The video features models dressed in the latest fashion, strutting like mannequins on a moving runway outside the designer store ITIB.

The $20 Merry Multiplier scratch-off ticket she chose turned out to be a $250,000 top prize winner.

The couple, together for nine years, had announced the wedding date in January and were eagerly looking forward to their long-awaited special day.

The post has sparked a heated debate about Bengaluru's rising rental prices and the need for a cap on deposits.

IFTTT (If This Than That), a web-based software that automates and connects over 600 online services/software raised a $24M Series C led by Salesforce. Other investors include IBM and the Chamberlain Group and Fenox Venture Capital.

The latest round brings IFTTT’s funding to $63M and it will use the funding proceeds to provide integration for enterprise and IoT services and hiring. In IFTTT’s platform, applets are code/script users need to deploy to integrate two or more services (such Google Drive’s integration with Twitter/Facebook).

Investment in IFTTT reveals that Salesforce is consolidating its presence in enterprise IoT space. It also acquired Mulesoft, an integration platform that rivals Microsoft’s BizTalk.

IBM’s investment in IFTTT is also noteworthy as the former is pushing its IBM Watson IoT platform. The following statement also shows its keen interest in IFTTT.

Other recent investments in IoT companies include $30M Series B of Armis and Myriota's $15M for its IoT satellite-based connectivity platform.

For latest IoT funding and product news, please visit our IoT news section.

Vesper, the maker of piezoelectric sensors used in microphone production and winner of CES Innovation Award 2018 raised a $23M Series B round. American Family Ventures led the investment with participation from Accomplice, Amazon Alexa Fund, Baidu, Bose Ventures, Hyperplane, Sands Capital, Shure, Synaptics, ZZ Capital and some undisclosed investors.

Vesper’s innovative sensors can be used in consumer electronics like TV remote controls, smart speakers, smartphones, intelligent sensor nodes, and hearables. The company will use the funding proceeds to scale-up its functions like mass production of its microphones and support expanded research and development, hiring, and establishing international sales offices.

The main product of Vesper is VM1000, a low noise, high range,single-ended analog output piezoelectric MEMS microphone. It consists of a piezoelectric sensor and circuitry to buffer and amplify the output.

The hot-selling product of Vesper is VM1010 with ZeroPower Listening which is the first MEMS microphone that enables voice activation to battery-powered consumer devices.

The unique selling point of Vesper’s products is they are built to operate in rugged environments that have dust and moisture.

"Vesper's ZeroPower Listening capabilities coupled with its ability to withstand water, dust, oil, and particulate contaminants enables users that have never before been possible," said Katelyn Johnson, principal of American Family Ventures. "We are excited about Vesper's quest to transform our connected world, including IoT devices."

Other recent funding news include $24 raised by sensor-based baby sock maker Owlet, IFTTT banks $24M from Salesforce to scale its IoT Enterprise offering, and Intel sells its Wind River Software to TPG.

Microsoft announced it has acquired Semantic Machines, a conversational AI startup providing chatbots and AI chat apps founded in 2014 having $20.9 million in funding from investors. The acquisition will help Microsoft catch up with Amazon Alexa, though the latter is more focused on enabling consumer applications of conversational AI.

Microsoft will use Semantic Machine’s acquisition to establish a conversational AI center of excellence in Berkeley to help it innovate in natural language interfaces.

Microsoft has been stepping up its products in conversational AI. It launched the digital assistant Cortana in 2015, as well as social chatbots like XiaoIce. The latest acquisition can help Microsoft beef up its ‘enterprise AI’ offerings.

As the use of NLP (natural language processing) increases in IoT products and services, more startups are getting traction from investors and established players. In June last year, Josh.ai, avoice-controlled home automation software has raised $8M.

Followed by it was SparkCognition that raised $32.5M Series B for its NLP-based threat intelligence platform.

It appears Microsoft’s acquisition of Semantic Machines was motivated by the latter’s strong AI team. The team includes technology entrepreneur Daniel Roth who sold his previous startups Voice Signal Technologies and Shaser BioScience for $300M and $100M respectively. Other team members include Stanford AI Professor Percy Liang, developer of Google Assistant Core AI technology and former Apple chief speech scientist Larry Gillick.

Arduino’s MKR family of products got two new wireless connectivity boards added to its range of products. These include MKR WiFi 1010 and MKR NB 1500, both aimed at streamlining IoT product/service development.

Arduino’s blog notes that “the Arduino MKR WiFi 1010 is the new version of the MKR1000 with ESP32 module on board made by U-BLOX.”

MKR WiFi 1010: For prototyping of WI-FI based IoT applications

The core difference of MKR WiFi 1010 compared to MKR WiFi 1000 is that the former can be put to use in production-grade IoT apps and it has ESP32-based module manufactured by u-blox. The former enables to add 2.4GHz WiFi and Bluetooth capability to the application. Additionally, it comes with a programmable dual-processor system (an ARM processor and a dual-core Espressif IC).

