Ensuring that the RTL designs correctly implement the C++ algorithmic intent in every circumstance is difficult to achieve with conventional verification. Learn more how Jasper C2RTL App helps to perform equivalence checking with 100x performance improvement(read more)

Xcelium Simulator has been in the industry for years and is the leading high-performance simulation platform. As designs are getting more and more complex and verification is taking longer than ever, the need of the hour is plug-and-play apps that ar...(read more)

Speed increase requirements keep on flowing by in all the domains surrounding us. The same applies to memory storage too. Earlier mobile devices used eMMC based flash storage, which was a significantly slower technology. With increased SoC processing speed, pairing it with slow eMMC storage was becoming a bottleneck. That is when modern storage technology Universal Flash Storage (UFS) started to gain popularity. 

UFS is a simple and high-performance mass storage device with a serial interface. It is primarily used in mobile systems between host processing and mass storage memory devices. Another important reason for the usage of UFS in mobile systems like smartphones and tablets is minimum power consumption. 

To achieve the highest performance and most power-efficient data transport, JEDEC UFS works in collaboration with industry-leading specifications from the MIPI® Alliance to form its Interconnect Layer. MIPI UniPro is used as a transport layer, and MIPI MPHY is used as a physical layer with the serial DpDn interface. 

UFS 4.0 specification is the latest specification from JEDEC, which leverages UniPro 2.0 and MPHY 5.0 specification standards to achieve the following major improvements:

• Enables up to 4200 Mbps read/write traffic with MPHY 5.0, allowing 23.29 Gbps data rate. 
• High Speed Link Startup, along with Out of Order Data Transfer and BARRIER Command, were introduced to improve system latencies. 
• Data security is enhanced with Advanced RPMB. Advance RPMB also uses the EHS field of the header, which reduces the number of commands required compared to normal RPMB, increasing the bandwidth. 
• Enhanced Device Error History was introduced to ease system integration. 
• File Based Optimization (FBO) was introduced for performance enhancement. 

Along with many major enhancements, UFS 4.0 also maintains backward compatibility with UFS 3.0 and UFS 3.1. 

JEDEC has just announced the UFS 4.0 specification release, quoting Cadence support as a constant contributor in the JEDEC UFS Task Group, actively participating in these specifications development.  

With the availability of the Cadence Verification IP for JEDEC UFS 4.0, MIPI MPHY 5.0 and MIPI UniPro 2.0, early adopters can start working with the provisional specification immediately, ensuring compliance with the standard and achieving the fastest path to IP and SoC verification closure.  

More information on Cadence VIP is available at the Cadence VIP Website. 

Yeshavanth B N 

New IC packaging workflows in Cadence Allegro X layout tools allow you to follow a guided path from starting a design through final manufacturing. The path is there to ensure that you don’t miss steps and perform actions in the optimal order. W...(read more)

At what stage in the design cycle do you start to think about the PCB material costs? What about the costs to assemble the PCB? Once a design becomes successful, should you then redesign it to achieve a scalable product? Placing components and routi...(read more)

OrCAD X is the next-generation integrated PCB design platform. It brings to you a powerful cloud-enabled design solution that includes design and library data management integrated with the proven PCB design and analysis product portfolio of Cad...(read more)

Community engagement is a dynamic concept that does not adhere to a singular, universal approach. Its various forms, methods, and objectives can vary significantly depending on the specific context, goals, and desired outcomes. Whether you seek assis...(read more)

Does anyone know whether it is possible to have multiple contact points for a bond wire on a large die pad? Note: This is different from adding multiple wires which I will also be doing. I need to add multiple bond connections to the same large die pad for redundancy connections to each pad for each wire. I have a large die pad which I need to have 5 wires with each wire having 3 bond connections to the same die pad.

Have you ever encountered ERROR(SPMHNI-67) while importing logic? If yes, you might already know that you had to export libraries of the design and make sure that paths (devpath, padpath, and psmpath) include the location of exported files.  

Starting in SPB23.1, if you go to File > Import > Logic/Netlist and click on the Other tab, you will see an option, Reuse device files for existing components. 

After selecting this option, ERROR(SPMHNI-67) will no longer be there in the log file, because the tool will automatically extract device files and seamlessly use them for newly imported data. In other words, SPB_23.1 lets you reuse the device / component definitions already in the design without first having to dump libraries manually. An excellent improvement, don’t you think?  

Hello, SKILL experts. 

I'm studying SKILL language to build some useful function in APD+.

Now, I want to execute 'Import Sub-drawing' function in new form.

But I cannot find how to do execute APD+ embedded function in a field of new form. 

Has anyone experienced this or idea to solve this problem? 

Display Stream Compression (DSC) is a lossless or near-lossless image compression standard developed by the Video Electronics Standards Association (VESA) for reducing the bandwidth required to transmit high-resolution video and images. DSC compresses video streams in real-time, allowing for higher resolutions, refresh rates, and color depths while minimizing the data load on transmission interfaces such as DisplayPort, HDMI, and embedded display interfaces.

Why Is DSC Needed?

In the ever-evolving landscape of display technology, the pursuit of higher resolutions and better visual quality is relentless. As display capabilities advance, so do the challenges of managing the immense amounts of data required to drive these high-performance screens. This is where DSC steps in. DSC is designed to address the challenges of transmitting ultra-high-definition content without sacrificing quality or performance. As displays grow in resolution and capability, the amount of data they need to transmit increases exponentially. DSC addresses these issues by compressing video streams in real-time, significantly reducing the bandwidth needed while preserving image quality.
 

DSC Use in End-to-end System

DSC Key Features

• Encoding tools:
  • Modified Median-Adaptive Prediction (MMAP)
  • Block Prediction (BP)
  • Midpoint Prediction (MPP)
  • Indexed color history (ICH)
  • Entropy coding using delta size unit-variable length coding (DSU-VLC)

• The DSC bitstream and decoding process are designed to facilitate the decoding of 3 pixels/clock in practical hardware decoder implementations. Hardware encoder implementations are possible at 1 pixel/clock.
• DSC uses an intra-frame, line-based coding algorithm, which results in very low latency for encoding and decoding.

DSC encoding algorithm
 

• Compression can be done to a fractional bpp. The compressed bits per pixel ranges from 6 to 63.9375.
• For validation/compliance certification of DSC compression and decompression engines, cyclic redundancy checks (CRCs) are used to verify the correctness of the bitstream and the reconstructed image.
• DSC supports more color bit depths, including 8, 10, 12, 14, and 16 bpc.
• DSC supports RGB and YCbCr input format, supporting 4:4:4, 4:2:2, and 4:2:0 sampling.
• Maximum decompressor-supported bits/pixel values are as listed in the Maximum Allowed Bit Rate column in the table below

• DP DSC Source device shall program the bit rate within the range of Minimum Allowed Bit Rate column in the table:

Summary

Display Stream Compression (DSC) is a technology used in DisplayPort to enable higher resolutions and refresh rates while maintaining high image quality. It works by compressing the video data transmitted from the source to the display, effectively reducing the bandwidth required. DSC uses a visually lossless algorithm, meaning that the compression is designed to be imperceptible to the human eye, preserving the fidelity of the image. This technology allows for smoother, more detailed visuals at higher resolutions, such as 4K or 8K, without requiring a significant increase in data bandwidth.

More Information

• Cadence has a very mature Verification IP solution. Verification over many different configurations can be used with DisplayPort 2.1 and DisplayPort 1.4 designs, so you can choose the best version for your specific needs.
• The DisplayPort VIP provides a full-stack solution for Sink and Source devices with a comprehensive coverage model, protocol checkers, and an extensive test suite.
• More details are available on the DisplayPort Verification IP product page, Simulation VIP pages.
• If you have any queries, feel free to contact us at talk_to_vip_expert@cadence.com

The Cadence Palladium Emulation Platform is a hardware system that implements the design, accelerating its execution and verification. Itoffers the highest performance and fastest bring-up times for pre-silicon validation of billion-gate designs, using a custom processor built by Cadence.

This Palladium Introduction course is based on the Palladium 23.03 ISR4 version and covers the following modules:

• Introduction
• Palladium flow
• Running a design on the Palladium system

This course starts with an “Introduction” module that explains Palladium and other verification platforms to show its place in the big picture. It also compares Palladium with Protium and simulation and discusses its usage and limitations.

