Hi everyone, 

Is there any method to generate "Sheet" column for a pin report like table below? The column "Name.Pin" & "Signal" can be generated easily, but I have no idea to generate the column of "Sheet Name".

The software using here are Allegro Design Entry HDL, OrCAD Capture and Allegro PCB Editor. Can these 3 software generate "Sheet Name" data?

Thank you. 

Good morning,
I dug up an old project from 2005 and I should open the schematic to check some things.
This is the schematic of a XILINX XC95108-pq160 CPLD which the XILINX ISE 6.1 software then translated and compiled, to generate a JEDEC file to burn CPLD.

My problem is that I can't open schematics with the versions of Orcad Schematic Entry that I have.
Can anyone help me understand which version of Orcad Schematic Entry I need to install to see these files?

I shared the files on:
drive.google.com/.../view

Thank you very much

Optimize Regression Suite, Accelerate Coverage Closure, and Increase hit count of rare bins using Xcelium Machine Learning. It is easy to use and has no learning curve for existing Xcelium customers. Xcelium Machine Learning Technology helps you discover hidden bugs when used early in your design verification cycle.(read more)

The increase in compute and data-intensive applications and the need for lower power consumption have resulted in a rapidly growing number of Arm-based devices in various market segments; this requires fast time to market (TTM) and support for off-t...(read more)

The rising customer expectations, intermingling fields and high performance needs can be satisfied with the system based design. An intelligent Systems Design strategy can offer a quicker route to an optimum design and helps to increase designers' productivity and analyzes efficiency by providing the ability to explore the entire design space. Cadence Intelligent System Strategy enables a system design revolution and reduces project schedules with optimized continuous integration.(read more)

Explore Impacts of Finite Interconnect Impedance on PDN Characterization

Over the past few decades, many details have been worked out in the power distribution network (PDN) in the frequency and time domains. We have simulation tools that can analyze the physical structure from DC to very high frequencies, including spatial variations of the behavior. We also have frequency- and time-domain test methods to measure the steady-state and transient behavior of the built-up systems.

All of these pieces in our current toolbox have their own assumptions, limitations, and artifacts, and they constantly raise the challenging question that designers need to answer: How to select the design process, simulation, measurement tools, and processes so that we get reasonable answers within a reasonable time frame with a reasonable budget.

Read this award-winning DesignCon 2024 paper titled “Impact of Finite Interconnect Impedance Including Spatial and Domain Comparison of PDN Characterization.” Led by Samtec’s Istvan Novak and written with a team of nine authors from Cadence, Amazon, and Samtec, the paper discusses a series of continually evolving challenges with PDN requirements for cutting-edge designs.

Read the full paper now: “Impact of Finite Interconnect Impedance Including Spatial and Domain Comparison of PDN Characterization.”

Community engagement is a dynamic concept that does not adhere to a singular, universal approach. Its various forms, methods, and objectives can vary significantly depending on the specific context, goals, and desired outcomes. Whether you seek assis...(read more)

Power network design and analysis of 3D-ICs is a major challenge due to the complex nature and large size of the power network. In addition, designers must deal with the complexity of routing power through the interposer, multiple dies, through-silicon vias (TSVs), and through-dielectric vias (TDVs).
Cadence’s Integrity 3D-IC Platform and Voltus IC Power Integrity Solution provide a fully integrated solution for early planning and analysis of 3D-IC power networks, 3D-IC chip-centric power integrity signoff, and hierarchical methods that significantly improve capacity and performance of power integrity (PI) signoff while maintaining a very high level of accuracy at signoff. This blog summarizes the typical design challenges faced by today’s 3D-IC designers, as discussed in our recent webinar, “Addressing 3D-IC Power Integrity Design Challenges.” Please click here to view the full webinar.

Major Trends in Advanced Chip Design

From chips to chiplets, stacked die, 3D-ICs, and more, three major trends are impacting advanced semiconductor packaging design. The first is heterogenous integration, which we define as a disaggregated approach to designing systems on chip (SoCs) from multiple chiplets. This approach is similar to system-in-package (SiP) design, except that instead of integrating multiple bare die – including 3D stacking – on a single substrate, multiple IPs are integrated in the form of chiplets on a single substrate.

The second major trend is around new silicon manufacturing techniques that leverage silicon vias (TSVs) and high-density fanout RDL. These advancements mean that silicon is becoming a more attractive material for packaging, especially when high bandwidth and form factor become key attributes in the end design. This brings new design and verification challenges to most packaging engineers who typically work with organic and ceramic substrate materials.

Finally, on the ecosystem side, all the large semiconductor foundries now offer their own versions of advanced packaging. This brings new ways of supporting design teams with technologies like reference flows and PDKs, concepts that have typically been lacking in the packaging community. Cadence has worked with many of the leading foundries and outsourced semiconductor assembly and test facilities (OSATs) to develop multi-chip(let) packaging reference flows and package assembly design kits. The downside is that, with the time restrictions designers are under today, there isn’t enough time to simulate the details of these flows and PDKs further.

For those who must make the best electro/thermal/physical decisions to achieve the best power/performance/area/cost (PPAC), factors can include accurate die size estimations, thermal feasibility, die-to-die interconnect planning, interposer planning (silicon/organic), front-to-front and front-to-back (F2F/F2B) planning, layer stack and electromigration/ IR drop (EMIR)/TSV planning, IO bandwidth feasibility, and system-level architecture selection.

3D-IC Power Network Design and Analysis

The key to success in 3D-IC design is early power integrity planning and analysis. Cadence’s Integrity 3D-IC platform is a high-capacity 3D-IC platform that enables 3D design planning, implementation, and system analysis in a single, unified cockpit. Cadence’s Voltus IC Power Integrity Solution is a comprehensive full chip electromigration, IR drop, and power analysis solution. With its fully distributed architecture and hierarchical analysis capabilities, Voltus provides very fast analysis and has the capacity to handle the largest designs in the industry. Typically, 3D-IC PDN design and analysis is performed in four phases, as shown in Figure 1.

Phase 1 - Perform early power delivery network (PDN) exploration with each fabric’s PDN cascaded in system PI with early circuit models.

Phase 2 – Plan 3D-IC PDNs in Cadence’s Integrity 3D-IC platform, including micro bumps, TSVs, and through dielectric vias (TDVs), power grid synthesis for dies, and early rail analysis and optimization.

Phase 3 – Perform full chip-centric signoff in Voltus with detailed die, interposer, and package models, including chip die models, while keeping some dies flat.

Phase 4 – Perform full system-level signoff with Cadence’s Sigrity SystemPI using detailed extracted package models from Sigrity XtractIM, board models from Sigrity PowerSI or Clarity 3D Solver, interposer models from XtractIM or Voltus, and chip power models from Voltus.

Figure 1. 3D-IC PDN design and analysis phases

3D-IC Chip-Centric Signoff

The integration of Integrity 3D-IC and Voltus enables chip-centric early analysis and signoff. Figure 2 and Figure 3 highlight the chip centric early PI optimization and signoff flows. In early analysis, the on-chip power networks are synthesized, and the micro bumps and TSVs can be placed and optimized. In the signoff stage, all the detailed design data is used for power analysis, and detailed models are extracted and used for package, interposer, and on-die power networks.

Figure 2. Early chip-centric PI analysis and optimization flow

Figure 3. Chip-centric 3D-IC PI signoff

Hierarchical 3D-IC PI Analysis

To improve the capacity and performance of 3D-IC PI analysis, Voltus enables hierarchical analysis using chiplet models. Chiplet models can be reduced chip models in spice format or more accurate xPGV models which are highly accurate proprietary models generated by Voltus. With xPGV models, the hierarchical PI analysis has almost the same accuracy as flat analysis but offers 10X or higher benefit in runtime and memory requirements.

Conclusion

This blog has highlighted the major design trends enabled by advanced 3D packaging and the design challenges arising from these advancements. The design of power delivery networks is one of these major challenges. We have discussed Cadence solutions to overcome this PI challenge. To learn more, view our recent webinar, "Addressing 3D-IC Power Integrity Design Challenges" and visit the Voltus web page.

When it comes to system integration, PCB designers need to collaborate with the signal analysis or integrity team to run pre-route or post-route analysis and modify constraints, floorplan, or topology based on the results. Allegro PCB Edito...(read more)

The OrCAD X and Allegro X 24.1 release is now available at Cadence Downloads. This blog post provides links to access the release and describes some major changes and new features.   OrCAD X /Allegro X 24.1 (SPB241) Here is a representative li...(read more)

Live Doc is an advanced automated PCB documentation generation tool integrated with OrCAD X Presto designed to streamline the creation of PCB documentation. By automating the generation of PCB fabrication and assembly drawings, Live Doc significantly...(read more)

Starting SPB 23.1, in Allegro X PCB Editor and Allegro X Advanced Package Designer, you can align components by using offset mode. Earlier only spacing mode was available.

Follow these steps to Align Components using Offset Mode:

1. Set Application Mode to Placement Edit.
2. Drag the components that need to be aligned and right-click and choose Align Components.
3. Now, in the Options tab, you will notice Spacing Section with Equal Offset. You can equally and individually offset the components by using the +/- buttons for increment or decrement.

Have you ever encountered ERROR(SPMHNI-67) while importing logic? If yes, you might already know that you had to export libraries of the design and make sure that paths (devpath, padpath, and psmpath) include the location of exported files.  

Starting in SPB23.1, if you go to File > Import > Logic/Netlist and click on the Other tab, you will see an option, Reuse device files for existing components. 

After selecting this option, ERROR(SPMHNI-67) will no longer be there in the log file, because the tool will automatically extract device files and seamlessly use them for newly imported data. In other words, SPB_23.1 lets you reuse the device / component definitions already in the design without first having to dump libraries manually. An excellent improvement, don’t you think?  

Starting SPB 23.1, Allegro X APD lets you import/export the symbol and component properties by using Die Text-In/Out wizards. 

Exporting the symbol 

You can export the symbol by using File > Export > Die Text-Out Wizard. 

In the Die Text-Out Wizard window, you can see the newly added options, that is, Component Properties and Symbol Properties. 

This entire information including the properties will be saved in a text file. 

Importing the symbol 

You can import the same text file in Allegro X APD by using Die Text-In Wizard. 

Choose the text file you want to import. 

Symbol properties added in the text file will be visible in the Die Text-In Wizard window. 

By default, a dielectric must separate each pair of conductor layers in the cross-section of a design. In rare cases, this does not represent the real, manufactured substrate.

If your design requires you to have conductor layers that are not separated by a dielectric (such as, for half-etch designs), there is a variable that needs to be set in Allegro X APD. You must set this by enabling the variable icp_allow_adjacent_conductors. This entry, and its location in the User Preferences Editor, are shown in the following image.

The Objects on adjacent conductor layers do not electrically connect together, automatically. A via must be used to establish the inter-layer connections.

When enabling this option, it is recommended to exercise caution because excluding dielectric layers from your cross-section can lead to inaccurate calculations, including the calculations for signal integrity and via heights. It is important that your cross-section accurately reflect the finished product to ensure the most accurate results possible. Any dielectric layers present in the manufactured part need to be in the cross-section for accurate extraction, 3D viewing, and so on.

Let us know your comments on the various designs that would require adjacent conductor layers.

The DBDoctor application checks the database for errors and other problems, and presents a report about them. DBDoctor supports .brd, .mcm, .mdd, .psm, .dra, .pad, .sav, and .scf databases.

DBDoctor can:

• Analyze and fix database problems.
• Eliminate duplicate vias.
• Perform batch design rule checking (DRC).
• Upgrade databases more than one revision old.

To verify the integrity of a drawing database at any time during the design cycle, run DBDoctor at regular intervals but make sure you always run it after completing a design.

You can run DBDoctor to verify work in progress, or from a terminal window outside the layout editor, perhaps to check multiple input designs in batch mode by using wildcards and various switches. You do not have to run the layout editor to use DBDoctor.

To run this from Allegro X APD and Allegro PCB Editor, go to Tools > Database Check.

You can also go to the Start menu and select Cadence PCB Utilities 2023 > PCB DB Doctor 2023.

You can also use the following command to run DBDoctor in batch mode in the system command prompt:

dbdoctor [-check_only] [-drc] [-drc_only] [-shapes][-no_backup] [-outfile <newboardname.brd>]>

Comment below if you want to know more about this command and its integration with SKILL programming!!

The course "Jasper Formal Fundamentals v24.03" introduces formal analysis to those who want to use formal analysis for design or verification. 

To optimally benefit from this course, you must already have sufficient knowledge of the System Verilog assertions to be capable of writing properties for formal verification. Hence, this training provides a module on formal analysis to help cover this essential background. 

In this course, you will learn how to code efficient SVA Properties for formal analysis, understand formal complexity and how to overcome it, and learn the basics of formal coverage.

