and nearly invisible, a significant advancement from early attempts to address hearing loss. They also feature advanced noise cancellation and connectivity options, allowing users to integrate seamlessly into the digital world. This progression not only highlights the industry's commitment to improving user experience and accessibility but also offers a glimpse into a future where hearing loss is no longer a barrier. Challenges Despite advancements and sophistication, there are several challenges related to hearing aid design and adoption. Users demand smaller, more discreet devices that don't sacrifice performance. While the shift towards sleeker designs is aesthetically pleasing, it introduces substantial complexities in product design. Designers face the challenges of integrating essential components, such as batteries and peripherals, into increasingly compact spaces. Power consumption remains a critical concern, as these devices must remain operational throughout the day. Leveraging neural networks to enhance the signal-to-noise ratio (SNR) for better quality demands additional memory capacity. Consequently, there is a pressing need for flexible, low-power architectures that incorporate all necessary memory and peripherals without compromising the device’s compact size. Adopting AI for adjusting hearing aid volume to fit an individual's specific auditory requirements is a significant challenge and demands more memory and effort. Besides this, reliability and cost are significant challenges for manufacturers. Cadence's Role in Transforming Hearing Aids In hearing aid development, the capacity to evaluate the energy efficiency of SoCs across different frequencies in real time is crucial. These applications demand cohesive, energy-efficient solutions that can uphold high performance. The Cadence Tensilica HiFi and Fusion F1 DSP family emphasize minimal power usage while providing robust performance, ideally suited for a wide range of audio and voice applications. The Cadence Tensilica HiFi DSP family, a high-performance audio technology with AI acceleration and advanced DSP capability, offers feature-rich audio, speech, and imaging for wearables, automotive, home entertainment, digital assistants, and ASR. The Tensilica HiFi DSP family accelerates innovation with its comprehensive instruction set and supports fixed- and floating-point data types. Simplifying software development, it offers C/C++ programming, an auto-vectorizing compiler, and a rich DSP software library through the Cadence Tensilica Xplorer development environment. With the flexibility to customize and enhance performance through additional instructions and better I/O bandwidth, the Tensilica HiFi and Fusion DSP families offer a robust, low-energy audio solution compatible across an expansive software ecosystem for various applications and devices. Conclusion Technological advancements are driving hearing aid evolution; the future of hearing aids lies in further miniaturization and functionality enhancement. Cadence's ongoing innovations aim to improve signal processing and noise reduction, even in challenging environments. The integration of neural networks promises more apparent sound transmission and greater adaptability. Cadence is working on improving how these devices process signals and reduce noise and has initiated a collaborative venture with distinguished entities like GlobalFoundries (GF), Hoerzentrum Oldenburg gGmbH, and Leibniz University Hannover. This collaboration has borne fruit in the form of the industry's first binaural hearing aid system-on-chip (SoC) prototype, the Smart Hearing Aid Processor ( SmartHeAP ). Learn More Cadence, GlobalFoundries, Hoerzentrum Oldenburg and Leibniz University Hannover Collaborate to Advance Hearing Aid Technology Cadence Extends Battery Life and Improves User Experience for Next-Generation Hearables, Wearables and Always-On Devices Advancing the Future of Hearing Aids with Cadence Bluetooth LE Audio, Hearing Aids, and Mindtree

Celebrated for their unparalleled engineering expertise and pioneering mindset, McLaren stands at the forefront of innovation. Theirs is a story of engineering excellence, a symphony of speed driven by the relentless pursuit of aerodynamic perfection. In 2022, Cadence was named an Official Technology Partner of the McLaren Formula 1 Team. The multi-year partnership between McLaren and Cadence has helped redefine the boundaries of what’s possible in Formula 1 aerodynamics. Shaving off a fraction of a second per lap can make all the difference in a podium finish, and track conditions bring layers of complexity to the design process. That’s where Cadence steps in with Fidelity CFD Software. The Cadence Fidelity CFD software is a comprehensive suite of computational fluid dynamics (CFD) solutions. Access to this solution allows the McLaren F1 team to accelerate their CFD workflow, enabling them to assess designs faster and more precisely. It also allows them to investigate airflows and tackle design projects that require advanced compute power and precision. With Fidelity Flow’s solver capabilities and Python-driven automation, Cadence’s CFD software aids the advancement of aerodynamic simulations that go into McLaren’s F1 cars. With a customized, high-quality, multi-block meshing strategy and optimized workflow, Fidelity CFD makes design exploration more automated, thereby helping establish a strong foundation for McLaren’s future success on the track. Lando Norris, F1 driver for McLaren, said, “As a driver, I saw the impact of every decision made in the design room in every simulation run. The work on aerodynamics directly translates to the confidence I have on track, the grip in every turn, and the speed on every straight. This partnership, this technology, is what will give us the edge. It's not just about battling opponents; it's about mastering the airflow around the car in every driving condition on every track.” If you’re interested in learning more about the importance of CFD in McLaren’s racing success, be sure to attend our upcoming webinar, “CFD and Experimental Aerodynamics in McLaren F1 Engineering.” Christian Schramm, McLaren’s director of advanced projects, and Cadence’s Benjamin Leroy will be the main speakers for the event. Register today to secure your spot! For more insights on the Formula 1 car design process, take a look at the case study, “ McLaren Formula 1 Car Aerodynamics Simulation with Cadence Fidelity CFD Software .” Learn more about how McLaren and Cadence are engineering success . “Designed with Cadence” is a series of videos that showcases creative products and technologies that are accelerating industry innovation using Cadence tools and solutions. For more Designed with Cadence videos, check out the Cadence website and YouTube channel .