The “Palladium Flow” module includes two stages at a high level, which are Compile and Run. Then, it covers these stages in detail. First, it covers the ICE compile flow and IXCOM compile flow steps in detail. Then it explains Run, which is common for both ICE and IXCOM modes.

The third module, “Running Design on the Palladium System,” covers all the items required for running your design on the Palladium system, including:

• Software stack requirements
• Basic concepts required to understand the flow
• Compute machine requirements

In addition, this course contains labs for both the ICE and IXCOM flows with detailed steps to exercise the features provided by the Palladium system. The lab explains a practical example of multiple counters and exercising their signals for force, monitor, and deposit features, along with frequency calculation using a real-time clock. The course is available on the Cadence support page:

There is also a Digital Badge available. You will find the Badge exam opportunity when you enroll in the Online training or after you have taken the training as "live" training.

For questions and inquiries, or issues with registration, reach out to us at Cadence Training. Want to stay up to date on webinars and courses? Subscribe to Cadence Training emails. To view our complete training offerings, visit the Cadence Training website.

Related Training Bytes

• Palladium: What Are Verification Platforms
• Palladium: What Is Processor Based Emulation
• Palladium: Comparing Emulation (Z2) and Prototyping (X2)
• Palladium: What Are ICE and IXCOM Compile Flow
• Palladium: How to Process a Design to Run on Palladium
• Palladium: XCOM Compile Flow (TB+RTL to Palladium Database)
• Palladium: ICE Compile Flow (RTL to Palladium Database)
• Palladium: Legacy ICE Compile Flow
• Palladium: Cadence Software Releases for Palladium and Protium Flow
• Palladium: Setting of PATHs for Using Palladium
• Palladium: Z2 Hardware Structure (Blade and Boards)
• Palladium: What Is Sourceless and Loadless nets
• Palladium: Design Clocks
• Palladium: Step Count and Step Clock
• Palladium: Steps for Running the Design on Palladium Z2

Related Courses

• Verilog Language and Application Training
• SystemVerilog for Design and Verification
• Xcelium Simulator

Related Blogs

• Training Insights – A New Free Online Course on the Protium System for Beginner and Advanced Users
• It’s the Digital Era; Why Not Showcase Your Brand Through a Digital Badge!
• Training Insights - Free Online Courses on Cadence Learning and Support Portal

The course "Jasper Formal Fundamentals v24.03" introduces formal analysis to those who want to use formal analysis for design or verification. 

To optimally benefit from this course, you must already have sufficient knowledge of the System Verilog assertions to be capable of writing properties for formal verification. Hence, this training provides a module on formal analysis to help cover this essential background. 

In this course, you will learn how to code efficient SVA Properties for formal analysis, understand formal complexity and how to overcome it, and learn the basics of formal coverage.

After completing this course, you will be able to:

• Define reusable, functionally correct SVA properties that are efficient for formal tools. These shall use abstract auxiliary code to simplify descriptions, make code maintenance easier, reduce debug time, and reduce tool-proof runtime.
• Set up, run, and analyze results from formal analysis.
• Identify designs upon which formal is likely to be successful while understanding formal complexity issues and how to identify and overcome them.
• Use a systematic property development process to approach a completely new verification problem.
• Understand the basics of formal coverage.

 The most recently updated release includes new modules on:

• "Basic complexity handling" which discusses the complexity in formal and how to identify and handle them.
• "Complexity reduction methods” which discusses the complexity reduction methods and which is suitable for which type of complexity problem.
• “Coverage in formal” which discusses the basics of coverage in formal verification and how coverage can be used in formal.   

Take this course to learn the basics of formal verification. 

What's Next? 

You can check out the complete training: Jasper Formal Fundamentals. There is a free online version of the training available 24/7 for all customers with a Cadence Learning and Support Portal account. If you are interested in an instructor-led version of the training, please contact Cadence Training. And don't forget to obtain your digital badge after completing the training!

You can also check Jasper University page for more materials on formal analysis and Jasper apps. 

Related Trainings 

Jasper Formal Expert Training Course | Cadence

Verilog Language and Application Training Course | Cadence

SystemVerilog for Design and Verification Training Course | Cadence

SystemVerilog Assertions Training Course | Cadence

Related Training Bytes 

Jasper Formal Property Verification (FPV) App: Basic Usage Demo (Video)

Jasper Formal Methodology playlist

Related Training Blogs

It’s the Digital Era; Why Not Showcase Your Brand Through a Digital Badge!

Training Insights: Introducing the C++ Course for All Your C++ Learning Needs!

Training Insights: Reaching Your Verification Closure Using Verisium Manager

Training Insights - Free Online Courses on Cadence Learning and Support Portal

Cadence PCIe/CXL VIP support for Partial Header Encryption in Integrity and Data Encryption.(read more)

In SoC development, the verification cycle is a crucial phase that ensures products meet their specifications and function correctly. However, the complexity of modern SoC projects, with their constant data flow, multiple validation teams working in parallel, and tight schedules, presents significant challenges. This article explores these challenges and introduces Verisium Manager as a solution that embodies the 'One Tool Fits All' concept. This means that Verisium Manager is designed to handle all aspects of the verification process for SoC development, from planning to coverage analysis to regression testing, thereby addressing the complex needs of SoC verification.

The Hurdles in Traditional Validation Cycles

 A typical validation process involves planning, coverage analysis, and regression testing. This complexity is compounded by using separate tools for each activity, leading to multiple control environments, APIs, and databases, not to mention the array of tool owners. Such fragmentation results in constant data transfer and translation between systems, from the planning tool to the coverage analysis tool and then to the regression testing tool. This continuous movement of data causes delays, system instability, poor user experiences, and, ultimately, a dip in the quality of the validation process.

The use of multiple platforms leads to inefficiency and reduced productivity. What's needed is a unified system that can streamline the workflow, simplify the verification process, and enhance its effectiveness.

Envisioning the Ideal Solution: Verisium Manager

 The cornerstone of an efficient validation cycle is integration and simplicity. The ideal solution is a singular platform that consolidates planning, coverage analysis, and regression management into one smooth, unified process. Verisium Manager emerges as this much-needed solution, encompassing all the functionalities necessary to streamline the validation process. Its comprehensive nature instills confidence in its ability to handle all aspects of the verification cycle. It can be fully customized to address and enforce any validation methodology and can facilitate smooth integration into any customer environment.

Features that stand out in Verisium Manager include: 

• Unified Workflow: It acts as a single cockpit from which all activities are orchestrated, ensuring the validation teams' work is uninterrupted and seamlessly integrated.
• Customization and Integration: Verisium Manager supports customizing test-plan structures and mapping results per project, ensuring a perfect fit for various project requirements. Its ability to smoothly integrate into the project's environment and compute platforms is unparalleled.
• Support for Continuous Updates and Migration: The tool accommodates constant updates to project data and supports the migration of legacy data, ensuring that no historical data is lost in the transition to a new system.

Addressing Project-Specific Needs

 Verisium Manager recognizes diversity in different projects and offers project-specific solutions, including:

 Enforcing Project Test-Plan Structures and Attributes: It supports and enforces each project's unique test-plan structure and mapping guidelines.

• Unified Data Views and Measurements: Verisium Manager promotes a unified view of data across all teams and enforces unified measurements, ensuring consistency and clarity in the validation process.
• Enabling Project-Specific Actions and Integrations: The tool is designed to support project-specific actions directly from its graphical user interface and allows for smooth integration with in-house databases, dashboards, and the project execution stack.

Verisium Manager is the epitome of efficiency in software/hardware validation. Its differentiating features, such as support for customization, unified data view, and comprehensive coverage and regression requirements, make it an indispensable tool for any validation team looking to elevate their workflow.