After completing this course, you will be able to:

• Define reusable, functionally correct SVA properties that are efficient for formal tools. These shall use abstract auxiliary code to simplify descriptions, make code maintenance easier, reduce debug time, and reduce tool-proof runtime.
• Set up, run, and analyze results from formal analysis.
• Identify designs upon which formal is likely to be successful while understanding formal complexity issues and how to identify and overcome them.
• Use a systematic property development process to approach a completely new verification problem.
• Understand the basics of formal coverage.

 The most recently updated release includes new modules on:

• "Basic complexity handling" which discusses the complexity in formal and how to identify and handle them.
• "Complexity reduction methods” which discusses the complexity reduction methods and which is suitable for which type of complexity problem.
• “Coverage in formal” which discusses the basics of coverage in formal verification and how coverage can be used in formal.   

Take this course to learn the basics of formal verification. 

What's Next? 

You can check out the complete training: Jasper Formal Fundamentals. There is a free online version of the training available 24/7 for all customers with a Cadence Learning and Support Portal account. If you are interested in an instructor-led version of the training, please contact Cadence Training. And don't forget to obtain your digital badge after completing the training!

You can also check Jasper University page for more materials on formal analysis and Jasper apps. 

Related Trainings 

Jasper Formal Expert Training Course | Cadence

Verilog Language and Application Training Course | Cadence

SystemVerilog for Design and Verification Training Course | Cadence

SystemVerilog Assertions Training Course | Cadence

Related Training Bytes 

Jasper Formal Property Verification (FPV) App: Basic Usage Demo (Video)

Jasper Formal Methodology playlist

Related Training Blogs

It’s the Digital Era; Why Not Showcase Your Brand Through a Digital Badge!

Training Insights: Introducing the C++ Course for All Your C++ Learning Needs!

Training Insights: Reaching Your Verification Closure Using Verisium Manager

Training Insights - Free Online Courses on Cadence Learning and Support Portal

Cadence PCIe/CXL VIP support for Partial Header Encryption in Integrity and Data Encryption.(read more)

Verisium Debug, the Cadence unified debug platform, offers a variety of debugging capabilities, including RTL debug, UVM testbench debug, UPF debug, and DMS debug. From IP to SoC level debug, the user can take the benefits of the rich debugging features to reduce the time for debug.

Not only the common and advanced debug features, Verisium Debug also provides Python-based interface API, which enables capabilities allowing users to customize functions with Verisium Debug Python API to access from design, waveform databases and add functions to Verisium Debug’s GUI for visualization purposes. With Verisium Debug’s Python API, users can turn repetitive works into automatic programs or reduce efforts to create in-house utilities with well-established infrastructure from Verisium Debug.

Here is an example of how the user uses Python API to create a customized function. Users can write a Python program to extract signals in a specific design scope and report the values of the extracted signals. From Fig 1., you can understand the procedure of the traversal steps.

1. Import Python library in Verisium Debug package.
2. Setup the database for traversal.
3. Search the scope with the hierarchy information in the design DB.
4. Query the signal list and the values of the signals.
5. Print out the results.

Fig 1. Procedure of Verisium Debug Python Program

The result from the Verisium Debug Python App can be used for post-process design checking or fed into other utilities in the design flow.

The concept is very straightforward. With Verisium Debug and the Python API environment enabled, you can easily query any information that is stored in the databases of Verisium Debug. The result can be outputted in text format, or you can also use the API to display the results back to Verisium Debug’s GUI.

The Verisium Debug Python API is an important capability and resource for Verisium Debug users. To make Verisium Debug Python API easier to access, from Verisium Debug 24.10 release, Verisium Debug introduced the new Verisium Debug Python App Store.

Fig 2. Verisium Debug App Store

The Python App Store includes ready-to-use Python App examples with the availabilities of original source code documents, which help the user to understand how to start writing an app that fits their use case.

Fig 3. Example apps in Verisium Debug App Store

The Verisium Debug Python App Store can also be used by a team as an app management system. App creators can share the developed apps across teams within their companies. The in-house created apps will become easy to manage, and engineers can easily access the apps from the central location, which makes it possible for users to see the updated available Verisium Debug Apps from the Verisium Debug App Store.

Check the following videos for more information about Verisium Debug Python API:

Customize Verisium Debug with Python API

Verisium Debug Customized Apps with Python API

The application of real-time data processing or responsiveness is crucial, such as in high-performance computing, data centers, or applications requiring low-latency data transfers. It enables efficient use of PCIe bandwidth and resources by intelligently managing memory write operations based on system dynamics and workload priorities. By effectively leveraging Deferrable Memory Write [DMWr], Devices can achieve optimized performance and responsiveness, aligning with the evolving demands of modern computing applications.

What Is Deferrable Memory Write?

Deferrable Memory Write (DMWr) ECN introduced this new memory transaction type, which was later officially incorporated in PCIe 5.0 to CXL2.0. This enhanced type of memory transaction is Deferrable Memory Write [DMWr], which flows as another type of existing Read/Write memory transaction; the major difference of this Deferrable Memory Write, where the Requester attempts to write to a given location in Memory Space using the non-posted DMWr TLP Type, it Postponing their completion of memory write transactions to improve overall system efficiency and performance, those memory write operation can be delay or deferred until other priority task complete.

The Deferrable Memory Write (DMWr) requires the Completer to return an acknowledgment to the Requester and provides a mechanism for the recipient to defer (temporarily refuse to service) the Request.

DMWr provides a mechanism for Endpoints and hosts to choose to carry out or defer incoming DMWr Requests. This mechanism can be used by Endpoints and Hosts to simplify the design of flow control, reduce latency, and improve throughput. The Deferrable Memory writes TLP format in Figure A.

(Fig A) Deferrable Memory writes TLP format.

Example Scenario

Here's how the DMWr works with a simplified example: Imagine a system with an endpoint device (Device A) and a host CPU (Device B). Device B wants to write data to Device A's memory, but due to varying reasons such as system bus congestion or prioritization of other transactions, Device A can defer the completion of the memory write request. Just follow these steps:

1. Initiation of Memory Write: Device B initiates a memory write transaction to Device A. This involves sending the memory write request along with the data payload over the PCIe physical layer link.
2. Acknowledgment and Deferral: Upon receiving the memory write request, Device A acknowledges the transaction but may decide to defer its completion. Device A sends an acknowledgment (ACK) back to Device B, indicating it has received the data and intends to complete the write operation but not immediately.
3. Deferred Completion: Device A defers the completion of the memory write operation to a later, more opportune time. This deferral allows Device A to prioritize other transactions or optimize the use of system resources, such as memory bandwidth or processor availability.
4. Completion and Response: At a later point, Device A completes the deferred memory write operation and sends a completion indication back to Device B. This completion typically includes any status updates or additional information related to the transaction.

Usage or Importance of DMWr

Deferrable Memory Write usage provides the improvement in the following aspects:

• Reduced Latency: By deferring less critical memory write operations, more critical transactions can be processed with lower latency, improving overall system responsiveness.
• Improved Efficiency: Optimizes the utilization of system resources such as memory bandwidth and CPU cycles, enhancing the efficiency of data transfers within the PCIe architecture.
• Enhanced Performance: Allows devices to manage and prioritize transactions dynamically, potentially increasing overall system throughput and reducing contention.

Challenges in the Implementation of DMWr Transactions

The implementation of deferrable memory writes (DMWr) introduces several advancements and challenges in terms of usage and verification:

1. Timing and Synchronization: DMWr allows transactions to be deferred, complicating timing requirements or completing them within acceptable timing windows to avoid protocol violations. Ensuring proper synchronization between devices becomes critical to prevent data loss or corruption.
2. Protocol Compliance: Verification must ensure compliance with ECN PCIe 6.0 and CXL specifications regarding when and how DMWr transactions can be initiated and completed.
3. Performance Optimization: While DMWr can improve overall system performance by reducing latency, verifying its impact on system performance and ensuring it meets expected benchmarks is crucial.
4. Error Handling: Handling errors related to deferred transactions adds complexity. Verifying error detection and recovery mechanisms under various scenarios (e.g., timeout during deferral) is essential.

Verification Challenges of DMWr Transactions

The challenges to verifying the DMWr transaction consist of all checks with respect to Function, Timing, Protocol compliance, improvement, Error scenario, and security usage on purpose, as well as Data integrity at the PCIe and CXL.

1. Functional Verification: Verifying the correct implementation of DMWr at both ends of the PCIe link (transmitter and receiver) to ensure proper functionality and adherence to specifications.
2. Timing Verification: Validating timing constraints associated with deferring writes and ensuring transactions are completed within specified windows without violating protocol rules.
3. Protocol Compliance Verification: Checking that DMWr transactions adhere to PCIe and CXL protocol rules, including ordering rules and any restrictions on deferral based on the transaction type.
4. Performance Verification: Assessing the impact of DMWr on overall system performance, including latency reduction and bandwidth utilization, through simulation and testing.
5. Error Scenario Verification: Creating and testing scenarios to verify error handling mechanisms related to DMWr, such as timeouts, retries, and recovery procedures.
6. Security Considerations: Assessing potential security vulnerabilities related to DMWr, such as data integrity risks during deferred transactions or exposure to timing-based attacks.

Major verification challenges and approaches are timing and synchronization verification in the context of implementing deferrable memory writes (DMWr), which is crucial due to the inherent complexities introduced by deferred transactions. Here are the key issues and approaches to address them:

Timing and Synchronization Issues

1. Transaction Completion Timing:
   • Issue: Ensuring deferred transactions are completed within the specified time window without violating protocol timing constraints.
   • Approach: Design an internal timer and checker to model worst-case scenarios where transactions are deferred and verify that they are complete within allowable latency limits. This involves simulating various traffic loads and conditions to assess timing under different scenarios.
2. Ordering and Dependencies:
   • Issue: Verifying that transactions deferred using DMWr maintain the correct ordering and dependencies relative to non-deferred transactions.
   • Approach: Implement test scenarios that include mixed traffic of DMWr and non-DMWr transactions. Verify through simulation or emulation that dependencies and ordering requirements are correctly maintained across the PCIe link.
3. Interrupt Handling and Response Times:
   • Issue: Verify the handling of interrupts and ensure timely responses from devices involved in DMWr transactions.
   • Approach: Implement test cases that simulate interrupt generation during DMWr transactions. Measure and verify the response times to interrupts to ensure they meet system latency requirements.

In conclusion, while deferrable memory writes in PCIe and CXL offer significant performance benefits, their implementation and verification present several challenges related to timing, protocol compliance, performance optimization, and error handling. Addressing these challenges requires rigorous testing and testbench of traffic, advanced verification methodologies, and a thorough understanding of PCIe specifications and also the motivation behind introducing this Deferrable Write is effectively used in the CXL further. Outcomes of Deferrable Memory Write verify that the performance benefits of DMWr (reduced latency, improved throughput) are achieved without compromising timing integrity or violating protocol specifications.

In summary, PCIe and CXL are complex protocols with many verification challenges. You must understand many new Spec changes and consider the robust verification plan for the new features and backward compatible tests impacted by new features. Cadence's PCIe 6.0 Verification IP is fully compliant with the latest PCIe Express 6.0 specifications and provides an effective and efficient way to verify the components interfacing with the PCIe 6.0 interface. Cadence VIP for PCIe 6.0 provides exhaustive verification of PCIe-based IP and SoCs, and we are working with Early Adopter customers to speed up every verification stage.

More Information

• For more info on how Cadence PCIe Verification IP and TripleCheck VIP enable users to confidently verify PCIe 6.0, see our VIP for PCI Express, VIP for Compute Express Link, and TripleCheck for PCI Express
• See the PCI-SIG website for more details on PCIe in general and the different PCI standards.

This November, the engineering and simulation community is set to converge in China for an event that promises to be nothing short of revolutionary. The 2024 BETA CAE Systems China Open Meeting, taking place in the vibrant cities of Beijing and Shanghai on November 5 and 7 , respectively, is a must-attend for anyone looking to stay at the forefront of technological innovation in simulation solutions. Prepare to be inspired by Ben Gu , the visionary Corporate VP of Research and Development at Cadence. He will lead both meetings in Beijing and Shanghai with his keynote on " A New Millennium in Multiphysics System Analysis ." This thought-provoking keynote is expected to provide attendees with a glimpse into the future of engineering simulation and analysis. What sets the BETA CAE Systems Open Meetings apart is not just the high caliber of speakers but also the hands-on training sessions designed to enhance your technical expertise with the BETA CAE software suite. Whether you are an inexperienced individual seeking to acquire fundamental knowledge or an accomplished professional endeavoring to hone your expertise, these training sessions following the open meetings are meticulously tailored to meet your needs. Join Us at the BETA CAE Systems Open Meeting in Beijing The BETA CAE Systems Open Meeting in Beijing will feature a keynote speech by Peng Qiao , Senior Engineer at Great Wall Motors Co., Ltd, on Multidisciplinary Optimization Techniques for Automotive Control Arms . ( View detailed agenda for Beijing. ) When: November 5, 2024 Where: Grand Metropark Hotel Beijing If this sounds interesting, register today for the BETA CAE Systems Beijing Open Meeting by clicking the button below. Don't Miss Out on the BETA CAE Systems Open Meeting in Shanghai After the BETA CAE Systems Open Meeting in Beijing, the next meeting in China will be in Shanghai. During this event, Liu Deping, CAE Engineer from Zhejiang Geely Automobile Research Institute Co., Ltd, will deliver a keynote speech on the Application of ANSA in the Simulation Development Cycle . ( View detailed agenda for Shanghai. ) When: November 7, 2024 Where: InterContinental Shanghai Jing'an Following the open meeting on November 7 will be an exclusive training day on November 8. This session will provide attendees with practical experience using the BETA CAE software to improve their technical skills and provide hands-on knowledge of the software. If you find this intriguing, register now for the BETA CAE Systems Shanghai Open Meeting by clicking the button below. Why Attend? Gain firsthand insights into the latest developments in simulation technology Learn from real-world applications and success stories from various industries Connect and exchange ideas with experts in a collaborative environment Mark your calendars for this unparalleled opportunity to explore the forefront of simulation technology. Whether you're aiming to broaden your knowledge, enhance your technical skills, or connect with industry leaders, the BETA CAE Systems Open Meetings are your gateway to the future of engineering. Join us and be part of shaping the next wave of innovation in the simulation world.