Each November, we are reminded of the bravery and dedication of those who have served our country. At Cadence, we thank our Veteran employees for their patriotism by reaffirming our commitment to honoring their sacrifices and recognizing their contributions to our business success. Our diverse and inclusive culture is strengthened by the unique perspective of our Veteran employees, and we are proud to support the Veterans Inclusion Group as a space for community members and their allies to connect. In celebration of Veterans Day, we were excited to catch up with Johnathan Edmonds, Veterans Inclusion Group Lead and Design Engineering Director, for a heartfelt chat on his journey through military service to leadership within Cadence. Throughout the conversation, he shared the importance of creating space for Veterans, the skills they offer, and his aspirations for what the Veterans Inclusion Group will achieve in the years ahead. Oh yeah, and he flies planes, too! Join us as we dive into what makes this holiday special for so many across the nation and how we can respectfully commemorate it together. Johnathan, you’re a retired Air Force Reservist, pilot, and now a Design Engineering Director. Can you tell us about your journey from the military to your current role at Cadence? I started my military and electronics journey in the Navy. I enlisted at 18 and served for six years as an aviation electronics technician. During this time, I was able to learn about and repair electronics on planes. This set me up for success, and when I was honorably discharged, I attended Virginia Tech to study computer engineering. Once I graduated, I continued my career as an engineer, but I still wanted to be a military pilot. From my past experience, I knew the reserves were an option where I could learn to fly and still have a civilian career. Not only was I lucky enough to get selected to go to pilot training, but after I returned from flight school, my luck grew, and I was hired at Cadence. Cadence has supported me throughout my military career, which has been a great benefit, as many companies don’t support reservists. The best thing about serving and being employed at Cadence is how I could blend my skill sets to further the Air Force’s mission and achieve great things in engineering. As the first lead of Cadence’s Veterans Inclusion Group, you played an integral part in growing our culture and building community at the company since launching the group four years ago. What inspired you to take on the role of Inclusion Group Lead? I was inspired by three things: camaraderie, service, and outreach. I wanted to see if we could achieve a similar sense of community through the Veterans Inclusion Group as we had during our service life. I also wanted to see how we could better serve our Veterans here at Cadence. I wanted to explore any benefits that could be expanded, roles that could be developed by Vets, and, lastly, I wanted to serve a broader community. COVID-19 put a damper on some of the community support, but we are getting back on track with Veteran employment programs and volunteer efforts like Carry the Load and Gold Star Families. Why is it important to have this space dedicated to Veteran employees? There are many reasons! Networking, for one, creates a stronger, more unified Cadence culture. Two, Vets face a variety of issues not generally understood by those who have not served, such as PTSD, where to get help for disabilities, how to get an old medical record, etc. As I mentioned, I’m also passionate about connecting Veterans with employment and job opportunities. It is so nice to work for a company that actively recruits Vets. We have our own “language,” if you will, so it’s nice to have a space to talk in the language that we are familiar with. What have been some of your favorite moments leading this group over the past few years? Are there any “wins” that you would like to recognize? We have a lot of wins. Events held during COVID-19 and getting past COVID-19, donating to worthwhile causes, and hosting guest speakers are all fantastic milestones and accomplishments. That said, the biggest win is the hiring of new Veteran employees. Mark Murphy, Corporate VP of Sales Operations, and I have both welcomed Vets to our team during this time, and it is such a joy to watch what someone can do when given the opportunity to succeed in the right environment. As you are set to transition out of the lead role next year, what do you hope to see the Veterans Inclusion Group accomplish next? My hope is that the Veterans Inclusion Group partners with other companies, expanding our reach externally and exploring new opportunities to engage Veterans outside of Cadence. Johnathan (left) speaks on an inclusion group panel, along with David Sallard (center), lead of Cadence's Black Inclusion Group and Sr. Principal Application Engineer; Christina Jamerson (on screen), lead of Cadence's Abilities Inclusion Group and Demand Generation Director; and Dianne Rambke (right), lead of Cadence's Latinx Inclusion Group and Marketing Communications Director. What are the important ways that people can signal inclusion and respectfully honor Veterans at work? What are the most meaningful or impactful actions employees everywhere can take to support Veteran coworkers? I think there is one answer to both questions. I recommend that people engage with their companies’ employee resource groups (ERGs) and have conversations with them. Opening up the lines of communication will lead to new paths in their journeys. What are you looking forward to in 2025, both personally and professionally? In 2025, professionally, I am looking forward to taking mixed-signal systems and verification to another level by including emulation, automatic model generation, and seeing which boundaries we can push in our SerDes and Chiplets products. Personally, I am looking forward to making my SXS street legal so I can drive places without getting a ticket, seeing my children participate in sports, church, and school, and taking my wife on vacation to Europe or somewhere else we can unplug. Learn more about Cadence’s Inclusion Groups, diverse culture, and commitment to belonging.