Cadence Protium prototyping platforms rapidly bring up an SoC or system prototype and provide a pre-silicon platform for early software development, SoC verification, system validation, and hardware regressions. In this Training W ebinar, we will explore debugging using Save/Restart on Protium X2 . This feature saves execution time and lets you focus on actual debugging. The system state can be saved before the bug appears and restartS directly from there without spending time in initial execution. We’ll cover key concepts and applications, explore Save/Restart performance metrics, and provide examples to help you understand the concepts. Agenda: The key concepts of debugging using save/restart Capabilities, limitations, and performance metrics Some examples to enable and use save/restart on the Protium X2 system Date and Time Thursday, November 7, 2024 07:00 PST San Jose / 10:00 EST New York / 15:00 GMT London / 16:00 CET Munich / 17:00 IST Jerusalem / 20:30 IST Bangalore / 23:00 CST Beijing REGISTER To register for this webinar, sign in with your Cadence Support account (email ID and password) to log in to the Learning and Support System*. Then select Enrol to register for the session. Once registered, you’ll receive a confirmation email containing all login details. A quick reminder: If you haven’t received a registration confirmation within 1 hour of registering, please check your spam folder and ensure your pop-up blockers are off and cookies are enabled. For issues with registration or other inquiries, reach out to eur_training_webinars@cadence.com . Want to See More Webinars? You can find recordings of all past webinars here Like This Topic? Take this opportunity and register for the free online course related to this webinar topic: Protium Introduction Training The course includes slides with audio and downloadable lab exercises designed to emphasize the topics covered in the lecture. There is also a Digital Badge available for the training. Want to share this and other great Cadence learning opportunities with someone else? Tell them to subscribe . Hungry for Training? Choose the Cadence Training Menu that’s right for you. To view our complete training offerings, visit the Cadence Training website . Related Courses Protium Introduction Training Course | Cadence Palladium Introduction Training Course | Cadence Related Blogs Training Insights – A New Free Online Course on the Protium System for Beginner and Advanced Users Training Insights – Palladium Emulation Course for Beginner and Advanced Users Related Training Bytes Protium Flow Steps for Running Design on Protium System ICE and IXCOM mode comparison ICE compile flow IXCOM compile flow PATH settings for using Protium System Please see the course learning maps for a visual representation of courses and course relationships. Regional course catalogs may be viewed here

DDR5 DIMM Architectures The DDR5 generation of Double Data Rate DRAM memories has experienced rapid adoption in recent years. In particular, the JEDEC-defined DDR5 Dual Inline Memory Module (DIMM) cards have become a mainstay for systems looking for high-density, high-bandwidth, off-chip random access memory[1]. Within a short time, the DIMM architecture evolved from an interconnected hierarchy of only SDRAM memory devices (UDIMM[2]) to complex subsystems of interconnected components (RDIMM/LRDIMM/MRDIMM[3]). DIMM Designs and Popular Verification Use Cases The growing complexity of the DIMMs presented a challenge for pre-silicon verification engineers who could no longer simply validate against single DDR5 SDRAM memory models. They needed to consider how their designs would perform against DIMMs connected to each channel and operating at gigahertz clock speeds. To address this verification gap, Cadence developed DDR5 DIMM Memory Models that encapsulated all of the architectural complexities presented by real-world DIMMs based on a robust, easy-to-use, easy-to-debug, and easy-to-reconfigure methodology. This memory-subsystem-in-a-single-instance model has seen explosive adoption among the traditional IP Developer and SOC Integrator customers of Cadence Memory Models. The Cadence DIMM models act as a single unit with all of the relevant DIMM components instantiated and interconnected within, and with all AC/Timing parameters among the various components fully matched out-of-the-box, based on JEDEC specifications as well as datasheets of actual devices in the market. The typical use-case for the DIMM models has been where the DUT is a DDR5 Memory Controller + PHY IP stack, and the validation plan mandated compliance with the JEDEC standards and Memory Device vendor datasheets. Unique Use Case for the DIMM Discrete Component Models Although the Cadence DIMM models have enjoyed tremendous proliferation because of their cohesive implementation and unified user API, the actual DIMM Models are built on top of powerful, flexible discrete component models, each of which was designed to stand on its own as a complete SystemVerilog UVM-based VIP. All of these discrete component models exist in the Cadence VIP Catalog as standalone VIPs, complete with their own protocol compliance checking capabilities and their own configuration mappings comprehensively modeling individual AC/Timing parameters. Because of this deliberate design decision, the Cadence DIMM Discrete Component Models can support a unique use-case scenario. Some users seek to develop IC Designs for the various DIMM components. Such users need verification environments that can model the individual components of a DIMM and allow them the option to replace one or another component with their Component Design IP. They can then validate that their component design is fully compatible with the rest of the components on the DIMM and meets the integrity of the overall DIMM compliance with JEDEC standards or Memory Vendor datasheets. The Cadence Memory VIP portfolio today includes various examples that demonstrate how customers can create DIMM “wrappers” by selecting from among the available DIMM discrete component models and “stitching” them together to build their own custom testbench around their specific Component Design IP. A Solution for Unique Component Scenarios The Cadence DDR5 DIMM Memory Models and DIMM Discrete Component Models can provide users with a flexible approach to validating their specific component designs with a fully populated pre-silicon environment. Augmented Verification Capabilities When the DIMM “wrapper” model is augmented with the Cadence DFI VIP[4] that can simulate an MC+PHY stack and offers a SystemVerilog UVM test API to the verification engineer, the overall testbench transforms into a formidable pre-silicon validation vehicle. The DFI VIP is designed as a combination of an independent DFI MC VIP and a DFI PHY VIP connected to each other via the DFI Standard Interface and capable of operating seamlessly as a single unit. It presents a UVM Sequence API to the user into the DFI MC VIP with the Memory Interface of the PHY VIP connected to the DIMM “wrapper” model. With this testbench in hand, the user can then fully take advantage of the UVM Sequence Library that comes with the DFI VIP to enable deep validation of their Component Design inside the DIMM “wrapper” model. Verification Capabilities Further Enhanced A possible further enhancement comes with the potential addition of an instance of the Cadence DIMM Memory Model in a Passive Monitor mode at the DRAM Memory Interface. The DIMM Passive Monitor consumes the same configuration describing the DIMM “wrapper” in the testbench, and thus can act as a reference model for the DIMM wrapper. If the DIMM Passive Monitor responds successfully to accesses from the DFI VIP, but the DIMM wrapper does not, then it exposes potential bugs in the DUT Components or in the settings of their AC/Timing parameters inside the DIMM wrapper. Debuggability, Interface Visibility, and Protocol Compliance One of the key benefits of the DIMM Discrete Component Models that become manifest, whether in terms of the unique use-case scenario described here, or when working with the wholly unified DDR5 DIMM Memory Models, is the increased debuggability of the protocol functionality. The intentional separation of the discrete components of a DIMM allows the user to have full visibility of the memory traffic at every datapath landmark within a DIMM structure. For example, in modeling an LRDIMM or MRDIMM, the interface between the RCD component and the SDRAM components, the interface between the RCD component and the DB components, and the interface between the SDRAM components and the DB components—all are visible and accessible to the user. The user has full access to dump the values and states of the wire interconnects at these interfaces to the waveform viewer and thus can observe and correlate the activity against any protocol violations flagged in the trace logs by any one or more of the DIMM Discrete Component Models. Access to these interfaces is freely available when using the DIMM Discrete Component Models. On the unified DDR5 DIMM Memory Models, a feature called Debug Ports enables the same level of visibility into the individual interconnects amidst the SDRAM components, RCD components, and DB components. When combined with the Waveform Debugger[5] capability that comes built-in with the VIPs and Memory Models offered by Cadence and used with the Cadence Verisium Debug[6] tool, the enhanced debuggability becomes a powerful platform. With these debug accesses enabled, the user can pull out transaction streams, chip state and bank state streams, mode register streams, and error message streams all right next to their RTL signals in the same Verisium Debug waveform viewer window to debug failures all in one place. The Verisium Debug tool also parses all of the log files to probe and extract messages into a fully integrated Smart Log in a tabbed window fully hyperlinked to the waveform viewer, all at your fingertips. A Solution for Every Scenario Cadence's DDR5 DIMM Memory Models and DIMM Discrete Component Models , partnered with the Cadence DFI VIP, can provide users with a robust and flexible approach to validating their designs thoroughly and effectively in pre-silicon verification environments ahead of tapeout commitments. The solution offers unparalleled latitude in debuggability when the Debug Ports and Waveform Debugger functions of the Memory Models are switched on and boosted with the use of the Cadence Verisium Debug tool. [1] Shyam Sharma, DDR5 DIMM Design and Verification Considerations , 13 Jan 2023. [2] Shyam Sharma, DDR5 UDIMM Evolution to Clock Buffered DIMMs (CUDIMM) , 23 Sep 2024. [3] Kos Gitchev, DDR5 12.8Gbps MRDIMM IP: Powering the Future of AI, HPC, and Data Centers , 26 Aug 2024. [4] Chetan Shingala and Salehabibi Shaikh, How to Verify JEDEC DRAM Memory Controller, PHY, or Memory Device? , 29 Mar 2022. [5] Rahul Jha, Cadence Memory Models - The Gold Standard , 15 Apr 2024. [6] Manisha Pradhan, Accelerate Design Debugging Using Verisium Debug , 11 Jul 2023.