Wild River Technology (WRT), the leading supplier of signal integrity measurement and optimization test fixtures for high-speed channels at data rates of up to 224G, has announced the availability of a new advanced channel modeling solution that helps achieve extreme signal integrity design to 70GHz. Read the press release. The CMP-70 program continues the industry-first simulation-to-measurement collaboration with Cadence that was initially established with the CMP-50. Significant resources were dedicated to the development of the CMP-70 by Cadence and WRT over almost three years. The CMP-70 will be on display at DesignCon 2025 , January 28-30, in Cadence booth 827 to benchmark the Cadence Clarity 3D Solver . “I am not a fan of hype-based programs that simply get attention,” remarked Alfred P. Neves, WRT’s co-founder and chief technical officer. “Both Cadence and Wild River brought substantial skills to the table in this project as we continued our industry-first simulation-to-measurement collaboration. The result is a proven, robust and accurate platform that brings extreme signal integrity to 70GHz designs. This application package has also been instrumental in demonstrating the robust 3D EM simulation capability of the Cadence Clarity solver.” “We’re delighted to continue the joint development and validation program with WRT that started with the CMP-50,” said Gary Lytle, product management director at Cadence. “The skilled and experienced signal integrity technologists that both companies bring to the program results in a superior signal integrity solution for our mutual customers.” CMP-70 Solution Features The solution is available both in a standard configuration and as a custom solution for customer-specific stackups and fabrication. The primary target application is to support a 3D EM solver analysis modeling versus the time- and frequency-domain measurement methodologies. The solution features include: The CMP-70 platform, assembled and 100% TDR NIST traceable tested, with custom stands Material Identification overview web-based meeting including anisotropic 3D material identification A cross-section PCB report and structures for using as-fabricated geometries Measured S-parameters, pre-tested for quality (passivity/causality and resampled for time domain simulations) A host of novel crosstalk structures suited for 112G HD level project analysis PCB layout design files (NDA required) An EDA starter library including loss models with industry-first accurate surface roughness models Comprehensive training available for 3D EM analysis – correspondence, material ID in X-Y and Z axis for a host of EDA tools Industry-First Hausdorff Technique The WRT application package also includes an industry-first modified Hausdorff (MHD) technique , included as MATLAB code. This algorithmic approach provides an accurate way to compare two sets of measurements in multi-dimensional space to determine how well they match. The technique is used to compare the results simulated by the Clarity solver with those measured on the CMP-70 platform. The methodology and initial results are shown in the figure below, where the figure of merit (FOM) is calculated from 10, 35, and finally to 50GHz. The MHD algorithm requires a MATLAB license, but WRT also accommodates customer data as another option, where WRT provides the comparison between measured and simulated data. Additional Resources If you are attending DesignCon 2025 , be sure to stop by Cadence booth 827 to see WRT’s CMP-70 advanced channel modeling solution in action with the Clarity 3D Solver. Check out our on-demand webinar, " Validating Clarity 3D Solver Accuracy Through Measurement Correlation ." Learn more about the CMP-70 solution and the Clarity 3D Solver . For more information about Cadence’s full suite of integrated multiphysics simulation solutions, download our Multiphysics System Analysis Solutions Portfolio .

Allegro X System Capture offers a complete ecosystem for library development. This post introduces the latest DE-HDL Library Development using System Capture course in which you learn how to create different library objects. As a librarian, you often work with numerous libraries. Your tasks include creating or modifying symbols for libraries. To use Allegro X System Capture to create a library, you can follow the steps in the following flowchart: Let’s go through each step in detail. Setting the CDS_SITE Variable Before you start library development for a new project, set the CDS_SITE system environment variable. This step is required to access libraries and other configuration files. Creating a Project in Allegro X System Capture The next step is to create a project in Allegro X System Capture. Adding a Library to the Project Symbol development consists of creating symbol graphics, electrical data, and properties used by different tools in the PCB design flow. To add a library to a project, first create a library in the Libraries pane of the Project e xplorer. Creating Library Symbols The library development process supports the creation of various types of symbols. Creating a Symbol with Multiple Views You can generate multiple views of the same symbol using the Duplicate command. For example, a discrete symbol, such as a resistor, can have multiple views, as shown in the following image: Creating a Split Symbol For advanced designs, you often need to create library symbols and break them into multiple sections to support the design process. When a symbol shows all the logical pins in the physical package, it is called a single-section or flat symbol. Many large ICs have several pins and the symbols need to fit on a single schematic page. One workaround is to use vector pin names on a symbol to reduce its size, although manufacturers prefer schematics that show each pin. You can divide these high-pin count devices into smaller pieces, where each piece is a separate version of the part. Such parts are referred to as split parts or multi-section symbols. For multi-section symbols, you can create two types of split parts—symmetrical and asymmetrical. Symmetrical Split Symbols A symmetrical split symbol has only one symbol graphic, which holds two or more identical logic symbols, each with its own unique physical pin numbers. You can create a symmetrical split symbol using the Duplicate Section icon in the canvas window. Each symbol section contains the same set of pins but different pin numbers, as shown in the following image: Asymmetrical Split Symbols An asymmetrical split symbol is a symbol whose physical package contains one or more unique schematic symbols. You can create an asymmetrical split symbol by clicking the New Section icon in the canvas window. Asymmetrical symbols have a unique set of logical pins, as shown in the following image: Creating Symbols Using the Spreadsheet Interface To simplify the development of large symbols, Allegro X System Capture has a Spreadsheet Interface . You can copy from a spreadsheet into the interface. This saves time and helps minimize errors introduced by manual entry. In conclusion, the DE-HDL library development using Allegro X System Capture course involves several critical steps and supports various symbol creation techniques. This course helps librarians create and modify symbols effortlessly and deepens their understanding of library development within Allegro X System Capture. To learn more about this topic, enroll in the DE-HDL Library Development using Allegro X System Capture course on the Cadence Support portal . Click the training byte link now or visit Cadence Support and search for training bytes under Video Library. If you find the post useful and want to delve deeper into training details, enroll in the following online training course for lab instructions and a downloadable design: DE-HDL Library Development using Allegro X System Capture (Online). You can become Cadence Certified once you complete the course. Cadence Training Services now offers free Digital Badges for all popular online training courses. These badges indicate proficiency in a certain technology or skill and give you a way to validate your expertise to managers and potential employers. You can add the digital badge to your email signature or any social media channels, such as Facebook or LinkedIn, to highlight your expertise. To find out more, see the blog post Take a Cadence Masterclass and Get a Badge . You might also be interested in the training Learning Map that guides you through recommended course flows as well as tool experience and knowledge-level training modules. To find information on how to get an account on the Cadence Learning and Support portal, see here . SUBSCRIBE to the Cadence training newsletter to be updated about upcoming training, webinars, and much more. If you have any questions about courses, schedules, online training, blended/virtual live training, or public, or onsite live training, reach out to us at Cadence Training .

This year, the Cadence Giving Foundation (CGF) launched Fem.AI to achieve a more inclusive tech sector, and the inaugural Fem.AI Summit that took place on October 1 was a luminary in a world where technology is evolving at an unprecedented pace. The summit not only excelled in its mission to enlighten, empower, and mobilize stakeholders across various industries on the issue of gender disparity in high tech and AI, but was a celebration of innovation, diversity, and empowerment. As we reflect on the moments that made the summit unforgettable, it's clear that the event was more than just a meeting of minds—it was a movement for change! Shaping Tomorrow Together Cadence’s president and CEO, Anirudh Devgan, stated, “Women’s talent and perspectives are crucial to shaping the future of AI.” Devgan’s words epitomized the driving force behind the first-ever Fem.AI Summit which brought together innovators, educators, business leadership, and investors across industries to create an ecosystem that ensures women can fully participate in the AI revolution and burgeoning AI economy. The energy of pioneers ready to collectively disrupt the status quo filled the air, and as the day-long summit began, it became clear that we were part of something truly groundbreaking. The event's lineup of speakers held discussions that went beyond the technical aspects of AI, emphasizing the vital importance of diversity in technology. Such insights were lent by leading voices from MIT, Stanford, and UC Berkeley, who set the stage for inspiring discussions with speakers like Dr. Joy Buolamwini, Founder of the Algorithmic Justice League, and Reshma Saujani, Founder and CEO of Moms First and Girls Who Code. Included in this lineup of leading figures was Dr. Chelsea Clinton, Vice Chair of the Clinton Foundation, who left us with her hopes for the future of women in AI: “I’m hoping because of company-wide commitments like what we’re experiencing here today thanks to Cadence, that the people who will be part of designing [future technologies] will have a different group of people around the proverbial table or the computer screens doing that… and that women will be more integral into the conceptualization and then the actualization of AI-driven enterprises.” The hopes and visions for women in AI cannot manifest in a vacuum, they must be achieved with the support of individuals and systems from education all the way to the upper echelons of leadership. It is with this understanding, that Fem.AI is committed to investing in women at every stage of their STEM journey. Breaking Barriers It is with this ideal that we were honored to hear from women breaking through barriers of gender, race, and class in achieving pinnacles of success in areas of science and technology. Dr. Sarah H. Chen, Postdoctoral Researcher at Stanford and Thriving Stars Scholar at MIT, Niki Karanikola, Machine Learning Engineer and Break Through Tech AI Scholar at MIT, and Katya Echazarreta, NASA’s first Mexican Astronaut, showcased the resilience and determination that drive progress within and beyond our industry. Through their stories of persevering despite all odds, we were reminded that supporting students in STEM can create generational change with impacts beyond the realms of AI and technology. The final speaker at the Cadence Fem.AI Summit, the trailblazing Brandi Chastain, Founder of Bay FC, World Cup Champion, and Olympic Gold Medalist, left us with a powerful reminder that when faced with this opportunity: “Our purpose needs to be intentional” especially in building the future of technology and AI where “diversity is not something to be afraid of, but something to be embraced.” Echoing this sentiment, summit attendees left the event reminded of the crucial role we collectively play in ensuring women are part of this tech revolution. Moving Forward While the summit may have concluded, its impact will continue through individuals, companies, and communities aspiring to achieve an equitable tech sector. This is just the start, and we must take collective action now. We hope that you will join Cadence to ensure that we clear the path and catalyze women's role in the AI revolution! Meet Our Partners Our partners are making Fem.AI’s vision a reality through their important work advancing women in technology, including fostering STEM excellence in higher education, launching STEM careers, and achieving gender diversity in leadership. Learn more about the important work of each of our partners by visiting their pages: Break Through Tech Last Mile Education Fund Fast Forward Generation VC Include Global Semiconductor Alliance Join the Fem.AI Alliance Joining the Fem.AI Alliance signals that your company or institution is committed to evolving the AI workforce. By increasing the representation of women in AI, we aim to broaden the talent pool and the perspective so that AI represents us all. Through the Fem.AI Alliance, companies and institutions can share best practices, guidance, and inspiration. Since its launch, companies like the Equinix Foundation, NetApp, NVIDIA, Unity Technologies, and Workday have joined the Alliance in their commitment to Fem.AI’s work and mission. Visit Fem.AI to get involved today or contact Fem.AI@cadence.com .

