Hi,

I have a monitor plugged to my laptop using a HDMI to USB adapter. When using this adapter, Allegro runs very slowly. It seems that it is not using my video card.

Is this a known issue with a workaround I can try?

Thanks,

Michael

Allegro part of DPI does not support scaling above 150%

Hello All,

I'm a novice to this forum and probably this subject has been already discussed here.

My company has purchased OrCAD Capture 17.4 tools that have a new GUI if compared to my earlier used OrCAD Capture 9.2. I have been using Capture 9.2 for ~18 years and its GUI is really convenient. The GUI of 17.4 looks to be a modern one with new icons and really has improved features and new capabilities.

However, my main complain about GUI 17.4 is that the schematic windows cannot be cascaded. Although they can be set floating, this is even more annoying because all toolbars remain in the Capture window and when you select a tool, the Capture window pops over already open schematic window and you need a lot of useless extra clicks to return back to the currently edited schematic page. I always used cascading of schematic windows before because my complex designs includes many pages, not speaking about the library windows that are typically open simulatneously. My view is that the lack of CASCADING in Capture GUI 17.4 is critical and unacceptable for complex projects, and I would very highly appreciate if the Cadence guys will return back the CASCADING capability for schematic pages. In case this will be done, this will make the GUI really great and comfortable to use.

Does anybody have opinion on this issue?

Many thanks,

Pavel

Hi,

I have a question about printing noise summary via maestro output expressions.

How can I print noise data using output expressions, for multiple levels of the hierarchy?

I have found this article which describe the procedure using ocnGenNoiseSummary() function: https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1Od0000007MViHEAW&pageName=ArticleContent

I see also Andrew Beckett referring to the above mentioned article as a solution to a similar question: community.cadence.com/.../noise-summary-per-instance

However, this seems to work only if I'm to extract noise data from a single level of hierarchy.

If I have the output expression "ocnGenNoiseSummary(2 ?result 'hbnoise)", it will generate a "noisesummary" directory under results directory for a hierarchy level of 2.

If I am to extract data from various hierarchy levels, I should be able to generate multiple noise summary directories, such as noisesummary1, noisesummary2 where they correspond to "ocnGenNoiseSummary(1 ?result 'hbnoise)" & "ocnGenNoiseSummary(2 ?result 'hbnoise)", respectively. However this does not seem to be possible.

Can you please advice? Thanks.

My Cadence version: IC23.1-64b.ISR7.27

BR,

Denizhan Karaca

I have tried replicating the setup described in a previous post (here), with the proposed solution.

The MDL measurements return a value of 0 for all exported result but the first.

Using Viva I can actually see the correct value for each contribution.

I am using :
- Spectre 23.1.0.538.isr10
- Viva IC23.1-64b.ISR8.40

What should I do differently?

Thanks!

**** test.measure ****

Measurement Name   :  noi_test
Analysis Type      :  noise
noi_total             =  6.9282e-06
r1_flicker            =  0
r1_thermal            =  0
r1_total              =  0
r2_flicker            =  0
r2_thermal            =  0
r2_total              =  0

I need to include Verilog-A files which live outside the Cadence ecosystem (i.e., they are not in veriloga views but rather are just text files) into a veriloga view. These external modules are not compatible with OA (parametized port widths) so I can't put them into cellviews and hook them together using schematics.

Example: I have a cellview "test" which has a symbol and veriloga view. I have three "externaI" modules mod1 (inside an external file mod1.va),  mod2 (inside an external file mod2.va),  and mod3 (inside an external file mod3.va). I instantiate one instance of each module in "module test". The three modules have some parametized ports which are interconnected by parameterized signals p1 and p2. These two signals are strictly local to the module.

At the bottom of the module I use "`include mod1.va", "`mod2.va", etc.