Hey, is it suitable to post here? I wanted a small yet robust amp for practicing while I travel. I wanted something that would fit in my pocket yet still be loud enough to hear.

Presented here is a amplifier based upon the LM386 Audio Amplifier.

There is a standard circuit in the data sheet that is an excellent place to start.

Materials needed:
1 - HM359 project box
1 - 668-1237 speaker
1 - BS6I battery conn
1 - CP1-3515 stereo jack
1 - SC1316 stereo jack
2 - 450-1742 knob
1 - 679-1856 switch
1- 3mm LED
1 - 10 ohm 1/4W resistor
1 - 10uF ceramic cap
1 - .05 uF ceramic cap
1 - 420 uF electrolytic cap
1 - 8 ohm resistor
2 - 51AADB24 10K pot
1 - HM1252 circuit board
1 - LM386N-4 amplifier

Wire and Solder
Step 1: Prep the enclosure

Careful planning is required the first time you free build a circuit. The circuit board has solder pads but not traces. You will have to use thin wire to make the connections for the circuit to work.

Begin by laying out the components on the circuit board that will need to pass through the enclosure. This enclosure has a removable top panel which will be used for the volume, gain and 1/4 inch stereo jack.

Space is limited to check for fit before drilling.

All drilling of the plastic should be done with a step drill bit. This will make the cleanest holes without breaking the plastic.

Lay out the pots a few spaces back but still in line with the desired position. mark the center of each pot shaft then drill with a step drill tot he tightest fitting hole size. Make a center mark between the pot holes then drill for the stereo jack

On the inside of the top cover position and mark where the speaker will go.

Make a template on grid paper the same size as the speaker.

Tape the template to the inside of the cover as shown then use a step bit to drill holes on the center of every square in the grid. This will form the speaker grille. clean up the holes.

Step 2: place the major components

Solder the pots to the circuit board as shown. then place the stereo jack(note in order to get the final fit I had to trim and modify the stereo jack housing a little)

Next, position and solder the switch on the circuit board and mark a space on the top cover that will need to be cut for the switch opening. Use a small file to cut the opening.

Use a sharp knife to bevel the edges of the switch hole to allow for easier operation.

Drill a hole in the side of the upper case for the headphone jack and fasten it in place. ( I had to recess the hole a bit for the retaining nut to grab)

Step 3: Build the circuit

The speaker is held in place by using 2 small brackets that come with the serial cable connector hood. ( I had a bunch around that would never be used)

Refer the the circuit shown from the datasheet and the datasheet for the LM386. The basic circuit only has the volume control while the datasheet shows how to add a gain control across pins 1 and 8 of the amplifier.

The speaker is wired in series with the headphone jack. The headphone jack has internal switches that shut the speaker off when the phones are plugged in.

I chose to use a chip socket for the amplifier which make prototyping easier since you do not have to worry about solder heating as much.

Carefully lay the circuit out on the board and begin wiring components together. I added a second pot and cap in series between pins 1 and 8 of the amp to be able to manually set the gain in addition to volume.

Check you connections with a multimeter before adding the amplifier.

I chose to add a LED indicator for power. This was done by using one side of switch contacts from the battery. The LED is in series with a 220 ohm resistor.

Assemble the case and insert the battery.

Step 4: Final notes

If the speaker is noisy while the headphones work normally, try reversing the speaker connections. If it does not correct the issue, connect a 8 ohm resistor across the speaker contacts.

You may have to place an insulating layer between the speaker and the place where the stereo jack comes through to prevent contact. This will be noted by a loud buzz.

You may have to add some foam in the battery compartment to stop the battery from banging around.

For reference, I've also read an article about amplifiers: http://www.apogeeweb.net/article/60.html

Thanks for reading!
​

Hi,

i am compiling firmware under Windows transfer the binaries and the sources to Linux to simulate/debug there. The problem is that the paths in the DWARF debug info of the .elf file are the absolute Windows paths as set by the compiler so they are useless under Linux. Is it possible to configure mappings of these paths to the Linux paths when simulating/debugging like with e.g. GDB (https://sourceware.org/gdb/current/onlinedocs/gdb/Source-Path.html#index-set-substitute_002dpath)?

thx,

Peter

When the Arduino Mega2560 is added to the first serial port, the dynamic memory is 2000 bytes, and when the second serial serial is added, the dynamic memory is 4000 bytes. Now I need to add the third Serial serial port. The dynamic memory is 6000 bytes. Due to the many variables in the program itself, the dynamic memory is not enough. Please help me how to save the dynamic memory?

Hello,

I'm reading the Design specification for IP6514E.

We will use the DAC mode.

It would seem to be very simple but I don't see any code sequence, i.e.