MKR NB 1500: For on-field monitoring systems and remote-controlled LTE-enabled modules

The Arduino MKR NB 1500 is based on new low-power NB-IoT (narrowband IoT) standard. This makes it appropriate for IoT apps running over cellular/LTE networks.

Key use cases of this board are remote monitoring systems and remote-controlled LTE-enabled modules. It supports AT&T, T-Mobile USA, Telstra, Verizon over the Cat M1/NB1 deployed bands 2, 3, 4, 5, 8, 12, 13, 20 and 28.

Arduino also pitches this board to be used in IoT apps which used to rely on alternative IoT networks such as LoRa and Sigfox. It promises to save power compared to GSM or 3G cellular-based connections.

Siemens Building Technologies division announced it will acquire Enlighted Inc., a smart IoT building technology provider. The transaction is expected to close in Q3’18.

Enlighted Inc.’s core element is an advanced lighting control application. It is based on a patented, software-defined smart sensor that collects and monitors real-time occupancy, light levels, temperatures and energy usage.

The sensor can gauge temperature, light level, motion, energy, and has Bluetooth connectivity.

The Enlighted system works by collecting temperature, light and motion data via its smart sensors. A gateway device carries the information to Energy Manager, a secure browser-based interface to create profiles and adjust settings of the entire Enlighted Advanced Lighting Control System. The Energy manager operates as an analytics device.

The whole system consists of multi-function sensors, distributed computing, a network, and software applications run by Enlighted Inc.

Enlighted Inc.’s main target market is commercial real estate. Key use cases of its intelligent Lighting Control System are energy efficiency, controlling heating, ventilation and air conditioning, and building utilization reports.

Use the Postscapes 'Connected Products Framework' to understand the smart home and buildings eco-system.

EV Ultimo launches platform to assist brands, buyers, stakeholders in the Electric Vehicles ecosystem

[SAPS] Office of the Provincial Commissioner KwaZulu-Natal

[SAPS] - A former company Director (57) is expected to appear in the Thabamoopo Magistrates Court in Lebowakgomo on 11 November 2024 for allegedly defrauding a pensioner an amount of R378 000.00 in the name of business.

[SAPS] - Polokwane based Hawks Serious Commercial Crime Investigation in collaboration with National Traffic Anti-corruption Unit arrested 11 suspects between the ages of 27 and 57 for alleged fraud at various Provinces during operation "SISFIKILE".

[SAPS] - Five suspects are appearing in the Kariega Magistrate's Court today, after they were arrested and found in possession of cycads with an estimated value of R1 Million on Friday 08 November 2024.

[SAnews.gov.za] With the United Nations Framework Convention on Climate Change (COP29) taking place this week, South Africa expects the COP29 Presidency to enhance efforts to finalise the New Collective Quantified Goal on Finance (NCQG), which is a matter of great importance for developing economies.

[Namibian] Russian company Rosatom and South African AllWeld Nuclear and Industrial are joining forces to promote the sustainable development of nuclear energy in Africa.

[spotlight] Highly effective treatments for HIV have existed since the mid-1990s. But while these treatments keep people healthy, we do not yet have a safe and scalable way to completely rid the body of the virus. In this Spotlight special briefing, Elri Voigt takes stock of where we are in the decades-long search for an HIV cure.

[DA] It is a national embarrassment that the inability of the City of Johannesburg to supply water to its residents, business and public sector offices, has now led to the shutdown of operations at the Constitutional Court, on Constitution Hill in Braamfontein.

[GroundUp] The education department says there's only one SETA official assisting all nine provinces

The market is trending towards integrating and stacking multiple chiplets into a single package to meet the growing demands of speed, connectivity, and intelligence.  However, designing and signing off chiplets and packages individually is time-...(read more)

Hi,

Is there any way to instruct the tool to reduce the low metals effort and route more on top layers? 

Hi, I'm using genus (Version 21.14-s082_1) to synthesis a VHDL-design with multiple power-domains. After reading the power intent file and calling 'apply_power_intent',  I get the following warning:

Warning : Potential problem while applying power intent of 1801 file. [1801-99]
: Cannot find any instance for scope '/:CHIP_TOP'. Rest of commands in this scope will be skipped (set_scope:../../upf/CHIP_TOP.upf:2).
: Check the power intent. If the scenario is expected, this message can be ignored.

The fist two lines of CHIP_TOP.upf:

upf_version 3.1
set_scope :CHIP_TOP

I simulated the same  UPF and VHDL files with Xeclium and was able to verify all the IEEE1801/UPF aspects I need without any problems. I don't know, why genus is having a problem with the 'scope'.
In genus, after getting the warning, running 'set_db power_domain:CHIP_TOP/BLOCK_A/PD_CORE_D .library_domain PD0V5' returns the following error:

Error : <Start> word is not recognized. [TUI-182] [set_db]
: 'power_domain:CHIP_TOP/BLOCK/PD_CORE_D' is not a recognized object/attribute. Type 'help root:' to get a list of all supported objects and attributes.
: Check if the given <Start> word is a valid object_type, object or attribute.