When I check and save test->veriloga it checks all the included modules as well as the "test" module. However, I get a warning:

Warning from spectre during AHDL compile.
WARNING (VACOMP-1047): The Verilog-A file contains more than one module
definition. ADE can process only one module per Verilog-A file. Put
only one module in each Verilog-A file so that ADE can identify pin
names, directions, and hierarchy within each separate module.

Is this just a SUGGESTION that I can safely ignore, or are my included modules going to be ignored?

Hello Everybody

Recently, I want to design a high output Power Amplifier at 2.4GHz using TSMC 1P6M CMOS Bulk Process. I use its nmos_rf_25_6t transistor model to determine the approximate mosfet size

I use the most common Common-Source Differential Amplifier topology with neutralizing capacitor to improve its stability and power gain performance

Because I want to output large power, the size of mosfet is very large, the gate width is about 2mm, when I perform harmonic balance analysis, everything is alright, the OP1dB is about 28dBm (0.63Watt)

But When I perform Transient simulation, the magnitude of voltage and current waveform at the saturation point is too small, for voltgae, Vpeaking is about 50mV, for current, Ipeaking is about 5mA

I assume some reasons: the bsim4 model is not complete/ the virtuoso version is wrong (My virtuoso version is IC6.1.7-64b.500.21)/the spectre version is wrong (spectre version is 15.1.0 32bit)/the MMSIM version is wrong/Transient Simulation setting is wrong (the algorithm is select gear2only, but when I select other, like: trap, the results have no difference), the maxstep I set 5ps, minstep I set 2ps to improve simulation speed, I think this step is much smaller than the fundamental period (1/2.4e9≈416ps)

I have no idea how to solve this problem, please help me! Thank you very very much!

Hi

I have a rather strange question - is there a way to tell layout XL to NOT place the error/warning markers on a design when I open a cell?  I do a lot of my layout by using arrays from placed instances and create mosaics that completely ignore the metadata that Layout XL uses with its bindings with schematic (and instances get deleted etc. but I do like using it to generate all my pins etc.) and it's just really annoying when I open a design that I know is LVS clean and since the connectivity metadata is all screwed up (because I did not use it to actually complete the layout) I have a design that's just blinking at me at every gate, source and drain.  I typically delete them at the high level heirarchically but the second I go in and modify something and come back up it places all of them again.  I know that if I flatten all the p cells it goes away but sometimes it's nice to have that piece of metadata but that's about it.  Is there a way to "break" the features of XL like this?  I realize what a weird question this is but it's becoming more of an issue since we moved to IC 23 from IC 6 where there is no longer a layout L that I can use free from these annoyances that can't use any of the connectivity metadata.

Thanks

Chris

Hello all,

I have run a simulation with a lot of instnaces extraction and the psf.trn is >= 200 Gb, I tried to load it with simvision and it just breaks.

I would like to ask if there is a way to open this file, e.g. if I could read only some time window e.g. from 10us -> 15us.

getVersion(t)
"sub-version  ICADVM20.1-64b.500.34 "

XCELIUMMAIN23.03.001

thank you in advance

I'm trying to use Jasper for checking parameter propagation in a large design. I have a list of top-level parameters, each with a HDL path of a module parameter somewhere lower in the hierarchy that's supposed to receive its value from the top-level module. The FPV app seems like an excellent tool for this, but elaborating the entire design in it is extremely time-consuming and memory-intensive. So, I'm trying to black-box everything but the interesting HDL paths. I thought using `elaborate -top dut_module_name -bbox_i * -no_bbox_i inst_foo -no_bbox_i inst_bar (...)` would work, but it doesn't. Jasper just starts flooding the log with warnings from modules that are definitely not on the whitebox list, and eventually dies due to insufficient memory. When I use -bbox_m * it correctly elaborates the top-level module with all of its sub-modules black-boxed. But then the -no_bbox_i switches have no effect. Could anyone suggest a working solution for this use case?