In this edition of the Women in CFD series, we feature Vassiliki Moschou, aka Vicky, senior supervisor at BETA CAE, now part of Cadence. Her career journey serves as an inspiration for anyone who believes that studying in one field and working in another is less desirable. Vicky demonstrates how knowledge gained in one discipline can be effectively applied in another, often providing fresh and intriguing insights. Join us in this conversation to learn more about Vicky, her career path, and her advice for those considering a career in a field different from their studies. Tell us something about yourself. I've lived all my 41 years in the vibrant city of Thessaloniki, Greece. I’m married to my high school sweetheart, and together we're raising two incredible daughters who are 11 and almost 8 years old. These girls are absolutely the center of my world, and every day with them feels like a gift. My entire life, including where I have built my career and family, is deeply rooted in Thessaloniki. It's not just where I am from; it's a big part of who I am. Could you share your educational background and how you first became interested in computational fluid dynamics (CFD)? In 2001, I started my academic journey at the Computer Science Department of Aristotle University of Thessaloniki , where I focused on studying signal processing and artificial intelligence. This field fascinated me, and I pursued a master’s degree in the same area to further my expertise. Concurrently, I was involved in European research programs on signal/audio processing and machine learning methodologies. It became evident early on that my career would revolve around software engineering, a path I was fully prepared to pursue. However, everything took a turn when I joined BETA CAE in 2008. It was there that I was introduced to the field of CFD, which was completely unfamiliar to me at the time. This presented a new challenge that I eagerly accepted. I received support from all my colleagues, but I was primarily mentored by two brilliant and dedicated engineers, Michael Giannakidis and Vangelis Skaperdas , who introduced me to the world of CFD. Over time, what was once an unknown territory for me has become my passion. My journey through CFD has been a significant part of my professional growth. In my 30s, I pursued and completed a PhD in systems physiology in collaboration with the Medical and Computer Science Departments of Aristotle University of Thessaloniki. Our research focused on examining the EGF-activated MAPK pathway (often associated with cancer) from the perspective of complex self-organizing systems. Using graph theory, signal processing, and machine learning, we extracted information from the signals observed in this dynamic, distributed biological system to target novel drug development. What are the different positions you have held within the company, and what responsibilities do you currently hold? I started my career as a junior engineer at BETA CAE (now Cadence). It was a role that plunged me deep into the fascinating worlds of software and CFD, a crucial time of my career filled with learning and growth. My hard work and dedication didn't go unnoticed, and after a few years, I was promoted. That promotion was the first step on a career ladder that I've been ascending ever since. Now, I'm in the position of a senior supervisor. Though my job now involves a wide range of managerial tasks, I'm still deeply passionate about the technical side of things. I love writing code and working through the complexities of our projects, merging my leadership responsibilities with my enthusiasm for the technical facets of our work. What would you be doing if not working in CFD? Had my career taken a different trajectory, I envision myself in a role deeply embedded in human connections—perhaps as the owner of a quaint bakery or a cozy hotel, a teacher, or even venturing into human resources. There's a certain allure in careers that foster direct engagement with people, creating experiences and memories. In fact, I have an inherent desire to connect and communicate with people, aspects that are fundamentally different yet equally fulfilling as my current career. What are some of your favorite pastimes and hobbies? Family is at the center of my leisure time. We love taking short trips to the village, hanging out with our friends, and connecting. Our activities range from solving puzzles in escape rooms to passionately cheering at basketball games, especially since my older daughter has taken up the sport. But beyond these activities, being a mother is my most cherished pastime. The moments I share with my daughters, the lessons we learn together, and the joy we find in everyday adventures are what I hold dear. What are your thoughts on women in technical fields? The landscape for women in technical fields is gradually transforming, a change I observe with optimism and hope. In Greece, the increasing presence of women in engineering is a positive sign. In Cadence specifically, the representation of women is high compared to other tech companies. As a mother to two daughters, I am acutely aware of the importance of being a role model to them. It's crucial to demonstrate that aspirations should not be limited by gender and that the technical field is as much a place for women as it is for men. Encouraging this mindset is vital for the progress of our society and for the empowerment of the next generation of women in technology. Advice from Vicky for those considering a career in a field different from their studies: Learning is a lifelong journey. Embrace every challenge as an opportunity to grow and learn something new. Stay curious and adaptable to navigate the ever-evolving landscape of technology. Being labeled an 'expert' is less important than the willingness to learn and adapt. Finding happiness in your work can lead to natural success. In the epoch of artificial intelligence, train the most powerful neural network: your brain. At Cadence, our commitment is towards establishing an inclusive workspace where women feel empowered to achieve their professional best. Anchored by our One Cadence—One Team ethos, we take pride in fostering a community where our driven, devoted, and skilled women employees excel, making exceptional contributions to our customers, communities, and one another. Are you just like Vicky, venturing beyond your academic background, and considering a career in a different domain while being surrounded by an encouraging and uplifting atmosphere? Then, you won't want to miss exploring career opportunities at Cadence—celebrated as 'A Great Place for Women to Work'! Click the button below to discover your next adventure! Learn more about Cadence Fem.AI Alliance, which aims to lead the gender equity revolution in the AI workforce.

DDR5 DIMM Architectures The DDR5 generation of Double Data Rate DRAM memories has experienced rapid adoption in recent years. In particular, the JEDEC-defined DDR5 Dual Inline Memory Module (DIMM) cards have become a mainstay for systems looking for high-density, high-bandwidth, off-chip random access memory[1]. Within a short time, the DIMM architecture evolved from an interconnected hierarchy of only SDRAM memory devices (UDIMM[2]) to complex subsystems of interconnected components (RDIMM/LRDIMM/MRDIMM[3]). DIMM Designs and Popular Verification Use Cases The growing complexity of the DIMMs presented a challenge for pre-silicon verification engineers who could no longer simply validate against single DDR5 SDRAM memory models. They needed to consider how their designs would perform against DIMMs connected to each channel and operating at gigahertz clock speeds. To address this verification gap, Cadence developed DDR5 DIMM Memory Models that encapsulated all of the architectural complexities presented by real-world DIMMs based on a robust, easy-to-use, easy-to-debug, and easy-to-reconfigure methodology. This memory-subsystem-in-a-single-instance model has seen explosive adoption among the traditional IP Developer and SOC Integrator customers of Cadence Memory Models. The Cadence DIMM models act as a single unit with all of the relevant DIMM components instantiated and interconnected within, and with all AC/Timing parameters among the various components fully matched out-of-the-box, based on JEDEC specifications as well as datasheets of actual devices in the market. The typical use-case for the DIMM models has been where the DUT is a DDR5 Memory Controller + PHY IP stack, and the validation plan mandated compliance with the JEDEC standards and Memory Device vendor datasheets. Unique Use Case for the DIMM Discrete Component Models Although the Cadence DIMM models have enjoyed tremendous proliferation because of their cohesive implementation and unified user API, the actual DIMM Models are built on top of powerful, flexible discrete component models, each of which was designed to stand on its own as a complete SystemVerilog UVM-based VIP. All of these discrete component models exist in the Cadence VIP Catalog as standalone VIPs, complete with their own protocol compliance checking capabilities and their own configuration mappings comprehensively modeling individual AC/Timing parameters. Because of this deliberate design decision, the Cadence DIMM Discrete Component Models can support a unique use-case scenario. Some users seek to develop IC Designs for the various DIMM components. Such users need verification environments that can model the individual components of a DIMM and allow them the option to replace one or another component with their Component Design IP. They can then validate that their component design is fully compatible with the rest of the components on the DIMM and meets the integrity of the overall DIMM compliance with JEDEC standards or Memory Vendor datasheets. The Cadence Memory VIP portfolio today includes various examples that demonstrate how customers can create DIMM “wrappers” by selecting from among the available DIMM discrete component models and “stitching” them together to build their own custom testbench around their specific Component Design IP. A Solution for Unique Component Scenarios The Cadence DDR5 DIMM Memory Models and DIMM Discrete Component Models can provide users with a flexible approach to validating their specific component designs with a fully populated pre-silicon environment. Augmented Verification Capabilities When the DIMM “wrapper” model is augmented with the Cadence DFI VIP[4] that can simulate an MC+PHY stack and offers a SystemVerilog UVM test API to the verification engineer, the overall testbench transforms into a formidable pre-silicon validation vehicle. The DFI VIP is designed as a combination of an independent DFI MC VIP and a DFI PHY VIP connected to each other via the DFI Standard Interface and capable of operating seamlessly as a single unit. It presents a UVM Sequence API to the user into the DFI MC VIP with the Memory Interface of the PHY VIP connected to the DIMM “wrapper” model. With this testbench in hand, the user can then fully take advantage of the UVM Sequence Library that comes with the DFI VIP to enable deep validation of their Component Design inside the DIMM “wrapper” model. Verification Capabilities Further Enhanced A possible further enhancement comes with the potential addition of an instance of the Cadence DIMM Memory Model in a Passive Monitor mode at the DRAM Memory Interface. The DIMM Passive Monitor consumes the same configuration describing the DIMM “wrapper” in the testbench, and thus can act as a reference model for the DIMM wrapper. If the DIMM Passive Monitor responds successfully to accesses from the DFI VIP, but the DIMM wrapper does not, then it exposes potential bugs in the DUT Components or in the settings of their AC/Timing parameters inside the DIMM wrapper. Debuggability, Interface Visibility, and Protocol Compliance One of the key benefits of the DIMM Discrete Component Models that become manifest, whether in terms of the unique use-case scenario described here, or when working with the wholly unified DDR5 DIMM Memory Models, is the increased debuggability of the protocol functionality. The intentional separation of the discrete components of a DIMM allows the user to have full visibility of the memory traffic at every datapath landmark within a DIMM structure. For example, in modeling an LRDIMM or MRDIMM, the interface between the RCD component and the SDRAM components, the interface between the RCD component and the DB components, and the interface between the SDRAM components and the DB components—all are visible and accessible to the user. The user has full access to dump the values and states of the wire interconnects at these interfaces to the waveform viewer and thus can observe and correlate the activity against any protocol violations flagged in the trace logs by any one or more of the DIMM Discrete Component Models. Access to these interfaces is freely available when using the DIMM Discrete Component Models. On the unified DDR5 DIMM Memory Models, a feature called Debug Ports enables the same level of visibility into the individual interconnects amidst the SDRAM components, RCD components, and DB components. When combined with the Waveform Debugger[5] capability that comes built-in with the VIPs and Memory Models offered by Cadence and used with the Cadence Verisium Debug[6] tool, the enhanced debuggability becomes a powerful platform. With these debug accesses enabled, the user can pull out transaction streams, chip state and bank state streams, mode register streams, and error message streams all right next to their RTL signals in the same Verisium Debug waveform viewer window to debug failures all in one place. The Verisium Debug tool also parses all of the log files to probe and extract messages into a fully integrated Smart Log in a tabbed window fully hyperlinked to the waveform viewer, all at your fingertips. A Solution for Every Scenario Cadence's DDR5 DIMM Memory Models and DIMM Discrete Component Models , partnered with the Cadence DFI VIP, can provide users with a robust and flexible approach to validating their designs thoroughly and effectively in pre-silicon verification environments ahead of tapeout commitments. The solution offers unparalleled latitude in debuggability when the Debug Ports and Waveform Debugger functions of the Memory Models are switched on and boosted with the use of the Cadence Verisium Debug tool. [1] Shyam Sharma, DDR5 DIMM Design and Verification Considerations , 13 Jan 2023. [2] Shyam Sharma, DDR5 UDIMM Evolution to Clock Buffered DIMMs (CUDIMM) , 23 Sep 2024. [3] Kos Gitchev, DDR5 12.8Gbps MRDIMM IP: Powering the Future of AI, HPC, and Data Centers , 26 Aug 2024. [4] Chetan Shingala and Salehabibi Shaikh, How to Verify JEDEC DRAM Memory Controller, PHY, or Memory Device? , 29 Mar 2022. [5] Rahul Jha, Cadence Memory Models - The Gold Standard , 15 Apr 2024. [6] Manisha Pradhan, Accelerate Design Debugging Using Verisium Debug , 11 Jul 2023.