Running 'commit_power_intent' gives me:

Started inserting low power cells...
====================================
Info : Command 'commit_power_intent' cannot proceed as there are no power domains present. [CPI-507]
: Design with no power domains is 'design:CHIP_TOP'.
Completed inserting low power cells (runtime 0.00).
====================================================

I'm suspecting that the problem lies in 'set_scope' and VHDL. I never had such problems with Verilog. I tried every way to reference the hierarchy in the code and now I'm at my wit's end and I need your help o/
How to set the scope with 'set_scope' in UPD 3.1 to the toplevel in VHDL, so that genus accepts it? Or is the problem caused by something else?

Best,

Iqbal

Hi all, 

I have made a custom cell in Innovus that I will be instantiating into a bigger block, which I will also be using Innovus to do the Place & Route. 

I understand that I can generate a *.lef file and a *.lib file using Innovus. However, I need to also create a *.db file (these format of files are often used in DC Compiler synthesis tool). 

Is there a way to create the *.db file from Innovus? Or, is there a tool that I can use to create this *.db file? 

Thank you for your time. 

I'm trying to write a generic piece of code that will return the layermap file location, with file name, for a variety of projects (which could potential have different layermap file naming conventions. The below code is what I've used to date, but this assumes the file name is xxxx.layermap. I can obviously do some string matching to find it, assuming the various files all contain some common characters. I thought I'd ask if there is a simpler way to find it, I know that this information is automatically loaded into the Xstream out gui, so maybe I can use the same approach to find it.

techLibName=techGetTechFile(cv)~>libName

techLibLayerMap=strcat(ddGetObj(techLibName)~>readPath "/" techLibName ".layermap")

I have a 2-dimensional input in my design - input [2:0] data_in [15:0]. After synthesis with genus, I got a netlist where the inputs are like data[15], data[14],...,data[0]. And furthermore it has definitions like input [2:0] data[15], .... So how can I define the pin locations of each of the bits for this input? Can I define data[15]'s inner bits like data[15][0]? Is it possible to define this with def files?

Hi! I've made some 1-point waveform "markers" that I want to overlay in my plots to aid visualization (with the added advantage, w.r.t. normal Viva markers, that they update location automatically upon refreshing simulation data).

For example, the plot below shows an spectrum along with two of these markers, which I create with the function "singlePointWave", and the Assembler output definitions also as shown below.

The problem is: as currently created and defined, Assembler is unable to plot these elements. I can send their expressions to the calculator and plotting works from there, BUT ONLY after first enabling the "Allow Any Units" in the target Viva subwindow.

Thus, I suspect Assembler is failing to plot my markers because they "lack" other information like axes units and so on. How could I add whatever is missing, so that these markers can plot automatically from Assembler?

Thanks in advance for any help!

Jorge.

P.S. I also don't know why, but nothing works without those "ymax()" in the output definitions--I suspect they are somehow converting the arguments to the right data type expected by singlePointWave(). Ideas how to fix that are also welcome! ^^

procedure( singlePointWave(xVal yVal)
    let( (xVect yVect wave)
        xVect = drCreateVec('double list(xVal));
        yVect = drCreateVec('double list(yVal));
        wave = drCreateWaveform(xVect yVect);
    );
);

Hi,

I am looking to perform a net trace in a CDL file.

There is a net at a lower level and would like to know the net it is connected to at the top level.

Please let me know if there is a way to analyze the CDL file to perform this net trace.

Thanks,

Mallikarjun.

I want to create sub tree of sub trees how can i do that?

I want to create another tree for the Sub parameter also.

Is there a skill command for "Assign Layout Instance terminals", this form appears when i click on define device correspondence and Bind the devices.

Also,

Problem Statement : i have a schematic with a couple of transistor symbols and and i alos have a corresponding layout view with respective layout transistors but they all are inside a pCell(created by me) i.e layout transistor called inside a custom Pcell. Now i have multiple symbols in schematic view and a single instance(pCell) in layout view. 
Is there a way how i can bind these schematic symbols with layout symbols inside the pCell(custom)? Even if i have to use cph commands i'm fine with it. need help here.

The idea here is to establish XL connectivity between the schematic symbols and corresponding layout transistors(inside the pCell).

Thanks,

Shankar

Hello,

I was looking to destructively and efficiently modify a list that was passed in as an argument to a procedure, by prepending an item to the list.

I noticed that cons lets you do this efficiently, but the operation is non-destructive. Hence this wouldn't work if you are trying to modify a function's list parameter in place.

Here is an example of trying to add "0" to the front of a list:

Thermal analysis with the Cadence Celsius Thermal Solver integrated within the AWR Microwave Office circuit simulator gives designers an understanding of device operating temperatures related to power dissipation. That temperature information can be introduced into an electrothermal model to predict the impact on RF performance.(read more)

Cadence AWR Design Environment Software Featured in Multiple Training Course Options: Live and Virtual Starting in October(read more)

A recording of a training webinar on Microwave Office is available. Topics show the design environment, with special emphasis placed on electromagnetic (EM) simulation. Normal 0 false false false EN-US JA X-NONE ...(read more)

Hi Cadence, 

I use simvision 20.09-s007 but my computer screen resolution is very high. As a result, the texts are too small. 