The demand for higher compute performance, energy efficiency, and faster time-to-market drove the conversations at this year's Open Compute Project (OCP) Global Summit in San Jose, California. It was the scene of showcasing groundbreaking innovations, expert-led sessions, and networking opportunities to drive the future of data center technology. For those who didn't get to attend or stop by our booth, here's a recap of Cadence's comprehensive solutions that enable next-generation compute technology, AI data center design, analysis, and optimization. Optimized Data Center Design and Operations As the data center community increasingly faces demands for enhanced efficiency, thermal management, sustainability, and performance optimization, data center operators, IT managers, and executives are looking for solutions to these challenges. At the Cadence booth, attendees explored the Cadence Reality Digital Twin Platform and Celsius EC Solver. These technologies are pivotal in achieving high-performance standards for AI data centers, providing advanced digital twin modeling capabilities that redefine next-generation data center design and operation. The Celsius EC Solver demonstration showed how it solves challenging thermal and electronics cooling management problems with precision and speed. CadenceCONNECT: Take the Heat Out of Your AI Data Center Cadence hosted a networking reception on October 16 titled "Take the Heat Out of Your AI Data Center." In today's AI era, managing the heat generated by high-density computing environments is more critical than ever. This reception offered insights into current and emerging data center technologies, digital twin cooling strategies that deliver energy-saving operations, and a chance to engage with industry leaders, Cadence experts, and peers to explore the latest cooling, AI, and GPU acceleration advancements. Here's a recap: Researcher, author, and entrepreneur Dr. Jon Koomey highlighted the inefficiency of data centers in his talk "The Rise of Zombie Data Centers," noting that 20-30% of their capacity is stranded and unused. He advocated for organizational changes and technological solutions like digital twins to reduce wasted energy and improve computational effectiveness as AI deployments increase. In "A New Millennium in Multiphysics System Analysis," Cadence Corporate VP Ben Gu explained the company's significant strides in multiphysics system analysis, evolving from chip simulation to a broader application of computational software for simulating various physical systems, including entire data centers. He noted that the latest Cadence venture, a digital twin platform for data center optimization, opened the opportunity to use simulation technology to optimize the efficiency of data centers. Senior Software Engineering Group Director Albert Zeng highlighted the Cadence Reality DC suite's ability to transform data center operations through simulation, emphasizing its multi-phase engine for optimal thermal performance and the integration of AI capabilities for enhanced design and management. A panel discussion titled "Turning AI Factory Blueprints into Reality at the Speed of Light" featured industry experts from NVIDIA, Norman Wright Precision Environmental and Power, NV5, Switch Data Centers, and Cadence, who explored the evolving requirements and multidimensional challenges of AI factories, emphasizing the need for collaboration across the supply chain to achieve high-performing and sustainable data centers. Watch the highlights. Transforming Designs from Chips to Data Centers The OCP Global Summit 2024 has reaffirmed its status as a pivotal event for data center professionals seeking to stay at the forefront of technological advancements. Cadence's contributions, from groundbreaking digital twin technologies to innovative cooling strategies, have shed light on the path forward for efficient, sustainable data centers. For data center professionals, IT managers, and engineers, the insights gained at this summit are invaluable in navigating the challenges and opportunities presented by the burgeoning AI era. Partnering with Arm Arm Total Design Cadence is a member of the Arm Total Design program. At an invitation-only special Arm event, Cadence's VP of Research and Development, Lokesh Korlipara, delivered a presentation focusing on data center challenges and design solutions with Arm Neoverse Compute Subsystem (CSS). The session highlighted: Efficient integration of Arm Neoverse CSS into system on chips (SoCs) with pre-integrated connectivity IP Performance analysis and verification of the Neoverse CSS integration into the SoC through Cadence's System VIP verification suite and automated testbench creation, enhancing both quality and productivity Jumpstarting designs through Cadence's collaboration with Arm for 3D-IC system planning, chiplets, and interposers Design Services readiness and global scale to support and/or deliver the most demanding Arm Neoverse CSS-based SoC design projects Cadence Supports Arm CSS in Arm Booth During the event, Cadence conducted a demo in the Arm booth that showcased the Cadence System VIP verification suite. The demo highlighted automated testbench creation and performance analysis for integrating the Arm CSS into SoCs while enhancing verification quality and productivity. Summary Cadence offers data center solutions for designing everything from the compute and networking chips to the board, racks, data centers, and campuses. Stay connected with Cadence and other industry leaders to continue exploring the innovations set to redefine the future of data centers. Learn More Cadence Joins Arm Total Design Cadence Arm-Based Solutions Cadence Reality Digital Twin Platform