Hearing is one of the most essential senses for engaging with the world. It enables us to converse, appreciate music, and remain alert to our surroundings. Hearing loss is a prevalent issue affecting millions of individuals globally and disconnecting them from a world where sound is vital to others and the environment. The World Health Organization (WHO) reports that over 5% of the global population requires hearing rehabilitation, a striking statistic highlighting this issue's pervasive nature. Technology has transformed audiology, evolving from simple ear trumpets to sophisticated modern hearing aids. This advancement began with the invention of the transistor, paving the way for devices that are fully wearable inside or behind the ear. Although hearing aids have been available for many years, historically, access to these critical devices has been insufficient, resulting in numerous individuals lacking the necessary support. However, recent advances in hearing aid technology promise improved acoustic experiences, employing modern techniques like binaural processing and neural networks. These innovations demand sophisticated architecture to balance high memory needs with low power consumption in a user-friendly design. Cadence is at the forefront of this technological evolution, offering tools and IP solutions that enhance the accessibility, efficiency, and impact of hearing aids, paving the way for a more inclusive future. This blog explores how Cadence's advanced DSPs are transforming hearing aid design and making them more accessible, efficient, and impactful. Hearing Aids: A Testament to Human Ingenuity The transition from analo g to digital technology in the late 20th century further transformed hearing aids, offering superior sound quality, customization, and the ability to connect to various electronic devices, thus enhancing the user experience markedly. Today's hearing aids are highly effective, versatile, and nearly invisible, a significant advancement from early attempts to address hearing loss. They also feature advanced noise cancellation and connectivity options, allowing users to integrate seamlessly into the digital world. This progression not only highlights the industry's commitment to improving user experience and accessibility but also offers a glimpse into a future where hearing loss is no longer a barrier. Challenges Despite advancements and sophistication, there are several challenges related to hearing aid design and adoption. Users demand smaller, more discreet devices that don't sacrifice performance. While the shift towards sleeker designs is aesthetically pleasing, it introduces substantial complexities in product design. Designers face the challenges of integrating essential components, such as batteries and peripherals, into increasingly compact spaces. Power consumption remains a critical concern, as these devices must remain operational throughout the day. Leveraging neural networks to enhance the signal-to-noise ratio (SNR) for better quality demands additional memory capacity. Consequently, there is a pressing need for flexible, low-power architectures that incorporate all necessary memory and peripherals without compromising the device’s compact size. Adopting AI for adjusting hearing aid volume to fit an individual's specific auditory requirements is a significant challenge and demands more memory and effort. Besides this, reliability and cost are significant challenges for manufacturers. Cadence's Role in Transforming Hearing Aids In hearing aid development, the capacity to evaluate the energy efficiency of SoCs across different frequencies in real time is crucial. These applications demand cohesive, energy-efficient solutions that can uphold high performance. The Cadence Tensilica HiFi and Fusion F1 DSP family emphasize minimal power usage while providing robust performance, ideally suited for a wide range of audio and voice applications. The Cadence Tensilica HiFi DSP family, a high-performance audio technology with AI acceleration and advanced DSP capability, offers feature-rich audio, speech, and imaging for wearables, automotive, home entertainment, digital assistants, and ASR. The Tensilica HiFi DSP family accelerates innovation with its comprehensive instruction set and supports fixed- and floating-point data types. Simplifying software development, it offers C/C++ programming, an auto-vectorizing compiler, and a rich DSP software library through the Cadence Tensilica Xplorer development environment. With the flexibility to customize and enhance performance through additional instructions and better I/O bandwidth, the Tensilica HiFi and Fusion DSP families offer a robust, low-energy audio solution compatible across an expansive software ecosystem for various applications and devices. Conclusion Technological advancements are driving hearing aid evolution; the future of hearing aids lies in further miniaturization and functionality enhancement. Cadence's ongoing innovations aim to improve signal processing and noise reduction, even in challenging environments. The integration of neural networks promises more apparent sound transmission and greater adaptability. Cadence is working on improving how these devices process signals and reduce noise and has initiated a collaborative venture with distinguished entities like GlobalFoundries (GF), Hoerzentrum Oldenburg gGmbH, and Leibniz University Hannover. This collaboration has borne fruit in the form of the industry's first binaural hearing aid system-on-chip (SoC) prototype, the Smart Hearing Aid Processor ( SmartHeAP ). Learn More Cadence, GlobalFoundries, Hoerzentrum Oldenburg and Leibniz University Hannover Collaborate to Advance Hearing Aid Technology Cadence Extends Battery Life and Improves User Experience for Next-Generation Hearables, Wearables and Always-On Devices Advancing the Future of Hearing Aids with Cadence Bluetooth LE Audio, Hearing Aids, and Mindtree

Celebrated for their unparalleled engineering expertise and pioneering mindset, McLaren stands at the forefront of innovation. Theirs is a story of engineering excellence, a symphony of speed driven by the relentless pursuit of aerodynamic perfection. In 2022, Cadence was named an Official Technology Partner of the McLaren Formula 1 Team. The multi-year partnership between McLaren and Cadence has helped redefine the boundaries of what’s possible in Formula 1 aerodynamics. Shaving off a fraction of a second per lap can make all the difference in a podium finish, and track conditions bring layers of complexity to the design process. That’s where Cadence steps in with Fidelity CFD Software. The Cadence Fidelity CFD software is a comprehensive suite of computational fluid dynamics (CFD) solutions. Access to this solution allows the McLaren F1 team to accelerate their CFD workflow, enabling them to assess designs faster and more precisely. It also allows them to investigate airflows and tackle design projects that require advanced compute power and precision. With Fidelity Flow’s solver capabilities and Python-driven automation, Cadence’s CFD software aids the advancement of aerodynamic simulations that go into McLaren’s F1 cars. With a customized, high-quality, multi-block meshing strategy and optimized workflow, Fidelity CFD makes design exploration more automated, thereby helping establish a strong foundation for McLaren’s future success on the track. Lando Norris, F1 driver for McLaren, said, “As a driver, I saw the impact of every decision made in the design room in every simulation run. The work on aerodynamics directly translates to the confidence I have on track, the grip in every turn, and the speed on every straight. This partnership, this technology, is what will give us the edge. It's not just about battling opponents; it's about mastering the airflow around the car in every driving condition on every track.” If you’re interested in learning more about the importance of CFD in McLaren’s racing success, be sure to attend our upcoming webinar, “CFD and Experimental Aerodynamics in McLaren F1 Engineering.” Christian Schramm, McLaren’s director of advanced projects, and Cadence’s Benjamin Leroy will be the main speakers for the event. Register today to secure your spot! For more insights on the Formula 1 car design process, take a look at the case study, “ McLaren Formula 1 Car Aerodynamics Simulation with Cadence Fidelity CFD Software .” Learn more about how McLaren and Cadence are engineering success . “Designed with Cadence” is a series of videos that showcases creative products and technologies that are accelerating industry innovation using Cadence tools and solutions. For more Designed with Cadence videos, check out the Cadence website and YouTube channel .

An increasing number of embedded designs are multi-core systems. At the pre-silicon stage, customers use a simulation platform for architectural exploration and software development. Architects want to quantify the impact of the number of cores, local memory size, system memory latency, and interconnect bandwidth. Software teams wish to have a practical development platform that is not excruciatingly slow. This blog shares a recipe for simulating Cadence DSPs in a multi-core design as separate x86 processes. The purpose is to reduce simulation time for customers with simple multi-core models where cores interact only through shared memory. It uses a Vision Q8 multi-core design to share details of the XTSC (Xtensa SystemC) model, software application, commands, and debugging. Note the details shared are for a simulation run on an Ubuntu Linux machine, Xtensa tools version RI-2023.11, and core configuration XRC_Vision_Q8_AODP. Complex vs. Simple Model A complex model (Figure 1) is one in which one core accesses another core's local memory, or there are inter-core interrupts. Simulation runs as a single x86 process. Figure 1 A simple model (Figure 2) is one in which cores interact only through shared memory. Shared memory is a file on the Linux host. Figure 2 Multiple x86 Process – Simple Model As depicted in Figure 3, each core is simulated using a separate x86 process. Cores use barriers and locks placed in shared memory for synchronization and data sharing. Locks are placed in un-cached memory that support exclusive subordinate access. The XTSC memory component, xtsc_memory , supports exclusive subordinate access. Cadence software tools provide a way to define memory regions as cached or uncached. For more details, please refer to Cadence's Linker Support Packages (LSP) Reference Manual for Xtensa SDK . Figure 3 Demo Application A demo application performs a 128x128 matrix multiplication. Work is divided so that each of the 32 cores computes four rows of the 128x128 result matrix. Cores use barriers to synchronize. Cadence tools provide APIs for synchronization and locking. Please refer to Cadence's System Software Reference Manual for more details. Note without a higher-level lock, prints from all cores will get mixed up. Therefore, in the demo application, only core#0 prints. SystemC Simulation The following sample command runs the 32-core simulation in such a way that each core is a separate x86 process. It runs a matrix multiplication application in cycle-accurate mode with logging off. >>for (( N=0; N >xtsc-run -define=NumCores=32 -define=N=0 -define=LOGGING=0 -define=TURBO=0 --xxdebug=sync -i=coreNN.inc -sc_main=sc_main.cpp -no_sim Modify the sc_main.cpp generated for core#0 to create a generic sc_main.cpp to build a single simulation executable for all cores. The Xtensa SDK includes Makefile targets to build custom simulations. By default, the simulation runs in cycle-accurate mode. Fast functional (Turbo) mode provides additional improvement over cycle-accurate mode. Note that the fast functional mode has an initialization phase, so gains are visible only when running an application with longer run times. Simulation Wall Time The table captures simulation wall time improvements. Note that these are illustrative wall time numbers. Actual wall time numbers and improvements will depend on your host machine's performance and your application. Simulation Type Wall Time Comments Single process cycle accurate mode 17500 seconds Multiple x86 processes cycle accurate mode 1385 seconds 12X faster than single process Multiple x86 processes turbo mode 415 seconds 3X faster than cycle accurate mode Debugging Attaching a debugger to each of the individual x86 core simulation processes is possible. Synchronous stop/resume and core-specific breakpoints are also supported. Configure the Xplorer launch configuration and attach it to the running simulation processes as follows (Figure 5) Figure 5 Figure 6 shows 32 debug contexts. Figure 6 As shown, using Xtensa SDK, you can create a multi-core simulation that functions as a practical software development platform. Please visit the Cadence support site for information on building and simulating multi-core Xtensa systems.

This post was contributed by Liliko Uchida, application engineer at Cadence. Being a “Woman in STEM” is a phrase that has long been used to describe the holistic experience shared by thousands of women globally, yet it still makes us feel isolated. Partially due to the statistics of gender population in the STEM workforce and the remainder due to our own internal obstacles, being a woman in STEM continues to be a challenge. While many of us know the should-do’s and should-be’s of taking on this unique role objectively, we struggle to implement them. After all, our perseverance as engineers, mathematicians, businesswomen, programmers, and scientists is largely affected by subjectivity. The UMass Lowell Women’s Leadership Conference 2024 aimed to tackle this problem by uniting hundreds of women with shared experiences under one roof. Not only did the conference provide us with the knowledge necessary to persevere, but it also gave us the tools that will allow us to thrive and act upon the facts we already know. It is my hope that through this blog post, I can share some of my main takeaways from this special day. Be Confident This is one of the most palpable pieces of advice we always hear. Yet so many of us struggle to build this confidence because we don’t know how. Featured speaker Nicole Kalil defined confidence as “complete trust in oneself”.”One way to build this self-trust is by getting to know yourself on a deeper level. By creating a true inner connection, we begin to see ourselves as a whole instead of hyper-focusing on our shortcomings frequently illusioned by imposter syndrome. In one of the sessions, we were asked to introduce ourselves to our neighbors, not by what we do for work, but by who we are as a person. Even if this opportunity does not arise every day, this practice can be done simply by listing characteristics of yourself that define who you are. Who do you care for? How do you show them? What are your life goals oriented towards? How do you observe others’ behavior around you, and what does that say about how you make them feel? Getting to know you beneath the surface and allowing yourself to be seen for who you are is critical in building internal confidence. With practice, this self-reassurance will grow independent of external factors. Take Risks “Sometimes, you have to put your foot in the elevator” - Barb Vlacich, Keynote Speaker When opportunities arise, the only thing you can do to have a chance is to try. Without putting your foot in the elevator, the doors will close, becoming a missed opportunity. Similarly, several of the conference’s speakers also emphasized that the answer to every unasked question will always be a no. Even if you are not ready to full-send a negotiation, ask for a raise, or respectfully disagree with a co-worker’s opinion, start by getting comfortable asking uncomfortable questions. Just one discomfort a day will help in building an immunity to the anxiety that comes with taking risks, typically driven by our self-doubt. Another interesting point that stood out from the conference was the statistics of self-assessed qualifications between men and women. During the negotiation panel, it was revealed that men typically feel they only need 60% of the qualifications under a job description to apply, whereas women often feel they need close to 100%. These numbers alone demonstrate how the pure mental habits of men continue to funnel them into STEM and not women. The next time you seek a new opportunity, assess yourself based on the 60% and use it as a checklist threshold. If more women are able to pursue STEM careers using these numbers, the more likely we will begin to populate these roles. Build Your Genuine Network “ The essence of communication lies in the mutual exchange of ideas and emotions. And when the listener isn’t invested, it undermines the entire purpose of the conversation. Why are you having it anyway?” This is a quote from episode 186 of Julie Brown’s podcast This Sh!t Works called “The 5 Steps to Being an Active Listener”. Julie Brown is a Networking Coach, author, and podcast host who guided an energetic and candid conversation about networking and building a personal brand for women. Networking is often misunderstood as putting your name and qualifications out on the table for as many people to pick up your cards. While making these things known is important, they are not what nurtures effective connections. The key to cultivating your genuine network is to activate a sincere interest in the people you meet. Become the proactive receiver of the confidence exercise discussed above. When you meet someone new, what can you take away from them as a person, not an employee? By making people feel heard, even through the little conversations, you can begin to develop more meaningful connections that resonate. And, with practice, the sometimes inherent need to overcompensate by defining yourself with your resume will slowly fade. It was a wonderful opportunity to attend the UML Women’s Leadership Conference with four other inspiring Cadence women. Not only was the conference a motivating learning experience, but it was also a wonderful opportunity for us to bond together as women and feel supported by each other. The most eye-opening part of the day was seeing just how many women alike were sitting under the same roof. The conclusion of the event led me to feel proud to be an engineer, proud to be at Cadence, and most importantly, proud to be a woman. Learn more about life at Cadence .