  1.Write 03(Basic Read) to this register

  2, Write start adress to this register

  3. Write "execute" to this register

  4. Read the data from this register

Thanks,

Stefan

Hi, all.

When I use vavlog to compile verilog rtl, it will recognize IO width mismatch problem as a fatal error.

How to turn the error into warning?

VCS can use -error=noIOPCWM to ingore the error.

Is vavlog has similar arguments?

This is the 22nd installment of The Rationalist, my column for the Times of India.

Trade wars are on the rise, and it’s enough to get any nationalist all het up and excited. Earlier this week, Narendra Modi’s government announced that it would start imposing tariffs on 28 US products starting today. This is a response to similar treatment towards us from the US.

There is one thing I would invite you to consider: Trump and Modi are not engaged in a war with each other. Instead, they are waging war on their own people.

Let’s unpack that a bit. Part of the reason Trump came to power is that he provided simple and wrong answers for people’s problems. He responded to the growing jobs crisis in middle America with two explanations: one, foreigners are coming and taking your jobs; two, your jobs are being shipped overseas.

Both explanations are wrong but intuitive, and they worked for Trump. (He is stupid enough that he probably did not create these narratives for votes but actually believes them.) The first of those leads to the demonising of immigrants. The second leads to a demonising of trade. Trump has acted on his rhetoric after becoming president, and a modern US version of our old ‘Indira is India’ slogan might well be, “Trump is Tariff. Tariff is Trump.”

Contrary to the fulminations of the economically illiterate, all tariffs are bad, without exception. Let me illustrate this with an example. Say there is a fictional product called Brump. A local Brump costs Rs 100. Foreign manufacturers appear and offer better Brumps at a cheaper price, say Rs 90. Consumers shift to foreign Brumps.

Manufacturers of local Brumps get angry, and form an interest group. They lobby the government – or bribe it with campaign contributions – to impose a tariff on import of Brumps. The government puts a 20-rupee tariff. The foreign Brumps now cost Rs 110, and people start buying local Brumps again. This is a good thing, right? Local businesses have been helped, and local jobs have been saved.

But this is only the seen effect. The unseen effect of this tariff is that millions of Brump buyers would have saved Rs 10-per-Brump if there were no tariffs. This money would have gone out into the economy, been part of new demand, generated more jobs. Everyone would have been better off, and the overall standard of living would have been higher.

That brings to me to an essential truth about tariffs. Every tariff is a tax on your own people. And every intervention in markets amounts to a distribution of wealth from the people at large to specific interest groups. (In other words, from the poor to the rich.) The costs of this are dispersed and invisible – what is Rs 10 to any of us? – and the benefits are large and worth fighting for: Local manufacturers of Brumps can make crores extra. Much modern politics amounts to manufacturers of Brumps buying politicians to redistribute money from us to them.

There are second-order effects of protectionism as well. When the US imposes tariffs on other countries, those countries may respond by imposing tariffs back. Raw materials for many goods made locally are imported, and as these become expensive, so do those goods. That quintessential American product, the iPhone, uses parts from 43 countries. As local products rise in price because of expensive foreign parts, prices rise, demand goes down, jobs are lost, and everyone is worse off.

Trump keeps talking about how he wants to ‘win’ at trade, but trade is not a zero-sum game. The most misunderstood term in our times is probably ‘trade-deficit’. A country has a trade deficit when it imports more than what it exports, and Trump thinks of that as a bad thing. It is not. I run a trade deficit with my domestic help and my local grocery store. I buy more from them than they do from me. That is fine, because we all benefit. It is a win-win game.

Similarly, trade between countries is really trade between the people of both countries – and people trade with each other because they are both better off. To interfere in that process is to reduce the value created in their lives. It is immoral. To modify a slogan often identified with libertarians like me, ‘Tariffs are Theft.’

These trade wars, thus, carry a touch of the absurd. Any leader who imposes tariffs is imposing a tax on his own people. Just see the chain of events: Trump taxes the American people. In retaliation, Modi taxes the Indian people. Trump raises taxes. Modi raises taxes. Nationalists in both countries cheer. Interests groups in both countries laugh their way to the bank.

What kind of idiocy is this? How long will this lose-lose game continue?

The India Uncut Blog © 2010 Amit Varma. All rights reserved.
Follow me on Twitter.

This is the 23rd installment of The Rationalist, my column for the Times of India.

I had a strange dream last night. I dreamt that the government had passed a law that made using laptops illegal. I would have to write this column by hand. I would also have to leave my home in Mumbai to deliver it in person to my editor in Delhi. I woke up trembling and angry – and realised how Indian farmers feel every single day of their lives.

My column today is a tale of two satyagrahas. Both involve farmers, technology and the freedom of choice. One of them began this month – but first, let us go back to the turn of the millennium.

As the 1990s came to an end, cotton farmers across India were in distress. Pests known as bollworms were ravaging crops across the country. Farmers had to use increasing amounts of pesticide to keep them at bay. The costs of the pesticide and the amount of labour involved made it unviable – and often, the crops would fail anyway.