Peripheral Component Interconnect Express (PCIe) is a high-speed interface standard widely used for connecting processors, memory, and peripherals. With the increasing reliance on PCIe to handle sensitive data and critical high-speed data transfer, ensuring data integrity and encryption during verification is the most essential goal. As we know, in the field of verification, randomization is a key technique that drives robust PCIe verification. It introduces unpredictability to simulate real-world conditions and uncover hidden bugs from the design. This blog examines the significance of randomization in PCIe IDE verification, focusing on how it ensures data integrity and encryption reliability, while also highlighting the unique challenges it presents. For more relevant details and understanding on PCIe IDE you can refer to Introducing PCIe's Integrity and Data Encryption Feature . The Importance of Data Integrity and Data Encryption in PCIe Devices Data Integrity : Ensures that the transmitted data arrives unchanged from source to destination. Even minor corruption in data packets can compromise system reliability, making integrity a critical aspect of PCIe verification. Data Encryption : Protects sensitive data from unauthorized access during transmission. Encryption in PCIe follows a standard to secure information while operating at high speeds. Maintaining both data integrity and data encryption at PCIe’s high-speed data transfer rate of 64GT/s in PCIe 6.0 and 128GT/s in PCIe 7.0 is essential for all end point devices. However, validating these mechanisms requires comprehensive testing and verification methodologies, which is where randomization plays a very crucial role. You can refer to Why IDE Security Technology for PCIe and CXL? for more details on this. Randomization in PCIe Verification Randomization refers to the generation of test scenarios with unpredictable inputs and conditions to expose corner cases. In PCIe verification, this technique helps us to ensure that all possible behaviors are tested, including rare or unexpected situations that could cause data corruption or encryption failures that may cause serious hindrances later. So, for PCIe IDE verification, we are considering the randomization that helps us verify behavior more efficiently. Randomization for Data Integrity Verification Here are some approaches of randomized verifications that mimic real-world traffic conditions, uncovering subtle integrity issues that might not surface in normal verification methods. 1. Randomized Packet Injection: This technique randomized data packets and injected into the communication stream between devices. Here we Inject random, malformed, or out-of-sequence packets into the PCIe link and mix valid and invalid IDE-encrypted packets to check the system’s ability to detect and reject unauthorized or invalid packets. Checking if encryption/decryption occurs correctly across packets. On verifying, we check if the system logs proper errors or alerts when encountering invalid packets. It ensures coverage of different data paths and robust protocol check. This technique helps assess the resilience of the IDE feature in PCIe in below terms: (i) Data corruption: Detecting if the system can maintain data integrity. (ii) Encryption failures: Testing the robustness of the encryption under random data injection. (iii) Packet ordering errors: Ensuring reordering does not affect data delivery. 2. Random Errors and Fault Injection: It involves simulating random bit flips, PCRC errors, or protocol violations to help validate the robustness of error detection and correction mechanisms of PCIe. These techniques help assess how well the PCIe IDE implementation: (i) Detects and responds to unexpected errors. (ii) Maintains secure communication under stress. (iii) Follows the PCIe error recovery and reporting mechanisms (AER – Advanced Error Reporting). (iv) Ensures encryption and decryption states stay synchronized across endpoints. 3. Traffic Pattern Randomization: Randomizing the sequence, size, and timing of data packets helps test how the device maintains data integrity under heavy, unpredictable traffic loads. Randomization for Data Encryption Verification Encryption adds complexity to verification, as encrypted data streams are not readable for traditional checks. Randomization becomes essential to test how encryption behaves under different scenarios. Randomization in data encryption verification ensures that vulnerabilities, such as key reuse or predictable patterns, are identified and mitigated. 1. Random Encryption Keys and Payloads: Randomly varying keys and payloads help validate the correctness of encryption without hardcoding assumptions. This ensures that encryption logic behaves correctly across all possible inputs. 2. Randomized Initialization Vectors (IVs): Many encryption protocols require a unique IV for each transaction. Randomized IVs ensure that encryption does not repeat patterns. To understand the IDE Key management flow, we can follow the below diagram that illustrates a detailed example key programming flow using the IDE_KM protocol. Figure 1: IDE_KM Example As Figure 1 shows, the functionality of the IDE_KM protocol involves Start of IDE_KM Session, Device Capability Discovery, Key Request from the Host, Key Programming to PCIe Device, and Key Acknowledgment. First, the Host starts the IDE_KM session by detecting the presence of the PCIe devices; if the device supports the IDE protocol, the system continues with the key programming process. Then a query occurs to discover the device’s encryption capabilities; it ensures whether the device supports dynamic key updates or static keys. Then the host sends a request to the Key Management Entity to obtain a key suitable for the devices. Once the key is obtained, the host programs the key into the IDE Controller on the PCIe endpoint. Both the host and the device now share the same key to encrypt and authenticate traffic. The device acknowledges that it has received and successfully installed the encryption key and the acknowledgment message is sent back to the host. Once both the host and the PCIe endpoint are configured with the key, a secure communication channel is established. From this point, all data transmitted over the PCIe link is encrypted to maintain confidentiality and integrity. IDE_KM plays a crucial role in distributing keys in a secure manner and maintaining encryption and integrity for PCIe transactions. This key programming flow ensures that a secure communication channel is established between the host and the PCIe device. Hence, the Randomized key approach ensures that the encryption does not repeat patterns. 3. Randomization PHE: Partial Header Encryption (PHE) is an additional mechanism added to Integrity and Data Encryption (IDE) in PCIe 6.0. PHE validation using a variety of traffic; incorporating randomization in APIs provided for validating PHE feature can add more robust Encryption to the data. Partial Header Encryption in Integrity and Data Encryption for PCIe has more detailed information on this. Figure 2: High-Level Flow for Partial Header Encryption 4. Randomization on IDE Address Association Register values: IDE Address Association Register 1/2/3 are supposed to be configured considering the memory address range of IDE partner ports. The fields of IDE address registers are split multiple values such as Memory Base Lower, Memory Limit Lower, Memory Base Upper, and Memory Limit Upper. IDE implementation can have multiple register blocks considering addresses with 32 or 64, different registers sizes, 0-255 selective streams, 0-15 address blocks, etc. This Randomization verification can help verify all the corner cases. Please refer to Figure 2. Figure 3: IDE Address Association Register 5. Random Faults During Encryption: Injecting random faults (e.g., dropped packets or timing mismatches) ensures the system can handle disruptions and prevent data leakage. Challenges of IDE Randomization and its Solution Randomization introduces a vast number of scenarios, making it computationally intensive to simulate every possibility. Constrained randomization limits random inputs to valid ranges while still covering edge cases. Again, using coverage-driven verification to ensure critical scenarios are tested without excessive redundancy. Verifying encrypted data with random inputs increases complexity. Encryption masks data, making it hard to verify outputs without compromising security. Here we can implement various IDE checks on the IDE callback to analyze encrypted traffic without decrypting it. Randomization can trigger unexpected failures, which are often difficult to reproduce. By using seed-based randomization, a specific seed generates a repeatable random sequence. This helps in reproducing and analyzing the behavior more precisely. Conclusion Randomization is a powerful technique in PCIe verification, ensuring robust validation of both data integrity and data encryption. It helps us to uncover subtle bugs and edge cases that a non-randomized testing might miss. In Cadence PCIe VIP, we support full-fledged IDE Verification with rigorous randomized verification that ensures data integrity. Robust and reliable encryption mechanisms ensure secure and efficient data communication. However, randomization also brings various challenges, and to overcome them we adopt a combination of constrained randomization, seed-based testing, and coverage-driven verification. As PCIe continues to evolve with higher speeds and focuses on high security demands, our Cadence PCIe VIP ensures it is in line with industry demand and verify high-performance systems that safeguard data in real-world environments with excellence. For more information, you can refer to Verification of Integrity and Data Encryption(IDE) for PCIe Devices and Industry's First Adopted VIP for PCIe 7.0 . More Information: For more info on how Cadence PCIe Verification IP and TripleCheck VIP enables users to confidently verify IDE, see our VIP for PCI Express , VIP for Compute Express Link for and TripleCheck for PCI Express For more information on PCIe in general, and on the various PCI standards, see the PCI-SIG website .

hi,

     I save the waveform file of the oscilloscope as CSV file format.

     Now, I need to use this waveform file as the source of the low-pass filter .

     I searched and read the PSPICE help documents, and did not find any  methods. 

     How to realize it?

     Are there any reference documents or examples?

     Thanks!

Hi,

i am compiling firmware under Windows transfer the binaries and the sources to Linux to simulate/debug there. The problem is that the paths in the DWARF debug info of the .elf file are the absolute Windows paths as set by the compiler so they are useless under Linux. Is it possible to configure mappings of these paths to the Linux paths when simulating/debugging like with e.g. GDB (https://sourceware.org/gdb/current/onlinedocs/gdb/Source-Path.html#index-set-substitute_002dpath)?

thx,

Peter

Hello,

I am new in formal verification and I have a concept question about how to verify an I2C Slave block.

I think the response should be valid for any serial interface which needs to receive information for several clocks before making an action.

The the protocol description is the following: 

I have a serial clock (SCL), Serial Data Input (SDI) and Serial Data Output (SDO), all are ports of the I2C Slave block.

The protocol looks like this:

The first byte which is received by the slave consists in 7bits of sensor address and the 8th bit is the command 0/1 Write/Read.

After the first 8 bits, the slave sends an ACK (SDO = 1 for 1 clock) if the sensor address is correct.

Lets consider only this case, where I want to verify that the slave responds with an ACK if the sensor address is correct.

The only solution I found so far was to use the internal buffer from the block which saves the received bits during 8 clocks. The signal is called shift_s.

I also needed to use internal chip state (state_s) and an internal counter (shift_count_s).

Instead of doing an direct check of the SDO(sdo_o) depending on SDI (sdi_d_i), I used the internal shift_s register.

My question is if my approach is the correct one or there is a possibility to write the verification at a blackbox level.

Below you have the 2 properties: first checks connection from SDI to internal buffer, the second checks the connection between internal buffer and output.

property prop_i2c_sdi_store;
  @(posedge sclk_n_i)
  $past(i2c_bl.state_s == `STATE_RECEIVE_I2C_ADDR)
    |-> i2c_bl.shift_s == byte'({ $past(i2c_bl.shift_s), $past(sdi_d_i)});
endproperty
APF_I2C_CHECK_SDI_STORE: assert property(prop_i2c_sdi_store);

property prop_i2c_sensor_addr(sens_addr_sel, sens_addr);
@(posedge sclk_n_i) (i2c_bl.state_s == `STATE_RECEIVE_I2C_ADDR) && (i2c_addr_i == sens_addr_sel) && (i2c_bl.shift_count_s == 7)
  ##1 (i2c_bl.shift_s inside {sens_addr, sens_addr+1}) |-> sdo_o;
endproperty
APF_I2C_CHECK_SENSOR_ADDR0: assert property(prop_i2c_sensor_addr(0, `I2C_SENSOR_ADDRESS_A0));
APF_I2C_CHECK_SENSOR_ADDR1: assert property(prop_i2c_sensor_addr(1, `I2C_SENSOR_ADDRESS_A1));
APF_I2C_CHECK_SENSOR_ADDR2: assert property(prop_i2c_sensor_addr(2, `I2C_SENSOR_ADDRESS_A2));
APF_I2C_CHECK_SENSOR_ADDR3: assert property(prop_i2c_sensor_addr(3, `I2C_SENSOR_ADDRESS_A3));

PS: i2c_addr_i is address selection for the slave (there are 4 configurable sensor addresses, but this is not important for the case).