The demand for higher compute performance, energy efficiency, and faster time-to-market drove the conversations at this year's Open Compute Project (OCP) Global Summit in San Jose, California. It was the scene of showcasing groundbreaking innovations, expert-led sessions, and networking opportunities to drive the future of data center technology. For those who didn't get to attend or stop by our booth, here's a recap of Cadence's comprehensive solutions that enable next-generation compute technology, AI data center design, analysis, and optimization. Optimized Data Center Design and Operations As the data center community increasingly faces demands for enhanced efficiency, thermal management, sustainability, and performance optimization, data center operators, IT managers, and executives are looking for solutions to these challenges. At the Cadence booth, attendees explored the Cadence Reality Digital Twin Platform and Celsius EC Solver. These technologies are pivotal in achieving high-performance standards for AI data centers, providing advanced digital twin modeling capabilities that redefine next-generation data center design and operation. The Celsius EC Solver demonstration showed how it solves challenging thermal and electronics cooling management problems with precision and speed. CadenceCONNECT: Take the Heat Out of Your AI Data Center Cadence hosted a networking reception on October 16 titled "Take the Heat Out of Your AI Data Center." In today's AI era, managing the heat generated by high-density computing environments is more critical than ever. This reception offered insights into current and emerging data center technologies, digital twin cooling strategies that deliver energy-saving operations, and a chance to engage with industry leaders, Cadence experts, and peers to explore the latest cooling, AI, and GPU acceleration advancements. Here's a recap: Researcher, author, and entrepreneur Dr. Jon Koomey highlighted the inefficiency of data centers in his talk "The Rise of Zombie Data Centers," noting that 20-30% of their capacity is stranded and unused. He advocated for organizational changes and technological solutions like digital twins to reduce wasted energy and improve computational effectiveness as AI deployments increase. In "A New Millennium in Multiphysics System Analysis," Cadence Corporate VP Ben Gu explained the company's significant strides in multiphysics system analysis, evolving from chip simulation to a broader application of computational software for simulating various physical systems, including entire data centers. He noted that the latest Cadence venture, a digital twin platform for data center optimization, opened the opportunity to use simulation technology to optimize the efficiency of data centers. Senior Software Engineering Group Director Albert Zeng highlighted the Cadence Reality DC suite's ability to transform data center operations through simulation, emphasizing its multi-phase engine for optimal thermal performance and the integration of AI capabilities for enhanced design and management. A panel discussion titled "Turning AI Factory Blueprints into Reality at the Speed of Light" featured industry experts from NVIDIA, Norman Wright Precision Environmental and Power, NV5, Switch Data Centers, and Cadence, who explored the evolving requirements and multidimensional challenges of AI factories, emphasizing the need for collaboration across the supply chain to achieve high-performing and sustainable data centers. Watch the highlights. Transforming Designs from Chips to Data Centers The OCP Global Summit 2024 has reaffirmed its status as a pivotal event for data center professionals seeking to stay at the forefront of technological advancements. Cadence's contributions, from groundbreaking digital twin technologies to innovative cooling strategies, have shed light on the path forward for efficient, sustainable data centers. For data center professionals, IT managers, and engineers, the insights gained at this summit are invaluable in navigating the challenges and opportunities presented by the burgeoning AI era. Partnering with Arm Arm Total Design Cadence is a member of the Arm Total Design program. At an invitation-only special Arm event, Cadence's VP of Research and Development, Lokesh Korlipara, delivered a presentation focusing on data center challenges and design solutions with Arm Neoverse Compute Subsystem (CSS). The session highlighted: Efficient integration of Arm Neoverse CSS into system on chips (SoCs) with pre-integrated connectivity IP Performance analysis and verification of the Neoverse CSS integration into the SoC through Cadence's System VIP verification suite and automated testbench creation, enhancing both quality and productivity Jumpstarting designs through Cadence's collaboration with Arm for 3D-IC system planning, chiplets, and interposers Design Services readiness and global scale to support and/or deliver the most demanding Arm Neoverse CSS-based SoC design projects Cadence Supports Arm CSS in Arm Booth During the event, Cadence conducted a demo in the Arm booth that showcased the Cadence System VIP verification suite. The demo highlighted automated testbench creation and performance analysis for integrating the Arm CSS into SoCs while enhancing verification quality and productivity. Summary Cadence offers data center solutions for designing everything from the compute and networking chips to the board, racks, data centers, and campuses. Stay connected with Cadence and other industry leaders to continue exploring the innovations set to redefine the future of data centers. Learn More Cadence Joins Arm Total Design Cadence Arm-Based Solutions Cadence Reality Digital Twin Platform

On November 5, 2024, the Cadence Bangalore Toastmasters Club celebrated a significant milestone by hosting its 50th meeting. Established in December 2020, the club was created to provide a supportive environment for individuals looking to improve their communication and leadership skills. Over the years, the club has evolved into a vibrant community filled with success stories of personal development and newfound confidence. A testament to the club's dedication is its achievement of the "Select Distinguished Club" status during the 2023-2024 program year. By fulfilling 7 out of 10 distinguished goals, the club highlighted its commitment to excellence—a success driven by its vibrant members' relentless focus and perseverance. The strategic insight gained from regular Toastmasters committee meetings and the influential "Moments of Truth" sessions held in 2023 and 2024 are key to this success. Our club members have consistently demonstrated strong performance in various speech contests, with notable achievements across multiple levels. In 2023, members excelled in Evaluation and Table Topics contests, reaching the district level while advancing to the Division Level in the International Speech Contest. Continuing their success into 2024, members again qualified for area-level contests, securing third-place positions in the Evaluation and Table Topics categories, highlighting the club's dedication and competitive spirit. The 50th meeting was based on the theme of serendipity. It was not only a milestone celebration but also a vibrant festival of achievements and growth. The day buzzed with energy as activities like a spirited Treasure Hunt injected enthusiasm and camaraderie among attendees. Distinguished guests, including Kripa Venkitachalam and Madhavi Rao, enriched the occasion with inspiring speeches. Madhavi reignited the club's spirit, while Kripa's discourse on the Growth Mindset and the "Power of Yet" encouraged members to pursue continuous self-improvement. The Cadence Bangalore Toastmasters Club is enthusiastic about its promising future and is committed to creating an environment that promotes personal and professional growth. Many members are close to completing their Toastmasters levels and pathways, and this term, a new group of approximately 30 individuals has joined, bringing the total membership to 52. This vibrant community is just beginning its journey and is eager to reach new milestones together through mutual support and a shared commitment to excellence. The transformations experienced by many club members are truly compelling. They often share how the club has significantly improved their communication skills and boosted their confidence. One member recalls, "Before joining, I found public speaking intimidating. Now, I embrace every opportunity to share my ideas." Another member highlights how the club's supportive environment helped him overcome his fear of public speaking, propelling his career to new heights. This culture of constructive feedback and continuous improvement has inspired countless members to pursue their dreams with renewed determination and optimism. The Cadence Bangalore Toastmasters Club's journey is a living testament to the power of community and the potential within each of us to grow and achieve greatness. As the club continues to evolve and inspire, it serves as a beacon for those aspiring to transform their skills and seize their moment in the spotlight. Learn more about life at Cadence.

Each November, we are reminded of the bravery and dedication of those who have served our country. At Cadence, we thank our Veteran employees for their patriotism by reaffirming our commitment to honoring their sacrifices and recognizing their contributions to our business success. Our diverse and inclusive culture is strengthened by the unique perspective of our Veteran employees, and we are proud to support the Veterans Inclusion Group as a space for community members and their allies to connect. In celebration of Veterans Day, we were excited to catch up with Johnathan Edmonds, Veterans Inclusion Group Lead and Design Engineering Director, for a heartfelt chat on his journey through military service to leadership within Cadence. Throughout the conversation, he shared the importance of creating space for Veterans, the skills they offer, and his aspirations for what the Veterans Inclusion Group will achieve in the years ahead. Oh yeah, and he flies planes, too! Join us as we dive into what makes this holiday special for so many across the nation and how we can respectfully commemorate it together. Johnathan, you’re a retired Air Force Reservist, pilot, and now a Design Engineering Director. Can you tell us about your journey from the military to your current role at Cadence? I started my military and electronics journey in the Navy. I enlisted at 18 and served for six years as an aviation electronics technician. During this time, I was able to learn about and repair electronics on planes. This set me up for success, and when I was honorably discharged, I attended Virginia Tech to study computer engineering. Once I graduated, I continued my career as an engineer, but I still wanted to be a military pilot. From my past experience, I knew the reserves were an option where I could learn to fly and still have a civilian career. Not only was I lucky enough to get selected to go to pilot training, but after I returned from flight school, my luck grew, and I was hired at Cadence. Cadence has supported me throughout my military career, which has been a great benefit, as many companies don’t support reservists. The best thing about serving and being employed at Cadence is how I could blend my skill sets to further the Air Force’s mission and achieve great things in engineering. As the first lead of Cadence’s Veterans Inclusion Group, you played an integral part in growing our culture and building community at the company since launching the group four years ago. What inspired you to take on the role of Inclusion Group Lead? I was inspired by three things: camaraderie, service, and outreach. I wanted to see if we could achieve a similar sense of community through the Veterans Inclusion Group as we had during our service life. I also wanted to see how we could better serve our Veterans here at Cadence. I wanted to explore any benefits that could be expanded, roles that could be developed by Vets, and, lastly, I wanted to serve a broader community. COVID-19 put a damper on some of the community support, but we are getting back on track with Veteran employment programs and volunteer efforts like Carry the Load and Gold Star Families. Why is it important to have this space dedicated to Veteran employees? There are many reasons! Networking, for one, creates a stronger, more unified Cadence culture. Two, Vets face a variety of issues not generally understood by those who have not served, such as PTSD, where to get help for disabilities, how to get an old medical record, etc. As I mentioned, I’m also passionate about connecting Veterans with employment and job opportunities. It is so nice to work for a company that actively recruits Vets. We have our own “language,” if you will, so it’s nice to have a space to talk in the language that we are familiar with. What have been some of your favorite moments leading this group over the past few years? Are there any “wins” that you would like to recognize? We have a lot of wins. Events held during COVID-19 and getting past COVID-19, donating to worthwhile causes, and hosting guest speakers are all fantastic milestones and accomplishments. That said, the biggest win is the hiring of new Veteran employees. Mark Murphy, Corporate VP of Sales Operations, and I have both welcomed Vets to our team during this time, and it is such a joy to watch what someone can do when given the opportunity to succeed in the right environment. As you are set to transition out of the lead role next year, what do you hope to see the Veterans Inclusion Group accomplish next? My hope is that the Veterans Inclusion Group partners with other companies, expanding our reach externally and exploring new opportunities to engage Veterans outside of Cadence. Johnathan (left) speaks on an inclusion group panel, along with David Sallard (center), lead of Cadence's Black Inclusion Group and Sr. Principal Application Engineer; Christina Jamerson (on screen), lead of Cadence's Abilities Inclusion Group and Demand Generation Director; and Dianne Rambke (right), lead of Cadence's Latinx Inclusion Group and Marketing Communications Director. What are the important ways that people can signal inclusion and respectfully honor Veterans at work? What are the most meaningful or impactful actions employees everywhere can take to support Veteran coworkers? I think there is one answer to both questions. I recommend that people engage with their companies’ employee resource groups (ERGs) and have conversations with them. Opening up the lines of communication will lead to new paths in their journeys. What are you looking forward to in 2025, both personally and professionally? In 2025, professionally, I am looking forward to taking mixed-signal systems and verification to another level by including emulation, automatic model generation, and seeing which boundaries we can push in our SerDes and Chiplets products. Personally, I am looking forward to making my SXS street legal so I can drive places without getting a ticket, seeing my children participate in sports, church, and school, and taking my wife on vacation to Europe or somewhere else we can unplug. Learn more about Cadence’s Inclusion Groups, diverse culture, and commitment to belonging.