I'm completely new to Cadence. I've been able to run a very simple simulation with the -gui option. Simvision opens, I add the variables to the waveform viewer, and press run. All is good.

I don't understand the flow when using the -nogui option. It appears that the simulation runs and returns control to the OS. When I launch Simvision, is there a database or file that I can open to display the already-simulated data?

My command is of the form:

xrun -gui -64bit -sv -access +rwc -top tb_top.sv <src files>

I exported vplan to .odf file in vManager and after editing it I imported it to vManager. The vplan was expected to be synchronized and updated. However, nothing has changed to it. Does anyone know why?

Hello,

I have a question about toggle coverage.

In my case, there are many unused registers or wires that are affecting the toggle coverage score negatively.

Is it possible to automatically exclude registers or wires that are not used from toggle coverage?

My RTL code is as follows, Is it possible to automatically disable tb.top1.b and tb.top1.c without using an exclude file?

module top1;

  reg a;

  reg b;

  reg [31:0] c;

  initial

  begin

  #1 a=1'b0;

  #1 a=1'b1;

  #1 a=1'b0;

  end

endmodule

module tb;

  top1 top1();

endmodule

Hello All,

starting with version 8.1 the contents of the ce_tools directory will no longer
be shipped with Specman. The directory contains some unsupported AE/R&D
ware and has not been updated for several releases (i.e. most of those old
packages don't work with the latest release).
 
Attached is the contents of this directory. Please read the README before
using any of the packages.


Regards,
-hannes

Using the EMX solver, X-FAB design engineers can efficiently develop next-generation RF technology for the latest communication standards (including sub-6GHz 5G, mmWave, UWB, etc.), which are enabling technologies for communications and electric vehicle (EV) wireless applications. (read more)

The Sigrity and Systems Analysis (SIGRITY/SYSANLS) 2022.1 HF2 release is now available for download at Cadence Downloads. For the list of CCRs fixed in the 2022.1 HF2 release, see the README.txt file in the installation hierarchy.(read more)

Microwaves & RF's David Maliniak interviews Sherry Hess of Cadence about recently announced products of Optimality and OnCloud.(read more)

Hi,

My Virtuoso and Spectre Version: ICADVM20.1-64b.NYISR30.2

I have an expression where the EvalType is "sweeps". Here is the expression (I also attached the snapshot):

(peakToPeak(leafValue(swapSweep(delay(?wf1 clip((VT("/clk0") - VT("/clk180")) (VAR("mt_stop") - (4.0 / VAR("datarate"))) VAR("mt_stop")) ?value1 0 ?edge1 "rising" ?nth1 1 ?td1 0 ?tol1 nil ?wf2 clip((VT("/tx_padp") - VT("/tx_padn")) (VAR("mt_stop") - (4.0 / VAR("datarate"))) VAR("mt_stop")) ?value2 0 ?edge2 "rising" ?nth2 1 ?tol2 nil ?td2 nil ?stop nil ?multiple nil) "VDD_FIXED_NOISE") "VREGLN_cmode" 0.85 "VREGDRV_novn" 0.4 "datarate" 1.658e+10) ?overall t) / 10.0)

What this expression does is that it compares the delay between the output data with respect to a reference clock. I then get this information for two conditions (VDD_FIXED_NOISE = 0 or 10mV) to get the effect of the supply-induced jitter. In the expression, I need to give the value of each parameter in different modes to distinguish them from each other. Now I want to sweep the base supply values and see the supply variation effects. For example, I want to change VREGLN_cmode from 0.85 to 0.81 and see how my supply-induced jitter changes. For that, the hard way is to copy the expression and change that value accordingly (e.g. "VREGLN_cmode" 0.81). I'm looking for an easier way to use a variable in the expression. Something like VAR("VREGLN_Sweep"). But I see it doesn't work in my expression and it gives an eVal error. I tested this before in other expressions (not sweep type) and it always worked. I have only one test and these variables are all Design Variables and not Global variables.
I want to know what mistake am I doing here and is there a way to make this work. Sorry that if I could not explain better my inquiry. Thank you.