Thank you!

This is the 20th installment of The Rationalist, my column for the Times of India.

Amit Shah’s induction into the union cabinet is such an interesting moment. Even partisans who oppose the BJP, as I do, would admit that Shah is a political genius. Under his leadership, the BJP has become an electoral behemoth in the most complicated political landscape in the world. The big question that now arises is this: can Shah do for India what he did for the BJP?

This raises a perplexing question: in the last five years, as the BJP has flourished, India has languished. And yet, the leadership of both the party and the nation are more or less the same. Then why hasn’t the ability to manage the party translated to governing the country?

I would argue that there are two reasons for this. One, the skills required in those two tasks are different. Two, so are the incentives in play.

Let’s look at the skills first. Managing a party like the BJP is, in some ways, like managing a large multinational company. Shah is a master at top-down planning and micro-management. How he went about winning the 2014 elections, described in detail in Prashant Jha’s book How the BJP Wins, should be a Harvard Business School case study. The book describes how he fixed the BJP’s ground game in Uttar Pradesh, picking teams for 147,000 booths in Uttar Pradesh, monitoring them, and keeping them accountable.

Shah looked at the market segmentation in UP, and hit upon his now famous “60% formula”. He realised he could not deliver the votes of Muslims, Yadavs and Jatavs, who were 40% of the population. So he focussed on wooing the other 60%, including non-Yadav OBCs and non-Jatav Dalits. He carried out versions of these caste reconfigurations across states, and according to Jha, covered “over 5 lakh kilometres” between 2014 and 2017, consolidating market share in every state in this country. He nurtured “a pool of a thousand new OBC and Dalit leaders”, going well beyond the posturing of other parties.

That so many Dalits and OBCs voted for the BJP in 2019 is astonishing. Shah went past Mandal politics, managing to subsume previously antagonistic castes and sub-castes into a broad Hindutva identity. And as the BJP increased its depth, it expanded its breadth as well. What it has done in West Bengal, wiping out the Left and weakening Mamata Banerjee, is jaw-dropping. With hindsight, it may one day seem inevitable, but only a madman could have conceived it, and only a genius could have executed it.

Good man to be Home Minister then, eh? Not quite. A country is not like a large company or even a political party. It is much too complex to be managed from the top down, and a control freak is bound to flounder. The approach needed is very different.

Some tasks of governance, it is true, are tailor-made for efficient managers. Building infrastructure, taking care of roads and power, building toilets (even without an underlying drainage system) and PR campaigns can all be executed by good managers. But the deeper tasks of making an economy flourish require a different approach. They need a light touch, not a heavy hand.

The 20th century is full of cautionary tales that show that economies cannot be centrally planned from the top down. Examples of that ‘fatal conceit’, to use my hero Friedrich Hayek’s term, include the Soviet Union, Mao’s China, and even the lady Modi most reminds me of, Indira Gandhi.

The task of the state, when it comes to the economy, is to administer a strong rule of law, and to make sure it is applied equally. No special favours to cronies or special interest groups. Just unleash the natural creativity of the people, and don’t try to micro-manage.

Sadly, the BJP’s impulse, like that of most governments of the past, is a statist one. India should have a small state that does a few things well. Instead, we have a large state that does many things badly, and acts as a parasite on its people.

As it happens, the few things that we should do well are all right up Shah’s managerial alley. For example, the rule of law is effectively absent in India today, especially for the poor. As Home Minister, Shah could fix this if he applied the same zeal to governing India as he did to growing the BJP. But will he?

And here we come to the question of incentives. What drives Amit Shah: maximising power, or serving the nation? What is good for the country will often coincide with what is good for the party – but not always. When they diverge, which path will Shah choose? So much rests on that.

The India Uncut Blog © 2010 Amit Varma. All rights reserved.
Follow me on Twitter.

This is the 24th installment of The Rationalist, my column for the Times of India.

Back in the last decade, I was a cricket journalist for a few years. Then, around 12 years ago, I quit. I was jaded as hell. Every game seemed like déjà vu, nothing new, just another round on the treadmill. Although I would remember her fondly, I thought me and cricket were done.

And then I fell in love again. Cricket has changed in the last few years in glorious ways. There have been new ways of thinking about the game. There have been new ways of playing the game. Every season, new kinds of drama form, new nuances spring up into sight. This is true even of what had once seemed the dullest form of the game, one-day cricket. We are entering into a brave new world, and the team leading us there is England. No matter what happens in the World Cup final today – a single game involves a huge amount of luck – this England side are extraordinary. They are the bridge between eras, leading us into a Golden Age of Cricket.

I know that sounds hyperbolic, so let me stun you further by saying that I give the IPL credit for this. And now, having woken up you up with such a jolt on this lovely Sunday morning, let me explain.

Twenty20 cricket changed the game in two fundamental ways. Both ended up changing one-day cricket. The first was strategy.

When the first T20 games took place, teams applied an ODI template to innings-building: pinch-hit, build, slog. But this was not an optimal approach. In ODIs, teams have 11 players over 50 overs. In T20s, they have 11 players over 20 overs. The equation between resources and constraints is different. This means that the cost of a wicket goes down, and the cost of a dot ball goes up. Critically, it means that the value of aggression rises. A team need not follow the ODI template. In some instances, attacking for all 20 overs – or as I call it, ‘frontloading’ – may be optimal.

West Indies won the T20 World Cup in 2016 by doing just this, and England played similarly. And some sides began to realise was that they had been underestimating the value of aggression in one-day cricket as well.

The second fundamental way in which T20 cricket changed cricket was in terms of skills. The IPL and other leagues brought big money into the game. This changed incentives for budding cricketers. Relatively few people break into Test or ODI cricket, and play for their countries. A much wider pool can aspire to play T20 cricket – which also provides much more money. So it makes sense to spend the hundreds of hours you are in the nets honing T20 skills rather than Test match skills. Go to any nets practice, and you will find many more kids practising innovative aggressive strokes than playing the forward defensive.

As a result, batsmen today have a wider array of attacking strokes than earlier generations. Because every run counts more in T20 cricket, the standard of fielding has also shot up. And bowlers have also reacted to this by expanding their arsenal of tricks. Everyone has had to lift their game.

In one-day cricket, thus, two things have happened. One, there is better strategic understanding about the value of aggression. Two, batsmen are better equipped to act on the aggressive imperative. The game has continued to evolve.

Bowlers have reacted to this with greater aggression on their part, and this ongoing dialogue has been fascinating. The cricket writer Gideon Haigh once told me on my podcast that the 2015 World Cup featured a battle between T20 batting and Test match bowling.

This England team is the high watermark so far. Their aggression does not come from slogging. They bat with a combination of intent and skills that allows them to coast at 6-an-over, without needing to take too many risks. In normal conditions, thus, they can coast to 300 – any hitting they do beyond that is the bonus that takes them to 350 or 400. It’s a whole new level, illustrated by the fact that at one point a few days ago, they had seven consecutive scores of 300 to their name. Look at their scores over the last few years, in fact, and it is clear that this is the greatest batting side in the history of one-day cricket – by a margin.

There have been stumbles in this World Cup, but in the bigger picture, those are outliers. If England have a bad day in the final and New Zealand play their A-game, England might even lose today. But if Captain Morgan’s men play their A-game, they will coast to victory. New Zealand does not have those gears. No other team in the world does – for now.

But one day, they will all have to learn to play like this.

The India Uncut Blog © 2010 Amit Varma. All rights reserved.
Follow me on Twitter.

Read this blog to know how you can easily create and insert connect modules using Spectre AMS Designer with the Verilog-AMS standard language defined by Accellera. (read more)

This blog explores how Virtuoso Studio Net Tracer can help you perform a design review.

We’ll use the net connectivity option, which allows the user to get a clean highlighted net. You can use the Net Tracer tool to highlight the nets. You can find the Net Tracer command under the connectivity pulldown menu in the layout window.

Trace manager and the ability to display different islands on the same net with other colors, you can identify and connect the unconnected islands as you wish.

The Net Tracer utility traces the nets in the physical view (layout). The trace is a highlighted net, which is a non-selectable object. The Net Tracer utility is available from Virtuoso Layout Suite XL onwards. You can use this utility based on your specific needs and preferences.

For a better understanding of the Net Tracer feature, let’s see one scenario between the circuit designer and layout engineer for a layout design review.