In ~/.simvision/Xdefaults I changed that number to 16, from 12. But the signal names in the waveform traces don't reflect the change. 

Simvision*Font: -adobe-helvetica-medium-r-normal--16-*-*-*-*-*-*-*

Other .font changes seem to reflect on the simvision correctly, except the signal names. 

How do I fix that? I dont mind a single variable to change all the texts fonts to 16. 

Thank you!

PS: I found the answer with another post. I change Preference/Waveform/Display/Signal Height. 

We are looking for suitable tools that could be used for RTL design, IP-XACT based  integration (third party IP) and RTL design verification ( SV / UVM based methodology).

Request to share details on the different Cadence tools that is most suitable for these activities.

Hi Cadence & forumers, 

I am running a conformal LEC with a flattened netlist against RTL. 

The run hang for 5 days at the "analyze abort" step which is automatically launched by the compare. 

The netlist is flattened at some levels so hierarchical flow which I tried didn't help much. The flattened/highly optimized netlist is from customer and the ultimate goal. How shall I proceed now? 

On the a side note, a test run with a hierarchical netlist from a simple DC "compile -map_effort medium" command finished after 1 day or so. 

Thank you! 

// Command: vpx compare -verbose -ABORT_Print -NONEQ_Print -TIMEstamp
// Starting multithreaded comparison ...
Comparing 241112 points in parallel.

// Multithreading Overhead: 38% Gates: 8501606/6168138
// Multithreaded processing completed.
================================================================================
Compared points PO DFF DLAT BBOX CUT Total
--------------------------------------------------------------------------------
Equivalent 1025 241638 30 75 21 242789
--------------------------------------------------------------------------------
Abort 0 124 0 0 0 124
================================================================================
Compare results of instance/output/pin equivalences and/or sequential merge
================================================================================
Compared points DFF Total
--------------------------------------------------------------------------------
Equivalent 204 204
================================================================================
// Warning: 512 DFFs/DLATs have 1 disabled clock port: skipped data cone comparison
// Resolving aborts by analyze abort...

I'm currently trying to explore the verilog simulation option in cadence.

One thing that comes to my mind that if there exists a way in cadence workflow to dump selected register/wire's waveform during the simulation. 

Are there any additional tools needed apart from xcelium, is there a tutorial or specific training course for this aspect. I glance through Xcelium Simulator Course Version 22.09, but it seems not having related context. 

I know in Synopsys's workflow, it can be realized using verdi & fsdb in the command line as follows:

if (inst.CTRL_STATE==STATE_START_TO_DUMP)

$fsdbDumpvars(0, inst_1.reg_0);

end

Thanks in advance!

Hello,

I am trying to load some of the signals of the design saved in the signals.svwf to the waveform windown via the tcl file, I am using the following commands but nothing works, Can you please help 

 -submit waveform loadsignals -using "Waveform 2" FB1.svwf but it gives me the below error

-submit waveform new -reuse -name Waveforms

Below is showing my Master.v

********************************************************************************************************************************************************************************************************************

///////ALU
module ALU (
    input [31:0] A,B,
    input[3:0] alu_control,
    output reg [31:0] alu_result,
    output reg zero_flag
);
    always @(*)
    begin
        // Operating based on control input
        case(alu_control)

        4'b0001: alu_result = A+B;
        4'b0010: alu_result = A-B;
        4'b0011: alu_result = A*B;
        4'b0100: alu_result = A|B;
        4'b0101: alu_result = A&B;
        4'b0110: alu_result = A^B;
        4'b0111: alu_result = ~B;
        4'b1000: alu_result = A<<B;
        4'b1001: alu_result = A>>B;
        4'b1010: begin
            if(A<B)
            alu_result = 1;
            else
            alu_result = 0;
        end
        default: alu_result = A+B;

        endcase

        // Setting Zero_flag if ALU_result is zero
        if (alu_result)
            zero_flag = 1'b1;
        else
            zero_flag = 1'b0;   
    end
endmodule