Hello Everybody

Recently, I want to design a high output Power Amplifier at 2.4GHz using TSMC 1P6M CMOS Bulk Process. I use its nmos_rf_25_6t transistor model to determine the approximate mosfet size

I use the most common Common-Source Differential Amplifier topology with neutralizing capacitor to improve its stability and power gain performance

Because I want to output large power, the size of mosfet is very large, the gate width is about 2mm, when I perform harmonic balance analysis, everything is alright, the OP1dB is about 28dBm (0.63Watt)

But When I perform Transient simulation, the magnitude of voltage and current waveform at the saturation point is too small, for voltgae, Vpeaking is about 50mV, for current, Ipeaking is about 5mA

I assume some reasons: the bsim4 model is not complete/ the virtuoso version is wrong (My virtuoso version is IC6.1.7-64b.500.21)/the spectre version is wrong (spectre version is 15.1.0 32bit)/the MMSIM version is wrong/Transient Simulation setting is wrong (the algorithm is select gear2only, but when I select other, like: trap, the results have no difference), the maxstep I set 5ps, minstep I set 2ps to improve simulation speed, I think this step is much smaller than the fundamental period (1/2.4e9≈416ps)

I have no idea how to solve this problem, please help me! Thank you very very much!

Che(read more)

The ICADVM20.1 ISR26 and IC6.1.8 ISR26 production releases are now available for download.(read more)

This blog introduces you to an efficient way to debug interface elements or connect modules in a mixed-signal simulation.(read more)

This blog describes how to efficiently use Virtuoso Visualization and Analysis XL.(read more)

The ICADVM20.1 ISR27 and IC6.1.8 ISR27 production releases are now available for download.(read more)

This blog helps in demonstrating the use of Pin to trunk routing style which helps in enhancing the layout experience.(read more)

Which Analysis is Being Performed by Allegro in this Image?

A. Impedance

B. Coupling

C. Crosstalk

D. Return Path

E. Reflection

Simply answer by letter or include any reason to support your answer...

Has anyone experienced the same situation?

Socionext, a leader in SoC design, recently made significant strides in enhancing its design efficiency for a complex billion-gate project. Faced with the initial challenges of lengthy eight-day iterations and a protracted two-month timing signoff process, the objective was to reduce the iteration cycle to just three days. By integrating Cadence's cutting-edge solutions—Certus Closure Solution, Tempus Timing Solution, and Quantus Extraction Solution—Socionext achieved remarkable improvements.

Notably, the Tempus DSTA tool dramatically cut timing closure time by 73%, outperforming conventional single-machine STA methods. This achievement, combined with the synergistic use of Cadence's Certus Closure and Tempus Timing solutions, allowed Socionext to meet their ambitious three-day iteration target and double productivity. Additionally, integrating these solutions significantly decreased both human and machine resource needs, slashing memory and disk costs by up to 90% and halving engineering resources during the optimization and signoff phases.

For more on this collaboration, check out the "Designed with Cadence" success story video on Cadence's website and YouTube channel.

Also, don't miss the on-demand webinar "Fast, Accurate STA for Large-Scale Design Challenges," which provides a deeper dive into Socionext's breakthroughs and the innovative solutions that powered their success.

Designing 3D-ICs with integrity involves a commitment to ethical practices, reliability, and sustainability throughout the design and manufacturing process. This includes using environmentally friendly materials, ensuring robust and efficient performance, and incorporating thorough testing and verification. By prioritizing transparency, responsibility, and long-term sustainability, designers can create advanced integrated circuits that meet high standards of quality and social responsibility.

Start Learning Now!