Then, technology came to the rescue. The farmers heard of Bt Cotton, a genetically modified type of cotton that kept these pests away, and was being used around the world. But they were illegal in India, even though no bad effects had ever been recorded. Well, who cares about ‘illegal’ when it is a matter of life and death?

Farmers in Gujarat got hold of Bt Cotton seeds from the black market and planted them. You’ll never guess what happened next. As 2002 began, all cotton crops in Gujarat failed – except the 10,000 hectares that had Bt Cotton. The government did not care about the failed crops. They cared about the ‘illegal’ ones. They ordered all the Bt Cotton crops to be destroyed.

It was time for a satyagraha – and not just in Gujarat. The late Sharad Joshi, leader of the Shetkari Sanghatana in Maharashtra, took around 10,000 farmers to Gujarat to stand with their fellows there. They sat in the fields of Bt Cotton and basically said, ‘Over our dead bodies.’ ¬Joshi’s point was simple: all other citizens of India have access to the latest technology from all over. They are all empowered with choice. Why should farmers be held back?

The satyagraha was successful. The ban on Bt Cotton was lifted.

There are three things I would like to point out here. One, the lifting of the ban transformed cotton farming in India. Over 90% of Indian farmers now use Bt Cotton. India has become the world’s largest producer of cotton, moving ahead of China. According to agriculture expert Ashok Gulati, India has gained US$ 67 billion in the years since from higher exports and import savings because of Bt Cotton. Most importantly, cotton farmers’ incomes have doubled.

Two, GMO crops have become standard across the world. Around 190 million hectares of GMO crops have been planted worldwide, and GMO foods are accepted in 67 countries. The humanitarian benefits have been massive: Golden Rice, a variety of rice packed with minerals and vitamins, has prevented blindness in countless new-born kids since it was introduced in the Philippines.

Three, despite the fear-mongering of some NGOs, whose existence depends on alarmism, the science behind GMO is settled. No harmful side effects have been noted in all these years, and millions of lives impacted positively. A couple of years ago, over 100 Nobel Laureates signed a petition asserting that GMO foods were safe, and blasting anti-science NGOs that stood in the way of progress. There is scientific consensus on this.

The science may be settled, but the politics is not. The government still bans some types of GMO seeds, such as Bt Brinjal, which was developed by an Indian company called Mahyco, and used successfully in Bangladesh. More crucially, a variety called HT Bt Cotton, which fights weeds, is also banned. Weeding takes up to 15% of a farmer’s time, and often makes farming unviable. Farmers across the world use this variant – 60% of global cotton crops are HT Bt. Indian farmers are so desperate for it that they choose to break the law and buy expensive seeds from the black market – but the government is cracking down. A farmer in Haryana had his crop destroyed by the government in May.

On June 10 this year, a farmer named Lalit Bahale in the Akola District of Maharashtra kicked off a satyagraha by planting banned seeds of HT Bt Cotton and Bt Brinjal. He was soon joined by thousands of farmers. Far from our urban eyes, a heroic fight has begun. Our farmers, already victimised and oppressed by a predatory government in countless ways, are fighting for their right to take charge of their lives.

As this brave struggle unfolds, I am left with a troubling question: All those satyagrahas of the past by our great freedom fighters, what were they for, if all they got us was independence and not freedom?

The India Uncut Blog © 2010 Amit Varma. All rights reserved.
Follow me on Twitter.

Read on to know about the Operating Point Parameters Summary window that gives you a one-stop view of the categorized and tabulated details on all operating point parameters in your design. This window improves your review cycle with its many benefits.(read more)

During a mixed-signal simulation, the analog engine usually dominates the simulation time and resources. If you need to run only the analog engine in several windows, or if you would like to to run multiple tests of the same circuit with different stimuli or test pattern, then you need to run the simulation multiple times. View this blog to know more about the the two advanced technologies that Spectre AMS Designer provides to help you improve the efficiency of your mixed-signal designs and to increase the simulation speed.(read more)

Read this blog to know how you can easily create and insert connect modules using Spectre AMS Designer with the Verilog-AMS standard language defined by Accellera. (read more)

Read this blog to know more about the innovation behind Universal Connect Modules (UCM).(read more)

Welcome back to the Doc Assistant A-Z blog series!

Since the launch of Doc Assistant, we've been gathering feedback and input from our customers regarding their experiences with our latest documentation viewer. My interaction with Ralf was particularly useful and interesting.

Ralf is a design engineer who works on complex schematics and intricate layouts. For each release, he is challenged with the task of verifying the tool and feature changes across multiple releases. He shared with me that he has been using Doc Assistant’s capabilities to help him achieve this.

Ralf explained that he utilizes Doc Assistant to open and compare documents from different releases side-by-side, seamlessly tracking updates across multiple releases and verifying those updates in his Cadence tools. Additionally, in Doc Assistant’s online mode, he compares documents across previous tool versions, ensuring a thorough review of any changes. Finally, he was happy to share with me that Doc Assistant features have helped him significantly reduce the time he spends on identifying such changes.