/////CONTROL UNIT
/*
Control unit controls takes opcode, funct7, funct3 of the instruction code to determine
and control regwrite in IFU, alu control in ALU to execute proper instruction
*/
/*
Control unit controls takes opcode, funct7, funct3 of the instruction code to determine
and control regwrite in IFU, alu control in ALU to execute proper instruction
*/
module CONTROL(
    input [4:0] opcode,
    output reg [3:0] alu_control,
    output reg regwrite_control,memread_control,memwrite_control
);
    always @(opcode)
    begin
       case(opcode)
        5'b00001: begin alu_control=4'b0001;  //add
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        5'b00010: begin alu_control=4'b0010;  ///sub
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        5'b00011: begin alu_control=4'b0011;  //mul
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b00100: begin alu_control=4'b0100;  ///OR
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b00101: begin alu_control=4'b0101;  ///AND
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        5'b00110: begin alu_control=4'b0110;  ///XOR
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b00111: begin alu_control=4'b0111;  ///NOT
        regwrite_control=0; memread_control=0; memwrite_control=1;
        end
        5'b01000: begin alu_control=4'b1000;  //SL
        regwrite_control=1; memread_control=1; memwrite_control=0;
        end
        5'b11001: begin alu_control=4'b1001;  //SR
        regwrite_control=1; memread_control=1; memwrite_control=0;
        end
        5'b01010: begin alu_control=4'b1010;  //COMPARE
        regwrite_control=1; memread_control=1; memwrite_control=0;
        end
        //5'b11010: begin ALU_control=4'b0000;  //SW
        //regwrite_control=1; memread_control=0; memwrite_control=0;
        //end
        //5'b01010: begin ALU_control=4'bxxxx;  //LW
        //regwrite_control=0; memread_control=0; memwrite_control=1;
        //end
        default : begin alu_control = 4'b0001;
        regwrite_control=1; memread_control=0; memwrite_control=0;
        end
        endcase  
    end
endmodule



//////DATA MEMORY
module Data_Mem(
input clock, rd_mem_enable, wr_mem_enable,
input [11:0] address,
input [31:0] datawrite_to_mem,
output reg [31:0] dataread_from_mem );

reg [31:0] Data_Memory[8:0];

initial begin
    Data_Memory[0] = 32'hFFFFFFFF;
    Data_Memory[1] = 32'h00000001;
    Data_Memory[2] = 32'h00000005;
    Data_Memory[3] = 32'h00000003;
    Data_Memory[4] = 32'h00000004;
    Data_Memory[5] = 32'h00000000;
    Data_Memory[6] = 32'hFFFFFFFF;
    Data_Memory[7] = 32'h00000000;
    //Data_Memory[8] = 32'h00000008;
    //Data_Memory[9] = 32'h00000009;
    //Data_Memory[10] = 32'h0000000A;
    //Data_Memory[11] = 32'h0000000B;
    //Data_Memory[12] = 32'h0000000C;
    //Data_Memory[13] = 32'h0000000D;
    //Data_Memory[14] = 32'h0000000E;
    //Data_Memory[15] = 32'h0000000F;
    //Data_Memory[16] = 32'h00000010;
    //Data_Memory[17] = 32'h00000011;
    //Data_Memory[18] = 32'h00000012;
    //Data_Memory[19] = 32'h00000013;
    //Data_Memory[20] = 32'h00000014;
    //Data_Memory[21] = 32'h00000015;
    //Data_Memory[22] = 32'h00000016;
    //Data_Memory[23] = 32'h00000017;
    //Data_Memory[24] = 32'h00000018;
    //Data_Memory[25] = 32'h00000019;
    //Data_Memory[26] = 32'h0000001A;
    //Data_Memory[27] = 32'h0000001B;
    //Data_Memory[28] = 32'h0000001C;
    //Data_Memory[29] = 32'h0000001D;
    //Data_Memory[30] = 32'h0000001E;
    Data_Memory[31] = 32'h0000001F;
       
    end
    always@(posedge clock) begin
       if(wr_mem_enable) begin
            Data_Memory[address] <= datawrite_to_mem;
       end
       else if(rd_mem_enable) begin
               dataread_from_mem <= Data_Memory[address];
       end
       else begin
               dataread_from_mem <= 32'h00000000;
       end
    end
endmodule   



/////INST MEM
/*

*/
module INST_MEM(
    input [31:0] PC,
    input reset,
    output [31:0] Instruction_Code
);
    reg [7:0] Memory [43:0]; // Byte addressable memory with 32 locations

    
    assign Instruction_Code = {Memory[PC+3],Memory[PC+2],Memory[PC+1],Memory[PC]};

    
    