Start with our Designing with Integrity 3D-IC online course, which introduces Integrity 3D-IC, the industry's first comprehensive, high-capacity 3D-IC platform that integrates 3D design planning, implementation, and system analysis in a single, unified environment. You will be guided through the following activities involved in designing a silicon interposer with a digital ASIC and HBM2 interface in a 2.5D configuration.

• You will design the interposer from scratch in the new Integrity System Planner and the Integrity 3D-IC implementation environment.
• You will examine the ASIC and interposer designs using some of the new 3D-IC multi-die design features.
• You will route the interposer using some of the new advanced routing capabilities with NanoRoute

—and this in only two days!

WATCH VIDEO

Interested? Get an overview in less than two minutes.

Are you primarily interested in selected snippets instead? Then, take our Training Bytes, which—like the online training course—are available to Cadence customers for free 24/7 in the Cadence Learning and Support portal.

Cadence Training Services now offers free Digital Badges for all popular online training courses. These badges indicate proficiency in a certain technology or skill and give you a way to validate your expertise to managers and potential employers. You can add the digital badge to your email signature or any social media channels, such as Facebook or LinkedIn, to highlight your expertise.

To find out more, see the blog post. It’s the Digital Era; Why Not Showcase Your Brand Through a Digital Badge!

Related Resources

• 3D-IC Introduction (Video)
• 3D-IC Development Process With Challenges. (Video)
• Demo: How to Create the Interposer Contact Pads and Die Connectivity Using the Integrity 3D-IC? (Video)
• Demo: How To Pull The Interposer Design From System Planner Into Integrity 3D-IC Layout? (Video)
• Demo: Routing The Interposer Design Using The Integrity 3D-IC Layout_Part 1 (Video)
• Demo: Routing The Interposer Design Using The Integrity 3D-IC Layout_Part 2 (Video)
• Demo: How To Create C4 Bumps For NC Connections And Generating C4 Dummy Cover Bumps In Integrity 3D-IC? (Video)

Related Blogs

• How Cadence Is Expanding Innovation for 3D-IC Design
• Training Bytes: They May Be Shorter, But the Impact Is Stronger!
• Training Insights — 3D-IC: What Is Silicon Interposer?
• System Analysis Knowledge Bytes: What’s New in the Clarity 3D Solver Course
• System Analysis Knowledge Bytes - Early System-Level Thermal Analysis
• 3D-IC: The Future of Integrated Electronics Is the Future of Electronics Itself

Related Trainings

• OrbitIO System Planner
• Allegro Package Designer Plus

In an era of abundant and constantly evolving information, the challenge is not just accessing knowledge but understanding and applying it effectively. AI is a transformative technology that is reshaping how we learn, work, and grow. In this blog, we’ll explore how AI accelerates our knowledge acquisition and understand how it can relate to the process of learning, which connects with our daily lives.

The role of AI is to accelerate knowledge by personalizing learning experiences, providing instant access to information, and offering data-driven insights. AI empowers us to learn more efficiently and effectively in many ways. I won't go into much detail, as we are already busy searching for the meaning of AI and what it can do; however, I want to share one inspiring fact about AI. It can analyze vast amounts of data in seconds, making sense of complex information and providing instantaneous actionable insights or concise answers. I understand that humans are looking to speed up things, which can help us understand technology better and perform our tasks faster.

The main reason AI is in focus is because of its ability to perform tasks faster than ever. We aim to enhance the performance of all our products, including the everyday household electronic items we use. Similarly, are we striving to accelerate the learning process? I am committed to assisting you, and one such method is concise, short (minute-long) videos.

In today's fast-paced world, where attention spans are shorter than ever, the rise of social media platforms has made it easier for anyone to create and share short videos. This is where minute videos come in. These bite-sized clips offer a quick and engaging way to deliver information to the audience with a significant impact. Understanding the definitions of technical terms in VLSI Design can often be accomplished in just a minute.

Below are the definitions of the essential stages in the RTL2GDSII Flow. For further reference, these definitions are also accessible on YouTube.

Want to Learn More?