Circuit designer: Can we go through the routed input nets “inm” and “inp”?

Layout engineer: From the below layout view where they are highlighted using the XL connectivity, today I will use Net Tracer utility for the design review.

Circuit designer: I have never heard of this feature. Let's see how it works.

Layout engineer: Sure, now we turn on the Net Tracer toolbar using the below option.

You see the Net Tracer options form here:

As you can see on my screen, I have opened the layout view and engaged the Net Tracer utility.

Net Tracer allows shapes to be traced on a net in two tracing modes, namely, physical and logical, where shapes on the same net are physically or logically connected.

Physical tracing gathers all the shapes physically connected on the same net.

Logical tracing gathers all the shapes assigned to the same net. It highlights the net as in the source design (schematic). It will highlight shapes on the same net, even if they are isolated shapes that are not physically connected.

For this scenario, let us use physical tracing for input nets “inm” and “inp."

Highlighted nets are shown below:

Net “inm”                    Net “inp”                   Nets “inm” and “inp” 

Net Tracer has features like physical and logical tracing, preview, step-by-step mode, ease of tracing a net on a shape out of multiple underlying shapes, and so on.

Let us explore logical tracing for output nets “outm” and “outp”:

Here, you can see how to enable true color and halo before enabling logical tracing to identify the metal route. After enabling the true color halo, enable the logical trace.

Here, I am opening the trace manager to search “outm” and “outp” and click trace. That will trace the particular nets as shown.

Net Tracer has a preview feature, which is helpful in terms of the number of previewed objects. This preview capability hints at how the trace would appear when you create it. This useful feature in Virtuoso Studio highlights both completed and incomplete nets, helping the user better understand the status of the highlighted nets.

Circuit designer: Thanks for the design review. You have done good work. Net Tracer clearly shows both types of tracing, and it was even easy for the circuit designer to understand.

Layout engineer: Let me share the link to the Net Tracer RAK, where other layout engineers can explore many more amazing features of the Net Tracer.

Do You Have Access to the Cadence Support Portal?

If not, follow the steps below to create your account.

• On the Cadence Support portal, select Register Now and provide the requested information on the Registration page.
• You will need an email address and host ID to sign up.
• If you need help with registration, contact support@cadence.com.

To stay up to date with the latest news and information about Cadence training and webinars, subscribe to the Cadence Training emails.

If you have questions about courses, schedules, online, public, or live onsite training, reach out to us at Cadence Training.

For any questions, general feedback, or future blog topic suggestions, please leave a comment.

Become Cadence Certified

Cadence Training Services now offers digital badges for this training course. These badges indicate proficiency in a certain technology or skill and give you a way to validate your expertise to managers and potential employers. You can highlight your expertise by adding these digital badges to your email signature or any social media platform, such as Facebook or LinkedIn. To become Cadence Certified, you can find additional information here.

Related Resources

About Knowledge Booster Training Bytes

Knowledge Booster Training Bytes is an online journal that relays information about Cadence Training videos, online courses, and upcoming webinars that are available in the Learning section of the Cadence Learning and Support portal. This blog category brings you direct links to these videos, courses, and other related material on a regular basis.

Sandhya.

On behalf of the Cadence Training team

Hello Fellow PCB Designers,

We have a 10 layer PCB design that originated in Pads and was converted over to Allegro 17.4, this is an old design but is manufacturable and works perfectly fine.  When I try to generate a Gerber for the Top or Bottom layers

the Gerber comes out fine.  But Most of the middle layers are Etch's and via's for power and grounds, but the Gerber's come mostly blank, there might be some details, but in the Gerber view everything is displayed correctly.

The design does have many close spacings, I have not changed anything in the constrains manager yet, turned off a lot of the DRC's, but thinking there might be something wrong with the constrains.

  I find that the CSet is set to 2_18, not sure yet what this means, also there are many of these definitions, PCS 3,4,5,ect, are the same as CSet 2_18 any suggestions would be great, we are currently looking into this, have seen

that even small change in constraint manager can cause long processing and even Allegro crashing, this is a large project.

Thanks Much, Thanks, Mike Pollock.

Hi All

I am looking for the functions which are different about OrCAD Professional and Allegro tier.

is there any resource?

regard

When using Shape > Create Bounding Shape on an arc, the outer side works well, but on the inner side it just draws a straight line from the begging to the end of the curve.  Is anyone aware of a fix for this?

I'm attaching  a picture as an example, it works great on lines.

Hi

In the environment I'm currently working, axes are shown for schematic, symbol, and layout views.For schematics and symbols, I'd prefer a dim gray, such that the axes are just visible but not dominant. For the layout, I'd prefer a brighter color. Is there a way to realize this? So far when I change the color of the 'axis' layer in the display resource editor, the axes in all three views get changed together:

Thanks very much for your input!

IC 23.1-64b.ISR8.40

Hi all, I'm trying to run an stb analysis in a dspf extracted view via Probe terminal. The instance exist in the dspf and I already prepended the X that is placed in the dspf extraction.

Spectre complains with the following error:

Error found by spectre during STB analysis `stb'.
    ERROR (SPECTRE-16408): The probe parameter must be specified to perform stability analysis.

Analysis `stb' was terminated prematurely due to an error.

What is missing here?

Hello,


I would like to use the simulation software xrun/simvision that comes with XCELIUM. We are currently using classroom licenses and want to disable all ip addresses on the student pcs except the license server ip. We want to make sure that students cannot copy confidential data from the Cadence tools.


Problem:

When I launch the xrun simulation while all ip addresses are blocked, it starts but the performance is very slow. The GUI starts after 5 minutes and the simulation is ready after 10 minutes. The interesting thing is that when I enable all blocked ip addresses, everything works at a reasonable speed.

Terminal Output (execution without internet connection):

xrun -gui design.vhd

waiting for SimVision/Verisium Debug to connect...


Is there a way to run the simulation tools without an Internet connection? Or can you give me the ip addresses that are used by the simulation tools so that I can enable only those specific ips?


Regards,

Max

Hello Everybody

Recently, I want to design a high output Power Amplifier at 2.4GHz using TSMC 1P6M CMOS Bulk Process. I use its nmos_rf_25_6t transistor model to determine the approximate mosfet size

I use the most common Common-Source Differential Amplifier topology with neutralizing capacitor to improve its stability and power gain performance

Because I want to output large power, the size of mosfet is very large, the gate width is about 2mm, when I perform harmonic balance analysis, everything is alright, the OP1dB is about 28dBm (0.63Watt)

But When I perform Transient simulation, the magnitude of voltage and current waveform at the saturation point is too small, for voltgae, Vpeaking is about 50mV, for current, Ipeaking is about 5mA

I assume some reasons: the bsim4 model is not complete/ the virtuoso version is wrong (My virtuoso version is IC6.1.7-64b.500.21)/the spectre version is wrong (spectre version is 15.1.0 32bit)/the MMSIM version is wrong/Transient Simulation setting is wrong (the algorithm is select gear2only, but when I select other, like: trap, the results have no difference), the maxstep I set 5ps, minstep I set 2ps to improve simulation speed, I think this step is much smaller than the fundamental period (1/2.4e9≈416ps)

I have no idea how to solve this problem, please help me! Thank you very very much!

Hi,

I'm searching for a way to get a quick overview of too low cpk-values after a montecarlo sim. The non-MC results have the spec and thus the easy/understandable red/green/(yellow) colorcoding, but for MC sims I don't get a highlight for high variations inside the limits.

Is this possible (besides copying each expression into avg()+3*std()) and ..-..)?

It would be really handy to scan through finished sims...

(My final application is then to export the table for my reports and documentation...)

Regards,

leo

Hi

I have a rather strange question - is there a way to tell layout XL to NOT place the error/warning markers on a design when I open a cell?  I do a lot of my layout by using arrays from placed instances and create mosaics that completely ignore the metadata that Layout XL uses with its bindings with schematic (and instances get deleted etc. but I do like using it to generate all my pins etc.) and it's just really annoying when I open a design that I know is LVS clean and since the connectivity metadata is all screwed up (because I did not use it to actually complete the layout) I have a design that's just blinking at me at every gate, source and drain.  I typically delete them at the high level heirarchically but the second I go in and modify something and come back up it places all of them again.  I know that if I flatten all the p cells it goes away but sometimes it's nice to have that piece of metadata but that's about it.  Is there a way to "break" the features of XL like this?  I realize what a weird question this is but it's becoming more of an issue since we moved to IC 23 from IC 6 where there is no longer a layout L that I can use free from these annoyances that can't use any of the connectivity metadata.