    initial begin
            // Setting 32-bit instruction: add t1, s0,s1 => 0x00940333
            Memory[3] = 8'b0000_0000;
            Memory[2] = 8'b0000_0001;
            Memory[1] = 8'b0111_1100;
            Memory[0] = 8'b0000_0001;
            // Setting 32-bit instruction: sub t2, s2, s3 => 0x413903b3
            Memory[7] = 8'b0000_0000;
            Memory[6] = 8'b0000_0110;
            Memory[5] = 8'b1000_1111;
            Memory[4] = 8'b1110_0010;
            // Setting 32-bit instruction: mul t0, s4, s5 => 0x035a02b3
            Memory[11] = 8'b0000_0000;
            Memory[10] = 8'b0000_0101;
            Memory[9] = 8'b0111_1100;
            Memory[8] = 8'b0000_0011;
            // Setting 32-bit instruction: or t3, s6, s7 => 0x017b4e33
            Memory[15] = 8'b1111_1111;
            Memory[14] = 8'b1111_0100;
            Memory[13] = 8'b1010_0000;
            Memory[12] = 8'b1010_0100;
            // Setting 32-bit instruction: and
            Memory[19] = 8'b0000_0000;
            Memory[18] = 8'b0010_1001;
            Memory[17] = 8'b0001_1101;
            Memory[16] = 8'b0010_0101;
            // Setting 32-bit instruction: xor
            Memory[23] = 8'b0000_0000;
            Memory[22] = 8'b0001_1000;
            Memory[21] = 8'b0000_1101;
            Memory[20] = 8'b0110_0110;
            // Setting 32-bit instruction: not
            Memory[27] = 8'b0000_0000;
            Memory[26] = 8'b0010_1001;
            Memory[25] = 8'b0011_1101;
            Memory[24] = 8'b1100_0111;
            // Setting 32-bit instruction: shift left
            Memory[31] = 8'b0000_0000;
            Memory[30] = 8'b0101_0111;
            Memory[29] = 8'b1100_0110;
            Memory[28] = 8'b0000_1000;
            // Setting 32-bit instruction: shift right
            Memory[35] = 8'b0000_0000;
            Memory[34] = 8'b0110_1010;
            Memory[33] = 8'b1101_0010;
            Memory[32] = 8'b0111_1001;
            /// Setting 32-bit instruction: Campare
            Memory[39] = 8'b0000_0000;
            Memory[38] = 8'b0111_1010;
            Memory[37] = 8'b1101_0010;
            Memory[36] = 8'b0110_1010;
            /// Setting 32-bit instruction:
            Memory[43] = 8'b0000_0000;
            Memory[42] = 8'b0111_0111;
            Memory[41] = 8'b1101_0010;
            Memory[40] = 8'b0111_0010;
        end
   

endmodule

//IFU
/*
The instruction fetch unit has clock and reset pins as input and 32-bit instruction code as output.
Internally the block has Instruction Memory, Program Counter(P.C) and an adder to increment counter by 4,
on every positive clock edge.
*/
module IFU(
    input clock,reset,
    output [31:0] Instruction_Code
);
reg [31:0] PC = 32'b0;  // 32-bit program counter is initialized to zero

    
    always @(posedge clock, posedge reset)
    begin
        if(reset == 1)  //If reset is one, clear the program counter
        PC <= 0;
        else
        PC <= PC+4;   // Increment program counter on positive clock edge
    end
    // Initializing the instruction memory block
    INST_MEM instr_mem(.PC(PC),.reset(reset),.Instruction_Code(Instruction_Code));

endmodule


///MUX

module Mux_2X1 (
    input mem_rd_select, // rd_mem_enable
    input wire [31:0] dataread_from_mem, regdata2,

    output reg [31:0] mux_out
);

always @(mem_rd_select or dataread_from_mem or regdata2) begin
    if (mem_rd_select == 1)
        mux_out <= dataread_from_mem ;
    else
        mux_out <= regdata2;
    end
endmodule

//DFlipFlop
module DFlipFlop(D,clock,Q);
input D; // Data input
input clock; // clock input
output reg Q; // output Q
always @(posedge clock)
begin
 Q <= D;
end
endmodule

///DATA path


module DATAPATH(
    input [4:0]Read_reg_add1,
    input [4:0]Read_reg_add2,
    input [4:0]Reg_write_add,
    input [3:0]Alu_control,
    input [11:0]Address,
    input Wr_reg_enable,Wr_mem_enable,Rd_mem_enable,
    input clock,
    input reset,
    output OUTPUT
    );

    // Declaring internal wires that carry data
    wire zero_flag;
    wire [31:0]Dataread_from_mem;
    wire [31:0]read_data1;
    wire [31:0]read_data2;
    wire [31:0]Mux_out;
    wire [31:0]Alu_result;
    //wire [31:0]datawrite_to_reg;

    // Instantiating the register file
    REG_FILE reg_file_module(.reg_read_add1(Read_reg_add1),.reg_read_add2(Read_reg_add2),.reg_write_add(Reg_write_add),.datawrite_to_reg(Alu_result),.read_data1(read_data1),.read_data2(read_data2),.wr_reg_enable(Wr_reg_enable),.clock(clock),.reset(reset));

    // Instanting ALU
    ALU alu_module(.A(read_data1), .B(Mux_out), .alu_control(Alu_control), .alu_result(Alu_result), .zero_flag(zero_flag));
    
    //Mux
    Mux_2X1 mux(.mem_rd_select(Rd_mem_enable),.dataread_from_mem(Dataread_from_mem),.regdata2(read_data2),.mux_out(Mux_out));

    //Data Memory
    Data_Mem DM(.clock(clock),.rd_mem_enable(Rd_mem_enable),.wr_mem_enable(Wr_mem_enable),.address(Address),.datawrite_to_mem(Alu_result),.dataread_from_mem(Dataread_from_mem));
    
    // Dflipflop
    DFlipFlop DF (.D(zero_flag), .Q(OUTPUT),.clock(clock));
endmodule


/*
A register file can read two registers and write in to one register.
The RISC V register file contains total of 32 registers each of size 32-bit.
Hence 5-bits are used to specify the register numbers that are to be read or written.
*/

/*
Register Read: Register file always outputs the contents of the register corresponding to read register numbers specified.
Reading a register is not dependent on any other signals.