The Cadence RTL-to-GDSII Flow training is available as both "Blended" and "Live" Please reach out to Cadence Training for further information.

And don't forget to obtain your Digital Badge after completing the training!

• You can check out a free Online Version of the training above, which is available 24/7 for all customers with a Cadence Learning ans Support Portal
• You will also have access to our Training Byte Library then which is full of hundres of troubleshooting videos, like the following: What is Digital Implementation?
• You can find more instructions how to get the best out of the Portal in this blog.
• If you would like to stay up-to-date with the latest news and information about Cadence trainings and webinars, subscribe to the Cadence Training emails.

Related Blogs

Training Insights – Why Is RTL Translated into Gate-Level Netlist?

Did You Miss the RTL-to-GDSII Webinar? No Worries, the Recording Is Available!

It’s the Digital Era; Why Not Showcase Your Brand Through a Digital Badge!

Binge on Chip Design Concepts this Weekend!

This blog informs about the new badge certification available for Cadence Certus Closure Solution, that grants credit to your proficiency.(read more)

Cyprus is ranked first in fDi’s Island Economies of the Future rankings, followed by the Dominican Republic and Sri Lanka. Cathy Mullan and Naomi Davies detail the results.

Russia remains fDi’s most diversified commodity economy, while second ranked Brazil has displaced Ukraine into third place. Cathy Mullan reports.

Emerging states must re-orientate their investment efforts to increasingly target those with an outsized social impact

Egypt is well on the way to establishing a diversified economy, claims Hala El Saeed, minister of planning and economic development 

Combining a strategic location with an investor-friendly environment, Egypt is ensuring its Suez Canal Economic Zone is primed for foreign investment. 

Sustainability is gaining traction in the creative industries, with the Italian region of Trentino designing a film production rating protocol that is being considered by the EU.

North Rhine-Westphalia is fDi's top large region for FDI Strategy, with the Basque Country topping the table for mid-sized regions and Ireland South East first among small regions. 

Marcus Weldon, chief technology officer of Nokia and president of its research arm Nokia Bell Labs, talks about what guided the decision to set up a new global R&D centre and the company’s strategy for driving innovation

The social turmoil in Hong Kong has triggered an economic crisis, raising questions over the special administrative region’s future as a major financial hub on mainland China’s doorstep. 

We are currently in a state of heightened business and economic disruption and sociopolitical activism, which only looks set to intensify. 

The trend towards the vetting of foreign investment, especially projects that involve advanced technology and national data or pose potential security threats, is on the rise. David Gabathuler and Matthew T West give a trans-Atlantic perspective.

The Eastern Caribbean Central Bank is to launch a digital currency for the benefit of its dispersed island economies – essential to a region that has been disproportionately affected by climate change-induced disasters, governor Timothy Antoine tells fDi.

While governments grow more protectionist over trade and physical borders, companies such as Microsoft are bridging the gap by funding international collaborative enterprises.

The pandemic is likely to hit the Middle East’s more fragile countries hardest.

Mazda CX-50 Hybrid gets its 38-mpg powertrain from Toyota Styling and packaging is mostly unchanged, price is $2,550 to $3,400 more than non-hybrid Lacks much of the engaging, responsive driving experience that's distinguished Mazda Among mainstream, gasoline-fueled vehicles, with only a few exceptions, our advice to most shoppers is simple: If...

As the Digital Kazakhstan programme creates an environment conducive to innovation, start-up hubs are springing up across the country. Their task? To move the economy beyond commodities and make the country a regional centre of innovation. 

Antwerp’s vice-mayor, Claude Marinower, talks about the city's history as a diverse business location, and its plans to promote traditional industries alongside innovative concepts.

With a multilingual population, Antwerp enjoys a diverse talent pool that has made it a popular testbed for digital innovation and entrepreneurship.

Global FDI in the biotechnology sector has witnessed year-on-year increase since 2015.