Thanks

Chris

Hello everyone,

I hope you're all doing well. I’ve set up two testbenches (TB1 and TB2) for my Design Under Test (DUT) using Cadence IC6.1.8-64b.500.21 tools, as shown in the attached figure. The DUT has multiple views available: schematic, Calibre, Maestro, and Symbol, and each testbench uses the same DUT in different scenarios. Currently, I have to manually switch between these views, but I would like to streamline this process.

My goal is to use a single config view that allows me to switch between the schematic and the extracted (Calibre) views. Ideally, I would like to have a configuration file where making changes once would update both testbenches (TB1 and TB2) automatically. In other words, when I modify one config, both testbenches should reflect this update for a single simulation run.

I would really appreciate it if you could guide me on the following:

1. How to create a config view for my DUT that can be used to easily switch between the schematic and extracted views, impacting both TB1 and TB2.
2. Where to specify view priorities or other settings to control which view is used during simulation.
3. Best practices for using a config file in this scenario, so that it ensures consistency across multiple testbenches.

Please refer to the attached figure to get a better understanding of the setup I’m using, where both TB1 and TB2 include the same DUT with multiple available views.

Thank you so much for your time and assistance!

Hi,

Do anyone know if it's possible in simvision waveform viewer to see a timestamp of where uvm_errors/$errors occurred in a simulation via post-processing? 

Cheers,

Antonio

Hello,

I have been running this `uvm_reg_hw_reset_seq` sequence for the AHB protocol. My UVM Adapter looks like:

Issue: When I use basic reg.write, my write access are working well, as that is managed by the driver i.e. once adapter gives the packet to the driver, the driver supplies the address and the control signals to the DUT on the first clock cycle and then the write data on the next clock cycle. But when I am performing the read operation, somehow the UVM adapter is reading the data at the same clock cycle where read address + Controls are supplied and this is triggering read failure messages from the `uvm_reg_hw_reset_seq` sequence. What should I modify in the driver/sequencer/adapter so that the UVM adapter can read the data on the next cycle instead of the same clock cycle.

Just FYI: The waveforms of the read operation are correct, it is just the Adapter and the `uvm_reg_hw_reset_seq`. The AHB Driver + AHB Monitor is fully proven and verified to be working correctly.

Hi, I'm using the xcelium simulator to simulate a testbench, in which I first stimulate my design to do something (part "A") and then do a direct follow-up test on the design (part "B").

I need two things from this testbench: the results of the test (part "B", passed/failed) and coverage information, but the coverage information should only include part A and explicitly not part B.

I could do the following: run the testbench with part A and B, get the "passed/failed" result of the test and then follow up another simulator run with another testbench, that only includes part A and get the coverage information from that simulation run.

Is there a way to force xcelium to give me the coverage information of only a part of the simulation? Ideally, I would like to write the verilog code of my testbench to look something like this:

• do A
• dump coverage information
• do B

But maybe there is another way to tell xcelium to consider only part of the testbench for the coverage information. I did have a look at the manual, but was not able to find something useful for this problem. Any ideas?

Hi

I have tried using "add net constraints" command to place one-cold constraints on a tristate enable bus. In the command line we need to specify the "net pathname" on which the constraints are to be enforced.

The bus here is 20-bit. How should the net pathname be specified to make this 20-bit bus signals one_hot or one_cold.

The bus was declared as follows:
ten_bus [19:0]

The command I used was

add net constraints one_hot /ren_bus[19]

What would the above command mean?
Should we not specify all the nets' pathnames on the bus?
Is it sufficient to specify the pathname of one net on the bus?
I could not get much info regarding the functionality of this command. I would be obliged if anyone can throw some light.

Thanks
Prasad.

When posting code to the forums, copy from a text editor such as notepad, not from word or Outlook. Be sure to click the HTML tab BEFORE you paste your text.

Click on the "html" mode tab on your "reply" dialog box. Then wrap your text with like this:

pasted text

NOTE: Do not put a space in the I have done that here so it will show up as text. Also, be sure to click the HTML tab BEFORE you paste your text. This is how it will look when coded correctly pasted text

The two macros below introduce new syntax for adding definitions to more than one 'when' determinant value at the same time. The first macro overloads 'extend' keyword and the second is the equivalent for 'when' keyword.

A use example:

extend [HUGE, BIG] packet {
    // definitions that pertain to these subtypes
};

The above code would be expanded in the following (naive) way:

extend HUGE packet {
    // definitions that pertain to these subtypes
};
extend BIG packet {
    // definitions that pertain to these subtypes
};


The macros code:

define 'statement>
       "extend ['name>,...] 'name> ({;...})" as computed {
    for each in 'names> do {
        result = appendf("%sextend %s %s %s;",result,it,'name>,);
    };
    result = appendf("{%s}",result); // required only for versions 6.1.1 or earlier
};

define 'struct_member>
       "when ['name>,...] 'name> ({;...})" as computed {
    for each in 'names> do {
        result = appendf("%swhen %s %s %s;",result,it,'name>,);
    };
    result = appendf("{%s}",result); // required only for versions 6.1.1 or earlier
};

Please include a brief summary of how to use it.

Hi, I am uploading a register class, which can be used for modeling hardware registers. I am uploading the source code and examples on how to run it. I also have a user guide which has all the APIs listed and explained. The user guide is ARV.pdf in the attached tar file. I have named the class ARV, which stands for Architect's Register View. It has got very good randomization and coverage features. Users have told me that its better than RAL. You can download it from http://verisilica.info/ARV.php
. There is a limit of 750KB in this cadence website. The ARV file is 4MB. That is why, I am uploading it at this site. I have a big pdf documentation and a doxygen documentation there. That is the reason for the bigger file size. The password to open the ZIP file is ovm_arv. I hope, everyone will use these classes.

Please contact me for any help.
Regards ANil

Hi everybody,

The attached package is a tiny code example with a demo for an upcoming Team Specman blog post about writing macros.

Hilmar

In a nutshell, tags allows you to navigate through program code distributed over multiple files effectively. e.g if you see a function call or a struct in e-code and want to "jump" to the definition (which may be in a different file) then you just hit CTRL+] in Vim! Pressing CTRL+t will take you back where you came from. Check out http://vim.wikia.com/wiki/Browsing_programs_with_tags#Using_tags if you want to learn more about how to use tags with Vim.

This utility can generate tags file for your e files. It can either walk through e import order, a directory recursively or all directories on SPECMAN_PATH recursively! The tags file will have tags for struct, unit, types, events, defines, fields, variables, etc.

For help and some examples, just run ctags4e -help.

Attached is the latest emacs mode for e/Specman - version 1.23

Please follow the install instructions in the top section of the actual file
(after unzipping it) to install/load this package with your emacs.

Can anyone tell me how i can supress few strings or integers while reading with $sscanf.

I read a line from a file into a string. there are few strings and integers seperated by white spaces in the line. I am interested in one string which comes at postion 5 in the line. how can i suppress all other strings and integers with $scanf.

i tried the following syntax but it dint work.

 $sscanf(line,"* * * * %s",string_arg);

i am tring to supress first 4 integers/strings in the line.

Hello,

I have a question I want to create a cover that consists a sparse values, pre-computed (a list or define) for example l = {1; 4; 7; 9; 2048; 700} I'd like to cover that data a (uint(bits:16)) had those values, Any suggestion on how to achieve this, I'd prefer to stay away from macros, and avoid to write a lot of code

struct inst {

  data :uint(bits:16);
  opcode :uint(bits:16);
  !valid_data : list of uint(bits:16) = {0; 12; 10; 700; 890; 293;};
  event data_e;
  event opcode_e;

  cover data_e is {
     item data using radix = HEX, ranges = {
     //I dont want to write all of this
     range([0], "My range1");
     range([10], "My range2");
     //... many values in between
    range([700], "My rangen");
    };

    item opcode;

   cross data, opcode;
};

post_generate() is also {
    emit data_e;
};
};

Join this insightful on-demand webinar event "SI/PI Simulation and Measurement Correlation Forum" available through Signal Integrity Journal that features industry expert presentations ranging from chip to package to complex board designs.(read more)