Register Write: Register writes are controlled by a control signal RegWrite.  
Additionally the register file has a clock signal.
The write should happen if RegWrite signal is made 1 and if there is positive edge of clock.
*/
module REG_FILE(
    input [4:0] reg_read_add1,
    input [4:0] reg_read_add2,
    input [4:0] reg_write_add,
    input [31:0] datawrite_to_reg,
    output [31:0] read_data1,
    output [31:0] read_data2,
    input wr_reg_enable,
    input clock,
    input reset
);

    reg [31:0] reg_memory [31:0]; // 32 memory locations each 32 bits wide
    
    initial begin
        reg_memory[0] = 32'h00000000;
        reg_memory[1] = 32'hFFFFFFFF;
        reg_memory[2] = 32'h00000002;
        reg_memory[3] = 32'hFFFFFFFF;
        reg_memory[4] = 32'h00000004;
        reg_memory[5] = 32'h01010101;
        reg_memory[6] = 32'h00000006;
        reg_memory[7] = 32'h00000000;
        reg_memory[8] = 32'h10101010;
        reg_memory[9] = 32'h00000009;
        reg_memory[10] = 32'h0000000A;
        reg_memory[11] = 32'h0000000B;
        reg_memory[12] = 32'h0000000C;
        reg_memory[13] = 32'h0000000D;
        reg_memory[14] = 32'h0000000E;
        reg_memory[15] = 32'h0000000F;
        reg_memory[16] = 32'h00000010;
        reg_memory[17] = 32'h00000011;
        reg_memory[18] = 32'h00000012;
        reg_memory[19] = 32'h00000013;
        reg_memory[20] = 32'h00000014;
        reg_memory[21] = 32'h00000015;
        //reg_memory[22] = 32'h00000016;
        //reg_memory[23] = 32'h00000017;
        //reg_memory[24] = 32'h00000018;
        //reg_memory[25] = 32'h00000019;
        //reg_memory[26] = 32'h0000001A;
        //reg_memory[27] = 32'h0000001B;
        //reg_memory[28] = 32'h0000001C;
        //reg_memory[29] = 32'h0000001D;
        //reg_memory[30] = 32'h0000001E;
        reg_memory[31] = 32'hFFFFFFFF;
    end

    // The register file will always output the vaules corresponding to read register numbers
    // It is independent of any other signal
    assign read_data1 = reg_memory[reg_read_add1];
    assign read_data2 = reg_memory[reg_read_add2];

    // If clock edge is positive and regwrite is 1, we write data to specified register
    always @(posedge clock)
    begin
        if (wr_reg_enable) begin
            reg_memory[reg_write_add] = datawrite_to_reg;
        end     
    else
        reg_memory[reg_write_add] = 32'h00000000;
    end
endmodule


/////PROCESSOR


module PROCESSOR(
    input clock,
    input reset,
    output Output
);

    wire [31:0] instruction_Code;
    wire [3:0] ALu_control;
    wire WR_reg_enable;
    wire WR_mem_enable;
    wire RD_mem_enable;


    IFU IFU_module(.clock(clock), .reset(reset), .Instruction_Code(instruction_Code));
    
    CONTROL control_module(.opcode(instruction_Code[4:0]),.alu_control(ALu_control),.regwrite_control(WR_reg_enable),.memread_control(RD_mem_enable),.memwrite_control(WR_mem_enable));
    
    DATAPATH datapath_module(.Wr_mem_enable(WR_mem_enable),.Rd_mem_enable(RD_mem_enable),.Read_reg_add1(instruction_Code[9:5]),.Read_reg_add2(instruction_Code[14:10]),.Reg_write_add(instruction_Code[19:15]),.Address(instruction_Code[31:20]),.Alu_control(ALu_control),.Wr_reg_enable(WR_reg_enable), .clock(clock), .reset(reset), .OUTPUT(Output));

endmodule

**********************************************************************************************************************************************************

Below is my Synthesis.tcl file for genus synthesis

********************

set_attribute lib_search_path "/home/sameer23185/Desktop/VDF_PROJECT/lib"
set_attribute hdl_search_path "/home/sameer23185/Desktop/VDF_PROJECT"
set_attribute library "/home/sameer23185/Desktop/VDF_PROJECT/lib/90/fast.lib"
read_hdl Master.v
elaborate
read_sdc Min_area.sdc
set_attribute hdl_preserve_unused_register true
set_attribute delete_unloaded_seqs false
set_attribute optimize_constant_0_flops false
set_attribute optimize_constant_1_flops false
set_attribute optimize_constant_latches false
set_attribute optimize_constant_feedback_seqs false
#set_attribute prune_unsued_logic false
synthesize -to_mapped -effort medium
write_hdl > report/HDL_min_Netlist.v
write_sdc > report/constraints.sdc
write_script > report/synthesis.g
report_timing > report/synthesis_timing_report.rep
report_power > report/synthesis_power_report.rep
report_gates > report/synthesis_cell_report.rep
report_area > report/synthesis_area_report.rep
gui_show