Peripheral Component Interconnect Express (PCIe) is a high-speed interface standard widely used for connecting processors, memory, and peripherals. With the increasing reliance on PCIe to handle sensitive data and critical high-speed data transfer, ensuring data integrity and encryption during verification is the most essential goal. As we know, in the field of verification, randomization is a key technique that drives robust PCIe verification. It introduces unpredictability to simulate real-world conditions and uncover hidden bugs from the design. This blog examines the significance of randomization in PCIe IDE verification, focusing on how it ensures data integrity and encryption reliability, while also highlighting the unique challenges it presents. For more relevant details and understanding on PCIe IDE you can refer to Introducing PCIe's Integrity and Data Encryption Feature . The Importance of Data Integrity and Data Encryption in PCIe Devices Data Integrity : Ensures that the transmitted data arrives unchanged from source to destination. Even minor corruption in data packets can compromise system reliability, making integrity a critical aspect of PCIe verification. Data Encryption : Protects sensitive data from unauthorized access during transmission. Encryption in PCIe follows a standard to secure information while operating at high speeds. Maintaining both data integrity and data encryption at PCIe’s high-speed data transfer rate of 64GT/s in PCIe 6.0 and 128GT/s in PCIe 7.0 is essential for all end point devices. However, validating these mechanisms requires comprehensive testing and verification methodologies, which is where randomization plays a very crucial role. You can refer to Why IDE Security Technology for PCIe and CXL? for more details on this. Randomization in PCIe Verification Randomization refers to the generation of test scenarios with unpredictable inputs and conditions to expose corner cases. In PCIe verification, this technique helps us to ensure that all possible behaviors are tested, including rare or unexpected situations that could cause data corruption or encryption failures that may cause serious hindrances later. So, for PCIe IDE verification, we are considering the randomization that helps us verify behavior more efficiently. Randomization for Data Integrity Verification Here are some approaches of randomized verifications that mimic real-world traffic conditions, uncovering subtle integrity issues that might not surface in normal verification methods. 1. Randomized Packet Injection: This technique randomized data packets and injected into the communication stream between devices. Here we Inject random, malformed, or out-of-sequence packets into the PCIe link and mix valid and invalid IDE-encrypted packets to check the system’s ability to detect and reject unauthorized or invalid packets. Checking if encryption/decryption occurs correctly across packets. On verifying, we check if the system logs proper errors or alerts when encountering invalid packets. It ensures coverage of different data paths and robust protocol check. This technique helps assess the resilience of the IDE feature in PCIe in below terms: (i) Data corruption: Detecting if the system can maintain data integrity. (ii) Encryption failures: Testing the robustness of the encryption under random data injection. (iii) Packet ordering errors: Ensuring reordering does not affect data delivery. 2. Random Errors and Fault Injection: It involves simulating random bit flips, PCRC errors, or protocol violations to help validate the robustness of error detection and correction mechanisms of PCIe. These techniques help assess how well the PCIe IDE implementation: (i) Detects and responds to unexpected errors. (ii) Maintains secure communication under stress. (iii) Follows the PCIe error recovery and reporting mechanisms (AER – Advanced Error Reporting). (iv) Ensures encryption and decryption states stay synchronized across endpoints. 3. Traffic Pattern Randomization: Randomizing the sequence, size, and timing of data packets helps test how the device maintains data integrity under heavy, unpredictable traffic loads. Randomization for Data Encryption Verification Encryption adds complexity to verification, as encrypted data streams are not readable for traditional checks. Randomization becomes essential to test how encryption behaves under different scenarios. Randomization in data encryption verification ensures that vulnerabilities, such as key reuse or predictable patterns, are identified and mitigated. 1. Random Encryption Keys and Payloads: Randomly varying keys and payloads help validate the correctness of encryption without hardcoding assumptions. This ensures that encryption logic behaves correctly across all possible inputs. 2. Randomized Initialization Vectors (IVs): Many encryption protocols require a unique IV for each transaction. Randomized IVs ensure that encryption does not repeat patterns. To understand the IDE Key management flow, we can follow the below diagram that illustrates a detailed example key programming flow using the IDE_KM protocol. Figure 1: IDE_KM Example As Figure 1 shows, the functionality of the IDE_KM protocol involves Start of IDE_KM Session, Device Capability Discovery, Key Request from the Host, Key Programming to PCIe Device, and Key Acknowledgment. First, the Host starts the IDE_KM session by detecting the presence of the PCIe devices; if the device supports the IDE protocol, the system continues with the key programming process. Then a query occurs to discover the device’s encryption capabilities; it ensures whether the device supports dynamic key updates or static keys. Then the host sends a request to the Key Management Entity to obtain a key suitable for the devices. Once the key is obtained, the host programs the key into the IDE Controller on the PCIe endpoint. Both the host and the device now share the same key to encrypt and authenticate traffic. The device acknowledges that it has received and successfully installed the encryption key and the acknowledgment message is sent back to the host. Once both the host and the PCIe endpoint are configured with the key, a secure communication channel is established. From this point, all data transmitted over the PCIe link is encrypted to maintain confidentiality and integrity. IDE_KM plays a crucial role in distributing keys in a secure manner and maintaining encryption and integrity for PCIe transactions. This key programming flow ensures that a secure communication channel is established between the host and the PCIe device. Hence, the Randomized key approach ensures that the encryption does not repeat patterns. 3. Randomization PHE: Partial Header Encryption (PHE) is an additional mechanism added to Integrity and Data Encryption (IDE) in PCIe 6.0. PHE validation using a variety of traffic; incorporating randomization in APIs provided for validating PHE feature can add more robust Encryption to the data. Partial Header Encryption in Integrity and Data Encryption for PCIe has more detailed information on this. Figure 2: High-Level Flow for Partial Header Encryption 4. Randomization on IDE Address Association Register values: IDE Address Association Register 1/2/3 are supposed to be configured considering the memory address range of IDE partner ports. The fields of IDE address registers are split multiple values such as Memory Base Lower, Memory Limit Lower, Memory Base Upper, and Memory Limit Upper. IDE implementation can have multiple register blocks considering addresses with 32 or 64, different registers sizes, 0-255 selective streams, 0-15 address blocks, etc. This Randomization verification can help verify all the corner cases. Please refer to Figure 2. Figure 3: IDE Address Association Register 5. Random Faults During Encryption: Injecting random faults (e.g., dropped packets or timing mismatches) ensures the system can handle disruptions and prevent data leakage. Challenges of IDE Randomization and its Solution Randomization introduces a vast number of scenarios, making it computationally intensive to simulate every possibility. Constrained randomization limits random inputs to valid ranges while still covering edge cases. Again, using coverage-driven verification to ensure critical scenarios are tested without excessive redundancy. Verifying encrypted data with random inputs increases complexity. Encryption masks data, making it hard to verify outputs without compromising security. Here we can implement various IDE checks on the IDE callback to analyze encrypted traffic without decrypting it. Randomization can trigger unexpected failures, which are often difficult to reproduce. By using seed-based randomization, a specific seed generates a repeatable random sequence. This helps in reproducing and analyzing the behavior more precisely. Conclusion Randomization is a powerful technique in PCIe verification, ensuring robust validation of both data integrity and data encryption. It helps us to uncover subtle bugs and edge cases that a non-randomized testing might miss. In Cadence PCIe VIP, we support full-fledged IDE Verification with rigorous randomized verification that ensures data integrity. Robust and reliable encryption mechanisms ensure secure and efficient data communication. However, randomization also brings various challenges, and to overcome them we adopt a combination of constrained randomization, seed-based testing, and coverage-driven verification. As PCIe continues to evolve with higher speeds and focuses on high security demands, our Cadence PCIe VIP ensures it is in line with industry demand and verify high-performance systems that safeguard data in real-world environments with excellence. For more information, you can refer to Verification of Integrity and Data Encryption(IDE) for PCIe Devices and Industry's First Adopted VIP for PCIe 7.0 . More Information: For more info on how Cadence PCIe Verification IP and TripleCheck VIP enables users to confidently verify IDE, see our VIP for PCI Express , VIP for Compute Express Link for and TripleCheck for PCI Express For more information on PCIe in general, and on the various PCI standards, see the PCI-SIG website .

Hello Folks,

Problem statement first: How does one properly setup tensorflow for running on a DSVM using a remote Docker environment? Can this be done in aml_config/*.runconfig?

I receive the following message and I would like to be able to utilize the increased speeds of the extended FMA operations.

tensorflow/core/platform/cpu_feature_guard.cc:140] Your CPU supports instructions that this TensorFlow binary was not compiled to use: AVX2 FMA

Background: I utilize a local docker environment managed through Azure ML Workbench for initial testing and code validation so that I'm not running an expensive DSVM constantly. Once I assess that my code is to my liking, I then run it on a remote docker instance on an Azure DSVM.

I want a consistent conda environment across my compute environments, so this works out extremely well. However, I cannot figure out how to control the tensorflow build to optimize for the hardware at hand (i.e. my local docker on macOS vs. remote docker on Ubuntu DSVM)

Hi,

i am compiling firmware under Windows transfer the binaries and the sources to Linux to simulate/debug there. The problem is that the paths in the DWARF debug info of the .elf file are the absolute Windows paths as set by the compiler so they are useless under Linux. Is it possible to configure mappings of these paths to the Linux paths when simulating/debugging like with e.g. GDB (https://sourceware.org/gdb/current/onlinedocs/gdb/Source-Path.html#index-set-substitute_002dpath)?

thx,

Peter

Cadence_SPB_17.4-2019 + Matlab R2019a

请参考本文档中的步骤进行操作

1，打开BJT_AMP.opj

2，设置Matlab路径

3，打开BJT_AMP_SLPS.slx

4，打开后，设置PSpiceBlock，出现或CEFSimpleUI.exe停止工作

5，添加模块

6，相同

7，打开pspsim.slx

8，相同

9，打开C： Cadence Cadence_SPB_17.4-2019 tools bin

orCEFSimpleUI.exe和orCEFSimple.exe

10，相同

我想问一下如何解决，非常感谢！

Please give me some ideas. Thank you very much.

While doing the lvs it's showing an error in gnd connection, I am not being able to understand exactly what is the error and what do I need to do to remove this error?

We are having some issues with deploying i. We are looking for the silent command switch for deployment including the licence agreement acceptance.

Ideally we would like a regular MSI that we could install for all users and not in the user content.

I want to download Xtensa C/C++ Compiler (XCC) . I dont know where to download. Please help me.

Hi 

I have a Xtensa compiler issue that the compilation for switch case would be optimized in some patterns and leads to unexpected result. I cross-checked the assembly code and found that such compiler optimization seems to be similar to the tree-switch-conversion feature in GCC compiler

• https://gcc.gnu.org/onlinedocs/gcc-9.1.0/gcc/Optimize-Options.html
  -ftree-switch-conversion
      Perform conversion of simple initializations in a switch to initializations from a scalar array. This flag is enabled by default at -O2 and highe

Unfortunately I don't find any similar compiler option(like -fno-tree-switch-conversion) in Xtensa compiler(XCC) to enable/disable such feature and such feature seems like enabled in XCC by default even if I'm using -O0 for the least optimization.

I'm wondering if there's any possible solution to permanently disable such feature in XCC?

PS: The release version of XCC compiler I'm using is RD-2012.5

Thanks!

Hi,

I need to design EPC8002 eGaN switch in cadence. Can someone provide me step by step guide on hoe to add EPC8002 into my cadence. I am working on BCD180.

Thank you 

Ihsan

Hi,

I'm looking to download Tensilica SDK for evaluation, but I can't get past the registration form:

This is the 17th installment of The Rationalist, my column for the Times of India.

One of my favourite English words comes from chess. If it is your turn to move, but any move you make makes your position worse, you are in ‘Zugzwang’. Narendra Modi was in zugzwang after the Pulwama attacks a few days ago—as any Indian prime minister in his place would have been.

An Indian PM, after an attack for which Pakistan is held responsible, has only unsavoury choices in front of him. He is pulled in two opposite directions. One, strategy dictates that he must not escalate. Two, politics dictates that he must.

Let’s unpack that. First, consider the strategic imperatives. Ever since both India and Pakistan became nuclear powers, a conventional war has become next to impossible because of the threat of a nuclear war. If India escalates beyond a point, Pakistan might bring their nuclear weapons into play. Even a limited nuclear war could cause millions of casualties and devastate our economy. Thus, no matter what the provocation, India needs to calibrate its response so that the Pakistan doesn’t take it all the way.

It’s impossible to predict what actions Pakistan might view as sufficient provocation, so India has tended to play it safe. Don’t capture territory, don’t attack military assets, don’t kill civilians. In other words, surgical strikes on alleged terrorist camps is the most we can do.

Given that Pakistan knows that it is irrational for India to react, and our leaders tend to be rational, they can ‘bleed us with a thousand cuts’, as their doctrine states, with impunity. Both in 2001, when our parliament was attacked and the BJP’s Atal Bihari Vajpayee was PM, and in 2008, when Mumbai was attacked and the Congress’s Manmohan Singh was PM, our leaders considered all the options on the table—but were forced to do nothing.

But is doing nothing an option in an election year?

Leave strategy aside and turn to politics. India has been attacked. Forty soldiers have been killed, and the nation is traumatised and baying for blood. It is now politically impossible to not retaliate—especially for a PM who has criticized his predecessor for being weak, and portrayed himself as a 56-inch-chested man of action.

I have no doubt that Modi is a rational man, and knows the possible consequences of escalation. But he also knows the possible consequences of not escalating—he could dilute his brand and lose the elections. Thus, he is forced to act. And after he acts, his Pakistan counterpart will face the same domestic pressure to retaliate, and will have to attack back. And so on till my home in Versova is swallowed up by a nuclear crater, right?