You, of course, can also achieve such productivity gains using several Doc Assistant features designed to help simplify such tasks!

In previous editions of this blog series, we looked at some key features and benefits of Doc Assistant. If you've missed these editions, I would highly recommend that you read them:

• Doc Assistant A-Z: Making the Most of the Cadence Cloud-Based Help Viewer: Part 1
• Doc Assistant A-Z: Making the Most of the Cadence Cloud-Based Help Viewer: Part 2
  

In this third installment, we're diving into some more of Doc Assistant's key capabilities.

To learn more about how to use the above features, check out the Doc Assistant User Guide.

These are just a few of the productivity gain features in Doc Assistant. We’ll cover more in the next blog in the series.

Want to Know More?

If you have any feedback on Doc Assistant or would like to request more information or a demo, please contact docassistant.support@cadence.com.

Subscribe to receive email notifications about our latest Custom IC Design blog posts.

Happy reading!

- Priya Sriram, on behalf of the Doc Assistant Team

Hi 

I am looking into chamfering the edge of PCB for Board edge connectors. I have performed fillet command earlier but new to chamfering.

Below is the description :

As seen above, the PCB edge are chamfered in thickness as well as at the corners.

Using OrCAD PCB hotfix S023.

Hello..

I'm updating part in part editor in orcad capture, and I wonder how to align pin numbers using menu or tcl/tk command.

Please, let me know. Thank you.

Hello, I was wondering how can I create variable fields in the layout.

To start, I have a template for some type of designs, and I would like that one of the texts on the silkscreen changes accordingly to an external variable, like the folder name, or a text file in the same folder.

I was thinking something similar to a page frame that changes the date automatically. How can I generate that type of fields?

I'm not able to export a CIS Standard BOM to a Microsoft 365 Excel (business subscription, version 2111).
Selecting the "Export BOM report to Excel" option opens a new Excel window, but OrCAD (17.4-2019 S023) won't fill it with any data...

I tried it on a different PC with Microsoft Office Professional Plus 2019 Excel (strangely the version number is the same: 2111) and with OrCAD 17.4-2019 S016 and it worked flawlessly.

Does anybody experiencing the same issue?
Does the Excel variant, the OrCAD version or the PC itself causing this?
Thanks for any help!

The default position of the pin number is incorrect.

Allegro part of DPI does not support scaling above 150%

I have a small board that is not readable even though the document is 11' x 17'. Is there a way I could expand/magnify the board along with the components on them to make them legible? 
I have created a new film and is displaying the bottom and top side of the board but the board is too small and the components are not legible. Perhaps there is a way to upscale it or expand it?
Please note I have other stuff in the document that I am not showing , notes and other things, and I am trying to make just the boards look bigger in some way.
I do have a PDF image of the same file where the board appears to be MUCH bigger and is fully legible and I am trying to match that.

Thank you all.

When using Shape > Create Bounding Shape on an arc, the outer side works well, but on the inner side it just draws a straight line from the begging to the end of the curve.  Is anyone aware of a fix for this?

I'm attaching  a picture as an example, it works great on lines.

Hi,

I have a question about printing noise summary via maestro output expressions.

How can I print noise data using output expressions, for multiple levels of the hierarchy?

I have found this article which describe the procedure using ocnGenNoiseSummary() function: https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1Od0000007MViHEAW&pageName=ArticleContent

I see also Andrew Beckett referring to the above mentioned article as a solution to a similar question: community.cadence.com/.../noise-summary-per-instance

However, this seems to work only if I'm to extract noise data from a single level of hierarchy.

If I have the output expression "ocnGenNoiseSummary(2 ?result 'hbnoise)", it will generate a "noisesummary" directory under results directory for a hierarchy level of 2.

If I am to extract data from various hierarchy levels, I should be able to generate multiple noise summary directories, such as noisesummary1, noisesummary2 where they correspond to "ocnGenNoiseSummary(1 ?result 'hbnoise)" & "ocnGenNoiseSummary(2 ?result 'hbnoise)", respectively. However this does not seem to be possible.

Can you please advice? Thanks.

My Cadence version: IC23.1-64b.ISR7.27

BR,

Denizhan Karaca

Dear all,

I defined two design variables in ADE Assembler, say V1 and V2, that define the voltage 1 and voltage 2 of a "vpulse" voltage source in my schematic.

Then, I define V1 = 1.0, and V2 = 2.0, run a transient simulation, and everything is as expexcted. The source provides pulses between 1.0 V and 2.0 V.

Next, I set V1 = 1.0:0.5:1.5, thereby creating a parametric sweep with 1.0 V and 1.5 V for V1. I keep V2 at 2.0 V. Then the simulation fails, and all I get is "netl err" in my Output Expressions and an error message that the results directory does not exist and nothing can be plotted: This is reasonable, as the results directory is deleted on starting a new simulation, and as there is no simulation result, none of my output expressions can be plotted.