**********************************************

WHEN I COMPARING MY GOLDEN.V WITH HDL_min_Netlist.v  during   conformal , I got  these  non-equivalent   point   for   every reg memory and for every data memory. I don't know what to do with these non-equivalent point. I've been stuck here for the past four days. Please help me in this and how can I remove this non- equivalent point , since I am new to this I really don't know what to do.

hi

How can I tell the LEC tool to ignore a combination of Primary input bus in both Golden and revised.

For example in both Golden and revised there is 

input [3:0] data_in

I want LEC not to check the case that data_in[3:0] == 4'b1000

I am trying to understand the Linting process. I know that mainly JasperGold is the tool for this purpose. Though I think JasperGold is more suited for later stages of the design. As a RTL Design Engineer, I want to make sure that if another tool has the capability of doing Linting earlier in the flow. for example, does Xcelium, Genus or Confomal support linting. I have seen some contradicting information online regarding this topic, though I can't find anything related to Linting on any of these tools.

Thanks

Hi. I'm a very new learner on Cadence. I want to synthesis my logic design for the maximum, minimum and an average results of delay, power dissipation and area under varying multiple inputs of different data. The different data will be exported from other software results. I'm lost on the steps/processes I should do.

Could anyone suggest me on which software and/or function or scripts I should use to achieve these results?

Optimize Regression Suite, Accelerate Coverage Closure, and Increase hit count of rare bins using Xcelium Machine Learning. It is easy to use and has no learning curve for existing Xcelium customers. Xcelium Machine Learning Technology helps you discover hidden bugs when used early in your design verification cycle.(read more)

With the DRAM fabrication advancing from 1x to 1y to 1z and further to 1a, 1b and 1c nodes along with the DRAM device speeds going up to 8533 for Lpddr5/8800 for DDR5, Data integrity is becoming a really important issue that the OEMs and other users have to consider as part of the system that relies on the correctness of data being stored in the DRAMs for system to work as designed.

It’s a complicated problem that requires multiple ways to deal with it.

Traditionally one of the main approaches to deal with data errors is to rely on the ECC. ECC requires additional memory storage in which the ECC codes will calculated and stored at the time of memory write to DRAM. These codes will be read back along with the memory data during to the reads and checked against the data to make sure that there are no errors. Typical ECC schemes use Hamming code that provide for single bit error correction and double bit error detection per burst. Also, while several of previous generation of DRAM required Host to keep aside system memory for ECC storage latest DRAMs like Lpddr5 and DDR5 support on die ECC as part of the normal DRAM function that can be enabled using mode registers. DDR5 further requires Host to run through an ECC Error Check and Scrub (ECS) cycle on an average every tECSint time (Average Periodic ECS Interval) to prevent data errors.

Not meeting the DRAM Refresh requirement is a major reason that can lead to loss of data. This could be challenging as the PVT variation can cause the refresh requirement to change over time. Putting the DRAM in Self Refresh mode can help off-loading Refresh tracking responsibilities to DRAM but may prevent Host to do other scheduling optimizations and should be carefully considered.

Some of the other things that can affect the DRAM data are

1. Row hammer where same or adjacent rows are activated again and again leading to loss or changing of data contents in the rows that has not being addressed. Latest DRAMs like Lpddr5/Ddr5 support Refresh Management (including DRFM and ARFM) that allows the Host to compensate for these problems by issuing dedicated RFM commands helping DRAMs deals with potential Data loss issues arising out of Row hammer attacks.
2. Device temperature is another important factor that the Host needs to be aware of and if the application requires DRAM to operate at elevated temperature. The user needs to check with DRAM Vendor on the temperature range that DRAM can still operate. Data integrity at thresholds greater than certain temperature is not assured regardless of refresh rate unless DRAM is manufactured to withstand that.
3. Loss of power to DRAM will cause DRAM to lose all its contents. If this is a real concern for the system designer, they should consider using NVDIMM-N devices which has an onchip controller and a power source which is just enough to allow the DRAM contents to be copied into a backup non-volatile memory before power is lost. When the power is stored back, the stored memory contents in the non-volatile memory will be written back to the DRAM and system can continue to operate as it was before the power loss event occurred.

For transmissions and manufacturing errors DRAMs support additional features like CRC, DFE, Pre-Emphasis and PPR which will be covered in the next blog.

Cadence MMAV VIPs for DDR5/DDR5 DIMM and LPDDR5 are compressive VIP solutions and supports all of the above-listed Data integrity features including support for ECC error injection and SBE correction/DBE detection to assist with the verification challenges dealing with data integrity issues.

More information on Cadence DDR5/LPDDR5 VIP is available at Cadence VIP Memory Models Website.

Shyam