Well, not exactly. There is a way to resolve this paradox. India and Pakistan can both escalate, not via military actions, but via optics.

Modi and Imran Khan, who you’d expect to feel like the loneliest men on earth right now, can find sweet company in each other. Their incentives are aligned. Neither man wants this to turn into a full-fledged war. Both men want to appear macho in front of their domestic constituencies. Both men are masters at building narratives, and have a pliant media that will help them.

Thus, India can carry out a surgical strike and claim it destroyed a camp, killed terrorists, and forced Pakistan to return a braveheart prisoner of war. Pakistan can say India merely destroyed two trees plus a rock, and claim the high moral ground by returning the prisoner after giving him good masala tea. A benign military equilibrium is maintained, and both men come out looking like strong leaders: a win-win game for the PMs that avoids a lose-lose game for their nations. They can give themselves a high-five in private when they meet next, and Imran can whisper to Modi, “You’re a good spinner, bro.”

There is one problem here, though: what if the optics don’t work?

If Modi feels that his public is too sceptical and he needs to do more, he might feel forced to resort to actual military escalation. The fog of politics might obscure the possible consequences. If the resultant Indian military action causes serious damage, Pakistan will have to respond in kind. In the chain of events that then begins, with body bags piling up, neither man may be able to back down. They could end up as prisoners of circumstance—and so could we.

***

Also check out:

Why Modi Must Learn to Play the Game of Chicken With Pakistan—Amit Varma
The Two Pakistans—Episode 79 of The Seen and the Unseen
India in the Nuclear Age—Episode 80 of The Seen and the Unseen

The India Uncut Blog © 2010 Amit Varma. All rights reserved.
Follow me on Twitter.

This is the 21st installment of The Rationalist, my column for the Times of India.

When all political parties agree on something, you know you might have a problem. Giriraj Singh, a minister in Narendra Modi’s new cabinet, tweeted this week that our population control law should become a “movement.” This is something that would find bipartisan support – we are taught from school onwards that India’s population is a big problem, and we need to control it.

This is wrong. Contrary to popular belief, our population is not a problem. It is our greatest strength.

The notion that we should worry about a growing population is an intuitive one. The world has limited resources. People keep increasing. Something’s gotta give.

Robert Malthus made just this point in his 1798 book, An Essay on the Principle of Population. He was worried that our population would grow exponentially while resources would grow arithmetically. As more people entered the workforce, wages would fall and goods would become scarce. Calamity was inevitable.

Malthus’s rationale was so influential that this mode of thinking was soon called ‘Malthusian.’ (It is a pejorative today.) A 20th-century follower of his, Harrison Brown, came up with one of my favourite images on this subject, arguing that a growing population would lead to the earth being “covered completely and to a considerable depth with a writhing mass of human beings, much as a dead cow is covered with a pulsating mass of maggots.”

Another Malthusian, Paul Ehrlich, published a book called The Population Bomb in 1968, which began with the stirring lines, “The battle to feed all of humanity is over. In the 1970s hundreds of millions of people will starve to death in spite of any crash programs embarked upon now.” Ehrlich was, as you’d guess, a big supporter of India’s coercive family planning programs. ““I don’t see,” he wrote, “how India could possibly feed two hundred million more people by 1980.”

None of these fears have come true. A 2007 study by Nicholas Eberstadt called ‘Too Many People?’ found no correlation between population density and poverty. The greater the density of people, the more you’d expect them to fight for resources – and yet, Monaco, which has 40 times the population density of Bangladesh, is doing well for itself. So is Bahrain, which has three times the population density of India.

Not only does population not cause poverty, it makes us more prosperous. The economist Julian Simon pointed out in a 1981 book that through history, whenever there has been a spurt in population, it has coincided with a spurt in productivity. Such as, for example, between Malthus’s time and now. There were around a billion people on earth in 1798, and there are around 7.7 billion today. As you read these words, consider that you are better off than the richest person on the planet then.

Why is this? The answer lies in the title of Simon’s book: The Ultimate Resource. When we speak of resources, we forget that human beings are the finest resource of all. There is no limit to our ingenuity. And we interact with each other in positive-sum ways – every voluntary interactions leaves both people better off, and the amount of value in the world goes up. This is why we want to be part of economic networks that are as large, and as dense, as possible. This is why most people migrate to cities rather than away from them – and why cities are so much richer than towns or villages.

If Malthusians were right, essential commodities like wheat, maize and rice would become relatively scarcer over time, and thus more expensive – but they have actually become much cheaper in real terms. This is thanks to the productivity and creativity of humans, who, in Eberstadt’s words, are “in practice always renewable and in theory entirely inexhaustible.”

The error made by Malthus, Brown and Ehrlich is the same error that our politicians make today, and not just in the context of population: zero-sum thinking. If our population grows and resources stays the same, of course there will be scarcity. But this is never the case. All we need to do to learn this lesson is look at our cities!

This mistaken thinking has had savage humanitarian consequences in India. Think of the unborn millions over the decades because of our brutal family planning policies. How many Tendulkars, Rahmans and Satyajit Rays have we lost? Think of the immoral coercion still carried out on poor people across the country. And finally, think of the condescension of our politicians, asserting that people are India’s problem – but always other people, never themselves.

This arrogance is India’s greatest problem, not our people.

The India Uncut Blog © 2010 Amit Varma. All rights reserved.
Follow me on Twitter.

This is the 24th installment of The Rationalist, my column for the Times of India.

Back in the last decade, I was a cricket journalist for a few years. Then, around 12 years ago, I quit. I was jaded as hell. Every game seemed like déjà vu, nothing new, just another round on the treadmill. Although I would remember her fondly, I thought me and cricket were done.

And then I fell in love again. Cricket has changed in the last few years in glorious ways. There have been new ways of thinking about the game. There have been new ways of playing the game. Every season, new kinds of drama form, new nuances spring up into sight. This is true even of what had once seemed the dullest form of the game, one-day cricket. We are entering into a brave new world, and the team leading us there is England. No matter what happens in the World Cup final today – a single game involves a huge amount of luck – this England side are extraordinary. They are the bridge between eras, leading us into a Golden Age of Cricket.

I know that sounds hyperbolic, so let me stun you further by saying that I give the IPL credit for this. And now, having woken up you up with such a jolt on this lovely Sunday morning, let me explain.

Twenty20 cricket changed the game in two fundamental ways. Both ended up changing one-day cricket. The first was strategy.

When the first T20 games took place, teams applied an ODI template to innings-building: pinch-hit, build, slog. But this was not an optimal approach. In ODIs, teams have 11 players over 50 overs. In T20s, they have 11 players over 20 overs. The equation between resources and constraints is different. This means that the cost of a wicket goes down, and the cost of a dot ball goes up. Critically, it means that the value of aggression rises. A team need not follow the ODI template. In some instances, attacking for all 20 overs – or as I call it, ‘frontloading’ – may be optimal.

West Indies won the T20 World Cup in 2016 by doing just this, and England played similarly. And some sides began to realise was that they had been underestimating the value of aggression in one-day cricket as well.

The second fundamental way in which T20 cricket changed cricket was in terms of skills. The IPL and other leagues brought big money into the game. This changed incentives for budding cricketers. Relatively few people break into Test or ODI cricket, and play for their countries. A much wider pool can aspire to play T20 cricket – which also provides much more money. So it makes sense to spend the hundreds of hours you are in the nets honing T20 skills rather than Test match skills. Go to any nets practice, and you will find many more kids practising innovative aggressive strokes than playing the forward defensive.

As a result, batsmen today have a wider array of attacking strokes than earlier generations. Because every run counts more in T20 cricket, the standard of fielding has also shot up. And bowlers have also reacted to this by expanding their arsenal of tricks. Everyone has had to lift their game.

In one-day cricket, thus, two things have happened. One, there is better strategic understanding about the value of aggression. Two, batsmen are better equipped to act on the aggressive imperative. The game has continued to evolve.

Bowlers have reacted to this with greater aggression on their part, and this ongoing dialogue has been fascinating. The cricket writer Gideon Haigh once told me on my podcast that the 2015 World Cup featured a battle between T20 batting and Test match bowling.

This England team is the high watermark so far. Their aggression does not come from slogging. They bat with a combination of intent and skills that allows them to coast at 6-an-over, without needing to take too many risks. In normal conditions, thus, they can coast to 300 – any hitting they do beyond that is the bonus that takes them to 350 or 400. It’s a whole new level, illustrated by the fact that at one point a few days ago, they had seven consecutive scores of 300 to their name. Look at their scores over the last few years, in fact, and it is clear that this is the greatest batting side in the history of one-day cricket – by a margin.

There have been stumbles in this World Cup, but in the bigger picture, those are outliers. If England have a bad day in the final and New Zealand play their A-game, England might even lose today. But if Captain Morgan’s men play their A-game, they will coast to victory. New Zealand does not have those gears. No other team in the world does – for now.

But one day, they will all have to learn to play like this.

The India Uncut Blog © 2010 Amit Varma. All rights reserved.
Follow me on Twitter.

Designers have long recognized the need to analyze the reliability of ICs. Two commonly used approaches for performing reliability analysis include calculating the change in device degradation and relying on safe operating checks in circuit simulators. 

With the advent of the ever-increasing use of ICs in mission-critical applications, the need for reliable reliability analysis has become of paramount importance. Over the years, you have been using reliability analysis in Virtuoso ADE Assembler and Virtuoso ADE Explorer to measure and review aging effects, such as device characteristic degradations, model parameter changes, self-heating effects, and so on.

Reliability analysis can be performed using two modes: Spectre native and RelXpert. The reliability analysis analyzes the effect of time on circuit performance drift and predicts the reliability of designs in terms of performance. In ADE Assembler, you can run the reliability simulation for fresh test (when time is zero), stress test (to generate degradation data), and aged test (at specific intervals, such as one year, three years, or 10 years). In the stress test, extreme environmental conditions are used to stress devices before aging analysis.

The following figure shows the reliability simulation flow.

The Reliability Options form has the following four tabs: 

• Basic: Enables you to specify analysis type, aging options, start and stop time of reliability simulation, and options related to device masking, degradation ratio, and lifetime calculation. 

• Modeling: Enables you to choose the modeling type you want to use during reliability simulation. 

• Degradation: Enables you to specify the options to print device and subcircuit degradation information into a .bt0 file. 

• Output: Enables you to specify the degradation reports to be generated and methods to filter degradation results in the reports.

While the Basic and the Output tabs are used by design engineers, the Modeling and the Degradation tabs are primarily used by model developers.

Reviewing degradation reports in text or XML formats can be a tiresome exercise because degradation data can be large and can contain a large number of instances due to advanced technology nodes and post-layout simulations. For you to work effectively and interactively with these reports, the new reliability report is based on the SQLite database, which adds the benefit of improved performance and capabilities of sorting and filtering reliability data using SQLite operators.

As they say, watching this in action might help you more than reading about it, so please take a look at our Training Bytes video channel, which offers many helpful videos on how to run Reliability Analysis in Virtuoso Studio.

All the related videos are linked together in a channel so that you can easily access and watch as many as you like.

Reliability Analysis in Virtuoso Studio

Want to Learn More?

For lab instructions and a downloadable design, enroll for the online training courses of your interest on

Reliability Analysis in Virtuoso Studio vIC23.1 (Online)

 Training is also available as "Blended" or "live" class.

Digital Badge Available

You can become Cadence Certified once you complete the course (s) and share your knowledge and certifications on social media channels. Go straight to the course exam at the Learning and Support Portal.

Note: Some of the above links are accessible only to Cadence customers who have a valid login ID for the Cadence Learning and Support Portal.

Do You Have Access to the Cadence Support Portal?

If not, follow the steps below to create your account.

• On the Cadence Support portal, select Register Now and provide the requested information on the Registration page.
• You will need an email address and host ID in order to sign up.
• If you need help with registration, contact support@cadence.com.

To stay up-to-date with the latest news and information about Cadence training and webinars, subscribe to the Cadence Training emails.

If you have questions about courses, schedules, online, public, or live onsite training, reach out to us at Cadence Training.

Related Resources

About Knowledge Booster Training Bytes

Knowledge Booster Training Bytes is an online journal that relays information about Cadence Training videos, online courses, and upcoming webinars that are available in the Learning section of the Cadence Learning and Support portal. This blog category brings you direct links to these videos, courses, and other related material on a regular basis.

Niyati Singh

On behalf of the Cadence Training team

During a mixed-signal simulation, the analog engine usually dominates the simulation time and resources. If you need to run only the analog engine in several windows, or if you would like to to run multiple tests of the same circuit with different stimuli or test pattern, then you need to run the simulation multiple times. View this blog to know more about the the two advanced technologies that Spectre AMS Designer provides to help you improve the efficiency of your mixed-signal designs and to increase the simulation speed.(read more)

Read this blog to know how you can easily create and insert connect modules using Spectre AMS Designer with the Verilog-AMS standard language defined by Accellera. (read more)