WARNING (OCN-6040): The specified directory does not exist, or the directory does not contain valid PSF results.
        Ensure that the path to the directory is correct and the directory has a logFile and PSF result files.
WARNING (ADE-1065): No simulation results are available.
ERROR (WIA-1175): Cannot plot waveform signals because no waveform data is available for plotting.
One of the possible reasons can be that 'Save' check box for these signals are not selected in the Outputs Setup pane. Ensure that these check boxes are selected before you run the simulation.

Normally, this kind of para,metric sweep is not a problem, I have done this many times before. There must be something special in THIS PARTICULAR test bench or simulator setup. The trouble is, I don't get any useful error messages.

Does anyone know what might be the problem here OR where to find useful information to investigate further (log files stored somewhere)? Thank you!

Regards,

Volker

P.S. Using Corners instead does not help either. Running it through all values by hand works, though.

Hi, 

When I try to run Monte Carlo it gives me a 3 items message for possible failure:

1. It says the machine selected in the current job setup policy isnot reachable

2. The Cadence hierarchy is not detected, not installed properly. or

3. Job start script (with a path and a name like swiftNetlistService#) is not found on the remote machines.

Any recommendation on how to fix this?

How can I place stacked vias with the size exact same cut width without metals around?
As the red part only in the image below?

Dear community

We would like to have more minimalistic and customized sheet borders for our schematics. I used this guide to create a starting point. Essentially, I made a copy of the US_8ths library and modified the Title symbol to look something like that:

Problem 1

The variable ilInst~>libName points to the library of the sheet border symbols, not to the library of the schematic. How do I need to modify this field in order to see the library name of the schematic where the border is instantiated?

Problem 2

The function CCSgetCreator() was taken from here. This solution does not seem to work with our management toll (we use VersIC); the function always returns nil as value. What is the simplest way to display the name of the user that created the schematic? A custom field that could be filled manually would also do the job for us; it doesn't need to be something that automatically fetches data from a database system.

Thanks for any input.

I want to use PSpice model (download from TI) in Virtuoso , but it can not work. Please help me to check the error message, Thanks

ADE-> Setup-> simulation files->Pspice  Files  /TPS628502-Q1_TRANS.LIB

Parse error before token ']' in expression '[[STEADY_STATE]*0.6]'. If '[[STEADY_STATE]*0.6]'  is a spice expression, quotes are required for the expression.

ERROR(SFE-46): An instance of 'TPS628502-Q1_TRANS'  can have at most 8 terminals (but has 9).

*****************************************************************************
.SUBCKT TPS628502-Q1_TRANS COMP_FSET EN FB GND PG SW SYNC_MODE VIN
+ PARAMS: STEADY_STATE=0
V_U9_V45 U9_N16725824 0 5
E_U9_ABM22 U9_N16725392 0 VALUE { V(FREQ)*1e-12 }
X_U9_U161 U9_N16849713 U9_N16846056 one_shot PARAMS: T=20

I need to include Verilog-A files which live outside the Cadence ecosystem (i.e., they are not in veriloga views but rather are just text files) into a veriloga view. These external modules are not compatible with OA (parametized port widths) so I can't put them into cellviews and hook them together using schematics.

Example: I have a cellview "test" which has a symbol and veriloga view. I have three "externaI" modules mod1 (inside an external file mod1.va),  mod2 (inside an external file mod2.va),  and mod3 (inside an external file mod3.va). I instantiate one instance of each module in "module test". The three modules have some parametized ports which are interconnected by parameterized signals p1 and p2. These two signals are strictly local to the module.

At the bottom of the module I use "`include mod1.va", "`mod2.va", etc.

When I check and save test->veriloga it checks all the included modules as well as the "test" module. However, I get a warning:

Warning from spectre during AHDL compile.
WARNING (VACOMP-1047): The Verilog-A file contains more than one module
definition. ADE can process only one module per Verilog-A file. Put
only one module in each Verilog-A file so that ADE can identify pin
names, directions, and hierarchy within each separate module.

Is this just a SUGGESTION that I can safely ignore, or are my included modules going to be ignored?

Hello,
I'm trying to characterize a full adder that use transmission gate.
Unfortunately, the power calculation are wrong for the cell are always negative.
Is there any method or commands that can can help in power calculation or add the power consumption by the input pins to the power calculation ?
Another question, Is liberate support the characterization or transmission gate cells as standard cells or I should use liberate AMS for these type of cells ?
Thanks in advance,
Tareq 

Hello everyone, 
I have a testbench for generating s2p files from a SP simulation that was working until few months ago. Today I have reopened (w/o making changes that I am aware of) and I get the error as shown below:

first I show the testbench settings:

notice how the s2p generation is disabled: the field "file" is left blank

in the corner I defined some parameters, "filename" is the word that is suppose to generate the name for the s2p. 

where the two variables are defined as follows

And now the output log:

spectre.out file gives the following error:


When clicking on the error message at "9", the input.scs file opens up and the line 9 gets highlighted in green



now, so far I understood that the problem seem to be related tom the "pathcds" variable, but I really don't understand what the error message here means, since I don't see any error in the input.scs file

by the way - if for instance I define the variable "filename" as shown below, then I get no errors:

thanks
Tommaso

Hi

I have a rather strange question - is there a way to tell layout XL to NOT place the error/warning markers on a design when I open a cell?  I do a lot of my layout by using arrays from placed instances and create mosaics that completely ignore the metadata that Layout XL uses with its bindings with schematic (and instances get deleted etc. but I do like using it to generate all my pins etc.) and it's just really annoying when I open a design that I know is LVS clean and since the connectivity metadata is all screwed up (because I did not use it to actually complete the layout) I have a design that's just blinking at me at every gate, source and drain.  I typically delete them at the high level heirarchically but the second I go in and modify something and come back up it places all of them again.  I know that if I flatten all the p cells it goes away but sometimes it's nice to have that piece of metadata but that's about it.  Is there a way to "break" the features of XL like this?  I realize what a weird question this is but it's becoming more of an issue since we moved to IC 23 from IC 6 where there is no longer a layout L that I can use free from these annoyances that can't use any of the connectivity metadata.

Thanks

Chris

I'm completely new to Cadence. I've been able to run a very simple simulation with the -gui option. Simvision opens, I add the variables to the waveform viewer, and press run. All is good.

I don't understand the flow when using the -nogui option. It appears that the simulation runs and returns control to the OS. When I launch Simvision, is there a database or file that I can open to display the already-simulated data?

My command is of the form:

xrun -gui -64bit -sv -access +rwc -top tb_top.sv <src files>

Hi,
I want to parameterized width and length of a NMOS, but it ignore it and I face this error:
*WARNING* Value input must be a number - setting back to previous value.

Does anybody know how I can fix this issue?
Thanks

Hello,

I have a question about toggle coverage.

In my case, there are many unused registers or wires that are affecting the toggle coverage score negatively.

Is it possible to automatically exclude registers or wires that are not used from toggle coverage?

My RTL code is as follows, Is it possible to automatically disable tb.top1.b and tb.top1.c without using an exclude file?

module top1;

  reg a;

  reg b;

  reg [31:0] c;

  initial

  begin

  #1 a=1'b0;

  #1 a=1'b1;

  #1 a=1'b0;

  end

endmodule

module tb;

  top1 top1();

endmodule

> reg [63:0] rMem [0:255] signal

it can be confirmed by rMem [0:255] in Simvision

Is it possible to generate a new rMem1 signal and rMem2 signal by splitting it into 32 bits width through right-click> Create on rMem?

Hi,

Current and valid TCAs for Functional Safety are readily available at the FuSa "one-stop shop".

But I have not been able to find any archive repository for access to the obsoleted versions.

I would need to have also v1.4 of Xcelum TCA to investigate exact changes wrt previous projects.

Anyone knows how to find it?

Best regards,  Lars

Hello,

I have a question I want to create a cover that consists a sparse values, pre-computed (a list or define) for example l = {1; 4; 7; 9; 2048; 700} I'd like to cover that data a (uint(bits:16)) had those values, Any suggestion on how to achieve this, I'd prefer to stay away from macros, and avoid to write a lot of code

struct inst {

  data :uint(bits:16);
  opcode :uint(bits:16);
  !valid_data : list of uint(bits:16) = {0; 12; 10; 700; 890; 293;};
  event data_e;
  event opcode_e;

  cover data_e is {
     item data using radix = HEX, ranges = {
     //I dont want to write all of this
     range([0], "My range1");
     range([10], "My range2");
     //... many values in between
    range([700], "My rangen");
    };

    item opcode;

   cross data, opcode;
};

post_generate() is also {
    emit data_e;
};
};

Hi all, I've trained a device model with the approach of an artificial neural network, and it shows well fit. 

May I know how to transfer the trained model to Verilog-A, so that, we can use this model to do circuit simulation?

And I've searched for some lectures that provide the Verilog-A code in the appendix, but I'm freshman in the field of Verilog-A, 

could anyone tell me each statement? such as

real hlayer-w[0:(NI*NNHL)-1   

Modified version of shr_ram from erm_lib to support mvl_values
regards: snaptube

Using the EMX solver, X-FAB design engineers can efficiently develop next-generation RF technology for the latest communication standards (including sub-6GHz 5G, mmWave, UWB, etc.), which are enabling technologies for communications and electric vehicle (EV) wireless applications. (read more)

With the latest release (Sigrity and Systems Analysis 2022.1 HF2) of Clarity  3D Solver, support for encrypted component models is now available. With this functionality, vendors that supply 3D components, such as connectors, can now merge their...(read more)

If you have seen any images or demonstrations of the 17.4-2019 release, the GUI may look ...(read more)

Cadence Clarity 3D Solver supports encrypted component models! Using this functionality, vendors can supply their 3D components, such as connectors, to end customers without revealing the physical IP of these designs. The first connector vendor to take advantage of this functionality is Japan Aviation Electronics (JAE),(read more)

The silkscreen layer plays a crucial role in the assembly, repair, and testing of a PCB. You can add a variety of information to this layer, such as the location of the components, polarity, component orientation, on-off switches, LEDs, and testpoint...(read more)